Fix the offset of the NSSRS field the CAP register.
From NVME 1.4, section 3 ("Controller Registers"), subsection 3.1.1
("Offset 0h: CAP – Controller Capabilities") CAP_NSSRS_SHIFT is bit 36,
not 33.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reported-by: Javier Gonzalez <javier.gonz@samsung.com>
Message-id: 20191023073315.446534-1-its@irrelevant.dk
Reviewed-by: John Snow <jsnow@redhat.com>
[mreitz: Added John's note on the location in the specification where
this information can be found]
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have two drivers (iscsi and file-posix) that (in some cases) return
success from their .bdrv_co_truncate() implementation if the block
device is larger than the requested offset, but cannot be shrunk. Some
callers do not want that behavior, so this patch adds a new parameter
that they can use to turn off that behavior.
This patch just adds the parameter and lets the block/io.c and
block/block-backend.c functions pass it around. All other callers
always pass false and none of the implementations evaluate it, so that
this patch does not change existing behavior. Future patches take care
of that.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
No reason to limit buffered copy to one cluster. Let's allow up to 1
MiB.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191022111805.3432-7-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently total allocation for parallel requests to block-copy instance
is unlimited. Let's limit it to 128 MiB.
For now block-copy is used only in backup, so actually we limit total
allocation for backup job.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191022111805.3432-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The only reason I can imagine for this strange code at the very-end of
bdrv_reopen_commit is the fact that bs->read_only updated after
calling drv->bdrv_reopen_commit in bdrv_reopen_commit. And in the same
time, prior to previous commit, qcow2_reopen_bitmaps_rw did a wrong
check for being writable, when actually it only need writable file
child not self.
So, as it's fixed, let's move things to correct place.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190927122355.7344-10-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Firstly, no reason to optimize failure path. Then, function name is
ambiguous: it checks for readonly and similar things, but someone may
think that it will ignore normal bitmaps which was just unchanged, and
this is in bad relation with the fact that we should drop IN_USE flag
for unchanged bitmaps in the image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190927122355.7344-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
We'll need reverse-foreach in the following commit, QTAILQ support it,
so move to QTAILQ.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190927122355.7344-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
bdrv_dirty_bitmap_next is always used in same pattern. So, split it
into _next and _first, instead of combining two functions into one and
add FOR_EACH_DIRTY_BITMAP macro.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add bs field to BdrvDirtyBitmap structure. Drop BlockDriverState
parameter from bitmap APIs where possible.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-3-vsementsov@virtuozzo.com
[Rebased on top of block-copy. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Drop meta bitmaps, as they are unused.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
qmp_block_dirty_bitmap_add and do_block_dirty_bitmap_remove do acquire
aio context since 0a6c86d024. But this is not enough: we also must
lock qcow2 mutex when access in-image metadata. Especially it concerns
freeing qcow2 clusters.
To achieve this, move qcow2_can_store_new_dirty_bitmap and
qcow2_remove_persistent_dirty_bitmap to coroutine context.
Since we work in coroutines in correct aio context, we don't need
context acquiring in blockdev.c anymore, drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's more comfortable to not deal with local_err.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-3-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Drop write notifiers and use filter node instead.
= Changes =
1. Add filter-node-name argument for backup qmp api. We have to do it
in this commit, as 257 needs to be fixed.
2. There are no more write notifiers here, so is_write_notifier
parameter is dropped from block-copy paths.
3. To sync with in-flight requests at job finish we now have drained
removing of the filter, we don't need rw-lock.
4. Block-copy is now using BdrvChildren instead of BlockBackends
5. As backup-top owns these children, we also move block-copy state
into backup-top's ownership.
= Iotest changes =
56: op-blocker doesn't shoot now, as we set it on source, but then
check on filter, when trying to start second backup.
To keep the test we instead can catch another collision: both jobs will
get 'drive0' job-id, as job-id parameter is unspecified. To prevent
interleaving with file-posix locks (as they are dependent on config)
let's use another target for second backup.
Also, it's obvious now that we'd like to drop this op-blocker at all
and add a test-case for two backups from one node (to different
destinations) actually works. But not in these series.
141: Output changed: prepatch, "Node is in use" comes from bdrv_has_blk
check inside qmp_blockdev_del. But we've dropped block-copy blk
objects, so no more blk objects on source bs (job blk is on backup-top
filter bs). New message is from op-blocker, which is the next check in
qmp_blockdev_add.
257: The test wants to emulate guest write during backup. They should
go to filter node, not to original source node, of course. Therefore we
need to specify filter node name and use it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-6-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split block_copy_set_callbacks out of block_copy_state_new. It's needed
for further commit: block-copy will use BdrvChildren of backup-top
filter, so it will be created from backup-top filter creation function.
But callbacks will still belong to backup job and will be set in
separate.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-4-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Move synchronization mechanism to block-copy, to be able to use one
block-copy instance from backup job and backup-top filter in parallel.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-2-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
A block driver can provide a callback to report driver-specific
statistics.
file-posix driver now reports discard statistics
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190923121737.83281-10-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Each block_acct_done/failed call is designed to correspond to a
previous block_acct_start call, which initializes the stats cookie.
However sometimes it is not the case, e.g. some error paths might
report the same cookie twice because it is hard to accurately track if
the cookie was reported yet or not.
This patch cleans the cookie after report.
