Place the 64bit window at the top of the physical address space, assign
25% of the avaiable address space. Force cpu.host-phys-bits=on for
microvm machine typs so this actually works reliable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-7-kraxel@redhat.com
Uses the existing gpex device which is also used as pcie host bridge on
arm/aarch64. For now only a 32bit mmio window and no ioport support.
It is disabled by default, use "-machine microvm,pcie=on" to enable.
ACPI support must be enabled too because the bus is declared in the
DSDT table.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-6-kraxel@redhat.com
Add a comment with a table listing the IRQs,
both legacy pc and microvm side-by-side.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-5-kraxel@redhat.com
Fill gpex config struct from memory map, then call the new
acpi_dsdt_add_gpex helper function. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-4-kraxel@redhat.com
Add helper function to generate dsdt aml code for the gpex pci host.
Largely copied from arm/virt. Configuration is handled by passing
a config struct instead of looked up from memory map.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-3-kraxel@redhat.com
It is defined twice already. Move to a common header file to
remove duplication and make it available to everybody.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-2-kraxel@redhat.com
This change adds a unit test to exercise the case when hotplug is disabled
both for pci root bus and the pci bridges by passing the following two
switches to qemu:
-global PIIX4_PM.acpi-root-pci-hotplug=off
-global PIIX4_PM.acpi-pci-hotplug-with-bridge-support=off
bios-tables-test-allowed-diff.h documents the fact that a new DSDT acpi gold
master binary blob we need to be added to test this. We will do the actual
addition in the next patch in the series.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200929123011.31836-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't need texinfo to build the docs any more, so we can
drop that dependency from our docker and other CI configs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-22-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We don't need the texinfo and pod2man programs to build our documentation
any more, so remove them from configure's tests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-21-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We don't use Texinfo any more; we can remove the references to the
.texi source file from our git.orderfile.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-20-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We no longer need the texi2pod script, so we can delete it, and
the special-casing it had in the checkpatch script.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-19-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Update the documentation of QAPI document comment syntax to match
the new rST backend requirements. The principal changes are:
* whitespace is now significant, and multiline definitions
must have their second and subsequent lines indented to
match the first line
* general rST format markup is permitted, not just the small
set of markup the old texinfo generator handled. For most
things (notably bulleted and itemized lists) the old format
was the same as rST is.
* Specific things that might trip people up:
- instead of *bold* and _italic_ rST has **bold** and *italic*
- lists need a preceding and following blank line
- a lone literal '*' will need to be backslash-escaped to
avoid a rST syntax error
* the old leading '|' for example (literal text) blocks is
replaced by the standard rST '::' literal block.
* we support arbitrary levels of sub- and sub-sub-heading, not
just a main and sub-heading like the old texinfo generator
* lists can now be nested
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-18-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message improved slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We no longer use the generated texinfo format documentation,
so delete the code that generates it, and the test case for
the generation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-17-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a test of the rST output from the QAPI doc-comment generator,
similar to what we currently have that tests the Texinfo output.
This is a bit more awkward with Sphinx, because the generated output
is not 100% under our control the way the QAPI-to-Texinfo generator
was. We can't observe the data we generate, only the Sphinx
output. Two issues.
One, the output can vary with the Sphinx version. In practice Sphinx's
plaintext output generation has been identical between at least Sphinx
1.6 and 3.0, so we use that. (The HTML output has had changes across
versions). We use an exact-match comparison check, with the
understanding that perhaps changes in a future Sphinx version might
require us to implement something more clever to cope with variation
in the output.
Two, the test can only protect us from changes in the data we generate
that are visible in plain text.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-16-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The automatic dependency handling for Sphinx manuals only makes the output
depend on the input documentation files. This means that if you edit
the Python source of an extension then the documentation won't be
rebuilt.
Create a list of all the source files for the extensions and add
it to the dependencies for the manuals. This is similar to how we
handle the qapi_gen_depends list.
Because we don't try to identify which manuals are using which
Sphinx extensions, a change to the source of one extension will
always rebuild the entire manual set, not merely the manuals
which have changed. This is acceptable because we don't change
the extensions all that often.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-15-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Re rebuilding the enitre manual set being acceptable "because we
don't change the extensions all that often": we also rebuild it when
the QAPI generator code the qapidoc extension depends on changes.
