In this pull request:
- RDMA cleanups
- compression cleanups
CI: https://gitlab.com/juan.quintela/qemu/-/pipelines/1040780020
Please apply.
PD. I tried to get the deprecated bits integrated, but I broke
qemu-iotests duer to blk warning. Will resend it.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmUvrjQACgkQ9IfvGFhy
1yODnQ/+OKaOQMAEtJsJ1B67394VRjpGDd0K47U3uewJJ26XRMUy4uw0zeGYdiBc
VFjrX1NJu4jRZBOdhRzZQLZU9wDEGY/8zIL/sJB55X/gv1EysDB3IrNCWosNL8SS
weeYu9qkxsB5aJfM4Lp6XnPIplb7PIMSqX380sUGcK7uVLo3x3H8PgFxQszG5ZMs
8OqhOdxZ8jPc7gUOxPcA0n/L6pJcfnuK1/8Vlf5wbkdD+lyVCs0QDTSgX8AnS5hd
DniV2nMFkVvNkOhDG3X8qr8FyjyQ9eyJxxw/2Nt+0201UIiCirz3U2T6EMejCYOv
LtIaaNaNHmEw5OdfSBhEjXOy7gHavcn+/LlUexYJQSiB/CXrdgh3jpSFmlAzcAY2
Si514BRty6WX43f+698PSAKF4XaRnPGtvVCv7ubrFb1qVrg8DTEnYXNO+LadqSBS
bu1TpRK1iVgKnApQN1SQr26MRAzU+U+yqz/MB9QzIGwonM2TEWCF6c5Sqq6/RK8S
IIDu4s/NTx0wVWrR2rAZv335ANGa7oa1z2LykxcXmBJozqWAOgo6wzZJJ3klcpjZ
Li39m2jzx36oSKqudYANxj2Ds0MvXStnd2ZX9mQiEB++S2SY2Z8he57HESQwNzf0
0Z61eqdHr7th4zfLz/akiiZnRs66A+6/LFRFpoKedSAABE/sKY8=
=gNbf
-----END PGP SIGNATURE-----
Merge tag 'migration-20231018-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (20231018)
In this pull request:
- RDMA cleanups
- compression cleanups
CI: https://gitlab.com/juan.quintela/qemu/-/pipelines/1040780020
Please apply.
PD. I tried to get the deprecated bits integrated, but I broke
qemu-iotests duer to blk warning. Will resend it.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmUvrjQACgkQ9IfvGFhy
# 1yODnQ/+OKaOQMAEtJsJ1B67394VRjpGDd0K47U3uewJJ26XRMUy4uw0zeGYdiBc
# VFjrX1NJu4jRZBOdhRzZQLZU9wDEGY/8zIL/sJB55X/gv1EysDB3IrNCWosNL8SS
# weeYu9qkxsB5aJfM4Lp6XnPIplb7PIMSqX380sUGcK7uVLo3x3H8PgFxQszG5ZMs
# 8OqhOdxZ8jPc7gUOxPcA0n/L6pJcfnuK1/8Vlf5wbkdD+lyVCs0QDTSgX8AnS5hd
# DniV2nMFkVvNkOhDG3X8qr8FyjyQ9eyJxxw/2Nt+0201UIiCirz3U2T6EMejCYOv
# LtIaaNaNHmEw5OdfSBhEjXOy7gHavcn+/LlUexYJQSiB/CXrdgh3jpSFmlAzcAY2
# Si514BRty6WX43f+698PSAKF4XaRnPGtvVCv7ubrFb1qVrg8DTEnYXNO+LadqSBS
# bu1TpRK1iVgKnApQN1SQr26MRAzU+U+yqz/MB9QzIGwonM2TEWCF6c5Sqq6/RK8S
# IIDu4s/NTx0wVWrR2rAZv335ANGa7oa1z2LykxcXmBJozqWAOgo6wzZJJ3klcpjZ
# Li39m2jzx36oSKqudYANxj2Ds0MvXStnd2ZX9mQiEB++S2SY2Z8he57HESQwNzf0
# 0Z61eqdHr7th4zfLz/akiiZnRs66A+6/LFRFpoKedSAABE/sKY8=
# =gNbf
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 Oct 2023 03:06:44 PDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20231018-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: save_zero_page() can take block through pss
migration: control_save_page() can take block through pss
migration: save_compress_page() can take block through pss
migration: Print block status when needed
migration: Use "i" as an for index in ram-compress.c
migration: Simplify decompress_data_with_multi_threads()
migration: Move update_compress_threads_counts() to ram-compress.c
migration: Create ram_compressed_pages()
migration: Create populate_compress()
migration: Move compression_counters cleanup ram-compress.c
migration: RDMA is not compatible with anything else
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU coding style uses the glib memory allocation APIs, not
the raw libc malloc/free. Switch the allocation and free
calls in elf2dmp to use these functions (dropping the now-unneeded
checks for failure).
