Commit Graph

928 Commits

Author SHA1 Message Date
Lena Djokic
fea243e90a linux-user: Fix inotify_init1 support
This commit adds necessary conversion of argument passed to inotify_init1.
inotify_init1 flags can be IN_NONBLOCK and IN_CLOEXEC which rely on O_NONBLOCK
and O_CLOEXEC and those can have different values on different platforms.

Signed-off-by: Lena Djokic <Lena.Djokic@rt-rk.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2017-02-14 17:18:03 +01:00
Laurent Vivier
40493c5f2b linux-user: fix "apt-get update" on linux-user hppa
apt-get was hanging on linux-user hppa.

strace has shown the netlink data stream was not correctly byte swapped.

It appears the fd translator function is unregistered just after it
has been registered, so the translator function is not called.

This patch removes the fd_trans_unregister() after the do_socket()
in the TARGET_NR_socket case.

This fd_trans_unregister() was added by commit
    e36800c linux-user: add signalfd/signalfd4 syscalls
when do_socket() was not registering any fd translator.
And as now it is, we must remove this fd_trans_unregister() to keep them.

Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Message-Id: <20170126080449.28255-3-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-06 18:24:39 -08:00
Richard Henderson
fe8ed7d579 linux-user: Handle ERFKILL and EHWPOISON
With definitions for generic, alpha and mips taken from 4.9-rc2.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-22 18:14:10 -08:00
Helge Deller
8cb762fe01 linux-user: Handle TIOCSTART and TIOCSTOP
Some architectures (ppc, alpha, sparc, parisc, sh and xtensa) define the
BSD TIOCSTART and TIOCSTOP ioctls in their kernel headers to provide
compatibility to other operating systems.

Those ioctls are not implemented in Linux, nevertheless, bash will use
this ioctl if it's available on those architectures.

To avoid false warnings, add code to simply ignore those ioctls.

Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20161206152403.GA6651@ls3530>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-22 18:14:10 -08:00
Alex Bennée
b67cb68ba5 linux-user: enable parallel code generation on clone
The variable parallel_cpus controls the generation of thread aware
atomic code.  We only need to set it once we clone our first thread.
At this point any existing translations need to be thrown away.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-10-26 08:29:00 -07:00
Dejan Jovicevic
f8d00fba27 linux-user: added support for pwritev() system call.
This system call performs the same task as the writev() system call,
with the exception of having the fourth argument, offset, which
specifes the file offset at which the input operation is to be performed.
Because of this, the pwritev() implementation is based on the writev()
implementation in linux-user mode.

But, since pwritev() is implemented in the kernel as a 5-argument syscall,
5 arguments are needed to be handled as input and passed to the host
syscall.

The pos_l and pos_h argument of the safe_pwritev() are of type unsigned
long, which can be of different sizes on different platforms. The input
arguments are converted to the appropriate host size when passed to
safe_pwritev().

Signed-off-by: Dejan Jovicevic <dejan.jovicevic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:20:13 +03:00
Dejan Jovicevic
0f26386c27 linux-user: added support for preadv() system call.
This system call performs the same task as the readv() system call,
with the exception of having the fourth argument, offset, which
specifes the file offset at which the input operation is to be performed.
Because of this, the preadv() implementation is based on the readv()
implementation in linux-user mode.

But, since preadv() is implemented in the kernel as a 5-argument syscall,
5 arguments are needed to be handled as input and passed to the host
syscall.

The pos_l and pos_h argument of the safe_preadv() are of type unsigned
long, which can be of different sizes on different platforms. The input
arguments are converted to the appropriate host size when passed to
safe_preadv().

Signed-off-by: Dejan Jovicevic <dejan.jovicevic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:20:13 +03:00
Aleksandar Markovic
5a03cd009a linux-user: Add support for syncfs() syscall
This patch implements Qemu user mode syncfs() syscall support. Syscall
syncfs() syncs the filesystem containing file determined by the open
file descriptor passed as the argument to syncfs().

The implementation consists of a straightforward invocation of host's
syncfs(). Configure and strace support is included as well.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:20:13 +03:00
Aleksandar Markovic
38860a0343 linux-user: Add support for clock_adjtime() syscall
This patch implements Qemu user mode clock_adjtime() syscall support.

The implementation is based on invocation of host's clock_adjtime().

Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:20:09 +03:00
Peter Maydell
04c95f4da7 linux-user: Don't use alloca() for epoll_wait's epoll event array
The epoll event array which epoll_wait() allocates has a size
determined by the guest which could potentially be quite large.
Use g_try_new() rather than alloca() so that we can fail more
cleanly if the guest hands us an oversize value. (ENOMEM is
not a documented return value for epoll_wait() but in practice
some kernel configurations can return it -- see for instance
sys_oabi_epoll_wait() on ARM.)

This rearrangement includes fixing a bug where we were
incorrectly passing a negative length to unlock_user() in
the error-exit codepath.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:19:41 +03:00
Laurent Vivier
434f286bbc linux-user: add RTA_PRIORITY in netlink
Used by fedora21 on ppc64 in the network initialization

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:19:40 +03:00
Laurent Vivier
2f14788c54 linux-user: add kcmp() syscall
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:19:40 +03:00
Aleksandar Markovic
da2c8ad7a5 linux-user: Fix syslog() syscall support
There are currently several problems related to syslog() support.

For example, if the second argument "bufp" of target syslog() syscall
is NULL, the current implementation always returns error code EFAULT.
However, NULL is a perfectly valid value for the second argument for
many use cases of this syscall. This is, for example, visible from
this excerpt of man page for syslog(2):

> EINVAL Bad arguments (e.g., bad type; or for type 2, 3, or 4, buf is
>        NULL, or len is less than zero; or for type 8, the level is
>        outside the range 1 to 8).

Moreover, the argument "bufp" is ignored for all cases of values of the
first argument, except 2, 3 and 4. This means that for such cases
(the first argument is not 2, 3 or 4), there is no need to pass "buf"
between host and target, and it can be set to NULL while calling host's
syslog(), without loss of emulation accuracy.

Note also that if "bufp" is NULL and the first argument is 2, 3 or 4, the
correct returned error code is EINVAL, not EFAULT.

All these details are reflected in this patch.

"#ifdef TARGET_NR_syslog" is also proprerly inserted when needed.

Support for Qemu's "-strace" switch for syslog() syscall is included too.

LTP tests syslog11 and syslog12 pass with this patch (while fail without
it), on any platform.

Changes to original patch by Riku Voipio:

 fixed error paths in TARGET_SYSLOG_ACTION_READ_ALL to match

http://lxr.free-electrons.com/source/kernel/printk/printk.c?v=4.7#L1335

Should fix also the build error in:

https://lists.gnu.org/archive/html/qemu-devel/2016-10/msg03721.html

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:19:40 +03:00
Aleksandar Markovic
ff71a4545c linux-user: Fix socketcall() syscall support
Since not all Linux host platforms support socketcall() (most notably
Intel), do_socketcall() function in Qemu's syscalls.c is implemented to
mirror the corespondant implementation of socketcall() in Linux kernel,
and to utilise individual socket operations that are supported on all
Linux platforms. (see kernel source file net/socket.c, definition of
socketcall).

However, error codes produced by Qemu implementation are wrong for the
cases of invalid values of the first argument. Also, naming of constants
is not consistent with kernel one, and not consistant with Qemu convention
of prefixing such constants with "TARGET_". This patch in that light
brings do_socketcall() closer to its kernel counterpart, and in that way
fixes the errors and yields more consisrtent Qemu code.

There were also three missing cases (among 20) for strace support for
socketcall(). The array that contains pointers for appropriate printing
functions is updated with 3 elements, however pointers to functions are
left NULL, and its implementation is left for future.

Also, this patch fixes failure of LTP test socketcall02, if executed on some
Qemu emulated sywstems (uer mode).

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:19:40 +03:00
Aleksandar Markovic
da39db63e4 linux-user: Fix msgrcv() and msgsnd() syscalls support
If syscalls msgrcv() and msgsnd() fail, they return E2BIG, EACCES,
EAGAIN, EFAULT, EIDRM, EINTR, EINVAL, ENOMEM, or ENOMSG.

By examining negative scenarios of these syscalls for Mips, it was
established that ENOMSG does not have the same value accross all
platforms, but it is nevertheless not included for conversion in
the correspondant conversion table defined in linux-user/syscall.c.
This is certainly a bug, since it leads to the incorrect emulation
of msgrcv() and msgsnd() for scenarios involving ENOMSG.

This patch fixes this by extending the conversion table to include
ENOMSG.

Also, LTP test msgrcv04 will be fixed for some platforms.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:19:40 +03:00
Aleksandar Markovic
c7536ab679 linux-user: Fix mq_open() syscall support
Conversion of file creation flags (O_CREAT, ...) from target to host
was missing.

Also, this patch implements better error handling.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:19:39 +03:00
Aleksandar Markovic
19f59bcef9 linux-user: Add support for adjtimex() syscall
This patch implements Qemu user mode adjtimex() syscall support.

Syscall adjtimex() reads and optionally sets parameters for a clock
adjustment algorithm used in network synchonization or similar scenarios.

Its declaration is:

int adjtimex(struct timex *buf);

The correspondent source code in the Linux kernel is at kernel/time.c,
line 206.

The Qemu implementation is based on invocation of host's adjtimex(), and
its key part is in the "TARGET_NR_adjtimex" case segment of the the main
switch statement of the function do_syscall(), in linux-user/syscalls.c. All
necessary conversions of the data structures from target to host and from
host to target are covered. Two new functions, target_to_host_timex() and
host_to_target_timex(), are provided for the purpose of such conversions.
For that purpose, the support for related structure "timex" had tp be added
to the file linux-user/syscall_defs.h, based on its definition in Linux
kernel. Also, the relevant support for "-strace" Qemu option is included
in files linux-user/strace.c and linux-user/strace.list.

This patch also fixes failures of LTP tests adjtimex01 and adjtimex02, if
executed in Qemu user mode.

Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:19:39 +03:00
Peter Maydell
a20fd901af trivial patches for 2016-10-08
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJX+LTGAAoJEHAbT2saaT5ZIBwH+wfho+xxruEjro6qPvSAtdKk
 BBsOWBfBoqWfbAbOxxCO8ina2nA7p5XbyzSXUr94nZhvZMB9BkgL6la03gdS0Yr2
 jHf0J9mM8fIbMQFsEKGOPcdpvU7VEXeFwridZYzypiRvbNSdWK3SKVBKgz2ADNhb
 l4Tos81IZeH/mw8HcU3XgSGSTV4JuKP4XsnmwlFMa8/sWM/X3vVgx5IG26KURZQm
 pW720jcX0meSfji5YvhspfbBbp1g2EorTZb6iLcZf+OUIB6XkViMisVasnyOo2HJ
 cehPlhAHixwq1kXGItc1fs11VloZ6hvEZ7kZ615jAdsD2sGJObtGDxgyJW3+gPo=
 =HPHj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging

trivial patches for 2016-10-08

# gpg: Signature made Sat 08 Oct 2016 09:56:38 BST
# gpg:                using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* remotes/mjt/tags/trivial-patches-fetch: (26 commits)
  net/filter-mirror: Fix mirror initial check typo
  virtio: rename the bar index field name in VirtIOPCIProxy
  linux-user: include <poll.h> instead of <sys/poll.h>
  char: fix missing return in error path for chardev TLS init
  CODING_STYLE: Fix a typo ("have" vs. "has")
  bitmap: refine and move BITMAP_{FIRST/LAST}_WORD_MASK
  build-sys: fix find-in-path
  m68k: change default system clock for m5208evb
  exec: remove unused compacted argument
  usb: ehci: fix memory leak in ehci_process_itd
  qapi: make the json schema files more regular.
  maint: Add module_block.h to .gitignore
  MAINTAINERS: Some updates related to the SH4 machines
  MAINTAINERS: Add some more MIPS related files
  MAINTAINERS: Add usermode related config files
  MAINTAINERS: Add some more pattern to recognize all win32 related files
  MAINTAINERS: Add some more rocker related files
  MAINTAINERS: Add header files to CRIS section
  MAINTAINERS: Add some more files to the virtio section
  MAINTAINERS: Add some SPARC machine related files
  ...

# Conflicts:
#	MAINTAINERS
2016-10-10 13:01:43 +01:00
Felix Janda
0839f11cda linux-user: include <poll.h> instead of <sys/poll.h>
This removes the last usage of <sys/poll.h> in the code base.

Signed-off-by: Felix Janda <felix.janda@posteo.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-08 11:25:29 +03:00
Alex Bennée
dd1f63493a linux-user/syscall: extend lock around cpu-list
There is a potential race if several threads exit at once. To serialise
the exits extend the lock above the initial checking of the CPU list.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160930213106.20186-11-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04 10:00:26 +02:00
Aleksandar Markovic
0444a3b793 linux-user: Add missing TARGET_EDQUOT error code for Mips
EDQUOT is defined for Mips platform in Linux kernel in such a way
that it has different value than on most other platforms. However,
correspondent TARGET_EDQUOT for Mips is missing in Qemu code. Moreover,
TARGET_EDQUOT is missing from the table for conversion of error codes
from host to target. This patch fixes these problems.

Without this patch, syscalls add_key(), keyctl(), link(), mkdir(), mknod(),
open(), rename(), request_key(), setxattr(), symlink(), and write() will not
be able to return the right error code in some scenarios on Mips platform.
(Some of these syscalls are not yet supported in Qemu, but once they are
supported, they will need correct EDQUOT handling.)

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-09-23 07:07:35 +01:00
Aleksandar Markovic
d7779acb30 linux-user: Fix certain argument alignment cases for Mips64
The function that is changed in this patch is supposed to indicate that
there was certain argument rearrangement related to 64-bit arguments on
32-bit platforms. The background on such rearrangements can be found,
for example, in the man page for syscall(2).

However, for 64-bit Mips architectures there is no such rearrangement,
and this patch reflects it.

Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-09-23 07:07:34 +01:00
Laurent Vivier
5457dc9e37 linux-user: fix TARGET_NR_select
TARGET_NR_select can have three different implementations:

  1- to always return -ENOSYS

     microblaze, ppc, ppc64

     -> TARGET_WANT_NI_OLD_SELECT

  2- to take parameters from a structure pointed by arg1
    (kernel sys_old_select)

     i386, arm, m68k

     -> TARGET_WANT_OLD_SYS_SELECT

  3- to take parameters from arg[1-5]
     (kernel sys_select)

     x86_64, alpha, s390x,
     cris, sparc, sparc64

Some (new) architectures don't define NR_select,

  4- but only NR__newselect with sys_select:

      mips, mips64, sh

  5- don't define NR__newselect, and use pselect6 syscall:

      aarch64, openrisc, tilegx, unicore32

Reported-by: Timothy Pearson <tpearson@raptorengineering.com>
Reported-by: Allan Wirth <awirth@akamai.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-22 07:24:21 +03:00
Peter Maydell
5ea2fc84da linux-user: Sanity check clone flags
We currently make no checks on the flags passed to the clone syscall,
which means we will not fail clone attempts which ask for features
that we can't implement. Add sanity checking of the flags to clone
(which we were already doing in the "this is a fork" path, but not
for the "this is a new thread" path), tidy up the checking in
the fork path to match it, and check that the fork case isn't trying
to specify a custom termination signal.

This is helpful in causing some LTP test cases to fail cleanly
rather than behaving bizarrely when we let the clone succeed
but didn't provide the semantics requested by the flags.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 22:14:27 +03:00
Peter Maydell
7cfbd386b9 linux-user: Remove unnecessary nptl_flags variable from do_fork()
The 'nptl_flags' variable in do_fork() is set to a copy of
'flags', and then the CLONE_NPTL_FLAGS are cleared out of 'flags'.
However the only effect of this is that the later check on
"if (flags & CLONE_PARENT_SETTID)" is never true. Since we
will already have done the setting of parent_tidptr in clone_func()
in the child thread, we don't need to do it again.

Delete the dead if() and the clearing of CLONE_NPTL_FLAGS from
'flags', and then use 'flags' where we were previously using
'nptl_flags', so we can delete the unnecessary variable.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 22:14:18 +03:00
Peter Maydell
9d2803f720 linux-user: Pass si_type information to queue_signal() explicitly
Instead of assuming in queue_signal() that all callers are passing
a siginfo structure which uses the _sifields._sigfault part of the
union (and thus a si_type of QEMU_SI_FAULT), make callers pass
the si_type they require in as an argument.

[RV adjusted to apply]
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 22:01:28 +03:00
Peter Maydell
ee8e76141b linux-user: Use correct target SHMLBA in shmat()
The shmat() handling needs to do target-specific handling
of the attach address for shmat():
 * if the SHM_RND flag is passed, the address is rounded
   down to a SHMLBA boundary
 * if SHM_RND is not passed, then the call is failed EINVAL
   if the address is not a multiple of SHMLBA

Since SHMLBA is target-specific, we need to do this
checking and rounding in QEMU and can't leave it up to the
host syscall.

