Add support for the RCC2 register on Fury class devices.
Based on a patch by Vijay Kumar.
Signed-off-by: Engin AYDOGAN <engin@bzzzt.biz>
[Peter Maydell: fixed comment typos, minor cleanup of unreachable code]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the PL061 to VMState. We choose to widen the struct members
to uint32_t rather than the other two options of breaking migration
compatibility or using vmstate hacks to read/write a 32 bit value
into an 8 bit struct field.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Versatile Express, Realview EB, PBX A9 and PB A8 boards all
use a PL111 for their graphics, not a PL110. Now we model the
PL111, use it on these board models.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On the Versatile PB, PL110 graphics adaptor only natively supports
5551 pixel format; an external mux swaps bits around to allow
RGB565 and BGR565, under the control of bits [1:0] in the SYS_CLCD
system register.
Implement these SYS_CLCD register bits, and use a gpio line to
feed them out of the system register model, across the versatilepb
board and into the pl110 so we can select the right format.
This is necessary as recent Linux versatile kernels default to
programming the CLCD and mux for 16 bit BGR rather than 16 bit RGB.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Model the PL111 CLCD controller. This is a minor variation
on the PL110; the major programmer visible differences are
support for hardware cursor (unimplemented) and two new
pixel formats.
Since syborg_fb.c borrows the pl11x pixel drawing routines,
we also update it to cope with the new slightly larger array
of function pointers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Other scsi_target_reqops commands were careful about not using r->cmd.xfer
directly, and instead always cap it to a fixed length. This was not done
for REQUEST SENSE, and this patch fixes it.
Reported-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't use req before it has been initialised in scsi_req_new().
This fixes a compile failure due to gcc complaining about this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Can be useful when debugging the device scan phase.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Unit attention conditions override any sense data the device already
has. Their signaling and clearing is handled entirely by the SCSIBus
code, and they are completely transparent to the SCSIDevices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Also introduce the first occurrence of "independent" SCSIReqOps,
to handle invalid commands in common code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will let SCSIBus detect requests sent to an invalid LUN, and
handle them itself. However, there will be still support for only one
LUN per target
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This struct is currently unnamed. Give it a name and use it
explicitly to decouple (some parts of) CDB parsing from
SCSIRequest.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Right now the CDB is not passed to the SCSIBus until scsi_req_enqueue.
Passing it to scsi_req_new will let scsi_req_new dispatch common requests
through different reqops.
Moving the memcpy to scsi_req_new is a hack that will go away as
soon as scsi_req_new will also take care of the parsing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will let allow requests to be dispatched through different callbacks,
either common or per-device.
This patch adjusts the API, the next one will move members to SCSIReqOps.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With this patch, sense data is stored in the generic data structures
for SCSI devices and requests. The SCSI layer takes care of storing
sense data in the SCSIDevice for the subsequent REQUEST SENSE command.
At the same time, get_sense is removed and scsi_req_get_sense can use
an entirely generic implementation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A small improvement in the SCSI request API. Pass the status
at the time the request is completed, so that we can assert that
no request is completed twice. This would have detected the
problem fixed in the previous patch.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vscsi supports autosensing by providing sense data directly in the
response. When get_sense was added, the older state machine approach
that sent REQUEST SENSE commands separately was left in place. Remove
it, all existing SCSIDevices do support autosensing and the next patches
will make the support come for free from the SCSIBus.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In fact, if the HBA's transfer_data callback goes on with scsi_req_continue
the request will be completed successfully instead of showing a failure.
It can even cause a segmentation fault.
An easy way to trigger it is "eject -f cd" during installation (during media
test if the installer does something like that).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We've always listened on port 501 for vgabios panic messages. In the entire
time I've worked on QEMU, I've never actually seen a vgabios panic message :-)
If we change the semantics of this port a little bit, it makes it possible to
use it for more interesting use-cases. I chose this approach instead of adding
a new I/O port because it avoids having a guest visible change.
This change allows single-byte access to port 501 and also uses the value
written to construct an exit code.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