Signed-off-by: Suraj Shirvankar <surajshirvankar@gmail.com>
Message-id: 169753938460.23804.11418813007617535750-1@git.sr.ht
[PMM: also remove NULL checks from g_malloc() calls;
beef up commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The counter register is only 24-bits and counts down. If the timer is
running but the qtimer to reset it hasn't fired off yet, there is a chance
the regster read can return an invalid result.
Signed-off-by: Chris Rauer <crauer@google.com>
Message-id: 20230922181411.2697135-1-crauer@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code for powering on a CPU in arm-powerctl.c has two separate
use cases:
* emulation of a real hardware power controller
* emulation of firmware interfaces (primarily PSCI) with
CPU on/off APIs
For the first case, we only need to reset the CPU and set its
starting PC and X0. For the second case, because we're emulating the
firmware we need to ensure that it's in the state that the firmware
provides. In particular, when we reset to a lower EL than the
highest one we are emulating, we need to put the CPU into a state
that permits correct running at that lower EL. We already do a
little of this in arm-powerctl.c (for instance we set SCR_HCE to
enable the HVC insn) but we don't do enough of it. This means that
in the case where we are emulating EL3 but also providing emulated
PSCI the guest will crash when a secondary core tries to use a
feature that needs an SCR_EL3 bit to be set, such as MTE or PAuth.
The hw/arm/boot.c code also has to support this "start guest code in
an EL that's lower than the highest emulated EL" case in order to do
direct guest kernel booting; it has all the necessary initialization
code to set the SCR_EL3 bits. Pull the relevant boot.c code out into
a separate function so we can share it between there and
arm-powerctl.c.
This refactoring has a few code changes that look like they
might be behaviour changes but aren't:
* if info->secure_boot is false and info->secure_board_setup is
true, then the old code would start the first CPU in Hyp
mode but without changing SCR.NS and NSACR.{CP11,CP10}.
This was wrong behaviour because there's no such thing
as Secure Hyp mode. The new code will leave the CPU in SVC.
(There is no board which sets secure_boot to false and
secure_board_setup to true, so this isn't a behaviour
change for any of our boards.)
* we don't explicitly clear SCR.NS when arm-powerctl.c
does a CPU-on to EL3. This was a no-op because CPU reset
will reset to NS == 0.
And some real behaviour changes:
* we no longer set HCR_EL2.RW when booting into EL2: the guest
can and should do that themselves before dropping into their
EL1 code. (arm-powerctl and boot did this differently; I
opted to use the logic from arm-powerctl, which only sets
HCR_EL2.RW when it's directly starting the guest in EL1,
because it's more correct, and I don't expect guests to be
accidentally depending on our having set the RW bit for them.)
* if we are booting a CPU into AArch32 Secure SVC then we won't
set SCR.HCE any more. This affects only the vexpress-a15 and
raspi2b machine types. Guests booting in this case will either:
- be able to set SCR.HCE themselves as part of moving from
Secure SVC into NS Hyp mode
- will move from Secure SVC to NS SVC, and won't care about
behaviour of the HVC insn
- will stay in Secure SVC, and won't care about HVC
* on an arm-powerctl CPU-on we will now set the SCR bits for
pauth/mte/sve/sme/hcx/fgt features
The first two of these are very minor and I don't expect guest
code to trip over them, so I didn't judge it worth convoluting
the code in an attempt to keep exactly the same boot.c behaviour.
The third change fixes issue 1899.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1899
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230926155619.4028618-1-peter.maydell@linaro.org
The hw/arm/boot.h include in common-semi-target.h is not actually
needed, and it's a bit odd because it pulls a hw/arm header into a
target/arm file.
