Commit Graph

90 Commits

Author SHA1 Message Date
Christoffer Dall
40d225009e arm_gic: Keep track of SGI sources
Right now the arm gic emulation doesn't keep track of the source of an
SGI (which apparently Linux guests don't use, or they're fine with
assuming CPU 0 always).

Add the necessary matrix on the GICState structure and maintain the data
when setting and clearing the pending state of an IRQ and make the state
visible to the guest.

Note that we always choose to present the source as the lowest-numbered
CPU in case multiple cores have signalled the same SGI number to a core
on the system.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-08 14:47:28 +00:00
Christoffer Dall
8d999995e4 arm_gic: Fix GIC pending behavior
The existing implementation of the pending behavior in gic_set_irq,
gic_complete_irq, and the distributor pending set/clear registers does
not follow the semantics of the GICv2.0 specs, but may implement the
11MPCore support.  Therefore, maintain the existing semantics for
11MPCore and v7M NVIC and change the behavior to be in accordance with
the GICv2.0 specs for "generic implementations" (s->revision == 1 ||
s->revision == 2).

Generic implementations distinguish between setting a level-triggered
interrupt pending through writes to the GICD_ISPENDR and when hardware
raises the interrupt line.  Writing to the GICD_ICPENDR will not cause
the interrupt to become non-pending if the line is still active, and
conversely, if the line is deactivated but the interrupt is marked as
pending through a write to GICD_ISPENDR, the interrupt remains pending.
Handle this situation in the GIC_TEST_PENDING (which now becomes a
static inline named gic_test_pending) and let the 'pending' field
correspond only to the latched state of the D-flip flop in the GICv2.0
specs Figure 4-10.

The following changes are added:

gic_test_pending:
Make this a static inline and split out the 11MPCore from the generic
behavior.  For the generic behavior, consider interrupts pending if:
    ((s->irq_state[irq].pending & (cm) != 0) ||
       (!GIC_TEST_EDGE_TRIGGER(irq) && GIC_TEST_LEVEL(irq, cm))

gic_set_irq:
Split out the 11MPCore from the generic behavior.  For the generic
behavior, always GIC_SET_LEVEL() on positive level, but only
GIC_SET_PENDING for edge-triggered interrupts and always simply
GIC_CLEAR_LEVEL() on negative level.

gic_complete_irq:
Only resample the line for line-triggered interrupts on an 11MPCore.
Generic implementations will sample the line directly in
gic_test_pending().

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-08 14:47:28 +00:00
Christoffer Dall
5b0adce156 arm_gic: Fix GICD_ICPENDR and GICD_ISPENDR writes
Fix two bugs that would allow changing the state of SGIs through the
ICPENDR and ISPENDRs.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-31 14:47:38 +00:00
Christoffer Dall
41ab7b5510 arm_gic: Introduce define for GIC_NR_SGIS
Instead of hardcoding 16 various places in the code, use a define to
make it more clear what is going on.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-31 14:47:38 +00:00
Anthony Liguori
c06f13c6da QOM infrastructure fixes and device conversions
* QOM interface fixes and unit test
 * Device no_user sanitization and documentation
 * Device error reporting improvement
 * Conversion of APIC, ICC, IOAPIC to QOM realization model
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSub6FAAoJEPou0S0+fgE/JGcP/RvIMVyldoUN1buS+ynXkNGS
 UXCwnGGwE6dw7V8eTHxgm7vj1SznaIFZd1jxhbU/PSRn7SkLjHhM4Ei5Nu06nsJD
 Dwe22muiGxPIucnwhhuyPni9gP386yR7/4cwqMqvEuB696ZO7tdcMQ4PxwMWW6GN
 8XsgF/3nlNFYTTxkG5KhmqqYEQdoQc5aloR7BZiziNaSIXLgIKAFp/T3vl+cwOyV
 j2N4Wq+egPNA821Y+sb9V8ZDkwQamE4qsSdIvWSaR24vFEQ8D+U6Sll2qkfcKo4H
 dmVu27OYFGJ4hJfyNoJ+7RKF1ET+IcmPW6Hcdri0CZNg5f3rHWur3mvasEMB3I3S
 sSQNfItp2bSj0LlTnOcbjE7kP3DTrunAoQ9TJaHo9N94sjXwr8EnCIwHqOZODZbr
 j07uKaRyQp4BCSQwP5QP4XEirLvzJOYCxCmT9pXELW/DMjgzjl1XgZVtEowvzHx4
 JNoF9mVGjVLDdwb9Tm+nR+9dQsNiGyF7HUYfIf1EwKshp6kwqOmO+YkNKq05kfRN
 0GhQB5exB6xN4zUqZTQ544WxB+hls6bOXpOlbKAEWQWpJ2Gj2hlBYTPCuFMwWrfl
 rH0jhC9zzlNqRyTUN+KZjU3GTa0T6neOSIXtDiS/VXWKDEV35zohYgwdpAfvpse2
 61a4MkgXwy7eqUeZ0Jqu
 =WrhM
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging

