previous commit change image mips little -> big endian
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: split from merged patch]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
By itself this doesn't add much to our coverage. However later patches
will extend this image to include more bleeding edge libraries which
are not yet widely available in distros.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: extend commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We'll also want to support some older Debian combinations for
architectures that didn't make the Debian 9 cut.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: extend commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When a test fails/hangs you don't want the hassle of getting the debug
tools installed. Lets install them on our image by default so we can
debug when we need to.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Although the upstream Travis images don't need this library our
"travis-lite" scripts are written in python. This allows us to do:
make docker-travis@travis J=10
and approximate a travis run on their default image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* new model of the ARM MPS2/MPS2+ FPGA based development board
* clean up DISAS_* exit conditions and fix various regressions
since commits e75449a3468a6b28c7b5 (in particular including
ones which broke OP-TEE guests)
* make Cortex-M3 and M4 correctly default to 8 PMSA regions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gVxi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170717' into staging
target-arm queue:
* new model of the ARM MPS2/MPS2+ FPGA based development board
* clean up DISAS_* exit conditions and fix various regressions
since commits e75449a3468a6b28c7b5 (in particular including
ones which broke OP-TEE guests)
* make Cortex-M3 and M4 correctly default to 8 PMSA regions
# gpg: Signature made Mon 17 Jul 2017 13:43:45 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20170717:
MAINTAINERS: Add entries for MPS2 board
hw/arm/mps2: Add ethernet
hw/arm/mps2: Add SCC
hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller
hw/arm/mps2: Add timers
hw/char/cmsdk-apb-timer: Implement CMSDK APB timer device
hw/arm/mps2: Add UARTs
hw/char/cmsdk-apb-uart.c: Implement CMSDK APB UART
hw/arm/mps2: Implement skeleton mps2-an385 and mps2-an511 board models
target/arm: use DISAS_EXIT for eret handling
target/arm: use gen_goto_tb for ISB handling
target/arm/translate: ensure gen_goto_tb sets exit flags
target/arm/translate.h: expand comment on DISAS_EXIT
target/arm/translate: make DISAS_UPDATE match declared semantics
include/exec/exec-all: document common exit conditions
target/arm: Make Cortex-M3 and M4 default to 8 PMSA regions
qdev: support properties which don't set a default value
qdev-properties.h: Explicitly set the default value for arraylen properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces the CPU model for z14, along with all base and
optional features.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Because global environment variables can be overridden when .travis.yml
is processed by the docker-travis target, the effect of this patch is
that docker-travis now obeys the "J=n" option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This is useful so that we can do builds at higher than -j3 when running
travis.py locally.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJZbKrNAAoJEO8Ells5jWIRzWkH/0GgEkT5XqSPR8gTixxR5+aT
1+LvlqI861/oR3aZ/1+6nzbFF4RBHO0TJb9v8HovfaOMU/tjaVMOGOD98+rqToa7
2P2BTQo5jfsQhzGj2GBWnjpTqYunUjXdT0jjZAdERGqrNjoFOGhAjFXPvTKL23d5
haDgRQgTh2z4w+rvuHNQ79S8tCDtUGvH1i9fIpWNnVLlv4Lea8XJlm7p2+jNQslF
W2ysoQ6PR/3HihtqMwsh4ZBJAQfhEpJcrcLeq5wWEdg40U2JVA1MjpX0q58X6fRJ
YQ36K0vxmdnxdCK6NnoMLkGqI12aRqJnFEq0Avc3dC2U0OWIfNk4mp8X0Vr8o+s=
=z3QF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 17 Jul 2017 13:17:17 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
virtio-net: fix offload ctrl endian
virtion-net: Prefer is_power_of_2()
docs/colo-proxy.txt: Update colo-proxy usage of net driver with vnet_header
net/filter-rewriter.c: Make filter-rewriter support vnet_hdr_len
net/colo-compare.c: Add vnet packet's tcp/udp/icmp compare
net/colo.c: Add vnet packet parse feature in colo-proxy
net/colo-compare.c: Make colo-compare support vnet_hdr_len
net/colo-compare.c: Introduce parameter for compare_chr_send()
net/colo.c: Make vnet_hdr_len as packet property
net/filter-mirror.c: Add new option to enable vnet support for filter-redirector
net/filter-mirror.c: Make filter mirror support vnet support.