This include was originally needed because the semihosting code used
the arm_boot_info struct to get the base address of the RAM in system
emulation, to use in a (bad) heuristic for the return values for the
SYS_HEAPINFO semihosting call. We've since overhauled how we
calculate the HEAPINFO values in system emulation, and the code no
longer uses the arm_boot_info struct.
Remove the now-redundant include line, and instead directly include
the cpu-qom.h header that we were previously getting via boot.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230925112219.3919261-1-peter.maydell@linaro.org
The include of hw/arm/virt.h in kvm64.c is unnecessary and also a
layering violation since the generic KVM code shouldn't need to know
anything about board-specifics. The include line is an accidental
leftover from commit 15613357ba, where we cleaned up the code
to not depend on virt board internals but forgot to also remove the
now-redundant include line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230925110429.3917202-1-peter.maydell@linaro.org
FEAT_HPMN0 is a small feature which defines that it is valid for
MDCR_EL2.HPMN to be set to 0, meaning "no PMU event counters provided
to an EL1 guest" (previously this setting was reserved). QEMU's
implementation almost gets HPMN == 0 right, but we need to fix
one check in pmevcntr_is_64_bit(). That is enough for us to
advertise the feature in the 'max' CPU.
(We don't need to make the behaviour conditional on feature
presence, because the FEAT_HPMN0 behaviour is within the range
of permitted UNPREDICTABLE behaviour for a non-FEAT_HPMN0
implementation.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230921185445.3339214-1-peter.maydell@linaro.org
The SMMUv3.1-XNX feature is mandatory for an SMMUv3.1 if S2P is
supported, so we should theoretically have implemented it as part of
the recent S2P work. Fortunately, for us the implementation is a
no-op.
This feature is about interpretation of the stage 2 page table
descriptor XN bits, which control execute permissions.
For QEMU, the permission bits passed to an IOMMU (via MemTxAttrs and
IOMMUAccessFlags) only indicate read and write; we do not distinguish
data reads from instruction reads outside the CPU proper. In the
SMMU architecture's terms, our interconnect between the client device
and the SMMU doesn't have the ability to convey the INST attribute,
and we therefore use the default value of "data" for this attribute.
We also do not support the bits in the Stream Table Entry that can
override the on-the-bus transaction attribute permissions (we do not
set SMMU_IDR1.ATTR_PERMS_OVR=1).
These two things together mean that for our implementation, it never
has to deal with transactions with the INST attribute, and so it can
correctly ignore the XN bits entirely. So we already implement
FEAT_XNX's "XN field is now 2 bits, not 1" behaviour to the extent
that we need to.
Advertise the presence of the feature in SMMU_IDR3.XNX.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230914145705.1648377-4-peter.maydell@linaro.org
In smmuv3_init_regs() when we set the various bits in the ID
registers, we do this almost in order of the fields in the
registers, but not quite. Move the initialization of
SMMU_IDR3.RIL and SMMU_IDR5.OAS into their correct places.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230914145705.1648377-3-peter.maydell@linaro.org
Update the SMMUv3 ID register bit field definitions to the
set in the most recent specification (IHI0700 F.a).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230914145705.1648377-2-peter.maydell@linaro.org
For the Thumb T32 encoding of LDM, if only a single register is
specified in the register list this instruction is UNPREDICTABLE,
with the following choices:
* instruction UNDEFs
* instruction is a NOP
* instruction loads a single register
* instruction loads an unspecified set of registers
Currently we choose to UNDEF (a behaviour chosen in commit
4b222545db in 2019; previously we treated it as "load the
specified single register").
Unfortunately there is real world code out there (which shipped in at
least Android 11, 12 and 13) which incorrectly uses this
UNPREDICTABLE insn on the assumption that it does a single register
load, which is (presumably) what it happens to do on real hardware,
and is also what it does on the equivalent A32 encoding.
