Since the virtio memory device stubs are needed exactly when the
Kconfig symbol is not enabled, they can be placed in hw/virtio/ and
conditionalized on CONFIG_VIRTIO_MD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A last minute fix for a use of a vector after it's released.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmYdBssPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpTHcH/Rtl2jNJ5myZOuEylw+T6/GSvyEne6CoreHK
zUNPxmXY+uJzCskXkJXyd4uIaci5iIH1JC9Tc0FzFYaYrTsoA1dlQridqoajKyN5
E6zjKqepi3sLnvDE1VbZ1kVcNEX2xSAFX++iv4Rbn4HHO49yKR0jNajusTOsq505
NObgNQXK/Yj1q0IXYrWDETV7xywpQqiiAzwnmhi6ac72+trqmPrUXnUulhitWR3K
iZBuGxAHn9c/ilW3J4FeSbqe6sC/AhqUz3RSM6dB+rkpvA0E675T526uVMWxND2H
auE+ou0kzZ8HNit3AHBg8316seHXzWP+ndVEZlifX33HoR1pltY=
=H3M5
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: bugfix
A last minute fix for a use of a vector after it's released.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmYdBssPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpTHcH/Rtl2jNJ5myZOuEylw+T6/GSvyEne6CoreHK
# zUNPxmXY+uJzCskXkJXyd4uIaci5iIH1JC9Tc0FzFYaYrTsoA1dlQridqoajKyN5
# E6zjKqepi3sLnvDE1VbZ1kVcNEX2xSAFX++iv4Rbn4HHO49yKR0jNajusTOsq505
# NObgNQXK/Yj1q0IXYrWDETV7xywpQqiiAzwnmhi6ac72+trqmPrUXnUulhitWR3K
# iZBuGxAHn9c/ilW3J4FeSbqe6sC/AhqUz3RSM6dB+rkpvA0E675T526uVMWxND2H
# auE+ou0kzZ8HNit3AHBg8316seHXzWP+ndVEZlifX33HoR1pltY=
# =H3M5
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 Apr 2024 11:51:55 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
virtio-pci: fix use of a released vector
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During the booting process of the non-standard image, the behavior of the
called function in qemu is as follows:
1. vhost_net_stop() was triggered by guest image. This will call the function
virtio_pci_set_guest_notifiers() with assgin= false,
virtio_pci_set_guest_notifiers(） will release the irqfd for vector 0
2. virtio_reset() was triggered, this will set configure vector to VIRTIO_NO_VECTOR
3.vhost_net_start() was called (at this time, the configure vector is
still VIRTIO_NO_VECTOR) and then call virtio_pci_set_guest_notifiers() with
assgin=true, so the irqfd for vector 0 is still not "init" during this process
4. The system continues to boot and sets the vector back to 0. After that
msix_fire_vector_notifier() was triggered to unmask the vector 0 and meet the crash
To fix the issue, we need to support changing the vector after VIRTIO_CONFIG_S_DRIVER_OK is set.
(gdb) bt
0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0)
at pthread_kill.c:44
1 0x00007fc87148ec53 in __pthread_kill_internal (signo=6, threadid=<optimized out>) at pthread_kill.c:78
2 0x00007fc87143e956 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26
3 0x00007fc8714287f4 in __GI_abort () at abort.c:79
4 0x00007fc87142871b in __assert_fail_base
(fmt=0x7fc8715bbde0 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=0x5606413efd53 "ret == 0", file=0x5606413ef87d "../accel/kvm/kvm-all.c", line=1837, function=<optimized out>) at assert.c:92
5 0x00007fc871437536 in __GI___assert_fail
(assertion=0x5606413efd53 "ret == 0", file=0x5606413ef87d "../accel/kvm/kvm-all.c", line=1837, function=0x5606413f06f0 <__PRETTY_FUNCTION__.19> "kvm_irqchip_commit_routes") at assert.c:101
6 0x0000560640f884b5 in kvm_irqchip_commit_routes (s=0x560642cae1f0) at ../accel/kvm/kvm-all.c:1837
7 0x0000560640c98f8e in virtio_pci_one_vector_unmask
(proxy=0x560643c65f00, queue_no=4294967295, vector=0, msg=..., n=0x560643c6e4c8)
at ../hw/virtio/virtio-pci.c:1005
8 0x0000560640c99201 in virtio_pci_vector_unmask (dev=0x560643c65f00, vector=0, msg=...)