Allow targets to define TARGET_FORCE_SHMLBA and provide
a target_shmlba() function if appropriate, and update
do_shmat() to honour them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:28:52 +03:00
Peter Maydell
f9757b1d96 linux-user: Fix incorrect use of host errno in do_ioctl_dm()
do_ioctl_dm() should return target errno values, not host ones;
correct an accidental use of a host errno in an error path.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:27:07 +03:00
Peter Maydell
3211215e74 linux-user: Check lock_user() return value for NULL
lock_user() can return NULL, which typically means the syscall
should fail with EFAULT. Add checks in various places where
Coverity spotted that we were missing them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:26:46 +03:00
Peter Maydell
ce9c139d93 linux-user: Range check the nfds argument to ppoll syscall
Do an initial range check on the ppoll syscall's nfds argument,
to avoid possible overflow in the calculation of the lock_user()
size argument. The host kernel will later apply the rather lower
limit based on RLIMIT_NOFILE as appropriate.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:25:53 +03:00
Peter Maydell
2ba7fae3bd linux-user: Check for bad event numbers in epoll_wait
The kernel checks that the maxevents parameter to epoll_wait
is non-negative and not larger than EP_MAX_EVENTS. Add this
check to our implementation, so that:
 * we fail these cases EINVAL rather than EFAULT
 * we don't pass negative or overflowing values to the
   lock_user() size calculation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:25:26 +03:00
Peter Maydell
700fa58e4b linux-user: Use direct syscall for utimensat
The linux utimensat syscall differs in semantics from the
libc function because the syscall combines the features
of utimensat() and futimens(). Rather than trying to
split these apart in order to call the two libc functions
which then call the same underlying syscall, just always
directly make the host syscall. This fixes bugs in some
of the corner cases which should return errors from the
syscall but which we were incorrectly directing to futimens().

This doesn't reduce the set of hosts that our syscall
implementation will work on, because if the direct syscall
fails ENOSYS then the libc functions would also fail ENOSYS.
(The system call has been in the kernel since 2.6.22 anyway.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:25:10 +03:00
Peter Maydell
26a6fc96e0 linux-user: Allow bad msg_name for recvfrom on connected socket
The POSIX standard mandates that for a connected socket recvfrom()
must ignore the msg_name and msg_namelen fields. This is awkward
for QEMU because we will attempt to copy them from guest address
space. Handle this by not immediately returning a TARGET_EFAULT
if the copy failed, but instead passing a known-bad address
to the host kernel, which can then return EFAULT or ignore the
value appropriately.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:23:59 +03:00
Peter Maydell
97b0797033 linux-user: Fix errno for sendrecvmsg with large iovec length
The sendmsg and recvmsg syscalls use a different errno to indicate
an overlarge iovec length from readv and writev. Handle this
special case in do_sendrcvmsg_locked() to avoid getting the
default errno returned by lock_iovec().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:20:31 +03:00
Peter Maydell
dab32b321f linux-user: Fix handling of iovec counts
In the kernel the length of an iovec is generally handled as
an unsigned long, not an integer; fix the parameter to
lock_iovec() accordingly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:19:46 +03:00
Michal Privoznik
60c6b790fc syscall.c: Redefine IFLA_* enums
In 9c37146782 I've tried to fix a broken build with older
linux-headers. However, I didn't do it properly. The solution
implemented here is to grab the enums that caused the problem
initially, and rename their values so that they are "QEMU_"
prefixed. In order to guarantee matching values with actual
enums from linux-headers, the enums are seeded with starting
values from the original enums.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 75c14d6e8a97c4ff3931d69c13eab7376968d8b4.1471593869.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-19 09:47:51 +01:00
Michal Privoznik
aee5f8f98e Revert "syscall.c: Fix build with older linux-headers"
The fix I've made there was wrong. I mean, basically what I did
there was equivalent to:

  #if 0
  some code;
  #endif

This reverts commit 9c37146782.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 40d61349e445c1ad5fef795da704bf7ed6e19c86.1471593869.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-19 09:47:51 +01:00
Peter Maydell
9fea273c85 linux-user: Fix llseek with high bit of offset_low set
The llseek syscall takes two 32-bit arguments, offset_high
and offset_low, which must be combined to form a single
64-bit offset. Unfortunately we were combining them with
   (uint64_t)arg2 << 32) | arg3
and arg3 is a signed type; this meant that when promoting
arg3 to a 64-bit type it would be sign-extended. The effect
was that if the offset happened to have bit 31 set then
this bit would get sign-extended into all of bits 63..32.
Explicitly cast arg3 to abi_ulong to avoid the erroneous
sign extension.

Reported-by: Chanho Park <parkch98@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Chanho Park <parkch98@gmail.com>
Message-id: 1470938379-1133-1-git-send-email-peter.maydell@linaro.org
2016-08-16 16:42:03 +01:00
Michal Privoznik
9c37146782 syscall.c: Fix build with older linux-headers
In c5dff280 we tried to make us understand netlink messages more.
So we've added a code that does some translation. However, the
code assumed linux-headers to be at least version 4.4 of it
because most of the symbols there (if not all of them) were added
in just that release. This, however, breaks build on systems with
older versions of the package.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-id: 23806aac6db3baf7e2cdab4c62d6e3468ce6b4dc.1471340849.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-16 16:14:48 +01:00
Peter Maydell
ef4330c23b linux-user: Handle brk() attempts with very large sizes
In do_brk(), we were inadvertently truncating the size
of a requested brk() from the guest by putting it into an
'int' variable. This meant that we would incorrectly report
success back to the guest rather than a failed allocation,
typically resulting in the guest then segfaulting. Use
abi_ulong instead.

This fixes a crash in the '31370.cc' test in the gcc libstdc++ test
suite (the test case starts by trying to allocate a very large
size and reduces the size until the allocation succeeds).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-08-04 16:38:17 +03:00
Peter Maydell
005eb2ae1f linux-user: Fix target_semid_ds structure definition
The target_semid_ds structure is not correct for all
architectures: the padding fields should only exist for:
 * 32-bit ABIs
 * x86

It is also misnamed, since it is following the kernel
semid64_ds structure (QEMU doesn't support the legacy
semid_ds structure at all). Rename the struct, provide
a correct generic definition and allow the oddball x86
architecture to provide its own version.

This fixes broken SYSV semaphores for all our 64-bit
architectures except x86 and ppc.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-08-04 16:36:53 +03:00
Peter Maydell
332c9781f6 linux-user: Don't write off end of new_utsname buffer
Use g_strlcpy() rather than strcpy() to copy the uname string
into the structure we return to the guest for the uname syscall.
This avoids overrunning the buffer if the user passed us an
overlong string via the QEMU command line.

We fix a comment typo while we're in the neighbourhood.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-08-04 16:36:26 +03:00
Peter Maydell
ba4b3f668a linux-user: Fix memchr() argument in open_self_cmdline()
In open_self_cmdline() we look for a 0 in the buffer we read
from /prc/self/cmdline. We were incorrectly passing the length
of our buf[] array to memchr() as the length to search, rather
than the number of bytes we actually read into it, which could
be shorter. This was spotted by Coverity (because it could
result in our trying to pass a negative length argument to
write()).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-08-04 16:35:30 +03:00
Peter Maydell
a1e221929f linux-user: Handle short lengths in host_to_target_sockaddr()
If userspace specifies a short buffer for a target sockaddr,
the kernel will only copy in as much as it has space for
(or none at all if the length is zero) -- see the kernel
move_addr_to_user() function. Mimic this in QEMU's
host_to_target_sockaddr() routine.

In particular, this fixes a segfault running the LTP
recvfrom01 test, where the guest makes a recvfrom()
call with a bad buffer pointer and other parameters which
cause the kernel to set the addrlen to zero; because we
did not skip the attempt to swap the sa_family field we
segfaulted on the bad address.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-19 15:23:17 +03:00
Peter Maydell
c815701e81 linux-user: Check sigsetsize argument to syscalls
Many syscalls which take a sigset_t argument also take an argument
giving the size of the sigset_t.  The kernel insists that this
matches its idea of the type size and fails EINVAL if it is not.
Implement this logic in QEMU.  (This mostly just means some LTP test
cases which check error cases now pass.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
2016-07-19 15:20:59 +03:00
Laurent Vivier
c5dff280b8 linux-user: add nested netlink types
Nested types are used by the kernel to send link information and
protocol properties.

We can see following errors with "ip link show":

Unimplemented nested type 26
Unimplemented nested type 26
Unimplemented nested type 18
Unimplemented nested type 26
Unimplemented nested type 18
Unimplemented nested type 26

This patch implements nested types 18 (IFLA_LINKINFO) and
26 (IFLA_AF_SPEC).

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-19 15:20:59 +03:00
Laurent Vivier
a82ea9393d linux-user: convert sockaddr_ll from host to target
As we convert sockaddr for AF_PACKET family for sendto() (target to
host) we need also to convert this for getsockname() (host to target).

arping uses getsockname() to get the the interface address and uses
this address with sendto().

Tested with:

    /sbin/arping -D -q -c2 -I eno1 192.168.122.88

...
getsockname(3, {sa_family=AF_PACKET, proto=0x806, if2,
pkttype=PACKET_HOST, addr(6)={1, 10c37b6b9a76}, [18]) = 0
...
sendto(3, "..." 28, 0,
       {sa_family=AF_PACKET, proto=0x806, if2, pkttype=PACKET_HOST,
       addr(6)={1, ffffffffffff}, 20) = 28
...

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-19 15:20:59 +03:00
Laurent Vivier
c35e1f9c87 linux-user: add fd_trans helper in do_recvfrom()
Fix passwd using netlink audit.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-19 15:20:59 +03:00
Laurent Vivier
7d61d89232 linux-user: fix netlink memory corruption
Netlink is byte-swapping data in the guest memory (it's bad).

It's ok when the data come from the host as they are generated by the
host.

But it doesn't work when data come from the guest: the guest can
try to reuse these data whereas they have been byte-swapped.

This is what happens in glibc:

glibc generates a sequence number in nlh.nlmsg_seq and calls
sendto() with this nlh. In sendto(), we byte-swap nlmsg.seq.

Later, after the recvmsg(), glibc compares nlh.nlmsg_seq with
sequence number given in return, and of course it fails (hangs),
because nlh.nlmsg_seq is not valid anymore.

The involved code in glibc is:

sysdeps/unix/sysv/linux/check_pf.c:make_request()
...
  req.nlh.nlmsg_seq = time (NULL);
...
  if (TEMP_FAILURE_RETRY (__sendto (fd, (void *) &req, sizeof (req), 0,
                                    (struct sockaddr *) &nladdr,
                                    sizeof (nladdr))) < 0)
<here req.nlh.nlmsg_seq has been byte-swapped>
...
  do
    {
...
      ssize_t read_len = TEMP_FAILURE_RETRY (__recvmsg (fd, &msg, 0));
...
      struct nlmsghdr *nlmh;
      for (nlmh = (struct nlmsghdr *) buf;
           NLMSG_OK (nlmh, (size_t) read_len);
           nlmh = (struct nlmsghdr *) NLMSG_NEXT (nlmh, read_len))
        {
<we compare nlmh->nlmsg_seq with corrupted req.nlh.nlmsg_seq>
          if (nladdr.nl_pid != 0 || (pid_t) nlmh->nlmsg_pid != pid
              || nlmh->nlmsg_seq != req.nlh.nlmsg_seq)
            continue;
...
          else if (nlmh->nlmsg_type == NLMSG_DONE)
            /* We found the end, leave the loop.  */
            done = true;
        }
    }
  while (! done);

As we have a continue on "nlmh->nlmsg_seq != req.nlh.nlmsg_seq",
"done" cannot be set to "true" and we have an infinite loop.

It's why commands like "apt-get update" or "dnf update hangs".

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-19 15:20:59 +03:00
Laurent Vivier
ef759f6fcc linux-user: fd_trans_*_data() returns the length
fd_trans_target_to_host_data() and fd_trans_host_to_target_data() must
return the length of processed data.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-19 15:20:58 +03:00
Peter Maydell
ddf31aa853 linux-user: Fix compilation when F_SETPIPE_SZ isn't defined
Older kernels don't have F_SETPIPE_SZ and F_GETPIPE_SZ (in
particular RHEL6's system headers don't define these). Add
ifdefs so that we can gracefully fall back to not supporting
those guest ioctls rather than failing to build.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 1467304429-21470-1-git-send-email-peter.maydell@linaro.org
2016-06-30 19:27:51 +01:00
Peter Maydell
845d1e7e42 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJXcuu4AAoJEJykq7OBq3PIG0EH/0qjHztvJXFcOB/pMYt9fRoe
 /zEuqSaSQJYBNjRonp4jUslziJG7ULyrcqbW4BmIswQG3R8577z5vQdJ2XKSRoAf
 sUb4vVnBiTGdZPWPvO7pxuqgYSHoGGSsHFCuzs7gL+mOkJs3U8Uw+9DExAe80J/R
 C4ZU40A4EW/UUebrWeasW8DG5b0h6dFSnIKtSo6DcGbcGDHQS1FwM/atpFk58Zev
 lpS+T8Q1JEuIYK6RAa1Oc9KxeJO3OROen2HqlPDGCFl32t3k7lEmR77J4bNg/mDj
 XbYQZbVtDeIN02/o5GSAF4ros0UNZ/Ut9Z0YeWoCzBumu9ZK0iGbitgLG8w7psA=
 =gHyO
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

# gpg: Signature made Tue 28 Jun 2016 22:27:20 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  trace: [*-user] Add events to trace guest syscalls in syscall emulation mode
  trace: enable tracing in qemu-img
  qemu-img: move common options parsing before commands processing
  trace: enable tracing in qemu-nbd
  trace: enable tracing in qemu-io
  trace: move qemu_trace_opts to trace/control.c
  doc: move text describing --trace to specific .texi file
  doc: sync help description for --trace with man for qemu.1

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-29 14:07:57 +01:00
Lluís Vilanova
9c15e70086 trace: [*-user] Add events to trace guest syscalls in syscall emulation mode
Adds two events to trace syscalls in syscall emulation mode (*-user):

* guest_user_syscall: Emitted before the syscall is emulated; contains
  the syscall number and arguments.

* guest_user_syscall_ret: Emitted after the syscall is emulated;
  contains the syscall number and return value.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146651712411.12388.10024905980452504938.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-28 21:14:12 +01:00
Laurent Vivier
b9403979b5 linux-user: don't swap NLMSG_DATA() fields
If the structure pointed by NLMSG_DATA() is bigger
than the size of NLMSG_DATA(), don't swap its fields
to avoid memory corruption.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-26 13:17:22 +03:00
Laurent Vivier
48dc0f2c3d linux-user: fd_trans_host_to_target_data() must process only received data
if we process the whole buffer, the netlink helpers can try
to swap invalid data.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-26 13:17:22 +03:00
Laurent Vivier
84f34b00c8 linux-user: add missing return in netlink switch statement
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-26 13:17:21 +03:00
Peter Maydell
7e3b92ece0 linux-user: Support F_GETPIPE_SZ and F_SETPIPE_SZ fcntls
Support the F_GETPIPE_SZ and F_SETPIPE_SZ fcntl operations.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-26 13:17:21 +03:00
Peter Maydell
4debae6fa5 linux-user: Fix wrong type used for argument to rt_sigqueueinfo
The third argument to the rt_sigqueueinfo syscall is a pointer to
a siginfo_t, not a pointer to a sigset_t. Fix the error in the
arguments to lock_user(), which meant that we would not have
detected some faults that we should.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-26 13:17:21 +03:00
Peter Maydell
1d48fdd9d8 linux-user: Don't use sigfillset() on uc->uc_sigmask
The kernel and libc have different ideas about what a sigset_t
is -- for the kernel it is only _NSIG / 8 bytes in size (usually
8 bytes), but for libc it is much larger, 128 bytes. In most
situations the difference doesn't matter, because if you pass a
pointer to a libc sigset_t to the kernel it just acts on the first
8 bytes of it, but for the ucontext_t* argument to a signal handler
it trips us up. The kernel allocates this ucontext_t on the stack
according to its idea of the sigset_t type, but the type of the
ucontext_t defined by the libc headers uses the libc type, and
so do the manipulator functions like sigfillset(). This means that
 (1) sizeof(uc->uc_sigmask) is much larger than the actual
     space used on the stack
 (2) sigfillset(&uc->uc_sigmask) will write garbage 0xff bytes
     off the end of the structure, which can trash data that
     was on the stack before the signal handler was invoked,
     and may result in a crash after the handler returns

To avoid this, we use a memset() of the correct size to fill
the signal mask rather than using the libc function.