QOM infrastructure fixes and device conversions

* QOM interface fixes and unit test
* Device no_user sanitization and documentation
* Device error reporting improvement
* Conversion of APIC, ICC, IOAPIC to QOM realization model

# gpg: Signature made Tue 24 Dec 2013 09:04:05 AM PST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 174F 0347 1BCC 221A 6175  6F96 FA2E D12D 3E7E 013F

* afaerber/tags/qom-devices-for-anthony: (24 commits)
  qdev-monitor: Improve error message for -device nonexistant
  ioapic: QOM'ify ioapic
  ioapic: Cleanup for QOM'ification
  icc_bus: QOM'ify ICC
  apic: QOM'ify APIC
  apic: Cleanup for QOM'ification
  qdev: Drop misleading qbus_free() function
  qom: Detect bad reentrance during object_class_foreach()
  tests: Test QOM interface casting
  qom: Do not register interface "types" in the type table and fix names
  qom: Split out object and class caches
  qdev: Document that pointer properties kill device_add
  hw: cannot_instantiate_with_device_add_yet due to pointer props
  qdev-monitor: Avoid device_add crashing on non-device driver name
  qdev: Do not let the user try to device_add when it cannot work
  isa: Clean up use of cannot_instantiate_with_device_add_yet
  vt82c686: Clean up use of cannot_instantiate_with_device_add_yet
  piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yet
  ich9: Document why cannot_instantiate_with_device_add_yet
  pci-host: Consistently set cannot_instantiate_with_device_add_yet
  ...
2014-01-09 11:24:48 -08:00
Christoffer Dall
9df90ad078 hw: arm_gic: Introduce gic_set_priority function
To make the code slightly cleaner to look at and make the save/restore
code easier to understand, introduce this function to set the priority of
interrupts.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1387606179-22709-3-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:22 +00:00
Christoffer Dall
04050c5c6a arm_gic: Rename GIC_X_TRIGGER to GIC_X_EDGE_TRIGGER
TRIGGER can really mean mean anything (e.g. was it triggered, is it
level-triggered, is it edge-triggered, etc.).  Rename to EDGE_TRIGGER to
make the code comprehensible without looking up the data structure.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1387606179-22709-2-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:22 +00:00
xiaoqiang zhao
db0f888848 ioapic: QOM'ify ioapic
Convert 'init' function to QOM's 'realize' for ioapic and kvm-ioapic.
Change variable 'ioapic_no' from static to global. Then we can drop
the 'instance_no' function argument.

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-24 18:02:18 +01:00
xiaoqiang zhao
f97718584b ioapic: Cleanup for QOM'ification
Some cleanups:
* ioapic_common.c: Rename 'register_types' to 'ioapic_common_register_types'
* Replace inline 'DEVICE(s)' with local 'DeviceState *dev' variable

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-24 18:02:18 +01:00
xiaoqiang zhao
494c271784 icc_bus: QOM'ify ICC
For consistency, QOM'ify APIC's parent bus.

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-24 18:02:18 +01:00
xiaoqiang zhao
ff6986ce61 apic: QOM'ify APIC
Convert 'init' function to QOM's 'realize' for apic, kvm/apic and
xen/xen_apic.

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-24 18:02:18 +01:00
xiaoqiang zhao
d3b0c9e90a apic: Cleanup for QOM'ification
Do some cleanup, including:
1. Remove DO_UPCAST() for APICCommonState
2. Change DeviceState pointers from 'd' to 'dev', better to understand
3. Rename 'register_types' to specifically 'apic_common_register_types'

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-24 18:02:18 +01:00
Markus Armbruster
1b111dc121 hw: cannot_instantiate_with_device_add_yet due to pointer props
Pointer properties can be set only by code, not by device_add.  A
device with a pointer property can work with device_add only when the
property may remain null.

