Like -set and -readconfig, it would not really be too hard to
extend -writeconfig to parsing mechanisms other than QemuOpts.
However, the uses of -writeconfig are substantially more
limited, as it is generally easier to write the configuration
by hand in the first place. In addition, -writeconfig does
not even try to detect cases where it prints incorrect
syntax (for example if values have a quote in them, since
qemu_config_parse does not support any kind of escaping.
Just remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414145721.326866-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move sev firmware setup to separate function so it can be used from
other code paths. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220425135051.551037-3-kraxel@redhat.com>
Add possibility to change addresses where VNC server listens for new
connections. Prior to 6.0 this functionality was available through
'change' qmp command which was deleted.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220401143936.356460-3-vsementsov@openvz.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- Paolo Bonzini: thread-safety improvements to NBD client
- Vladimir Sementsov-Ogievsky: finer-grained selection of bitmaps during
nbd-export
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmJoUhAACgkQp6FrSiUn
Q2qnpgf/YCuONdwAndjEo7he5c1BfB/F2sujQJJ00CebUqnz5OFKQ85RwLC8DCGB
rXnxqC/NF4yyYM+6uYWDpggDd0bJVKbfG7NE/AZsEZrK+n9xMkvGLRwGqMugUii+
Px4Ba98++0giqGoAI8pU/wQZNh1I6uGabv/DPRTpwzBjbfAcATqV09OzaGiK3SRC
Zm/55zmXm1zM4XSUtUzN1gILPG09P+51m6NVkANZbzps9e2PtfFy8EsWc5+YhuBM
5K7sN+5g8GpRhz6j8RkrhrbNpvg3bGvgRJRMcW7Bo8KVUdvT1Jng6xs8CIRv39AF
jDJwGe+cq5p5PNuyqOrVSA/ynBZxBw==
=I1yM
-----END PGP SIGNATURE-----
Merge tag 'pull-nbd-2022-04-26' of https://repo.or.cz/qemu/ericb into staging
nbd patches for 2022-04-26
- Paolo Bonzini: thread-safety improvements to NBD client
- Vladimir Sementsov-Ogievsky: finer-grained selection of bitmaps during
nbd-export
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmJoUhAACgkQp6FrSiUn
# Q2qnpgf/YCuONdwAndjEo7he5c1BfB/F2sujQJJ00CebUqnz5OFKQ85RwLC8DCGB
# rXnxqC/NF4yyYM+6uYWDpggDd0bJVKbfG7NE/AZsEZrK+n9xMkvGLRwGqMugUii+
# Px4Ba98++0giqGoAI8pU/wQZNh1I6uGabv/DPRTpwzBjbfAcATqV09OzaGiK3SRC
# Zm/55zmXm1zM4XSUtUzN1gILPG09P+51m6NVkANZbzps9e2PtfFy8EsWc5+YhuBM
# 5K7sN+5g8GpRhz6j8RkrhrbNpvg3bGvgRJRMcW7Bo8KVUdvT1Jng6xs8CIRv39AF
# jDJwGe+cq5p5PNuyqOrVSA/ynBZxBw==
# =I1yM
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Apr 2022 01:12:00 PM PDT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
* tag 'pull-nbd-2022-04-26' of https://repo.or.cz/qemu/ericb:
nbd: document what is protected by the CoMutexes
nbd: take receive_mutex when reading requests[].receiving
nbd: move s->state under requests_lock
nbd: code motion and function renaming
nbd: use a QemuMutex to synchronize yanking, reconnection and coroutines
nbd: keep send_mutex/free_sema handling outside nbd_co_do_establish_connection
nbd: remove peppering of nbd_client_connected
nbd: mark more coroutine_fns
nbd: safeguard against waking up invalid coroutine
iotests/223: check new possibility of exporting bitmaps by node/name
qapi: nbd-export: allow select bitmaps by node/name pair
qapi: rename BlockDirtyBitmapMergeSource to BlockDirtyBitmapOrStr
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename the type to be reused. Old name is "what is it for". To be
natively reused for other needs, let's name it exactly "what is it".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-Id: <20220314213226.362217-2-v.sementsov-og@mail.ru>
[eblake: Adjust S-o-b to Vladimir's new email, with permission]
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Implement nios2 Vectored Interrupt Controller (VIC).