This fixes a problem where we would crash at least some of the
time on an i386 host when a signal was taken.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-26 13:17:20 +03:00
Peter Maydell
435da5e709 linux-user: Use safe_syscall wrapper for fcntl
Use the safe_syscall wrapper for fcntl. This is straightforward now
that we always use 'struct fcntl64' on the host, as we don't need
to select whether to call the host's fcntl64 or fcntl syscall
(a detail that the libc previously hid for us).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-26 13:17:20 +03:00
Peter Maydell
213d3e9ea2 linux-user: Use __get_user() and __put_user() to handle structs in do_fcntl()
Use the __get_user() and __put_user() to handle reading and writing the
guest structures in do_ioctl(). This has two benefits:
 * avoids possible errors due to misaligned guest pointers
 * correctly sign extends signed fields (like l_start in struct flock)
   which might be different sizes between guest and host

To do this we abstract out into copy_from/to_user functions. We
also standardize on always using host flock64 and the F_GETLK64
etc flock commands, as this means we always have 64 bit offsets
whether the host is 64-bit or 32-bit and we don't need to support
conversion to both host struct flock and struct flock64.

In passing we fix errors in converting l_type from the host to
the target (where we were doing a byteswap of the host value
before trying to do the convert-bitmasks operation rather than
otherwise, and inexplicably shifting left by 1); these were
accidentally left over when the original simple "just shift by 1"
arm<->x86 conversion of commit 43f238d was changed to the more
general scheme of using target_to_host_bitmask() functions in 2ba7f73.

[RV: fixed ifdef guard for eabi functions]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-26 13:16:41 +03:00
Paolo Bonzini
02d0e09503 os-posix: include sys/mman.h
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h.  Include it in
sysemu/os-posix.h and remove it from everywhere else.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16 18:39:03 +02:00
Peter Maydell
b66e10e4c9 linux-user pull request for June 2016
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV1gdMrRIkN7ePJvAAQhLcg/+Kby99taEuewItrA1yDs75jxOlLqaJopd
 cVzo4LFRFPhIn4UEKqRQS0CGoIeU/DYOmObvuUzJxs2LyUoHoqmQOwEm5obC2a85
 JrHo/NOppYBbyvvIEAAXzZDCZo0KZKVclrlT+AX5obpOSNSvAnKvEuLWq1aQ9WGN
 n4AzHuFEl885cd4nFd8VK/xth89bqz6U/z8CjgIuw3mczp1XNrK5IJJwAy5epHay
 GCBr9XHooW3SU971WS20RTRS0D33tKPHgCU3ZeZ3rKh4g3JNj6/ixdVgzi9NqFsQ
 5DzAj/iBGhN1LtCOednRS6tUt32Bhy8G/g4O3GiXdejagAmNe2wz31cveNJ8S3W5
 DK8SZAnJlz06zN5uIpOVQgDOqfXZkCp7ndq779QJoHOAnuOjJBcUbhw1myz2R3eR
 6208tStWl3R0+ATEK8CZ7ejg1cUHvdzyqGJA+1nC2HaFUrBWipxN8jf2fz9vO/wG
 G7zNbahvVgyJWO7bPNK4mxkb6qkWCETnCnLJsq2ZbmtPEMcINjD8vNWLNvFGVG8b
 2HbinDrzh0Z9Zik5gLZfiVyP5HFaWSrJn9QRVIgaUjuIH9n3/25sl9OvW/JLjxJ+
 h2P17CLnAK6dhUYc4R3wQTx2X/N2FvO4DD8iMYOcgDY6fhZ2b6EEyE9yBgQrIDbF
 gU1AlC/CX+M=
 =AXqa
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160608' into staging

linux-user pull request for June 2016

# gpg: Signature made Wed 08 Jun 2016 14:27:14 BST
# gpg:                using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg:                 aka "Riku Voipio <riku.voipio@linaro.org>"

* remotes/riku/tags/pull-linux-user-20160608: (44 commits)
  linux-user: In fork_end(), remove correct CPUs from CPU list
  linux-user: Special-case ERESTARTSYS in target_strerror()
  linux-user: Make target_strerror() return 'const char *'
  linux-user: Correct signedness of target_flock l_start and l_len fields
  linux-user: Use safe_syscall wrapper for ioctl
  linux-user: Use safe_syscall wrapper for accept and accept4 syscalls
  linux-user: Use safe_syscall wrapper for semop
  linux-user: Use safe_syscall wrapper for epoll_wait syscalls
  linux-user: Use safe_syscall wrapper for poll and ppoll syscalls
  linux-user: Use safe_syscall wrapper for sleep syscalls
  linux-user: Use safe_syscall wrapper for rt_sigtimedwait syscall
  linux-user: Use safe_syscall wrapper for flock
  linux-user: Use safe_syscall wrapper for mq_timedsend and mq_timedreceive
  linux-user: Use safe_syscall wrapper for msgsnd and msgrcv
  linux-user: Use safe_syscall wrapper for send* and recv* syscalls
  linux-user: Use safe_syscall wrapper for connect syscall
  linux-user: Use safe_syscall wrapper for readv and writev syscalls
  linux-user: Fix error conversion in 64-bit fadvise syscall
  linux-user: Fix NR_fadvise64 and NR_fadvise64_64 for 32-bit guests
  linux-user: Fix handling of arm_fadvise64_64 syscall
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Conflicts:
	configure
	scripts/qemu-binfmt-conf.sh
2016-06-08 18:34:32 +01:00
Peter Maydell
da2a34f7f9 linux-user: Special-case ERESTARTSYS in target_strerror()
Since TARGET_ERESTARTSYS and TARGET_ESIGRETURN are internal-to-QEMU
error numbers, handle them specially in target_strerror(), to avoid
confusing strace output like:

9521 rt_sigreturn(14,8,274886297808,8,0,268435456) = -1 errno=513 (Unknown error 513)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 12:06:57 +03:00
Peter Maydell
7dcdaeafe0 linux-user: Make target_strerror() return 'const char *'
Make target_strerror() return 'const char *' rather than just 'char *';
this will allow us to return constant strings from it for some special
cases.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
2016-06-08 12:06:57 +03:00
Peter Maydell
49ca6f3e24 linux-user: Use safe_syscall wrapper for ioctl
Use the safe_syscall wrapper to implement the ioctl syscall.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:47 +03:00
Peter Maydell
ff6dc13079 linux-user: Use safe_syscall wrapper for accept and accept4 syscalls
Use the safe_syscall wrapper for the accept and accept4 syscalls.
accept4 has been in the kernel since 2.6.28 so we can assume it
is always present.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:46 +03:00
Peter Maydell
ffb7ee796a linux-user: Use safe_syscall wrapper for semop
Use the safe_syscall wrapper for the semop syscall or IPC operation.
(We implement via the semtimedop syscall to make it easier to
implement the guest semtimedop syscall later.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:46 +03:00
Peter Maydell
227f02143f linux-user: Use safe_syscall wrapper for epoll_wait syscalls
Use the safe_syscall wrapper for epoll_wait and epoll_pwait syscalls.

Since we now directly use the host epoll_pwait syscall for both
epoll_wait and epoll_pwait, we don't need the configure machinery
to check whether glibc supports epoll_pwait(). (The kernel has
supported the syscall since 2.6.19 so we can assume it's always there.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:46 +03:00
Peter Maydell
a6130237b8 linux-user: Use safe_syscall wrapper for poll and ppoll syscalls
Use the safe_syscall wrapper for the poll and ppoll syscalls.
Since not all host architectures will have a poll syscall, we
have to rewrite the TARGET_NR_poll handling to use ppoll instead
(we can assume everywhere has ppoll by now).

We take the opportunity to switch to the code structure
already used in the implementation of epoll_wait and epoll_pwait,
which uses a switch() to avoid interleaving #if and if (),
and to stop using a variable with a leading '_' which is in
the implementation's namespace.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:46 +03:00
Peter Maydell
9e518226f4 linux-user: Use safe_syscall wrapper for sleep syscalls
Use the safe_syscall wrapper for the clock_nanosleep and nanosleep
syscalls.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:46 +03:00
Peter Maydell
b3f8233068 linux-user: Use safe_syscall wrapper for rt_sigtimedwait syscall
Use the safe_syscall wrapper for the rt_sigtimedwait syscall.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:46 +03:00
Peter Maydell
2a8459892f linux-user: Use safe_syscall wrapper for flock
Use the safe_syscall wrapper for the flock syscall.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:46 +03:00
Peter Maydell
d40ecd6618 linux-user: Use safe_syscall wrapper for mq_timedsend and mq_timedreceive
Use the safe_syscall wrapper for mq_timedsend and mq_timedreceive syscalls.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:46 +03:00
Peter Maydell
89f9fe4452 linux-user: Use safe_syscall wrapper for msgsnd and msgrcv
Use the safe_syscall wrapper for msgsnd and msgrcv syscalls.
This is made slightly awkward by some host architectures providing
only a single 'ipc' syscall rather than separate syscalls per
operation; we provide safe_msgsnd() and safe_msgrcv() as wrappers
around safe_ipc() to handle this if needed.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:45 +03:00
Peter Maydell
666875306e linux-user: Use safe_syscall wrapper for send* and recv* syscalls
Use the safe_syscall wrapper for the send, sendto, sendmsg, recv,
recvfrom and recvmsg syscalls.

RV: adjusted to apply
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:45 +03:00
Peter Maydell
2a3c761928 linux-user: Use safe_syscall wrapper for connect syscall
Use the safe_syscall wrapper for the connect syscall.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:45 +03:00
Peter Maydell
918c03ed9a linux-user: Use safe_syscall wrapper for readv and writev syscalls
Use the safe_syscall wrapper for readv and writev syscalls.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:45 +03:00
Peter Maydell
977d8241c1 linux-user: Fix error conversion in 64-bit fadvise syscall
Fix a missing host-to-target errno conversion in the 64-bit
fadvise syscall emulation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:45 +03:00
Peter Maydell
badd3cd880 linux-user: Fix NR_fadvise64 and NR_fadvise64_64 for 32-bit guests
Fix errors in the implementation of NR_fadvise64 and NR_fadvise64_64
for 32-bit guests, which pass their off_t values in register pairs.
We can't use the 64-bit code path for this, so split out the 32-bit
cases, so that we can correctly handle the "only offset is 64-bit"
and "both offset and length are 64-bit" syscall flavours, and
"uses aligned register pairs" and "does not" flavours of target.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:45 +03:00
Peter Maydell
e0156a9dc4 linux-user: Fix handling of arm_fadvise64_64 syscall
32-bit ARM has an odd variant of the fadvise syscall which has
rearranged arguments, which we try to implement. Unfortunately we got
the rearrangement wrong.

This is a six-argument syscall whose arguments are:
 * fd
 * advise parameter
 * offset high half
 * offset low half
 * len high half
 * len low half

Stop trying to share code with the standard fadvise syscalls,
and just implement the syscall with the correct argument order.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 10:13:45 +03:00
Laurent Vivier
b1b2db29bd linux-user: Use DIV_ROUND_UP
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).

This patch is the result of coccinelle script
scripts/coccinelle/round.cocci

CC: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07 18:19:25 +03:00
Timothy E Baldwin
7d92d34ee4 linux-user: Restart fork() if signals pending
If there is a signal pending during fork() the signal handler will
erroneously be called in both the parent and child, so handle any
pending signals first.

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-20-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07 16:39:08 +03:00
Peter Maydell
bef653d92e linux-user: Use safe_syscall for kill, tkill and tgkill syscalls
Use the safe_syscall wrapper for the kill, tkill and tgkill syscalls.
Without this, if a thread sent a SIGKILL to itself it could kill the
thread before we had a chance to process a signal that arrived just
before the SIGKILL, and that signal would get lost.

We drop all the ifdeffery for tkill and tgkill, because every guest
architecture we support implements them, and they've been in Linux
since 2003 so we can assume the host headers define the __NR_tkill
and __NR_tgkill constants.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07 16:39:08 +03:00
Timothy E Baldwin
a0995886e2 linux-user: Restart exit() if signal pending
Without this a signal could vanish on thread exit.

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-26-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07 16:39:08 +03:00
Timothy E Baldwin
f59ec60610 linux-user: pause() should not pause if signal pending
Fix races between signal handling and the pause syscall by
reimplementing it using block_signals() and sigsuspend().
(Using safe_syscall(pause) would also work, except that the
pause syscall doesn't exist on all architectures.)

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-28-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07 16:39:07 +03:00
Peter Maydell
3d3efba020 linux-user: Fix race between multiple signals
If multiple host signals are received in quick succession they would
be queued in TaskState then delivered to the guest in spite of
signals being supposed to be blocked by the guest signal handler's
sa_mask. Fix this by decoupling the guest signal mask from the
host signal mask, so we can have protected sections where all
host signals are blocked. In particular we block signals from
when host_signal_handler() queues a signal from the guest until
process_pending_signals() has unqueued it. We also block signals
while we are manipulating the guest signal mask in emulation of
sigprocmask and similar syscalls.

Blocking host signals also ensures the correct behaviour with respect
to multiple threads and the overrun count of timer related signals.
Alas blocking and queuing in qemu is still needed because of virtual
processor exceptions, SIGSEGV and SIGBUS.

Blocking signals inside process_pending_signals() protects against
concurrency problems that would otherwise happen if host_signal_handler()
ran and accessed the signal data structures while process_pending_signals()
was manipulating them.

Since we now track the guest signal mask separately from that
of the host, the sigsuspend system calls must track the signal
mask passed to them, because when we process signals as we leave
the sigsuspend the guest signal mask in force is that passed to
sigsuspend.

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-19-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: make signal_pending a simple flag rather than a word with two flag bits;
 ensure we don't call block_signals() twice in sigreturn codepaths;
 document and assert() the guarantee that using do_sigprocmask() to
 get the current mask never fails;  use the qemu atomics.h functions
 rather than raw volatile variable access; add extra commentary and
 documentation; block SIGSEGV/SIGBUS in block_signals() and in
 process_pending_signals() because they can't occur synchronously here;
 check the right do_sigprocmask() call for errors in ssetmask syscall;
 expand commit message; fixed sigsuspend() hanging]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07 16:39:07 +03:00
Peter Maydell
2fe4fba115 linux-user: Use safe_syscall for sigsuspend syscalls
Use the safe_syscall wrapper for sigsuspend syscalls. This
means that we will definitely deliver a signal that arrives
before we do the sigsuspend call, rather than blocking first
and delivering afterwards.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07 16:39:06 +03:00
Peter Maydell
b28a1f333a linux-user: Define macro for size of host kernel sigset_t
Some host syscalls take an argument specifying the size of a
host kernel's sigset_t (which isn't necessarily the same as
that of the host libc's type of that name). Instead of hardcoding
_NSIG / 8 where we do this, define and use a SIGSET_T_SIZE macro.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07 16:39:06 +03:00
Laurent Vivier
575b22b1b7 linux-user: check if NETLINK_ROUTE is available
Some IFLA_* symbols can be missing in the host linux/if_link.h,
but as they are enums and not "#defines", check in "configure" if
last known  (IFLA_PROTO_DOWN) is available and if not, disable
management of NETLINK_ROUTE protocol.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07 11:39:00 +03:00
Laurent Vivier
5ce9bb5937 linux-user: add netlink audit
This is, for instance, needed to log in a container.

Without this, the user cannot be identified and the console login
fails with "Login incorrect".

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07 11:37:14 +03:00
Laurent Vivier
b265620bfb linux-user: support netlink protocol NETLINK_KOBJECT_UEVENT
This is the protocol used by udevd to manage kernel events.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07 11:34:36 +03:00
Laurent Vivier
6c5b5645ae linux-user: add rtnetlink(7) support
rtnetlink is needed to use iproute package (ip addr, ip route)
and dhcp client.

Examples:

Without this patch:
    # ip link
    Cannot open netlink socket: Address family not supported by protocol
    # ip addr
    Cannot open netlink socket: Address family not supported by protocol
    # ip route
    Cannot open netlink socket: Address family not supported by protocol
    # dhclient eth0
    Cannot open netlink socket: Address family not supported by protocol
    Cannot open netlink socket: Address family not supported by protocol

With this patch:
    # ip link
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT qlen 1000
        link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
    # ip addr show eth0
    51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
        link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
        inet 192.168.122.197/24 brd 192.168.122.255 scope global eth0
           valid_lft forever preferred_lft forever
        inet6 fe80::216:3eff:fe89:6bd7/64 scope link
           valid_lft forever preferred_lft forever
    # ip route
    default via 192.168.122.1 dev eth0
    192.168.122.0/24 dev eth0  proto kernel  scope link  src 192.168.122.197
    # ip addr flush eth0
    # ip addr add 192.168.122.10 dev eth0
    # ip addr show eth0
    51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
        link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
        inet 192.168.122.10/32 scope global eth0
           valid_lft forever preferred_lft forever
    # ip route add 192.168.122.0/24 via 192.168.122.10
    # ip route
        192.168.122.0/24 via 192.168.122.10 dev eth0

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07 11:33:36 +03:00
Peter Maydell
fd6f7798ac linux-user: Use direct syscalls for setuid(), etc
On Linux the setuid(), setgid(), etc system calls have different semantics
from the libc functions. The libc functions follow POSIX and update the
credentials for all threads in the process; the system calls update only
the thread which makes the call. (This impedance mismatch is worked around
in libc by signalling all threads to tell them to do a syscall, in a
byzantine and fragile way; see http://ewontfix.com/17/.)

