After a short-not-ok packet ending short, we should not advance the queue.
Move enforcing this to the core, rather then handling it in the hcd code.
This may result in the queue now actually containing multiple input packets
(which would not happen before), and this requires special handling in
combination with pipelining, so disable pipleining for input endpoints
(for now).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
hcds which queue up more then one packet at once (uhci, ehci and xhci),
must clear the queue after an error which has caused the queue to halt.
Currently this is handled as a special case inside the hcd code, this
patch instead adds an USB_RET_REMOVE_FROM_QUEUE packet result code, teaches
the 3 hcds about this and moves the clearing of the queue on a halt into
the USB core.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This can be used by usb-device code which wishes to process an entire endpoint
queue at once, to do this the usb-device code returns USB_RET_ADD_TO_QUEUE
from its handle_data class method and defines a flush_ep_queue class method
to call when the hcd is done queuing up packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for building superspeed endpoint companion descriptors,
create them for superspeed usb devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds IDs to usb packets. Those IDs are (a) supposed to be
unique for the lifecycle of a packet (from packet setup until the packet
is either completed or canceled) and (b) stable across migration.
uhci, ohci, ehci and xhci use the guest physical address of the transfer
descriptor for this.
musb needs a different approach because there is no transfer descriptor.
But musb also doesn't support pipelining, so we have never more than one
packet per endpoint in flight. So we go create an ID based on endpoint
and device address.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For controllers which queue up more then 1 packet at a time, we must halt the
ep queue, and inside the controller code cancel all pending packets on an
error.
There are multiple reasons for this:
1) Guests expect the controllers to halt ep queues on error, so that they
get the opportunity to cancel transfers which the scheduled after the failing
one, before processing continues
2) Not cancelling queued up packets after a failed transfer also messes up
the controller state machine, in the case of EHCI causing the following
assert to trigger: "assert(p->qtdaddr == q->qtdaddr)" at hcd-ehci.c:2075
3) For bulk endpoints with pipelining enabled (redirection to a real USB
device), we must cancel all the transfers after this a failed one so that:
a) If they've completed already, they are not processed further causing more
stalls to be reported, originating from the same failed transfer
b) If still in flight, they are cancelled before the guest does
a clear stall, otherwise the guest and device can loose sync!
Note this patch only touches the ehci and uhci controller changes, since AFAIK
no other controllers actually queue up multiple transfer. If I'm wrong on this
other controllers need to be updated too!
Also note that this patch was heavily tested with the ehci code, where I had
a reproducer for a device causing a transfer to fail. The uhci code is not
tested with actually failing transfers and could do with a thorough review!
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This stuff doesn't belong to block layer, and was put there only
because a better home didn't exist then. Now it does.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Create a new usb_ep_reset() function to reset endpoint state, without
re-initialiting the queues, so we don't unlink in-flight packets just
because usb-host has to re-parse the descriptor tables.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The USB UHCI and EHCI drivers were converted some time ago to use the
pci_dma_*() helper functions. However, this conversion was not complete
because in some places both these drivers do DMA via the usb_packet_map()
function in usb-libhw.c. That function directly used
cpu_physical_memory_map().
Now that the sglist code uses DMA wrappers properly, we can convert the
functions in usb-libhw.c, thus conpleting the conversion of UHCI and EHCI
to use the DMA wrappers.
Note that usb_packet_map() invokes dma_memory_map() with a NULL invalidate
callback function. When IOMMU support is added, this will mean that
usb_packet_map() and the corresponding usb_packet_unmap() must be called in
close proximity without dropping the qemu device lock - otherwise the guest
might invalidate IOMMU mappings while they are still in use by the device
code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is far less interesting than it sounds. We simply add an Object to each
BusState and then register the types appropriately. Most of the interesting
refactoring will follow in the next patches.
Since we're changing fundamental type names (BusInfo -> BusClass), it all needs
to convert at once. Fortunately, not a lot of code is affected.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Made all new bus TypeInfos static const.]
[AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated]
Signed-off-by: Andreas Färber <afaerber@suse.de>
... to make vmstate id string truely unique with multiple host
controllers, i.e. move from "1/usb-ptr" to "0000:00:01.3/1/usb-ptr"
(usb tabled connected to piix3 uhci).
This obviously breaks migration. To handle this the usb bus
property "full-path" is added. When setting this to false old
behavior is maintained. This way current qemu will be compatible
with old versions when started using '-M pc-$oldversion'.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new function to check whenever the packet state is as expected,
log more informations in case it isn't.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a more direct code path to submit control transfers. Instead of
feeding three usb packets (setup, data, ack) to usb_handle_packet and
have the do_token_* functions in usb.c poke the control transfer
parameters out of it just submit a single packet carrying the actual
data with the control xfer parameters filled into USBPacket->parameters.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With this patch applied USB drivers can enable pipelining per endpoint.
With pipelining enabled the usb core will continue submitting packets
even when there are still async transfers in flight instead of passing
them on one by one.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We already have USB_RET_NAK, but that means that a device does not want
to send/receive right now. But with host / network redirection we can
actually have a transaction fail due to some io error, rather then ie
the device just not having any data atm.
This patch adds a new error code named USB_RET_IOERROR for this, and uses
it were appropriate.
Notes:
-Currently all usb-controllers handle this the same as NODEV, but that
may change in the future, OHCI could indicate a CRC error instead for example.
-This patch does not touch hw/usb-musb.c, that is because the code in there
handles STALL and NAK specially and has a if status < 0 generic catch all
for all other errors
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When creating an USB device the old way, there is no way to specify the
target bus. Thus the warning issued by usb_create makes no sense and
rather confuses our users.
Resolve this by passing a bus reference to the usbdevice_init handler
and letting those handlers forward it to usb_create.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add usb bus op which is called whenever a usb endpoint becomes ready,
so the host adapter emulation can react on that event.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Devices must specify which endpoint has data to transfer now.
The plan is to use the usb_wakeup() not only for remove wakeup support,
but for "data ready" signaling in general, so we can move away from
constant polling to event driven usb device emulation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Maintain a list of async packets per endpoint. With the current code
the list will never receive more than a single item. I think you can
guess what the future plan is though ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the separation of the device lookup (via usb_find_device) and
packet processing we can lookup device and endpoint before setting up
the usb packet. So we can initialize USBPacket->ep early and keep it
valid for the whole lifecycle of the USBPacket. Also the devaddr and
devep fields are not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a "nr" and "pid" fields to USBEndpoint so you can easily figure the
endpoint number and direction of any given endpoint.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add enum to track the status of USBPackets, use that instead of the
owner pointer to figure whenever a usb packet is currently in flight
or not. Add some more packet status sanity checks. Also rename the
USBEndpoint pointer from "owner" to "ep".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All drivers except usb-hub use usb_generic_handle_packet. The only
reason the usb hub has its own function is that it used to be called
with packets which are intended for downstream devices. With the new,
separate device lookup step this doesn't happen any more, so the need
for a different handle_packet callback is gone.
So we can kill the handle_packet callback and just call
usb_generic_handle_packet directly. The special hub handling in
usb_handle_packet() can go away for the same reason.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add usb_find_device(). This function will check whenever a device with
a specific address is connected to the specified port. Usually this
will just check state and address of the device hooked up to the port,
but in case of a hub it will ask the hub to check all hub ports for a
matching device.
This patch doesn't put the code into use yet, see the following patches
for details.
The master plan is to separate device lookup and packet processing.
Right now the usb code simply walks all devices, calls
usb_handle_packet() on each until one accepts the packet (by returning
something different that USB_RET_NODEV). I want to have a device lookup
first, then call usb_handle_packet() once, for the device which actually
processes the packet.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The USB subsystem pipes internal reset notifications through
usb_handle_packet() with a special magic PID. This indirection
is a pretty pointless excercise as it ends up being handled by
usb_generic_handle_packet anyway.
