Since &I2C_SLAVE(dev)->qdev == dev, no need to go back and
forth with QOM type casting. Directly use 'dev'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test currently fails when run on a host for which the QEMU target
has no default machine set:
ERROR| Output: qemu-system-aarch64: No machine specified, and there is
no default
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This struct has no dependencies on TCG code and it is being used in
target/arm/ptw.c to simplify the passing around of page table walk
results. Those routines can be reached by KVM code via the gdbstub
breakpoint code, so take the structure out of CONFIG_TCG to make it
visible when building with --disable-tcg.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When TCG is disabled this part of the code should not be reachable, so
wrap it with an ifdef for now.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is needed by common code (ptw.c), so move it along with
the other regime_* functions in internal.h. When we enable the build
without TCG, the tlb_helper.c file will not be present.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The hflags are used only for TCG code, so introduce a new file
hflags.c to keep that code.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is in preparation to moving the hflags code into its own file
under the tcg/ directory.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the target/arm/tcg directory. Its purpose is to hold the TCG
code that is selected by CONFIG_TCG.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The next few patches will move helpers under CONFIG_TCG. We'd prefer
to keep the debug helpers and debug registers close together, so
rearrange the file a bit to be able to wrap the helpers with a TCG
ifdef.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is in preparation for restricting compilation of some parts of
debug_helper.c to TCG only.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pci_device.h is not needed at all in allwinner-a10.h, and serial.h
is only needed by the corresponding .c file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230215152233.210024-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix memory corruption in the s390x dump code
* Various s390x TCG clean-ups
* s390x PV support for asynchronous teardown for reboot
* qemu-keymap related fixes
* Improvements for the duration of the gitlab-CI
* Deprecate the "-no-acpi" command line switch
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmP8lVURHHRodXRoQHJl
ZGhhdC5jb20ACgkQLtnXdP5wLbWYkg//RTKsG0+HGMtnKvjTA5NzLIJrWAQfSPfh
ABkxNHoscReae8LGquFfeTy9cN/uA051e/P06WfPXAkg3Uj72JKHHs/ncm5VhApY
7moOCIHlvFRAsy5TKYoInM+Yo0jov7vgKqqJcS3AL3hwhmvEwPwKr0cpZLNfKV8p
GD+XM453g0AFn2jDFoXDsnHX3zco+7sd4dQN4olSrkd/gDel2UQ5JE4gJ/o6Qgys
GW4vb+NpxQ6W3mSlU+ClTr03ZljPkascBS7tZO8Fwn+J3Wv4UTNLlM1JFXQhC3v8
x9HpVpk4HW6C/hiPcsMpZRlXBb/HklkAhDxZ6tjTnQLRvbJ/o2uISJt+ZgeH9zeQ
Ae4Ap7yPxsuGbx2twzbGoyEPAJj18hW7EUd6KromFqy877svmyRYs3NXQqSJOEmh
Pv7VriUe6esyyVSXWjA6g2imo5pIhWxxRlsNVrrp8vOJNYT+ygBIFqu28ngwk86H
jZOLqekEkQrNkwZZLuoxm8FyCAvzfMBeHQFlDnL4a3114dlC6X3/cJqCZ5htTaO+
t7CL6QcepRh0NQPw1jRlUCARZK+WocjwwcmzgVzSKKzGpdg/EJC8Sg54l7wdVQCp
jY3HEUWHHHmrqe3IefrzadRQhsB9xKcNdUaZmetRUm+ohgSc9S0cfpVXNwT+G3+M
a47dp9ueI6Q=
=wDFZ
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-02-27' of https://gitlab.com/thuth/qemu into staging
* Simplify device casting in w/vfio/ccw.c
* Fix memory corruption in the s390x dump code
* Various s390x TCG clean-ups
* s390x PV support for asynchronous teardown for reboot
* qemu-keymap related fixes
* Improvements for the duration of the gitlab-CI
* Deprecate the "-no-acpi" command line switch
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmP8lVURHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWYkg//RTKsG0+HGMtnKvjTA5NzLIJrWAQfSPfh
