Not used anymore after moving block migration to use capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We have change in the previous patch to use migration capabilities for
it. Notice that we continue using the old command line flags from
migrate command from the time being. Remove the set_params method as
now it is empty.
For savevm, one can't do a:
savevm -b/-i foo
but now one can do:
migrate_set_capability block on
savevm foo
And we can't use block migration. We could disable block capability
unconditionally, but it would not be much better.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
- Maintain shared/enabled dependency (Xu suggestion)
- Now we maintain the dependency on the setter functions
- improve error messages
We can call this qmp command to do checkpoint outside of qemu.
Xen colo will need this function.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
We can call this qmp command to start/stop replication outside of qemu.
Like Xen colo need this function.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
We should not do failover work while the main thread is loading
VM's state. Otherwise the consistent of VM's memory and
device state will be broken.
We will restart the loading process after jump over the stage,
The new failover status 'RELAUNCH' will help to record if we
need to restart the process.
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1484657864-21708-4-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Added a missing '(Since 2.9)'
If the net connection between primary host and secondary host breaks
while COLO/COLO incoming threads are doing read() or write().
It will block until connection is timeout, and the failover process
will be blocked because of it.
So it is necessary to shutdown all the socket fds used by COLO
to avoid this situation. Besides, we should close the corresponding
file descriptors after failvoer BH shutdown them,
Or there will be an error.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1484657864-21708-3-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If we set checkpoint-delay through command 'migrate-set-parameters',
It will not take effect until we finish last sleep chekpoint-delay,
That's will be offensive espeically when we want to change its value
from an extreme big one to a proper value.
Fix it by using timer to realize checkpoint-delay.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1484657864-21708-2-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Some older GCC versions (e.g. 4.4.7) report a warning on an
uninitialized variable for 'request', even though all possible code
paths that reference 'request' will be initialized. To appease
these versions, initialize the variable to 0.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-id: 259818682e41b95ae60f1423b87954a3fe377639.1477950393.git.jcody@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
configure --enable-colo/--disable-colo to switch COLO
support on/off.
COLO feature doesn't depend on any other external libraries,
So here it is reasonable to enable COLO by default, to
avoid re-compile QEMU if users want to use this capability.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
If users require SVM to takeover work, COLO incoming thread should
exit from loop while failover BH helps backing to migration incoming
coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
For primary side, if COLO gets failover request from users.
To be exact, gets 'x_colo_lost_heartbeat' command.
COLO thread will exit the loop while the failover BH does the
cleanup work and resumes VM.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
When handling failover, COLO processes differently according to
the different stage of failover process, here we introduce a global
atomic variable to record the status of failover.
We add four failover status to indicate the different stage of failover process.
You should use the helpers to get and set the value.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We leave users to choose whatever heartbeat solution they want,
if the heartbeat is lost, or other errors they detect, they can use
experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover,
COLO will do operations accordingly.
For example, if the command is sent to the Primary side,
the Primary side will exit COLO mode, does cleanup work,
and then, PVM will take over the service work. If sent to the Secondary side,
the Secondary side will run failover work, then takes over PVM's service work.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Do checkpoint periodically, the default interval is 200ms.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We should not destroy the state of SVM (Secondary VM) until we receive
the complete data of PVM's state, in case the primary fails in the process
of sending the state, so we cache the VM's state in secondary side before
load it into SVM.
Besides, we should call qemu_system_reset() before load VM state,
which can ensure the data is intact.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
VM checkpointing is to synchronize the state of PVM to SVM, just
like migration does, we re-use save helpers to achieve migrating
PVM's state to Secondary side.
COLO need to cache the data of VM's state in the secondary side before
synchronize it to SVM. COLO need the size of the data to determine
how much data should be read in the secondary side.
So here, we can get the size of the data by saving it into I/O channel
before send it to the secondary side.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We need communications protocol of user-defined to control
the checkpointing process.
The new checkpointing request is started by Primary VM,
and the interactive process like below:
Checkpoint synchronizing points:
Primary Secondary
initial work
'checkpoint-ready' <-------------------- @
'checkpoint-request' @ -------------------->
Suspend (Only in hybrid mode)
'checkpoint-reply' <-------------------- @
Suspend&Save state
'vmstate-send' @ -------------------->
Send state Receive state
'vmstate-received' <-------------------- @
Release packets Load state
'vmstate-load' <-------------------- @
Resume Resume (Only in hybrid mode)
Start Comparing (Only in hybrid mode)
NOTE:
1) '@' who sends the message
2) Every sync-point is synchronized by two sides with only
one handshake(single direction) for low-latency.
If more strict synchronization is required, a opposite direction
sync-point should be added.
3) Since sync-points are single direction, the remote side may
go forward a lot when this side just receives the sync-point.
4) For now, we only support 'periodic' checkpoint, for which
the Secondary VM is not running, later we will support 'hybrid' mode.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
This new communication path will be used for returning messages
from Secondary side to Primary side.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Switch from normal migration loadvm process into COLO checkpoint process if
COLO mode is enabled.
We add three new members to struct MigrationIncomingState,
'have_colo_incoming_thread' and 'colo_incoming_thread' record the COLO
related thread for secondary VM, 'migration_incoming_co' records the
original migration incoming coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Add a new migration state: MIGRATION_STATUS_COLO. Migration source side
enters this state after the first live migration successfully finished
if COLO is enabled by command 'migrate_set_capability x-colo on'.
We reuse migration thread, so the process of checkpointing will be handled
in migration thread.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We add helper function colo_supported() to indicate whether
colo is supported or not, with which we use to control whether or not
showing 'x-colo' string to users, they can use qmp command
'query-migrate-capabilities' or hmp command 'info migrate_capabilities'
to learn if colo is supported.
The default value for COLO (COarse-Grain LOck Stepping) is disabled.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
