The two more or less overlap, because CONFIG_LINUX is a requirement for Linux
user-mode emulation. However, CONFIG_LINUX is technically a host symbol
that applies even to system emulation. Defining CONFIG_LINUX_USER, and
CONFIG_BSD_USER for eventual future use, is cleaner.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211210084836.25202-1-pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220105135009.1584676-20-alex.bennee@linaro.org>
Use $cpu instead of $ARCH, which has been removed from
the top-level configure.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes: 823eb01345 ("configure, meson: move ARCH to meson.build")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only difference between the two, as far as either configure or
Meson are concerned, is the default endianness of the compiler.
For tests/tcg, specify the endianness explicitly on the command line;
for configure, do the same so that it is possible to have --cpu=ppc64le
on a bigendian system or vice versa. Apart from this, cpu=ppc64le can
be normalized to ppc64 also in configure and not just in the meson
cross file.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we have a nios2 test image we can start using it to build tests.
However signal handling in nios2 is still broken so we disable the
signals and linux-test tests that trigger the bug.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211026102234.3961636-12-alex.bennee@linaro.org>
We do not want a shell command substitution, but a parameter
substitution (with assignment). Replace $() -> ${}, otherwise
the expanded command return an empty string and the $cross_cc
variable is not set.
Fixes: 634ef789f8 ("tests/tcg: add more default compilers to configure.sh")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: disable sh4 linux-test]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211023164329.328137-1-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211026102234.3961636-9-alex.bennee@linaro.org>
Up until this point we only handled local compilers or assumed we had
everything in the container. This falls down when we are building QEMU
inside the container.
This special handling only affects tricore for now but I put it in a
case just in case we add any other "special" targets. Setting
CROSS_CC_GUEST is a bit of a hack just to ensure the test runs as we
gate on a detected compiler even though the Makefile won't actually
use it. It also means we display something sane in the configure
output.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210720232703.10650-27-alex.bennee@linaro.org>
If you configure the host compiler with a multi-command stanza like:
--cc="ccache gcc"
then the configure.sh machinery falls over with confusion. Work around
this by ensuring we correctly quote so where we need a complete
evaluation we get it. Of course the has() check needs single variable
so we need to unquote that. This does mean it essentially checks that
just the ccache command exits but if we got past that step we still
check the compiler actually does something.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Message-Id: <20210527160319.19834-4-alex.bennee@linaro.org>
Currently there are two problems.
The first is clang generates a preamble (that is always executed) to
stack xmm registers. This causes a ILLOP on the x86_64 softmmu tests
as SSE isn't enabled.
The second is the inline assembler in test-i386.c breaks clangs
compiler and I don't know how to fix it. Even with Theodore's patch
series (D5741445-7EFD-4AF1-8DB2-E4AFA93CBB1A@icloud.com) I still get
compiler failures.
For now lets just skip clang and allow it to fall back to the
containers which we know have compilers which work.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-31-alex.bennee@linaro.org>
A newer compiler is needed to build tests for Power10 instructions. As
done for arm64 on c729a99d27, a new '-test-cross' image is created for
ppc64 and ppc64le. As done on 936fda4d77, a test for compiler support
is added to verify that the toolchain in use has '-mpower10'. Finally,
Unused images (docker-power-cross and docker-ppc64-cross) are removed.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210423205757.1752480-2-matheus.ferst@eldorado.org.br>
Message-Id: <20210512102051.12134-27-alex.bennee@linaro.org>
This kind of tests is inspired by the riscv-tests repository. This adds
macros that makes it easy to create single instruction self containing
tests.
It is achieved by macros that create a test sequence for an
instruction and check for a supplied correct value. If the value is correct the
next instruction is tested. Otherwise we jump to fail handler that writes is
test number as a status code back to qemu that then exits on that status code.
If all tests pass we write back 0 as a status code and exit.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20210305170045.869437-7-kbastian@mail.uni-paderborn.de>
[AJB: add container_hosts]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-17-alex.bennee@linaro.org>
At least for the TriCore target no easily available c compiler exists.
Thus we need to rely on "as" and "ld". This allows us to run them
through the docker image. We don't test the generation capabilities of
docker images as they are assumed to work.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
[AJB: fix quoting, only handle docker & clear, test -n, tweak commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-12-alex.bennee@linaro.org>
There should only be one compiler per architecture. Those cases where
the same compiler can deal with a different architecture should be
explicitly set for both cross_cc and docker configurations. Otherwise
you get strangeness like:
--cross-cc-aarch64=/bin/false
causing the logic to attempt to use a locally available
arm-linux-gnueabihf-gcc rather than forcing the use of the docker
image which is what is implied by the command line option.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-10-alex.bennee@linaro.org>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
The containerised compiler defaults to no-pie anyway but if we are
relying on the users installed cross compiler we need to check it
works for building 16 bit code first.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210401102530.12030-7-alex.bennee@linaro.org>
While it's hard to find cross compilers packaged for arches other than
x86_64 the same cannot be said for the x86_64 compiler which is
available on Debians i386, arm64 and ppc64el release architectures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-5-alex.bennee@linaro.org>
While docker is nominally multiarch these days it doesn't mean our
distros actually package all cross compilers for all architectures.
