We want to use the ccw bios to start final network boot. To do
this we use ccw bios to detect if the boot device is a virtio
network device and retrieve the start address of the
network boot image.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The quiet-command make rule currently takes two arguments:
the command and arguments to run, and a string to print if
the V flag is not set (ie we are not being verbose).
By convention, the string printed is of the form
" NAME some args". Unfortunately to get nicely lined up
output all the strings have to agree about what column the
arguments should start in, which means that if we add a
new quiet-command usage which wants a slightly longer CMD
name then we either put up with misalignment or change
every quiet-command string.
Split the quiet-mode string into two, the "NAME" and
the "same args" part, and use printf(1) to format the
string automatically. This means we only need to change
one place if we want to support a longer maximum name.
In particular, we can now print 7-character names lined
up properly (they are needed for the OSX "SETTOOL" invocation).
Change all the uses of quiet-command to the new syntax.
(Any which are missed or inadvertently reintroduced
via later merges will result in slightly misformatted
quiet output rather than disaster.)
A few places in the pc-bios/ makefiles are updated to use
"BUILD", "SIGN" and "STRIP" rather than "Building",
"Signing" and "Stripping" for consistency and to keep them
below 7 characters. Module .mo links now print "LD" rather
than the nonstandard "LD -r".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
IPL should cause the IPL I/O device to become enabled. So when handling
the IPL program, we should set the E (Enable) bit. However, virtio-ccw
does not know whether it's dealing with an IPL device or not. Since
trying to perform I/O on a disabled device doesn't make any sense,
let's just always enable it. At the same time we can remove the
SCSW_FCTL_START_FUNC flag as it is ignored for msch anyway and did
not enable the device as intended.
Reported-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
[remove superfluous flag]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Since
commit a9c87304b7 ("build-sys: fix building with make CFLAGS=.. argument")
pc-bios/s390-ccw.img build might fail with
--- snip ---
main.o: In function `virtio_setup':
qemu/pc-bios/s390-ccw/main.c:117: undefined reference to `__stack_chk_fail'
--- snip ---
Changing the CFLAGS to QEMU_CFLAGS does the trick. We also need to
add -fno-strict-aliasing as this was filtered out.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1471258997-5811-1-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
There is ,bootindex=%d argument to specify the lookup order of
boot devices.
If a bootindex assigned to the device, then IPL Parameter Info Block
is created for that device when it is IPLed from.
If it is a mere SCSI device (not FCP), then IPIB is created with a
special SCSI type and its fields are used to store SCSI address of the
device. This new ipl block is private to qemu for now.
If the device to IPL from is specified this way, then SCSI bus lookup
is bypassed and prescribed devices uses the address specified.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
To IPL from a device, pc-bios receives from qemu a device address via
general register 7. The better way to do it is to use diag308/6
instruction which returns so called
"IplParameterBlock". IplParameterBlock contains the device address for
IPL and additional parameters that can be used by pc-bios.
This patch allows pc-bios to get device address via diag308/6 and
doesn't use gr7 passed boot information anymore.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Don't indicate the same error message for different conditions.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Improve the algorithm that tries to guess the disk layout:
1. Use CD-ROMs to read ISO only
2. Make explicit paths for -scsi and -blk virtio
Acked-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Make the code added before to work.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add dispatching code to make room for non virtio-blk boot devices.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add VDev "object" as a container for all device-related items.
The default object is static.
Leverage dependency on many different device-related globals.
Make them syntactically visible.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add ability to work with up to 3 vrings, which is required for
virtio-scsi implementation.
Implement the optional cookie to speed up processing of virtio
notifications.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Turn [the most of] existing declarations from
struct type_name { ... };
into
struct TypeName { ... };
typedef struct TypeName TypeName;
and make use of them.