Revert to the pre-4b222545dbf30 behaviour of not UNDEFing
for this T32 encoding.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1799
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230927101853.39288-1-peter.maydell@linaro.org
We can neaten the code by switching the callers that work on a
CPUstate to the kvm_get_one_reg function.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231010142453.224369-3-cohuck@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can neaten the code by switching to the kvm_set_one_reg function.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231010142453.224369-2-cohuck@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the private peripheral interrupt definitions from bsa.h instead of
defining them locally. Refactor to use the INTIDs defined there instead
of the PPI# used previously.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230919090229.188092-4-quic_llindhol@quicinc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virt.h defines a number of IRQs that are ultimately described by Arm's
Base System Architecture specification. Move these to a dedicated header
so that they can be reused by other platforms that do the same.
Include that header from virt.h to minimise churn.
While we're moving the definitions, sort them into numerical order,
and add the ARCH_TIMER_NS_EL2_VIRT_IRQ definition used by sbsa-ref
and which will eventually be needed by virt also.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230919090229.188092-3-quic_llindhol@quicinc.com
[PMM: Remove unused PPI_TO_INTID macro; sort numerically;
add ARCH_TIMER_NS_EL2_VIRT_IRQ]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GIC Private Peripheral Interrupts (PPI) are defined as GIC INTID 16-31.
As in, PPI0 is INTID16 .. PPI15 is INTID31.
Arm's Base System Architecture specification (BSA) lists the mandated and
recommended private interrupt IDs by INTID, not by PPI index. But current
definitions in virt define them by PPI index, complicating cross
referencing.
Meanwhile, the PPI(x) macro counterintuitively adds 16 to the input value,
converting a PPI index to an INTID.
Resolve this by redefining the BSA-allocated PPIs by their INTIDs,
and replacing the PPI(x) macro with an INTID_TO_PPI(x) one where required.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230919090229.188092-2-quic_llindhol@quicinc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On an attempt to access CNTPCT_EL0 from EL0 using a guest running on top
of Xen, a trap from EL2 was observed which is something not reproducible
on HW (also, Xen does not trap accesses to physical counter).
This is because gt_counter_access() checks for an incorrect bit (1
instead of 0) of CNTHCTL_EL2 if HCR_EL2.E2H is 0 and access is made to
physical counter. Refer ARM ARM DDI 0487J.a, D19.12.2:
When HCR_EL2.E2H is 0:
- EL1PCTEN, bit [0]: refers to physical counter
- EL1PCEN, bit [1]: refers to physical timer registers
Drop entire block "if (hcr & HCR_E2H) {...} else {...}" from EL0 case
and fall through to EL1 case, given that after fixing checking for the
correct bit, the handling is the same.
Fixes: 5bc8437136 ("target/arm: Update timer access for VHE")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Message-id: 20230928094404.20802-1-michal.orzel@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Index in file_size array must be checked against num_files, because the
entries we are looking for may be absent in the PDB.
Fixes: Coverity CID 1521597
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230930235317.11469-3-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
String sign_rsds isn't terminated, so the print length must be limited.
Fixes: Coverity CID 1521598
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230930235317.11469-2-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This replaces the comma (,) to dot (.) in the device type name
so the name can be used with the 'driver=' command line option.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20231003052139.199665-1-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change implements the ResettableClass interface for the device.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20231004055339.323833-1-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change implements the ResettableClass interface for the device.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20231004055713.324009-1-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change implements the ResettableClass interface for the device.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231003052345.199725-1-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
struct arm_boot_info is declared in "hw/arm/boot.h".
By including the correct header we don't need to declare
it again in "target/arm/cpu-qom.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231013130214.95742-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The file is obviously related to the raspberrypi machine, so
it should reside in hw/arm/ instead of hw/misc/. And while we're
at it, also adjust the wildcard in MAINTAINERS so that it covers
this file, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231012073458.860187-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If printing a QAPI schema object for debugging we get the classname and
a hex value for the instance:
<qapi.schema.QAPISchemaEnumType object at 0x7f0ab4c2dad0>
<qapi.schema.QAPISchemaObjectType object at 0x7f0ab4c2dd90>
<qapi.schema.QAPISchemaArrayType object at 0x7f0ab4c2df90>
With this change we instead get the classname and the human friendly
name of the QAPI type instance:
<QAPISchemaEnumType:CpuS390State at 0x7f0ab4c2dad0>
<QAPISchemaObjectType:CpuInfoS390 at 0x7f0ab4c2dd90>
<QAPISchemaArrayType:CpuInfoFastList at 0x7f0ab4c2df90>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20231018120500.2028642-1-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Conditional swapped to avoid negation]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[Tweaked to mollify pylint]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 57df0dff1a (qapi: Extend -compat to set policy for unstable
interfaces) neglected to update the "Limitation" paragraph to mention
feature 'unstable' in addition to feature 'deprecated'. Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231009110449.4015601-1-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Some very minor housekeeping to make the linters happy once more.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20231004230532.3002201-4-jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Distinguish host SIGABRT from guest SIGABRT by mapping
the guest signal onto one of the host RT signals.
