Commit Graph

674 Commits

Author SHA1 Message Date
Denis Plotnikov
1bf8a989a5 virtio: make seg_max virtqueue size dependent
Before the patch, seg_max parameter was immutable and hardcoded
to 126 (128 - 2) without respect to queue size. This has two negative effects:

1. when queue size is < 128, we have Virtio 1.1 specfication violation:
   (2.6.5.3.1 Driver Requirements) seq_max must be <= queue_size.
   This violation affects the old Linux guests (ver < 4.14). These guests
   crash on these queue_size setups.

2. when queue_size > 128, as was pointed out by Denis Lunev <den@virtuozzo.com>,
   seg_max restrics guest's block request length which affects guests'
   performance making them issues more block request than needed.
   https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03721.html

To mitigate this two effects, the patch adds the property adjusting seg_max
to queue size automaticaly. Since seg_max is a guest visible parameter,
the property is machine type managable and allows to choose between
old (seg_max = 126 always) and new (seg_max = queue_size - 2) behaviors.

Not to change the behavior of the older VMs, prevent setting the default
seg_max_adjust value for older machine types.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191220140905.1718-2-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-06 12:04:43 -05:00
Raphael Norwitz
f047243938 vhost-user-scsi: reset the device if supported
If the vhost-user-scsi backend supports the VHOST_USER_F_RESET_DEVICE
protocol feature, then the device can be reset when requested.

If this feature is not supported, do not try a reset as this will send
a VHOST_USER_RESET_OWNER that the backend is not expecting,
potentially putting into an inoperable state.

Signed-off-by: David Vrabel <david.vrabel@nutanix.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1572385083-5254-3-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05 07:03:03 -05:00
Stefan Hajnoczi
d0435bc513 virtio: don't enable notifications during polling
Virtqueue notifications are not necessary during polling, so we disable
them.  This allows the guest driver to avoid MMIO vmexits.
Unfortunately the virtio-blk and virtio-scsi handler functions re-enable
notifications, defeating this optimization.

Fix virtio-blk and virtio-scsi emulation so they leave notifications
disabled.  The key thing to remember for correctness is that polling
always checks one last time after ending its loop, therefore it's safe
to lose the race when re-enabling notifications at the end of polling.

There is a measurable performance improvement of 5-10% with the null-co
block driver.  Real-life storage configurations will see a smaller
improvement because the MMIO vmexit overhead contributes less to
latency.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191209210957.65087-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05 07:03:03 -05:00
Paolo Bonzini
0d074bf8e7 scsi: deprecate scsi-disk
It's an old compatibility shim that just delegates to scsi-cd or scsi-hd.
Just like ide-drive, we don't need this.

Acked-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-19 10:01:34 +01:00
Sam Eiderman
71f571a23d bootdevice: Gather LCHS from all relevant devices
Relevant devices are:
    * ide-hd (and ide-cd, ide-drive)
    * scsi-hd (and scsi-cd, scsi-disk, scsi-block)
    * virtio-blk-pci

We do not call del_boot_device_lchs() for ide-* since we don't need to -
IDE block devices do not support unplugging.

Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
2019-10-31 11:47:29 -04:00
Sam Eiderman
6b98c5aae6 scsi: Propagate unrealize() callback to scsi-hd
We will need to add LCHS removal logic to scsi-hd's unrealize() in the
next commit.

Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
2019-10-31 11:47:25 -04:00
Peter Maydell
f724de8dde Add Macintosh Quadra 800 machine in hw/m68k
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl23MAESHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748UPQQAIfzpB0KRb7InPFNUgGvShoCwKXQmbZm
 wkYoPdDnzgy3FBdbkFM0YcvvSH7Cnbq1njwaTOp8li+NBBiyZCqbCMBKLOusKqhR
 tlP/vF/Jj+o7pbggS+ruSYTtT0+4Q8T5AKEmWmm6ga+PhpT8kFCL+jC8j5bUTmDX
 0lTGwzANDNjGllP+aS6qhY1j9PEWcUpOWr42hW9ZXhAStsPOSzaV7SAZ2XZKPVJz
 KSdnsCPHJVzF4Ps6QK9iMw8szVGat/fq8UU/9w1o2HkmkTRNRW6vuagxmAG1iheW
 fPSpxNnXtoZqTY/qSP9/mMv8cntOtV5YjA/fAeSBa24vY/JFE/zstOrWUY0yhV2y
 CdllFzd/4duR5EThIatJZ4CE3ye89O4or73706l6fnpCI6+UADbneI+0I6VV0fyJ
 I+BxokoI4IgheYOkxD/oxGVx14Ax5vI+R4DkJ09m2koL9h/mALXKeKjb277sJJA/
 GrRx9ttdCGYp7beD84u38aSvNZ9Cs3foljBIYKH6/GqUY5Hl1FlFPE5cDRa+p/yR
 UA/ZDZ4FnJkyhg6Y5mrE8Fx7dvax+9QapKhPqeC9uEuLvUz8yPquMcICx8ehRnNx
 bl0IISTDZvIJwb8ZzemvWHPz63GfQzD1nJjxLZ8c4Q4XYtktETr45tYJd61vuV8x
 gzf/MzaBXSkX
 =HLjK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier/tags/q800-branch-pull-request' into staging

Add Macintosh Quadra 800 machine in hw/m68k

# gpg: Signature made Mon 28 Oct 2019 18:14:25 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/q800-branch-pull-request:
  BootLinuxConsoleTest: Test the Quadra 800
  hw/m68k: define Macintosh Quadra 800
  hw/m68k: add a dummy SWIM floppy controller
  hw/m68k: add Nubus macfb video card
  hw/m68k: add Nubus support
  hw/m68k: implement ADB bus support for via
  hw/m68k: add VIA support
  dp8393x: manage big endian bus
  esp: add pseudo-DMA as used by Macintosh
  esp: move get_cmd() post-DMA code to get_cmd_cb()
  esp: move handle_ti_cmd() cleanup code to esp_do_dma().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29 16:27:48 +00:00
Laurent Vivier
74d71ea16b esp: add pseudo-DMA as used by Macintosh
There is no DMA in Quadra 800, so the CPU reads/writes the data from the
PDMA register (offset 0x100, ESP_PDMA in hw/m68k/q800.c) and copies them
to/from the memory.

There is a nice assembly loop in the kernel to do that, see
linux/drivers/scsi/mac_esp.c:MAC_ESP_PDMA_LOOP().

The start of the transfer is triggered by the DREQ interrupt (see linux
mac_esp_send_pdma_cmd()), the CPU polls on the IRQ flag to start the
transfer after a SCSI command has been sent (in Quadra 800 it goes
through the VIA2, the via2-irq line and the vIFR register)

The Macintosh hardware includes hardware handshaking to prevent the CPU
from reading invalid data or writing data faster than the peripheral
device can accept it.

This is the "blind mode", and from the doc:
"Approximate maximum SCSI transfer rates within a blocks are 1.4 MB per
second for blind transfers in the Macintosh II"

Some references can be found in:
  Apple Macintosh Family Hardware Reference, ISBN 0-201-19255-1
  Guide to the Macintosh Family Hardware, ISBN-0-201-52405-8

Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20191026164546.30020-4-laurent@vivier.eu>
2019-10-28 19:03:45 +01:00
Laurent Vivier
6130b18850 esp: move get_cmd() post-DMA code to get_cmd_cb()
This will be needed to implement pseudo-DMA

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20191026164546.30020-3-laurent@vivier.eu>
2019-10-28 19:03:36 +01:00
Laurent Vivier
15407433e8 esp: move handle_ti_cmd() cleanup code to esp_do_dma().
To prepare following patches move do_cmd and DMA special case
from handle_ti() to esp_do_dma().