at ../hw/virtio/virtio-pci.c:1070
9 0x0000560640bc402e in msix_fire_vector_notifier (dev=0x560643c65f00, vector=0, is_masked=false)
at ../hw/pci/msix.c:120
10 0x0000560640bc40f1 in msix_handle_mask_update (dev=0x560643c65f00, vector=0, was_masked=true)
at ../hw/pci/msix.c:140
11 0x0000560640bc4503 in msix_table_mmio_write (opaque=0x560643c65f00, addr=12, val=0, size=4)
at ../hw/pci/msix.c:231
12 0x0000560640f26d83 in memory_region_write_accessor
(mr=0x560643c66540, addr=12, value=0x7fc86b7bc628, size=4, shift=0, mask=4294967295, attrs=...)
at ../system/memory.c:497
13 0x0000560640f270a6 in access_with_adjusted_size
(addr=12, value=0x7fc86b7bc628, size=4, access_size_min=1, access_size_max=4, access_fn=0x560640f26c8d <memory_region_write_accessor>, mr=0x560643c66540, attrs=...) at ../system/memory.c:573
14 0x0000560640f2a2b5 in memory_region_dispatch_write (mr=0x560643c66540, addr=12, data=0, op=MO_32, attrs=...)
at ../system/memory.c:1521
15 0x0000560640f37bac in flatview_write_continue
(fv=0x7fc65805e0b0, addr=4273803276, attrs=..., ptr=0x7fc871e9c028, len=4, addr1=12, l=4, mr=0x560643c66540)
at ../system/physmem.c:2714
16 0x0000560640f37d0f in flatview_write
(fv=0x7fc65805e0b0, addr=4273803276, attrs=..., buf=0x7fc871e9c028, len=4) at ../system/physmem.c:2756
17 0x0000560640f380bf in address_space_write
(as=0x560642161ae0 <address_space_memory>, addr=4273803276, attrs=..., buf=0x7fc871e9c028, len=4)
at ../system/physmem.c:2863
18 0x0000560640f3812c in address_space_rw
(as=0x560642161ae0 <address_space_memory>, addr=4273803276, attrs=..., buf=0x7fc871e9c028, len=4, is_write=true) at ../system/physmem.c:2873
--Type <RET> for more, q to quit, c to continue without paging--
19 0x0000560640f8aa55 in kvm_cpu_exec (cpu=0x560642f205e0) at ../accel/kvm/kvm-all.c:2915
20 0x0000560640f8d731 in kvm_vcpu_thread_fn (arg=0x560642f205e0) at ../accel/kvm/kvm-accel-ops.c:51
21 0x00005606411949f4 in qemu_thread_start (args=0x560642f292b0) at ../util/qemu-thread-posix.c:541
22 0x00007fc87148cdcd in start_thread (arg=<optimized out>) at pthread_create.c:442
23 0x00007fc871512630 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
(gdb)
MST: coding style and typo fixups
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-ID: <2321ade5f601367efe7380c04e3f61379c59b48f.1713173550.git.mst@redhat.com>
Cc: Lei Yang <leiyang@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Cindy Lu <lulu@redhat.com>
Replace qemu_bh_new_guarded() by virtio_bh_new_guarded()
so the bus and device use the same guard. Otherwise the
DMA-reentrancy protection can be bypassed.
Fixes: CVE-2024-3446
Cc: qemu-stable@nongnu.org
Suggested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240409105537.18308-5-philmd@linaro.org>
Introduce virtio_bh_new_guarded(), similar to qemu_bh_new_guarded()
but using the transport memory guard, instead of the device one
(there can only be one virtio device per virtio bus).
Inspired-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240409105537.18308-2-philmd@linaro.org>
The set_config callback function vhost_vdpa_device_get_config in
vdpa-dev does not fetch the current device status from the hardware
device, causing the guest os to not receive the latest device status
information.