VIC is connected to EIC. It needs to update rha, ril, rrs and rnmi
fields on Nios2CPU before raising an IRQ.
For that purpose, VIC has a "cpu" property which should refer to the
nios2 cpu and set by the board that connects VIC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Amir Gonnen <amir.gonnen@neuroblade.ai>
Message-Id: <20220303153906.2024748-5-amir.gonnen@neuroblade.ai>
[rth: Split out nios2_vic.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-60-richard.henderson@linaro.org>
Users requiring FIPS support must build QEMU with either the libgcrypt
or gnutls libraries as the crytography backend.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for the TCG GICv4 to the virt board. For the board,
the GICv4 is very similar to the GICv3, with the only difference
being the size of the redistributor frame. The changes here are thus:
* calculating virt_redist_capacity correctly for GICv4
* changing various places which were "if GICv3" to be "if not GICv2"
* the commandline option handling
Note that using GICv4 reduces the maximum possible number of CPUs on
the virt board from 512 to 317, because we can now only fit half as
many redistributors into the redistributor regions we have defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-42-peter.maydell@linaro.org
In several places in virt.c we calculate the number of redistributors that
fit in a region of our memory map, which is the size of the region
divided by the size of a single redistributor frame. For GICv4, the
redistributor frame is a different size from that for GICv3. Abstract
out the calculation of redistributor region capacity so that we have
one place we need to change to handle GICv4 rather than several.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-41-peter.maydell@linaro.org
The CPU interface changes to support vLPIs are fairly minor:
in the parts of the code that currently look at the list registers
to determine the highest priority pending virtual interrupt, we
must also look at the highest priority pending vLPI. To do this
we change hppvi_index() to check the vLPI and return a special-case
value if that is the right virtual interrupt to take. The callsites
(which handle HPPIR and IAR registers and the "raise vIRQ and vFIQ
lines" code) then have to handle this special-case value.
This commit includes two interfaces with the as-yet-unwritten
redistributor code:
* the new GICv3CPUState::hppvlpi will be set by the redistributor
(in the same way as the existing hpplpi does for physical LPIs)
* when the CPU interface acknowledges a vLPI it needs to set it
to non-pending; the new gicv3_redist_vlpi_pending() function
(which matches the existing gicv3_redist_lpi_pending() used
for physical LPIs) is a stub that will be filled in later
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-26-peter.maydell@linaro.org
Implement the new GICv4 redistributor registers: GICR_VPROPBASER
and GICR_VPENDBASER; for the moment we implement these as simple
reads-as-written stubs, together with the necessary migration
and reset handling.
We don't put ID-register checks on the handling of these registers,
because they are all in the only-in-v4 extra register frames, so
they're not accessible in a GICv3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-24-peter.maydell@linaro.org
The GICv4 extends the redistributor register map -- where GICv3
had two 64KB frames per CPU, GICv4 has four frames. Add support
for the extra frame by using a new gicv3_redist_size() function
in the places in the GIC implementation which currently use
a fixed constant size for the redistributor register block.
(Until we implement the extra registers they will RAZ/WI.)
Any board that wants to use a GICv4 will need to also adjust
to handle the different sized redistributor register block;
that will be done separately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-23-peter.maydell@linaro.org
Implement the GICv4 VMOVP command, which updates an entry in the vPE
table to change its rdbase field. This command is unique in the ITS
command set because its effects must be propagated to all the other
ITSes connected to the same GIC as the ITS which executes the VMOVP
command.
The GICv4 spec allows two implementation choices for handling the
propagation to other ITSes:
* If GITS_TYPER.VMOVP is 1, the guest only needs to issue the command
on one ITS, and the implementation handles the propagation to
all ITSes
* If GITS_TYPER.VMOVP is 0, the guest must issue the command on
every ITS, and arrange for the ITSes to synchronize the updates
with each other by setting ITSList and Sequence Number fields
in the command packets
We choose the GITS_TYPER.VMOVP = 1 approach, and synchronously
execute the update on every ITS.
For GICv4.1 this command has extra fields in the command packet and
additional behaviour. We define the 4.1-only fields with the FIELD
macro, but only implement the GICv4.0 version of the command.