Since in linux-user we are trying to emulate the system call semantics,
we must implement all these syscalls to directly call the underlying
host syscall, rather than calling the host libc function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:50:39 +03:00
Peter Maydell
415d847110 linux-user: Use g_try_malloc() in do_msgrcv()
In do_msgrcv() we want to allocate a message buffer, whose size
is passed to us by the guest. That means we could legitimately
fail, so use g_try_malloc() and handle the error case, in the same
way that do_msgsnd() does.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:50:39 +03:00
Peter Maydell
99874f6552 linux-user: Handle msgrcv error case correctly
The msgrcv ABI is a bit odd -- the msgsz argument is a size_t, which is
unsigned, but it must fail EINVAL if the value is negative when cast
to a long. We were incorrectly passing the value through an
"unsigned int", which meant that if the guest was 32-bit longs and
the host was 64-bit longs an input of 0xffffffff (which should trigger
EINVAL) would simply be passed to the host msgrcv() as 0xffffffff,
where it does not cause the host kernel to reject it.
Follow the same approach as do_msgsnd() in using a ssize_t and
doing the check for negative values by hand, so we correctly fail
in this corner case.

This fixes the msgrcv03 Linux Test Project test case, which otherwise
hangs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:50:39 +03:00
Peter Maydell
c7e35da348 linux-user: Handle negative values in timespec conversion
In a struct timespec, both fields are signed longs. Converting
them from guest to host with code like
    host_ts->tv_sec = tswapal(target_ts->tv_sec);
mishandles negative values if the guest has 32-bit longs and
the host has 64-bit longs because tswapal()'s return type is
abi_ulong: the assignment will zero-extend into the host long
type rather than sign-extending it.

Make the conversion routines use __get_user() and __set_user()
instead: this automatically picks up the signedness of the
field type and does the correct kind of sign or zero extension.
It also handles the possibility that the target struct is not
sufficiently aligned for the host's requirements.

In particular, this fixes a hang when running the Linux Test Project
mq_timedsend01 and mq_timedreceive01 tests: one of the test cases
sets the timeout to -1 and expects an EINVAL failure, but we were
setting a very long timeout instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:50:39 +03:00
Peter Maydell
d509eeb13c linux-user: Use safe_syscall for futex syscall
Use the safe_syscall wrapper for the futex syscall.

In particular, this fixes hangs when using programs that link
against the Boehm garbage collector, including the Mono runtime.

(We don't change the sys_futex() call in the implementation of
the exit syscall, because as the FIXME comment there notes
that should be handled by disabling signals, since we can't
easily back out if the futex were to return ERESTARTSYS.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:50:39 +03:00
Peter Maydell
6df9d38d33 linux-user: Use safe_syscall for pselect, select syscalls
Use the safe_syscall wrapper for the pselect and select syscalls.
Since not every architecture has the select syscall, we now
have to implement select in terms of pselect, which means doing
timeval<->timespec conversion.

(Five years on from the initial patch that added pselect support
to QEMU and a decade after pselect6 went into the kernel, it seems
safe to not try to support hosts with header files which don't
define __NR_pselect6.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:50:38 +03:00
Timothy E Baldwin
ffdcbe223d linux-user: Use safe_syscall for execve syscall
Wrap execve() in the safe-syscall handling. Although execve() is not
an interruptible syscall, it is a special case: if we allow a signal
to happen before we make the host$ syscall then we will 'lose' it,
because at the point of execve the process leaves QEMU's control.  So
we use the safe syscall wrapper to ensure that we either take the
signal as a guest signal, or else it does not happen before the
execve completes and makes it the other program's problem.

The practical upshot is that without this SIGTERM could fail to
terminate the process.

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-25-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: expanded commit message to explain in more detail why this is
 needed, and add comment about it too]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:50:38 +03:00
Timothy E Baldwin
4af80a3783 linux-user: Use safe_syscall for wait system calls
Use safe_syscall for waitpid, waitid and wait4 syscalls. Note that this
change allows us to implement support for waitid's fifth (rusage) argument
in future; for the moment we ignore it as we have done up til now.

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-18-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Adjust to new safe_syscall convention. Add fifth waitid syscall argument
 (which isn't present in the libc interface but is in the syscall ABI)]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:50:38 +03:00
Timothy E Baldwin
c10a07387b linux-user: Use safe_syscall for open and openat system calls
Restart open() and openat() if signals occur before,
or during with SA_RESTART.

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-17-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Adjusted to follow new -1-and-set-errno safe_syscall convention]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:50:38 +03:00
Timothy E Baldwin
50afd02b84 linux-user: Use safe_syscall for read and write system calls
Restart read() and write() if signals occur before, or during with SA_RESTART

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-15-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Update to new safe_syscall() convention of setting errno]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:50:38 +03:00
Timothy E Baldwin
4d330cee37 linux-user: Provide safe_syscall for fixing races between signals and syscalls
If a signal is delivered immediately before a blocking system call the
handler will only be called after the system call returns, which may be a
long time later or never.

This is fixed by using a function (safe_syscall) that checks if a guest
signal is pending prior to making a system call, and if so does not call the
system call and returns -TARGET_ERESTARTSYS. If a signal is received between
the check and the system call host_signal_handler() rewinds execution to
before the check. This rewinding has the effect of closing the race window
so that safe_syscall will reliably either (a) go into the host syscall
with no unprocessed guest signals pending or or (b) return
-TARGET_ERESTARTSYS so that the caller can deal with the signals.
Implementing this requires a per-host-architecture assembly language
fragment.

This will also resolve the mishandling of the SA_RESTART flag where
we would restart a host system call and not call the guest signal handler
until the syscall finally completed -- syscall restarting now always
happens at the guest syscall level so the guest signal handler will run.
(The host syscall will never be restarted because if the host kernel
rewinds the PC to point at the syscall insn for a restart then our
host_signal_handler() will see this and arrange the guest PC rewind.)

This commit contains the infrastructure for implementing safe_syscall
and the assembly language fragment for x86-64, but does not change any
syscalls to use it.

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-14-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM:
 * Avoid having an architecture if-ladder in configure by putting
   linux-user/host/$(ARCH) on the include path and including
   safe-syscall.inc.S from it
 * Avoid ifdef ladder in signal.c by creating new hostdep.h to hold
   host-architecture-specific things
 * Added copyright/license header to safe-syscall.inc.S
 * Rewrote commit message
 * Added comments to safe-syscall.inc.S
 * Changed calling convention of safe_syscall() to match syscall()
   (returns -1 and host error in errno on failure)
 * Added a long comment in qemu.h about how to use safe_syscall()
   to implement guest syscalls.
]
RV: squashed Peters "fixup! linux-user: compile on non-x86-64 hosts"
patch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-27 14:49:51 +03:00
Timothy E Baldwin
71a8f7fece linux-user: Add debug code to exercise restarting system calls
If DEBUG_ERESTARTSYS is set restart all system calls once. This
is pure debug code for exercising the syscall restart code paths
in the per-architecture cpu main loops.

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-10-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Add comment and a commented-out #define next to the commented-out
 generic DEBUG #define; remove the check on TARGET_USE_ERESTARTSYS;
 tweak comment message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:49:51 +03:00
Timothy E Baldwin
0284b03ba3 linux-user: Support for restarting system calls for x86 targets
Update the x86 main loop and sigreturn code:
 * on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
 * set all guest CPU state within signal.c code rather than passing it
   back out as the "return code" from do_sigreturn()
 * handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
   that the main loop should not touch EAX

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-5-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:49:49 +03:00
Peter Maydell
a3ca7bb259 linux-user: Consistently return host errnos from do_openat()
The function do_openat() is not consistent about whether it is
returning a host errno or a guest errno in case of failure.
Standardise on returning -1 with errno set (ie caller has
to call get_errno()).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
2016-05-27 14:49:48 +03:00
Timothy E Baldwin
2466119c95 linux-user: Check array bounds in errno conversion
Check array bounds in host_to_target_errno() and target_to_host_errno().

Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-2-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Add a lower-bound check, use braces on if(), tweak commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
2016-05-27 14:49:48 +03:00
Veronia Bahaa
f348b6d1a5 util: move declarations out of qemu-common.h
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)

Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Laurent Vivier
f894efd199 linux-user: add getrandom() syscall
getrandom() has been introduced in kernel 3.17 and is now used during
the boot sequence of Debian unstable (stretch/sid).

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-24 15:22:15 +02:00
Riku Voipio
13756fb008 linux-user: remove unavailable syscalls from aarch64
QEMU lists deprecated system call numbers in for Aarch64. These
are never enabled for Linux kernel, so don't define them in Qemu
either. Remove the ifdef around host_to_target_stat64 since
all architectures need it now.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23 21:25:10 +02:00
Peter Maydell
b6e17875f2 linux-user: Don't assert if guest tries shmdt(0)
Our implementation of shmat() and shmdt() for linux-user was
using "zero guest address" as its marker for "entry in the
shm_regions[] array is not in use". This meant that if the
guest did a shmdt(0) we would match on an unused array entry
and call page_set_flags() with both start and end addresses zero,
which causes an assertion failure.

Use an explicit in_use flag to manage the shm_regions[] array,
so that we avoid this problem.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Pavel Shamis <pasharesearch@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23 21:25:09 +02:00
Laurent Vivier
5089c7ce82 linux-user: fix realloc size of target_fd_trans.
target_fd_trans is an array of "TargetFdTrans *": compute size
accordingly. Use g_renew() as proposed by Paolo.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23 21:25:09 +02:00
Peter Maydell
d39594e9d9 linux-user: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-10-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
John Paul Adrian Glaubitz
5a53dc5042 linux-user: Add SOCKOP_sendmmsg and SOCKOP_recvmmsg socket call, wire them up.
Adds the definitions for the socket calls SOCKOP_sendmmsg
and SOCKOP_recvmmsg and wires them up with the rest of the code.
The necessary function do_sendrecvmmsg() is already present in
linux-user/syscall.c. After adding these two definitions and wiring
them up, I no longer receive an error message about the
unimplemented socket calls when running "apt-get update" on Debian
unstable running on qemu with glibc_2.21 on m68k.

Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-11 14:54:03 +02:00
Chen Gang
fad6c58a3d linux-user/syscall.c: Use SOL_SOCKET instead of level for setsockopt()
In this case, level is TARGET_SOL_SOCKET, but we need SOL_SOCKET for
setsockopt().

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-11 13:45:23 +02:00
Michael Tokarev
c0d3573632 linux-user: enable sigaltstack for all architectures
There is no reason to limit sigaltstack syscall to just a few
architectures and pretend it is not implemented for others.

If some architecture is not ready for this, that architecture
should be fixed instead.

This fixes LP#1516408.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:36:21 +02:00
Laurent Vivier
861d72cd28 linux-user: check fd is >= 0 in fd_trans_host_to_target_data/fd_trans_host_to_target_addr
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:20:35 +02:00
Laurent Vivier
0cf227229b linux-user: manage bind with a socket of SOCK_PACKET type.
This is obsolete, but if we want to use dhcp with an old distro (like debian
etch), we need it. Some users (like dhclient) use SOCK_PACKET with AF_PACKET
and the kernel allows that.

packet(7)

  In Linux 2.0, the only way to  get  a  packet  socket  was  by calling
  socket(AF_INET,  SOCK_PACKET,  protocol).   This is still supported but
  strongly deprecated.  The main difference between the  two methods  is
  that  SOCK_PACKET uses the old struct sockaddr_pkt to specify an inter‐
  face, which doesn't provide physical layer independence.

     struct sockaddr_pkt {
         unsigned short spkt_family;
         unsigned char  spkt_device[14];
         unsigned short spkt_protocol;
     };

  spkt_family contains the device type, spkt_protocol is the  IEEE 802.3
  protocol  type  as  defined  in <sys/if_ether.h> and spkt_device is the
  device name as a null-terminated string, for example, eth0.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:20:15 +02:00
Laurent Vivier
7b36f78274 linux-user: add a function hook to translate sockaddr
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:20:08 +02:00
Laurent Vivier
5d4d366585 linux-user: rename TargetFdFunc to TargetFdDataFunc, and structure fields accordingly
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:19:57 +02:00
Laurent Vivier
ff626f2d9e linux-user: SOCK_PACKET uses network endian to encode protocol in socket()
in PACKET(7) :

  packet_socket = socket(AF_PACKET, int socket_type, int protocol);
[...]
                                   protocol is the  IEEE  802.3 protocol
  number in network order.  See the <linux/if_ether.h> include file for a
  list of allowed protocols.  When protocol is  set  to htons(ETH_P_ALL)
  then all protocols are received.  All incoming packets of that protocol
  type will be passed to the packet socket before they are passed to the
  protocols implemented in the kernel.
[...]
Compatibility

  In Linux 2.0, the only way to  get  a  packet  socket  was  by  calling
  socket(AF_INET,  SOCK_PACKET,  protocol).

We need to tswap16() the protocol because on big-endian, the ABI is
waiting for, for instance for ETH_P_ALL, 0x0003 (big endian ==
network order), whereas on little-endian it is waiting for 0x0300.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 15:18:47 +02:00
Harmandeep Kaur
0e173b24b5 linux-user/syscall.c: malloc()/calloc() to g_malloc()/g_try_malloc()/g_new0()
Convert malloc()/ calloc() calls to g_malloc()/ g_try_malloc()/ g_new0()

All heap memory allocation should go through glib so that we can take
advantage of a single memory allocator and its debugging/tracing features.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 11:36:13 +02:00
Laurent Vivier
3e24bb3f12 linux-user: in poll(), if nfds is 0, pfd can be NULL
This problem appears with yum in Fedora 20 / PPC64 container.

test case:

    #include <stdio.h>
    #include <poll.h>

    int main(void)
    {
        int ret;

        ret = poll(NULL, 0, 1000);
        printf("%d\n", ret);
    }

target test environment: Fedora 20 / PPC64
host test environment: Ubuntu 14.0.2 / x86_64

original test result: -1

    13451 poll(0,0,1000,274886297496,268566664,268566648) = -1 errno=14 (Bad address)

patched test result: 0

    13536 poll(0,0,1000,274886297496,268566664,268566648) = 0

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 11:36:13 +02:00
Laurent Vivier
e36800c91a linux-user: add signalfd/signalfd4 syscalls
This patch introduces a system very similar to the one used in the kernel
to attach specific functions to a given file descriptor.

In this case, we attach a specific "host_to_target()" translator to the fd
returned by signalfd() to be able to byte-swap the signalfd_siginfo
structure provided by read().

This patch allows to execute the example program given by
man signalfd(2):

 #include <sys/signalfd.h>
 #include <signal.h>
 #include <unistd.h>
 #include <stdlib.h>
 #include <stdio.h>

 #define handle_error(msg) \
     do { perror(msg); exit(EXIT_FAILURE); } while (0)

 int
 main(int argc, char *argv[])
 {
     sigset_t mask;
     int sfd;
     struct signalfd_siginfo fdsi;
     ssize_t s;

     sigemptyset(&mask);
     sigaddset(&mask, SIGINT);
     sigaddset(&mask, SIGQUIT);

     /* Block signals so that they aren't handled
        according to their default dispositions */

     if (sigprocmask(SIG_BLOCK, &mask, NULL) == -1)
         handle_error("sigprocmask");

     sfd = signalfd(-1, &mask, 0);
     if (sfd == -1)
         handle_error("signalfd");

     for (;;) {
         s = read(sfd, &fdsi, sizeof(struct signalfd_siginfo));
         if (s != sizeof(struct signalfd_siginfo))
             handle_error("read");

         if (fdsi.ssi_signo == SIGINT) {
             printf("Got SIGINT\n");
         } else if (fdsi.ssi_signo == SIGQUIT) {
             printf("Got SIGQUIT\n");
             exit(EXIT_SUCCESS);
         } else {
             printf("Read unexpected signal\n");
         }
     }
 }

 $ ./signalfd_demo
 ^CGot SIGINT
 ^CGot SIGINT
 ^\Got SIGQUIT

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 11:36:12 +02:00
Thomas Huth
e9d49d518d linux-user/syscall: Replace g_malloc0 + memcpy with g_memdup
No need to use g_malloc0 to zero the memory if we memcpy to
the whole buffer afterwards anyway. Actually, there is even
a function which combines both steps, g_memdup, so let's use
this function here instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-11-06 15:42:38 +03:00
Stefan Weil
d1c002b6ae linux-user: Remove type casts to union type
Casting to a union type is a gcc (and clang) extension. Other compilers
might not support it. This is not a problem today, but the type casts
can be removed easily. Smatch now no longer complains like before:

linux-user/syscall.c:3190:18: warning: cast to non-scalar
linux-user/syscall.c:7348:44: warning: cast to non-scalar

Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:47 +03:00
Markus Armbruster
c78d65e8a7 linux-user: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).  Same Coccinelle semantic patch as in commit b45c03f.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:47 +03:00
Chen Gang
08703b9f7b linux-user/syscall.c: Add EAGAIN to host_to_target_errno_table for
Under Alpha host, EAGAIN is redefined to 35, so it need be remapped too.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:57:54 +03:00
Laurent Vivier
0f0426f343 linux-user: add name_to_handle_at/open_by_handle_at
This patch allows to run example given by open_by_handle_at(2):

      The following shell session demonstrates the use of these two programs:

           $ echo 'Can you please think about it?' > cecilia.txt
           $ ./t_name_to_handle_at cecilia.txt > fh
           $ ./t_open_by_handle_at < fh
           open_by_handle_at: Operation not permitted
           $ sudo ./t_open_by_handle_at < fh      # Need CAP_SYS_ADMIN
           Read 31 bytes
           $ rm cecilia.txt

       Now  we delete and (quickly) re-create the file so that it has the same
       content and (by chance) the  same  inode.[...]