# ABkxNHoscReae8LGquFfeTy9cN/uA051e/P06WfPXAkg3Uj72JKHHs/ncm5VhApY
# 7moOCIHlvFRAsy5TKYoInM+Yo0jov7vgKqqJcS3AL3hwhmvEwPwKr0cpZLNfKV8p
# GD+XM453g0AFn2jDFoXDsnHX3zco+7sd4dQN4olSrkd/gDel2UQ5JE4gJ/o6Qgys
# GW4vb+NpxQ6W3mSlU+ClTr03ZljPkascBS7tZO8Fwn+J3Wv4UTNLlM1JFXQhC3v8
# x9HpVpk4HW6C/hiPcsMpZRlXBb/HklkAhDxZ6tjTnQLRvbJ/o2uISJt+ZgeH9zeQ
# Ae4Ap7yPxsuGbx2twzbGoyEPAJj18hW7EUd6KromFqy877svmyRYs3NXQqSJOEmh
# Pv7VriUe6esyyVSXWjA6g2imo5pIhWxxRlsNVrrp8vOJNYT+ygBIFqu28ngwk86H
# jZOLqekEkQrNkwZZLuoxm8FyCAvzfMBeHQFlDnL4a3114dlC6X3/cJqCZ5htTaO+
# t7CL6QcepRh0NQPw1jRlUCARZK+WocjwwcmzgVzSKKzGpdg/EJC8Sg54l7wdVQCp
# jY3HEUWHHHmrqe3IefrzadRQhsB9xKcNdUaZmetRUm+ohgSc9S0cfpVXNwT+G3+M
# a47dp9ueI6Q=
# =wDFZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 Feb 2023 11:34:45 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-02-27' of https://gitlab.com/thuth/qemu: (33 commits)
Deprecate the "-no-acpi" command line switch
gitlab-ci.d/base: Mark jobs as interruptible by default
gitlab-ci.d: Build with --enable-fdt=system by default
gitlab-ci.d/buildtest-template: Simplify the configure step
gitlab-ci.d/buildtest: Disintegrate the build-coroutine-sigaltstack job
gitlab-ci.d/buildtest: Remove aarch64-softmmu from the build-system-ubuntu job
Updated the FSF address to <https://www.gnu.org/licenses/>
meson: fix dependency on qemu-keymap
qemu-keymap: Silence memory leak warning from Clang's sanitizer
configure: Add 'mkdir build' check
tests/tcg/s390x: Add sam.S
tests/tcg/s390x: Add bal.S
target/s390x: Use tcg_constant_* in translate_vx.c.inc
target/s390x: Use tcg_constant_i32 for fpinst_extract_m34
target/s390x: Use tcg_constant_* for DisasCompare
target/s390x: Use tcg_constant_* in local contexts
s390x/pv: Add support for asynchronous teardown for reboot
target/s390x: Hoist some computation in access_memmove
target/s390x: Inline do_access_{get,set}_byte
target/s390x: Remove TLB_NOTDIRTY workarounds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Python 3.6 is at end-of-life. Update the libvirt-ci module to a
version that supports overrides for targets and package mappings;
this way, QEMU can use the newer versions provided by CentOS 8 (Python
3.8) and OpenSUSE 15.3 (Python 3.9).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shorten a bit the description of what libvirt-ci does, the name of the
data files is not relevant at that point. However, the procedures to add
new build prerequisites are lacking some information, particularly with
respect to regenerating the output test files for lcitool's unit tests.
While at it, also update the paths in the libvirt-ci repository.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the moment, we look for just "python3" and "python", which is good
enough almost all of the time. But ... if you are on a platform that
uses an older Python by default and only offers a newer Python as an
option, you'll have to specify --python=/usr/bin/foo every time.
We can be kind and instead make a cursory attempt to locate a suitable
Python binary ourselves, looking for the remaining well-known binaries.
This configure loop will prefer, in order:
1. Whatever is specified in $PYTHON
2. python3
3. python
4. python3.11 down through python3.6
Notes:
- Python virtual environment provides binaries for "python3", "python",
and whichever version you used to create the venv,
e.g. "python3.8". If configure is invoked from inside of a venv, this
configure loop will not "break out" of that venv unless that venv is
created using an explicitly non-suitable version of Python that we
cannot use.
- In the event that no suitable python is found, the first python found
is the version used to generate the human-readable error message.
- The error message isn't printed right away to allow later
configuration code to pick up an explicitly configured python.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If neither --python nor --meson are specified, Meson's generated
build.ninja will invoke Python script using the interpreter *that Meson
itself is running under*; not the one identified by configure.
This is only an issue if Meson's Python interpreter is not "the first
one in the path", which is the one that is used if --python is not
specified. A common case where this happen is when the "python3" binary
comes from a virtual environment but Meson is not installed (with pip)
in the virtual environment. In this case (presumably) whoever set up
the venv wanted to use the venv's Python interpreter to build QEMU,
while Meson might use a different one, for example an enterprise
distro's older runtime.
