All qdev_prop_register_global() set &error_fatal for errp, except
'-rtc driftfix=slew', which arguably should also use &error_fatal, as
otherwise failing to apply the property would only report a warning.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
The STIBP flag may be supported by the host KVM module, so QEMU
can allow it to be configured manually, and it can be exposed to
guests when using "-cpu host".
No additional migration code is required because the whole
contents of spec_ctrl is already migrated in the "cpu/spec_ctrl"
section.
Corresponding KVM patch was submitted at:
https://lore.kernel.org/lkml/20181205191956.31480-1-ehabkost@redhat.com/
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181210180250.31299-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
MOVDIR64B moves 64-bytes as direct-store with 64-bytes write atomicity.
Direct store is implemented by using write combining (WC) for writing
data directly into memory without caching the data.
The bit definition:
CPUID.(EAX=7,ECX=0):ECX[bit 28] MOVDIR64B
The release document ref below link:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
Cc: Xu Tao <tao3.xu@intel.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Message-Id: <1541488407-17045-3-git-send-email-jingqi.liu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
MOVDIRI moves doubleword or quadword from register to memory through
direct store which is implemented by using write combining (WC) for
writing data directly into memory without caching the data.
The bit definition:
CPUID.(EAX=7,ECX=0):ECX[bit 27] MOVDIRI
The release document ref below link:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
Cc: Xu Tao <tao3.xu@intel.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Message-Id: <1541488407-17045-2-git-send-email-jingqi.liu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Adds a new CPU flag to enable the Enlightened VMCS KVM feature.
QEMU enables KVM_CAP_HYPERV_ENLIGHTENED_VMCS and gets back the
version to be advertised in lower 16 bits of CPUID.0x4000000A:EAX.
Suggested-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20181022165506.30332-3-vkuznets@redhat.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As the release document ref below link (page 13):
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
PKU is supported in Skylake Server (Only Server) and later, and
on Intel(R) Xeon(R) Processor Scalable Family. So PKU is supposed
to be in Skylake-Server CPU model. And PKU's CPUID has been
exposed to QEMU. But PKU can't be find in Skylake-Server CPU
model in the code. So this patch will fix this issue in
Skylake-Server CPU model.
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <5014b57f834dcfa8fd3781504d98dcf063d54fde.1540801392.git.tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
New CPU models mostly inherit features from ancestor Skylake-Server,
while addin new features: AVX512_VNNI, Intel PT.
SSBD support for speculative execution
side channel mitigations.
Note:
On Cascadelake, some capabilities (RDCL_NO, IBRS_ALL, RSBA,
SKIP_L1DFL_VMENTRY and SSB_NO) are enumerated by MSR.
These features rely on MSR based feature support patch.
Will be added later after that patch's in.
http://lists.nongnu.org/archive/html/qemu-devel/2018-09/msg00074.html
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20180919031122.28487-2-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Note RSBA is specially treated -- no matter host support it or not, qemu
pretends it is supported.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1539578845-37944-4-git-send-email-robert.hu@linux.intel.com>
[ehabkost: removed automatic enabling of RSBA]
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Intel SDM says for CPUID function 0DH, sub-function 0:
| • ECX enumerates the size (in bytes) required by the XSAVE instruction for an
| XSAVE area containing all the user state components supported by this
| processor.
| • EBX enumerates the size (in bytes) required by the XSAVE instruction for an
| XSAVE area containing all the user state components corresponding to bits
| currently set in XCR0.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Message-Id: <20180928104319.3296-1-bigeasy@linutronix.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kPZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Calling error_report() in a function that takes an Error ** argument
is suspicious. Convert a few that are actually warnings to
warn_report().
While there, split a warning consisting of multiple sentences to
conform to conventions spelled out in warn_report()'s contract.
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Wei Huang <wei@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20181017082702.5581-5-armbru@redhat.com>
Certain configurations do not allow SynIC to be used in QEMU. In
particular,
- when hyperv_vpindex is off, SINT routes can't be used as they refer to
the destination vCPU by vp_index
- older KVM (which doesn't expose KVM_CAP_HYPERV_SYNIC2) zeroes out
SynIC message and event pages on every msr load, breaking migration
OTOH in-KVM users of SynIC -- SynIC timers -- do work in those
configurations, and we shouldn't stop the guest from using them.
To cover both scenarios, introduce an X86CPU property that makes CPU
init code to skip creation of the SynIC object (and thus disables any
SynIC use in QEMU) but keeps the KVM part of the SynIC working.