This part of the code must be only executed with real DMA, not with
pseudo-DMA. And PDMA is detected in esp_do_dma(), so move this part
of the code in esp_do_dma(). We keep the code in handle_ti_cmd()
in the case no DMA is done.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20191026164546.30020-2-laurent@vivier.eu>
2019-10-28 19:01:01 +01:00
Jason Wang
86044b24e8 virtio: basic packed virtqueue support
This patch implements basic support for the packed virtqueue. Compare
the split virtqueue which has three rings, packed virtqueue only have
one which is supposed to have better cache utilization and more
hardware friendly.

Please refer virtio specification for more information.

Signed-off-by: Wei Xu <wexu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20191025083527.30803-6-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-25 07:46:22 -04:00
Anton Nefedov
4989ef5781 scsi: account unmap operations
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-8-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-10 10:56:18 +02:00
Anton Nefedov
90ebf8431e scsi: move unmap error checking to the complete callback
This will help to account the operation in the following commit.

The difference is that we don't call scsi_disk_req_check_error() before
the 1st discard iteration anymore. That function also checks if
the request is cancelled, however it shouldn't get canceled until it
yields in blk_aio() functions anyway.
Same approach is already used for emulate_write_same.

Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190923121737.83281-7-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-10 10:56:18 +02:00
Anton Nefedov
6d0680823c scsi: store unmap offset and nb_sectors in request struct
it allows to report it in the error handler

Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-id: 20190923121737.83281-6-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-10 10:56:18 +02:00
Philippe Mathieu-Daudé
794dcb54b3 trace: Remove trailing newline in events
While the tracing framework does not forbid trailing newline in
events format string, using them lead to confuse output.
It is the responsibility of the backend to properly end an event
line.

Some of our formats have trailing newlines, remove them.

[Fixed typo in commit description reported by Eric Blake
<eblake@redhat.com>
--Stefan]

Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-2-philmd@redhat.com
Message-Id: <20190916095121.29506-2-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-09-18 10:19:47 +01:00
Raphael Norwitz
5d4c1ed3d4 vhost-user-scsi: prevent using uninitialized vqs
Of the 3 virtqueues, seabios only sets cmd, leaving ctrl
and event without a physical address. This can cause
vhost_verify_ring_part_mapping to return ENOMEM, causing
the following logs:

qemu-system-x86_64: Unable to map available ring for ring 0
qemu-system-x86_64: Verify ring failure on region 0

The qemu commit e6cc11d64f
has already resolved the issue for vhost scsi devices but
the fix was never applied to vhost-user scsi devices.

Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1560299717-177734-1-git-send-email-raphael.norwitz@nutanix.com
Message-Id: <1560299717-177734-1-git-send-email-raphael.norwitz@nutanix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-08-22 16:52:23 +01:00
Paolo Bonzini
de594e4765 scsi: lsi: exit infinite loop while executing script (CVE-2019-12068)
When executing script in lsi_execute_script(), the LSI scsi adapter
emulator advances 's->dsp' index to read next opcode. This can lead
to an infinite loop if the next opcode is empty. Move the existing
loop exit after 10k iterations so that it covers no-op opcodes as
well.

Reported-by: Bugs SysSec <bugs-syssec@rub.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-20 20:00:52 +02:00
Markus Armbruster
54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster
2f780b6a91 sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).

Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry.  Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there.  Drop the now
superfluous includes of sysemu/sysemu.h from headers.

Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
d5938f29fe Clean up inclusion of sysemu/sysemu.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Almost a third of its inclusions are actually superfluous.  Delete
them.  Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.

hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it.  The compiler is cool with that, but include it anyway.

This doesn't reduce actual use much, as it's still included into
widely included headers.  The next commit will tackle that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16 13:31:53 +02:00
Markus Armbruster
a27bd6c779 Include hw/qdev-properties.h less
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h.  Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
db72581598 Include qemu/main-loop.h less
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).  It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.

Include qemu/main-loop.h only where it's needed.  Touching it now
recompiles only some 1700 objects.  For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800.  For the
others, they shrink only slightly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
dc5e9ac716 Include qemu/queue.h slightly less
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-20-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
d645427057 Include migration/vmstate.h less
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get VMStateDescription.  The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed.  Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
64552b6be4 Include hw/irq.h a lot less
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.

Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed.  Touching it now recompiles only some 500 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
ca77ee28e0 Include migration/qemu-file-types.h a lot less
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).

The culprit is again hw/hw.h, which supposedly includes it for
convenience.

Include migration/qemu-file-types.h only where it's needed.  Touching
it now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Kevin Wolf
7cef3d1290 scsi-cd: Fix inserting read-only media in empty drive
scsi-disks decides whether it has a read-only device by looking at
whether the BlockBackend specified as drive=... is read-only. In the
case of an anonymous BlockBackend (with a node name specified in
drive=...), this is the read-only flag of the attached node. In the case
of an empty anonymous BlockBackend, it's always read-write because
nothing prevented it from being read-write.

This is a problem because scsi-cd would take write permissions on the
anonymous BlockBackend of an empty drive created without a drive=...
option. Using blockdev-insert-medium with a read-only node fails then
with the error message "Block node is read-only".

Fix scsi_realize() so that scsi-cd devices always take read-only
permissions on their BlockBackend instead.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1733920
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2019-07-30 13:21:38 +02:00
Zhengui li
9c5aad84da virtio-scsi: fixed virtio_scsi_ctx_check failed when detaching scsi disk
commit a6f230c move blockbackend back to main AioContext on unplug. It set the AioContext of
SCSIDevice to the main AioContex, but s->ctx is still the iothread AioContex(if the scsi controller
is configure with iothread). So if there are having in-flight requests during unplug, a failing assertion
happend. The bt is below:
(gdb) bt
#0  0x0000ffff86aacbd0 in raise () from /lib64/libc.so.6
#1  0x0000ffff86aadf7c in abort () from /lib64/libc.so.6
#2  0x0000ffff86aa6124 in __assert_fail_base () from /lib64/libc.so.6
#3  0x0000ffff86aa61a4 in __assert_fail () from /lib64/libc.so.6
#4  0x0000000000529118 in virtio_scsi_ctx_check (d=<optimized out>, s=<optimized out>, s=<optimized out>) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:246
#5  0x0000000000529ec4 in virtio_scsi_handle_cmd_req_prepare (s=0x2779ec00, req=0xffff740397d0) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:559
#6  0x000000000052a228 in virtio_scsi_handle_cmd_vq (s=0x2779ec00, vq=0xffff7c6d7110) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:603
#7  0x000000000052afa8 in virtio_scsi_data_plane_handle_cmd (vdev=<optimized out>, vq=0xffff7c6d7110) at /home/qemu-4.0.0/hw/scsi/virtio-scsi-dataplane.c:59
#8  0x000000000054d94c in virtio_queue_host_notifier_aio_poll (opaque=<optimized out>) at /home/qemu-4.0.0/hw/virtio/virtio.c:2452

assert(blk_get_aio_context(d->conf.blk) == s->ctx) failed.

To avoid assertion failed,  moving the "if" after qdev_simple_device_unplug_cb.