net/filter-mirror.c: Introduce parameter for filter_send()
net/net.c: Add vnet_hdr support in SocketReadState
net: Add vnet_hdr_len arguments in NetClientState
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch documents (including their QMP invocations) all the four
major kinds of live block operations:
- `block-stream`
- `block-commit`
- `drive-mirror` (& `blockdev-mirror`)
- `drive-backup` (& `blockdev-backup`)
Things considered while writing this document:
- Use reStructuredText as markup language (with the goal of generating
the HTML output using the Sphinx Documentation Generator). It is
gentler on the eye, and can be trivially converted to different
formats. (Another reason: upstream QEMU is considering to switch to
Sphinx, which uses reStructuredText as its markup language.)
- Raw QMP JSON output vs. 'qmp-shell'. I debated with myself whether
to only show raw QMP JSON output (as that is the canonical
representation), or use 'qmp-shell', which takes key-value pairs. I
settled on the approach of: for the first occurrence of a command,
use raw JSON; for subsequent occurrences, use 'qmp-shell', with an
occasional exception.
- Usage of `-blockdev` command-line.
- Usage of 'node-name' vs. file path to refer to disks. While we have
`blockdev-{mirror, backup}` as 'node-name'-alternatives for
`drive-{mirror, backup}`, the `block-commit` command still operates
on file names for parameters 'base' and 'top'. So I added a caveat
at the beginning to that effect.
Refer this related thread that I started (where I learnt
`block-stream` was recently reworked to accept 'node-name' for 'top'
and 'base' parameters):
https://lists.nongnu.org/archive/html/qemu-devel/2017-05/msg06466.html
"[RFC] Making 'block-stream', and 'block-commit' accept node-name"
All commands showed in this document were tested while documenting.
Thanks: Eric Blake for the section: "A note on points-in-time vs file
names". This useful bit was originally articulated by Eric in his
KVMForum 2015 presentation, so I included that specific bit in this
document.
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170717105205.32639-3-kchamart@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This is part of the on-going effort to convert QEMU upstream
documentation syntax to reStructuredText (rST).
The conversion to rST was done using:
$ pandoc -f markdown -t rst bitmaps.md -o bitmaps.rst
Then, make a couple of small syntactical adjustments. While at it,
reword a statement to avoid ambiguity. Addressing the feedback from
this thread:
https://lists.nongnu.org/archive/html/qemu-devel/2017-06/msg05428.html
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170717105205.32639-2-kchamart@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
In the first line of run_agent,it has set ga_state = s,don't need
set ga_state = s again behind.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 161a56a906 added command guest-get-users and requires the
utmpx.h (defined by POSIX) to work. It is however not always available
(e.g. on OpenBSD) therefor a check for its existence is necessary.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
glib depends on libpcre which was not shipped with the MSI, thus
starting of the qemu-ga.exe failed with the respective error message.
Tell WIXL to ship this library with the MSI to avoid this problem.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
CC: Stefan Weil <sw@weilnetz.de>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1357789
Replace hardcoded user and group names ("Administrators", "SYSTEM") with the ones acquired from system. Windows uses localized strings for these names and it may cause the installation to fail.
Windows has Well-known SIDs for "Administrators" group and "SYSTEM" user so they were used to identify required users and groups.
