Try to perform IO for the biggest continuous block possible.
The performance for sequential read is increased from 220 Mb/sec to
360 Mb/sec for continous image on my SSD HDD.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-23-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-22-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The software driver must set inuse field in Parallels header to
0x746F6E59 when the image is opened in read-write mode. The presence of
this magic in the header on open forces image consistency check.
There is an unfortunate trick here. We can not check for inuse in
parallels_check as this will happen too late. It is possible to do
that for simple check, but during the fix this would always report
an error as the image was opened in BDRV_O_RDWR mode. Thus we save
the flag in BDRVParallelsState for this.
On the other hand, nothing should be done to clear inuse in
parallels_check. Generic close will do the job right.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-21-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The check is very simple at the moment. It calculates necessary stats
and fix only the following errors:
- space leak at the end of the image. This would happens due to
preallocation
- clusters outside the image are zeroed. Nothing else could be done here
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-20-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will help to avoid forward declarations for upcoming parallels_check
Some very obvious formatting fixes were made to the moved code to make
checkpatch happy.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-19-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This metadata cache would allow to properly batch BAT updates to disk
in next patches. These updates will be properly aligned to avoid
read-modify-write transactions on block level.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-18-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will allow to use this data as buffer to BAT update directly
without any intermediate buffers.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-17-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
deduplicate copy/paste arithmetcs
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-16-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
BAT means 'block allocation table'. Thus this name is clean and shorter
on writing.
Some obvious formatting fixes in the old code were made to make checkpatch
happy.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-15-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-14-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-13-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Do not even care to create WithoutFreeSpace image, it is obsolete.
Always create WithouFreSpacExt one.
The code also does not spend a lot of efforts to fill cylinders and
heads fields, they are not used actually in a real life neither in
QEMU nor in Parallels products.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-12-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-11-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Support write on Parallels images. The code is almost the same as one
in the previous patch implemented scatter-gather IO for read.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-10-git-send-email-den@openvz.org
CC: Roman Kagan <rkagan@parallels.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
From the guest point of view unallocated blocks are zeroed.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-9-git-send-email-den@openvz.org
CC: Roman Kagan <rkagan@parallels.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
simple purification..
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-8-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Main approach is taken from qcow2_co_readv.
The patch drops coroutine lock for the duration of IO operation and
peforms normal scatter-gather IO using standard QEMU backend.
The patch also adds comment about locking considerations in the driver.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-7-git-send-email-den@openvz.org
CC: Roman Kagan <rkagan@parallels.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement VFS method for get_block_status to Parallels format driver.
qemu_co_mutex_lock is not necessary yet (the driver is read-only) but
will be necessary very soon when write will be supported.
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1430207220-24458-6-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Teach parallels_read() to do reads in coarser granularity than just a
single sector: if requested, read up to the cluster end in one go.
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1430207220-24458-5-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Switch the .bdrv_read method implementation from using bdrv_pread() to
bdrv_read() on the underlying file, since the latter is subject to i/o
throttling while the former is not.
Besides, since bdrv_read() operates in sectors rather than bytes, adjust
the helper functions to do so too.
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1430207220-24458-4-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this follows QEMU coding convention
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1430207220-24458-3-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
suggested by Jeff Cody
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1430207220-24458-2-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While conditionalized on SSE2, it's a "portable" gcc generic vector
implementation, which could be enabled on other hosts.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Consider this case:
$ ls -ld ~/root-owned/
drwx--x--x. 2 root root 4096 Apr 29 12:55 /home/crobinso/root-owned/
$ ls -l ~/root-owned/foo.sock
-rwxrwxrwx. 1 crobinso crobinso 0 Apr 29 12:55 /home/crobinso/root-owned/foo.sock
$ qemu-system-x86_64 -vnc unix:~/root-owned/foo.sock
qemu-system-x86_64: -vnc unix:/home/crobinso/root-owned/foo.sock: Failed to start VNC server: Failed to bind socket to /home/crobinso/root-owned/foo.sock: Address already in use
...which is techinically true, but the real error is that we failed to
unlink. So report it.
This may seem pathological but it's a real possibility via libvirt.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before:
qemu-system-x86_64: -display vnc=unix:/root/foo.sock: Failed to start VNC server on `(null)': Failed to bind socket to /root/foo.sock: Permission denied
After:
qemu-system-x86_64: -display vnc=unix:/root/foo.sock: Failed to start VNC server: Failed to bind socket to /root/foo.sock: Permission denied
Rather than tweak the string possibly show unix: value as well,
just drop the explicit display reporting. We already get the cli
string in the error message, that should be sufficient.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The qemu_acl_init() function has long since stopped being able
to return NULL, since g_malloc will abort on OOM. As such the
checks for NULL were unreachable code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit v2.2.0-1530-ge556032 vnc: switch to inet_listen_opts
bypassed the use of inet_parse in inet_listen, making literal
IPv6 addresses enclosed in brackets fail:
qemu-kvm: -vnc [::1]:0: Failed to start VNC server on `(null)': address
resolution failed for [::1]:5900: Name or service not known
Strip the brackets to make it work again.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Put the number of serial ports into a local variable in
multi_serial_pci_realize, then increment the port count
(pci->ports) as we initialize the serial port cores.