This prevents a cycle by which a host assertion failure
is caught and handled by host_signal_handler, queued for
the guest, and then we attempt to continue past the
host abort. What happens next depends on the host libc,
but is neither good nor helpful.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These signals, when not spoofed via kill(), are always bugs.
Use die_from_signal to report this sensibly.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make host_signal_handler slightly easier to read.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Install the host signal handler at the same time we are
probing the target signals for SIG_IGN/SIG_DFL. Ignore
unmapped target signals.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not return a valid signal number in one domain
when given an invalid signal number in the other domain.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The set of fatal signals is really immaterial. If one arrives,
and is unhandled, then the qemu process dies and the parent gets
the correct signal.
It is only for those signals which we would like to perform a
guest core dump instead of a host core dump that we need to catch.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If there is an internal program error in the qemu source code which
raises SIGSEGV or SIGBUS, we currently assume the signal belongs to
the guest. With an artificial error introduced, we will now print
QEMU internal SIGSEGV {code=MAPERR, addr=(nil)}
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20230812164314.352131-1-deller@gmx.de>
[rth: Use in_code_gen_buffer and die_with_signal; drop backtrace]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This line is supposed to be unreachable, but if we're going to
have it at all, SIGABRT via abort() is subject to the same signal
peril that created this function in the first place.
We can _exit immediately without peril.
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because we trap so many signals for use by the guest,
we have to take extra steps to exit properly.
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not assert success, but return any failure received.
Additionally, fix the method of earlier error return in target_munmap.
Reported-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since support for LSX and LASX is landed in QEMU recently, we can update
HWCAPS accordingly.
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231001085315.1692667-1-c@jia.je>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
sh4 uses gUSA (general UserSpace Atomicity) to provide atomicity on CPUs
that don't have atomic instructions. A gUSA region that adds 1 to an
atomic variable stored in @R2 looks like this:
4004b6: 03 c7 mova 4004c4 <gusa+0x10>,r0
4004b8: f3 61 mov r15,r1
4004ba: 09 00 nop
4004bc: fa ef mov #-6,r15
4004be: 22 63 mov.l @r2,r3
4004c0: 01 73 add #1,r3
4004c2: 32 22 mov.l r3,@r2
4004c4: 13 6f mov r1,r15
R0 contains a pointer to the end of the gUSA region
R1 contains the saved stack pointer
R15 contains negative length of the gUSA region
When this region is interrupted by a signal, the kernel detects if
R15 >= -128U. If yes, the kernel rolls back PC to the beginning of the
region and restores SP by copying R1 to R15.
The problem happens if we are interrupted by a signal at address 4004c4.
R15 still holds the value -6, but the atomic value was already written by
an instruction at address 4004c2. In this situation we can't undo the
gUSA. The function unwind_gusa does nothing, the signal handler attempts
to push a signal frame to the address -6 and crashes.
This patch fixes it, so that if we are interrupted at the last instruction
in a gUSA region, we copy R1 to R15 to restore the correct stack pointer
and avoid crashing.
There's another bug: if we are interrupted in a delay slot, we save the
address of the instruction in the delay slot. We must save the address of
the previous instruction.
Cc: qemu-stable@nongnu.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourcefoege.jp>
Message-Id: <b16389f7-6c62-70b7-59b3-87533c0bcc@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
QEMU mips userspace emulation crashes with "qemu: unhandled CPU exception
0x15 - aborting" when one of the integer arithmetic instructions detects
an overflow.
This patch fixes it so that it delivers SIGFPE with FPE_INTOVF instead.