Well-known SIDs: https://support.microsoft.com/en-us/help/243330/well-known-security-identifiers-in-windows-operating-systems
Signed-off-by: Daniel Rempel <daniel@daynix.com>
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Reviewed-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
A typo in commit 23e099c set the size of buf[] used in response
to NBD_OPT_EXPORT_NAME according to the length needed for old-style
negotiation (4 bytes of flag information) instead of the intended
2 bytes used in new style. If the client doesn't enable
NBD_FLAG_C_NO_ZEROES, then the server sends two bytes too many,
and is then out of sync in response to the client's next command
(the bug is masked when modern qemu is the client, since we enable
the no zeroes flag).
While touching this code, add some more defines to nbd_internal.h
rather than having quite so many magic numbers in the .c; also,
use "" initialization rather than memset(), and tweak the oldstyle
negotiation to better match the spec description of the layout
(since the spec is big-endian, skipping two bytes as 0 followed by
writing a 2-byte flag is the same as writing a zero-extended 4-byte
flag), to make it a bit easier to follow compared to the spec.
[checkpatch.pl has some false positives in the comments]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170717192635.17880-3-eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Make the client trace slightly more legible by including the name
of the command being sent.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20170717192635.17880-2-eblake@redhat.com>
The rotation is to the left, but extract shifts to the right.
The computation of the extract parameters needs adjusting.
For the entry condition, simplify
64 - rot + len <= 64
-rot + len <= 0
len <= rot
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reported-by: David Hildenbrand <david@redhat.com>
Suggested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
STFL bit 4 and 5 are just indications to the guest, which TLB entries an
IDTE call will clear. These are performance indicators for the guest.
STFL bit 4:
INVALIDATE DAT TABLE ENTRY (IDTE) performs
the invalidation-and-clearing operation by
selectively clearing TLB segment-table entries
when a segment-table entry or entries are
invalidated. IDTE also performs the clearing-by-
ASCE operation. Unless bit 4 is one, IDTE simply
purges all TLBs. Bit 3 is one if bit 4 is one.
We can simply set STFL bit 4 ("idtes") and still purge the complete TLB.
Purging more than advertised is never bad. E.g. Linux doesn't even care
about this bit. We can optimized this later.
This is helpful, as the z9 base model contains this facility.
STFL bit 5 (clearing TLB region-table-entries) was never implemented on
real HW, therefore we can simply ignore it for now.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170627161032.5014-1-david@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Drop TRT from the set of insns handled internally by EXECUTE.
It's more important to adjust the existing helper to handle
both TRT and TRTR.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since we require all registers saved on input, read R0 from ENV instead
of passing it manually. Recognize the specification exception when R0
contains incorrect data. Keep high bits of result registers unmodified
when in 31 or 24-bit mode.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Commit 8ecaeae8 changed the way the client requests an NBD export,
and in the process also changed the resulting error message when
the export is not present, breaking a couple of iotests. The error
message is now directly given by the server (a failed NBD_OPT_GO)
instead of implied by the client (after exhausting NBD_OPT_LIST),
but looking at the testsuite changes, it proves worthwhile to
reword the error message to be slightly less verbose (as this is
one particular error message likely to be hit by a user).
Note that the error message is now sensitive to which binary is
running the server as well as the client (since the expected
output is replaying a message received from the server - for that
matter, it depends on a server new enough to understand NBD_OPT_GO);
in general iotests are run on client and server from the same source
code base so the default setup will pass; but if it proves
problematic for people overriding QEMU_PROG, QEMU_IMG_PROG,
QEMU_IO_PROG, and QEMU_NBD_PROG to point across multiple builds for
cross-version integration testing, we may have to later tweak or
sanitize the output somehow.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170717142310.17048-1-eblake@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Include name of parent type of each type on 'qom-list-types' output.
Without this, there's no way to figure out the parents of a given type
without making additional 'qom-list-types' queries.
In addition to the test case for the new feature, update the
abstract-interface test case to use the new field and avoid the
"qom-list-types implements=object" trick.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707122215.8819-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