The hardware updates the config status of the vdpa device and then
notifies the os. The guest os receives an interrupt notification,
triggering a get_config access in the kernel, which then enters qemu
internally. Ultimately, the vhost_vdpa_device_get_config function of
vdpa-dev is called
One scenario encountered is when the device needs to bring down the
vdpa net device. After modifying the status field of virtio_net_config
in the hardware, it sends an interrupt notification. However, the guest
os always receives the STATUS field as VIRTIO_NET_S_LINK_UP.
Signed-off-by: Yuxue Liu <yuxue.liu@jaguarmicro.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240408020003.1979-1-yuxue.liu@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the event of writing many chains of descriptors, the device must
write just the id of the last buffer in the descriptor chain, skip
forward the number of descriptors in the chain, and then repeat the
operations for the rest of chains.
Current QEMU code writes all the buffer ids consecutively, and then
skips all the buffers altogether. This is a bug, and can be reproduced
with a VirtIONet device with _F_MRG_RXBUB and without
_F_INDIRECT_DESC:
If a virtio-net device has the VIRTIO_NET_F_MRG_RXBUF feature
but not the VIRTIO_RING_F_INDIRECT_DESC feature,
'VirtIONetQueue->rx_vq' will use the merge feature
to store data in multiple 'elems'.
The 'num_buffers' in the virtio header indicates how many elements are merged.
If the value of 'num_buffers' is greater than 1,
all the merged elements will be filled into the descriptor ring.
The 'idx' of the elements should be the value of 'vq->used_idx' plus 'ndescs'.
Fixes: 86044b24e8 ("virtio: basic packed virtqueue support")
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Wafer <wafer@jaguarmicro.com>
Message-Id: <20240407015451.5228-2-wafer@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit cd341fd1ff.
The patch adds non-upstream code in
include/standard-headers/linux/virtio_pci.h
which would make maintainance harder.
Revert for now.
Suggested-by: Jason Wang <jasowang@redhat.com>
Message-Id: <df6b6b465753e754a19459e8cd61416548f89a42.1712569644.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VDUSE requires that virtqueues are first enabled before the DRIVER_OK
status flag is set; with the current API of the kernel module, it is
impossible to enable the opposite order in our block export code because
userspace is not notified when a virtqueue is enabled.
This requirement also mathces the normal initialisation order as done by
the generic vhost code in QEMU. However, commit 6c482547 accidentally
changed the order for vdpa-dev and broke access to VDUSE devices with
this.
This changes vdpa-dev to use the normal order again and use the standard
vhost callback .vhost_set_vring_enable for this. VDUSE devices can be
used with vdpa-dev again after this fix.
vhost_net intentionally avoided enabling the vrings for vdpa and does
this manually later while it does enable them for other vhost backends.
Reflect this in the vhost_net code and return early for vdpa, so that
the behaviour doesn't change for this device.
Cc: qemu-stable@nongnu.org
Fixes: 6c4825476a ('vdpa: move vhost_vdpa_set_vring_ready to the caller')
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240315155949.86066-1-kwolf@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
+jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
=C0UU
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
# 1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
# +jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
# uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
# 0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
# 6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
# =C0UU
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 22:03:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (68 commits)
docs/specs/pvpanic: document shutdown event
hw/cxl: Fix missing reserved data in CXL Device DVSEC
hmat acpi: Fix out of bounds access due to missing use of indirection
hmat acpi: Do not add Memory Proximity Domain Attributes Structure targetting non existent memory.
qemu-options.hx: Document the virtio-iommu-pci aw-bits option
hw/arm/virt: Set virtio-iommu aw-bits default value to 48
hw/i386/q35: Set virtio-iommu aw-bits default value to 39
virtio-iommu: Add an option to define the input range width
virtio-iommu: Trace domain range limits as unsigned int
qemu-options.hx: Document the virtio-iommu-pci granule option
virtio-iommu: Change the default granule to the host page size
virtio-iommu: Add a granule property
hw/i386/acpi-build: Add support for SRAT Generic Initiator structures
hw/acpi: Implement the SRAT GI affinity structure
qom: new object to associate device to NUMA node
hw/i386/pc: Inline pc_cmos_init() into pc_cmos_init_late() and remove it
hw/i386/pc: Set "normal" boot device order in pc_basic_device_init()
hw/i386/pc: Avoid one use of the current_machine global
hw/i386/pc: Remove "rtc_state" link again
Revert "hw/i386/pc: Confine system flash handling to pc_sysfw"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/core/machine.c
aw-bits is a new option that allows to set the bit width of
the input address range. This value will be used as a default for
the device config input_range.end. By default it is set to 64 bits
which is the current value.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240307134445.92296-7-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use %u format to trace domain_range limits.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240307134445.92296-6-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to set the default granule to 4KB but with VFIO assignment
it makes more sense to use the actual host page size.
