The loading time of a VM is quite significant when its virtio
devices use a large amount of virt-queues (e.g. a virtio-serial
device with max_ports=511). Most of the time is spend in the
creation of all the required event notifiers (ioeventfd and memory
regions).
This patch pack all the changes to the memory regions in a
single memory transaction.
Reported-by: Sitong Liu
Reported-by: Xiaoling Gao
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
The virtio_bus_set_host_notifier function no longer calls
event_notifier_cleanup when a event notifier is removed.
The commit updates the code to match the new behavior and calls
virtio_bus_cleanup_host_notifier after the notifier was de-assign
and no longer in use.
This change is a preparation to allow executing the
virtio_bus_set_host_notifier function in a memory region
transaction.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 6f0bb23072.
This reverts commit f87d72f5c5 as that is
reported to break cleanup and migration.
Cc: Gal Hammer <ghammer@redhat.com>
Cc: Sitong Liu <siliu@redhat.com>
Cc: Xiaoling Gao <xiagao@redhat.com>
Suggested-by: Greg Kurz <groug@kaod.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
The loading time of a VM is quite significant when its virtio
devices use a large amount of virt-queues (e.g. a virtio-serial
device with max_ports=511). Most of the time is spend in the
creation of all the required event notifiers (ioeventfd and memory
regions).
This patch pack all the changes to the memory regions in a
single memory transaction.
Reported-by: Sitong Liu <siliu@redhat.com>
Reported-by: Xiaoling Gao <xiagao@redhat.com>
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Backends don't need to know what frontend requested a reset,
and notifying then from virtio_error is messy because
virtio_error itself might be invoked from backend.
Let's just set the status directly.
Cc: qemu-stable@nongnu.org
Reported-by: Ilya Maximets <i.maximets@samsung.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A guest could attempt to use an uninitialised VirtQueue object
or unset Vring.align leading to a arithmetic exception. Add check
to avoid it.
Reported-by: Zhangboxian <zhangboxian@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
In case of backend crash, it is not possible to restore internal
avail index from the backend value as vhost_get_vring_base
callback fails.
This patch provides a new interface to restore internal avail index
from the vring used index, as done by some vhost-user backend on
reconnection.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we fail to hotplug virtio-blk device and then suspend
or shutdown VM, qemu is likely to crash.
Re-production steps:
1. Run VM named vm001
2. Create a virtio-blk.xml which contains wrong configurations:
<disk device="lun" rawio="yes" type="block">
<driver cache="none" io="native" name="qemu" type="raw" />
<source dev="/dev/mapper/11-dm" />
<target bus="virtio" dev="vdx" />
</disk>
3. Run command : virsh attach-device vm001 virtio-blk.xml
error: Failed to attach device from blk-scsi.xml
error: internal error: unable to execute QEMU command 'device_add': Please set scsi=off for virtio-blk devices in order to use virtio 1.0
it means hotplug virtio-blk device failed.
4. Suspend or shutdown VM will leads to qemu crash
Problem happens in virtio_vmstate_change which is called by
vm_state_notify:
vdev’s parent_bus is NULL, so qdev_get_parent_bus(DEVICE(vdev)) will crash.
virtio_vmstate_change is added to the list vm_change_state_head at virtio_blk_device_realize(virtio_init),
but after hotplug virtio-blk failed, virtio_vmstate_change will not be removed from vm_change_state_head.
Adding unrealize function of virtio-blk device can solve this problem.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While changing the s/g list allocation, commit 3b3b0628
also changed the descriptor counting to count iovec entries
as split by cpu_physical_memory_map(). Previously only the
actual descriptor entries were counted and the split into
the iovec happened afterwards in virtqueue_map().
Count the entries again instead to avoid erroneous
"Looped descriptor" errors.
Reported-by: Hans Middelhoek <h.middelhoek@ospito.nl>
Link: https://forum.proxmox.com/threads/vm-crash-with-memory-hotplug.35904/
Fixes: 3b3b062821 ("virtio: slim down allocation of VirtQueueElements")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vmstate_save_state is called in lots of places.
Route error returns from the easier cases back up; there are lots
of more complex cases where their own error paths need fixing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-7-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit message fix up as Peter's review
This tracepoint can help diagnosing failures due to memory
fragmentation in the guest.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This files don't use any function from migration.h, so drop it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
According to section 2.1.2 of the virtio-1 specification:
"The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state that
a reset is needed. If DRIVER_OK is set, after it sets DEVICE_NEEDS_RESET,
the device MUST send a device configuration change notification to the
driver."
Commit "f5ed36635d8f virtio: stop virtqueue processing if device is broken"
introduced a virtio_error() call that just does that:
- internally mark the device as broken
- set the DEVICE_NEEDS_RESET bit in the status
- send a configuration change notification
Unfortunately, virtio_notify_vector(), called by virtio_notify_config(),
returns right away when the device is marked as broken and the notification
isn't sent in this case.
The spec doesn't say whether a broken device can send notifications
in other situations or not. But since the driver isn't supposed to do
anything but to reset the device, it makes sense to keep the check in
virtio_notify_config().
Marking the device as broken AFTER the configuration change notification was
sent is enough to fix the issue.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit ad07cd6 ("virtio-scsi: always use dataplane path if ioeventfd is
active", 2016-10-30) and 9ffe337 ("virtio-blk: always use dataplane
path if ioeventfd is active", 2016-10-30) broke the virtio 1.0
indirect access registers.
The indirect access registers bypass the ioeventfd, so that virtio-blk
and virtio-scsi now repeatedly try to initialize dataplane instead of
triggering the guest->host EventNotifier. Detect the situation by
checking vq->handle_aio_output; if it is not NULL, trigger the
EventNotifier, which is how the device expects to get notifications
and in fact the only thread-safe manner to deliver them.