In addition, to avoid another qemu crash below, add aio_disable_external before
qdev_simple_device_unplug_cb, which disable the further processing of external clients
when doing qdev_simple_device_unplug_cb.
(gdb) bt
#0  scsi_req_unref (req=0xffff6802c6f0) at hw/scsi/scsi-bus.c:1283
#1  0x00000000005294a4 in virtio_scsi_handle_cmd_req_submit (req=<optimized out>,
    s=<optimized out>) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:589
#2  0x000000000052a2a8 in virtio_scsi_handle_cmd_vq (s=s@entry=0x9c90e90,
    vq=vq@entry=0xffff7c05f110) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:625
#3  0x000000000052afd8 in virtio_scsi_data_plane_handle_cmd (vdev=<optimized out>,
    vq=0xffff7c05f110) at /home/qemu-4.0.0/hw/scsi/virtio-scsi-dataplane.c:60
#4  0x000000000054d97c in virtio_queue_host_notifier_aio_poll (opaque=<optimized out>)
    at /home/qemu-4.0.0/hw/virtio/virtio.c:2447
#5  0x00000000009b204c in run_poll_handlers_once (ctx=ctx@entry=0x6efea40,
    timeout=timeout@entry=0xffff7d7f7308) at util/aio-posix.c:521
#6  0x00000000009b2b64 in run_poll_handlers (ctx=ctx@entry=0x6efea40,
    max_ns=max_ns@entry=4000, timeout=timeout@entry=0xffff7d7f7308) at util/aio-posix.c:559
#7  0x00000000009b2ca0 in try_poll_mode (ctx=ctx@entry=0x6efea40, timeout=0xffff7d7f7308,
    timeout@entry=0xffff7d7f7348) at util/aio-posix.c:594
#8  0x00000000009b31b8 in aio_poll (ctx=0x6efea40, blocking=blocking@entry=true)
    at util/aio-posix.c:636
#9  0x00000000006973cc in iothread_run (opaque=0x6ebd800) at iothread.c:75
#10 0x00000000009b592c in qemu_thread_start (args=0x6efef60) at util/qemu-thread-posix.c:502
#11 0x0000ffff8057f8bc in start_thread () from /lib64/libpthread.so.0
#12 0x0000ffff804e5f8c in thread_start () from /lib64/libc.so.6
(gdb) p bus
$1 = (SCSIBus *) 0x0

Signed-off-by: Zhengui li <lizhengui@huawei.com>
Message-Id: <1563696502-7972-1-git-send-email-lizhengui@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1563829520-17525-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-24 11:21:53 +02:00
Shin'ichiro Kawasaki
1849f297f5 scsi-generic: Check sense key before request snooping and patching
When READ CAPACITY command completes, scsi_read_complete() function
snoops the command result and updates SCSIDevice members blocksize and
max_lba . However, this update is executed even when READ CAPACITY
command indicates an error in sense data. This causes unexpected
blocksize update with zero value for SCSI devices without
READ CAPACITY(10) command support and eventually results in a divide
by zero. An emulated device by TCMU-runner is an example of a device
that doesn't support READ CAPACITY(10) command.

To avoid the unexpected update, add sense key check in
scsi_read_complete() function. The function already checks the sense key
for VPD Block Limits emulation. Do the scsi_parse_sense_buf() call for
all requests rather than just for VPD Block Limits emulation, so that
blocksize and max_lba are only updated if READ CAPACITY returns zero
sense key.

Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
[Extend the check to all requests, not just READ CAPACITY]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-19 19:04:49 +02:00
Xie Yongji
68fa7ca015 vhost-user-scsi: Call virtio_scsi_common_unrealize() when device realize failed
This avoids memory leak when device hotplug is failed.

Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190717004606.12444-2-xieyongji@baidu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-19 19:04:49 +02:00
Xie Yongji
934443c37b vhost-scsi: Call virtio_scsi_common_unrealize() when device realize failed
This avoids memory leak when device hotplug is failed.

Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190717004606.12444-1-xieyongji@baidu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-19 19:04:49 +02:00
Paolo Bonzini
12e1dc4939 virtio-scsi: remove unused argument to virtio_scsi_common_realize
The argument is not used and passing it clutters error propagation in the
callers.  So, get rid of it.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-19 19:04:38 +02:00
Paolo Bonzini
bdf9613b7f scsi: explicitly list guest-recoverable sense codes
It's not really possible to fit all sense codes into errno codes,
especially in such a way that sense codes can be properly categorized as
either guest-recoverable or host-handled.  Create a new function that
checks for guest recoverable sense, then scsi_sense_buf_to_errno only
needs to be called for host handled sense codes.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15 11:20:42 +02:00
Shinichiro Kawasaki
d31347f5ff scsi-disk: pass sense correctly for guest-recoverable errors
When an error was passed down to the guest because it was recoverable,
the sense length was not copied from the SG_IO data.  As a result,
the guest saw the CHECK CONDITION status but not the sense data.