Indeed when hotplugging a VFIO device protected by a virtio-iommu
on a 64kB/64kB host/guest config, we current get a qemu crash:
"vfio: DMA mapping failed, unable to continue"
This is due to the hot-attached VFIO device calling
memory_region_iommu_set_page_size_mask() with 64kB granule
whereas the virtio-iommu granule was already frozen to 4KB on
machine init done.
Set the granule property to "host" and introduce a new compat.
The page size mask used before 9.0 was qemu_target_page_mask().
Since the virtio-iommu currently only supports x86_64 and aarch64,
this matched a 4KB granule.
Note that the new default will prevent 4kB guest on 64kB host
because the granule will be set to 64kB which would be larger
than the guest page size. In that situation, the virtio-iommu
driver fails on viommu_domain_finalise() with
"granule 0x10000 larger than system page size 0x1000".
In that case the workaround is to request 4K granule.
The current limitation of global granule in the virtio-iommu
should be removed and turned into per domain granule. But
until we get this upgraded, this new default is probably
better because I don't think anyone is currently interested in
running a 4KB page size guest with virtio-iommu on a 64KB host.
However supporting 64kB guest on 64kB host with virtio-iommu and
VFIO looks a more important feature.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240307134445.92296-4-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows to choose which granule will be used by
default by the virtio-iommu. Current page size mask
default is qemu_target_page_mask so this translates
into a 4k granule on ARM and x86_64 where virtio-iommu
is supported.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240307134445.92296-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds support for VDPA network simulation devices.
The device is developed based on virtio-net and tap backend,
and supports hardware live migration function.
For more details, please refer to "docs/system/devices/vdpa-net.rst"
Signed-off-by: Hao Chen <chenh@yusur.tech>
Message-Id: <20240221073802.2888022-1-chenh@yusur.tech>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Shared objects lack spoofing protection.
For VHOST_USER_BACKEND_SHARED_OBJECT_REMOVE messages
received by the vhost-user interface, any backend was
allowed to remove entries from the shared table just
by knowing the UUID. Only the owner of the entry
shall be allowed to removed their resources
from the table.
To fix that, add a check for all
*SHARED_OBJECT_REMOVE messages received.
A vhost device can only remove TYPE_VHOST_DEV
entries that are owned by them, otherwise skip
the removal, and inform the device that the entry
has not been removed in the answer.
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20240219143423.272012-2-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sometimes, certain parts are not being skipped in
vhost_vdpa_listener_region_del, but they are skipped in
vhost_vdpa_listener_region_add, or vice versa. The vhost-vdpa code
expects all parts to maintain their properties, so we're adding a trace
to help with debugging when any part is skipped.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240215103616.330518-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next changes uses this variables, so avoid call repeatedly to memory
region functions. No functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240215103616.330518-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix an issue where cancellation of ongoing migration ends up
with no network connectivity.
When canceling migration, SVQ will be switched back to the
passthrough mode, but the right call fd is not programed to
the device and the svq's own call fd is still used. At the
point of this transitioning period, the shadow_vqs_enabled
hadn't been set back to false yet, causing the installation
of call fd inadvertently bypassed.
Message-Id: <1707910082-10243-13-git-send-email-si-wei.liu@oracle.com>
Fixes: a8ac88585d ("vhost: Add Shadow VirtQueue call forwarding capabilities")
Cc: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For better debuggability and observability.
Message-Id: <1707910082-10243-8-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For better debuggability and observability.
Message-Id: <1707910082-10243-7-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Generalize duplicated condition check for the last vq of vdpa
device to a common function.
