Commit Graph

32 Commits

Author SHA1 Message Date
Eddie James
2bea128c3d hw/sd/aspeed_sdhci: New device
The Aspeed SOCs have two SD/MMC controllers. Add a device that
encapsulates both of these controllers and models the Aspeed-specific
registers and behavior.

Tested by reading from mmcblk0 in Linux:
qemu-system-arm -machine romulus-bmc -nographic \
 -drive file=flash-romulus,format=raw,if=mtd \
 -device sd-card,drive=sd0 -drive file=_tmp/kernel,format=raw,if=sd,id=sd0

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190925143248.10000-3-clg@kaod.org
[clg: - changed the controller MMIO window size to 0x1000
      - moved the MMIO mapping of the SDHCI slots at the SoC level
      - merged code to add SD drives on the SD buses at the machine level ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15 18:09:04 +01:00
Markus Armbruster
a27bd6c779 Include hw/qdev-properties.h less
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h.  Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Philippe Mathieu-Daudé
2c51137538 sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180607180641.874-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:34 +01:00
Philippe Mathieu-Daudé
2f0939c234 sdcard: Add a 'spec_version' property, default to Spec v2.00
As of this commit, the Spec v1 is not working, and all controllers
expect the cards to be conformant to Spec v2.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180607180641.874-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:33 +01:00
Philippe Mathieu-Daudé
6f296421f8 sdcard: use the registerfields API to access the OCR register
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215220540.6556-12-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:52 +00:00
Philippe Mathieu-Daudé
da34692234 sdhci: implement CMD/DAT[] fields in the Present State register
[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
 from qemu/xilinx tag xilinx-v2015.2]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180208164818.7961-23-f4bug@amsat.org>
2018-02-13 16:15:08 +01:00
Philippe Mathieu-Daudé
0034ebe6ee sdhci: implement UHS-I voltage switch
[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
 from qemu/xilinx tag xilinx-v2015.2]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180208164818.7961-22-f4bug@amsat.org>
2018-02-13 16:15:08 +01:00
Philippe Mathieu-Daudé
ea55a221bf sdhci: implement the Host Control 2 register (tuning sequence)
[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
 from qemu/xilinx tag xilinx-v2015.2]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180208164818.7961-20-f4bug@amsat.org>
2018-02-13 16:15:08 +01:00
Philippe Mathieu-Daudé
06c5120b09 sdhci: rename the hostctl1 register
As per the Spec v3.00

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180208164818.7961-19-f4bug@amsat.org>
2018-02-13 16:15:08 +01:00
Philippe Mathieu-Daudé
aceb5b064c sdhci: add a 'spec_version property' (default to v2)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180208164818.7961-8-f4bug@amsat.org>
2018-02-13 16:15:07 +01:00
Andrey Smirnov
fd1e5c8179 sdhci: Add i.MX specific subtype of SDHCI
IP block found on several generations of i.MX family does not use
vanilla SDHCI implementation and it comes with a number of quirks.

Introduce i.MX SDHCI subtype of SDHCI block to add code necessary to
support unmodified Linux guest driver.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMM: define and use ESDHC_UNDOCUMENTED_REG27]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09 10:40:29 +00:00
Philippe Mathieu-Daudé
02e57e1c14 sdhci: fix a NULL pointer dereference due to uninitialized AddresSpace object
missed in 60765b6cee.