Fixes: ad07cd6
Fixes: 9ffe337
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
We don't check the return value of address_space_cache_init(), this
may lead buggy driver use incorrect region caches. Instead of
triggering an assert, catch and warn this early in
virtio_init_region_cache().
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't destroy region cache during reset which can make the maps
of previous driver leaked to a buggy or malicious driver that don't
set vring address before starting to use the device. Fix this by
destroy the region cache during reset and validate it before trying to
see them.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To avoid access stale memory region cache after reset, this patch
check the existence of virtqueue pfn for all exported virtqueue access
helpers before trying to use them.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 97cd965c07 ("virtio: use
VRingMemoryRegionCaches for avail and used rings") switched to a memory
region cache to avoid repeated map/unmap operations.
The virtio_load() process is a little tricky because vring addresses are
serialized in two separate places. VIRTIO 1.0 devices serialize desc
and then a subsection with used and avail. Legacy devices only
serialize desc.
Live migration of VIRTIO 1.0 devices fails on the destination host with:
VQ 0 size 0x80 < last_avail_idx 0x12f8 - used_idx 0x0
Failed to load virtio-blk:virtio
error while loading state for instance 0x0 of device '0000:00:04.0/virtio-blk'
This happens because the memory region cache is only initialized after
desc is loaded and not after the used and avail subsection is loaded.
If the guest chose memory addresses that don't match the legacy ring
layout then the wrong guest memory location is accessed.
Wait until all ring addresses are known before trying to initialize the
region cache. Also clarify the incomplete comment about VIRTIO-1 ring
address subsection.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Remember to invalidate the avail event field so the memory pages are
marked dirty.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Switching to vring caches exposed an existing bug in
virtio_queue_set_notification(): We can't access vring structures
if they have not been set up yet. This may happen, for example,
for virtio-blk devices with multiple queues: The code will try to
switch notifiers for every queue, but the guest may have only set up
a subset of them.
Fix this by guarding access to the vring memory by checking for
vring.desc. The first aio poll will iron out any remaining
inconsistencies for later-configured queues (buggy legacy drivers).
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vring has not been set up, there is nothing in the virtqueue.
virtio_queue_host_notifier_aio_poll calls virtio_queue_empty even in
this case; we have to filter it out just like virtio_queue_notify_aio_vq.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
For ARM virt machine, if we use virt-2.7 which will not create ITS node,
the virtio-net can not recieve interrupts so it can't get ip address
through dhcp.
This fixes commit 83d768b(virtio: set ISR on dataplane notifications).
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio-net change is necessary because it uses virtqueue_fill
and virtqueue_flush instead of the more convenient virtqueue_push.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vring has not been set up, it is not necessary for vring_used_idx
to do anything (as is already the case when the caller is virtio_load).
This is harmless for now, but it will be a problem when the
MemoryRegionCache has not been set up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The cached translations are RCU-protected to allow efficient use
when processing virtqueues.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now, the cache is created on every virtqueue_pop. Later on,
direct descriptors will be able to reuse it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This makes little difference, but it makes the code change smaller
for the next patch that introduces MemoryRegionCache. This is
because map/unmap are similar to MemoryRegionCache init/destroy.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In virtio_queue_host_notifier_aio_poll, not all "!virtio_queue_empty()"
cases are making true progress.
Currently the offending one is virtio-scsi event queue, whose handler
does nothing if no event is pending. As a result aio_poll() will spin on
the "non-empty" VQ and take 100% host CPU.
Fix this by reporting actual progress from virtio queue aio handlers.
Reported-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Ed Swierk <eswierk@skyportsystems.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- rework of the zpci code, giving us proper multibus support
- introduction of the 2.9 machine
- fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fzmu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170120-v2' into staging
First set of s390x patches for 2.9:
- rework of the zpci code, giving us proper multibus support
- introduction of the 2.9 machine
- fixes and improvements
# gpg: Signature made Fri 20 Jan 2017 09:11:58 GMT
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20170120-v2:
virtio-ccw: fix ring sizing
s390x/pci: merge msix init functions
s390x/pci: handle PCIBridge bus number
s390x/pci: use hashtable to look up zpci via fh
s390x/pci: PCI multibus bridge handling
s390x/pci: optimize calling s390_get_phb()
s390x/pci: change the device array to a list
s390x/pci: dynamically allocate iommu
s390x/pci: make S390PCIIOMMU inherit Object
s390x/kvm: use kvm_gsi_routing_enabled in flic
s390x: add compat machine for 2.9
s390x: remove double compat statement
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current code seems to assume ring size is
always decreased but this is not required by spec:
what spec says is just that size can not exceed
the maximum. Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1484256243-1982-1-git-send-email-mst@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Coverity reports that ARRAY_SIZE(elem->out_sg) (and all the others too)
is wrong because elem->out_sg is a pointer.
However, the check is not in the right place and the max_size argument
of virtqueue_map_iovec can be removed. The check on in_num/out_num
should be moved to qemu_get_virtqueue_element instead, before the call
to virtqueue_alloc_element.
Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 3724650db0 ("virtio: introduce virtqueue_alloc_element")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
While AioContext is in polling mode virtqueue notifications are not
necessary. Some device virtqueue handlers enable notifications. Make
sure they stay disabled to avoid unnecessary vmexits.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit aff8fd18f1.