Note that we don't update the reported GITS_TYPER value here;
we'll do that later in a commit which updates all the reported
feature bit and ID register values for GICv4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-17-peter.maydell@linaro.org
[PMM: Moved gicv3_foreach_its() to arm_gicv3_its_common.h,
for consistency with gicv3_add_its()]
These structures are required to produce 32-bit guest Windows Complete
Memory Dump. Add 32-bit Windows dump header, CPU context and physical
memory descriptor structures along with corresponding definitions.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220406171558.199263-4-viktor.prutyanov@redhat.com>
Context structure in 64-bit Windows differs from 32-bit one and it
should be reflected in its name.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220406171558.199263-2-viktor.prutyanov@redhat.com>
Offset calculations are easy enough to get wrong. Let's add a few
variables to make moving around elf headers and data sections easier.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330123603.107120-6-frankja@linux.ibm.com>
Let's move from a boolean to a int variable which will later enable us
to store the number of sections that are in the dump file.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220330123603.107120-4-frankja@linux.ibm.com>
There's no need to have phdr_num and sh_info at the same time. We can
make phdr_num 32 bit and set PN_XNUM when we write the header if
phdr_num >= PN_XNUM.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220407094824.5074-1-frankja@linux.ibm.com>
The GICv4 ITS VMOVP command's semantics require it to perform the
operation on every ITS connected to the same GIC that the ITS that
received the command is attached to. This means that the GIC object
needs to keep a pointer to every ITS that is connected to it
(previously it was sufficient for the ITS to have a pointer to its
GIC).
Add a glib ptrarray to the GICv3 object which holds pointers to every
connected ITS, and make the ITS add itself to the array for the GIC
it is connected to when it is realized.
Note that currently all QEMU machine types with an ITS have exactly
one ITS in the system, so typically the length of this ptrarray will
be 1. Multiple ITSes are typically used to improve performance on
real hardware, so we wouldn't need to have more than one unless we
were modelling a real machine type that had multile ITSes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Moved gicv3_add_its() to arm_gicv3_its_common.h to avoid
compilation error building the KVM ITS]
Message-id: 20220408141550.1271295-16-peter.maydell@linaro.org
The GICv4 defines a new in-guest-memory table for the ITS: this is
the vPE table. Implement the new GITS_BASER2 register which the
guest uses to tell the ITS where the vPE table is located, including
the decode of the register fields into the TableDesc structure which
we do for the GITS_BASER<n> when the guest enables the ITS.
We guard provision of the new register with the its_feature_virtual()
function, which does a check of the GITS_TYPER.Virtual bit which
indicates presence of ITS support for virtual LPIs. Since this bit
is currently always zero, GICv4-specific features will not be
accessible to the guest yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-8-peter.maydell@linaro.org
The current riscv_load_fdt() forces fdt_load_addr to be placed at a dram address within 3GB,
but not all platforms have dram_base within 3GB.
This patch adds an exception for dram base not within 3GB,
which will place fdt at dram_end align 16MB.
riscv_setup_rom_reset_vec() also needs to be modified
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220419115945.37945-1-dylan@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This is now used by RISC-V as well. Update the comments.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421003324.1134983-7-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V privilege spec defines that mtime is exposed as a memory-mapped
machine-mode read-write register. However, as QEMU uses host monotonic
timer as timer source, this makes mtime to be read-only in RISC-V
ACLINT.
This patch makes mtime to be writable by recording the time delta value
between the mtime value to be written and the timer value at the time
mtime is written. Time delta value is then added back whenever the timer
value is retrieved.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220420080901.14655-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Adds the SPI_HOST device model for ibex. The device specification is as per
[1]. The model has been tested on opentitan with spi_host unit tests
written for TockOS.