           $ stat --printf="%i\n" cecilia.txt     # Display inode number
           4072121
           $ rm cecilia.txt
           $ echo 'Can you please think about it?' > cecilia.txt
           $ stat --printf="%i\n" cecilia.txt     # Check inode number
           4072121
           $ sudo ./t_open_by_handle_at < fh
           open_by_handle_at: Stale NFS file handle

See the man page for source code.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:44:46 +03:00
Timothy E Baldwin
93b4eff80a linux-user: Return target error number in do_fork()
Whilst calls to do_fork() are wrapped in get_errno() this does not
translate return values.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:40:12 +03:00
Jonathan Neuschäfer
ee1045877a linux-user: fix cmsg conversion in case of multiple headers
Currently, __target_cmsg_nxthdr compares a pointer derived from
target_cmsg against the msg_control field of target_msgh (through
subtraction).  This failed for me when emulating i386 code under x86_64,
because pointers in the host address space and pointers in the guest
address space were not the same.  This patch passes the initial value of
target_cmsg into __target_cmsg_nxthdr.

I found and fixed two more related bugs:
- __target_cmsg_nxthdr now returns the new cmsg pointer instead of the
  old one.
- tgt_space (in host_to_target_cmsg) doesn't count "sizeof (struct
  target_cmsghdr)" twice anymore.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:39:43 +03:00
Stefan Brüns
59baae9a62 linux-user: remove MAX_ARG_PAGES limit
Instead of creating a temporary copy for the whole environment and
the arguments, directly copy everything to the target stack.

For this to work, we have to change the order of stack creation and
copying the arguments.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:29:11 +03:00
Chen Gang
704eff6c23 linux-user: Conditionalize syscalls which are not defined in tilegx
Some of architectures (e.g. tilegx), several syscall macros are not
supported, so switch them.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP457D6FC9B2B9BA87AEB22CB9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15 07:41:35 -07:00
Peter Maydell
a2aa09e181 * Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
 * cutils: qemu_strto* wrappers
 * iohandler.c simplification
 * Many other fixes and misc patches.
 
 And some MTTCG work (with Emilio's fixes squashed):
 * Signal-free TCG kick
 * Removing spinlock in favor of QemuMutex
 * User-mode emulation multi-threading fixes/docs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
 NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
 fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
 dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
 JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
 7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
 =nB06
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.

And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs

# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (44 commits)
  cutils: work around platform differences in strto{l,ul,ll,ull}
  cpu-exec: fix lock hierarchy for user-mode emulation
  exec: make mmap_lock/mmap_unlock globally available
  tcg: comment on which functions have to be called with mmap_lock held
  tcg: add memory barriers in page_find_alloc accesses
  remove unused spinlock.
  replace spinlock by QemuMutex.
  cpus: remove tcg_halt_cond and tcg_cpu_thread globals
  cpus: protect work list with work_mutex
  scripts/dump-guest-memory.py: fix after RAMBlock change
  configure: Add support for jemalloc
  add macro file for coccinelle
  configure: factor out adding disas configure
  vhost-scsi: fix wrong vhost-scsi firmware path
  checkpatch: remove tests that are not relevant outside the kernel
  checkpatch: adapt some tests to QEMU
  CODING_STYLE: update mixed declaration rules
  qmp: Add example usage of strto*l() qemu wrapper
  cutils: Add qemu_strtoull() wrapper
  cutils: Add qemu_strtoll() wrapper
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 16:13:16 +01:00
Veres Lajos
67cc32ebfd typofixes - v4
Signed-off-by: Veres Lajos <vlajos@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:45:43 +03:00
Emilio G. Cota
7090376369 linux-user: call rcu_(un)register_thread on pthread_(exit|create)
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1440375847-17603-13-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09 15:34:54 +02:00
Laurent Vivier
45c874ebba linux-user: ioctl() command type is int
When executing a 64bit target chroot on 64bit host,
the ioctl() command can mismatch.

It seems the previous commit doesn't solve the problem in
my case:

    9c6bf9c7 linux-user: Fix ioctl cmd type mismatch on 64-bit targets

For example, a ppc64 chroot on an x86_64 host:

bash-4.3# ls
Unsupported ioctl: cmd=0x80087467
Unsupported ioctl: cmd=0x802c7415

The origin of the problem is in syscall.c:do_ioctl().

    static abi_long do_ioctl(int fd, abi_long cmd, abi_long arg)

In this case (ppc64) abi_long is long (on the x86_64), and

    cmd = 0x0000000080087467

then
    if (ie->target_cmd == cmd)

target_cmd is int, so target_cmd = 0x80087467
and to compare an int with a long, the sign is extended to 64bit,
so the comparison is:

    if (0xffffffff80087467 == 0x0000000080087467)

which doesn't match whereas it should.

This patch uses int in the case of the target command type
instead of abi_long.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-06-16 09:37:17 +03:00
Peter Maydell
876e23cb2e linux-user: use __get_user and __put_user in cmsg conversions
The target payloads in cmsg conversions may not have the alignment
required by the host. Using the get_user and put_user functions is
the easiest way to handle this and also do the byte-swapping we
require.

(Note that prior to this commit target_to_host_cmsg was incorrectly
using __put_user() rather than __get_user() for the SCM_CREDENTIALS
conversion, which meant it wasn't getting the benefit of the
misalignment handling.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-06-16 08:21:01 +03:00
Peter Maydell
c2aeb2586b linux-user: Fix length handling in host_to_target_cmsg
The previous code for handling payload length when converting
cmsg structures from host to target had a number of problems:
 * we required the msg->msg_controllen to declare the buffer
   to have enough space for final trailing padding (we were
   checking against CMSG_SPACE), whereas the kernel does not
   require this, and common userspace code assumes this. (In
   particular, glibc's "try to talk to nscd" code that it will
   run on startup will receive a cmsg with a 4 byte payload and
   only allocate 4 bytes for it, which was causing us to do
   the wrong thing on architectures that need 8-alignment.)
 * we weren't correctly handling the fact that the SO_TIMESTAMP
   payload may be larger for the target than the host
 * we weren't marking the messages with MSG_CTRUNC when we did
   need to truncate a message that wasn't truncated by the host,
   but were instead logging a QEMU message; since truncation is
   always the result of a guest giving us an insufficiently
   sized buffer, we should report it to the guest as the kernel
   does and don't log anything

Rewrite the parts of the function that deal with length to
fix these issues, and add a comment in target_to_host_cmsg
to explain why the overflow logging it does is a QEMU bug,
not a guest issue.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-06-16 08:21:01 +03:00
Alexander Graf
8be656b87c linux-user: Allocate thunk size dynamically
We store all struct types in an array of static size without ever
checking whether we overrun it. Of course some day someone (like me
in another, ancient ALSA enabling patch set) will run into the limit
without realizing it.

So let's make the allocation dynamic. We already know the number of
structs that we want to allocate, so we only need to pass the variable
into the respective piece of code.

Also, to ensure we don't accidently overwrite random memory, add some
asserts to sanity check whether a thunk is actually part of our array.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-06-15 11:36:58 +03:00
Paolo Bonzini
a59629fcc6 rcu: do not create thread in pthread_atfork callback
If QEMU forks after the CPU threads have been created, qemu_mutex_lock_iothread
will not be able to do qemu_cpu_kick_thread.  There is no solution other than
assuming that forks after the CPU threads have been created will end up in an
exec.  Forks before the CPU threads have been created (such as -daemonize)
have to call rcu_after_fork manually.

Notably, the oxygen theme for GTK+ forks and shows a "No such process" error
without this patch.

This patch can be reverted once the iothread loses the "kick the TCG thread"
magic.

User-mode emulation does not use the iothread, so it can also call
rcu_after_fork.

Reported by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-01 10:06:38 +02:00
Andreas Schwab
17644b3627 linux-user: fix emulation of splice syscall
The second and fourth argument are in/out parameters, store them back
after the syscall.  Also, the fourth argument was mishandled, and EFAULT
handling was missing.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-03-22 15:18:51 +02:00
Chen Gang S
dec0473dc6 linux-user/syscall.c: do_ioctl_dm: Need to call unlock_user() before going to failure return in default case
In abi_long do_ioctl_dm(), after lock_user() call, the code does
not call unlock_user() before going to failure return in default case.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10 09:27:20 +03:00
Chen Gang S
71ec7cef01 linux-user/syscall.c: Fix typo issue for using target_vec[i].iov_len instead of target_vec[i].iov_base
It is only a typo issue, need use tswapal(target_vec[i].iov_len) for the
len.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10 09:27:20 +03:00
Chen Gang S
7eff518b6c linux-user/syscall.c: lock_iovec: unlock vec[i] in failure processing code block
When failure occurs during locking of vec[i], we also need to unlock all
already locked vec[i] in failure processing code block before return.

Code in unlock_user() checks vec[i].iov_base for NULL, so there's no
need not check it .

If error is EFAULT when "i == 0", vec[i].iov_base is NULL, we can just
skip it, so can still use "while (--i >= 0)" loop condition.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10 09:27:20 +03:00
Alex Suykov
30b8b68eb5 linux-user: support target-to-host SCM_CREDENTIALS
When passing ancillary data through a unix socket, handle
credentials properly instead of doing a simple copy and
issuing a warning.

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-01-27 22:33:57 +02:00
Ed Swierk
9c6bf9c7d7 linux-user: Fix ioctl cmd type mismatch on 64-bit targets
linux-user passes the cmd argument of the ioctl syscall as a signed long,
but compares it to an unsigned int when iterating through the ioctl_entries
list.  When the cmd is a large value like 0x80047476 (TARGET_TIOCSWINSZ on
mips64) it gets sign-extended to 0xffffffff80047476, causing the comparison
to fail and resulting in lots of spurious "Unsupported ioctl" errors.
Changing the target_cmd field in the ioctl_entries list to a signed int
causes those values to be sign-extended as well during the comparison.

Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-01-27 22:33:57 +02:00
Felix Janda
95018018ca linux-user: translate resource also for prlimit64
The resource argument is translated from host to target for
[gs]etprlimit but not for prlimit64. Fix this.

Signed-off-by: Felix Janda <felix.janda@posteo.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-01-27 22:33:57 +02:00
Alexander Graf
aecc88616a linux-user: Fix up timer id handling
When creating a timer handle, we give the timer id a special magic offset
of 0xcafe0000. However, we never mask that offset out of the timer id before
we start using it to dereference our timer array. So we always end up aborting
timer operations because the timer id is out of bounds.

This was not an issue before my patch e52a99f756 ("linux-user: Simplify
timerid checks on g_posix_timers range") because before we would blindly mask
anything above the first 16 bits.

This patch simplifies the code around timer id creation by introducing a proper
target_timer_id typedef that is s32, just like Linux has it. It also changes the
magic offset to a value that makes all timer ids be positive.

Reported-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-11-11 08:13:09 +02:00
Riku Voipio
d80a190594 linux-user: don't include timerfd if not needed
Without this, builds on older systems fail with:

qemu/linux-user/syscall.c:61:25: warning: sys/timerfd.h: No such file or directory

v2: fix the usual case where CONFIG_TIMERFD is enabled..

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06 21:52:46 +03:00
Alexander Graf
e52a99f756 linux-user: Simplify timerid checks on g_posix_timers range
We check whether the passed in timer id is negative on all calls
that involve g_posix_timers.

However, these checks are bogus. First off we limit the timer_id to
16 bits which is not what Linux does. Then we check whether it's negative
which it can't be because we masked it.

We can safely remove the masking. For the negativity check we can just
treat the timerid as unsigned and only check for upper boundaries.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06 21:52:45 +03:00
Alexander Graf
a59b5e35d1 linux-user: Convert blkpg to use a special subop handler
The blkpg ioctl can take different payloads depending on the opcode in
its payload structure. Create a new special ioctl handler that can only
deal with partition style ones for now.

This patch fixes running parted for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06 21:52:45 +03:00
zhanghailiang
680dfde919 linux-user: fix file descriptor leaks
Handle variable "fd_orig" going out of scope leaks the handle.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-24 13:18:28 +04:00
zhanghailiang
29e03fcb62 linux-user: check return value of malloc()
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
29560a6cb7 linux-user: writev Partial Writes
Although not technically not required by POSIX, the writev system call will
typically write out its buffers individually.  That is, if the first buffer
is written successfully, but the second buffer pointer is invalid, then
the first chuck will be written and its size is returned.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
6f6a40328b linux-user: Support target-to-host translation of mlockall argument
The argument to the mlockall system call is not necessarily the same on
all platforms and thus may require translation prior to passing to the
host.

For example, PowerPC 64 bit platforms define values for MCL_CURRENT
(0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms
(0x1 and 0x2, respectively)

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
8fbe8fdfbc linux-user: clock_nanosleep errno Handling on PPC
The clock_nanosleep syscall is unusual in that it returns positive
numbers in error handling situations, versus returning -1 and setting
errno, or returning a negative errno value.  On POWER, the kernel will
set the SO bit of CR0 to indicate failure in a syscall.  QEMU has
generic handling to do this for syscalls with standard return values.

Add special case code for clock_nanosleep to handle CR0 properly.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
d4290c40a4 linux-user: Detect fault in sched_rr_get_interval
Properly detect a fault when attempting to store into an invalid
struct timespec pointer.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
a1d5c5b25d linux-user: Handle NULL sched_param argument to sched_*
The sched_getparam, sched_setparam and sched_setscheduler system
calls take a pointer argument to a sched_param structure.  When
this pointer is null, errno should be set to EINVAL.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
edcc5f9dc3 linux-user: Detect Negative Message Sizes in msgsnd System Call
The msgsnd system call takes an argument that describes the message
size (msgsz) and is of type size_t.  The system call should set
errno to EINVAL in the event that a negative message size is passed.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
b6ce1f6b90 linux-user: Conditionally Pass Attribute Pointer to mq_open()
The mq_open system call takes an optional struct mq_attr pointer
argument in the fourth position.  This pointer is used when O_CREAT
is specified in the flags (second) argument.  It may be NULL, in
which case the queue is created with implementation defined attributes.

Change the code to properly handle the case when NULL is passed in the
arg4 position.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Tom Musta
37ed09560c linux-user: Make ipc syscall's third argument an abi_long
For those target ABIs that use the ipc system call (e.g. POWER),
the third argument is used in the shmat path as a pointer.  It
therefore must be declared as an abi_long (versus int) so that
the address bits are not lost in truncation.  In fact, all arguments
to do_ipc should be declared as abit_long.

In fact, it makes more sense for all of the arguments to be declaried
as abi_long (except call).

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Tom Musta
5464baecf5 linux-user: Properly Handle semun Structure In Cross-Endian Situations
The semun union used in the semctl system call contains both an int (val) and
pointers.  In cross-endian situations on 64 bit targets, the value passed to
semctl is an 8 byte (abi_long) value and thus does not have the 4-byte val
field in the correct location.  In order to rectify this, the other half
of the union must be accessed.  This is achieved in code by performing
a byte swap on the entire 8 byte union, followed by a 4-byte swap of the
first half.

Also, eliminate an extraneous (dead) line of code that sets target_su.val in
the IPC_SET/IPC_GET case.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Tom Musta
5d2fa8ebb4 linux-user: Dereference Pointer Argument to ipc/semctl Sys Call
When the ipc system call is used to wrap a semctl system call,
the ptr argument to ipc needs to be dereferenced prior to passing
it to the semctl handler.  This is because the fourth argument to
semctl is a union and not a pointer to a union.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Tom Musta
035273440b linux-user: PPC64 semid_ds Doesnt Include _unused1 and _unused2
The 64 bit PowerPC platforms eliminate the _unused1 and _unused2
elements of the semid_ds structure from <sys/sem.h>.  So eliminate
these from the target_semid_ds structure.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Riku Voipio
9af5c906d1 linux-user: add setns and unshare
Add support for the setns and unshare syscalls, trivially passed through to
the host. Based on patches by Paul Burton, added configure check.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Paul Burton
ab31cda327 linux-user: support ioprio_{get, set} syscalls
Add support for the ioprio_get & ioprio_set syscalls, allowing their
use by target programs.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Riku Voipio
518343413f linux-user: support timerfd_{create, gettime, settime} syscalls
Adds support for the timerfd_create, timerfd_gettime & timerfd_settime
syscalls, allowing use of timerfds by target programs.

v2: By Riku - added configure check for timerfd and ifdefs
for benefit of old distributions like RHEL5.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:33 +03:00
Mike Frysinger
f17f4989fa linux-user: fix readlink handling with magic exe symlink
The current code always returns the length of the path when it should
be returning the number of bytes it wrote to the output string.

