With arm32, the ABI gives us 8-byte alignment for the stack.
While it's possible to realign the stack to provide 16-byte alignment,
it's far easier to simply not encode 16-byte alignment in the
VLD1 and VST1 instructions that we emit.
Remove the assertion in temp_allocate_frame, limit natural alignment
to the provided stack alignment, and add a comment.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1999878
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210912174925.200132-1-richard.henderson@linaro.org>
Message-Id: <20211206191335.230683-2-richard.henderson@linaro.org>
Newly defined tcg_out_vec_op (34ef767609 tcg/s390x: Add host vector framework)
for s390x uses pointer argument definition.
This fails on gcc 11 as original declaration uses array argument:
In file included from ../tcg/tcg.c:430:
/builddir/build/BUILD/qemu-6.1.50/tcg/s390x/tcg-target.c.inc:2702:42: error: argument 5 of type 'const TCGArg *' {aka 'const long unsigned int *'} declared as a pointer [-Werror=array-parameter=]
2702 | const TCGArg *args, const int *const_args)
| ~~~~~~~~~~~~~~^~~~
../tcg/tcg.c:121:41: note: previously declared as an array 'const TCGArg[16]' {aka 'const long unsigned int[16]'}
121 | const TCGArg args[TCG_MAX_OP_ARGS],
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
In file included from ../tcg/tcg.c:430:
/builddir/build/BUILD/qemu-6.1.50/tcg/s390x/tcg-target.c.inc:2702:59: error: argument 6 of type 'const int *' declared as a pointer [-Werror=array-parameter=]
2702 | const TCGArg *args, const int *const_args)
| ~~~~~~~~~~~^~~~~~~~~~
../tcg/tcg.c:122:38: note: previously declared as an array 'const int[16]'
122 | const int const_args[TCG_MAX_OP_ARGS]);
| ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixing argument type to pass build.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211027085629.240704-1-mrezanin@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no bug, but silence a warning about computation
in int32_t being assigned to a uint64_t.
Reported-by: Coverity CID 1465220
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a counterpart to the HMP "info opcount" command. It is being
added with an "x-" prefix because this QMP command is intended as an
ad hoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info jit" command. It is being
added with an "x-" prefix because this QMP command is intended as an
ad hoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For constant shifts, we can simply shift the s_mask.
For variable shifts, we know that sar does not reduce
the s_mask, which helps for sequences like
ext32s_i64 t, in
sar_i64 t, t, v
ext32s_i64 out, t
allowing the final extend to be eliminated.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The results are generally 6 bit unsigned values, though
the count leading and trailing bits may produce any value
for a zero input.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The result is either 0 or 1, which means that we have
a 2 bit signed result, and thus 62 bits of sign.
For clarity, use the smask_from_zmask function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Sign repetitions are perforce all identical, whether they are 1 or 0.
Bitwise operations preserve the relative quantity of the repetitions.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Certain targets, like riscv, produce signed 32-bit results.
This can lead to lots of redundant extensions as values are
manipulated.
Begin by tracking only the obvious sign-extensions, and
converting them to simple copies when possible.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recognize the constant function for remainder.
Suggested-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recognize the identity function for division.
Suggested-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recognize the identity function for low-part multiply.
Suggested-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recognize the constant function for or-complement.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This "garbage" setting pre-dates the addition of the type
changing opcodes INDEX_op_ext_i32_i64, INDEX_op_extu_i32_i64,
and INDEX_op_extr{l,h}_i64_i32.
So now we have a definitive points at which to adjust z_mask
to eliminate such bits from the 32-bit operands.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pretending that the source is i64 when it is in fact i32 is
incorrect; we have type-changing opcodes that must be used.
This bug trips up the subsequent change to the optimizer.
Fixes: 4f2331e5b6
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most of these are handled by creating a fold_const2_commutative
to handle all of the binary operators. The rest were already
handled on a case-by-case basis in the switch, and have their
own fold function in which to place the call.
We now have only one major switch on TCGOpcode.
Introduce NO_DEST and a block comment for swap_commutative in
order to make the handling of brcond and movcond opcodes cleaner.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to fold_addsub2.
Use Int128 to implement the wider operation.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to fold_multiply2, and handle muls2_i32, mulu2_i64,
and muls2_i64.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move all of the known-zero optimizations into the per-opcode
functions. Use fold_masks when there is a possibility of the
result being determined, and simply set ctx->z_mask otherwise.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull the "op r, 0, b => movi r, 0" optimization into a function,
and use it in fold_shift.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull the "op r, a, i => mov r, a" optimization into a function,
and use them in the outer-most logical operations.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Even though there is only one user, place this more complex
conversion into its own helper.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the conditional conversion from a more complex logical
operation to a simple NOT. Create a couple more helpers to make
this easy for the outer-most logical operations.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Compute the type of the operation early.