Both virtio-net and virtio-crypto do not balance
virtio_queue_set_notification() enable and disable calls. This makes
the notifications_disabled counter unreliable and Doug Goldstein
reported the following assertion failure:
#3 0x00007ffff44d1c62 in __GI___assert_fail (
assertion=assertion@entry=0x555555ae8e8a "vq->notification_disabled > 0",
file=file@entry=0x555555ae89c0 "/home/doug/work/qemu/hw/virtio/virtio.c",
line=line@entry=215,
function=function@entry=0x555555ae9630 <__PRETTY_FUNCTION__.43707>
"virtio_queue_set_notification") at assert.c:101
#4 0x00005555557f25d6 in virtio_queue_set_notification (vq=0x55555666aa90,
enable=enable@entry=1) at /home/doug/work/qemu/hw/virtio/virtio.c:215
#5 0x00005555557dc311 in virtio_net_has_buffers (q=<optimized out>,
q=<optimized out>, bufsize=102)
at /home/doug/work/qemu/hw/net/virtio-net.c:1008
#6 virtio_net_receive (nc=<optimized out>, buf=0x555557386b88 "", size=102)
at /home/doug/work/qemu/hw/net/virtio-net.c:1148
#7 0x00005555559cad33 in nc_sendv_compat (flags=<optimized out>, iovcnt=1,
iov=0x7fffead746d0, nc=0x55555788b340) at net/net.c:705
#8 qemu_deliver_packet_iov (sender=<optimized out>, flags=<optimized out>,
iov=0x7fffead746d0, iovcnt=1, opaque=0x55555788b340) at net/net.c:732
#9 0x00005555559cd929 in qemu_net_queue_deliver (size=<optimized out>,
data=<optimized out>, flags=<optimized out>, sender=<optimized out>,
queue=0x55555788b550) at net/queue.c:164
#10 qemu_net_queue_flush (queue=0x55555788b550) at net/queue.c:261
This patch is safe to revert since it's just an optimization for
virtqueue polling. The next patch will improve the situation again
without resorting to nesting.
Reported-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove the useless is_external argument. Since the iohandler
AioContext is never used for block devices, aio_disable_external
is never called on it. This lets us remove stubs/iohandler.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add procedure for fast drop of queued packets, acting like
pop and push without mapping the buffers into memory.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bring virtio queue to correct internal state for host-to-guest
operations when vhost is temporary stopped.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Correct recalculation of vq->inuse after migration for the corner case
where the avail_idx has already wrapped but used_idx not yet.
Also change the type of the VirtQueue.inuse to unsigned int. This is
done to be consistent with other members representing sizes (VRing.num),
and because C99 guarantees max ring size < UINT_MAX but does not
guarantee max ring size < INT_MAX.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes: bccdef6b ("virtio: recalculate vq->inuse after migration")
CC: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, all virtio devices bypass IOMMU completely. This is because
address_space_memory is assumed and used during DMA emulation. This
patch converts the virtio core API to use DMA API. This idea is
- introducing a new transport specific helper to query the dma address
space. (only pci version is implemented).
- query and use this address space during virtio device guest memory
accessing when iommu platform (VIRTIO_F_IOMMU_PLATFORM) was enabled
for this device.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a performance optimization to eliminate vmexits during polling.
It also avoids spurious ioeventfd processing after polling ends.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-12-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Polling should disable virtqueue notifications but that requires nested
virtio_queue_set_notification() calls. Turn vq->notification into a
counter so it is possible to do nesting.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-10-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add an AioContext poll handler to detect new virtqueue buffers without
waiting for a guest->host notification.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new AioPollFn io_poll() argument to aio_set_fd_handler() and
aio_set_event_handler() is used in the next patch.
Keep this code change separate due to the number of files it touches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Dataplane has been omitting forever the step of setting ISR when
an interrupt is raised. This caused little breakage, because the
specification actually says that ISR may not be updated in MSI mode.
Some versions of the Windows drivers however didn't clear MSI mode
correctly, and proceeded using polling mode (using ISR, not the used
ring index!) for crashdump and hibernation. If it were just crashdump
and hibernation it would not be a big deal, but recent releases of
Windows do not really shut down, but rather log out and hibernate to
make the next startup faster. Hence, this manifested as a more serious
hang during shutdown with e.g. Windows 8.1 and virtio-win 1.8.0 RPMs.
Newer versions fixed this, while older versions do not use MSI at all.
The failure has always been there for virtio dataplane, but it became
visible after commits 9ffe337 ("virtio-blk: always use dataplane path
if ioeventfd is active", 2016-10-30) and ad07cd6 ("virtio-scsi: always
use dataplane path if ioeventfd is active", 2016-10-30) made virtio-blk
and virtio-scsi always use the dataplane code under KVM. The good news
therefore is that it was not a bug in the patches---they were doing
exactly what they were meant for, i.e. shake out remaining dataplane bugs.
The fix is not hard, so it's worth arranging for the broken drivers.
The virtio_should_notify+event_notifier_set pair that is common to
virtio-blk and virtio-scsi dataplane is replaced with a new public
function virtio_notify_irqfd that also sets ISR. The irqfd emulation
code now need not set ISR anymore, so virtio_irq is removed.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be needed once dataplane will be able to set it outside
the big QEMU lock.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the recent refactoring of virtio notifiers [1], more specifically
the patch ed08a2a0b ("virtio: use virtio_bus_set_host_notifier to
start/stop ioeventfd") that uses virtio_bus_set_host_notifier [2]
by default, core virtio code requires 'ioeventfd_started' to be set
to true/false when the host notifiers are configured.