This is the case for property "interrupt_vector" of device
"etraxfs,pic".  Add a comment there.

Set cannot_instantiate_with_device_add_yet for the other devices with
pointer properties, with a comment explaining why.

Juha Riihimäki and Peter Maydell deserve my thanks for making "pointer
property must not remain null" blatantly obvious in the OMAP devices.

Only device "smbus-eeprom" is actually changed.  The others are all
sysbus devices, which get cannot_instantiate_with_device_add_yet set
in their abstract base's class init function.  Setting it again in
their class init function is technically redundant, but serves as
insurance for when sysbus devices become available with device_add,
and as documentation.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for ETRAX)
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-24 17:27:17 +01:00
Markus Armbruster
f3b176402f isa: Clean up use of cannot_instantiate_with_device_add_yet
Drop it when there's no obvious reason why device_add could not work.
Else keep and document why.

* isa-fdc: drop

* i8042: drop, even though its I/O base is hardcoded (because you
  could conceivably still add one to a board that has none), and even
  though PC board code wires up the A20 line (because that wiring is
  optional)

* port92: keep because it needs additional wiring by port92_init()

* mc146818rtc: keep because it needs to be wired up by rtc_init()

* m48t59_isa: keep because needs to be wired up by m48t59_init_isa()

* isa-pit, kvm-pit: keep (in their abstract base pic-common) because
  the PIT needs additional wiring by board code, depending on HPET
  presence

* pcspk: keep because of pointer property pit, and because realize
  sets global pcspk_state

* vmmouse: keep because of pointer property ps2_mouse

* vmport: keep because realize sets global port_state

* isa-i8259, kvm-i8259: keep (in their abstract base pic-common),
  because the PICs' IRQ input lines are set up by board code, and the
  wiring of the slave to the master is hard-coded in device model code

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:23 +01:00
Markus Armbruster
f37a4374ba apic: Document why cannot_instantiate_with_device_add_yet
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:23 +01:00
Markus Armbruster
837d37167d sysbus: Set cannot_instantiate_with_device_add_yet
device_add plugs devices into suitable bus.  For "real" buses, that
actually connects the device.  For sysbus, the connections need to be
made separately, and device_add can't do that.  The device would be
left unconnected, and could not possibly work.

Quite a few, but not all sysbus devices already set
cannot_instantiate_with_device_add_yet in their class init function.

Set it in their abstract base's class init function
sysbus_device_class_init(), and remove the now redundant assignments
from device class init functions.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:22 +01:00
Markus Armbruster
efec3dd631 qdev: Replace no_user by cannot_instantiate_with_device_add_yet
In an ideal world, machines can be built by wiring devices together
with configuration, not code.  Unfortunately, that's not the world we
live in right now.  We still have quite a few devices that need to be
wired up by code.  If you try to device_add such a device, it'll fail
in sometimes mysterious ways.  If you're lucky, you get an
unmysterious immediate crash.

To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dad.  The device model is still omitted from
help, but is available anyway.

Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.

This commit clarifies no_user's purpose.  Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy.  While there, make it
bool.

Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale.  The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.

With that done, the regression fix is hopefully acceptable.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:22 +01:00
Alexey Kardashevskiy
a64d325df1 spapr-rtas: replace return code constants with macros
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20 01:57:59 +01:00
liguang
c3931ee8b4 hw/intc: add allwinner A10 interrupt controller
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387159292-10436-4-git-send-email-lig.fnst@cn.fujitsu.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 20:12:51 +00:00
Andreas Färber
ce31825de6 realview_gic: Prepare for QOM embedding
Move state struct, type constant and cast macro to a new header.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 17:47:30 +01:00
Andreas Färber
612daf0628 realview_gic: Convert to QOM realize
Embed GICState and replace SysBus initfn with realizefn.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 17:47:30 +01:00
Andreas Färber
83728796ad arm_gic: Extract headers hw/intc/arm_gic{,_common}.h
Rename NCPU to GIC_NCPU and move GICState away from gic_internal.h.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 17:47:29 +01:00
Alexey Kardashevskiy
9554233c9b xics-kvm: enable irqfd for MSI
This enables IRQFD support for sPAPR. The feature decreases the latency
of interrupt handling.

To enable IRQFD for MSI, this sets kvm_gsi_direct_mapping to true which
enables direct MSI mapping.