This will inconvenience QAPI developers. Can't be helped now.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We're going to want to use SPHINX_ARGS in both docs/meson.build
and tests/qapi-schema/meson.build. Move the definition up to the
top level file so it is available to both subdirectories.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-14-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
doc-good.json currently uses the old *strong* and _emphasis_ markup.
As part of the conversion to rST this needs to switch to **strong**
and *emphasis*, because rST uses underscores as part of its markup
of hyperlinks and will otherwise warn about the syntax error.
In commit a660eed482 we fixed up the in-tree uses of the
old markup:
1) _this_ was replaced with *this*
2) the only in-tree use of *this* was left alone (turning
a 'strong' into an 'emphasis')
(and so currently in-tree nothing is using either new-style
**strong** or old-style _emphasis_).
Update doc-good.json in a similar way:
1) replace _this_ with *this*
2) remove the usage of old-style *this*
(This slightly reduces the coverage for the old Texinfo generator,
which is about to go away, but is fine for the new rST generator
because that does not need to handle strong/emphasis itself because
it is simply passing the entire text as raw rST to Sphinx.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-13-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add some section headings to the QGA json; this is purely so that we
have some H1 headings, as otherwise each command ends up being
visible in the interop/ manual's table of contents. In an ideal
world there might be a proper 'Introduction' section the way there is
in qapi/qapi-schema.json.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-12-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There are exactly two places in our json doc comments where we
use the markup accepted by the texi doc generator where a '|' in
the first line of a doc comment means the line should be emitted
as a literal block (fixed-width font, whitespace preserved).
Since we use this syntax so rarely, instead of making the rST
generator support it, instead just convert the two uses to
rST-format literal blocks, which are indented and introduced
with '::'.
(The rST generator doesn't complain about the old style syntax,
it just emits it with the '|' and with the whitespace not
preserved, which looks odd, but means we can safely leave this
change until after we've stopped generating texinfo.)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-11-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Convert qemu-qmp-ref to rST format. This includes dropping
the plain-text, pdf and info format outputs for this document;
as with all our other Sphinx-based documentation, we provide
HTML and manpage only.
The qemu-qmp-ref.rst is somewhat more stripped down than
the .texi was, because we do not (currently) attempt to
generate indexes for the commands, events and data types
being documented.
Again, we drop the direct link from index.html.in now that
the QMP ref is part of the interop manual.
This commit removes the code from the root meson.build file that
handled the various Texinfo-based outputs, because we no longer
generate any documentation except for the Sphinx HTML manuals and the
manpages, and the code can't handle having an empty list of files
to process.. We'll do further cleanup of the remainders of
Texinfo support in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-10-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unicode legacy literal dumbed down to plain string literal, TODO
comment on displaying QEMU version added, "make html" fixed,
storage-daemon/qapi/meson.build updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Convert qemu-ga-ref to rST format. This includes dropping
the plain-text, pdf and info format outputs for this document;
as with all our other Sphinx-based documentation, we provide
HTML and manpage only.
The qemu-ga-ref.rst is somewhat more stripped down than
the .texi was, because we do not (currently) attempt to
generate indexes for the commands, events and data types
being documented.
As the GA ref is now part of the Sphinx 'interop' manual,
we can delete the direct link from index.html.in.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-9-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unicode legacy literal dumbed down to plain string literal, TODO
comment on displaying QEMU version added]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some of our documentation is auto-generated from documentation
comments in the JSON schema.
For Sphinx, rather than creating a file to include, the most natural
way to handle this is to have a small custom Sphinx extension which
processes the JSON file and inserts documentation into the rST
file being processed.
This is the same approach that kerneldoc and hxtool use.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-8-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Comment and doc string formatting tweaked, unused method dropped,
a few line breaks tweaked to follow PEP 8 more closely, MAINTAINERS
section QAPI updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For rST, '*' is a kind of inline markup (for emphasis), so
"*-softmmu" is a syntax error because of the missing closing '*'.
Escape the '*' with a '\'.
The texinfo document generator will leave the '\' in the
output, which is not ideal, but that generator is going to
go away in a subsequent commit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-7-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make the handling of indentation in doc comments more sophisticated,
so that when we see a section like:
Notes: some text
some more text
indented line 3
we save it for the doc-comment processing code as:
some text
some more text
indented line 3
and when we see a section with the heading on its own line:
Notes:
some text
some more text
indented text
we also accept that and save it in the same form.