Signed-off-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15 11:20:42 +02:00
Stefan Hajnoczi
1a8c091c4e virtio-scsi: restart DMA after iothread
When the 'cont' command resumes guest execution the vm change state
handlers are invoked.  Unfortunately there is no explicit ordering
between classic qemu_add_vm_change_state_handler() callbacks.  When two
layers of code both use vm change state handlers, we don't control which
handler runs first.

virtio-scsi with iothreads hits a deadlock when a failed SCSI command is
restarted and completes before the iothread is re-initialized.

This patch uses the new qdev_add_vm_change_state_handler() API to
guarantee that virtio-scsi's virtio change state handler executes before
the SCSI bus children.  This way DMA is restarted after the iothread has
re-initialized.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-08 16:00:26 +02:00
Markus Armbruster
a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Markus Armbruster
0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Markus Armbruster
856dfd8a03 qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-11 20:22:09 +02:00
Peter Maydell
0d74f3b427 Trivial fixes 06/06/2019
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAlz4844SHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748FtwQALCoNnMrEY4mnmHy0dnEQPRFcPMKa9pp
 3lqpmxLHAkSsWFKmmLKPteZhUroBmzXPa91984hhQiglcMMMsIPy+A+x1QBj7Yt2
 KeEKpIdSS6Qi4T72zVOtO4MR1pCeKUYHY8ICn/rqAkpkA/lt5DuX2xJSepgrSdAI
 /JgpawJ4Rz95x5rCLuy/t5egtKVYVhauv4EbQ9PeaFhSlwoKNYbc6qAZSvs8pr9n
 H4W8DgtI35wPj4zE3i9bbmnUUxCUMj6MjkIm/jTB5qewY/I+llb27CN2Uq1yvRKW
 ANGbGW3rVwQe8p6kbVcM7CDbawm4J0c59w/4mUTa3BRRuAj4KtHTeghXALHLn/gv
 aO90oZKGd2xGxpSMAapzgebNezUQxFFoRWhyI4o8N+SWEpoRbHkxDwrk2WlKXsCR
 xRYOensU17NOKMJ32AbUReC2/m7D71EH3723aVzd2O5nuIHlsEG2CYjlzjXFB4X8
 wPbaigcqpDEMwLTt3kYy4TrghFdcSaAYepmqXJ9D9UONMOrnRhhR9GkvEmCB4Eus
 BJanLE0xp59KTVDZ5c/v6+44P/RQ04aD2oFh0bMKlNb4+cfbQlq2odoiCPcUKimh
 XCCbYbwJFRRkgGTh9pFMgMqH9zX8HTgG/2Zp2VGFnYXnJzz/AuvgH9k5Pc4P3C/A
 lOCSBWpxR6bk
 =wmCY
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging

Trivial fixes 06/06/2019

# gpg: Signature made Thu 06 Jun 2019 12:05:50 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  hw/watchdog/wdt_i6300esb: Use DEVICE() macro to access DeviceState.qdev
  hw/scsi: Use the QOM BUS() macro to access BusState.qbus
  hw/sd: Use the QOM BUS() macro to access BusState.qbus
  hw/audio/ac97: Use the QOM DEVICE() macro to access DeviceState.qdev
  hw/vfio/pci: Use the QOM DEVICE() macro to access DeviceState.qdev
  hw/usb-storage: Use the QOM DEVICE() macro to access DeviceState.qdev
  hw/isa: Use the QOM DEVICE() macro to access DeviceState.qdev
  hw/s390x/event-facility: Use the QOM BUS() macro to access BusState.qbus
  hw/pci-bridge: Use the QOM BUS() macro to access BusState.qbus
  hw/scsi/vmw_pvscsi: Use qbus_reset_all() directly
  docs/devel/build-system: Update an example
  test: Fix make target check-report.tap
  util: Adjust qemu_guest_getrandom_nofail for Coverity
  vhost: fix incorrect print type
  migration: fix a typo
  hw/rdma: Delete unused headers inclusion

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-06 14:09:14 +01:00
Peter Maydell
347a6f44e9 virtio, pci, pc: cleanups, features
stricter rules for acpi tables: we now fail
 on any difference that isn't whitelisted.
 
 vhost-scsi migration.
 