[1] https://docs.opentitan.org/hw/ip/spi_host/doc/
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220303045426.511588-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF
* versal: Add the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem
* versal: model enough of the Clock/Reset Low-power domain (CRL) to allow control of the Cortex-R5s
* xlnx-zynqmp: Connect 4 TTC timers
* exynos4210: Refactor GIC/combiner code to stop using qemu_split_irq
* realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* hw/core/irq: remove unused 'qemu_irq_split' function
* npcm7xx: use symbolic constants for PWRON STRAP bit fields
* virt: document impact of gic-version on max CPUs
-----BEGIN PGP SIGNATURE-----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=Rke9
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF
* versal: Add the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem
* versal: model enough of the Clock/Reset Low-power domain (CRL) to allow control of the Cortex-R5s
* xlnx-zynqmp: Connect 4 TTC timers
* exynos4210: Refactor GIC/combiner code to stop using qemu_split_irq
* realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* hw/core/irq: remove unused 'qemu_irq_split' function
* npcm7xx: use symbolic constants for PWRON STRAP bit fields
* virt: document impact of gic-version on max CPUs
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJhPSUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3hAsD/4qzZK6LFL4kFH6E4z3tWIn
# ErHrfPGUt/SEfHLP+stQP/loFgkR1SNzcrIZ/HiDCB/W+IqQKuP+tHin2lMhO1tR
# KM6suUO1In2hoxfzimVta4F4GVN8ifY69qUYhaRxcBYSUpRXDNFJGsRIeT5JeUMd
# SArZUifRs7JUo25rIkg5Y+YZE37dmiA5gcuswtoLPa/UlDVqRxihLnItySmeutsc
# /Y8d/iym/ydlhvtL1OUt1KKYeg4ykrPzJCfvopsT2xgkwwB0PYci8//fa5IrRVlp
# Uw6yDssZrDIcXfVz88rdriILaszicCv8lOhTH6I74oXCatiyvi4BEzW8uGqVS8wt
# ff+AaKvGqb5t4GKKhCdpL2NzDwKBGWZHuruACs9IfvMkz62HE12Vr99qAKdQ3s93
# QnFIyUKg90mGkvKy8336zX3hnWjPH8wTASOXbNrgnt6GVLkqwy9ibug5kS+n77eJ
# BnkE5p3OfMVJ5a4o+iZbbDJKfzhNUHDSMIBbG1jRNzax1RgxOBtHFSqP5jmbpm+S
# agyr8h+Md0Tx1dwZKxdCGyvcbSZiG2WxRnci3dyT4MqYY1t1GEpOfcs1EN+CYKwG
# iuezZzJopjOFGaXQaB3OvbvCKxuroHKG61SmDmx+5OkfAxhrqe4ulwYij4jhsyhH
# t8zGzDOKLakv3li90xCX/w==
# =Rke9
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 04:16:53 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm: (31 commits)
hw/arm: Use bit fields for NPCM7XX PWRON STRAPs
hw/misc: Add PWRON STRAP bit fields in GCR module
hw/arm/virt: impact of gic-version on max CPUs
hw/core/irq: remove unused 'qemu_irq_split' function
hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
hw/arm/realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
hw/arm/exynos4210: Drop Exynos4210Irq struct
hw/arm/exynos4210: Put combiners into state struct
hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs()
hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs
hw/arm/exynos4210: Connect MCT_G0 and MCT_G1 to both combiners
hw/arm/exynos4210: Fill in irq_table[] for internal-combiner-only IRQ lines
hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs()
hw/arm/exynos4210: Delete unused macro definitions
hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c
hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct
hw/arm/exynos4210: Put external GIC into state struct
hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c
hw/arm/exynos4210: Fix code style nit in combiner_grp_to_gic_id[]
hw/arm/exynos4210: Coalesce board_irqs and irq_table
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify the function to only return the directory path. Callers are
adjusted to use the GLib function to build paths, g_build_filename().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-39-marcandre.lureau@redhat.com>
The function is specific to qemu-ga, no need to share it in QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220420132624.2439741-32-marcandre.lureau@redhat.com>
Since it depends on monitor code, and error_vprintf_unless_qmp() is
already there.
This will help to move error-report in a common subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-31-marcandre.lureau@redhat.com>
Simplify a bit pre-compiler conditions.
For TSAN, QEMU already has CONFIG_TSAN, but it is only set when the
fiber API is present. (I wonder whether supporting TSAN without the
fiber API is really relevant)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-27-marcandre.lureau@redhat.com>
Move them where they belong, since the functions are implemented in block-qdict.c.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-25-marcandre.lureau@redhat.com>
Do not require the whole option machinery to handle keyval, as it is
used by QAPI alone, without the option API. And match the associated
unit name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-24-marcandre.lureau@redhat.com>
Move QEMU-specific code to util/osdep.c, so cutils can become a common
subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-22-marcandre.lureau@redhat.com>
The implementation depends on the OS. (and longer-term goal is to move
cutils to a common subproject)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-21-marcandre.lureau@redhat.com>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
Move the macro and declaration so it can use glib in the following
patch (it already depends on glib anyway for !optimize)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-19-marcandre.lureau@redhat.com>
Move qemu_main() declaration to a new header.