To enable IRQFD for LSI (level triggered INTx interrupts), a PCI host bus
callback is required. The patch for that is coming next.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:47 +02:00
Benjamin Herrenschmidt
5d87e4b74a xics: Implement H_XIRR_X
This implements H_XIRR_X hypercall in addition to H_XIRR as
it is mandatory for PAPR+ and there is no way for the guest to
detect whether it is supported or not so just add it.

As the Partition Adjunct Option is not supported at the moment,
the CPPR parameter of the hypercall is ignored.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:47 +02:00
Benjamin Herrenschmidt
075edbe3ba xics: Implement H_IPOLL
This adds support for the H_IPOLL hypercall which the guest
uses to poll for a pending interrupt. This hypercall is
mandatory for PAPR+ and there is no way for the guest to
detect whether it is supported or not so just add it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:47 +02:00
David Gibson
11ad93f681 xics-kvm: Support for in-kernel XICS interrupt controller
Recent (host) kernels support emulating the PAPR defined "XICS" interrupt
controller system within KVM.  This patch allows qemu to initialize and
configure the in-kernel XICS, and keep its state in sync with qemu's XICS
state as necessary.

This should give considerable performance improvements.  e.g. on a simple
IPI ping-pong test between hardware threads, using qemu XICS gives us
around 5,000 irqs/second, whereas the in-kernel XICS gives us around
70,000 irqs/s on the same hardware configuration.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[Mike Qiu <qiudayu@linux.vnet.ibm.com>: fixed mistype which caused ics_set_kvm_state() to fail]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:47 +02:00
Alexey Kardashevskiy
5eb92ccc3f xics: add cpu_setup callback
This adds a cpu_setup callback to the XICS device class (as XICS-KVM
will do it different), xics_cpu_setup() will call it if it is set.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:47 +02:00
Alexey Kardashevskiy
5a3d7b23ba xics: split to xics and xics-common
The upcoming XICS-KVM support will use bits of emulated XICS code.
So this introduces new level of hierarchy - "xics-common" class. Both
emulated XICS and XICS-KVM will inherit from it and override class
callbacks when required.

The new "xics-common" class implements:
1. replaces static "nr_irqs" and "nr_servers" properties with
the dynamic ones and adds callbacks to be executed when properties
are set.
2. xics_cpu_setup() callback renamed to xics_common_cpu_setup() as
it is a common part for both XICS'es
3. xics_reset() renamed to xics_common_reset() for the same reason.

The emulated XICS changes:
1. the part of xics_realize() which creates ICPs is moved to
the "nr_servers" property callback as realize() is too late to
create/initialize devices and instance_init() is too early to create
devices as the number of child devices comes via the "nr_servers"
property.
2. added ics_initfn() which does a little part of what xics_realize() did.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:47 +02:00
Alexey Kardashevskiy
456df19cf7 xics: add missing const specifiers to TypeInfo
This adds missing const specifiers to ICS and ICP TypeInfo's.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:47 +02:00
Alexey Kardashevskiy
b45ff2d942 xics: convert init() to realize()
This fixes XICS according new QOM rules.

This converts ICS's init() callbacks to realize().

This converts legacy qdev_init_nofail() to property_set(realized).