The property is clear by default but is set via compat logic for older
machine types.
As a result, when hv_synic and a modern machine type are specified, QEMU
will refuse to run unless vp_index is on and the kernel is recent
enough. OTOH with an older machine type QEMU will run fine with
hv_synic=on against an older kernel and/or without vp_index enabled but
will disallow the in-QEMU uses of SynIC (in e.g. VMBus).
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-4-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V PV IPI support is merged to KVM, enable the feature in Qemu. When
enabled, this allows Windows guests to send IPIs to other vCPUs with a
single hypercall even when there are >64 vCPUs in the request.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20181009130853.6412-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Interrupt handling depends on various flags in env->hflags or env->hflags2,
and the exact detail were not exactly replicated between x86_cpu_has_work
and x86_cpu_exec_interrupt. Create a new function that extracts the
highest-priority non-masked interrupt, and use it in both functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported by Coverity:
Error: RESOURCE_LEAK (CWE-772): [#def439]
qemu-2.12.0/target/i386/cpu.c:3179: alloc_fn: Storage is returned from allocation function "qdict_new".
qemu-2.12.0/qobject/qdict.c:34:5: alloc_fn: Storage is returned from allocation function "g_malloc0".
qemu-2.12.0/qobject/qdict.c:34:5: var_assign: Assigning: "qdict" = "g_malloc0(4120UL)".
qemu-2.12.0/qobject/qdict.c:37:5: return_alloc: Returning allocated memory "qdict".
qemu-2.12.0/target/i386/cpu.c:3179: var_assign: Assigning: "props" = storage returned from "qdict_new()".
qemu-2.12.0/target/i386/cpu.c:3217: leaked_storage: Variable "props" going out of scope leaks the storage it points to.
This was introduced by commit b8097deb35 ("i386: Improve
query-cpu-model-expansion full mode").
The leak is only theoretical: if ret->model->props is set to
props, the qapi_free_CpuModelExpansionInfo() call will free props
too in case of errors. The only way for this to not happen is if
we enter the default branch of the switch statement, which would
never happen because all CpuModelExpansionType values are being
handled.
It's still worth to change this to make the allocation logic
easier to follow and make the Coverity error go away. To make
everything simpler, initialize ret->model and ret->model->props
earlier in the function.
While at it, remove redundant check for !prop because prop is
always initialized at the beginning of the function.
Fixes: b8097deb35
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180816183509.8231-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enabling TOPOEXT is always allowed, but it can't be enabled
blindly by "-cpu host" because it may make guests crash if the
rest of the cache topology information isn't provided or isn't
consistent.
This addresses the bug reported at:
https://bugzilla.redhat.com/show_bug.cgi?id=1613277
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180809221852.15285-1-ehabkost@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
New CPU models mostly inherit features from ancestor Skylake, while addin new
features: UMIP, New Instructions ( PCONIFIG (server only), WBNOINVD,
AVX512_VBMI2, GFNI, AVX512_VNNI, VPCLMULQDQ, VAES, AVX512_BITALG),
Intel PT and 5-level paging (Server only). As well as
IA32_PRED_CMD, SSBD support for speculative execution
side channel mitigations.
Note:
For 5-level paging, Guest physical address width can be configured, with
parameter "phys-bits". Unless explicitly specified, we still use its default
value, even for Icelake-Server cpu model.
At present, hold on expose IA32_ARCH_CAPABILITIES to guest, as 1) This MSR
actually presents more than 1 'feature', maintainers are considering expanding current
features presentation of only CPUIDs to MSR bits; 2) a reasonable default value
for MSR_IA32_ARCH_CAPABILITIES needs to settled first. These 2 are actully
beyond Icelake CPU model itself but fundamental. So split these work apart
and do it later.
https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00774.htmlhttps://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00796.html
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1530781798-183214-6-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
WBNOINVD: Write back and do not invalidate cache, enumerated by
CPUID.(EAX=80000008H, ECX=0):EBX[bit 9].
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1530781798-183214-5-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Support of IA32_PRED_CMD MSR already be enumerated by same CPUID bit as
SPEC_CTRL.
At present, mark CPUID_7_0_EDX_ARCH_CAPABILITIES unmigratable, per Paolo's
comment.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1530781798-183214-3-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
MSR_SMI_COUNT started being migrated in QEMU 2.12. Do not migrate it
on older machine types, or the subsection causes a load failure for
guests that use SMM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename DCACHE to DATA_CACHE and ICACHE to INSTRUCTION_CACHE.