 some cleanups all over the place
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJc+B4YAAoJECgfDbjSjVRpq1EIAJR7tCxcpu9GggVlinmUA8G4
 tmSAe06IryH7+nF3RsnINuGu7ius9qC2/E2y0uJUHhTqiU/RWOfWZ7PPM0EcYZaA
 TLPaCe2NUF6/8afeqmvE9Usk7VspI5TDZRms+bonmZz2xP1lHIMN0qW4s7HHLWr8
 sZKDtCJ+9cYII93VQwtlR0qiHgv5f0kzcuZeJaZHsAHH6XZGqRuQjI6txcFa4o53
 lkdLCEwTnRuwu2wyL84eL5p+E8SzOgR/x1QI+nffrJfsvnmiT7lnOrkjnQlWAp5G
 xqwqsUrUxUCuQ+zitwJqmv+H6nx79MwAM7fTHAETCWX703N5o9tZxAnHHqLoa8I=
 =cQNg
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pci, pc: cleanups, features

stricter rules for acpi tables: we now fail
on any difference that isn't whitelisted.

vhost-scsi migration.

some cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 05 Jun 2019 20:55:04 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  bios-tables-test: ignore identical binaries
  tests: acpi: add simple arm/virt testcase
  tests: add expected ACPI tables for arm/virt board
  bios-tables-test: list all tables that differ
  vhost-scsi: Allow user to enable migration
  vhost-scsi: Add VMState descriptor
  vhost-scsi: The vhost backend should be stopped when the VM is not running
  bios-tables-test: add diff allowed list
  vhost: fix memory leak in vhost_user_scsi_realize
  vhost: fix incorrect print type
  vhost: remove the dead code
  docs: smbios: remove family=x from type2 entry description
  pci: Fold pci_get_bus_devfn() into its sole caller
  pci: Make is_bridge a bool
  pcie: Simplify pci_adjust_config_limit()
  acpi: pci: use build_append_foo() API to construct MCFG
  hw/acpi: Consolidate build_mcfg to pci.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-06 12:52:31 +01:00
Philippe Mathieu-Daudé
824755baf8 hw/scsi: Use the QOM BUS() macro to access BusState.qbus
Rather than looking inside the definition of a BusState with "s->bus.qbus",
use the QOM prefered style: "BUS(&s->bus)".

This patch was generated using the following Coccinelle script:

    // Use BUS() macros to access BusState.qbus
    @use_bus_macro_to_access_qbus@
    expression obj;
    identifier bus;
    @@
    -&obj->bus.qbus
    +BUS(&obj->bus)

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190528164020.32250-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06 11:54:07 +02:00
Philippe Mathieu-Daudé
573c3e077b hw/scsi/vmw_pvscsi: Use qbus_reset_all() directly
Since the BusState is accesible from the SCSIBus object,
it is pointless to use qbus_reset_all_fn.
Use qbus_reset_all() directly.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Message-Id: <20190528164020.32250-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-06 11:28:29 +02:00
Kevin Wolf
4f71fb436a scsi-disk: Use qdev_prop_drive_iothread
This makes use of qdev_prop_drive_iothread for scsi-disk so that the
disk can be attached to a node that is already in the target AioContext.
We need to check that the HBA actually supports iothreads, otherwise
scsi-disk must make sure that the node is already in the main
AioContext.

This changes the error message for conflicting iothread settings.
Previously, virtio-scsi produced the error message, now it comes from
blk_set_aio_context(). Update a test case accordingly.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:22 +02:00
Kevin Wolf
d861ab3acf block: Add BlockBackend.ctx
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).

The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:22 +02:00
Kevin Wolf
97896a4887 block: Add Error to blk_set_aio_context()
Add an Error parameter to blk_set_aio_context() and use
bdrv_child_try_set_aio_context() internally to check whether all
involved nodes can actually support the AioContext switch.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:22 +02:00
Liran Alon
b3e89c941a vhost-scsi: Allow user to enable migration
In order to perform a valid migration of a vhost-scsi device,
the following requirements must be met:
(1) The virtio-scsi device state needs to be saved & loaded.
(2) The vhost backend must be stopped before virtio-scsi device state
is saved:
  (2.1) Sync vhost backend state to virtio-scsi device state.
  (2.2) No further I/O requests are made by vhost backend to target
        SCSI device.
  (2.3) No further guest memory access takes place after VM is stopped.
(3) Requests in-flight to target SCSI device are completed before
    migration handover.
(4) Target SCSI device state needs to be saved & loaded into the
    destination host target SCSI device.