(Note: block_acct_failed/done without a previous block_acct_start at
all should be avoided. Uninitialized cookie might hold a garbage value
and there is still "< BLOCK_MAX_IOTYPE" assertion for that)
It will be particularly useful in ide code where it's hard to
keep track whether the request done its accounting or not: in the
following patch of the series, trim requests will do the accounting
separately.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-4-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190923121737.83281-3-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split block_copy to separate file, to be cleanly shared with backup-top
filter driver in further commits.
It's a clean movement, the only change is drop "static" from interface
functions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-8-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Common interface for aio task loops. To be used for improving
performance of synchronous io loops in qcow2, block-stream,
copy-on-read, and may be other places.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190916175324.18478-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When iothreads are in use, the failure to grab the aio context results
in an assertion failure when trying to unlock things during blk_unref,
when trying to unlock a mutex that was not locked. In short, all
calls to nbd_export_put need to done while within the correct aio
context. But since nbd_export_put can recursively reach itself via
nbd_export_close, and recursively grabbing the context would deadlock,
we can't do the context grab directly in those functions, but must do
so in their callers.
Hoist the use of the correct aio_context from nbd_export_new() to its
caller qmp_nbd_server_add(). Then tweak qmp_nbd_server_remove(),
nbd_eject_notifier(), and nbd_esport_close_all() to grab the right
context, so that all callers during qemu now own the context before
nbd_export_put() can call blk_unref().
Remaining uses in qemu-nbd don't matter (since that use case does not
support iothreads).
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190917023917.32226-1-eblake@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Replace confusing usage:
~BDRV_SECTOR_MASK
With more clear:
(BDRV_SECTOR_SIZE - 1)
Remove BDRV_SECTOR_MASK and the unused BDRV_BLOCK_OFFSET_MASK which was
it's last user.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20190827185913.27427-3-nsoffer@redhat.com
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In job_finish_sync job_enter should be enough for a job to make some
progress and draining is a wrong tool for it. So use job_enter directly
here and drop job_drain with all related staff not used more.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit fe0480d6 and friends added BDRV_REQ_NO_FALLBACK as a way to
avoid wasting time on a preliminary write-zero request that will later
be rewritten by actual data, if it is known that the write-zero
request will use a slow fallback; but in doing so, could not optimize
for NBD. The NBD specification is now considering an extension that
will allow passing on those semantics; this patch updates the new
protocol bits and 'qemu-nbd --list' output to recognize the bit, as
well as the new errno value possible when using the new flag; while
upcoming patches will improve the client to use the feature when
present, and the server to advertise support for it.
The NBD spec recommends (but not requires) that ENOTSUP be avoided for
all but failures of a fast zero (the only time it is mandatory to
avoid an ENOTSUP failure is when fast zero is supported but not
requested during write zeroes; the questionable use is for ENOTSUP to
other actions like a normal write request). However, clients that get
an unexpected ENOTSUP will either already be treating it the same as
EINVAL, or may appreciate the extra bit of information. We were
equally loose for returning EOVERFLOW in more situations than
recommended by the spec, so if it turns out to be a problem in
practice, a later patch can tighten handling for both error codes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: tweak commit message, also handle EOPNOTSUPP]
When creating a read-only image, we are still advertising support for
TRIM and WRITE_ZEROES to the client, even though the client should not
be issuing those commands. But seeing this requires looking across
multiple functions:
All callers to nbd_export_new() passed a single flag based solely on
whether the export allows writes. Later, we then pass a constant set
of flags to nbd_negotiate_options() (namely, the set of flags which we
always support, at least for writable images), which is then further
dynamically modified with NBD_FLAG_SEND_DF based on client requests
for structured options. Finally, when processing NBD_OPT_EXPORT_NAME
or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the
runtime set of flags we've built up over several functions.
Let's refactor things to instead compute a baseline of flags as soon
as possible which gets shared between multiple clients, in
nbd_export_new(), and changing the signature for the callers to pass
in a simpler bool rather than having to figure out flags. We can then
get rid of the 'myflags' parameter to various functions, and instead
refer to client for everything we need (we still have to perform a
bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and
NBD_OPT_EXPORT_GO, but it's easier to see what is being computed).
This lets us quit advertising senseless flags for read-only images, as
well as making the next patch for exposing FAST_ZERO support easier to
write.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: improve commit message, update iotest 223]
The NBD specification defines NBD_FLAG_CAN_MULTI_CONN, which can be
advertised when the server promises cache consistency between
simultaneous clients (basically, rules that determine what FUA and
flush from one client are able to guarantee for reads from another
client). When we don't permit simultaneous clients (such as qemu-nbd
without -e), the bit makes no sense; and for writable images, we
probably have a lot more work before we can declare that actions from
one client are cache-consistent with actions from another. But for
read-only images, where flush isn't changing any data, we might as
well advertise multi-conn support. What's more, advertisement of the
bit makes it easier for clients to determine if 'qemu-nbd -e' was in
use, where a second connection will succeed rather than hang until the
first client goes away.
This patch affects qemu as server in advertising the bit. We may want
to consider patches to qemu as client to attempt parallel connections
for higher throughput by spreading the load over those connections
when a server advertises multi-conn, but for now sticking to one
connection per nbd:// BDS is okay.
See also: https://bugzilla.redhat.com/1708300
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190815185024.7010-1-eblake@redhat.com>
[eblake: tweak blockdev-nbd.c to not request shared when writable,
fix iotest 233]
Reviewed-by: John Snow <jsnow@redhat.com>
Introduce extended variants of bdrv_co_preadv and bdrv_co_pwritev
with qiov_offset parameter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-10-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-10-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add handlers supporting qiov_offset parameter:
bdrv_co_preadv_part
bdrv_co_pwritev_part
bdrv_co_pwritev_compressed_part
This is used to reduce need of defining local_qiovs and hd_qiovs in all
corners of block layer code. The following patches will increase usage
of this new API part by part.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190604161514.262241-5-vsementsov@virtuozzo.com
Message-Id: <20190604161514.262241-5-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
No .bdrv_has_zero_init() implementation returns 1 if growing the file
would add non-zero areas (at least with PREALLOC_MODE_OFF), so using it
in lieu of this new function was always safe.
