Commit Graph

257 Commits

Author SHA1 Message Date
Markus Armbruster
db8227a68a spapr/pci: Correct "does not support hotplugging error messages
When dynamic-reconfiguration is off, hot plug / unplug can fail with
"Bus 'spapr-pci-host-bridge' does not support hotplugging".
spapr-pci-host-bridge is a device, not a bus.  Report the name of the
bus it provides instead: 'pci.0'.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-2-armbru@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-11-17 10:07:52 +01:00
Yi Liu
ba7d12eb8c hw/pci: modify pci_setup_iommu() to set PCIIOMMUOps
This patch modifies pci_setup_iommu() to set PCIIOMMUOps
instead of setting PCIIOMMUFunc. PCIIOMMUFunc is used to
get an address space for a PCI device in vendor specific
way. The PCIIOMMUOps still offers this functionality. But
using PCIIOMMUOps leaves space to add more iommu related
vendor specific operations.

Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Yi Sun <yi.y.sun@linux.intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[ clg: - refreshed on latest QEMU
       - included hw/remote/iommu.c
       - documentation update
       - asserts in pci_setup_iommu()
       - removed checks on iommu_bus->iommu_ops->get_address_space
       - included Elroy PCI host (PA-RISC) ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
2023-11-03 09:20:31 +01:00
Cédric Le Goater
15675f2318 spapr/pci: Clean up local variable shadowing in spapr_phb_realize()
Rename SysBusDevice variable to avoid this warning :

  ../hw/ppc/spapr_pci.c: In function ‘spapr_phb_realize’:
  ../hw/ppc/spapr_pci.c:1872:24: warning: declaration of ‘s’ shadows a previous local [-Wshadow=local]
   1872 |         SpaprPhbState *s;
        |                        ^
  ../hw/ppc/spapr_pci.c:1829:19: note: shadowed declaration is here
   1829 |     SysBusDevice *s = SYS_BUS_DEVICE(dev);
        |                   ^

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230918145850.241074-8-clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2023-09-29 10:07:18 +02:00
Cédric Le Goater
44fa20c928 spapr: Remove support for NVIDIA V100 GPU with NVLink2
NVLink2 support was removed from the PPC PowerNV platform and VFIO in
Linux 5.13 with commits :

  562d1e207d32 ("powerpc/powernv: remove the nvlink support")
  b392a1989170 ("vfio/pci: remove vfio_pci_nvlink2")

This was 2.5 years ago. Do the same in QEMU with a revert of commit
ec132efaa8 ("spapr: Support NVIDIA V100 GPU with NVLink2"). Some
adjustements are required on the NUMA part.

Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230918091717.149950-1-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-09-18 07:25:28 -03:00
Igor Mammedov
ad4942746c pci: drop redundant PCIDeviceClass::is_bridge field
and use cast to TYPE_PCI_BRIDGE instead.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221129101341.185621-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
2022-12-21 07:32:24 -05:00
Peter Maydell
0a3364043d hw/ppc/spapr_pci.c: Use device_cold_reset() rather than device_legacy_reset()
In spapr_phb_children_reset() we call device_legacy_reset() to reset any
QOM children of the SPAPR PCI host bridge device. This will not reset
any qbus such a child might own. Switch to device_cold_reset(), which will
reset both the device and its buses. (If the child has no qbuses then
there will be no change in behaviour.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221014142841.2092784-1-peter.maydell@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17 16:15:10 -03:00
Paolo Bonzini
c4ef328bdc spapr_pci: fix leak in spapr_phb_vfio_get_loc_code
Overwriting "path" in the second call to g_strdup_printf() causes a memory leak,
even if the variable itself is g_autofree.

Reported by Coverity as CID 1460454.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-18 09:17:40 +02:00
Alexey Kardashevskiy
c0e765dafb spapr/ddw: Implement 64bit query extension
PAPR 2.8 (2018) defines an extension to return 64bit value for
the largest TCE block in "ibm,query-pe-dma-window". Recent Linux kernels
support this already.

This adds the extension and supports the older format.

This advertises a bigger window for the new format as the biggest
window with 2M pages below the start of the 64bit window as it is
the maximum we will see in practice.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220623073136.1380214-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-07-06 10:22:37 -03:00
Alexey Kardashevskiy
31cc81f728 spapr/ddw: Reset DMA when the last non-default window is removed
PAPR+/LoPAPR says:
===
The platform must restore the default DMA window for the PE on a call
to the ibm,remove-pe-dma-window RTAS call when all of the following
are true:
 a. The call removes the last DMA window remaining for the PE.
 b. The DMA window being removed is not the default window

===

This resets DMA as PAPR mandates.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220622052955.1069903-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-07-06 10:22:37 -03:00
Marc-André Lureau
8e3b0cbb72 Replace qemu_real_host_page variables with inlined functions
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.

