Although it doesn't add all that much type safety (this is C, after
all), it does add a bit of legibility to use the name QCow2ClusterType
instead of a plain int.
In particular, qcow2_get_cluster_offset() has an overloaded return
type; a QCow2ClusterType on success, and -errno on failure; keeping
the cluster type in a separate variable makes it slightly easier for
the next patch to make further computations based on the type.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170507000552.20847-6-eblake@redhat.com
[mreitz: Use the new type in two more places (one of them pulled from
the next patch)]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Fix a couple of inconsistent indentations, before an upcoming
patch further tweaks the switch statements.
(best viewed with 'git diff -b').
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-3-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In order to keep checkpatch happy when the next patch changes
indentation, we first have to shorten some long lines. The easiest
approach is to use a new variable in place of
'offset & L2E_OFFSET_MASK', except that 'offset' is the best name
for that variable. Change '[old_]offset' to '[old_]entry' to
make room.
While touching things, also fix checkpatch warnings about unusual
'for' statements.
Suggested by Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170507000552.20847-2-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
For one thing, this allows us to drop the error message generation from
qemu-img.c and blockdev.c and instead have it unified in
bdrv_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-3-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The metadata overlap checks introduced in a40f1c2add help detect
corruption in the qcow2 image by verifying that data writes don't
overlap with existing metadata sections.
The 'refcount-block' check in particular iterates over the refcount
table in order to get the addresses of all refcount blocks and check
that none of them overlap with the region where we want to write.
The problem with the refcount table is that since it always occupies
complete clusters its size is usually very big. With the default
values of cluster_size=64KB and refcount_bits=16 this table holds 8192
entries, each one of them enough to map 2GB worth of host clusters.
So unless we're using images with several TB of allocated data this
table is going to be mostly empty, and iterating over it is a waste of
CPU. If the storage backend is fast enough this can have an effect on
I/O performance.
This patch keeps the index of the last used (i.e. non-zero) entry in
the refcount table and updates it every time the table changes. The
refcount-block overlap check then uses that index instead of reading
the whole table.
In my tests with a 4GB qcow2 file stored in RAM this doubles the
amount of write IOPS.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170201123828.4815-1-berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Another step towards byte-based interfaces everywhere. Replace
the sector-based bdrv_discard() with a new byte-based
bdrv_pdiscard(), which silently ignores any unaligned head
or tail.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-3-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't use the cpu_to_*w() functions, which we are trying to deprecate.
Instead either just use cpu_to_*() to do the byteswap, or use
st*_be_p() if we need to do the store somewhere other than to a
variable that's already the correct type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1466093177-17890-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).
This patch is the result of coccinelle script
scripts/coccinelle/round.cocci
CC: qemu-block@nongnu.org
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move it to the actual users. There are still a few includes of
qemu/bswap.h in headers; removing them is left for future work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a reference count is not representable with the current refcount
order, the image check should point to qemu-img amend for increasing the
refcount order. However, qemu-img amend needs write access to the image
which cannot be provided if the image is marked corrupt; and the image
check will not mark the image consistent unless everything actually is
consistent.
Therefore, if an image is marked corrupt and the image check encounters
a reference count overflow, it cannot be fixed by using qemu-img amend
to increase the refcount order. Instead, one has to use qemu-img convert
to create a completely new copy of the image in this case.
Alternatively, we may want to give the user a way of manually removing
the corrupt flag, maybe through qemu-img amend, but this is not part of
this patch.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a function qcow2_change_refcount_order() which allows changing the
refcount order of a qcow2 image.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This crash was caught with qemu-iotests test case 138.
Commit b6d36de already fixed a few 32 bit truncation bugs that could
cause qemu-img check to allocate too little memory and consequently
it would segfault. On 32 bit hosts, there is one more place that needs
to be fixed because size_t was involved in the calculation and is a
32 bit type there.
Cc: qemu-stable@nongnu.org
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
If we create a buffer directly on the stack by using 12 bytes, there's
no guarantee the 64bit value we want to swap will be aligned, which
could cause errors with undefined behavior.