But on the other hand, it is possible that growing an image that is not
zero-initialized would still add a zero-initialized area, like when
using nonpreallocating truncation on a preallocated image. For callers
that care only about truncation, not about creation with potential
preallocation, this new function is useful.
Alternatively, we could have added a PreallocMode parameter to
bdrv_has_zero_init(). But the only user would have been qemu-img
convert, which does not have a plain PreallocMode value right now -- it
would have to parse the creation option to obtain it. Therefore, the
simpler solution is to let bdrv_has_zero_init() inquire the
preallocation status and add the new bdrv_has_zero_init_truncate() that
presupposes PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-4-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_has_zero_init() only has meaning for newly created images or image
areas. If the mirror job itself did not create the image, it cannot
rely on bdrv_has_zero_init()'s result to carry any meaning.
This is the case for drive-mirror with mode=existing and always for
blockdev-mirror.
Note that we only have to zero-initialize the target with sync=full,
because other modes actually do not promise that the target will contain
the same data as the source after the job -- sync=top only promises to
copy anything allocated in the top layer, and sync=none will only copy
new I/O. (Which is how mirror has always handled it.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-3-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It is used to do transactional movement of the bitmap (which is
possible in conjunction with merge command). Transactional bitmap
movement is needed in scenarios with external snapshot, when we don't
want to leave copy of the bitmap in the base image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-3-jsnow@redhat.com
[Edited "since" version to 4.2 --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Add a public interface for get. While we're at it,
rename "bdrv_get_dirty_bitmap_locked" to "bdrv_dirty_bitmap_get_locked".
(There are more functions to rename to the bdrv_dirty_bitmap_VERB form,
but they will wait until the conclusion of this series.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I'm surprised it didn't come up sooner, but sometimes we have a +busy
bitmap as a source. This is dangerous from the QMP API, but if we are
the owner that marked the bitmap busy, it's safe to merge it using it as
a read only source.
It is not safe in the general case to allow users to read from in-use
bitmaps, so create an internal variant that foregoes the safety
checking.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We don't need or want a new sync mode for simple differences in
semantics. Create a new mode simply named "BITMAP" that is designed to
make use of the new Bitmap Sync Mode field.
Because the only bitmap sync mode is 'on-success', this adds no new
functionality to the backup job (yet). The old incremental backup mode
is maintained as a syntactic sugar for sync=bitmap, mode=on-success.
Add all of the plumbing necessary to support this new instruction.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Some of the generated qapi-types-MODULE.h are included all over the
place. Changing a QAPI type can trigger massive recompiling. Top
scorers recompile more than 1000 out of some 6600 objects (not
counting tests and objects that don't depend on qemu/osdep.h):
6300 qapi/qapi-builtin-types.h
5700 qapi/qapi-types-run-state.h
3900 qapi/qapi-types-common.h
3300 qapi/qapi-types-sockets.h
3000 qapi/qapi-types-misc.h
3000 qapi/qapi-types-crypto.h
3000 qapi/qapi-types-job.h
3000 qapi/qapi-types-block-core.h
2800 qapi/qapi-types-block.h
1300 qapi/qapi-types-net.h
Clean up headers to include generated QAPI headers only where needed.
Impact is negligible except for hw/qdev-properties.h.
This header includes qapi/qapi-types-block.h and
qapi/qapi-types-misc.h. They are used only in expansions of property
definition macros such as DEFINE_PROP_BLOCKDEV_ON_ERROR() and
DEFINE_PROP_OFF_AUTO(). Moving their inclusion from
hw/qdev-properties.h to the users of these macros avoids pointless
recompiles. This is how other property definition macros, such as
DEFINE_PROP_NETDEV(), already work.
Improves things for some of the top scorers:
3600 qapi/qapi-types-common.h
2800 qapi/qapi-types-sockets.h
900 qapi/qapi-types-misc.h
2200 qapi/qapi-types-crypto.h
2100 qapi/qapi-types-job.h
2100 qapi/qapi-types-block-core.h
270 qapi/qapi-types-block.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-3-armbru@redhat.com>
Back in 2016, we discussed[1] rules for headers, and these were
generally liked:
1. Have a carefully curated header that's included everywhere first. We
got that already thanks to Peter: osdep.h.
2. Headers should normally include everything they need beyond osdep.h.
If exceptions are needed for some reason, they must be documented in
the header. If all that's needed from a header is typedefs, put
those into qemu/typedefs.h instead of including the header.
3. Cyclic inclusion is forbidden.
This patch gets include/ closer to obeying 2.
It's actually extracted from my "[RFC] Baby steps towards saner
headers" series[2], which demonstrates a possible path towards
checking 2 automatically. It passes the RFC test there.