  Thread 1 "qemu-system-aarch64" received signal SIGSEGV, Segmentation fault.
  address_space_init (as=0x0, root=0x55555726e410, name=name@entry=0x555555e3f0a7 "sdhci-dma") at memory.c:3050
  3050	    as->root = root;
  (gdb) bt
  #0  address_space_init (as=0x0, root=0x55555726e410, name=name@entry=0x555555e3f0a7 "sdhci-dma") at memory.c:3050
  #1  0x0000555555af62c3 in sdhci_sysbus_realize (dev=<optimized out>, errp=0x7fff7f931150) at hw/sd/sdhci.c:1564
  #2  0x00005555558b25e5 in zynqmp_sdhci_realize (dev=0x555557051520, errp=0x7fff7f931150) at hw/sd/zynqmp-sdhci.c:151
  #3  0x0000555555a2e7f3 in device_set_realized (obj=0x555557051520, value=<optimized out>, errp=0x7fff7f931270) at hw/core/qdev.c:966
  #4  0x0000555555ba3f74 in property_set_bool (obj=0x555557051520, v=<optimized out>, name=<optimized out>, opaque=0x555556e04a20,
      errp=0x7fff7f931270) at qom/object.c:1906
  #5  0x0000555555ba51f4 in object_property_set (obj=obj@entry=0x555557051520, v=v@entry=0x5555576dbd60,
      name=name@entry=0x555555dd6306 "realized", errp=errp@entry=0x7fff7f931270) at qom/object.c:1102

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180123132051.24448-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:30 +00:00
Philippe Mathieu-Daudé
60765b6cee sdhci: add a 'dma' property to the sysbus devices
Add a 'dma' property allowing machine creation to provide the address-space
SDHCI DMA operates on.

[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
 from qemu/xilinx tag xilinx-v2016.1]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180115182436.2066-15-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16 13:28:21 +00:00
Philippe Mathieu-Daudé
dd55c485ec sdhci: fix the PCI device, using the PCI address space for DMA
While SysBus devices can use the get_system_memory() address space,
PCI devices should use the bus master address space for DMA.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180115182436.2066-14-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16 13:28:21 +00:00
Philippe Mathieu-Daudé
5efc9016e5 sdhci: fix CAPAB/MAXCURR registers, both are 64bit and read-only
running qtests:

  $ make check-qtest-arm
    GTESTER check-qtest-arm
  SDHC rd_4b @0x44 not implemented
  SDHC wr_4b @0x40 <- 0x89abcdef not implemented
  SDHC wr_4b @0x44 <- 0x01234567 not implemented

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-12-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16 13:28:20 +00:00
Philippe Mathieu-Daudé
b635d98cf3 sdhci: use DEFINE_SDHCI_COMMON_PROPERTIES() for common sysbus/pci properties
Add common/sysbus/pci/sdbus comments to have clearer code blocks separation.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180115182436.2066-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16 13:28:16 +00:00
Philippe Mathieu-Daudé
03603958a4 sdhci: remove dead code
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16 13:28:15 +00:00
Philippe Mathieu-Daudé
f82a0f449b sdhci: clean up includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16 13:28:15 +00:00
Clement Deschamps
97fb87cc5d hw/sd: add card-reparenting function
Provide a new function sdbus_reparent_card() in sd core for reparenting
a card from a SDBus to another one.

This function is required by the raspi platform, where the two SD
controllers can be dynamically switched.

Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1488293711-14195-3-git-send-email-peter.maydell@linaro.org
Message-id: 20170224164021.9066-3-clement.deschamps@antfield.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added a doc comment to the header file; changed to
 use new behaviour of qdev_set_parent_bus()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28 17:10:00 +00:00
Clement Deschamps
43ddc182e2 bcm2835_sdhost: add bcm2835 sdhost controller
This adds the BCM2835 SDHost controller from Arasan.

Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr>
Message-id: 20170224164021.9066-2-clement.deschamps@antfield.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28 12:08:19 +00:00
Markus Armbruster
2a6a4076e1 Clean up ill-advised or unusual header guards
Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:20:46 +02:00
Paolo Bonzini
33c11879fd qemu-common: push cpu.h inclusion out of qemu-common.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:29 +02:00
Andrew Baumann
0a7ac9f9e7 sdhci: add quirk property for card insert interrupt status on Raspberry Pi
This quirk is a workaround for the following hardware behaviour, on
which UEFI (specifically, the bootloader for Windows on Pi2) depends:

1. at boot with an SD card present, the interrupt status/enable
   registers are initially zero
2. upon enabling it in the interrupt enable register, the card insert
   bit in the interrupt status register is immediately set
3. after a subsequent controller reset, the card insert interrupt does
   not fire, even if enabled in the interrupt enable register

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1456436130-7048-3-git-send-email-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26 15:09:42 +00:00
Andrew Baumann
5c1bc9a234 sdhci: Revert "add optional quirk property to disable card insertion/removal interrupts"
This reverts commit 723697551a.