If we detect that the comment document text is not indented as much
as we expect it to be, we throw a parse error. (We don't complain
about over-indented sections, because for rST this can be legitimate
markup.)
The golden reference for the doc comment text is updated to remove
the two 'wrong' indents; these now form a test case that we correctly
stripped leading whitespace from an indented multi-line argument
definition.
We update the documentation in docs/devel/qapi-code-gen.txt to
describe the new indentation rules.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-6-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Whitespace between sentences tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
As we accumulate lines from doc comments when parsing the JSON, the
QAPIDoc class generally strips leading and trailing whitespace using
line.strip() when it calls _append_freeform(). This is fine for
Texinfo, but for rST leading whitespace is significant. We'd like to
move to having the text in doc comments be rST format rather than a
custom syntax, so move the removal of leading whitespace from the
QAPIDoc class to the texinfo-specific processing code in
texi_format() in qapi/doc.py.
(Trailing whitespace will always be stripped by the rstrip() in
Section::append regardless.)
In a followup commit we will make the whitespace in the lines of doc
comment sections more consistently follow the input source.
There is no change to the generated .texi files before and after this
commit.
Because the qapi-schema test checks the exact values of the
documentation comments against a reference, we need to update that
reference to match the new whitespace. In the first four places this
is now correctly checking that we did put in the amount of whitespace
to pass a rST-formatted list to the backend; in the last two places
the extra whitespace is 'wrong' and will go away again in the
following commit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-5-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
doc-good.json tests doc comment parser corner cases. We're about to
largely replace it by a Sphinx extension, which will have different
corner cases. Tweak the test so it passes both with the old parser
and the Sphinx extension, by making it match the more restrictive
rST syntax:
* in a single list the bullet types must all match
* lists must have leading and following blank lines
* the rules on when and where indentation matters differ
* the '|' example syntax is going to go away entirely, so stop
testing it
This will avoid the tests spuriously breaking when we tighten up the
parser code in the following commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-4-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The block-latency-histogram-set command is the only one which uses
the Example/Examples section with the first line of the documentation
immediately following the ':'. Bring it into line with the rest.
This will allow us to avoid special-casing the indentation handling
for "Examples" sections; instead for Examples as for any other section
header these two indentations will be equivalent:
Examples:
Line one
Line two
Examples: Line one
Line two
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-3-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In commit 26ec4e53f2 and similar commits we fixed the indentation
for doc comments in our qapi json files to follow a new stricter
standard for indentation, which permits only:
@arg: description line 1
description line 2
or:
@arg:
line 1
line 2
but because the script updates that enforce this are not yet in the
tree we have had a steady trickle of subsequent changes which didn't
follow the new rules.
Fix the latest round of mis-indented doc comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-2-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Updated for commit 4c437254b8 and a83e24ba1a]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Extracting the PCI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-9-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Extracting the ACPI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-8-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Restricting the memory commands to machine.json pulls less
QAPI-generated code into user-mode.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-7-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Restricting the query-uuid command to machine.json pulls less
QAPI-generated code into user-mode.
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-6-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Restricting the query-vm-generation-id command to machine.json pulls
less QAPI-generated code into user-mode.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-5-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Restricting the balloon-related commands to machine.json pulls less
QAPI-generated code into user-mode.
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-4-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The documentation incorrectly uses the "size of the balloon"
description when it should be "logical size of the VM". Fix it.
The relation between both values is:
logical_vm_size = vm_ram_size - balloon_size
Reported-by: David Hildenbrand <david@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-3-philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Restricting LostTickPolicy to machine.json pulls slightly less
QAPI-generated code into user-mode.
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-2-philmd@redhat.com>
[Add rationale to commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
My last pull included a ton of useless files by mistake.
Drop them all.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl9zFpQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpzlcIAKyBEfVbVhY0AsLbWn/tqL+fPhOTaioEaMX2
7beMIjK0vhmVDOhWtiSLZKbIVd1TMQu8jX2Gxuf1NJo5xIr3hJvEzT/FlpRR8m6u
TyNDWKmOGyUuOG1GYA6/KoQNDdlrabpzT1xVW1aQJ3tlOrUwqf+UJKvsu1JjkO27
ALu8j/MkJomxLuMEd4PhM34Sc6PuDlMKaSpxlRW6bKnviPTjV8tqXrW6ZHAYfWra
xrY0wApR2Wn0n3CWXHlZP/jk40xupV1zuyHzAb5vOrWSdh2VqKUGsxOv+wZLNmlW
qhWo9r6TNXv9BKYNXxLo8Skroncrkpym7s4drpWF1O1wPDG6DrI=
=rAKt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi: fixup
My last pull included a ton of useless files by mistake.