[1] Message-ID: <87h9g8j57d.fsf@blackfin.pond.sub.org>
https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg03345.html
[2] Message-Id: <20190711122827.18970-1-armbru@redhat.com>
https://lists.nongnu.org/archive/html/qemu-devel/2019-07/msg02715.html
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-2-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
No reason to use blocking channel for negotiation and we'll benefit in
further reconnect feature, as qio_channel reads and writes will do
qemu_coroutine_yield while waiting for io completion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Do effective copy-on-read request when we don't need data actually. It
will be used for block-stream and NBD_CMD_CACHE.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190725100550.33801-2-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[eblake: comment grammar fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
bdrv_set_aio_context_ignore() can only work in the main loop:
bdrv_drained_begin() only works in the main loop and the node's (old)
AioContext; and bdrv_drained_end() really only works in the main loop
and the node's (new) AioContext (contrary to its current comment, which
is just wrong).
Consequentially, bdrv_set_aio_context_ignore() must be called from the
main loop. Luckily, assuming that we can make block graph changes only
from the main loop as well, all its callers do that already.
Note that changing a node's context in a sense is an operation that
changes the block graph, so it actually makes sense to require this
function to be called from the main loop.
Also, fix bdrv_drained_end()'s description. You can only use it from
the main loop or the node's AioContext, and in the latter case, the
whole subtree must be in the same context.
Fixes: e037c09c78
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190722133054.21781-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We should never poll anywhere in bdrv_do_drained_end() (including its
recursive callees like bdrv_drain_invoke()), because it does not cope
well with graph changes. In fact, it has been written based on the
postulation that no graph changes will happen in it.
Instead, the callers that want to poll must poll, i.e. all currently
globally available wrappers: bdrv_drained_end(),
bdrv_subtree_drained_end(), bdrv_unapply_subtree_drain(), and
bdrv_drain_all_end(). Graph changes there do not matter.
They can poll simply by passing a pointer to a drained_end_counter and
wait until it reaches 0.
This patch also adds a non-polling global wrapper for
bdrv_do_drained_end() that takes a drained_end_counter pointer. We need
such a variant because now no function called anywhere from
bdrv_do_drained_end() must poll. This includes
BdrvChildRole.drained_end(), which already must not poll according to
its interface documentation, but bdrv_child_cb_drained_end() just
violates that by invoking bdrv_drained_end() (which does poll).
Therefore, BdrvChildRole.drained_end() must take a *drained_end_counter
parameter, which bdrv_child_cb_drained_end() can pass on to the new
bdrv_drained_end_no_poll() function.
Note that we now have a pattern of all drained_end-related functions
either polling or receiving a *drained_end_counter to let the caller
poll based on that.
A problem with a single poll loop is that when the drained section in
bdrv_set_aio_context_ignore() ends, some nodes in the subgraph may be in
the old contexts, while others are in the new context already. To let
the collective poll in bdrv_drained_end() work correctly, we must not
hold a lock to the old context, so that the old context can make
progress in case it is different from the current context.
(In the process, remove the comment saying that the current context is
always the old context, because it is wrong.)
In all other places, all nodes in a subtree must be in the same context,
so we can just poll that. The exception of course is
bdrv_drain_all_end(), but that always runs in the main context, so we
can just poll NULL (like bdrv_drain_all_begin() does).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions are not used outside of block/io.c, there is no reason
why they should be globally available.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5cb2737e92 laid out why
bdrv_do_drained_end() must decrement the quiesce_counter after
bdrv_drain_invoke(). It did not give a very good reason why it has to
happen after bdrv_parent_drained_end(), instead only claiming symmetry
to bdrv_do_drained_begin().
It turns out that delaying it for so long is wrong.
Situation: We have an active commit job (i.e. a mirror job) from top to
base for the following graph:
filter
|
[file]
|
v
top --[backing]--> base
Now the VM is closed, which results in the job being cancelled and a
bdrv_drain_all() happening pretty much simultaneously.
Beginning the drain means the job is paused once whenever one of its
nodes is quiesced. This is reversed when the drain ends.
With how the code currently is, after base's drain ends (which means
that it will have unpaused the job once), its quiesce_counter remains at
1 while it goes to undrain its parents (bdrv_parent_drained_end()). For
some reason or another, undraining filter causes the job to be kicked
and enter mirror_exit_common(), where it proceeds to invoke
block_job_remove_all_bdrv().
Now base will be detached from the job. Because its quiesce_counter is
still 1, it will unpause the job once more. So in total, undraining
base will unpause the job twice. Eventually, this will lead to the
job's pause_count going negative -- well, it would, were there not an
assertion against this, which crashes qemu.
The general problem is that if in bdrv_parent_drained_end() we undrain
parent A, and then undrain parent B, which then leads to A detaching the
child, bdrv_replace_child_noperm() will undrain A as if we had not done
so yet; that is, one time too many.
It follows that we cannot decrement the quiesce_counter after invoking
bdrv_parent_drained_end().
Unfortunately, decrementing it before bdrv_parent_drained_end() would be
wrong, too. Imagine the above situation in reverse: Undraining A leads
to B detaching the child. If we had already decremented the
quiesce_counter by that point, bdrv_replace_child_noperm() would undrain
B one time too little; because it expects bdrv_parent_drained_end() to
issue this undrain. But bdrv_parent_drained_end() won't do that,
because B is no longer a parent.