This change was poorly tested on my part. It squelched card insertion
interrupts on reset, but that was not necessary because sdhci_reset()
clears all the registers (via the call to memset), so the subsequent
sdhci_insert_eject_cb() call never sees the card insert interrupt
enabled. However, not calling the insert_eject_cb results in prnsts
remaining 0, when it actually needs to be updated to indicate card
presence and R/O status.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1456436130-7048-2-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26 15:09:42 +00:00
Peter Maydell
40bbc19437 hw/sd/sdhci.c: Update to use SDBus APIs
Update the SDHCI code to use the new SDBus APIs.

This commit introduces the new command line options required
to connect a disk to sdhci-pci:

 -device sdhci-pci -drive id=mydrive,[...] -device sd,drive=mydrive

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1455646193-13238-6-git-send-email-peter.maydell@linaro.org
2016-02-18 14:26:33 +00:00
Peter Maydell
c759a790b6 hw/sd: Add QOM bus which SD cards plug in to
Add a QOM bus for SD cards to plug in to.

Note that since sd_enable() is used only by one board and there
only as part of a broken implementation, we do not provide it in
the SDBus API (but instead add a warning comment about the old
function). Whoever converts OMAP and the nseries boards to QOM
will need to either implement the card switch properly or move
the enable hack into the OMAP MMC controller model.

In the SDBus API, the old-style use of sd_set_cb to register some
qemu_irqs for notification of card insertion and write-protect
toggling is replaced with methods in the SDBusClass which the
card calls on status changes and methods in the SDClass which
the controller can call to find out the current status. The
query methods will allow us to remove the abuse of the 'register
irqs' API by controllers in their reset methods to trigger
the card to tell them about the current status again.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1455646193-13238-5-git-send-email-peter.maydell@linaro.org
2016-02-18 14:26:33 +00:00
Peter Maydell
260bc9d8aa hw/sd/sd.c: QOMify
Turn the SD card into a QOM device.
This conversion only changes the device itself; the various
functions which are effectively methods on the device are not
touched at this point.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1455646193-13238-3-git-send-email-peter.maydell@linaro.org
2016-02-18 14:26:33 +00:00
Andrew Baumann
723697551a sdhci: add optional quirk property to disable card insertion/removal interrupts
This is needed for a quirk of the Raspberry Pi (bcm2835/6) MMC
controller, where the card insert bit is documented as unimplemented
(always reads zero, doesn't generate interrupts) but is in fact
observed on hardware as set at power on, but is cleared (and remains
clear) on subsequent controller resets.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1450738069-18664-4-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22 16:34:26 +08:00
Markus Armbruster
79f2170789 sdhci: Sanitize "sdhci-pci" properties for future qomification
We currently fuse controller and card into a single device model, but
we intend qomify things properly and separate the two.  The properties
that really belong to the card would then have to somehow pass-through
to the card's properties.  To avoid that complication, either mark
them experimental or drop them.

Properties "capareg", "maxcurr" and the usual PCI device properties
belong to the controller.  Property "drive" belongs to the card;
rename it to "x-drive".  Properties "logical_block_size",
"physical_block_size", "min_io_size", "opt_io_size",
"discard_granularity" belong to the card, but have no effect; drop
them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449503710-3707-2-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-07 17:13:10 +00:00
Sai Pavan Boddu
637d23beb6 sdhci: Split sdhci.h for public and internal device usage
Split sdhci.h into pubilc version (i.e include/hw/sd/sdhci.h) and
internal version (i.e hw/sd/sdhci-interna.h) based on register
declarations and object declaration.

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-29 17:59:27 +00:00
Sai Pavan Boddu
e3382ef0ea sd.h: Move sd.h to include/hw/sd/
Create a sd directory under include/hw/ and move sd.h to
include/hw/sd/

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-29 17:59:27 +00:00