So, detect whether a virtual environment is setup, and if the virtual
environment does not have Meson, use the meson submodule. Meson will
then run under the virtual environment's Python interpreter.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Once upon a time, "sphinx-build" on certain RPM platforms invoked
specifically a Python 2.x version, while "sphinx-build-3" was a distro
shim for the Python 3.x version.
These days, none of our supported platforms utilize a 2.x version, and
those that still have 'sphinx-build-3' make it a symbolic link to
'sphinx-build'. Not searching for 'sphinx-build-3' will prefer
pip/venv installed versions of sphinx if they're available.
This adds an extremely convenient ability to test document building
ability in QEMU across multiple versions of Sphinx for the purposes of
compatibility testing.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230221012456.2607692-6-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to "-no-hpet", the "-no-acpi" switch is a legacy command
line option that should be replaced with the "acpi" machine parameter
nowadays.
Message-Id: <20230224090543.1129677-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When handling pull requests in the staging branch, it often happens
that one of the job fails due to a problem, so that the pull request
can't be merged. Peter/Richard/Stefan then informs the sender of the
pull request and continues by pushing the next pending pull request
from another subsystem maintainer. Now the problem is that there might
still be lots of other running jobs in the pipeline of the first pull
request, eating up precious CI minutes though the pipeline is not
needed anymore. We can avoid this by marking the jobs as "interruptible".
With this setting, the jobs from previous pipelines are automatically
terminated when pushing a new one. If someone does not like this auto-
matic termination, it can still be disabled in the settings of the
repository. See this URL for details:
https://docs.gitlab.com/ee/ci/yaml/index.html#interruptible
Message-Id: <20230223191343.1064274-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit eed56e9a89 "configure, meson: move config-poison.h to meson"
lost a "| sort -u". Restore it. config-poison shrinks from ~4500 to
~700 lines when all targets are enabled.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230206102037.3621709-1-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We did not correctly handle N >= operand size.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1374
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114233206.3118472-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By using --enable-fdt=system we can make sure that the configure
script does not try to check out the "dtc" submodule. This should
help to safe some precious CI minutes in the long run.
While we're at it, also drop some now-redundant --enable-slirp
and --enable-capstone statements. These used to have the "=system"
suffix in the past, too, which has been dropped when the their
corresponding submodules had been removed. Since these features
are auto-enabled anyway now (since the containers have the right
libraries installed), we do not need the explicit --enable-...
statements anymore.
Message-Id: <20230207201447.566661-6-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's easier to use ${TARGETS:+--target-list="$TARGETS"} to add
a --target-list parameter depending on whether the TARGETS variable
is set or not.
Message-Id: <20230207201447.566661-5-thuth@redhat.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We can get rid of the build-coroutine-sigaltstack job by moving
the configure flags that should be tested here to other jobs:
Move --with-coroutine=sigaltstack to the build-system-debian job
(where the coroutines should get some more test coverage with
"make check-block", too) and --enable-trace-backends=ftrace to
the cross-s390x-kvm-only job.
Message-Id: <20230207201447.566661-4-thuth@redhat.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
aarch64-softmmu is also checked on the same version of Ubuntu in the
gcov job, so it is redundant to check again in the normal ubuntu job.
Message-Id: <20230207201447.566661-3-thuth@redhat.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Free Software Foundation moved to a new address and some
sources in QEMU referred to their old location.
The address should be updated and replaced by a pointer to
<https://www.gnu.org/licenses/>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/379
Signed-off-by: Khadija Kamran <kkamran.bese16seecs@seecs.edu.pk>
Message-Id: <576ee9203fdac99d7251a98faa66b9ce1e7febc5.1675941486.git.kkamran.bese16seecs@seecs.edu.pk>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When qemu-keymap is not available on the host, and enable-xkbcommon
is specified, parallel make fails with:
% make clean
...
% make -j 32
...
FAILED: pc-bios/keymaps/is
./qemu-keymap -f pc-bios/keymaps/is -l is
/bin/sh: ./qemu-keymap: No such file or directory
... many similar messages ...
The code always runs find_program, rather than waiting to build
qemu-keymap, because it looks for CONFIG_XKBCOMMON in config_host
rather than config_host_data. Making serially succeeds, by soft
linking files from pc-bios/keymaps, but that is not the desired
result for enable-xkbcommon.
Examining all occurrences of 'in config_host' for similar bugs shows one
instance in the docs, which is also fixed here.