This avoids the need for a constructor initialization too.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06 10:50:38 +02:00
Peter Xu
2914fc61d5 pci: Export pci_for_each_device_under_bus*()
They're actually more commonly used than the helper without _under_bus, because
most callers do have the pci bus on hand.  After exporting we can switch a lot
of the call sites to use these two helpers.

Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20211028043129.38871-3-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2021-11-01 19:36:11 -04:00
David Gibson
a4e4c4b45f spapr_pci: Fix leak in spapr_phb_vfio_get_loc_code() with g_autofree
This uses g_autofree to simplify logic in spapr_phb_vfio_get_loc_code(),
in the process fixing a leak in one of the paths.  I'm told this fixes
Coverity error CID 1460454

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 16b0ea1d85 ("spapr_pci: populate ibm,loc-code")
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-08-27 12:41:12 +10:00
Thomas Huth
ee86213aa3 Do not include exec/address-spaces.h if it's not really necessary
Stop including exec/address-spaces.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:51 +02:00
Thomas Huth
2068cabd3f Do not include cpu.h if it's not really necessary
Stop including cpu.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:51 +02:00
Daniel Henrique Barboza
e35dfbd227 spapr_pci.c: add 'unplug already in progress' message for PCI unplug
Hotunplug for all other devices are warning the user when the hotunplug
is already in progress. Do the same for PCI devices in
spapr_pci_unplug_request().

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210226163301.419727-5-danielhb413@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-03-10 09:07:09 +11:00
Daniel Henrique Barboza
a03509cd2b spapr: rename spapr_drc_detach() to spapr_drc_unplug_request()
spapr_drc_detach() is not the best name for what the function does. The
function does not detach the DRC, it makes an uncommited attempt to do
it.  It'll mark the DRC as pending unplug, via the 'unplug_request'
flag, and only if the DRC state is drck->empty_state it will detach the
DRC, via spapr_drc_release().

This is a contrast with its pair spapr_drc_attach(), where the function
is indeed creating the DRC QOM object. If you know what
spapr_drc_attach() does, you can be misled into thinking that
spapr_drc_detach() is removing the DRC from QEMU internal state, which
isn't true.

The current role of this function is better described as a request for
detach, since there's no guarantee that we're going to detach the DRC in
the end.  Rename the function to spapr_drc_unplug_request to reflect
what is is doing.

The initial idea was to change the name to spapr_drc_detach_request(),
and later on change the unplug_request flag to detach_request. However,
unplug_request is a migratable boolean for a long time now and renaming
it is not worth the trouble. spapr_drc_unplug_request() setting
drc->unplug_request is more natural than spapr_drc_detach_request
setting drc->unplug_request.

Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210222194531.62717-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-03-10 09:07:08 +11:00
Greg Kurz
040bdafce1 spapr: Adjust firmware path of PCI devices
It is currently not possible to perform a strict boot from USB storage:

$ qemu-system-ppc64 -accel kvm -nodefaults -nographic -serial stdio \
	-boot strict=on \
	-device qemu-xhci \
	-device usb-storage,drive=disk,bootindex=0 \
	-blockdev driver=file,node-name=disk,filename=fedora-ppc64le.qcow2

SLOF **********************************************************************
QEMU Starting
 Build Date = Jul 17 2020 11:15:24
 FW Version = git-e18ddad8516ff2cf
 Press "s" to enter Open Firmware.

Populating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
Populating /pci@800000020000000
                     00 0000 (D) : 1b36 000d    serial bus [ usb-xhci ]
No NVRAM common partition, re-initializing...
Scanning USB
  XHCI: Initializing
    USB Storage
       SCSI: Looking for devices
          101000000000000 DISK     : "QEMU     QEMU HARDDISK    2.5+"
Using default console: /vdevice/vty@71000000

  Welcome to Open Firmware

  Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
  This program and the accompanying materials are made available
  under the terms of the BSD License available at
  http://www.opensource.org/licenses/bsd-license.php

Trying to load:  from: /pci@800000020000000/usb@0/storage@1/disk@101000000000000 ...
E3405: No such device

E3407: Load failed

  Type 'boot' and press return to continue booting the system.
  Type 'reset-all' and press return to reboot the system.

Ready!
0 >

The device tree handed over by QEMU to SLOF indeed contains:

qemu,boot-list =
	"/pci@800000020000000/usb@0/storage@1/disk@101000000000000 HALT";

but the device node is named usb-xhci@0, not usb@0.

This happens because the firmware names of PCI devices returned
by get_boot_devices_list() come from pcibus_get_fw_dev_path(),
while the sPAPR PHB code uses a different naming scheme for
device nodes. This inconsistency has always been there but it was
hidden for a long time because SLOF used to rename USB device
nodes, until this commit, merged in QEMU 4.2.0 :

commit 85164ad4ed
Author: Alexey Kardashevskiy <aik@ozlabs.ru>
Date:   Wed Sep 11 16:24:32 2019 +1000

    pseries: Update SLOF firmware image

    This fixes USB host bus adapter name in the device tree to match QEMU's
    one.

    Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Fortunately, sPAPR implements the firmware path provider interface.
This provides a way to override the default firmware paths.

Just factor out the sPAPR PHB naming logic from spapr_dt_pci_device()
to a helper, and use it in the sPAPR firmware path provider hook.

Fixes: 85164ad4ed ("pseries: Update SLOF firmware image")
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210122170157.246374-1-groug@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-02-10 10:43:50 +11:00
Peter Maydell
41d306ec7d * Fuzzing improvements (Qiuhao, Alexander)
* i386: Fix BMI decoding for instructions with the 0x66 prefix (David)
 * initial attempt at fixing event_notifier emulation (Maxim)
 * i386: PKS emulation, fix for "qemu-system-i386 -cpu host" (myself)
 * meson: RBD test fixes (myself)
 * meson: TCI warnings (Philippe)
 * Leaner build for --disable-guest-agent, --disable-system and
   --disable-tools (Philippe, Stefan)
 * --enable-tcg-interpreter fix (Richard)
 * i386: SVM feature bits (Wei)
 * KVM bugfix (Thomas H.)
 * Add missing MemoryRegionOps callbacks (PJP)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmAhR4cUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroOviAf/Ymk/KwHZKySVqHOjDZnvP5PXMAru
 p1zlMRLAorXK+CTbshkIliaQyD8ggzT4HCinJ2NisdfTWMmlWbgr8gahNqKyZ5UG
 HlL28va3dvGhelswh/CNso1ZhVb2Q+aAYn/c6LXQva2r0xi26ohJTkIkSCPP/bnI
 +73dGzwAilBOsBVbn4cCm/70XtwDpPkw41IZIDoy/4lhL8ZdpHMz8oOjNIlOdlcU
 aEDfM8vYE4C70OtUlRZ1OwVxzcjS1Bf6dQYcpg5gAKy/jAAqR+v2PStxXiUuj5D3
 cAzd03Goh78Wcre+CbWxDKGcGtiooUT+J09wmvDPYVUHcpQMbumf4MufrQ==
 =INB5
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Fuzzing improvements (Qiuhao, Alexander)
* i386: Fix BMI decoding for instructions with the 0x66 prefix (David)
* initial attempt at fixing event_notifier emulation (Maxim)
* i386: PKS emulation, fix for "qemu-system-i386 -cpu host" (myself)
* meson: RBD test fixes (myself)
* meson: TCI warnings (Philippe)
* Leaner build for --disable-guest-agent, --disable-system and
  --disable-tools (Philippe, Stefan)
* --enable-tcg-interpreter fix (Richard)
* i386: SVM feature bits (Wei)
* KVM bugfix (Thomas H.)
* Add missing MemoryRegionOps callbacks (PJP)

# gpg: Signature made Mon 08 Feb 2021 14:15:35 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (46 commits)
  target/i386: Expose VMX entry/exit load pkrs control bits
  target/i386: Add support for save/load IA32_PKRS MSR
  imx7-ccm: add digprog mmio write method
  tz-ppc: add dummy read/write methods
  spapr_pci: add spapr msi read method
  nvram: add nrf51_soc flash read method
  prep: add ppc-parity write method
  vfio: add quirk device write method
  pci-host: designware: add pcie-msi read method
  hw/pci-host: add pci-intack write method
  cpu-throttle: Remove timer_mod() from cpu_throttle_set()
  replay: rng-builtin support
  pc-bios/descriptors: fix paths in json files
  replay: fix replay of the interrupts
  accel/kvm/kvm-all: Fix wrong return code handling in dirty log code
  qapi/meson: Restrict UI module to system emulation and tools
  qapi/meson: Restrict system-mode specific modules
  qapi/meson: Remove QMP from user-mode emulation
  qapi/meson: Restrict qdev code to system-mode emulation
  meson: Restrict emulation code
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-09 10:04:51 +00:00
Prasad J Pandit
921604e175 spapr_pci: add spapr msi read method
Add spapr msi mmio read method to avoid NULL pointer dereference
issue.