Therefore, we have to do something else. This patch opts for
introducing a second quiesce_counter that counts how many times a
child's parent has been quiesced (though c->role->drained_*). With
that, bdrv_replace_child_noperm() just has to undrain the parent exactly
that many times when removing a child, and it will always be right.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The commit and the mirror block job must be able to drop their filter
node at any point. However, this will not be possible if any of the
BdrvChild links to them is frozen. Therefore, we need to prevent them
from ever becoming frozen.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190703172813.6868-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch is used in the 'block/stream: introduce a bottom node'
that is following. Instead of the base node, the caller may pass
the node that has the base as its backing image to the function
bdrv_is_allocated_above() with a new parameter include_base = true
and get rid of the dependency on the base that may change during
commit/stream parallel jobs. Now, if the specified base is not
found in the backing image chain, the QEMU will abort.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1559152576-281803-2-git-send-email-andrey.shinkevich@virtuozzo.com
[mreitz: Squashed in the following as a rebase on conflicting patches:]
Message-id: e3cf99ae-62e9-8b6e-5a06-d3c8b9363b85@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
If a block node uses bdrv_child_try_set_perm() to change the permission
it takes on its child, the result may be very short-lived. If anything
makes the block layer recalculate the permissions internally, it will
invoke the node driver's .bdrv_child_perm() implementation. The
permission/shared permissions masks that returns will then override the
values previously passed to bdrv_child_try_set_perm().
If drivers want a child edge to have specific values for the
permissions/shared permissions mask, it must return them in
.bdrv_child_perm(). Consequentially, there is no need for them to pass
the same values to bdrv_child_try_set_perm() then: It is better to have
a function that invokes .bdrv_child_perm() and calls
bdrv_child_try_set_perm() with the result. This patch adds such a
function under the name of bdrv_child_refresh_perms().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop remaining users of bs->job:
1. assertions actually duplicated by assert(!bs->refcnt)
2. trace-point seems not enough reason to change stream_start to return
BlockJob pointer
3. Restricting creation of two jobs based on same bs is bad idea, as
3.1 Some jobs creates filters to be their main node, so, this check
don't actually prevent creating second job on same real node (which
will create another filter node) (but I hope it is restricted by
other mechanisms)
3.2 Even without bs->job we have two systems of permissions:
op-blockers and BLK_PERM
3.3 We may want to run several jobs on one node one day
And finally, drop bs->job pointer itself. Hurrah!
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to remove bs->job pointer. Drop it's usage in
blockdev_mark_auto_del: instead of looking at bs->job let's check all
jobs for references to bs.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to remove bs->job pointer. Drop it's usage in replication
code. Additionally we have to return job pointer from some mirror APIs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
This fixes at least one overflow in qcow2_process_discards, which
passes 64bit region length to bdrv_pdiscard where bytes (or sectors in
the past) parameter is int since its introduction in 0b919fae.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers of bdrv_set_aio_context() are eliminated now, they have
moved to bdrv_try_set_aio_context() and related safe functions. Remove
bdrv_set_aio_context().
With this, we can now know that the .set_aio_ctx callback must be
present in bdrv_set_aio_context_ignore() because
bdrv_can_set_aio_context() would have returned false previously, so
instead of checking the condition, we can assert it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
So far, we only made sure that updating the AioContext of a node
affected the whole subtree. However, if a node is newly attached to a
new parent, we also need to make sure that both the subtree of the node
and the parent are in the same AioContext. This tries to move the new
child node to the parent AioContext and returns an error if this isn't
possible.
BlockBackends now actually apply their AioContext to their root node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kenneth Heitke <kenneth.heitke@intel.com>
Reviewed-by: Klaus Birkelund Jensen <klaus.jensen@cnexlabs.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Callback-based laio_submit() and laio_cancel() were left after
rewriting Linux AIO backend to coroutines in hope that they would be
used in other code that could bypass coroutines. They can be safely
removed because they have not been used since that time.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6eb.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All block nodes and users in any connected component of the block graph
must be in the same AioContext, so changing the AioContext of one node
must not only change all of its children, but all of its parents (and
in turn their children etc.) as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit b97511c7bc, there is no reason for block drivers any more
to call these functions (see the function comment in block_int.h). They
are now just internal helper functions for bdrv_set_aio_context()
and can be made static.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Eventually, we want to make sure that all parents and all children of a
node are in the same AioContext as the node itself. This means that
changing the AioContext may fail because one of the other involved
parties (e.g. a guest device that was configured with an iothread)
cannot allow switching to a different AioContext.
Introduce a set of functions that allow to first check whether all
involved nodes can switch to a new context and only then do the actual
switch. The check recursively covers children and parents.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-9-armbru@redhat.com>
No one is using these functions anymore, all callers have switched to
the byte-based bdrv_pread() and bdrv_pwrite()
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The existing code to convert flag bits into strings looks a bit strange
now, and if we ever add more flags, it will look even stranger. Prevent
that from happening by making it look up the flag names in an array.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20190405191635.25740-1-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_snapshot_dump(), bdrv_image_info_specific_dump(),
bdrv_image_info_dump() and their helpers take an fprintf()-like
callback and a FILE * to pass to it.
hmp.c passes monitor_printf() cast to fprintf_function and the current
monitor cast to FILE *.
qemu-img.c and qemu-io-cmds.c pass fprintf and stdout.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-8-armbru@redhat.com>
qsp_report() takes an fprintf()-like callback and a FILE * to pass to
it.
Its only caller hmp_sync_profile() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-7-armbru@redhat.com>
We know that the kernel implements a slow fallback code path for
BLKZEROOUT, so if BDRV_REQ_NO_FALLBACK is given, we shouldn't call it.
The other operations we call in the context of .bdrv_co_pwrite_zeroes
should usually be quick, so no modification should be needed for them.
If we ever notice that there are additional problematic cases, we can
still make these conditional as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
For qemu-img convert, we want an operation that zeroes out the whole
image if this can be done efficiently, but that returns an error
otherwise so we don't write explicit zeroes and immediately overwrite
them with the real data, potentially doubling the amount of data to be
written.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
If we reopen a BlockDriverState and there is an option that is present
in bs->options but missing from the new set of options then we have to
return an error unless the driver is able to reset it to its default
value.