Message-Id: <1707910082-10243-4-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Prefer fast cpu_env() over slower CPU QOM cast macro
-----BEGIN PGP SIGNATURE-----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=NiP4
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu into staging
* Add missing ERRP_GUARD() statements in functions that need it
* Prefer fast cpu_env() over slower CPU QOM cast macro
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmXwPhYRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWHvBAAgKx5LHFjz3xREVA+LkDTQ49mz0lK3s32
# SGvNlIHjiaDGVttVYhVC4sinBWUruG4Lyv/2QN72OJBzn6WUsEUQE3KPH1d7Y3/s
# wS9X7mj70n4kugWJqeIJP5AXSRasHmWoQ4QJLVQRJd6+Eb9jqwep0x7bYkI1de6D
# bL1Q7bIfkFeNQBXaiPWAm2i+hqmT4C1r8HEAGZIjAsMFrjy/hzBEjNV+pnh6ZSq9
# Vp8BsPWRfLU2XHm4WX0o8d89WUMAfUGbVkddEl/XjIHDrUD+Zbd1HAhLyfhsmrnE
# jXIwSzm+ML1KX4MoF5ilGtg8Oo0gQDEBy9/xck6G0HCm9lIoLKlgTxK9glr2vdT8
# yxZmrM9Hder7F9hKKxmb127xgU6AmL7rYmVqsoQMNAq22D6Xr4UDpgFRXNk2/wO6
# zZZBkfZ4H4MpZXbd/KJpXvYH5mQA4IpkOy8LJdE+dbcHX7Szy9ksZdPA+Z10hqqf
# zqS13qTs3abxymy2Q/tO3hPKSJCk1+vCGUkN60Wm+9VoLWGoU43qMc7gnY/pCS7m
# 0rFKtvfwFHhokX1orK0lP/ppVzPv/5oFIeK8YDY9if+N+dU2LCwVZHIuf2/VJPRq
# wmgH2vAn3JDoRKPxTGX9ly6AMxuZaeP92qBTOPap0gDhihYzIpaCq9ecEBoTakI7
# tdFhV0iRr08=
# =NiP4
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 11:35:50 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu: (55 commits)
user: Prefer fast cpu_env() over slower CPU QOM cast macro
target/xtensa: Prefer fast cpu_env() over slower CPU QOM cast macro
target/tricore: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sparc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sh4: Prefer fast cpu_env() over slower CPU QOM cast macro
target/rx: Prefer fast cpu_env() over slower CPU QOM cast macro
target/ppc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/openrisc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/nios2: Prefer fast cpu_env() over slower CPU QOM cast macro
target/mips: Prefer fast cpu_env() over slower CPU QOM cast macro
target/microblaze: Prefer fast cpu_env() over slower CPU QOM cast macro
target/m68k: Prefer fast cpu_env() over slower CPU QOM cast macro
target/loongarch: Prefer fast cpu_env() over slower CPU QOM cast macro
target/i386/hvf: Use CPUState typedef
target/hexagon: Prefer fast cpu_env() over slower CPU QOM cast macro
target/cris: Prefer fast cpu_env() over slower CPU QOM cast macro
target/avr: Prefer fast cpu_env() over slower CPU QOM cast macro
target/alpha: Prefer fast cpu_env() over slower CPU QOM cast macro
target: Replace CPU_GET_CLASS(cpu -> obj) in cpu_reset_hold() handler
bulk: Call in place single use cpu_env()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a variable is initialized to &struct->field, use it
in place. Rationale: while this makes the code more concise,
this also helps static analyzers.
Mechanical change using the following Coccinelle spatch script:
@@
type S, F;
identifier s, m, v;
@@
S *s;
...
F *v = &s->m;
<+...
- &s->m
+ v
...+>
Inspired-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-2-philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[thuth: Dropped hunks that need a rebase, and fixed sizeof() in pmu_realize()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In hw/virtio/vhost.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- vhost_save_backend_state()
- vhost_load_backend_state()
Their @errp both points to callers' @local_err. However, as the APIs
defined in include/hw/virtio/vhost.h, it is necessary to protect their
@errp with ERRP_GUARD().
To follow the requirement of @errp, add missing ERRP_GUARD() at their
beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-27-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vhost_vsock_device_realize() passes @errp to error_prepend(), and as
a VirtioDeviceClass.realize method, its @errp is from
DeviceClass.realize so that there is no guarantee that the @errp won't
point to @error_fatal.
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-26-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A small number of migration options are accessed by migration clients,
but to see them clients must include all of options.h, which is mostly
for migration core code. migrate_mode() in particular will be needed by
multiple clients.