There are at least 4 places that used a def->flags ladder
to determine the type of the operation being optimized.
There were two places that assumed !TCG_OPF_64BIT means
TCG_TYPE_I32, and so could potentially compute incorrect
results for vector operations.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull the "op r, a, 0 => movi r, 0" optimization into a function,
and use it in the outer opcode fold functions.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull the "op r, a, a => mov r, a" optimization into a function,
and use it in the outer opcode fold functions.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull the "op r, a, a => movi r, 0" optimization into a function,
and use it in the outer opcode fold functions.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is the final entry in the main switch that was in a
different form. After this, we have the option to convert
the switch into a function dispatch table.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add two additional helpers, fold_add2_i32 and fold_sub2_i32
which will not be simple wrappers forever.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce some code duplication by folding the NE and EQ cases.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce some code duplication by folding the NE and EQ cases.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out a whole bunch of placeholder functions, which are
currently identical. That won't last as more code gets moved.
Use CASE_32_64_VEC for some logical operators that previously
missed the addition of vectors.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This puts the separate mb optimization into the same framework
as the others. While fold_qemu_{ld,st} are currently identical,
that won't last as more code gets moved.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Copy z_mask into OptContext, for writeback to the
first output within the new function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will allow callers to tail call to these functions
and return true indicating processing complete.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Return -1 instead of 2 for failure, so that we can
use comparisons against 0 for all cases.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than try to keep these up-to-date across folding,
re-read nb_oargs at the end, after re-reading the opcode.
A couple of asserts need dropping, but that will take care
of itself as we split the function further.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Calls are special in that they have a variable number
of arguments, and need to be able to clobber globals.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Continue splitting tcg_optimize.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There was no real reason for calls to have separate code here.
Unify init for calls vs non-calls using the call path, which
handles TCG_CALL_DUMMY_ARG.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will expose the variable to subroutines that
will be broken out of tcg_optimize.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Adjust the interface to take the OptContext parameter instead
of TCGContext or both.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Break the final cleanup clause out of the main switch
statement. When fully folding an opcode to mov/movi,
use "continue" to process the next opcode, else break
to fall into the final cleanup.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Provide what will become a larger context for splitting
the very large tcg_optimize function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prepare for tracking different masks by renaming this one.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Having observed e.g. al8+leq in dumps, canonicalize to al+leq.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These functions have been replaced by cpu_*_mmu as the
most proper interface to use from target code.
Hide these declarations from code that should not use them.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The unsigned saturations are handled via generic code
using min/max. The signed saturations are expanded using
double-sized arithmetic and a saturating pack.
Since all operations are done via expansion, do not
actually set TCG_TARGET_HAS_sat_vec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These logical and arithmetic operations are optional but trivial.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implementing add, sub, and, or, xor as the minimal set.
This allows us to actually enable vectors in query_s390_facilities.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add registers and function stubs. The functionality
is disabled via squashing s390_facilities[2] to 0.
We must still include results for the mandatory opcodes in
tcg_target_op_def, as all opcodes are checked during tcg init.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
They are rightly values in the same enumeration.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly need to be able to check facilities beyond the
first 64. Instead of explicitly masking against s390_facilities,
create a HAVE_FACILITY macro that indexes an array.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Change name to HAVE_FACILITY (david)
This emphasizes that we don't support s390, only 64-bit s390x hosts.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For usadd, we only have to consider overflow. Since ~B + B == -1,
the maximum value for A that saturates is ~B.
For ussub, we only have to consider underflow. The minimum value
that saturates to 0 from A - B is B.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no point in encoding load/store within a bit of
the memory trace info operand. Represent atomic operations
as a single read-modify-write tracepoint. Use MemOpIdx
instead of inventing a form specifically for traces.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the MemOpIdx directly, rather than the rearrangement
of the same bits currently done by the trace infrastructure.
Pass in enum qemu_plugin_mem_rw so that we are able to treat
read-modify-write operations as a single operation.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We (will) often have the complete MemOpIdx handy, so use that.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to move this out of tcg.h, so rename it
as we did when moving MemOp.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have lacked expressive support for memory sizes larger
than 64-bits for a while. Fixing that requires adjustment
to several points where we used this for array indexing,
and two places that develop -Wswitch warnings after the change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This version of tcg_out_mov is emits a nop to fill the
delay slot if the move is not required.
The only current use, for INDEX_op_goto_ptr, will always
require the move but properly documents the delay slot.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let the compiler decide about inlining.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Only use indirect jumps. Finish weaning away from the
unique alignment requirements for code_gen_buffer.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Weaning off of unique alignment requirements, so allow JAL
to not reach the target. TCG_TMP1 is always available for
use as a scratch because it is clobbered by the subroutine
being called.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let the compiler decide about inlining.