This patch adds a new 'mutable_opts' field to BlockDriver. This is
a list of runtime options that can be modified during reopen. If an
option in this list is unspecified on reopen then it must be reset (or
return an error).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch allows the user to change the backing file of an image that
is being reopened. Here's what it does:
- In bdrv_reopen_prepare(): check that the value of 'backing' points
to an existing node or is null. If it points to an existing node it
also needs to make sure that replacing the backing file will not
create a cycle in the node graph (i.e. you cannot reach the parent
from the new backing file).
- In bdrv_reopen_commit(): perform the actual node replacement by
calling bdrv_set_backing_hd().
There may be temporary implicit nodes between a BDS and its backing
file (e.g. a commit filter node). In these cases bdrv_reopen_prepare()
looks for the real (non-implicit) backing file and requires that the
'backing' option points to it. Replacing or detaching a backing file
is forbidden if there are implicit nodes in the middle.
Although x-blockdev-reopen is meant to be used like blockdev-add,
there's an important thing that must be taken into account: the only
way to set a new backing file is by using a reference to an existing
node (previously added with e.g. blockdev-add). If 'backing' contains
a dictionary with a new set of options ({"driver": "qcow2", "file": {
... }}) then it is interpreted that the _existing_ backing file must
be reopened with those options.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Children in QMP are specified with BlockdevRef / BlockdevRefOrNull,
which can contain a set of child options, a child reference, or
NULL. In optional attributes like "backing" it can also be missing.
Only the first case (set of child options) is being handled properly
by bdrv_reopen_queue(). This patch deals with all the others.
Here's how these cases should be handled when bdrv_reopen_queue() is
deciding what to do with each child of a BlockDriverState:
1) Set of child options: if the child was implicitly created (i.e
inherits_from points to the parent) then the options are removed
from the parent's options QDict and are passed to the child with
a recursive bdrv_reopen_queue() call. This case was already
working fine.
2) Child reference: there's two possibilites here.
2a) Reference to the current child: if the child was implicitly
created then it is put in the reopen queue, keeping its
current set of options (since this was a child reference
there was no way to specify a different set of options).
If the child is not implicit then it keeps its current set
of options but it is not reopened (and therefore does not
inherit any new option from the parent).
2b) Reference to a different BDS: the current child is not put
in the reopen queue at all. Passing a reference to a
different BDS can be used to replace a child, although at
the moment no driver implements this, so it results in an
error. In any case, the current child is not going to be
reopened (and might in fact disappear if it's replaced)
3) NULL: This is similar to (2b). Although no driver allows this
yet it can be used to detach the current child so it should not
be put in the reopen queue.
4) Missing option: at the moment "backing" is the only case where
this can happen. With "blockdev-add", leaving "backing" out
means that the default backing file is opened. We don't want to
open a new image during reopen, so we require that "backing" is
always present. We'll relax this requirement a bit in the next
patch. If keep_old_opts is true and "backing" is missing then
this behaves like 2a (the current child is reopened).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_reopen_queue() function is used to create a queue with
the BDSs that are going to be reopened and their new options. Once
the queue is ready bdrv_reopen_multiple() is called to perform the
operation.
The original options from each one of the BDSs are kept, with the new
options passed to bdrv_reopen_queue() applied on top of them.
For "x-blockdev-reopen" we want a function that behaves much like
"blockdev-add". We want to ignore the previous set of options so that
only the ones actually specified by the user are applied, with the
rest having their default values.
One of the things that we need is a way to tell bdrv_reopen_queue()
whether we want to keep the old set of options or not, and that's what
this patch does. All current callers are setting this new parameter to
true and x-blockdev-reopen will set it to false.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our permission system is useful to define what operations are allowed
on a certain block node and includes things like BLK_PERM_WRITE or
BLK_PERM_RESIZE among others.
One of the permissions is BLK_PERM_GRAPH_MOD which allows "changing
the node that this BdrvChild points to". The exact meaning of this has
never been very clear, but it can be understood as "change any of the
links connected to the node". This can be used to prevent changing a
backing link, but it's too coarse.
This patch adds a new 'frozen' attribute to BdrvChild, which forbids
detaching the link from the node it points to, and new API to freeze
and unfreeze a backing chain.
After this change a few functions can fail, so they need additional
checks.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit a88b179f introduced the ability to set and query bitmap
persistence, but with an atypical spelling.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20190308205845.25734-1-eblake@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of checking against busy, inconsistent, or read only directly,
use a check function with permissions bits that let us streamline the
checks without reproducing them in many places.
Included in this patch are permissions changes that simply add the
inconsistent check to existing permissions call spots, without
addressing existing bugs.
In general, this means that busy+readonly checks become BDRV_BITMAP_DEFAULT,
which checks against all three conditions. busy-only checks become
BDRV_BITMAP_ALLOW_RO.
Notably, remove allows inconsistent bitmaps, so it doesn't follow the pattern.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add an inconsistent bit to dirty-bitmaps that allows us to report a bitmap as
persistent but potentially inconsistent, i.e. if we find bitmaps on a qcow2
that have been marked as "in use".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These mean the same thing now. Unify them and rename the merged call
bdrv_dirty_bitmap_busy to indicate semantically what we are describing,
as well as help disambiguate from the various _locked and _unlocked
versions of bitmap helpers that refer to mutex locks.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
"Frozen" was a good description a long time ago, but it isn't adequate now.
Rename the frozen predicate to has_successor to make the semantics of the
predicate more clear to outside callers.