Replace the USB_MSG_RESET with a usb_device_reset() function
which can be called directly. Also rename the existing usb_reset()
function to usb_port_reset() to avoid confusion.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The USB subsystem pipes internal attach/detach notifications through
usb_handle_packet() with a special magic PID. This indirection is a
pretty pointless excercise as it ends up being handled by
usb_generic_handle_packet anyway. Remove it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.
The first step was a sed-based addition of the parent type to the subclass
registration functions.
The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.
Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.
We are almost fully converted to QOM after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kraxel/usb.37:
usb-redir: Improve some debugging messages
usb-redir: Try to keep our buffer size near the target size
usb-redir: Pre-fill our isoc input buffer before sending pkts to the host
usb-redir: Dynamically adjust iso buffering size based on ep interval
usb-redir: Clear iso / irq error when stopping the stream
usb: link packets to endpoints not devices
usb: add max_packet_size to USBEndpoint
usb/debug: add usb_ep_dump
usb-desc: USBEndpoint support
usb: add ifnum to USBEndpoint
usb: add USBEndpoint
xhci: Initial xHCI implementation
usb: add audio device model
usb-desc: audio endpoint support
usb: track altsetting in USBDevice
usb: track configuration and interface count in USBDevice.
usb-host: rip out legacy procfs support
Add USBEndpoint for the control endpoint to USBDevices. Link async
packets to the USBEndpoint instead of the USBDevice.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Start maintaining endpoint state at USBDevice level. Add USBEndpoint
struct and some helper functions to deal with it. For now it contains
the endpoint type only. Moved over some bits from usb-linux.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This brings a usb audio device to qemu. Output only, fixed at
16bit stereo @ 480000 Hz. Based on a patch from
H. Peter Anvin <hpa@linux.intel.com>
Usage: add '-device usb-audio' to your qemu command line.
Works sorta ok on a idle machine. Known issues:
* Is *very* sensitive to latencies.
* Burns quite some CPU due to usb polling.
In short: It brings the qemu usb emulation to its limits. Enjoy!
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move fields from USBHostDevice to USBDevice.
Add bits to usb-desc.c to fill them for emulated devices too.
Also allow to set configuration 0 (== None) for emulated devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 891fb2cd45 removed the implicit
detach before (re-)attaching in usb_attach(). Some usb host controllers
used that behavior though to do a port reset by a detach+attach
sequence.
This patch establishes old behavior by adding a new usb_reset() function
for port resets and putting it into use, thereby also unifying port
reset behavior of all host controllers. The patch also adds asserts to
usb_attach() and usb_detach() to make sure the calls are symmetrical.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a separate reset function musb_reset() to the usb-musb interface,
so that users who implement a reset function can also reset usb-musb.
Use this in tusb6010.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Initialise usb-musb by passing it a DeviceState* and the offset of the
IRQs in its gpio array, rather than a plain pointer to an irq array.
This is simpler for callers and also allows us to pass in a valid parent
to usb_bus_new(), so the USB bus actually appears in the qdev tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Identifiers with double leading underscore are reserved, so rename
__musb_irq_max so we don't encroach on reserved namespace.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch makes qemu assign a port when creating the device, not when
attaching it. For most usb devices this isn't a noticable difference
because they are in attached state all the time.
The change affects usb-host devices which live in detached state while
the real device is unplugged from the host. They have a fixed port
assigned all the time now instead of getting grabbing one on attach and
releasing it at detach, i.e. they stop floating around at the usb bus.
The change also allows to simplify usb-hub. It doesn't need the
handle_attach() callback any more to configure the downstream ports.
This can be done at device initialitation time now. The changed
initialization order (first grab upstream port, then register downstream
ports) also fixes some icky corner cases. For example it is not possible
any more to plug the hub into one of its own downstream ports.
The usb host adapters must care too. USBPort->dev being non-NULL
doesn't imply any more the device is in attached state. The host
adapters must additionally check the USBPort->dev->attached flag.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