Spotted with clang -fsanitize=undefined and observed in iotests 15, 26,
44, 115 and 121.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch removes the temporary duplication between bs->file and
bs->file_child by converting everything to BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
In case of -EAGAIN returned by update_refcount(), we should discard the
cluster offset we were trying to allocate and request a new one, because
in theory that old offset might now be taken by a refcount block.
In practice, this was not the case due to update_refcount() generally
returning strictly monotonic increasing cluster offsets. However, this
behavior is not set in stone, and it is also not obvious when looking at
qcow2_alloc_bytes() alone, so we should not rely on it.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sadly, some images may have more clusters than what can be represented
using a plain int. We should be prepared for that case (in
qcow2_check_refcounts() we actually were trying to catch that case, but
since size_to_clusters() truncated the returned value, that check never
did anything useful).
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BDRVQcowState is already used by qcow1, and gdb is always confused which
one to use. Rename the qcow2 one so they can be distinguished.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes a crash during image compression
Signed-off-by: Jindřich Makovička <makovick@gmail.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This function never receives an invalid table pointer, so we can make
it void and remove all the error checking code.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qcow2 L2/refcount cache contains one separate table for each cache
entry. Doing one allocation per table adds unnecessary overhead and it
also requires us to store the address of each table separately.
Since the size of the cache is constant during its lifetime, it's
better to have an array that contains all the tables using one single
allocation.
In my tests measuring freshly created caches with sizes 128MB (L2) and
32MB (refcount) this uses around 10MB of RAM less.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before a freed cluster can be reused, pending discards for this cluster
must be processed.
The original assumption was that this was not a problem because discards
are only cached during discard/write zeroes operations, which are
synchronous so that no concurrent write requests can cause cluster
allocations.
However, the discard/write zeroes operation itself can allocate a new L2
table (and it has to in order to put zero flags there), so make sure we
can cope with the situation.
This fixes https://bugs.launchpad.net/bugs/1349972.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This commit was generated mechanically by coccinelle from the following
semantic patch:
@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)
The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc). Therefore we
don't need to worry about the fact that ctz32(0) == 32.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When choosing a new place for the refcount table, alloc_refcount_block()
tries to infer the number of clusters used so far from its argument
cluster_index (which comes from the idea that if any cluster with an
index greater than cluster_index was in use, the refcount table would
have to be big enough already to describe cluster_index).
However, there is a cluster that may be at or after cluster_index, and
which is not covered by the refcount structures, and that is the new
refcount block new_block. Therefore, it should be taken into account for
the blocks_used calculation.
Also, because new_block already describes (or is intended to describe)
cluster_index, we may not put the new refcount structures there.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 1423598552-24301-2-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add helper functions for getting and setting refcounts in a refcount
array for any possible refcount order, and choose the correct one during
refcount initialization.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since refcounts do not always have to be a uint16_t, all refcount blocks
and arrays in memory should not have a specific type (thus they become
pointers to void) and for accessing them, two helper functions are used
(a getter and a setter). Those functions are called indirectly through
function pointers in the BDRVQcowState so they may later be exchanged
for different refcount orders.
With the check and repair functions using this function, the refcount
array they are creating will be in big endian byte order; additionally,
using realloc_refcount_array() makes the size of this refcount array
always cluster-aligned. Both combined allow rebuild_refcount_structure()
to drop the bounce buffer which was used to convert parts of the
refcount array to big endian byte order and store them on disk. Instead,
those parts can now be written directly.
[ kwolf: Fixed a build failure on 32 bit and another with old glib ]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a helper function for reallocating a refcount array, independent of
the refcount order. The newly allocated space is zeroed and the function
handles failed reallocations gracefully.