In the process, remove some calls to frozen() that no longer semantically
make sense. For bdrv_enable_dirty_bitmap_locked and
bdrv_disable_dirty_bitmap_locked, it doesn't make sense to prohibit QEMU
internals from performing this action when we only wished to prohibit QMP
users from issuing these commands. All of the QMP API commands for bitmap
manipulation already check against user_locked() to prohibit these actions.
Several other assertions really want to check that the bitmap isn't in-use
by another operation -- use the bitmap_user_locked function for this instead,
which presently also checks for has_successor. This leaves some redundant
checks of has_successor through different helpers that are addressed in
forthcoming patches.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Provide an option to force QEMU to always keep the external data file
consistent as a standalone read-only raw image.
At the moment, this means making sure that write_zeroes requests are
forwarded to the data file instead of just updating the metadata, and
checking that no backing file is used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_iterate_format (which is currently only used for printing out the
formats supported by the block layer) doesn't take format whitelisting
into account.
This creates a problem for tests: they enumerate supported formats to
decide which tests to enable, but then discover that QEMU doesn't let
them actually use some of those formats.
To avoid that, exclude formats that are not whitelisted from
enumeration, if whitelisting is in use. Since we have separate
whitelists for r/w and r/o, take this a parameter to
bdrv_iterate_format, and print two lists of supported formats (r/w and
r/o) in main qemu.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As with the previous patch to qemu-nbd, the nbd-server-start QMP command
also needs to be able to specify authorization when enabling TLS encryption.
First the client must create a QAuthZ object instance using the
'object-add' command:
{
'execute': 'object-add',
'arguments': {
'qom-type': 'authz-list',
'id': 'authz0',
'parameters': {
'policy': 'deny',
'rules': [
{
'match': '*CN=fred',
'policy': 'allow'
}
]
}
}
}
They can then reference this in the new 'tls-authz' parameter when
executing the 'nbd-server-start' command:
{
'execute': 'nbd-server-start',
'arguments': {
'addr': {
'type': 'inet',
'host': '127.0.0.1',
'port': '9000'
},
'tls-creds': 'tls0',
'tls-authz': 'authz0'
}
}
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20190227162035.18543-3-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently any client which can complete the TLS handshake is able to use
the NBD server. The server admin can turn on the 'verify-peer' option
for the x509 creds to require the client to provide a x509 certificate.
This means the client will have to acquire a certificate from the CA
before they are permitted to use the NBD server. This is still a fairly
low bar to cross.
This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which
takes the ID of a previously added 'QAuthZ' object instance. This will
be used to validate the client's x509 distinguished name. Clients
failing the authorization check will not be permitted to use the NBD
server.
For example to setup authorization that only allows connection from a client
whose x509 certificate distinguished name is
CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB
escape the commas in the name and use:
qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
--object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\
O=Example Org,,L=London,,ST=London,,C=GB' \
--tls-creds tls0 \
--tls-authz authz0 \
....other qemu-nbd args...
NB: a real shell command line would not have leading whitespace after
the line continuation, it is just included here for clarity.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20190227162035.18543-2-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: split long line in --help text, tweak 233 to show that whitespace
after ,, in identity= portion is actually okay]
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, BlockDriver.bdrv_refresh_filename() is supposed to both
refresh the filename (BDS.exact_filename) and set BDS.full_open_options.
Now that we have generic code in the central bdrv_refresh_filename() for
creating BDS.full_open_options, we can drop the latter part from all
BlockDriver.bdrv_refresh_filename() implementations.
This also means that we can drop all of the existing default code for
this from the global bdrv_refresh_filename() itself.
Furthermore, we now have to call BlockDriver.bdrv_refresh_filename()
after having set BDS.full_open_options, because the block driver's
implementation should now be allowed to depend on BDS.full_open_options
being set correctly.
Finally, with this patch we can drop the @options parameter from
BlockDriver.bdrv_refresh_filename(); also, add a comment on this
function's purpose in block/block_int.h while touching its interface.
This completely obsoletes blklogwrite's implementation of
.bdrv_refresh_filename().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-25-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some follow-up patches will rework the way bs->full_open_options is
refreshed in bdrv_refresh_filename(). The new implementation will remove
the need for the block drivers' bdrv_refresh_filename() implementations
to set bs->full_open_options; instead, it will be generic and use static
information from each block driver.
However, by implementing bdrv_gather_child_options(), block drivers will
still be able to override the way the full_open_options of their
children are incorporated into their own.
We need to implement this function for VMDK because we have to prevent
the generic implementation from gathering the options of all children:
It is not possible to specify options for the extents through the
runtime options.
For quorum, the child names that would be used by the generic
implementation and the ones that we actually (currently) want to use
differ. See quorum_gather_child_options() for more information.
Note that both of these are cases which are not ideal: In case of VMDK
it would probably be nice to be able to specify options for all extents.
In case of quorum, the current runtime option structure is simply broken
and needs to be fixed (but that is left for another patch).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-23-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This new field can be set by block drivers to list the runtime options
they accept that may influence the contents of the respective BDS. As of
a follow-up patch, this list will be used by the common
bdrv_refresh_filename() implementation to decide which options to put
into BDS.full_open_options (and consequently whether a JSON filename has
to be created), thus freeing the drivers of having to implement that
logic themselves.
Additionally, this patch adds the field to all of the block drivers that
need it and sets it accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-22-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function may be implemented by block drivers to derive a directory
name from a BDS. Concatenating this g_free()-able string with a relative
filename must result in a valid (not necessarily existing) filename, so
this is a function that should generally be not implemented by format
drivers, because this is protocol-specific.