When vhost is stopped and started, however, there is a stop followed by
another start. Since ioeventfd_started was never set to true, the 'stop'
operation triggered by virtio_bus_set_host_notifier() will not result
in a call to virtio_pci_ioeventfd_assign(assign=false). This leaves
the memory regions with stale notifiers and results on the next start
triggering the following assertion:
kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
Aborted
This patch reintroduces (hopefully in a cleaner way) the concept
that was present with ioeventfd_disabled before the refactoring.
When ioeventfd_grabbed>0, ioeventfd_started tracks whether ioeventfd
should be enabled or not, but ioeventfd is actually not started at
all until vhost releases the host notifiers.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-10/msg07748.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-10/msg07760.html
Reported-by: Felipe Franciosi <felipe@nutanix.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Fixes: ed08a2a0b ("virtio: use virtio_bus_set_host_notifier to start/stop ioeventfd")
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These are not used anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Legacy features are those that transitional devices only
expose on the legacy interface.
Allow different ones per device class.
Cc: qemu-stable@nongnu.org # dependency for the next patch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The function does not fully initialize the returned VirtQueueElement and should
be used only internally from the virtio module.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function undoes the effect of virtqueue_pop and doesn't do anything
destructive or irreversible so virtqueue_unpop is a more fitting name.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Of the three possible parameter combinations for
virtio_queue_set_host_notifier_fd_handler:
- assign=true/set_handler=true is only called from
virtio_device_start_ioeventfd
- assign=false/set_handler=false is called from
set_host_notifier_internal but it only does something when
reached from virtio_device_stop_ioeventfd_impl; otherwise
there is no EventNotifier set on qemu_get_aio_context().
- assign=true/set_handler=false is called from
set_host_notifier_internal, but it is not doing anything:
with the new start_ioeventfd and stop_ioeventfd methods,
there is never an EventNotifier set on qemu_get_aio_context()
at this point. This is enforced by the assertion in
virtio_bus_set_host_notifier.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ioeventfd_disabled was the only reason for the default
implementation of virtio_device_start_ioeventfd not to use
virtio_bus_set_host_notifier. This is now fixed, and the sole entry
point to set up ioeventfd can be virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make virtio_device_start_ioeventfd_impl use the same logic as
dataplane to set up the host notifier. This removes the need
for the set_handler argument in set_host_notifier_internal.
This is a first step towards using virtio_bus_set_host_notifier
as the sole entry point to set up ioeventfds. At least now
the functions have the same interface, but they still differ
in that virtio_bus_set_host_notifier sets ioeventfd_disabled.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 872dd82c83.
virtio_add_queue_aio is unused.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be used to forbid iothread configuration when the
proxy does not allow using ioeventfd. To simplify the implementation,
change the direction of the ioeventfd_disabled callback too.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow customization of the start and stop of ioeventfd. This will
allow direct start of dataplane without passing through the default
ioeventfd handlers, which in turn allows using the dataplane logic
instead of virtio_add_queue_aio. It will also enable some code
simplification, because the sole entry point to ioeventfd setup
will be virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a vmsd pointer for VirtIO devices to use instead of the
load/save methods.
We'll eventually kill off the load/save methods.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone,
so we can get rid of the conditionals, and the old macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In most cases the functions passed to VMSTATE_VIRTIO_DEVICE
only call the virtio_load and virtio_save wrappers. Some include some
pre- and post- massaging too. The massaging is better expressed
as such in the VMStateDescription.
Let us prepare for changing the semantic of the VMSTATE_VIRTIO_DEVICE
macro so that it is more similar to the other VMSTATE_*_DEVICE macros
in a sense that it is a field definition.
The preprocessor conditionals are going to be removed as soon as
every usage is converted to the new semantic.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During device reset or similar situations a VirtQueueElement needs to be
freed without pushing it onto the used ring or rewinding the virtqueue.
Extract a new function to do this.
Later patches add virtio_detach_element() calls to existing device so
that scatter-gather lists are unmapped and vq->inuse goes back to zero
during device reset. Currently some devices don't bother and simply
call g_free(elem) which is not a clean way to throw away a
VirtQueueElement.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stop processing the vring if virtqueue_get_head() fetches an
out-of-bounds head index.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If the avail ring index is bogus virtqueue_num_heads() must return
-EINVAL.
The only caller is virtqueue_get_avail_bytes(). Return saying no bytes
are available when virtqueue_num_heads() fails.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Stop processing the vring if an avail ring index is invalid.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The virtio code uses int, unsigned int, and uint16_t for virtqueue
indices. The uint16_t is used for the low-level descriptor layout in
virtio_ring.h while code that isn't concerned with descriptor layout can
use unsigned int.
Use of int is problematic because it can result in signed/unsigned
comparison and incompatible int*/unsigned int* pointer types.
Make the virtqueue_get_avail_bytes() 'i' variable unsigned int. This
eliminates the need to introduce casts and modify code further in the
patches that follow.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If the vring is invalid, tell the caller no bytes are available and mark
the device broken.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Errors can occur during virtqueue_pop(), especially in
virtqueue_map_desc(). In order to handle this we must unmap iov[]
before returning NULL. The caller will consider the virtqueue empty and
the virtio_error() call will have marked the device broken.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Send a subsection if the vdev->broken flag is set. This allows live
migration of broken virtio devices.
The subsection is only sent if vdev->broken has been set. In most cases
the flag will be clear and no subsection will be sent.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
QEMU prints an error message and exits when the device enters an invalid
state. Terminating the process is heavy-handed. The guest may still be
able to function even if there is a bug in a virtio guest driver.
Moreover, exiting is a bug in nested virtualization where a nested guest
could DoS other nested guests by killing a pass-through virtio device.
I don't think this configuration is possible today but it is likely in
the future.