Cc: qemu-stable@nongnu.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Message-Id: <3ef979a8-3ee1-eb2d-71f7-d788ff88dd11@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The previous change, 2d385be615, assumed !PAGE_VALID meant that
the page would be unmapped by the elf image. However, since we
reserved the entire image space via mmap, PAGE_VALID will always
be set. Instead, assume PROT_NONE for the same condition.
Furthermore, assume bss is only ever present for writable segments,
and that there is no page overlap between PT_LOAD segments.
Instead of an assert, return false to indicate failure.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1854
Fixes: 2d385be615 ("linux-user: Do not adjust zero_bss for host page size")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Support for VFIODisplay migration with ramfb
* Preliminary work for IOMMUFD support
-----BEGIN PGP SIGNATURE-----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=s0fN
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20231018' of https://github.com/legoater/qemu into staging
vfio queue:
* Support for VFIODisplay migration with ramfb
* Preliminary work for IOMMUFD support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmUvlEYACgkQUaNDx8/7
# 7KFlaw//X2053de2eTdo38/UMSzi5ACWWn2j1iGQZf/3+J2LcdlixZarZr/2DN56
# 4axmwF6+GKozt5+EnvWtgodDn6U9iyMNaAB3CGBHFHsH8uqKeZd/Ii754q4Rcmy9
# ZufBOPWm9Ff7s2MMFiAZvso75jP2wuwVEe1YPRjeJnsNSNIJ6WZfemh3Sl96yRBb
# r38uqzqetKwl7HziMMWP3yb8v+dU8A9bqI1hf1FZGttfFz3XA+pmjXKA6XxdfiZF
# AAotu5x9w86a08sAlr/qVsZFLR37oQykkXM0D840DafJDyr5fbJiq8cwfOjMw9+D
# w6+udRm5KoBWPsvb/T3dR88GRMO22PChjH9Vjl51TstMNhdTxuKJTKhhSoUFZbXV
# 8CMjwfALk5ggIOyCk1LRd04ed+9qkqgcbw1Guy5pYnyPnY/X6XurxxaxS6Gemgtn
# UvgRYhSjio+LgHLO77IVkWJMooTEPzUTty2Zxa7ldbbE+utPUtsmac9+1m2pnpqk
# 5VQmB074QnsJuvf+7HPU6vYCzQWoXHsH1UY/A0fF7MPedNUAbVYzKrdGPyqEMqHy
# xbilAIaS3oO0pMT6kUpRv5c5vjbwkx94Nf/ii8fQVjWzPfCcaF3yEfaam62jMUku
# stySaRpavKIx2oYLlucBqeKaBGaUofk13gGTQlsFs8pKCOAV7r4=
# =s0fN
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 Oct 2023 04:16:06 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20231018' of https://github.com/legoater/qemu: (22 commits)
hw/vfio: add ramfb migration support
ramfb-standalone: add migration support
ramfb: add migration support
vfio/pci: Remove vfio_detach_device from vfio_realize error path
vfio/ccw: Remove redundant definition of TYPE_VFIO_CCW
vfio/ap: Remove pointless apdev variable
vfio/pci: Fix a potential memory leak in vfio_listener_region_add
vfio/common: Move legacy VFIO backend code into separate container.c
vfio/common: Introduce a global VFIODevice list
vfio/common: Store the parent container in VFIODevice
vfio/common: Introduce a per container device list
vfio/common: Move VFIO reset handler registration to a group agnostic function
vfio/ccw: Use vfio_[attach/detach]_device
vfio/ap: Use vfio_[attach/detach]_device
vfio/platform: Use vfio_[attach/detach]_device
vfio/pci: Introduce vfio_[attach/detach]_device
vfio/common: Extract out vfio_kvm_device_[add/del]_fd
vfio/common: Introduce vfio_container_add|del_section_window()
vfio/common: Propagate KVM_SET_DEVICE_ATTR error if any
vfio/common: Move IOMMU agnostic helpers to a separate file
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a "VFIODisplay" subsection whenever "x-ramfb-migrate" is turned on.
Turn it off by default on machines <= 8.1 for compatibility reasons.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
[ clg: - checkpatch fixes
- improved warn_report() in vfio_realize() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add a "ramfb-dev" section whenever "x-migrate" is turned on. Turn it off
by default on machines <= 8.1 for compatibility reasons.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