Simplify main.c since both cocoa & sdl cannot be enabled together.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-5-marcandre.lureau@redhat.com>
Similar to the Aspeed code in include/misc/aspeed_scu.h, we define
the PWRON STRAP fields in their corresponding module for NPCM7XX.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Message-id: 20220411165842.3912945-2-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only time we use the int_combiner_irq[] and ext_combiner_irq[]
arrays in the Exynos4210Irq struct is during realize of the SoC -- we
initialize them with the input IRQs of the combiner devices, and then
connect those to outputs of other devices in
exynos4210_init_board_irqs(). Now that the combiner objects are
easily accessible as s->int_combiner and s->ext_combiner we can make
the connections directly from one device to the other without going
via these arrays.
Since these are the only two remaining elements of Exynos4210Irq,
we can remove that struct entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-19-peter.maydell@linaro.org
Switch the creation of the combiner devices to the new-style
"embedded in state struct" approach, so we can easily refer
to the object elsewhere during realize.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-18-peter.maydell@linaro.org
At this point, the function exynos4210_init_board_irqs() splits input
IRQ lines to connect them to the input combiner, output combiner and
external GIC. The function exynos4210_combiner_get_gpioin() splits
some of the combiner input lines further to connect them to multiple
different inputs on the combiner.
Because (unlike qemu_irq_split()) the TYPE_SPLIT_IRQ device has a
configurable number of outputs, we can do all this in one place, by
making exynos4210_init_board_irqs() add extra outputs to the splitter
device when it must be connected to more than one input on each
combiner.
We do this with a new data structure, the combinermap, which is an
array each of whose elements is a list of the interrupt IDs on the
combiner which must be tied together. As we loop through each
interrupt ID, if we find that it is the first one in one of these
lists, we configure the splitter device with eonugh extra outputs and
wire them up to the other interrupt IDs in the list.
Conveniently, for all the cases where this is necessary, the
lowest-numbered interrupt ID in each group is in the range of the
external combiner, so we only need to code for this in the first of
the two loops in exynos4210_init_board_irqs().
The old code in exynos4210_combiner_get_gpioin() which is being
deleted here had several problems which don't exist in the new code
in its handling of the multi-core timer interrupts:
(1) the case labels specified bits 4 ... 8, but bit '8' doesn't
exist; these should have been 4 ... 7
(2) it used the input irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]
multiple times as the input of several different splitters,
which isn't allowed
(3) in an apparent cut-and-paste error, the cases for all the
multi-core timer inputs used "bit + 4" even though the
bit range for the case was (intended to be) 4 ... 7, which
meant it was looking at non-existent bits 8 ... 11.
None of these exist in the new code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-17-peter.maydell@linaro.org
The combiner_grp_to_gic_id[] array includes the EXT_GIC_ID_MCT_G0
and EXT_GIC_ID_MCT_G1 multiple times. This means that we will
connect multiple IRQs up to the same external GIC input, which
is not permitted. We do the same thing in the code in
exynos4210_init_board_irqs() because the conditionals selecting
an irq_id in the first loop match multiple interrupt IDs.
Overall we do this for interrupt IDs
(1, 4), (12, 4), (35, 4), (51, 4), (53, 4) for EXT_GIC_ID_MCT_G0
and
(1, 5), (12, 5), (35, 5), (51, 5), (53, 5) for EXT_GIC_ID_MCT_G1
These correspond to the cases for the multi-core timer that we are
wiring up to multiple inputs on the combiner in
exynos4210_combiner_get_gpioin(). That code already deals with all
these interrupt IDs being the same input source, so we don't need to
connect the external GIC interrupt for any of them except the first
(1, 4) and (1, 5). Remove the array entries and conditionals which
were incorrectly causing us to wire up extra lines.
This bug didn't cause any visible effects, because we only connect
up a device to the "primary" ID values (1, 4) and (1, 5), so the
extra lines would never be set to a level.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-16-peter.maydell@linaro.org