Previous commit ("vhost-scsi: Add VMState descriptor")
add support to save & load the device state using VMState.
This meets requirement (1).

When VM is stopped by migration thread (On Pre-Copy complete), the
following code path is executed:
migration_completion() -> vm_stop_force_state() -> vm_stop() ->
do_vm_stop().

do_vm_stop() calls first pause_all_vcpus() which pause all guest
vCPUs and then call vm_state_notify().
In case of vhost-scsi device, this will lead to the following code path
to be executed:
vm_state_notify() -> virtio_vmstate_change() ->
virtio_set_status() -> vhost_scsi_set_status() -> vhost_scsi_stop().
vhost_scsi_stop() then calls vhost_scsi_clear_endpoint() and
vhost_scsi_common_stop().

vhost_scsi_clear_endpoint() sends VHOST_SCSI_CLEAR_ENDPOINT ioctl to
vhost backend which will reach kernel's vhost_scsi_clear_endpoint()
which process all pending I/O requests and wait for them to complete
(vhost_scsi_flush()). This meets requirement (3).

vhost_scsi_common_stop() will stop the vhost backend.
As part of this stop, dirty-bitmap is synced and vhost backend state is
synced with virtio-scsi device state. As at this point guest vCPUs are
already paused, this meets requirement (2).

At this point we are left with requirement (4) which is target SCSI
device specific and therefore cannot be done by QEMU. Which is the main
reason why vhost-scsi adds a migration blocker.
However, as this can be handled either by an external orchestrator or
by using shared-storage (i.e. iSCSI), there is no reason to limit the
orchestrator from being able to explictly specify it wish to enable
migration even when VM have a vhost-scsi device.

Considering all the above, this commit allows orchestrator to explictly
specify that it is responsbile for taking care of requirement (4) and
therefore vhost-scsi should not add a migration blocker.

Reviewed-by: Nir Weiner <nir.weiner@oracle.com>
Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190416125912.44001-4-liran.alon@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-06-02 21:32:06 -04:00
Nir Weiner
4ea5742558 vhost-scsi: Add VMState descriptor
As preparation of enabling migration of vhost-scsi device,
define it’s VMState. Note, we keep the convention of
verifying in the pre_save() method that the vhost backend
must be stopped before attempting to save the device
state. Similar to how it is done for vhost-vsock.

Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Message-Id: <20190416125912.44001-3-liran.alon@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-06-02 21:32:06 -04:00
Nir Weiner
c6d369fd78 vhost-scsi: The vhost backend should be stopped when the VM is not running
vhost-scsi doesn’t takes into account whether the VM is running or not in
order to decide if it should start/stop vhost backend.
This would lead to vhost backend still being active when VM's RunState
suddenly change to stopped.

An example of when this issue is encountered is when Live-Migration Pre-Copy
phase completes. As in this case, VM state will be changed to stopped (while
vhost backend is still active), which will result in
virtio_vmstate_change() -> virtio_set_status() -> vhost_scsi_set_status()
executed but vhost_scsi_set_status() will just return without stopping
vhost backend.

To handle this, change code to consider that vhost processing should be
stopped when VM is not running. Similar to how it is done in vhost-vsock
device at vhost_vsock_set_status().

Fixes: 5e9be92d77 ("vhost-scsi: new device supporting the tcm_vhost Linux kernel module”)
Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Message-Id: <20190416125912.44001-2-liran.alon@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-06-02 21:32:06 -04:00
Jie Wang
386cff49eb vhost: fix memory leak in vhost_user_scsi_realize
fix memory leak in vhost_user_scsi_realize

Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556608500-12183-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-05-29 18:00:57 -04:00