If the broken flag is set, do not process virtqueues or write back used
descriptors. The broken flag can be cleared again by resetting the
device.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Fix a single occurrence of a tab character in a file that otherwise uses
spaces for indentation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
virtio back end uses set of buffers to facilitate I/O operations.
If its size is too large, 'cpu_physical_memory_map' could return
a null address. This would result in a null dereference while
un-mapping descriptors. Add check to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
virtqueue_discard() requires a VirtQueueElement but virtio-balloon does
not migrate its in-use element. Introduce a new function that is
similar to virtqueue_discard() but doesn't require a VirtQueueElement.
This will allow virtio-balloon to access element again after migration
with the usual proviso that the guest may have modified the vring since
last time.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vq->inuse must be zeroed upon device reset like most other virtqueue
fields.
In theory, virtio_reset() just needs assert(vq->inuse == 0) since
devices must clean up in-flight requests during reset (requests cannot
not be leaked!).
In practice, it is difficult to achieve vq->inuse == 0 across reset
because balloon, blk, 9p, etc implement various different strategies for
cleaning up requests. Most devices call g_free(elem) directly without
telling virtio.c that the VirtQueueElement is cleaned up. Therefore
vq->inuse is not decremented during reset.
This patch zeroes vq->inuse and trusts that devices are not leaking
VirtQueueElements across reset.
I will send a follow-up series that refactors request life-cycle across
all devices and converts vq->inuse = 0 into assert(vq->inuse == 0) but
this more invasive approach is not appropriate for stable trees.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
virtqueue_discard() moves vq->last_avail_idx back so the element can be
popped again. It's necessary to decrement vq->inuse to avoid "leaking"
the element count.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vq->inuse field is not migrated. Many devices don't hold
VirtQueueElements across migration so it doesn't matter that vq->inuse
starts at 0 on the destination QEMU.
At least virtio-serial, virtio-blk, and virtio-balloon migrate while
holding VirtQueueElements. For these devices we need to recalculate
vq->inuse upon load so the value is correct.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
a bunch of bugfixes and a couple of cleanups
making these easier and/or making debugging easier
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXmslFAAoJECgfDbjSjVRpev0IAMZghEuSeKMB2JR88dErS8P5
J6y/1W2VFuRa1YBkTz/ecr5r2RwIO5teZUZpUkibM65Zo6bu1liMo6gbzeCg/xOi
k437pNRl6W9RVWuXQM9VOegNoGYhX3Hrnu3iQeiT8KRY3OMCwG52umUXYVodJh1R
mlozlEcSyUEDZVdNjhRECuUiw8RRcErEtiKda+zjkf4tPAGkyCItVpLYshE6A2/I
lfQLkv+EWOyuD4cfEHl+4F9K9wegothFTSd/xBmcqqaWRc+pboMVF2A2yga+GjKm
Xgb8SzQYkt9Q1nFr9fz89q89CsjhmfrD/ct/vJAcCFnw/dNXnC6mYjr6MDX0Gd0=
=26Uu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: cleanups, fixes
a bunch of bugfixes and a couple of cleanups
making these easier and/or making debugging easier
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 29 Jul 2016 04:11:01 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (41 commits)
mptsas: Fix a migration compatible issue
vhost: do not update last avail idx on get_vring_base() failure
vhost: add vhost_net_set_backend()
vhost-user: add error report in vhost_user_write()
tests: fix vhost-user-test leak
tests: plug some leaks in virtio-net-test
vhost-user: wait until backend init is completed
char: add and use tcp_chr_wait_connected
char: add chr_wait_connected callback
vhost: add assert() to check runtime behaviour
vhost-net: vhost_migration_done is vhost-user specific
Revert "vhost-net: do not crash if backend is not present"
vhost-user: add get_vhost_net() assertions
vhost-user: keep vhost_net after a disconnection
vhost-user: check vhost_user_{read,write}() return value
vhost-user: check qemu_chr_fe_set_msgfds() return value
vhost-user: call set_msgfds unconditionally
qemu-char: fix qemu_chr_fe_set_msgfds() crash when disconnected
vhost: use error_report() instead of fprintf(stderr,...)
vhost: add missing VHOST_OPS_DEBUG
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio back end uses set of buffers to facilitate I/O operations.
An infinite loop unfolds in virtqueue_pop() if a buffer was
of zero size. Add check to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
A broken or malicious guest can submit more requests than the virtqueue
size permits, causing unbounded memory allocation in QEMU.
The guest can submit requests without bothering to wait for completion
and is therefore not bound by virtqueue size. This requires reusing
vring descriptors in more than one request, which is not allowed by the
VIRTIO 1.0 specification.
In "3.2.1 Supplying Buffers to The Device", the VIRTIO 1.0 specification
says:
1. The driver places the buffer into free descriptor(s) in the
descriptor table, chaining as necessary
and
Note that the above code does not take precautions against the
available ring buffer wrapping around: this is not possible since the
ring buffer is the same size as the descriptor table, so step (1) will
prevent such a condition.
This implies that placing more buffers into the virtqueue than the
descriptor table size is not allowed.
QEMU is missing the check to prevent this case. Processing a request
allocates a VirtQueueElement leading to unbounded memory allocation
controlled by the guest.
Exit with an error if the guest provides more requests than the
virtqueue size permits. This bounds memory allocation and makes the
buggy guest visible to the user.
This patch fixes CVE-2016-5403 and was reported by Zhenhao Hong from 360
Marvel Team, China.
Reported-by: Zhenhao Hong <hongzhenhao@360.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To make conversion of virtio devices to VMState simple
at first add a helper function for the simple virtio_save
case and a helper macro that defines the VMState structure.