This avoids conflict with Linux asm/cachectl.h macros and fixes
build failure on mips hosts.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180717194010.30096-1-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Since commit d6dcc5583e, '-cpu ?' shows the description of the
X86_CPU_TYPE_NAME("max") for the host CPU model:
Enables all features supported by the accelerator in the current host
instead of the expected:
KVM processor with all supported host features
or
HVF processor with all supported host features
This is caused by the early use of kvm_enabled() and hvf_enabled() in
a class_init function. Since the accelerator isn't configured yet, both
helpers return false unconditionally.
A QEMU binary will only be compiled with one of these accelerators, not
both. The appropriate description can thus be decided at build time.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <153055056654.212317.4697363278304826913.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This implements NPT suport for SVM by hooking into
x86_cpu_handle_mmu_fault where it reads the stage-1 page table. Whether
we need to perform this 2nd stage translation, and how, is decided
during vmrun and stored in hflags2, along with nested_cr3 and
nested_pg_mode.
As get_hphys performs a direct cpu_vmexit in case of NPT faults, we need
retaddr in that function. To avoid changing the signature of
cpu_handle_mmu_fault, this passes the value from tlb_fill to get_hphys
via the CPU state.
This was tested successfully via the Jailhouse hypervisor.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <567473a0-6005-5843-4c73-951f476085ca@web.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for Hyper-V TLB flush which recently got added to KVM.
Just like regular Hyper-V we announce HV_EX_PROCESSOR_MASKS_RECOMMENDED
regardless of how many vCPUs we have. Windows is 'smart' and uses less
expensive non-EX Hypercall whenever possible (when it wants to flush TLB
for all vCPUs or the maximum vCPU index in the vCPU set requires flushing
is less than 64).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20180610184927.19309-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When guest CPU PM is enabled, and with -cpu host, expose the host CPU
MWAIT leaf in the CPUID so guest can make good PM decisions.
Note: the result is 100% CPU utilization reported by host as host
no longer knows that the CPU is halted.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180622192148.178309-3-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove generic non-intel check while validating hyperthreading support.
Certain AMD CPUs can support hyperthreading now.
CPU family with TOPOEXT feature can support hyperthreading now.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Tested-by: Geoffrey McRae <geoff@hostfission.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1529443919-67509-4-git-send-email-babu.moger@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Enable TOPOEXT feature on EPYC CPU. This is required to support
hyperthreading on VM guests. Also extend xlevel to 0x8000001E.
Disable topoext on PC_COMPAT_2_12 and keep xlevel 0x8000000a.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <1529443919-67509-3-git-send-email-babu.moger@amd.com>
[ehabkost: Added EPYC-IBPB.xlevel to PC_COMPAT_2_12]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This is part of topoext support. To keep the compatibility, it is better
we support all the combination of nr_cores and nr_threads currently
supported. By allowing more nr_cores and nr_threads, we might end up with
more nodes than we can actually support with the real hardware. We need to
fix up the node id to make this work. We can achieve this by shifting the
socket_id bits left to address more nodes.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <1529443919-67509-2-git-send-email-babu.moger@amd.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
AMD future CPUs expose a mechanism to tell the guest that the
Speculative Store Bypass Disable is not needed and that the
CPU is all good.
This is exposed via the CPUID 8000_0008.EBX[26] bit.
See 124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf
A copy of this document is available at
https://bugzilla.kernel.org/show_bug.cgi?id=199889
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Message-Id: <20180601153809.15259-3-konrad.wilk@oracle.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
AMD future CPUs expose _two_ ways to utilize the Intel equivalant
of the Speculative Store Bypass Disable. The first is via
the virtualized VIRT_SPEC CTRL MSR (0xC001_011f) and the second
is via the SPEC_CTRL MSR (0x48). The document titled:
124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf
gives priority of SPEC CTRL MSR over the VIRT SPEC CTRL MSR.
A copy of this document is available at
https://bugzilla.kernel.org/show_bug.cgi?id=199889
Anyhow, this means that on future AMD CPUs there will be _two_ ways to
deal with SSBD.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Message-Id: <20180601153809.15259-2-konrad.wilk@oracle.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
OSPKE is not a static feature flag: it changes dynamically at
runtime depending on CR4, and it was never configurable: KVM
never returned OSPKE on GET_SUPPORTED_CPUID, and on TCG enables
it automatically if CR4_PKE_MASK is set.