The upcoming Debian bullseye release will improve things further. At
least for now we can get things like the 32 bit ARM compiler on it's
64 bit cousin.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-4-alex.bennee@linaro.org>
You don't usually notice this is broken on developer system on x86 as
we use the normal host compiler. However on other systems the -pc was
extraneous. Also for 32 bit only i686 packages exist now so we should
use those when available.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210401102530.12030-2-alex.bennee@linaro.org>
The commit d03b174a83 (target/ppc: simplify bcdadd/sub functions)
meant to simplify some of the code but it inadvertently altered the
way the CR6 field is set after the operation has overflowed.
The CR6 bits are set based on the *unbounded* result of the operation,
so we need to look at the result before returning from bcd_add_mag,
otherwise we will look at 0 when it overflows.
Consider the following subtraction:
v0 = 0x9999999999999999999999999999999c (maximum positive BCD value)
v1 = 0x0000000000000000000000000000001d (negative one BCD value)
bcdsub. v0,v0,v1,0
The Power ISA 2.07B says:
If the unbounded result is greater than zero, do the following.
If PS=0, the sign code of the result is set to 0b1100.
If PS=1, the sign code of the result is set to 0b1111.
If the operation overflows, CR field 6 is set to 0b0101. Otherwise,
CR field 6 is set to 0b0100.
POWER9 hardware:
vr0 = 0x0000000000000000000000000000000c (positive zero BCD value)
cr6 = 0b0101 (0x5) (positive, overflow)
QEMU:
vr0 = 0x0000000000000000000000000000000c (positive zero BCD value)
cr6 = 0b0011 (0x3) (zero, overflow) <--- wrong
This patch reverts the part of d03b174a83 that introduced the
problem and adds a test-case to avoid further regressions:
before:
$ make run-tcg-tests-ppc64le-linux-user
(...)
TEST bcdsub on ppc64le
bcdsub: qemu/tests/tcg/ppc64le/bcdsub.c:58: test_bcdsub_gt:
Assertion `(cr >> 4) == ((1 << 2) | (1 << 0))' failed.
Fixes: d03b174a83 (target/ppc: simplify bcdadd/sub functions)
Reported-by: Paul Clarke <pc@us.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210222194035.2723056-1-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Blink and you miss the cross TCG compiler stuff so lets display it
with the rest of the compiler information.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210222101455.12640-2-alex.bennee@linaro.org>
Enable multiarch tests for Hexagon
Modify tests/tcg/configure.sh
Add reference files to tests/tcg/hexagon
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1612763186-18161-32-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The note test requires gcc 10 for -mbranch-protection=standard.
The mmap test uses PROT_BTI and does not require special compiler support.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 660f793093 was a bit overzealous
with respect to tests/tcg, which needed quiet-command and $(BUILD_DIR).
Reinstate quiet-command, and replace $(BUILD_DIR) with just the
current directory.
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not attempting to use a single cross-compiler for both
big-endian and little-endian at this time.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switch to the prebuilt xtensa toolchains release 2020.07.
Drop csp toolchain as the csp core is not a part of QEMU.
Add de233_fpu and dsp3400 toolchains to enable DFPU and FPU2000 tests.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: fix path in configure.sh]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200708082347.27318-1-jcmvbkbc@gmail.com>
Message-Id: <20200709141327.14631-13-alex.bennee@linaro.org>
We were missing a bunch of compilers which we could use if they were
locally installed. The defaults are based on Debian as they seem to be
the best distro for well distributed cross-build compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-32-alex.bennee@linaro.org>
As we enable newer features that we want to test on arm64 targets we
need newer compilers. Split off a new debian-arm64-test-cross image
which we can use to build these new tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-11-alex.bennee@linaro.org>
Although most people use the docker images this can trip up on
developer systems with actual valid cross-compilers!
Fixes: bb516dfc5b
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200225124710.14152-19-alex.bennee@linaro.org>
Otherwise we end up failing to build our tests on CI which may have
older compilers that the user expects. We can get rid of this once we
can fallback to multiarch containers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-14-alex.bennee@linaro.org>
We will need this for some tests later. The docker images already
support it by default.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200203090932.19147-13-alex.bennee@linaro.org>
Our docker infrastructure isn't quite as multiarch as we would wish so
lets allow the user to disable it if they want. This will allow us to
use still run check-tcg on non-x86 CI setups.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Now Buster is released we can unify our cross build images for both
QEMU and tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Avoid the repeated inclusions of config-target.mak, which have
risks of namespace pollution, and instead build minimal configuration
files in a configuration script. The same configuration files can
also be included in Makefile and Makefile.qemu
[AJB 10/09/19]
In the original PR this had inadvertently enabled tests
for ppc64abi32. However as the rest of the multiarch tests work rather
than disabling the otherwise correctly functioning build I've just
skipped the failing linux-test test. For some reason I can't debug it
with TCG so I'm leaving that to the PPC maintainers to look at.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-4-pbonzini@redhat.com>
[AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