These will probably go away or change as more of the virtio
code gets converted.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Using this function instead of virtio_add_queue marks the vq as aio
based. This differentiation will be useful in later patches.
Distinguish between virtqueue processing in the iohandler context and main loop
AioContext. iohandler context is isolated from AioContexts and therefore does
not run during aio_poll().
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
The function pointer signature has been repeated a few times, using a
typedef may make coding easier.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
virtio migrates the low 32 feature bits twice, the first copy is there
for compatibility but ever since
019a3edbb2: ("virtio: make features 64bit
wide") it's ignored on load. This is wrong since virtio_net_load tests
self announcement and guest offloads before the second copy including
high feature bits is loaded. This means that self announcement, control
vq and guest offloads are all broken after migration.
Fix it up by loading low feature bits: somewhat ugly since high and low
bits become out of sync temporarily, but seems unavoidable for
compatibility. The right thing to do for new features is probably to
test the host features, anyway.
Fixes: 019a3edbb2
("virtio: make features 64bit wide")
Cc: qemu-stable@nongnu.org
Reported-by: Robin Geuze <robing@transip.nl>
Tested-by: Robin Geuze <robing@transip.nl>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio_queue_get_id() function is the lesser used duplicate of
virtio_get_queue_index(). Use the latter instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1463767461-17922-1-git-send-email-stefanha@redhat.com
The effect of this change is the block layer drained section can work,
for example when mirror job is being completed.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers pass "false" keeping the old semantics. The windows
implementation doesn't distinguish the flag yet. On posix, it is passed
down to the underlying aio context.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Eliminating the reentrancy is actually a nice thing that we can do
with the API that Michael proposed, so let's make it first class.
This also hides the complex assign/set_handler conventions from
callers of virtio_queue_aio_set_host_notifier_handler, which in
fact was always called with assign=true.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In addition to handling IO in vcpu thread and in io thread, blk dataplane
introduces yet another mode: handling it by AioContext.
Currently, this reuses the same handler as previous modes,
which triggers races as these were not designed to be reentrant.
Add instead a separate handler just for aio; this will make
it possible to disable regular handlers when dataplane is active.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Virtio dataplane needs to trigger the irq manually through the
guest notifier. Export virtio_should_notify so that it can be
used around event_notifier_set.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
This is used to register ioeventfd with a dataplane thread.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Since guest_mask_notifier can not be used in vhost-user mode due
to buffering implied by unix control socket, force
use_mask_notifier on virtio devices of vhost-user interfaces, and
send correct callfd to the guest at vhost start.
Using guest_notifier_mask function in vhost-user case may
break interrupt mask paradigm, because mask/unmask is not
really done when returning from guest_notifier_mask call, instead
message is posted in a unix socket, and processed later.
Add an option boolean flag 'use_mask_notifier' to disable the use
of guest_notifier_mask in virtio pci.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fill in an element of the used ring with a single combined access to the
guest physical memory, rather than using two separated accesses.
This reduces the overhead due to expensive address translation.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Message-Id: <e4a89a767a4a92cbb6bcc551e151487eb36e1722.1450218353.git.v.maffione@gmail.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtqueue_pop() implementation needs to check if the avail ring
contains some pending buffers. To perform this check, it is not
always necessary to fetch the avail_idx in the VQ memory, which is
expensive. This patch introduces a shadow variable tracking avail_idx
and modifies virtio_queue_empty() to access avail_idx in physical
memory only when necessary.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Message-Id: <b617d6459902773d9f4ab843bfaca764f5af8eda.1450218353.git.v.maffione@gmail.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Accessing used_idx in the VQ requires an expensive access to
guest physical memory. Before this patch, 3 accesses are normally
done for each pop/push/notify call. However, since the used_idx is
only written by us, we can track it in our internal data structure.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Message-Id: <3d062ec54e9a7bf9fb325c1fd693564951f2b319.1450218353.git.v.maffione@gmail.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Compared to vring, virtio has a performance penalty of 10%. Fix it
by combining all the reads for a descriptor in a single address_space_read
call. This also simplifies the code nicely.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Build the addresses and s/g lists on the stack, and then copy them
to a VirtQueueElement that is just as big as required to contain this
particular s/g list. The cost of the copy is minimal compared to that
of a large malloc.
When virtqueue_map is used on the destination side of migration or on
loadvm, the iovecs have already been split at memory region boundary,
so we can just reuse the out_num/in_num we find in the file.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allocate the arrays for in_addr/out_addr/in_sg/out_sg outside the
VirtQueueElement. For now, virtqueue_pop and vring_pop keep
allocating a very large VirtQueueElement.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move allocation to virtio functions also when loading/saving a
VirtQueueElement. This will also let the load/save functions
keep backwards compatibility when the VirtQueueElement layout
is changed.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The return code of virtqueue_pop/vring_pop is unused except to check for
errors or 0. We can thus easily move allocation inside the functions
and just return a pointer to the VirtQueueElement.
The advantage is that we will be able to allocate only the space that
is needed for the actual size of the s/g list instead of the full
VIRTQUEUE_MAX_SIZE items. Currently VirtQueueElement takes about 48K
of memory, and this kind of allocation puts a lot of stress on malloc.
By cutting the size by two or three orders of magnitude, malloc can
use much more efficient algorithms.
The patch is pretty large, but changes to each device are testable
more or less independently. Splitting it would mostly add churn.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
I misunderstood the vmstate macro definition when I reworked the
virtio .get/.put.