Drop them all.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 29 Sep 2020 12:12:20 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
tests/acpi: drop unnecessary files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The last pull added a ton of useless files by mistake.
Drop them all.
Fixes: 0ed93f4c05 ("update golden master DSDT binary table blobs for q35")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes and tests all over the place.
Batch iommu updates for vdpa.
Removal of deprecated cpu hotplug commands.
SMBIOS OEM string support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl9y3aEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpIgIH/2jGMi7hJ4CEs36pNdxaTfaTsX9IzlTv3/jb
ZuC3VV1PAdXyg0Z29QG0dzCkngN+D5ikC2KrBwUibKqBq6PqYie0dZYUYM5aEr/D
0v+afBBJkLtyOonLe3cG36D3cy7BeGpzXnNhm5muSl0+zaRutreWULMlF6sTmtMh
Vc/bp06IWdgj5eCp8cNzHItuzHtzXIrLsNuO2UDFPg/LFPl0gEcqXFDCB/9N6AfV
4D4XIXtWRd3umzQci0JNQUDDq5NTWnWaZDrK+6jeAhMfYFCYMxZqyT2AsEn636wm
H7klBm2Zs6gcLUX6on4RtALKyWAxRMWQenaJ4tjIB9QO2+7LsaE=
=3BXA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,acpi: fixes, tests
Fixes and tests all over the place.
Batch iommu updates for vdpa.
Removal of deprecated cpu hotplug commands.
SMBIOS OEM string support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 29 Sep 2020 08:09:21 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (48 commits)
libvhost-user: return on error in vu_log_queue_fill()
libvhost-user: return early on virtqueue errors
hw: virtio-pmem: detach the element fromt the virtqueue when error occurs
tests/acpi: update golden master DSDT binary table blobs for q35
piix4: don't reserve hw resources when hotplug is off globally
Add ACPI DSDT tables for q35 that are being updated by the next patch
tests/acpi: add newly added acpi DSDT table blob for pci bridge hotplug flag
tests/acpi: unit test for 'acpi-pci-hotplug-with-bridge-support' bridge flag
tests/acpi: list added acpi table binary file for pci bridge hotplug test
i440fx/acpi: do not add hotplug related amls for cold plugged bridges
Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable bus
tests/acpi: add a new ACPI table in order to test root pci hotplug on/off
tests/acpi: add new unit test to test hotplug off/on feature on the root pci bus
tests/acpi: mark addition of table DSDT.roothp for unit testing root pci hotplug
vhost-user: save features of multiqueues if chardev is closed
qemu-options: document SMBIOS type 11 settings
hw/smbios: report error if table size is too large
hw/smbios: support loading OEM strings values from a file
tests: acpi: update acpi blobs with new AML
x68: acpi: trigger SMI before sending hotplug Notify event to OSPM
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One patch in the last pull broke test 068 which
does a pair of vmload's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eW0Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200928a' into staging
Migration: Revert one patch for 068 fix
One patch in the last pull broke test 068 which
does a pair of vmload's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 28 Sep 2020 16:19:17 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20200928a:
Revert "migration: Properly destroy variables on incoming side"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allows to switch the (vga mode) framebuffer into bigendian mode
by setting the property, simliar to stdvga.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200928085335.21961-2-kraxel@redhat.com
With upcoming Spice server version 0.14.4, the monitor configuration can
contain additional fields for the monitor physical dimensions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduced in commit 9c956e6461 ("spice:
prepare for upcoming spice-server change"), the new logic never
materialized in the spice server source tree. Let's remove it for now,
until it actually changes in Spice.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-5-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The following patch is going to introduce extra fields / details to
UIInfo. Add a getter and keep the current values, instead of memset(0)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace dpi with width_mm/height_mm in qemu_edid_info.
Use it when set (non-zero) to compute the DPI and generate the EDID.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