Reported-by: Lei Sun <slei.casper@gmail.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20200811114133.672647-7-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-08 15:15:32 +01:00
Jinhao Gao
e6ddad1fd5 spapr_pci: Fix memory leak of vmstate_spapr_pci
When VM migrate VMState of spapr_pci, the field(msi_devs) of spapr_pci
having a flag of VMS_ALLOC need to allocate memory. If the src doesn't free
memory of msi_devs in SaveStateEntry of spapr_pci after QEMUFile save
VMState of spapr_pci, it may result in memory leak of msi_devs. We add the
post_save func to free memory, which prevents memory leak.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Jinhao Gao <gaojinhao@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20201231061020.828-2-gaojinhao@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Greg Kurz
56cca10eb5 spapr: Don't use qdev_get_machine() in spapr_msi_write()
spapr_phb_realize() passes the sPAPR machine state as opaque data
for the I/O callbacks:

memory_region_init_io(&sphb->msiwindow, OBJECT(sphb), &spapr_msi_ops, spapr,
                                                                      ^^^^^
                      "msi", msi_window_size);

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201209170052.1431440-5-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-12-14 15:54:12 +11:00
Greg Kurz
c4c81d7d51 spapr: Pass sPAPR machine state down to spapr_pci_switch_vga()
This allows to drop a user of qdev_get_machine().

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201209170052.1431440-4-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-12-14 15:54:12 +11:00
Greg Kurz
bc370a659a spapr: spapr_drc_attach() cannot fail
All users are passing &error_abort already. Document the fact
that spapr_drc_attach() should only be passed a free DRC, which
is supposedly the case if appropriate checking is done earlier.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-5-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-12-14 15:54:12 +11:00
Greg Kurz
9e4dc0a1c2 spapr: Do PCI device hotplug sanity checks at pre-plug only
The PHB acts as the hotplug handler for PCI devices. It does some
sanity checks on DR enablement, PCI bridge chassis numbers and
multifunction. These checks are currently performed at plug time,
but they would best sit in a pre-plug handler in order to error
out as early as possible.

Create a spapr_pci_pre_plug() handler and move all the checking
there. Add a check that the associated DRC doesn't already have
an attached device. This is equivalent to the slot availability
check performed by do_pci_register_device() upon realization of
the PCI device.

This allows to pass &error_abort to spapr_drc_attach() and to end
up with a plug handler that doesn't need to report errors anymore.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-2-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-12-14 15:50:55 +11:00
Julia Suvorova
3298bbce1b hw/pci: Fix typo in PCI hot-plug error message
'occupied' is spelled like 'ocuppied' in the message.

Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006133958.600932-1-jusual@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-10-13 13:33:45 +02:00
Greg Kurz
17548fe64a spapr: Add a return value to spapr_drc_attach()
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-9-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-10-09 10:15:06 +11:00
Gerd Hoffmann
97a0530bb7 ppc/pseries: enable big-endian-framebuffer quirk for bochs-display and virtio-vga
Already done for stdvga and secondary-vga, bochs-display and virtio-vga
support the big-endian-framebuffer property too.  Fixes blue console
background at boot (offb firmware console).

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1881912
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200928085335.21961-3-kraxel@redhat.com
2020-09-29 10:08:25 +02:00
Daniel Henrique Barboza
f1aa45fffe spapr: introduce SpaprMachineState::numa_assoc_array
The next step to centralize all NUMA/associativity handling in
the spapr machine is to create a 'one stop place' for all
things ibm,associativity.

This patch introduces numa_assoc_array, a 2 dimensional array
that will store all ibm,associativity arrays of all NUMA nodes.
This array is initialized in a new spapr_numa_associativity_init()
function, called in spapr_machine_init(). It is being initialized
with the same values used in other ibm,associativity properties
around spapr files (i.e. all zeros, last value is node_id).
The idea is to remove all hardcoded definitions and FDT writes
of ibm,associativity arrays, doing instead a call to the new
helper spapr_numa_write_associativity_dt() helper, that will
be able to write the DT with the correct values.

We'll start small, handling the trivial cases first. The
remaining instances of ibm,associativity will be handled
next.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200903220639.563090-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-09-08 10:08:43 +10:00
Greg Kurz
4a6891b838 spapr: Simplify error handling in spapr_phb_realize()
The spapr_phb_realize() function has a local_err variable which
is used to:

1) check failures of spapr_irq_findone() and spapr_irq_claim()

2) prepend extra information to the error message

Recent work from Markus Armbruster highlighted we get better
code when testing the return value of a function, rather than
setting up all the local_err boiler plate. For similar reasons,
it is now preferred to use ERRP_GUARD() and error_prepend()
rather than error_propagate_prepend().

Since spapr_irq_findone() and spapr_irq_claim() return negative
values in case of failure, do both changes.

This is just cleanup, no functional impact.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <159707843851.1489912.6108405733810934642.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-08-13 21:00:52 +10:00
Reza Arbab
a6030d7e0b spapr: Add a new level of NUMA for GPUs
NUMA nodes corresponding to GPU memory currently have the same
affinity/distance as normal memory nodes. Add a third NUMA associativity
reference point enabling us to give GPU nodes more distance.

This is guest visible information, which shouldn't change under a
running guest across migration between different qemu versions, so make
the change effective only in new (pseries > 5.0) machine types.