Remove tcg_out_ext8s and tcg_out_ext16s as unused.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let the compiler decide about inlining.
Remove tcg_out_nop as unused.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have already computed the rotated value of the imm8
portion of the complete imm12 encoding. No sense leaving
the combination of rot + rotation to the caller.
Create an encode_imm12_nofail helper that performs an assert.
This removes the final use of the local "rotl" function,
which duplicated our generic "rol32" function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand these hard-coded instructions symbolically.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ARMv4T has BX as its only interworking instruction. In order
to support testing of different architecture revisions with a
qemu binary that may have been built for, say ARMv6T2, fill in
the blank required to make calls to helpers in thumb mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
According to the Arm ARM DDI 0406C, section A1.3, the valid variants
are ARMv5T, ARMv5TE, ARMv5TEJ -- there is no ARMv5 without Thumb.
Therefore simplify the test from preprocessor ifdefs to base
architecture revision. Retain the "t" in the name to minimize churn.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Some of the functions specified _reg, some _imm, and some
left it blank. Make it clearer to which we are referring.
Split tcg_out_b_reg from tcg_out_bx_reg, to indicate when
we do not actually require BX semantics.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GCC since 4.8 provides the definition and we now require 7.5.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 5e8892db93 fixed several function signatures but tcg_out_vec_op
for arm is missing. It causes a build error on armv6 and armv7:
tcg-target.c.inc:2718:42: error: argument 5 of type 'const TCGArg *'
{aka 'const unsigned int *'} declared as a pointer [-Werror=array-parameter=]
const TCGArg *args, const int *const_args)
~~~~~~~~~~~~~~^~~~
../tcg/tcg.c:120:41: note: previously declared as an array 'const TCGArg[16]'
{aka 'const unsigned int[16]'}
const TCGArg args[TCG_MAX_OP_ARGS],
~~~~~~~~~~~~~~^~~~
Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210908185338.7927-1-jziviani@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Clang only sets _CALL_ELF for ppc64, and nothing at all to specify
the ABI for ppc32. Make a good guess based on other symbols.
Reported-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If __APPLE__, ensure that _CALL_DARWIN is set, then remove
our local TCG_TARGET_CALL_DARWIN.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We need to be able to represent VEX.W on a 32-bit host, where REX.W
will always be zero. Fixes the encoding for VPSLLVQ and VPSRLVQ.
Fixes: a2ce146a06 ("tcg/i386: Support vector variable shift opcodes")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/385
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the -d nochain check to bits on tb->cflags.
These will be used for more than -d nochain shortly.
Set bits during curr_cflags, test them in translator_use_goto_tb,
assert we're not doing anything odd in tcg_gen_goto_tb. The test
in tcg_gen_exit_tb is redundant with the assert for goto_tb_issue_mask.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210717221851.2124573-4-richard.henderson@linaro.org>
Reduce the amount of code duplication by always passing
the TCGMemOpIdx argument to helper_atomic_*. This is not
currently used for user-only, but it's easy to ignore.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 6eea04347e, all tcg backends support goto_ptr.
Remove the conditional, making support mandatory.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In tcg_region_prologue_set, we reset TCGContext.code_gen_ptr.
So do that after we've used it to dump the prologue contents.
Fixes: b0a0794a0f
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can call do_tb_phys_invalidate from an iocontext, which has
no per-thread tcg_ctx. Move this to tb_ctx, which is global.
The actual update still takes place with a lock held, so only
an atomic set is required, not an atomic increment.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/457
Tested-by: Viktor Ashirov <vashirov@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function is called only at tcg_gen_code() when duplicated TBs
are translated by different threads, and when the tcg_region_tree
is reset. Bake it into the underlying GTree as its value destroy
function to unite these situations.
Also remove tcg_region_tree_traverse() which now becomes useless.
Signed-off-by: Liren Wei <lrwei@bupt.edu.cn>
Message-Id: <8dc352f08d038c4e7a1f5f56962398cdc700c3aa.1625404483.git.lrwei@bupt.edu.cn>
[rth: Name the new tb_tc_cmp parameter correctly.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We lost the ',' following the called function name.
Fixes: 3e92aa3443
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCG_TARGET_HAS_MEMORY_BSWAP is already unset for this backend,
which means that MO_BSWAP be handled by the middle-end and
will never be seen by the backend. Thus the indexes used with
qemu_{ld,st}_helpers will always be zero.
Tidy the comments and asserts in tcg_out_qemu_{ld,st}_direct.
It is not that we do not handle bswap "yet", but never will.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory bswap support in the aarch64 backend merely dates from
a time when it was required. There is nothing special about the
backend support that could not have been provided by the middle-end
even prior to the introduction of the bswap flags.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that the middle-end can replicate the same tricks as tcg/arm
used for optimizing bswap for signed loads and for stores, do not
pretend to have these memory ops in the backend.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By removing TCG_BSWAP_IZ we indicate that the input is
not zero-extended, and thus can remove an explicit extend.