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:47 +02:00
Alexey Kardashevskiy
d1b5682d88 xics: add pre_save/post_load dispatchers
The upcoming support of in-kernel XICS will redefine migration callbacks
for both ICS and ICP so classes and callback pointers are added.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:46 +02:00
Alexey Kardashevskiy
9ccff2a4d6 xics: replace fprintf with error_report
This replaces old-style fprintf with new style error_report.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:46 +02:00
Alexey Kardashevskiy
8ffe04ed2e xics: move reset and cpu_setup
This simple change makes following patches nicer.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-25 23:25:46 +02:00
Anthony Liguori
5cff81f098 QOM device refactorings
* Fix QOM and ISA documentation errors
 * Extend object_initialize() et al. to check the instance size
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJSIPBUAAoJEPou0S0+fgE/Wo0QAISAHVdHBvG7YzrgnpX89hCC
 MCqk5ny0FDZtlJXI5mqitgtBC0aqdhwgRxxfxjZ0/g7e8NysPUkWU9Zn7b/6WWKu
 A4ckRqxAVR6ZR0TNX9XvcoMoaebN0v5cfXDGjjqizs8HXdfs1bbAK5husMTka5df
 qDgRoFPEd1NmA/qpTu7EK74dIRkiB0o5c7Iyc8tNdkFK6it3fn8FW4fL0mk/61dc
 5VwZaIb1UMg8RAh/LMbdnIanWHYM8Yg7DMljdA4frZ53x5R82HxedfGB36L7YRwF
 GlgjxUn+/M1ZFdnzlX+cc330q82K0Tg3C94su1tR/3FuY+Da/9f97/e5WAYIN3v1
 peneh6szGemqRJD1TxBxvoq2GDHVIgx7xcsHjyOWfy08XDcO0UUF7WU1dNddhEl8
 9DX1tihSZJNugKoB2QNBZWcn1FPVAnxpbUfsAt/m1kdbxGPnOM2McEIOwabcQhNl
 odht/aEKB5A8TeRxFKBwozMXxFjh7AX2m8/YsQlApBWKefIV3411/WmO2tEg5kts
 1vO5ZyBM8lOoO5QK/Uvqne0hi/8hALyoO3v9e2IIAd3yE9hYUhk/sQ5our/bfW+M
 auiaoTcVvpFac1nBTsvY4Be1e+B2xqMMxLpsvsmENHcEUCOcAsbCXG/t1NkJR66+
 ZQLaX5ioxgd37zKIY8dT
 =LiUs
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging

QOM device refactorings

* Fix QOM and ISA documentation errors
* Extend object_initialize() et al. to check the instance size

# gpg: Signature made Fri 30 Aug 2013 02:19:48 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (14) and others
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony:
  isa: Fix documentation of isa_register_portio_list()
  qom: Assert instance size in object_initialize_with_type()
  qom: Pass available size to object_initialize()
  qdev: Pass size to qbus_create_inplace()
  virtio-mmio: Pass size to virtio_mmio_bus_new()
  virtio-ccw: Pass size to virtio_ccw_bus_new()
  s390-virtio-bus: Pass size to virtio_s390_bus_new()
  virtio-pci: Pass size to virtio_pci_bus_new()
  usb: Pass size to usb_bus_new()
  scsi: Pass size to scsi_bus_new()
  pci: Pass size to pci_bus_new_inplace()
  ide: Pass size to ide_bus_new()
  ipack: Pass size to ipack_bus_new_inplace()
  intel-hda: Pass size to hda_codec_bus_init()
  qom: Fix object_initialize_with_type() argument name in documentation
  virtio: Remove unnecessary OBJECT() casts
  object: Fix typo in qom/object.h
2013-09-03 12:30:51 -05:00
Alexey Kardashevskiy
33a0e5d8c5 xics: move registration of global state to realize()
Registration of global state belongs into realize so move it there.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02 10:06:42 +02:00
Andreas Färber
213f0c4f61 qom: Pass available size to object_initialize()
To be passed on to object_initialize_with_type().

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (virtio-ccw)
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 21:15:44 +02:00
Alex Bligh
bc72ad6754 aio / timers: Switch entire codebase to the new timer API
This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Andreas Färber
f54d31575d ioapic: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:07:02 +02:00
Andreas Färber
cc3e064ee9 xilinx_intc: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:58 +02:00
Andreas Färber
7abad863d7 slavio_intctl: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:58 +02:00
Andreas Färber
b09a6f7b30 realview_gic: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:58 +02:00
Andreas Färber
1ecdf4022a puv3_intc: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:58 +02:00
Andreas Färber
7fc3266f76 pl190: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:58 +02:00
Andreas Färber
aefbc25695 pl190: Rename pl190_state to PL190State
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:58 +02:00
Andreas Färber
47edc5a479 omap_intc: QOM'ify omap-intc and omap2-intc
Create a new abstract base type and let omap-intc and omap2-intc inherit
from it. Introduce a type constant and use QOM casts.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:58 +02:00
Andreas Färber
1f8a9eac51 lm32_pic: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:57 +02:00
Andreas Färber
730bf9323d grlib_irqmp: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:57 +02:00
Andreas Färber
c5e22ae346 exynos4210_gic: QOM cast cleanup for exynos4210.irq_gate
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:57 +02:00
Andreas Färber
78c6abbd83 exynos4210_gic: QOM cast cleanup for exynos4210.gic
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:57 +02:00
Andreas Färber
c03c6b9cca exynos4210_combiner: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:57 +02:00