Before, `numactl -H` output in a guest with 4 GPUs (nodes 2-5):

node distances:
node   0   1   2   3   4   5
  0:  10  40  40  40  40  40
  1:  40  10  40  40  40  40
  2:  40  40  10  40  40  40
  3:  40  40  40  10  40  40
  4:  40  40  40  40  10  40
  5:  40  40  40  40  40  10

After:

node distances:
node   0   1   2   3   4   5
  0:  10  40  80  80  80  80
  1:  40  10  80  80  80  80
  2:  80  80  10  80  80  80
  3:  80  80  80  10  80  80
  4:  80  80  80  80  10  80
  5:  80  80  80  80  80  10

These are the same distances as on the host, mirroring the change made
to host firmware in skiboot commit f845a648b8cb ("numa/associativity:
Add a new level of NUMA for GPU's").

Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Message-Id: <20200716225655.24289-1-arbab@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-07-20 09:21:39 +10:00
Greg Kurz
a4beb5f5d4 spapr_pci: Robustify support of PCI bridges
Some recent error handling cleanups unveiled issues with our support of
PCI bridges:

1) QEMU aborts when using non-standard PCI bridge types,
   unveiled by commit 7ef1553dac "spapr_pci: Drop some dead error handling"

$ qemu-system-ppc64 -M pseries -device pcie-pci-bridge
Unexpected error in object_property_find() at qom/object.c:1240:
qemu-system-ppc64: -device pcie-pci-bridge: Property '.chassis_nr' not found
Aborted (core dumped)

This happens because we assume all PCI bridge types to have a "chassis_nr"
property. This property only exists with the standard PCI bridge type
"pci-bridge" actually. We could possibly revert 7ef1553dac but it seems
much simpler to check the presence of "chassis_nr" earlier.

2) QEMU abort if same "chassis_nr" value is used several times,
   unveiled by commit d2623129a7 "qom: Drop parameter @errp of
   object_property_add() & friends"

$ qemu-system-ppc64 -M pseries -device pci-bridge,chassis_nr=1 \
                        -device pci-bridge,chassis_nr=1
Unexpected error in object_property_try_add() at qom/object.c:1167:
qemu-system-ppc64: -device pci-bridge,chassis_nr=1: attempt to add duplicate property '40000100' to object (type 'container')
Aborted (core dumped)

This happens because we assume that "chassis_nr" values are unique, but
nobody enforces that and we end up generating duplicate DRC ids. The PCI
code doesn't really care for duplicate "chassis_nr" properties since it
is only used to initialize the "Chassis Number Register" of the bridge,
with no functional impact on QEMU. So, even if passing the same value
several times might look weird, it never broke anything before, so
I guess we don't necessarily want to enforce strict checking in the PCI
code now.

Workaround both issues in the PAPR code: check that the bridge has a
unique and non null "chassis_nr" when plugging it into its parent bus.

Fixes: 05929a6c5d ("spapr: Don't use bus number for building DRC ids")
Fixes: 7ef1553dac ("spapr_pci: Drop some dead error handling")
Fixes: d2623129a7 ("qom: Drop parameter @errp of object_property_add() & friends")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159431476748.407044.16711294833569014964.stgit@bahia.lan>
[dwg: Move check slightly to a better place]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-07-20 09:21:39 +10:00
Markus Armbruster
dcfe480544 error: Avoid unnecessary error_propagate() after error_setg()
Replace

    error_setg(&err, ...);
    error_propagate(errp, err);

by

    error_setg(errp, ...);

Related pattern:

    if (...) {
        error_setg(&err, ...);
        goto out;
    }
    ...
 out:
    error_propagate(errp, err);
    return;

When all paths to label out are that way, replace by

    if (...) {
        error_setg(errp, ...);
        return;
    }

and delete the label along with the error_propagate().

When we have at most one other path that actually needs to propagate,
and maybe one at the end that where propagation is unnecessary, e.g.

    foo(..., &err);
    if (err) {
        goto out;
    }
    ...
    bar(..., &err);
 out:
    error_propagate(errp, err);
    return;

move the error_propagate() to where it's needed, like

    if (...) {
        foo(..., &err);
        error_propagate(errp, err);
        return;
    }
    ...
    bar(..., errp);
    return;

and transform the error_setg() as above.

In some places, the transformation results in obviously unnecessary
error_propagate().  The next few commits will eliminate them.

Bonus: the elimination of gotos will make later patches in this series
easier to review.

Candidates for conversion tracked down with this Coccinelle script:

    @@
    identifier err, errp;
    expression list args;
    @@
    -    error_setg(&err, args);
    +    error_setg(errp, args);
         ... when != err
         error_propagate(errp, err);

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-34-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
5325cc34a2 qom: Put name parameter before value / visitor parameter
The object_property_set_FOO() setters take property name and value in
an unusual order:

    void object_property_set_FOO(Object *obj, FOO_TYPE value,
                                 const char *name, Error **errp)

Having to pass value before name feels grating.  Swap them.