Now pci->ports always holds the number of successfully
initialized ports and we can use multi_serial_pci_exit
to properly cleanup the already initialized bits in case
of a init failure.
https://bugzilla.redhat.com/show_bug.cgi?id=970551
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
* fix various issues with full screen in the OSX UI
* set an icon for our binary file
* add entries to the View menu for QEMU consoles
* fix various warnings that are produced when building on 10.10
(largely deprecated interfaces)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dZVT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-cocoa-20150519' into staging
cocoa queue:
* fix various issues with full screen in the OSX UI
* set an icon for our binary file
* add entries to the View menu for QEMU consoles
* fix various warnings that are produced when building on 10.10
(largely deprecated interfaces)
# gpg: Signature made Tue May 19 09:17:23 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-cocoa-20150519:
ui/cocoa: Add console items to the View menu
ui/cocoa: Avoid deprecated NSOKButton/NSCancelButton constants
ui/cocoa: Don't use NSWindow useOptimizedDrawing on OSX 10.10 and up
ui/cocoa: Declare that QemuCocoaAppController implements NSApplicationDelegate
ui/cocoa: openPanelDidEnd returnCode should be NSInteger, not int
ui/cocoa: Remove compatibility ifdefs for OSX 10.4
ui/cocoa: Drop tests for CGImageCreateWithImageInRect support
Makefile.target: set icon for binary file on Mac OS X
ui/cocoa: Make -full-screen option work on Mac OS X
ui/cocoa: Fix several full screen issues on Mac OS X
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add any console that is available to the current emulator as a
menu item under the View menu.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
[PMM: Adjusted to apply after zoom-to-fit menu item was added;
create the View menu at the same time as all the others, and only
add the dynamically-determined items to it later]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In OSX 10.10, the NSOKButton and NSCancelButton constants are deprecated
and provoke compiler warnings. Avoid them by using the
NSFileHandlingPanelCancelButton and NSFileHandlingPanelOKButton constants
instead. These are the documented correct constants for the 10.6-and-up
beginSheetModalForWindow API we use. We also use the same method for
the pre-10.6 compatibility code path, but conveniently the constant
values are the same and the constant names have been present since 10.0.
Preferring the constant names that match the non-legacy API makes more
sense anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1431296361-16981-7-git-send-email-peter.maydell@linaro.org
Our class QemuCocoaAppController implements the NSApplicationDelegate
interface, and we pass an object of this class to [NSApp setDelegate].
However, we weren't declaring in the class definition that we implemented
this interface; in OSX 10.10 this provokes the following (slighly
misleading) warning:
ui/cocoa.m:1031:24: warning: sending 'QemuCocoaAppController *' to parameter of
incompatible type 'id<NSFileManagerDelegate>'
[NSApp setDelegate:appController];
^~~~~~~~~~~~~
/System/Library/Frameworks/Foundation.framework/Headers/NSFileManager.h:109:47:
note: passing argument to parameter 'delegate' here
@property (assign) id <NSFileManagerDelegate> delegate NS_AVAILABLE(10_5,
2_0);
^
Annoyingly, this interface wasn't formally defined until OSX 10.6, so we
have to surround the relevant part of the @interface line with an ifdef.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1431296361-16981-5-git-send-email-peter.maydell@linaro.org
The type for openPanelDidEnd's returnCode argument should be NSInteger,
not int. This only matters for the OSX 10.5 code path where we pass
the method directly to an OSX function to call.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1431296361-16981-4-git-send-email-peter.maydell@linaro.org
The code that tries to test at both compiletime and runtime
for whether CGImageCreateWithImageInRect is supported provokes
a compile warning on OSX 10.3:
ui/cocoa.m:378:13: warning: comparison of function 'CGImageCreateWithImageInRect'
equal to a null pointer is always false[-Wtautological-pointer-compare]
if (CGImageCreateWithImageInRect == NULL) { // test if "CGImageCreateWithImageInRect" is
supported on host at runtime
^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~
The simplest way to deal with this is just to drop this code,
since we don't in practice support OSX 10.4 anyway. (10.5 was
released in 2007 and is the last PPC version, so is the earliest
we really need to continue to support at all.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1431296361-16981-2-git-send-email-peter.maydell@linaro.org
Implements setting the icon for the binary file in Mac OS X.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
[PMM: tweaked makefile to use $@ and quiet-command]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch makes the -full-screen option actually instruct QEMU to
enter fullscreen at startup, on Mac OS X.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch makes several changes:
- Minimizes distorted full screen display by respecting aspect
ratios.
- Makes full screen mode available on Mac OS 10.7 and higher.
- Allows user to decide if video should be stretched to fill the
screen, using a menu item called "Zoom To Fit".
- Hides the normalWindow so it won't show up in full screen mode.
- Allows user to exit full screen mode.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
[PMM: minor whitespace tweaks, remove incorrectly duplicated
use of 'f' menu accelerator key]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even if an exception isn't taken, the status flags need updating
and the result should be written to the destination. Move the body
of cvtql out of line, since we now always need a call.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ignore DNZ if software completion isn't used. Raise INV for
denormals in system mode so the OS completion handler sees them.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