Fixes: 4113f4cfee ("meson: move xkbcommon to meson")
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1675708442-74966-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling QEMU with "--enable-sanitizers --enable-xkbcommon --cc=clang"
there is a memory leak warning when running qemu-keymap:
$ ./qemu-keymap -f pc-bios/keymaps/de -l de
=================================================================
==610321==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 136 byte(s) in 1 object(s) allocated from:
#0 0x5642830d0820 in __interceptor_calloc.part.11 asan_malloc_linux.cpp.o
#1 0x7f31873b8d2b in xkb_state_new (/lib64/libxkbcommon.so.0+0x1dd2b) (BuildId: dd32581e2248833243f3f646324ae9b98469f025)
SUMMARY: AddressSanitizer: 136 byte(s) leaked in 1 allocation(s).
It can be silenced by properly releasing the "state" again
after it has been used.
Message-Id: <20230221122440.612281-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QEMU configure script goes into an infinite error printing loop
when in read only directory due to 'build' dir never being created.
Checking if 'mkdir dir' succeeds prevents this error.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/321
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dinah Baum <dinahbaum123@gmail.com>
Message-Id: <20230221110631.4142-1-dinahbaum123@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[thuth: Remove second "touch $MARKER"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221129015328.55439-1-iii@linux.ibm.com>
Message-Id: <20230220184052.163465-7-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221103130011.2670186-1-iii@linux.ibm.com>
Message-Id: <20230220184052.163465-6-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In most cases, this is a simple local allocate and free
replaced by tcg_constant_*. In three cases, a variable
temp was initialized with a constant value -- reorg to
localize the constant. In gen_acc, this fixes a leak.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230220184052.163465-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Return a constant or NULL, which means the free may be
removed from all callers of fpinst_extract_m34.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230220184052.163465-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The a and b fields are not modified by the consumer,
and while we need not free a constant, tcg will quietly
ignore such frees, so free_compare need not be changed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230220184052.163465-3-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace tcg_const_* with tcg_constant_* in contexts
where the free to remove is nearby.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20230220184052.163465-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds support for the asynchronous teardown for reboot for
protected VMs.
When attempting to tear down a protected VM, try to use the new
asynchronous interface first. If that fails, fall back to the classic
synchronous one.
The asynchronous interface involves invoking the new
KVM_PV_ASYNC_DISABLE_PREPARE command for the KVM_S390_PV_COMMAND ioctl.
This will prepare the current protected VM for asynchronous teardown.
Once the protected VM is prepared for teardown, execution can continue
immediately.
Once the protected VM has been prepared, a new thread is started to
actually perform the teardown. The new thread uses the new
KVM_PV_ASYNC_DISABLE command for the KVM_S390_PV_COMMAND ioctl. The
previously prepared protected VM is torn down in the new thread.
Once KVM_PV_ASYNC_DISABLE is invoked, it is possible to use
KVM_PV_ASYNC_DISABLE_PREPARE again. If a protected VM has already been
prepared and its cleanup has not started, it will not be possible to
prepare a new VM. In that case the classic synchronous teardown has to
be performed.
The synchronous teardown will now also clean up any prepared VMs whose
asynchronous teardown has not been initiated yet.
This considerably speeds up the reboot of a protected VM; for large VMs
especially, it could take a long time to perform a reboot with the
traditional synchronous teardown, while with this patch it is almost
immediate.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230214163035.44104-3-imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ensure that the total length is in a local variable
across the byte loop. Compute size1 difference once.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-8-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Inline into the parent functions with a simple test
to select the page, and a new define to remove ifdefs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-7-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When this code was written, it was using tlb_vaddr_to_host,
which does not handle TLB_DIRTY. Since then, it has been
converted to probe_access_flags, which does.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-6-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Assign to access struct immediately, rather than waiting
until the end of the function. This means we can pass
address of haddr struct members instead of allocating
extra space on the local stack.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The interface from probe_access_flags is void*, and matching
that will be helpful. We already rely on the gcc extension
for byte arithmetic on void*.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Passing a pointer from the caller down to access_prepare_nf
eliminates a structure copy.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-3-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In db9aab5783 we broke the contract of s390_probe_access, in that it
no longer returned an exception code, nor set __excp_addr. Fix both.
Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are not on a hot path here, so there is no real need for the logic
here with the split heap and stack space allocation. Simplify it by
always allocating memory from the heap.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215085703.746788-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"note_size" can be smaller than sizeof(note), so unconditionally calling
memset(notep, 0, sizeof(note)) could cause a memory corruption here in
case notep has been allocated dynamically, thus let's use note_size as
length argument for memset() instead.
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Fixes: 113d8f4e95 ("s390x: pv: Add dump support")
Message-Id: <20230214141056.680969-1-thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the VFIO_CCW() QOM type-checking macro to avoid DO_UPCAST().
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213170145.45666-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