Same for object_property_set(), object_property_get(), and
object_property_parse().

Convert callers with this Coccinelle script:

    @@
    identifier fun = {
        object_property_get, object_property_parse, object_property_set_str,
        object_property_set_link, object_property_set_bool,
        object_property_set_int, object_property_set_uint, object_property_set,
        object_property_set_qobject
    };
    expression obj, v, name, errp;
    @@
    -    fun(obj, v, name, errp)
    +    fun(obj, name, v, errp)

Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information".  Convert that one manually.

Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.

Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually.  The other files using RXCPU that way don't need
conversion.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
2020-07-10 15:18:08 +02:00
Markus Armbruster
9bc6bfdf67 qdev: Drop qbus_set_hotplug_handler() parameter @errp
qbus_set_hotplug_handler() is a simple wrapper around
object_property_set_link().

object_property_set_link() fails when the property doesn't exist, is
not settable, or its .check() method fails.  These are all programming
errors here, so passing &error_abort to qbus_set_hotplug_handler() is
appropriate.

Most of its callers do.  Exceptions:

* pcie_cap_slot_init(), shpc_init(), spapr_phb_realize() pass NULL,
  i.e. they ignore errors.

* spapr_machine_init() passes &error_fatal.

* s390_pcihost_realize(), virtio_serial_device_realize(),
  s390_pcihost_plug() pass the error to their callers.  The latter two
  keep going after the error, which looks wrong.

Drop the @errp parameter, and instead pass &error_abort to
object_property_set_link().

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-15-armbru@redhat.com>
2020-07-02 06:25:29 +02:00
Markus Armbruster
981c3dcd94 qdev: Convert to qdev_unrealize() with Coccinelle
For readability, and consistency with qbus_realize().

Coccinelle script:

    @ depends on !(file in "hw/core/qdev.c")@
    typedef DeviceState;
    DeviceState *dev;
    symbol false, error_abort;
    @@
    -    object_property_set_bool(OBJECT(dev), false, "realized", &error_abort);
    +    qdev_unrealize(dev);

    @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
    expression dev;
    symbol false, error_abort;
    @@
    -    object_property_set_bool(OBJECT(dev), false, "realized", &error_abort);
    +    qdev_unrealize(DEVICE(dev));

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-8-armbru@redhat.com>
2020-06-15 21:36:30 +02:00
Markus Armbruster
7ef1553dac spapr_pci: Drop some dead error handling
chassis_from_bus() uses object_property_get_uint() to get property
"chassis_nr" of the bridge device.  Failure would be a programming
error.  Pass &error_abort, and simplify its callers.

Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-18-armbru@redhat.com>
2020-05-15 07:08:14 +02:00
Markus Armbruster
b69c3c21a5 qdev: Unrealize must not fail
Devices may have component devices and buses.

Device realization may fail.  Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).

When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far.  If any of these unrealizes
failed, the device would be left in an inconsistent state.  Must not
happen.

device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.

Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back?  We'd have to
re-realize, which can fail.  This design is fundamentally broken.

device_set_realized() does not roll back at all.  Instead, it keeps
unrealizing, ignoring further errors.

It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.

bus_set_realized() does not roll back either.  Instead, it stops
unrealizing.

Fortunately, no unrealize method can fail, as we'll see below.

To fix the design error, drop parameter @errp from all the unrealize
methods.

Any unrealize method that uses @errp now needs an update.  This leads
us to unrealize() methods that can fail.  Merely passing it to another
unrealize method cannot cause failure, though.  Here are the ones that
do other things with @errp:

* virtio_serial_device_unrealize()

  Fails when qbus_set_hotplug_handler() fails, but still does all the
  other work.  On failure, the device would stay realized with its
  resources completely gone.  Oops.  Can't happen, because
  qbus_set_hotplug_handler() can't actually fail here.  Pass
  &error_abort to qbus_set_hotplug_handler() instead.

* hw/ppc/spapr_drc.c's unrealize()

  Fails when object_property_del() fails, but all the other work is
  already done.  On failure, the device would stay realized with its
  vmstate registration gone.  Oops.  Can't happen, because
  object_property_del() can't actually fail here.  Pass &error_abort
  to object_property_del() instead.

* spapr_phb_unrealize()

  Fails and bails out when remove_drcs() fails, but other work is
  already done.  On failure, the device would stay realized with some
  of its resources gone.  Oops.  remove_drcs() fails only when
  chassis_from_bus()'s object_property_get_uint() fails, and it can't
  here.  Pass &error_abort to remove_drcs() instead.

Therefore, no unrealize method can fail before this patch.

device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool().  Can't drop @errp there, so pass
&error_abort.

We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors.  Pass &error_abort instead.

Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.

One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().

Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-15 07:08:14 +02:00
David Gibson
05af7c77f5 spapr: Don't allow unplug of NVLink2 devices
Currently, we can't properly handle unplug of NVLink2 devices, because we
don't have code to tear down their special memory resources.  There's not
a lot of impetus to implement that: since hardware NVLink2 devices can't
be hot unplugged, the guest side drivers don't usually support unplug
anyway.

Therefore, simply prevent unplug of NVLink2 devices.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2020-05-07 11:10:50 +10:00
David Gibson
7aab589976 spapr: Fix failure path for attempting to hot unplug PCI bridges
For various technical reasons we can't currently allow unplug a PCI to PCI
bridge on the pseries machine.  spapr_pci_unplug_request() correctly
generates an error message if that's attempted.

But.. if the given errp is not error_abort or error_fatal, it doesn't
actually stop trying to unplug the bridge anyway.

Fixes: 14e714900f "spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges"
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
2020-04-07 08:55:11 +10:00
Damien Hedde
f703a04ce5 add device_legacy_reset function to prepare for reset api change
Provide a temporary device_legacy_reset function doing what
device_reset does to prepare for the transition with Resettable
API.

All occurrence of device_reset in the code tree are also replaced
by device_legacy_reset.

The new resettable API has different prototype and semantics
(resetting child buses as well as the specified device). Subsequent
commits will make the changeover for each call site individually; once
that is complete device_legacy_reset() will be removed.

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-2-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30 16:02:03 +00:00
Marc-André Lureau
4f67d30b5e qdev: set properties with device_class_set_props()
The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.

spatch --macro-file scripts/cocci-macro-file.h  --sp-file
./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place
--dir .

@@
typedef DeviceClass;
DeviceClass *d;
expression val;
@@
- d->props = val
+ device_class_set_props(d, val)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:15 +01:00
Markus Armbruster
8ca63ba8c2 error: Clean up unusual names of Error * variables
Local Error * variables are conventionally named @err or @local_err,
and Error ** parameters @errp.  Naming local variables like parameters
is confusing.  Clean that up.

Naming parameters like local variables is also confusing.  Left for
another day.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204093625.14836-17-armbru@redhat.com>
2019-12-18 08:36:15 +01:00
Wei Yang
038adc2f58 core: replace getpagesize() with qemu_real_host_page_size
There are three page size in qemu:

  real host page size
  host page size
  target page size

All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().

qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.

[Note] Not fully tested for some arch or device.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-26 15:38:06 +02:00
David Gibson
8cbe71ecb8 spapr: Remove SpaprIrq::nr_msis
The nr_msis value we use here has to line up with whether we're using
legacy or modern irq allocation.  Therefore it's safer to derive it based
on legacy_irq_allocation rather than having SpaprIrq contain a canned
value.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
2019-10-24 09:36:55 +11:00
David Gibson
258aa5ce1c spapr: Fold spapr_phb_lsi_qirq() into its single caller
No point having a two-line helper that's used exactly once, and not likely
to be used anywhere else in future.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-10-04 19:08:22 +10:00
Alexey Kardashevskiy
c4ec08ab70 spapr-pci: Stop providing assigned-addresses
QEMU does not allocate PCI resources (BARs) in any case - coldplug devices
are configured by the firmware and hotplug devices rely on the guest
system to do the assignment via the PCI rescan mechanism. Also in order
to create non empty "assigned-addresses", the device has to be enabled
(i.e. PCI_COMMAND needs the MMIO bit set) first as otherwise
io_regions[i].addr are -1, and devices are not enabled at this point.

This removes "assigned-addresses" and leaves it to those who actually
do resource allocation.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190927022651.71642-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-10-04 19:08:21 +10:00
Peter Maydell
f884294bd7 Machine + x86 queue, 2019-09-03
Bug fixes:
 * Fix die-id validation regression (Eduardo Habkost)
 * vmmouse: Properly reset state (Jan Kiszka)
 * hostmem-file: fix pmem file size check (Stefan Hajnoczi)
 * Keep query-hotpluggable-cpus output compatible with older QEMU
   if '-smp dies' is not set (Igor Mammedov)
 * migration: Do not re-read the clock on pre_save in case of paused guest
   (Maxiwell S. Garcia)
 
 Cleanups:
 * NUMA code cleanups (Tao Xu)
 * Remove stale externs from includes (Alex Bennée)
 