Refactor the option declarations so clients can see the necessary few via
misc.h, which already exports a portion of the client API.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Link: https://lore.kernel.org/r/1710179319-294320-1-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Remove the error object from opaque data passed to notifiers.
Use the new error parameter passed to the notifier instead.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Pass an error object as the third parameter to "notifier with return"
notifiers, so clients no longer need to bundle an error object in the
opaque data. The new parameter is used in a later patch.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-2-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
s->iommu_pcibus_by_bus_num is a IOMMUPciBus pointer cache indexed
by bus number, bus number may not always be a fixed value,
i.e., guest reboot to different kernel which set bus number with
different algorithm.
This could lead to endpoint binding to wrong iommu MR in
virtio_iommu_get_endpoint(), then vfio device setup wrong
mapping from other device.
Remove the memset in virtio_iommu_device_realize() to avoid
redundancy with memset in system reset.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240125073706.339369-2-zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch derives vhost-user-input from vhost-user-base class, so make
the input stub as a simpler boilerplate wrapper.
With the refactoring, vhost-user-input adds the property 'chardev', this
leads to conflict with the vhost-user-input-pci adds the same property.
To resolve the error, remove the duplicate property from
vhost-user-input-pci.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231120043721.50555-5-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user-input is in the input folder. On the other hand, the folder
'hw/virtio' maintains other virtio stubs (e.g. I2C, RNG, GPIO, etc).
This patch moves vhost-user-input into the virtio folder for better code
organization. No functionality change.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231120043721.50555-4-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Virtio input device invokes set_config() callback for retrieving
the event configuration info, but the callback is not supported in
vhost-user-base.
This patch adds support set_config() callback in vhost-user-base.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231120043721.50555-2-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-9-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can take advantage of the new base class and make
vhost-user-i2c a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-6-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now the new base class supports config handling we can take advantage
and make vhost-user-gpio a much simpler boilerplate wrapper. Also as
this doesn't require any target specific hacks we only need to build
the stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-5-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can take advantage of our new base class and make
vhost-user-rng a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are about to convert at least one stubs which was using the async
teardown so lets use it for all the cases.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-3-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lets keep a cleaner split between the base class and the derived
vhost-user-device which we can use for generic vhost-user stubs. This
includes an update to introduce the vq_size property so the number of
entries in a virtq can be defined.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During drain, we do not care about virtqueue notifications, which is why
we remove the handlers on it. When removing those handlers, whether vq
notifications are enabled or not depends on whether we were in polling
mode or not; if not, they are enabled (by default); if so, they have
been disabled by the io_poll_start callback.
Because we do not care about those notifications after removing the
handlers, this is fine. However, we have to explicitly ensure they are
enabled when re-attaching the handlers, so we will resume receiving
notifications. We do this in virtio_queue_aio_attach_host_notifier*().
If such a function is called while we are in a polling section,
attaching the notifiers will then invoke the io_poll_start callback,
re-disabling notifications.
Because we will always miss virtqueue updates in the drained section, we
also need to poll the virtqueue once after attaching the notifiers.
Buglink: https://issues.redhat.com/browse/RHEL-3934
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202153158.788922-3-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU initializes preallocated backend memory as the objects are parsed from
the command line. This is not optimal in some cases (e.g. memory spanning
multiple NUMA nodes) because the memory objects are initialized in series.
Allow the initialization to occur in parallel (asynchronously). In order to
ensure optimal thread placement, asynchronous initialization requires prealloc
context threads to be in use.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Message-ID: <20240131165327.3154970-2-mark.kanda@oracle.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git acpi include/hw/*/*acpi.h hw/*/*acpi.c
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
RISC-V also needs to create the virtio in DSDT in the same way as ARM.
So, instead of duplicating the code, move this function to the device
specific file which is common across architectures.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-3-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since qemu_prealloc_mem() returns whether or not an error
occured, we don't need to check the @errp pointer. Remove
local_err uses when we can return directly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-20-philmd@linaro.org>
CONFIG_ALL is tricky to use and was ported over to Meson from the
recursive processing of Makefile variables. Meson sourcesets
however have all_sources() and all_dependencies() methods that
remove the need for it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the memory listener to a common place rather than always in the
first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-14-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