If a BDS's driver does not implement this function, bdrv_dirname() will
fall through to the BDS's file if it exists. If it does not, the
exact_filename field will be used to generate a directory name.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-15-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make bdrv_get_full_backing_filename() return an allocated string instead
of placing the result in a caller-provided buffer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make bdrv_get_full_backing_filename_from_filename() return an allocated
string instead of placing the result in a caller-provided buffer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Besides being safe for arbitrary path lengths, after some follow-up
patches all callers will want a freshly allocated buffer anyway.
In the meantime, path_combine_deprecated() is added which has the same
interface as path_combine() had before this patch. All callers to that
function will be converted in follow-up patches.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20190201192935.18394-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the backing file is overridden, this most probably does change the
guest-visible data of a BDS. Therefore, we will need to consider this
in bdrv_refresh_filename().
To see whether it has been overridden, we might want to compare
bs->backing_file and bs->backing->bs->filename. However,
bs->backing_file is changed by bdrv_set_backing_hd() (which is just used
to change the backing child at runtime, without modifying the image
header), so bs->backing_file most of the time simply contains a copy of
bs->backing->bs->filename anyway, so it is useless for such a
comparison.
This patch adds an auto_backing_file BDS field which contains the
backing file path as indicated by the image header, which is not changed
by bdrv_set_backing_hd().
Because of bdrv_refresh_filename() magic, however, a BDS's filename may
differ from what has been specified during bdrv_open(). Then, the
comparison between bs->auto_backing_file and bs->backing->bs->filename
may fail even though bs->backing was opened from bs->auto_backing_file.
To mitigate this, we can copy the real BDS's filename (after the whole
bdrv_open() and bdrv_refresh_filename() process) into
bs->auto_backing_file, if we know the former has been opened based on
the latter. This is only possible if no options modifying the backing
file's behavior have been specified, though. To simplify things, this
patch only copies the filename from the backing file if no options have
been specified for it at all.
Furthermore, there are cases where an overlay is created by qemu which
already contains a BDS's filename (e.g. in blockdev-snapshot-sync). We
do not need to worry about updating the overlay's bs->auto_backing_file
there, because we actually wrote a post-bdrv_refresh_filename() filename
into the image header.
So all in all, there will be false negatives where (as of a future
patch) bdrv_refresh_filename() will assume that the backing file differs
from what was specified in the image header, even though it really does
not. However, these cases should be limited to where (1) the user
actually did override something in the backing chain (e.g. by specifying
options for the backing file), or (2) the user executed a QMP command to
change some node's backing file (e.g. change-backing-file or
block-commit with @backing-file given) where the given filename does not
happen to coincide with qemu's idea of the backing BDS's filename.
Then again, (1) really is limited to -drive. With -blockdev or
blockdev-add, you have to adhere to the schema, so a user cannot give
partial "unimportant" options (e.g. by just setting backing.node-name
and leaving the rest to the image header). Therefore, trying to fix
this would mean trying to fix something for -drive only.
To improve on (2), we would need a full infrastructure to "canonicalize"
an arbitrary filename (+ options), so it can be compared against
another. That seems a bit over the top, considering that filenames
nowadays are there mostly for the user's entertainment.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Before this patch, bdrv_refresh_filename() is used in a pushing manner:
Whenever the BDS graph is modified, the parents of the modified edges
are supposed to be updated (recursively upwards). However, that is
nonviable, considering that we want child changes not to concern
parents.
Also, in the long run we want a pull model anyway: Here, we would have a
bdrv_filename() function which returns a BDS's filename, freshly
constructed.
This patch is an intermediate step. It adds bdrv_refresh_filename()
calls before every place a BDS.filename value is used. The only
exceptions are protocol drivers that use their own filename, which
clearly would not profit from refreshing that filename before.
Also, bdrv_get_encrypted_filename() is removed along the way (as a user
of BDS.filename), since it is completely unused.
In turn, all of the calls to bdrv_refresh_filename() before this patch
are removed, because we no longer have to call this function on graph
changes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_check_perm in it's recursion checks each node in context of new
permissions for one parent, because of nature of DFS. It works well,
while children subgraph of top-most updated node is a tree, i.e. it
doesn't have any kind of loops. But if we have a loop (not oriented,
of course), i.e. we have two different ways from top-node to some
child-node, then bdrv_check_perm will do wrong thing:
top
| \
| |
v v
A B
| |
v v
node
It will once check new permissions of node in context of new A
permissions and old B permissions and once visa-versa. It's a wrong way
and may lead to corruption of permission system. We may start with
no-permissions and all-shared for both A->node and B->node relations
and finish up with non shared write permission for both ways.
The following commit will add a test, which shows this bug.
To fix this situation, let's really set BdrvChild permissions during
bdrv_check_perm procedure. And we are happy here, as check-perm is
already written in transaction manner, so we just need to restore
backed-up permissions in _abort.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of using the convenience wrapper qio_channel_read_all_eof(), use
the lower level QIOChannel API. This means duplicating some code, but
we'll need this because this coroutine yield is special: We want it to
be interruptible so that nbd_client_attach_aio_context() can correctly
reenter the coroutine.
This moves the bdrv_dec/inc_in_flight() pair into nbd_read_eof(), so
that connection_co will always sit in this exact qio_channel_yield()
call when bdrv_drain() returns.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The only caller of nbd_read_eof() is nbd_receive_reply(), so it doesn't
have to live in the header file, but can move next to its caller.
Also add the missing coroutine_fn to the function and its caller.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