Further, readlink is not supposed to append a NUL byte, but the current
snprintf logic will always do just that.

Even further, if you pass in a length of 0, you're suppoesd to get back
an error (EINVAL), but the current logic just returns 0.

Further still, if there was an error reading the symlink, we should not
go ahead and try to read the target buffer as it is garbage.

Simple test for the first two issues:
$ cat test.c
int main() {
    char buf[50];
    size_t len;
    for (len = 0; len < 10; ++len) {
        memset(buf, '!', sizeof(buf));
        ssize_t ret = readlink("/proc/self/exe", buf, len);
        buf[20] = '\0';
        printf("readlink(/proc/self/exe, {%s}, %zu) = %zi\n", buf, len, ret);
    }
    return 0;
}

Now compare the output of the native:
$ gcc test.c -o /tmp/x
$ /tmp/x
$ strace /tmp/x

With what qemu does:
$ armv7a-cros-linux-gnueabi-gcc test.c -o /tmp/x -static
$ qemu-arm /tmp/x
$ qemu-arm -strace /tmp/x

Signed-off-by: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:33 +03:00
Peter Maydell
c065976f2b linux-user: Fix conversion of sigevent argument to timer_create
There were a number of bugs in the conversion of the sigevent
argument to timer_create from target to host format:
 * signal number not converted from target to host
 * thread ID not copied across
 * sigev_value not copied across
 * we never unlocked the struct when we were done

Between them, these problems meant that SIGEV_THREAD_ID
timers (and the glibc-implemented SIGEV_THREAD timers which
depend on them) didn't work.

Fix these problems and clean up the code a little by pulling
the struct conversion out into its own function, in line with
how we convert various other structs. This allows the test
program in bug LP:1042388 to run.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:33 +03:00
Riku Voipio
0b2effd744 linux-user: redirect openat calls
While Mikhail fixed /proc/self/maps, it was noticed openat calls are
not redirected currently. Some archs don't have open at all, so
openat needs to be redirected.

Fix this by consolidating open/openat code to do_openat - open
is implemented using openat(AT_FDCWD, ... ), which according
to open(2) man page is identical.

Since all targets now have openat, remove the ifdef around sys_openat
and openat: case in do_syscall.

Cc: Mikhail Ilin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:33 +03:00
Mikhail Ilyin
d67f4aaae8 linux-user: /proc/self/maps content
Build /proc/self/maps doing a match against guest memory translation table.
Output only that map records which are valid for guest memory layout.

Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:33 +03:00
Joakim Tjernlund
2dd08dfd9a alloca one extra byte sockets
target_to_host_sockaddr() may increase the lenth with 1 byte
for AF_UNIX sockets so allocate 1 extra byte.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15 16:28:36 +03:00
Joakim Tjernlund
33a29b51c9 linux-user: handle AF_PACKET sockaddrs in target_to_host_sockaddr
Implement conversion of the AF_PACKET sockaddr subtype
in target_to_host_sockaddr.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15 16:28:25 +03:00
Joakim Tjernlund
451aaf688c qemu-user: Impl. setsockopt(SO_BINDTODEVICE)
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15 16:28:20 +03:00
Paul Burton
ca56f5b596 linux-user: support the KDSIGACCEPT ioctl
Add a definition of the KDSIGACCEPT ioctl & allow its use by target
programs.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:59 +03:00
Paul Burton
b67d80311a linux-user: allow NULL tv argument for settimeofday
The tv argument to the settimeofday syscall is allowed to be NULL, if
the program only wishes to provide the timezone. QEMU previously
returned -EFAULT when tv was NULL. Instead, execute the syscall &
provide NULL to the kernel as the target program expected.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:59 +03:00
Paul Burton
ef4467e911 linux-user: respect timezone for settimeofday
The settimeofday syscall accepts a tz argument indicating the desired
timezone to the kernel. QEMU previously ignored any argument provided
by the target program & always passed NULL to the kernel. Instead,
translate the argument & pass along the data userland provided.

Although this argument is described by the settimeofday man page as
obsolete, it is used by systemd as of version 213.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:59 +03:00
Paul Burton
356d771b30 linux-user: allow NULL arguments to mount
Calls to the mount syscall can legitimately provide NULL as the value
for the source of filesystemtype arguments, which QEMU would previously
reject & return -EFAULT to the target program. An example of this is
remounting an already mounted filesystem with different properties.

Instead of rejecting such syscalls with -EFAULT, pass NULL along to the
kernel as the target program expects.

Additionally this patch fixes a potential memory leak when DEBUG_REMAP
is enabled and lock_user_string fails on the target or filesystemtype
arguments but a prior argument was non-NULL and already locked.

Since the patch already touched most lines of the TARGET_NR_mount case,
it fixes the indentation & coding style for good measure.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:59 +03:00
Paul Burton
82d0fe6b7a linux-user: support SO_PASSSEC setsockopt option
Translate the SO_PASSSEC option to setsockopt to the host value &
perform the syscall as expected, allowing use of the option by target
programs.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:59 +03:00
Paul Burton
d79b6cc435 linux-user: support SO_{SND, RCV}BUFFORCE setsockopt options
Translate the SO_SNDBUFFORCE & SO_RCVBUFFORCE options to setsockopt to
the host values & perform the syscall as expected, allowing use of those
options by target programs.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:58 +03:00
Paul Burton
aec1ca411e linux-user: support SO_ACCEPTCONN getsockopt option
Translate the SO_ACCEPTCONN option to the host value & execute the
syscall as expected.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:58 +03:00
Paul Burton
8289d11281 linux-user: translate the result of getsockopt SO_TYPE
QEMU previously passed the result of the host syscall directly to the
target program. This is a problem if the host & target have different
representations of socket types, as is the case when running a MIPS
target program on an x86 host. Introduce a host_to_target_sock_type
helper function mirroring the existing target_to_host_sock_type, and
call it to translate the value provided by getsockopt when called for
the SO_TYPE option.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:58 +03:00
Wim Vander Schelden
76b9424550 linux-user: added fake open() for /proc/self/cmdline
Signed-off-by: Wim Vander Schelden <wim@fixnum.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:58 +03:00
Christophe Lyon
e8efd8e71f Add support for MAP_NORESERVE mmap flag.
mmap_flags_tbl contains a list of mmap flags, and how to map them to
the target. This patch adds MAP_NORESERVE, which was missing to the
list.

Signed-off-by: Christophe Lyon <christophe.lyon@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:58 +03:00
Petar Jovanovic
d279279e2b target-mips: implement UserLocal Register
From MIPS documentation (Volume III):

UserLocal Register (CP0 Register 4, Select 2)
Compliance Level: Recommended.

The UserLocal register is a read-write register that is not interpreted by
the hardware and conditionally readable via the RDHWR instruction.

This register only exists if the Config3-ULRI register field is set.

Privileged software may write this register with arbitrary information and
make it accessible to unprivileged software via register 29 (ULR) of the
RDHWR instruction. To do so, bit 29 of the HWREna register must be set to a
1 to enable unprivileged access to the register.

Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-06-18 18:10:47 +02:00
Ed Swierk
480eda2eda linux-user: Return correct errno for unsupported netlink socket
This fixes "Cannot open audit interface - aborting." when the
EAFNOSUPPORT errno differs between the target and host
architectures (e.g. mips target and x86_64 host).

Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-17 09:21:41 +03:00
Peter Maydell
be3bd286bc linux-user: Don't overrun guest buffer in sched_getaffinity
If the guest's "long" type is smaller than the host's, then
our sched_getaffinity wrapper needs to round the buffer size
up to a multiple of the host sizeof(long). This means that when
we copy the data back from the host buffer to the guest's
buffer there might be more than we can fit. Rather than
overflowing the guest's buffer, handle this case by returning
EINVAL or ignoring the unused extra space, as appropriate.

Note that only guests using the syscall interface directly might
run into this bug -- the glibc wrappers around it will always
use a buffer whose size is a multiple of 8 regardless of guest
architecture.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-17 09:21:41 +03:00
Petar Jovanovic
a39fb273bd linux-user: fix getrusage and wait4 failures with invalid rusage struct
Implementations of system calls getrusage and wait4 have not previously
handled correctly cases when incorrect address of struct rusage is
passed.
This change makes sure return values are correctly set for these cases.

Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-05 15:21:05 +03:00
Riku Voipio
6d30db19ca linux-user: move uname functions to uname.c
Make syscall.c slightly smaller by moving uname-related
functions to uname.c.

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02 21:59:36 +03:00
Riku Voipio
18cb008865 linux-user: rename cpu-uname -> uname
To move more uname related functions out of syscall.c,
rename cpu-uname.{c,h} to uname.{c.h}

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02 21:59:36 +03:00
Natanael Copa
34d6086236 linux-user: avoid using glibc internals in _syscall5 and in definition of target_sigevent struct
Use the public sigset_t instead of the glibc specific internal
__sigset_t in _syscall.

Calculate the sigevent pad size is calculated in similar way as kernel
does it instead of using glibc internal field _pad.

This is needed for building with musl libc.

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-02 21:59:28 +03:00
James Hogan
a29e5ba21f linux-user: Handle arches with llseek instead of _llseek
Recently merged kernel ports (such as OpenRISC and Meta) have an llseek
system call instead of _llseek. This is handled for the host
architecture by defining __NR__llseek as __NR_llseek, but not for the
target architecture.

Handle it in the same way for these architectures, defining
TARGET_NR__llseek as TARGET_NR_llseek.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Jia Liu <proljc@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02 21:59:28 +03:00
Huw Davies
4bc2975698 linux-user: Add support for SCM_CREDENTIALS.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02 21:59:28 +03:00
Huw Davies
52b6549442 linux-user: Move if-elses to a switch statement.
This makes adding more message types cleaner.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02 21:59:27 +03:00
Maxim Ostapenko
aa07f5ecf9 linux-user: Add /proc/self/exe open forwarding
QEMU already supports /proc/self/{maps,stat,auxv} so addition of
/proc/self/exe is rather trivial.

Fixes https://bugs.launchpad.net/qemu/+bug/1299190

Signed-off-by: Maxim Ostapenko <m.ostapenko@partner.samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02 21:59:27 +03:00
Petar Jovanovic
d25295d4ef linux-user: pass correct host flags to accept4()
Flags NONBLOCK and CLOEXEC can have different values on the host and the
guest, so set correct host values before calling accept4().

This fixes several issues with accept4 system call and user-mode of QEMU.

Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-04-01 09:17:19 +03:00
Peter Maydell
ec864874bd linux-user: Fix build if headers don't define _LINUX_CAPABILITY_VERSION_1
Older kernel headers don't define _LINUX_CAPABILITY_VERSION_1.
Switch to using the older _LINUX_CAPABILITY_VERSION; newer headers
still define this for source compatibility.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Acked-by: Riku Voipio <riku.voipio@iki.fi>
2014-03-19 18:19:57 +00:00
Peter Maydell
e0eb210ec0 linux-user: Implement capget, capset
Implement the capget and capset syscalls. This is useful because
simple programs like 'ls' try to use it in AArch64, and otherwise
we emit a lot of noise about it being unimplemented.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-03-17 15:26:58 +02:00
Alex Barcelo
1c275925bf signal: added a wrapper for sigprocmask function
Create a wrapper for signal mask changes initiated by the guest;
(this includes syscalls and also the sigreturns from signal.c)
this will give us a place to put code which prevents the guest
from changing the handling of signals used by QEMU itself
internally.

The wrapper is called from all the guest-initiated sigprocmask, but
is not called from internal qemu sigprocmask calls.

Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu>
[PMM: Added calls to wrapper for sigprocmask uses in signal.c
when setting the signal mask on entry and exit from signal
handlers, since these also are guest-provided signal masks.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-03-17 11:44:32 +02:00
Andreas Schwab
8d5d30046b linux-user: implement F_[GS]ETOWN_EX
F_GETOWN is replaced by F_GETOWN_EX inside the glibc fcntl wrapper

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-03-17 11:44:31 +02:00
Peter Maydell
3b899ea7d4 linux-user: Don't return uninitialized value for atomic_barrier syscall
QEMU's implementation of the m68k atomic_barrier syscall, like the kernel's,
is just a no-op. However we still need to return a result code from it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-03-17 11:44:31 +02:00
Andreas Färber
0429a97195 cpu: Move opaque field from CPU_COMMON to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:47 +01:00
Petar Jovanovic
974a196d7f linux-user: translate signal number on return from sigtimedwait
On success, sigtimedwait() returns a signal number that needs to be
translated from a host value to a target value.

This change also fixes issues with sigwait (that is implemented using
sigtimedwait()).

Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-03 23:08:14 +02:00
Alexander Graf
f19e00d776 linux-user: Implement sendmmsg syscall
Glibc when built for newer kernels assumes that the sendmmsg syscall is
available. Without it, dns resolution simply fails to work.

Wrap the syscall with existing infrastructure so that we don't have a host
dependency on sendmmsg.

To avoid locking the same area of guest memory twice (which will break if
DEBUG_REMAP is defined) we pull the lock/unlock part of do_sendrecvmsg()
out into its own function so the actual implementation can be shared.

Signed-off-by: Alexander Graf <agraf@suse.de>
[PMM: add recvmmsg support;
 handle errors (which also implies support for non-blocking operations);
 cap the vector length as the kernel implementation does;
 don't lock guest memory twice;
 support MSG_WAITFORONE flag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-03-03 23:08:09 +02:00
Peter Maydell
76ca310a19 linux-user: Fix getresuid, getresgid if !USE_UID16
The size of the UID/GID types depends on whether USE_UID16 is
defined. Define a new put_user_id() which writes a uid/gid
type to guest memory. This fixes getresuid and getresgid, which
were always storing 16 bits even if the uid type was 32 bits.

Reported-by: Michael Matz <matz@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-03-03 23:03:31 +02:00
Peter Maydell
69d4c703a5 linux-user: Fix error handling in target_to_host_semarray()
Fix two issues in error handling in target_to_host_semarray():
 * don't leak the host_array buffer if lock_user fails
 * return an error if malloc() fails

v2: added missing * -Riku Voipio

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-02-19 12:29:23 +02:00
Andreas Färber
fff8c539bd linux-user: Implement BLKPG ioctl
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-02-19 12:29:23 +02:00
Peter Maydell
501bb4b0cb linux-user: Fix error handling in lock_iovec()
In lock_iovec() if lock_user() failed we were doing an unlock_user
but not a free(vec), which is the wrong way round. We were also
assuming that free() and unlock_user() don't touch errno, which
is not guaranteed. Fix both these problems.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-02-18 16:54:06 +02:00
Michael Tokarev
62dc90c668 linux-user: refactor do_socketcall()
Refactor do_socketcall() to do argument conversion/checking first,
according to a lookup table (which call has how many args) and
by calling the right function second with ready-to-go arguments.

This ensures that all arguments are handled as abi_long, according
to socketcall prototype, and simplifies argument handling alot too.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-15 16:10:25 +04:00
Pavel Zbitskiy
a39ca6a124 linux-user: fixed recvfrom() addrlen
addrlen parameter of recvfrom() of type socklen_t* was read into
variable of type socklen_t, that caused zeroing out of upper 4 bytes
when running s390x on top of x86_64. This patch changes addrlen type
to abi_ulong.

Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-01-15 23:36:13 +04:00
Pavel Zbitskiy
fe54b24930 linux-user: fixed getsockopt() optlen
optlen parameter of getsockopt() of type socklen_t* was read into
variable of type socklen_t, that caused zeroing out of upper 4 bytes
when running s390x on top of x86_64. This patch changes optlen type
to abi_ulong.

Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-01-15 23:36:03 +04:00
André Hentschel
b9d36eb2c7 linux-user: Support the accept4 socketcall
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Erik de Castro Lopo <erikd@mega-nerd.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-01-10 08:51:36 +02:00
Petar Jovanovic
a29267846a linux-user: pass correct parameter to do_shmctl()
Fix shmctl issue by passing correct parameter buf to do_shmctl().

Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-11-29 11:42:14 +02:00
Petar Jovanovic
55a2b1631f linux-user: create target_structs header to place ipc_perm and shmid_ds
Creating target_structs header in linux-user/$arch/ and making
target_ipc_perm and target_shmid_ds its first inhabitants.
The struct defintions may/should be further fine-tuned by arch maintainers.

Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-11-29 11:42:04 +02:00
Erik de Castro Lopo
f4f1e10a58 linux-user: Implement handling of 5 POSIX timer syscalls.
Implement timer_create, timer_settime, timer_gettime, timer_getoverrun
and timer_delete.

Signed-off-by: Erik de Castro Lopo <erikd@mega-nerd.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-11-29 10:58:16 +02:00
Stefan Weil
20d155bc90 linux-user: Fix stat64 syscall for SPARC64
Some targets use a stat64 structure for the stat64 syscall while others
use a stat structure. SPARC64 used the wrong kind.

Instead of extending the conditional compilation in syscall.c, now a
macro TARGET_HAS_STRUCT_STAT64 is defined whenever a target has a
target_stat64.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Erik de Castro Lopo <erikd@mega-nerd.com>
2013-11-07 07:02:44 +01:00
Edgar E. Iglesias
53d09b761f linux-user: Handle SOCK_CLOEXEC/NONBLOCK if unavailable on host
If the host lacks SOCK_CLOEXEC, bail out with -EINVAL.
If the host lacks SOCK_ONONBLOCK, try to emulate it with fcntl()
and O_NONBLOCK.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-09-24 10:47:07 +03:00
Riku Voipio
89aaf1a6ad [v2] linux-user: implement m68k atomic syscalls
With nptl enabled, atomic_cmpxchg_32 and atomic_barrier
system calls are needed. This patch enabled really dummy
versions of the system calls, modeled after the m68k
kernel code.

With this patch I am able to execute m68k binaries
with qemu linux-user (busybox compiled for coldfire).

[v2] que an segfault instead of returning a EFAULT
to keep in line with kernel code.

Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-09-24 10:47:07 +03:00
Petar Jovanovic
dbf4f7965a linux-user: correct how SOL_SOCKET is converted from target to host and back
Previous implementation does not take into account that SOL_SOCKET constant
can be arch specific. This change fixes some issues with sendmsg/recvmsg.

Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-09-24 10:47:07 +03:00
Laurent Vivier
0d78b3b5b1 linux-user: add some IPV6 commands in setsockop()
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-09-24 10:47:07 +03:00
Laurent Vivier
f57d419241 linux-user: Add setsockopt(SO_ATTACH_FILTER)
This is needed to be able to run dhclient.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-09-24 10:47:06 +03:00
Laurent Vivier
de6b993377 linux-user: convert /proc/net/route when endianess differs
This patch allows to have IP addresses in correct order
in the case of "netstat -nr" when the endianess of the
guest differs from one of the host.

For instance, an m68k guest on an x86_64 host:

WITHOUT this patch:

$ netstat -nr
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
0.0.0.0         1.3.0.10        0.0.0.0         UG        0 0          0 eth0
0.3.0.10        0.0.0.0         0.255.255.255   U         0 0          0 eth0
$ cat /proc/net/route
Iface	Destination	Gateway 	Flags	RefCnt	Use	Metric	Mask	MTU	Window	IRTT

eth0	00000000	0103000A	0003	0	0	0	000000000	0	0
eth0	0003000A	00000000	0001	0	0	0	00FFFFFF0	0	0

WITH this patch:

$ netstat -nr
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
0.0.0.0         10.0.3.1        0.0.0.0         UG        0 0          0 eth0
10.0.3.0        0.0.0.0         255.255.255.0   U         0 0          0 eth0
$ cat /proc/net/route
Iface	Destination	Gateway 	Flags	RefCnt	Use	Metric	Mask	MTU	Window	IRTT
eth0	00000000	0a000301	0003	0	0	0	000000000	0	0
eth0	0a000300	00000000	0001	0	0	0	ffffff000	0	0

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-09-24 10:47:06 +03:00
Richard Henderson
8070e7be8b alpha-linux-user: Fix umount syscall numbers
It has been pointed out on LKML that the alpha umount syscall numbers
are named wrong, and a patch to rectify that has been posted for 3.11.

Glibc works around this by treating NR_umount as NR_umount2 if
NR_oldumount exists.  That's more complicated than we need in QEMU,
given that we control linux-user/*/syscall_nr.h.

This is the last instance of TARGET_NR_oldumount, so delete that from
the strace.list.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-09-24 10:47:06 +03:00
Peter Maydell
4a24a75810 linux-user: Allow targets to specify a minimum uname release
For newer target architectures, glibc can be picky about the kernel
version: for example, it will not run on an aarch64 system unless
the kernel reports itself as at least 3.8.0. Accommodate this by
enhancing the existing support for faking the kernel version so
that each target can optionally specify a minimum version: if
the user doesn't force a specific fake version then we will override
with the minimum required version only if the real host kernel
version is insufficient.

Use this facility to let aarch64 report a minimum of 3.8.0.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-21-git-send-email-peter.maydell@linaro.org
2013-09-10 19:11:29 +01:00
Alexander Graf
09701199f6 linux-user: Fix up AArch64 syscall handlers
Some syscall handlers have special code for ARM enabled that we don't
need on AArch64. Exclude AArch64 in those cases. In other places we
can share struct definitions with other targets or have to provide our
own.

With this patch applied, most syscall definitions in linux-user should
be sound for AArch64.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-16-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-9-git-send-email-john.rigby@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10 19:11:28 +01:00
Andreas Färber
bdc44640cb cpu: Use QTAILQ for CPU list
Introduce CPU_FOREACH(), CPU_FOREACH_SAFE() and CPU_NEXT() shorthand
macros.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-03 12:25:55 +02:00
Peter Maydell
95c1eb19ea linux-user: Return success from m68k set_thread_area syscall
The m68k set_thread_area syscall implementation failed to set the
return value. Correctly set it zero, since this syscall will always
succeed.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375093909-13653-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 19:56:52 -05:00
Alexander Graf
b24c882b94 linux-user: Reset copied CPUs in cpu_copy() always
When a new thread gets created, we need to reset non arch specific state to
get the new CPU into clean state.

However this reset should happen before the arch specific CPU contents get
copied over. Otherwise we end up having clean reset state in our newly created
thread.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23 17:28:28 +03:00
Peter Maydell
82f05b69e6 linux-user: Fix pipe syscall return for SPARC
SPARC is one of the CPUs which has a funny syscall ABI for the
pipe syscall; add it to the set of special cases in do_pipe().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23 17:28:28 +03:00
Peter Maydell
24cb36a61c configure: Make NPTL non-optional
Now all linux-user targets support building with NPTL, we can make it
mandatory. This is a good idea because:
 * NPTL is no longer new and experimental; it is completely standard
 * in practice, linux-user without NPTL is nearly useless for
   binaries built against non-ancient glibc
 * it allows us to delete the rather untested code for handling
   the non-NPTL configuration

Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the
bsd-user codebase alone. This makes no change for bsd-user, since
our configure test for NPTL had a "#include <linux/futex.h>"
which means bsd-user would never have been compiled with
CONFIG_USE_NPTL defined, and it still is not.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22 21:54:52 +03:00
Peter Maydell
2667e71c3d linux-user: Enable NPTL for x86-64
Add x86-64 implementation of cpu_set_tls() (like the kernel, we
just have to call do_arch_prctl() to set FS); this allows us to
enable NPTL.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22 21:54:46 +03:00
Alexander Graf
bc22eb447c linux-user: Add i386 TLS setter
We can easily set the TLS on i386. Add code to do so.

Signed-off-by: Alexander Graf <agraf@suse.de>
[PMM: also remove "target_nptl=no" line from configure, for
 consistency with other patches in this series]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22 21:54:42 +03:00
Peter Maydell
4ce6243dc6 linux-user: Clean up handling of clone() argument order
Linux manages to have three separate orderings of the arguments to
the clone() syscall on different architectures. In the kernel these
are selected via CONFIG_CLONE_BACKWARDS and CONFIG_CLONE_BACKWARDS2.
Clean up our implementation of this to use similar #define names
rather than a TARGET_* ifdef ladder.

This includes behaviour changes fixing bugs on cris, x86-64, m68k,
openrisc and unicore32.  cris had explicit but wrong handling; the
others were just incorrectly using QEMU's default, which happened
to be the equivalent of CONFIG_CLONE_BACKWARDS. (unicore32 appears
to be broken in the mainline kernel in that it tries to use arg3 for
both parent_tidptr and newtls simultaneously -- we don't attempt
to emulate this bug...)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22 21:54:36 +03:00
Peter Maydell
d312bbe105 linux-user: Add missing 'break' in i386 get_thread_area syscall
The i386 code for the get_thread_area syscall was missing a
'break' which meant it would have fallen through into the
implementation of the following syscall; add it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22 21:54:28 +03:00
Peter Maydell
1ccd9374af linux-user: Enable NPTL for m68k
For m68k, per-thread data is a purely kernel construct with no
CPU level support. Implement it via a field in the TaskState structure,
used by cpu_set_tls() and the set_thread_area/get_thread_area
syscalls. This allows us to enable compilation with NPTL.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by:  Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22 21:54:20 +03:00
Anthony Liguori
51455c59dd QOM CPUState refactorings
* Fix for OpenRISCCPU subclasses
 * Fix for gdbstub CPU selection
 * Move linux-user CPU functions into new header
 * CPUState part 10 refactoring: first_cpu, next_cpu, cpu_single_env et al.
 * Fix some targets to consistently inline TCG code generation
 * Centrally log CPU reset
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJR3VkXAAoJEPou0S0+fgE/KFQP/3eUyCzZ6QmUG3gmrnfYRDMH
 uwMstD1JRUc5kTEC2bMtld8zZKwx2kxMJpe5fizig8GaLka0J5U2wyvwskkX27ag
 7ouNwFdD/dOmvaKfcqHYKbA3CTuIrbnMm7nzrXpLnWXCiMlW1XmXttQsb3hoAjjt
 asFxQIHONNIgqpcJBrz/C6XX2bEkLra4s2QlXPE5Bl3QkKTtK9+NYahHtgIk3Y7Y
 fqbAxebNGh9eZ9PKjPExhNBZ17Yi4ciM7UB7yrXFYOfwKSpmmTsJdu/m776b1oAK
 c/zWO0uea+sLsMnibnSD1foeeZJItDQDRid+PjC44zB5kS8pkPcT5+TVB04Zilap
 rhNF2Fox+fe8eIc/2WuY3ZGchVjrD/EPbFFCCRQ/qI3Nb98WfLCDu3pAP1hRdo+p
 P6qCH5JmWYcR+2gp8MHY0NtqcklL8A2HpQTRvX1mUliMJbE+unanT4nmKolOTYrm
 +6jvp72GkmqqaLQDQ0d8ig/GmcI9QeftSFD5Y8p5prPsMkQbOAbOUSBlPgwY+Syl
 QmP8xNNzbj00UF8GvRL/m9O75geis/I+op5E7hJqaO5U1yd+ww5Z1EFvDEkUOeYu
 BclqCg1jTnzBzE/FaRP0NWFAUDR+4Z0tumdRES1cDfaMJr3+pYT7y8tjVZn7PEvn
 Ljq+/pyyiunG3Mbvw2o8
 =lFBU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging

QOM CPUState refactorings

* Fix for OpenRISCCPU subclasses
* Fix for gdbstub CPU selection
* Move linux-user CPU functions into new header
* CPUState part 10 refactoring: first_cpu, next_cpu, cpu_single_env et al.
* Fix some targets to consistently inline TCG code generation
* Centrally log CPU reset

# gpg: Signature made Wed 10 Jul 2013 07:52:39 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (41) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony: (43 commits)
  cpu: Move reset logging to CPUState
  target-ppc: Change LOG_MMU_STATE() argument to CPUState
  target-i386: Change LOG_PCALL_STATE() argument to CPUState
  log: Change log_cpu_state[_mask]() argument to CPUState
  target-i386: Change do_smm_enter() argument to X86CPU
  target-i386: Change do_interrupt_all() argument to X86CPU
  target-xtensa: Change gen_intermediate_code_internal() arg to XtensaCPU
  target-unicore32: Change gen_intermediate_code_internal() signature
  target-sparc: Change gen_intermediate_code_internal() argument to SPARCCPU
  target-sh4: Change gen_intermediate_code_internal() argument to SuperHCPU
  target-s390x: Change gen_intermediate_code_internal() argument to S390CPU
  target-ppc: Change gen_intermediate_code_internal() argument to PowerPCCPU
  target-mips: Change gen_intermediate_code_internal() argument to MIPSCPU
  target-microblaze: Change gen_intermediate_code_internal() argument types
  target-m68k: Change gen_intermediate_code_internal() argument to M68kCPU
  target-lm32: Change gen_intermediate_code_internal() argument to LM32CPU
  target-i386: Change gen_intermediate_code_internal() argument to X86CPU
  target-cris: Change gen_intermediate_code_internal() argument to CRISCPU
  target-arm: Change gen_intermediate_code_internal() argument to ARMCPU
  target-alpha: Change gen_intermediate_code_internal() argument to AlphaCPU
  ...
2013-07-10 10:54:16 -05:00
Andreas Färber
a2247f8ec9 linux-user: Change thread_env to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:33:01 +02:00
Andreas Färber
182735efaf cpu: Make first_cpu and next_cpu CPUState
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.

gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:32:54 +02:00
Andreas Färber
9b056fcc5b linux-user: Clean up do_syscall() Coding Style for TARGET_NR_exit
In particular fix 6-/10-char indentation.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:20:28 +02:00
Petar Jovanovic
f651e6ae55 linux-user: improve target_to_host_sock_type conversion
Previous implementation has failed to take into account different value of
SOCK_NONBLOCK on target and host, and existence of SOCK_CLOEXEC.
The same conversion has to be applied both for do_socket and do_socketpair,
so the code has been isolated in a static inline function.

enum sock_type in linux-user/socket.h has been extended to include
TARGET_SOCK_CLOEXEC and TARGET_SOCK_NONBLOCK, similar to definition in libc.
The patch also includes necessary code style changes (tab to spaces) in the
header file since most of the file has been touched by this change.

Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Message-id: 1372639454-7560-1-git-send-email-petar.jovanovic@rt-rk.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-05 15:45:40 +03:00
Peter Maydell
1acae9f223 linux-user: Fix sys_utimensat (would not compile on old glibc)
Commit c0d472b12e accidentally dropped the definition of
__NR_SYS_utimensat even though its use is guarded by
CONFIG_UTIMENSAT, not CONFIG_ATFILE. Some older glibc don't
have utimensat() (even if they have the other *at() functions).
Fix this by correctly cleaning up the sys_utimensat()
implementation and #defines, so that we always provide the
syscall if needed whether we're doing it via glibc or not.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1371743841-26110-1-git-send-email-peter.maydell@linaro.org
2013-07-05 15:45:40 +03:00
Laurent Vivier
7ff7b66618 linux-user: add SIOCADDRT/SIOCDELRT support
This allows to pass the device name.

You can test this with the "route" command.

WITHOUT this patch:

$ sudo route add -net default gw 10.0.3.1 eth0
SIOCADDRT: Bad address
$ netstat -nr
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Ifa
10.0.3.0        0.0.0.0         255.255.255.0   U         0 0          0 eth

WITH this patch:

$ sudo route add -net default gw 10.0.3.1 eth0
$ netstat -nr
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Ifa
0.0.0.0         10.0.3.1        0.0.0.0         UG        0 0          0 eth
10.0.3.0        0.0.0.0         255.255.255.0   U         0 0          0 eth

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-05 15:45:40 +03:00
Andreas Schwab
463d8e7393 linux-user: handle /proc/$$ like /proc/self
Some applications use /proc/$$/... (where $$ is the own pid) instead of
/proc/self/... to refer to their own proc files.  Extend the interception
for open and readlink to handle this case.  Also, do the same interception
in readlinkat.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-05 15:45:40 +03:00
Peter Maydell
c0d472b12e linux-user: Drop direct use of openat etc syscalls
The linux-user syscall emulation layer currently supports the
openat family of syscalls via two mechanisms: simply calling
the corresponding libc functions, and making direct syscalls.
Since glibc has supported these functions since at least glibc
2.5, there's no real need to retain the (essentially untested)
direct syscall fallback code, so simply delete it. This allows
us to remove some ifdeffery that was attempting to disable
provision of some of the syscalls if the host didn't seem to
support them, which in some cases was actually wrong (eg where
there are several flavours of the syscall and we only need
one of them, not necessarily the exact one the guest has,
as with the fstatat* calls).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
Message-id: 1370126121-22975-2-git-send-email-peter.maydell@linaro.org
2013-06-12 16:20:21 +01:00
Peter Maydell
3307e2363a linux-user: Allow getdents to be provided by getdents64
Newer architectures may only implement the getdents64 syscall, not
getdents. Provide an implementation of getdents in terms of getdents64
so that we can run getdents-using targets on a getdents64-only host.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
Message-id: 1370344377-27445-1-git-send-email-peter.maydell@linaro.org
Message-id: 1370193044-24535-1-git-send-email-peter.maydell@linaro.org
2013-06-12 16:20:21 +01:00
Lei Li
d2d6b8576c linux-user: Fix typo in comment
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-01 14:25:38 +04:00
Christophe Lyon
e24fed4ed4 fix /proc/self/maps output
Add a space at end of line when there is no filename to print, to
conform to linux kernel format (see show_map_vma() in
fs/proc/task_mmu.c).