The helper function will always align the buffer size to a cluster
boundary; if storing the refcounts in such an array in big endian byte
order, this makes it possible to write parts of the array directly as
refcount blocks into the image file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Refcounts may have a width of up to 64 bits, so qemu should use the same
width to represent refcount values internally.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
update_refcount() and qcow2_update_cluster_refcount() currently take a
signed addend. At least one caller passes a value directly derived from
an absolute refcount that should be reached ("l2_refcount - 1" in
expand_zero_clusters_in_l1()). Therefore, the addend should be unsigned
as well; this will be especially important for 64 bit refcounts.
Because update_refcount() then no longer knows whether the refcount
should be increased or decreased, it now requires an additional flag
which specified exactly that. The same applies to
qcow2_update_cluster_refcount().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Refcounts can theoretically be of type uint64_t; in order to be able to
represent the full range, qcow2_get_refcount() cannot use a single
variable to represent both all refcount values and also keep some values
reserved for errors.
One solution would be to add an Error pointer parameter to
qcow2_get_refcount(); however, no caller could (currently) pass that
error message, so it would have to be emitted immediately and be
passed to the next caller by returning -EIO or something similar.
Therefore, an Error parameter does not offer any advantages here.
The solution applied by this patch is simpler to use. Because no caller
would be able to pass the error message, they would have to print it and
free it, whereas with this patch the caller only needs to pass the
returned integer (which is often a no-op from the code perspective,
because that integer will be stored in a variable "ret" which will be
returned by the fail path of many callers).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_update_cluster_refcount() does not have any quick access to the
new refcount value, it has to call qcow2_get_refcount(). Some callers do
not need that new value at all, others call qcow2_get_refcount()
themselves anyway (albeit in a different code path, which can however be
easily changed), therefore there is no advantage in making
qcow2_update_cluster_refcount() return the new value. Drop it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add two new fields regarding refcount information (the bit width of
every entry and the maximum refcount value) to the BDRVQcowState.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_alloc_bytes() is a function with insufficient error handling and
an unnecessary goto. This patch rewrites it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reading the refcount of a cluster is an operation which can be useful in
all of the qcow2 code, so make that function globally available.
While touching this function, amend the comment describing the "addend"
parameter: It is (no longer, if it ever was) necessary to have it set to
-1 or 1; any value is fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With BDRVQcowState.refcount_block_bits, we don't need REFCOUNT_SHIFT
anymore.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because the old refcount structure will be leaked after having rebuilt
it, we need to recalculate the refcounts and run a leak-fixing operation
afterwards (if leaks should be fixed at all).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous commit introduced the "rebuild" variable to qcow2's
implementation of the image consistency check. Now make use of this by
adding a function which creates a completely new refcount structure
based solely on the in-memory information gathered before.
The old refcount structure will be leaked, however. This leak will be
dealt with in a follow-up commit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a referenced cluster has a refcount of 0, increasing its refcount may
result in clusters being allocated for the refcount structures. This may
overwrite the referenced cluster, therefore we cannot simply increase
the refcount then.
In such cases, we can either try to replicate all the refcount
operations solely for the check operation, basing the allocations on the
in-memory refcount table; or we can simply rebuild the whole refcount
structure based on the in-memory refcount table. Since the latter will
be much easier, do that.
To prepare for this, introduce a "rebuild" boolean which should be set
to true whenever a fix is rather dangerous or too complicated using the
current refcount structures. Another example for this is refcount blocks
being referenced more than once.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the qcow2 check function detects a refcount block located beyond the
image end, grow the image appropriately. This cannot break anything and
is the logical fix for such a case.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We will later call calculate_refcounts multiple times, so reuse the
refcount table if possible.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the refcount table can be passed around by reference, do that
for inc_refcounts() (and subsequently check_refcounts_l1() and
check_refcounts_l2()) and use it for resizing it when a cluster after
the image end is encountered.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As of a future patch, inc_refcounts() will have to throw errors which
are generally signaled by returning -errno. Therefore, let it return an
integer which is either 0 for success or -errno and handle the -errno
case in all callers.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of printing out an error message, incrementing check_errors and
returning a fixed -errno, just do cleanups and return -ret, with ret set
by the code which threw the exception (jumped to the fail label).
Also, increment check_errors on error in check_refcounts_l2().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
