According to the sm501 specs the hardware cursor colors are to be given in
the rgb565 format, but the code currently interprets them as bgr565.
Therefore, the colors of the hardware cursors are wrong in the QEMU
display, e.g., the standard mouse pointer of AmigaOS appears blue instead
of red. This change fixes this issue by replacing the existing naive
bgr565 => rgb888 conversion with a standard rgb565 => rgb888 one that also
scales the color component values properly.
Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When writing registers that have read only bits we have to avoid
changing these bits as they may have non zero values. Make sure we use
the correct masks to mask out read only and reserved bits when
changing registers.
Also remove extra spaces from dram_control and arbitration_control
assignments.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Simplify the users of memory_region_snapshot_and_clear_dirty, so
that they do not have to call memory_region_sync_dirty_bitmap
explicitly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Noticed by Coverity, forgotten in 5690d9ece
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are not really implemented (just return zero or default values)
but add these so guests accessing them can run.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These were forgotten when adding panel layer support in ffd3925701
"SM501 emulation for R2D-SH4".
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[dwg: Added reference to earlier commit in message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "cannot_instantiate_with_device_add_yet" flag has been renamed
to "user_creatable" a while ago.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:
1) The ones that already have INTERFACE_PCIE_DEVICE set:
* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3
2) base-pci-bridge
Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:
* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge
The direct subtypes of base-pci-bridge not touched by this patch
are:
* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
marked as PCIe-only devices.
3) megasas-base
Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.
"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".
Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The sm501 device uses vmstate_register_ram_global() to register its
memory region for migration. This means it gets a name that is
assumed to be global to the whole system, which in turn means that if
you create two of the device we assert because of the duplication:
qemu-system-ppc -device sm501 -device sm501
RAMBlock "sm501.local" already registered, abort!
Aborted (core dumped)
Changing this to just use memory_region_init_ram()'s automatic
registration of the memory region with a device-local name fixes
this. The downside is that it breaks migration compatibility, but
luckily we only added migration support to this device in the 2.10
release cycle so we haven't released a QEMU version with the broken
implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1500309462-12792-1-git-send-email-peter.maydell@linaro.org
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate().
This leaves the way clear for us to provide a memory_region_init_ram()
which does handle migration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
This is to allow clients to initialise these without failing as long
as no 2D engine function is called that would use the written value.
Saved values are not used yet (may get used when more of 2D engine is
added sometimes) and clients normally only write to most of these
registers, nothing is known to ever read them but they are documented
as read/write so also implement read for these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 80adf8e4d084ec6cc30d149f8e8215debb67314a.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Rename a variable
- Move variable declarations out of loop to the beginning in draw_hwc_line
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 187c9e4e09d9bc2967b2454b36bb088ceef0b8bc.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rework HWC handling to simplify it and fix cursor not updating on
screen as needed. Previously cursor was not updated because checking
for changes in a line overrode the update flag set for the cursor but
fixing this is not enough because the cursor should also be updated if
its shape or location changes. Introduce hwc_invalidate() function to
handle that similar to other display controller models.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 6970a5e9868b7246656c1d02038dc5d5fa369507.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We only emulate the sysbus device in its default LE mode and PCI is LE
as well so specify this for registers and framebuffer memory.
Note that though the Linux kernel driver has code which claims to
handle both big and little endian, it is obviously bogus for 16 bit
and cannot be trusted as a source of information on the framebuffer
pixel format. This is our best guess about device behaviour based on
the specs and testing with MorphOS that is known to work on real HW.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 8b9605a569f8bf54074e15903620b18cd9967c89.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only the display controller part is created automatically on PCI
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 647d292c6f5abba8b2a614687229949b5dcb864e.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not use the base address to access data in local memory. This is in
preparation to allow chip connected via PCI where base address depends
on where the BAR is mapped so it will be unknown.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 79dab21bc6ec4d563aabf265c3bab40e2e95aae8.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adding vmstate saving is not in this patch because the state structure
will be changed in further patches, then another patch will add
vmstate descriptor after those changes.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: a32b7fc981a20205f96d530d8e958f12ace1104c.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-21-git-send-email-peter.maydell@linaro.org
Symptom:
$ qemu-system-x86_64 -m 10000000
Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456:
upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory
Aborted (core dumped)
Root cause: commit ef701d7 screwed up handling of out-of-memory
conditions. Before the commit, we report the error and exit(1), in
one place, ram_block_add(). The commit lifts the error handling up
the call chain some, to three places. Fine. Except it uses
&error_abort in these places, changing the behavior from exit(1) to
abort(), and thus undoing the work of commit 3922825 "exec: Don't
abort when we can't allocate guest memory".
The three places are:
* memory_region_init_ram()
Commit 4994653 (right after commit ef701d7) lifted the error
handling further, through memory_region_init_ram(), multiplying the
incorrect use of &error_abort. Later on, imitation of existing
(bad) code may have created more.
* memory_region_init_ram_ptr()
The &error_abort is still there.
* memory_region_init_rom_device()
Doesn't need fixing, because commit 33e0eb5 (soon after commit
ef701d7) lifted the error handling further, and in the process
changed it from &error_abort to passing it up the call chain.
Correct, because the callers are realize() methods.
Fix the error handling after memory_region_init_ram() with a
Coccinelle semantic patch:
@r@
expression mr, owner, name, size, err;
position p;
@@
memory_region_init_ram(mr, owner, name, size,
(
- &error_abort
+ &error_fatal
|
err@p
)
);
@script:python@
p << r.p;
@@
print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column)
When the last argument is &error_abort, it gets replaced by
&error_fatal. This is the fix.
If the last argument is anything else, its position is reported. This
lets us check the fix is complete. Four positions get reported:
* ram_backend_memory_alloc()
Error is passed up the call chain, ultimately through
user_creatable_complete(). As far as I can tell, it's callers all
handle the error sanely.
* fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize()
DeviceClass.realize() methods, errors handled sanely further up the
call chain.
We're good. Test case again behaves:
$ qemu-system-x86_64 -m 10000000
qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
[Exit 1 ]
The next commits will repair the rest of commit ef701d7's damage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
These are strictly speaking only needed for KVM and Xen, but it's still
nice to be consistent.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be required soon by the memory core.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop all the infrastructure for taddr properties (ie ones which
are 'hwaddr' sized). These are now unused, and any further desired
use would be rather questionable since device properties shouldn't
generally depend on a type that is conceptually variable based on
the target CPU. 32 or 64 bit integer properties should be used instead
as appropriate for the specific device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The sysbus-ohci dma-address property is declared as a HEX64
property, not a TADDR, so use the correct setter for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Pass a single GraphicHwOps struct pointer to graphic_console_init,
instead of a bunch of function pointers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Screendumps are alot simpler as we can update non-active
QemuConsoles now. So we only need to update the QemuConsole
we want write out, then dump the DisplaySurface content into
a ppm file. Done.
No console switching needed. No special support code in the
gfx card emulation needed. Zap it all. Also move ppm_save
out of the vga code and next to the qmp_screendump function.
For now screen dumping is limited to console #0 (like it used
to be), even though it is dead simple to extend it to other
consoles. I wanna finish the console cleanup before setting
new qapi interfaces into stone.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
The recent rearrangement of include files had some minor errors:
devices.h is not ARM specific and should not be in arm/
arm.h should be in arm/
Move these two headers to correct this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