Signed-off-by: Christophe Lyon <christophe.lyon@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-18 16:35:11 +04:00
Peter Maydell
7edd2cf1a2 linux-user: fix compile error due to stray colon at end of #ifdef line
Remove a stray colon from the end of a #ifdef line. Some versions
of gcc complain about this:
 linux-user/syscall.c: In function ‘do_syscall’:
 linux-user/syscall.c:7606:28: error: extra tokens at end of #ifdef directive [-Werror]

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26 11:52:29 +02:00
Andreas Schwab
03903ffcfb linux-user: fix setgroups/getgroups for non-UID16 archs
Don't assume target_id is a short.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-04-19 10:48:51 +03:00
Andreas Schwab
9ab709be59 linux-user: fix undefined shift in copy_to_user_fdset
If TARGET_ABI_BITS is bigger than 32 we shift by more than the size of int.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-04-19 10:48:51 +03:00
Petar Jovanovic
c7128c9fd5 linux-user: change do_semop to return target errno when unsuccessful
do_semop() is called from two places, and one of these fails to convert
return error to target errno when semop fails. This patch changes the
function to always return target errno in case of an unsuccessful call.

Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-04-19 10:48:51 +03:00
Petar Jovanovic
5947c697ce linux-user: pass correct host flags to eventfd2 call
This change makes conversion of TARGET_O_NONBLOCK and TARGET_O_CLOEXEC flags
to host flags before calling eventfd for TARGET_NR_eventfd2.

Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-12 14:33:20 +02:00
Peter Maydell
e9a970a831 linux-user/syscall.c: Don't warn about unimplemented get_robust_list
The nature of the kernel ABI for the get_robust_list and set_robust_list
syscalls means we cannot implement them in QEMU. Make get_robust_list
silently return ENOSYS rather than using the default "print message and
then fail ENOSYS" code path, in the same way we already do for
set_robust_list, and add a comment documenting why we do this.

This silences warnings which were being produced for emulating
even trivial programs like 'ls' in x86-64-on-x86-64.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11 14:35:08 +02:00
Peter Maydell
a94b4987e2 linux-user: Implement accept4
Implement the accept4 syscall (which is identical to accept
but has an additional flags argument).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11 14:34:42 +02:00
Peter Maydell
a8fd1aba85 linux-user: Implement sendfile and sendfile64
Implement the sendfile and sendfile64 syscalls. This implementation
passes all the LTP test cases for these syscalls.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11 14:34:28 +02:00
Peter Maydell
dfae8e00f8 linux-user: make bogus negative iovec lengths fail EINVAL
If the guest passes us a bogus negative length for an iovec, fail
EINVAL rather than proceeding blindly forward. This fixes some of
the error cases tests for readv and writev in the LTP.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11 14:34:05 +02:00
Dillon Amburgey
f2b79ce9dc linux-user: Support setgroups syscall with no groups
Signed-off-by: Dillon Amburgey <dillona@dillona.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11 13:05:08 +02:00
John Rigby
cce246e0a2 linux-user/syscall.c: handle FUTEX_WAIT_BITSET in do_futex
Upstream libc has recently changed to start using
FUTEX_WAIT_BITSET instead of FUTEX_WAIT and this
is causing do_futex to return -TARGET_ENOSYS.

Pass bitset in val3 to sys_futex which will be
ignored by kernel for the FUTEX_WAIT case.

Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-03-11 13:04:56 +02:00
Andreas Färber
0d34282fdd cpu: Move host_tid field to CPUState
Change gdbstub's cpu_index() argument to CPUState now that CPUArchState
is no longer used.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16 14:50:59 +01:00
Anthony Liguori
bd4bd24ed3 Merge branch 'for-linux-user' of https://git.gitorious.org/qemu-m68k/qemu-m68k into staging
* 'for-linux-user' of https://git.gitorious.org/qemu-m68k/qemu-m68k:
  linux-user: correct reboot()
  linux-user: correct setsockopt()
  linux-user: correct print_timeval() swap tv_sec and tv_usec
  linux-user: correct msgrcv()

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06 16:39:04 -06:00
Paolo Bonzini
5c099537a6 cpu: do not use object_delete
CPUs are never added to the composition tree, so delete is achieved
simply by removing the last references to them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01 15:53:11 -06:00
Laurent Vivier
c07ecc6866 linux-user: correct reboot()
According to man reboot(2), the 4th argument is only used with
LINUX_REBOOT_CMD_RESTART2. In other cases, trying to convert
the value can generate EFAULT.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-01-30 12:13:21 +01:00
Laurent Vivier
1b09aeb908 linux-user: correct setsockopt()
SO_SNDTIMEO and SO_RCVTIMEO take a struct timeval, not an int

To test this, you can use :

QEMU_STRACE= ping localhost 2>&1 |grep TIMEO
568 setsockopt(3,SOL_SOCKET,SO_SNDTIMEO,{1,0},8) = 0
568 setsockopt(3,SOL_SOCKET,SO_RCVTIMEO,{1,0},8) = 0

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-01-30 12:13:21 +01:00
Laurent Vivier
79dd77de12 linux-user: correct msgrcv()
All parameters must be swapped before the call of do_msgrcv().

Allow faked (debian fakeroot daemon) to work properly.

WITHOUT this patch:

$ faked-sysv --foreground --debug
using 1723744788 as msg key
msg_key=1723744788
1723744788:431
FAKEROOT: msg=131072, key=1723744788
FAKEROOT: r=-1, received message type=-150996052, message=-160219330
FAKEROOT, get_msg: Bad address
r=14, EINTR=4
fakeroot: clearing up message queues and semaphores, signal=-1
fakeroot: database save FAILED

WITH this patch:

$ faked-sysv --foreground --debug
using 1569385744 as msg key
msg_key=1569385744
1569385744:424
FAKEROOT: msg=0, key=1569385744
^C
fakeroot: clearing up message queues and semaphores, signal=2
fakeroot: database save FAILED

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-01-30 12:13:21 +01:00
Laurent Vivier
9468a5d490 alpha-linux-user: Correct select
Alpha, like s390x, passes all select arguments in registers.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-01-16 08:15:16 -08:00
Laurent Vivier
2ba7f73006 alpha-linux-user: Translate fcntl l_type
The values of F_RDLCK, F_WRLCK, F_UNLCK, F_EXLCK, F_SHLCK
differ between alpha and other linux architectures.

This patch allows to run "dpkg" (database lock).

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-01-16 08:13:17 -08:00
John Spencer
586b0bef84 linux-user/syscall.c: remove forward declarations
instead use the correct headers that define these functions.

Requested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: John Spencer <maillist-qemu@barfooze.de>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-04 14:38:05 +01:00
Anthony Liguori
27dd773058 Merge remote-tracking branch 'bonzini/header-dirs' into staging
* bonzini/header-dirs: (45 commits)
  janitor: move remaining public headers to include/
  hw: move executable format header files to hw/
  fpu: move public header file to include/fpu
  softmmu: move remaining include files to include/ subdirectories
  softmmu: move include files to include/sysemu/
  misc: move include files to include/qemu/
  qom: move include files to include/qom/
  migration: move include files to include/migration/
  monitor: move include files to include/monitor/
  exec: move include files to include/exec/
  block: move include files to include/block/
  qapi: move include files to include/qobject/
  janitor: add guards to headers
  qapi: make struct Visitor opaque
  qapi: remove qapi/qapi-types-core.h
  qapi: move inclusions of qemu-common.h from headers to .c files
  ui: move files to ui/ and include/ui/
  qemu-ga: move qemu-ga files to qga/
  net: reorganize headers
  net: move net.c to net/
  ...

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19 17:15:39 -06:00
Paolo Bonzini
1de7afc984 misc: move include files to include/qemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:39 +01:00
John Spencer
c56dc77424 linux-user/syscall.c: remove wrong forward decl of setgroups()
this declaration is wrong:
the correct prototype on linux is:
int setgroups(size_t size, const gid_t *list);

since by default musl libc exposes this symbol in unistd.h
additionally to grp.h, the wrong declaration causes a build error.

the proper fix is to simply include the correct header.

Signed-off-by: John Spencer <maillist-qemu@barfooze.de>

Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-18 17:22:31 +01:00
Peter Maydell
24c35a504e linux-user: Merge pread/pwrite into pread64/pwrite64
The Linux syscalls underlying pread() and pwrite() take a 64 bit
offset on all architectures, even if some of them name the syscall
"pread/pwrite" rather than "pread64/pwrite64" for historical reasons.
So move the four QEMU target architectures (arm, i386, sparc,
unicore32) which were defining TARGET_NR_pread/pwrite to define
TARGET_NR_pread64/pwrite64 instead, and drop the TARGET_NR_pread/pwrite
implementation code completely.

(Based on examination of the kernel sources for the four architectures
this patch affects.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08 18:49:30 +00:00
Aurelien Jarno
41a05a4576 Merge branch 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu
* 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu:
  linux-user: register align p{read, write}64
  linux-user: ppc: mark as long long aligned
  tcg: Remove TCG_TARGET_HAS_GUEST_BASE define
  configure: Remove unnecessary host_guest_base code
  linux-user: If loading fails, print error as string, not number
  linux-user: Fix siginfo handling
  alpha-linux-user: Fix sigaltstack structure definition
  linux-user: Implement gethostname
  linux-user: Perform more checks on iovec lists
  linux-user: fix multi-threaded /proc/self/maps
  linux-user: fix statfs
2012-10-19 20:28:22 +02:00
Edgar E. Iglesias
a5b3bdcba8 microblaze: Support setting of TLS ptr
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-10-19 13:24:12 +02:00
Alexander Graf
ae017a5b95 linux-user: register align p{read, write}64
pread64 and pwrite64 pass 64bit parameters which for some architectures need
to be aligned to special argument pairs, creating a gap argument.

Handle this special case the same way we handle it in other places of the code.

Reported-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Alex Barcelo <abarcelo@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-12 14:42:52 +03:00
Alexander Graf
4a1def4e4e linux-user: ppc: mark as long long aligned
The SysV PPC32 ABI dictates that long long (64bit) parameters are pass in odd/even
register pairs. Because unlike ARM and MIPS we start at an odd register number,
we can reuse the same aligning code that ARM and MIPS use.

Clarified inline comment that it is SysV ABI that requires long long aligned
parameters - Riku

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-12 14:38:36 +03:00
Richard Henderson
a05c640915 linux-user: Fix siginfo handling
Compare signal numbers in the proper domain.
Convert all of the fields for SIGIO and SIGCHLD.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-12 14:01:49 +03:00
Richard Henderson
3d21d29c32 linux-user: Implement gethostname
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-12 13:59:25 +03:00
Richard Henderson
f287b2c2d4 linux-user: Perform more checks on iovec lists
Validate count between 0 and IOV_MAX.  Limit total length of
operation in the same way the kernel does.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-12 13:59:09 +03:00
Alexander Graf
1bdd7c7ea8 linux-user: fix multi-threaded /proc/self/maps
When reading our faked /proc/self/maps from a secondary thread,
we get an invalid stack entry. This is because ts->stack_base is not
initialized in non-primary threads.

However, ts->info is, and the stack layout information we're looking
for is there too. So let's use that one instead!

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-12 13:58:13 +03:00
Alexander Graf
229d3376a3 linux-user: fix statfs
The statfs syscall should always memset(0) its full struct extent before
writing to it. Newer versions of the syscall use one of the reserved fields
for flags, which would otherwise get stale values from uncleaned memory.

This fixes libarchive for me, which got confused about the return value of
pathconf("/", _PC_REC_XFER_ALIGN) otherwise, as it some times gave old pointers
as return value.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-12 13:58:13 +03:00
Stefan Weil
ad11ad7774 linux-user: Remove redundant null check and replace free by g_free
Report from smatch:

linux-user/syscall.c:3632 do_ioctl_dm(220) info:
 redundant null check on big_buf calling free()

'big_buf' was allocated by g_malloc0, therefore free was also
replaced by g_free.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-09-23 07:35:29 +01:00
Dmitry V. Levin
333858b77c linux-user: fix emulation of getdents
In case when TARGET_ABI_BITS == 32 && HOST_LONG_BITS == 64, the last
byte of the target dirent structure (aka d_type byte) was never copied
from the host dirent structure, thus breaking everything that relies
on valid d_type value, e.g. glob(3).

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-08-27 10:17:30 +03:00
Jim Meyering
0d07fe47d4 linux-user: do_msgrcv: don't leak host_mb upon TARGET_EFAULT failure
Also, use g_malloc to avoid NULL-deref upon OOM.

Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-22 10:47:14 -05:00
Jing Huang
aebf5bc727 linux-user: make host_to_target_cmsg support SO_TIMESTAMP cmsg_type
Signed-off-by: Jing Huang <jing.huang.pku@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-08-14 20:26:55 +01:00
Jing Huang
920394db81 linux-user: make do_setsockopt support SOL_RAW ICMP_FILTER socket option
Signed-off-by: Jing Huang <jing.huang.pku@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-08-14 20:26:55 +01:00
Jing Huang
ca6190673c linux-user: pass sockaddr from host to target
Signed-off-by: Jing Huang <jing.huang.pku@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-08-14 20:26:55 +01:00
Peter Maydell
dd6e957a14 linux-user: Move target_to_host_errno_table[] setup out of ioctl loop
The code to initialise the target_to_host_errno_table[] array was
accidentally inside the loop through checking and initialising all
the supported ioctls. This was harmless but meant that we reinitialised the
array several hundred times on startup.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-08-13 12:45:46 +01:00
Richard Henderson
95c098286b alpha-linux-user: Fix the getpriority syscall
Alpha uses unbiased priority values in the syscall, with the a3
return value signaling error conditions.  Therefore, properly
interpret the libc getpriority as needed for the guest rather
than passing the host value through unchanged.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-08-04 09:37:50 -07:00
Richard Henderson
0229f5a30e alpha-linux-user: Properly handle the non-rt sigprocmask syscall.
Name the syscall properly for QEMU, kernel source notwithstanding.
Fix syntax errors in the code thus enabled within do_syscall.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-08-04 09:37:49 -07:00
Richard Henderson
e7ea6cbefd linux-user: Translate pipe2 flags; add to strace
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-08-04 09:37:49 -07:00
Richard Henderson
afc8763f9d linux-user: Handle O_SYNC, O_NOATIME, O_CLOEXEC, O_PATH
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-08-04 09:37:49 -07:00
Richard Henderson
6e06d515d4 alpha-linux-user: Handle TARGET_SSI_IEEE_RAISE_EXCEPTION properly
We weren't aggregating the exceptions, nor raising signals properly.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-08-04 09:37:49 -07:00
Jia Liu
d962783e98 target-or32: Add linux user support
Add QEMU OpenRISC linux user support.

Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-27 21:13:05 +00:00
Andreas Färber
ff18b7625f linux-user: Use cpu_reset() after cpu_init() / cpu_copy()
Eliminates cpu_state_reset() usage.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-04 23:00:45 +02:00
Alexander Graf
1a49ef2ad3 linux-user: fix emulation of /proc/self/maps
Improve the emulation of /proc/self/maps by reading the underlying
host maps file and passing lines through with addresses adjusted
to be guest addresses. This is necessary to avoid false triggers
of the glibc check that a format string containing '%n' is not in
writable memory. (For an example see the bug reported in
https://bugs.launchpad.net/qemu-linaro/+bug/947888 where gpg aborts.)

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-05-03 17:31:52 +03:00
Andreas Färber
209c484918 linux-user: Clean up interim solution for exit syscall
After all target CPUs have been QOM'ified, we no longer need an #ifdef
to switch between object_delete() and g_free() in NPTL thread exit.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-05-03 17:31:44 +03:00
Andreas Färber
11ea409052 linux-user: Fix exit syscall with QOM CPU
For QOM'ified CPUs we cannot g_free() CPUArchState, we must
object_delete() the object it is embedded into.

Fixes LP#982321 (invalid free() while executing pacman with qemu-arm).

Reported-by: Serge Schneider <serge@xecdesign.com>
Reported-by: Russell Keith Davis <russell@russelldavis.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Serge Schneider <serge@xecdesign.com>
Tested-by: Russell Keith Davis <russell@russelldavis.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-15 16:54:46 +00:00
Peter Maydell
db9526b10a linux-user: Add support for prctl PR_GET_NAME and PR_SET_NAME
Add support for the prctl options PR_GET_NAME and PR_SET_NAME,
which take or return a name in a 16 byte buffer pointed to by arg2.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-04-06 18:49:58 +03:00