The VMSTATE_STRUCT_VARRAY_KNOWN, was described as being for "a
variable length array (i.e. _type *_field) but we know the
length". However it actually specified operation for arrays embedded in
the struct (i.e. _type _field[]) since it lacked the VMS_POINTER
flag. This caused offset calculation to be completely off, examining and
potentially sending random data instead of the VirtQueue content.
Replace the otherwise unused VMSTATE_STRUCT_VARRAY_KNOWN with a
VMSTATE_STRUCT_VARRAY_POINTER_KNOWN that includes the VMS_POINTER flag
(so now actually doing what it advertises) and use it in the virtio
migration code.
Fixes and description as per Sascha's suggestions/debug.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Tested-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Fixes: 50e5ae4dc3
Fixes: 2cf0148674
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-15-git-send-email-peter.maydell@linaro.org
There's no such thing as "PCI queues" in the virtio core.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'virtqueue_state' and 'ringsize' can be saved using VMSTATE
macros rather than hand coded .get/.put
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
We don't migrate the followings fields for virtio-pci:
uint32_t dfselect;
uint32_t gfselect;
uint32_t guest_features[2];
struct {
uint16_t num;
bool enabled;
uint32_t desc[2];
uint32_t avail[2];
uint32_t used[2];
} vqs[VIRTIO_QUEUE_MAX];
This will confuse driver if migrating during initialization. Solves
this issue by:
- introduce transport specific callbacks to load and store extra
virtqueue states.
- add a new subsection for virtio to migrate transport specific modern
device state.
- implement pci specific callbacks.
- add a new property for virtio-pci for whether or not to migrate
extra state.
- compat the migration for 2.4 and elder machine types
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Drop use of the deprecated virtio_map_sg in virtio core.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
virtio_map_sg currently fails if one of the entries it's mapping is
contigious in GPA but not HVA address space. Introduce virtio_map which
handles this by splitting sg entries.
This new API generally turns out to be a good idea since it's harder to
misuse: at least in one case the existing one was used incorrectly.
This will still fail if there's no space left in the sg, but luckily max
queue size in use is currently 256, while max sg size is 1024, so we
should be OK even is all entries happen to cross a single DIMM boundary.
Won't work well with very small DIMM sizes, unfortunately:
e.g. this will fail with 4K DIMMs where a single
request might span a large number of DIMMs.
Let's hope these are uncommon - at least we are not breaking things.
Note: virtio-scsi calls virtio_map_sg on data loaded from network, and
validates input, asserting on failure. Copy the validating code here -
it will be dropped from virtio-scsi in a follow-up patch.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This patch introduces virtqueue_discard() to discard a descriptor and
unmap the sgs. This will be used by the patch that will discard
descriptor when packet is truncated.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Factor out sg unmapping logic. This will be reused by the patch that
can discard descriptor.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Andrew James <andrew.james@hpe.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We allow guests to change the size of the virtqueue rings by supplying
a number of buffers that is different from the number of buffers the
device was initialized with. Current code has some problems, however,
since reset does not reset the ringsizes to the default values (as this
is not saved anywhere).
Let's extend the core code to keep track of the default ringsizes and
migrate them once the guest changed them for any of the virtqueues
for a device.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Being working on dataplane I notice something strange:
virtio_queue_get_avail_size() used a 64bit size index
for the calculation of the available ring size.
It is quite strange but it did work with the old calculation
of the avail ring, at most with performance penalty,
and I wonder where I missed something.
This patch let use a 16bit size as defined in virtio_ring.h
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit ef546f1275 ("virtio: add
feature checking helpers") introduced a helper __virtio_has_feature.
We don't want to use reserved identifiers, though, so let's
rename __virtio_has_feature to virtio_has_feature and virtio_has_feature
to virtio_vdev_has_feature.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
1.0 does not requires physically-contiguous pages layout for a
virtqueue. So we could not infer avail and used from desc. This means
we need to migrate vring.avail and vring.used when host support virtio
1.0. This fixes malfunction of virtio 1.0 device after migration.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
virtio 1.0 defines config space as LE,
as opposed to pre-1.0 which was native endian.
Add API for transports to execute word/dword accesses in
little endian format - will be useful for mmio
and pci (byte access is also wrapped, for completeness).
For simplicity, we still keep config in host native
endian format, byteswap to LE on guest access.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
virtio-1 allow setting of the FEATURES_OK status bit to fail if
the negotiated feature bits are inconsistent: let's fail
virtio_set_status() in that case and update virtio-ccw to post an
error to the guest.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
For virtio-1 devices, the driver must not attempt to set feature bits
after it set FEATURES_OK in the device status. Simply reject it in
that case.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
For virtio-1 devices, we allow a more complex queue layout that doesn't
require descriptor table and rings on a physically-contigous memory area:
add virtio_queue_set_rings() to allow transports to set this up.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Add code that checks for the VERSION_1 feature bit in order to make
decisions about the device's endianness. This allows us to support
transitional devices.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Commit "019a3ed virtio: make features 64bit wide" missed a few changes,
as I've noticed while trying to rebase the virtio-1 branch to latest
master. This patch adds them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make features 64bit wide everywhere.
On migration a full 64bit guest_features field is sent if one of the
high bits is set, in addition to the lower 32bit guest_features field
which must stay for compatibility reasons. That way we send the lower
32 feature bits twice, but the code is simpler because we don't have
to split and compose the 64bit features into two 32bit fields.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_PCI_QUEUE_MAX is not only used for pci, so rename it be generic.
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces virtio_get_num_queues() which iterates the vqs
array and return the number of virtqueues used by device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch passes error pointer to transport specific device_plugged()
callback. Through this way, device_plugged() can do some transport
specific check and fail. This will be uesd by following patches that
check the number of virtqueues against the transport limitation.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move host_features from the individual transport proxies into
the virtio device. Transports may continue to add feature bits
during device plugging.