Remove OSPKE from the feature name array so users don't try to
configure it manually.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180611203712.12086-1-ehabkost@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
OSXAVE is not a static feature flag: it changes dynamically at
runtime depending on CR4, and it was never configurable: KVM
never returned OSXSAVE on GET_SUPPORTED_CPUID, and it is not
included in TCG_EXT_FEATURES.
Remove OSXSAVE from the feature name array so users don't try to
configure it manually.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180611203855.13269-1-ehabkost@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When using '-cpu help' the list of CPUID features is grouped according
to the internal low level CPUID grouping. The data printed results in
very long lines too.
This combines to make it hard for users to read the output and identify
if QEMU knows about the feature they wish to use.
This change gets rid of the grouping of features and treats all flags as
single list. The list is sorted into alphabetical order and the printing
with line wrapping at the 77th column.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180606165527.17365-4-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current list of CPU model names output by "-cpu help" is sorted
alphabetically based on the internal QOM class name. The text that is
displayed, however, uses the CPU model name, which is equivalent to the
QOM class name, minus a suffix. Unfortunately that suffix has an effect
on the sort ordering, for example, causing the various Broadwell
variants to appear reversed:
x86 486
x86 Broadwell-IBRS Intel Core Processor (Broadwell, IBRS)
x86 Broadwell-noTSX-IBRS Intel Core Processor (Broadwell, no TSX, IBRS
x86 Broadwell-noTSX Intel Core Processor (Broadwell, no TSX)
x86 Broadwell Intel Core Processor (Broadwell)
x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2)
By sorting on the actual CPU model name text that is displayed, the
result is
x86 486
x86 Broadwell Intel Core Processor (Broadwell)
x86 Broadwell-IBRS Intel Core Processor (Broadwell, IBRS)
x86 Broadwell-noTSX Intel Core Processor (Broadwell, no TSX)
x86 Broadwell-noTSX-IBRS Intel Core Processor (Broadwell, no TSX, IBRS)
x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2)
This requires extra string allocations during sorting, but this is not a
concern given the usage scenario and the number of CPU models that exist.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180606165527.17365-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Since the addition of the -IBRS CPU model variants, the descriptions
shown by '-cpu help' are not well aligned, as several model names
overflow the space allowed. Right aligning the CPU model names is also
not attractive, because it obscures the common name prefixes of many
models. The CPU model name field needs to be 4 characters larger, and
be left aligned instead.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180606165527.17365-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add support for cpuid leaf CPUID_8000_001E. Build the config that closely
match the underlying hardware. Please refer to the Processor Programming
Reference (PPR) for AMD Family 17h Model for more details.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <1528498581-131037-2-git-send-email-babu.moger@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add information for cpuid 0x8000001D leaf. Populate cache topology information
for different cache types (Data Cache, Instruction Cache, L2 and L3) supported
by 0x8000001D leaf. Please refer to the Processor Programming Reference (PPR)
for AMD Family 17h Model for more details.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <1527176614-26271-3-git-send-email-babu.moger@amd.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Always initialize CPUCaches structs with cache information, even
if legacy_cache=true. Use different CPUCaches struct for
CPUID[2], CPUID[4], and the AMD CPUID leaves.
This will simplify a lot the logic inside cpu_x86_cpuid().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <1527176614-26271-2-git-send-email-babu.moger@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Switch to the header we imported from Linux,
this allows us to drop a hack in kvm_i386.h.
More code will be dropped in the next patch.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
AMD Zen expose the Intel equivalant to Speculative Store Bypass Disable
via the 0x80000008_EBX[25] CPUID feature bit.
This needs to be exposed to guest OS to allow them to protect
against CVE-2018-3639.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180521215424.13520-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
New microcode introduces the "Speculative Store Bypass Disable"
CPUID feature bit. This needs to be exposed to guest OS to allow
them to protect against CVE-2018-3639.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Message-Id: <20180521215424.13520-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The property legacy-cache will be used to control the cache information.
If user passes "-cpu legacy-cache" then older information will
be displayed even if the hardware supports new information. Otherwise
use the statically loaded cache definitions if available.
Renamed the previous cache structures to legacy_*. If there is any change in
the cache information, then it needs to be initialized in builtin_x86_defs.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Tested-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20180514164156.27034-3-babu.moger@amd.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