By removing TCG_BSWAP_OZ, we allow the implementation to
leave high bits set, which will be ignored by the store.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can perform any required sign-extension via TCG_BSWAP_OS.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the new semantics in the fallback expansion.
Change all callers to supply the flags that keep the
semantics unchanged locally.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Notice when the input is known to be zero-extended and force
the TCG_BSWAP_IZ flag on. Honor the TCG_BSWAP_OS bit during
constant folding. Propagate the input to the output mask.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The existing interpreter zero-extends, ignoring high bits.
Simply add a separate sign-extension opcode if required.
Ensure that the interpreter supports ext16s when bswap16 is enabled.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_bswap32 and tcg_out_bswap32s.
Use the flags in the internal uses for loads and stores.
For mips32r2 bswap32 with zero-extension, standardize on
WSBH+ROTR+DEXT. This is the same number of insns as the
previous DSBH+DSHD+DSRL but fits in better with the flags check.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_bswap16 and tcg_out_bswap16s. Use the flags
in the internal uses for loads and stores.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For INDEX_op_bswap16_i64, use 64-bit instructions so that we can
easily provide the extension to 64-bits. Drop the special case,
previously used, where the input is already zero-extended -- the
minor code size savings is not worth the complication.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For INDEX_op_bswap32_i32, pass 0 for flags: input not zero-extended,
output does not need extension within the host 64-bit register.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the use of a suitable temporary, we can use the same
algorithm when src overlaps dst. The result is the same
number of instructions either way.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly require sari in other context;
split out both for cleanliness sake.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly require these in other context;
make the expansion as clear as possible.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Combine the three bswap16 routines, and differentiate via the flags.
Use the correct flags combination from the load/store routines, and
pass along the constant parameter from tcg_out_op.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass in the input and output size. We currently use 3 of the 5
possible combinations; the others may be used by new tcg opcodes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Retain the current rorw bswap16 expansion for the zero-in/zero-out case.
Otherwise, perform a wider bswap plus a right-shift or extend.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will eventually simplify front-end usage, and will allow
backends to unset TCG_TARGET_HAS_MEMORY_BSWAP without loss of
optimization.
The argument is added during expansion, not currently exposed to the
front end translators. The backends currently only support a flags
value of either TCG_BSWAP_IZ, or (TCG_BSWAP_IZ | TCG_BSWAP_OZ),
since they all require zero top bytes and leave them that way.
At the existing call sites we pass in (TCG_BSWAP_IZ | TCG_BSWAP_OZ),
except for the flags-ignored cases of a 32-bit swap of a 32-bit
value and or a 64-bit swap of a 64-bit value, where we pass 0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Arm MVE VDUP implementation would like to be able to emit code to
duplicate a byte or halfword value into an i32. We have code to do
this already in tcg-op-gvec.c, so all we need to do is make the
functions global.
For consistency with other functions made available to the frontends:
* we rename to tcg_gen_dup_*
* we expose both the _i32 and _i64 forms
* we provide the #define for a _tl form
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210617121628.20116-10-peter.maydell@linaro.org
Assume that we'll have fewer temps allocated after
restarting with a fewer number of instructions.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function should have been updated for vector types
when they were introduced.
Fixes: d2fd745fe8
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/367
Cc: qemu-stable@nongnu.org
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should not be aligning the offset in temp_allocate_frame,
because the odd offset produces an aligned address in the end.
Instead, pass the logical offset into tcg_set_frame and add
the stack bias last.
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wrap guest memory operations for tci like we do for cpu_ld*_data.
We cannot actually use the cpu_ldst.h interface without duplicating
the memory trace operations performed within, which will already
have been expanded into the tcg opcode stream.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These macros are only used in one place. By expanding,
we get to apply some common-subexpression elimination
and create some local variables.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This reverts commit dc09f047ed.
For tcg, tracepoints are expanded inline in tcg opcodes.
Using a helper which generates a second tracepoint is incorrect.
For system mode, the extraction and re-packing of MemOp and mmu_idx
lost the alignment information from MemOp. So we were no longer
raising alignment exceptions for !TARGET_ALIGNED_ONLY guests.
This can be seen in tests/tcg/xtensa/test_load_store.S.
For user mode, we must update to the new signature of g2h() so that
the revert compiles. We can leave set_helper_retaddr for later.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can share this code between 32-bit and 64-bit loads and stores.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already had the 32-bit versions for a 32-bit host; expand this
to 64-bit hosts as well. The 64-bit opcodes are new.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already had mulu2_i32 for a 32-bit host; expand this to 64-bit
hosts as well. The muls2_i32 and the 64-bit opcodes are new.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>