 Features:
 * qapi: report the default CPU type for each machine (Daniel P. Berrangé)
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAl1u08EUHGVoYWJrb3N0
 QHJlZGhhdC5jb20ACgkQKAeTb5hNxaaKGQ//WQY+JQgXj2M7i5bAuz1lkR0QKJvh
 n++70ugqNmmlj1YH7LKmZNll0tz+auo25PLgEBOamPZPFQXxkRhPBxTUnOdQJ1UC
 bSwyRzHrFluVITXD/nGkIXgmP4rjXil5QBWTxneWb7zYsXDGBEnauZnC1YsXzc9T
 5LISvc5zEz6pEzz5s3LdUJ947jTui/dDHVHupeyK/5bPkiPoKVoymsd4p8rvAmFw
 4obMftjuFzklm8oLPKpHYAm7VvXj5yb92/FE/ZKdaahcLPGStWixiHJ7xJlGMBti
 GqcWca+2sdbsraOz4Pg05x//vbOgiwIECqgKJRlJSAnG7Roz7E6J/xXQIYIkhpkL
 Sn0+s181WtFeNFlQgEP056iTUCq81oBjek2XzgsXzuQyFip5IJGLLQox4E+w0ty6
 7houoCkJD70ddl3sEj/koXi6rBeswNStfuxVYxUgwYa7HecehNvVD5q9NlElRhev
 Lce4szuWJzHBbhW5ubGmN6rCbXNa+mPrBunrDwbjApl12DFkr163dj9DsyN/DUgy
 MmfsgqpKZ+g18VSajck2QtvTg+9Oqv0bv3SWtpDwzDxS9VULz0r2wfcN9TZDipV0
 qCZWg39BpCIgdd4s5L0q6bamC9+eSwoByFx54WrkoQT81odHJqUHNsCE9wnoNvmG
 aZlV3idjGmsTFiE=
 =u5HZ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine + x86 queue, 2019-09-03

Bug fixes:
* Fix die-id validation regression (Eduardo Habkost)
* vmmouse: Properly reset state (Jan Kiszka)
* hostmem-file: fix pmem file size check (Stefan Hajnoczi)
* Keep query-hotpluggable-cpus output compatible with older QEMU
  if '-smp dies' is not set (Igor Mammedov)
* migration: Do not re-read the clock on pre_save in case of paused guest
  (Maxiwell S. Garcia)

Cleanups:
* NUMA code cleanups (Tao Xu)
* Remove stale externs from includes (Alex Bennée)

Features:
* qapi: report the default CPU type for each machine (Daniel P. Berrangé)

# gpg: Signature made Tue 03 Sep 2019 21:57:37 BST
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
  migration: Do not re-read the clock on pre_save in case of paused guest
  x86: do not advertise die-id in query-hotpluggbale-cpus if '-smp dies' is not set
  i386/vmmouse: Properly reset state
  hostmem-file: fix pmem file size check
  qapi: report the default CPU type for each machine
  pc: Don't make die-id mandatory unless necessary
  pc: Improve error message when die-id is omitted
  pc: Fix error message on die-id validation
  numa: move numa global variable numa_info into MachineState
  numa: move numa global variable have_numa_distance into MachineState
  numa: move numa global variable nb_numa_nodes into MachineState
  hw/arm: simplify arm_load_dtb
  includes: remove stale [smp|max]_cpus externs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-04 14:44:54 +01:00
Tao Xu
7e721e7b10 numa: move numa global variable numa_info into MachineState
Move existing numa global numa_info (renamed as "nodes") into NumaState.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-5-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03 11:26:55 -03:00
Greg Kurz
572ebd08b3 spapr/pci: Convert types to QEMU coding style
The QEMU coding style requires:
- to typedef structured types (HACKING)
- to use CamelCase for types and structure names (CODING_STYLE)

Do that for PCI and Nvlink2 code.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156701644465.505236.2850655823182656869.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-29 09:46:07 +10:00
Daniel Henrique Barboza
02a1536eee spapr_pci: remove all child functions in function zero unplug
There is nothing wrong with how sPAPR handles multifunction PCI
hot unplugs. The problem is that x86 does it simpler. Instead of
removing each non-zero function and then removing function zero,
x86 can remove any function of the slot to trigger the hot unplug.

Libvirt will be directly impacted by this difference, in the
(hopefully soon) PCI Multifunction hot plug/unplug support. For
hot plugs, both x86 and sPAPR will operate the same way: a XML
with all desired functions to be added, then consecutive hotplugs
of all non-zero functions first, zero last. For hot unplugs, at
least in the current state, a XML with the devices to be removed
must also be provided because of how sPAPR operates - x86 does
not need it - since any function unplug will unplug the whole
PCIe slot. This difference puts extra strain in the management
layer, which needs to either handle both archs differently in
the unplug scenario or choose treat x86 like sPAPR, forcing x86
users to cope with sPAPR internals.

This patch changes spapr_pci_unplug_request to handle the
unplug of function zero differently. When removing function zero,
instead of error-ing out if there are any remaining function
DRCs which needs detaching, detach those. This has no effect in
any existing scripts that are detaching the non-zero functions
before function zero, and can be used by management as a shortcut
to remove the whole PCI multifunction device without specifying
each child function.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20190822195918.3307-1-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-29 09:46:07 +10:00