This should it make easier to offer different sets of host features
for virtio-1/transitional support.
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently we will try to traverse all virtqueues to find a subset that
using a specific vector. This is sub optimal when we will support
hundreds or even thousands of virtqueues. So this patch introduces a
method which could be used by transport to get all virtqueues that
using a same vector. This is done through QLISTs and the number of
QLISTs was queried through a transport specific method. When guest
setting vectors, the virtqueue will be linked and helpers for traverse
the list was also introduced.
The first user will be virtio pci which will use this to speed up
MSI-X masking and unmasking handling.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't validate the existence of handle_output which may let a buggy
guest to trigger a SIGSEV easily. E.g:
1) write 10 to queue_sel to a virtio net device with only 1 queue
2) setup an arbitrary pfn
3) then notify queue 10
Fixing this by validating the existence of handle_output before.
Cc: qemu-stable@nongnu.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Add a helper function for checking whether a bit is set in the guest
features for a vdev as well as one that works on a feature bit set.
Convert code that open-coded this: It cleans up the code and makes it
easier to extend the guest feature bits.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop a bunch of code duplicated from virtio_config.h and virtio_ring.h.
This makes us rename event index accessors which conflict,
as reusing the ones from virtio_ring.h isn't trivial.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
One of the annoyances of the current migration format is the fact that
it's not self-describing. In fact, it's not properly describing at all.
Some code randomly scattered throughout QEMU elaborates roughly how to
read and write a stream of bytes.
We discussed an idea during KVM Forum 2013 to add a JSON description of
the migration protocol itself to the migration stream. This patch
adds a section after the VM_END migration end marker that contains
description data on what the device sections of the stream are composed of.
This approach is backwards compatible with any QEMU version reading the
stream, because QEMU just stops reading after the VM_END marker and ignores
any data following it.
With an additional external program this allows us to decipher the
contents of any migration stream and hopefully make migration bugs easier
to track down.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The event idx in virtio is an effective way to reduce the number of
interrupts and exits of the guest. When the guest puts an request
into the virtio ring, it doesn't exit immediately to inform the
backend. Instead, the guest checks the "avail" event idx to determine
the notification.
In virtqueue_pop, when a request is poped, the current avail event
idx should be set to the number of vq->last_avail_idx.
Signed-off-by: Bin Wu <wu.wubin@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
For better code sharing, add a helper function that handles
reference counting of the virtio backend for virtio proxy devices.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit a1bc7b827e422e1ff065640d8ec5347c4aadfcd8.
virtio: don't call device on !vm_running
It turns out that virtio net assumes that vm_running
is updated before device status callback in many places,
so this change leads to asserts.
Previous commit fixes the root issue that motivated
a1bc7b827e422e1ff065640d8ec5347c4aadfcd8 differently,
so there's no longer a need for this change.
In the future, we might be able to drop checking vm_running
completely, and check vm state directly.
Reported-by: Dietmar Maurer <dietmar@proxmox.com>
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On vm stop, virtio changes vm_running state
too soon, so callbacks can get envoked with
vm_running = false;
Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Quoting original text from Rusty: "This is based on a simpler patch by Anthony
Liguouri".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[ add VirtIODevice * argument to most helpers,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some CPU families can dynamically change their endianness. This means we
can have little endian ppc or big endian arm guests for example. This has
an impact on legacy virtio data structures since they are target endian.
We hence introduce a new property to track the endianness of each virtio
device. It is reasonnably assumed that endianness won't change while the
device is in use : we hence capture the device endianness when it gets
reset.
We migrate this property in a subsection, after the device descriptor. This
means the load code must not rely on it until it is restored. As a consequence,
the vring sanity checks had to be moved after the call to vmstate_load_state().
We enforce paranoia by poisoning the property at the begining of virtio_load().
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is a need to add some more fields to VirtIODevice that should be
migrated (broken status, endianness). The problem is that we do not
want to break compatibility while adding a new feature... This issue has
been addressed in the generic VMState code with the use of optional
subsections. As a *temporary* alternative to port the whole virtio
migration code to VMState, this patch mimics a similar subsectionning
ability for virtio, using the VMState code.
Since each virtio device is streamed in its own section, the idea is to
stream subsections between the end of the device section and the start
of the next sections. This allows an older QEMU to complain and exit
when fed with subsections:
Unknown savevm section type 5
load of migration failed
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to migrate virtio subsections, they should be streamed after
the device itself. We need the device specific code to be called from
the common migration code to achieve this. This patch introduces load
and save methods for this purpose.
Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 'virtio: validate config_len on load' restricted config_len
loaded from the wire to match the config_len that the device had.
Unfortunately, there are cases where this isn't true, the one
we found it on was the wce addition in virtio-blk.
Allow mismatched config-lengths:
*) If the version on the wire is shorter then fine
*) If the version on the wire is longer, load what we have space
for and skip the rest.
(This is mst@redhat.com's rework of what I originally posted)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It's a loop from i < num_sg and the array is VIRTQUEUE_MAX_SIZE - so
it's OK if the value read is VIRTQUEUE_MAX_SIZE.
Not a big problem in practice as people don't use
such big queues, but it's inelegant.
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Malformed input can have config_len in migration stream
exceed the array size allocated on destination, the
result will be heap overflow.
To fix, that config_len matches on both sides.
CVE-2014-0182
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
--
v2: use %ix and %zx to print config_len values
Signed-off-by: Juan Quintela <quintela@redhat.com>