Also switch u{8,16,32,64} to uint{8,16,32,64}_t.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add several utility functions, make IPL_check and IPL_assert generally
available, etc.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This function has nothing to do with virtio.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Experiments showed possibility of few more "misconfigurations" in disk
layout. They are reported now.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We need to increment by the size of the structure, whereas 'ns' is 'uint8_t *'.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Newer distributions have an architecture level set to z9, z196
or similar - also as default option for the compiler.
We should build the bios for z900 to allow it to run with
all 64bit CPUs. This will become more important as soon as
QEMU/KVM does support CPU models.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Because of El Torito spec flaw boot image size needs to be verified.
Boot catalog entry size field has 16-bit width, and specifies size
in 512-byte units.
Thus, boot image size cannot exceed 32M.
We actually search for the file to get the file size.
This is done by scanning the ISO directory tree for the ISO block number
and reading the file size from the directory entry.
Signed-off-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Boot entry is considered compatible if boot image is Linux kernel
with matching S390 Linux magic string.
Empty boot images with sector_count == 0 are considered broken.
Signed-off-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch enables boot from media formatted according to
ISO-9660 and El Torito bootable CD specification.
We try to boot from device as ISO-9660 media when SCSI IPL failed.
The first boot catalog entry with bootable flag is used.
ISO-9660 media with default 2048-bytes sector size only is supported.
Signed-off-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's always adjust the sector number to be read using the current
virtio block size value.
This prepares for the implementation of IPL from ISO-9660 media.
Signed-off-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Some gcc versions (e.g. Fedora 22 gcc 5.1.1) seem to use floating
point registers for spilling and filling of general purpose registers.
As the BIOS does not activate the AFP register setting of CR0 this can
cause data exception program checks.
Disallow floating point in the BIOS as a simple solution.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-2-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If no bootdevice was specified, we try to autodetect a suitable IPL
device. Current code only searched in subchannel set 0; extend this
search to higher subchannel sets as well.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We have to consume the outstanding service interrupt after each
service call, otherwise a correct implementation will return
CC=2 on subsequent service calls.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Starting with version 4.9, GCC assumes it can't safely dereference null
pointers, and uses this for some optimizations. On s390, the lowcore
memory is located at address 0, so this assumption is wrong and breaks
the s390-ccw firmware. Pass -fdelete-null-pointer-checks to avoid that.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1434363843-14576-1-git-send-email-aurelien@aurel32.net>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The current bios sits at location 0x7e00000 in the guest RAM
and thus prevents loading of bigger ramdisks. By making the
image relocatable we can move it to the end of the RAM so that
it is getting out of the way.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Message-Id: <1425895973-15239-3-git-send-email-thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[Fixup build failure on 32 bit hosts]
guessed_disk_nature is a static zero variable. As the QEMU ELF
loader does not zero the BSS section, lets do it explicitely here.
This fixes reboot for some corner cases (like FCP flash
devices with logical_block_size=512, physical_block_size=4096)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <1425310029-53396-3-git-send-email-borntraeger@de.ibm.com>
The s390-ccw bios creates the the virtqueue at 100MB. For
big ramdisks or offsets (via zipl) this gets overwritten.
As a quick band-aid, lets move the virtqueue into the bss
section, which is at 0x7f00000. As the bios code (text) is
at 0x7e00000 we can now handle ramdisk which are ~27MB
bigger.
Long term we want to make the s390-ccw bios position
independent and load of at the end of memory.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <1425310029-53396-2-git-send-email-borntraeger@de.ibm.com>
Fix some sparse warnings in the s390-ccw bios.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The final newline/return must happen before we reset the sclp via
diag 308.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
There are two known cases of DASD format where signatures are
incomplete or absent:
1. result of <dasdfmt -d ldl -L ...> (ECKD_LDL_UNLABELED)
2. CDL with zero keys in IPL1 and IPL2 records
Now the code attempts to
1. find zIPL and use SCSI layout
2. find IPL1 and use CDL layout
3. find CMS1 and use LDL layout
3. find LNX1 and use LDL layout
4. find zIPL and use unlabeled LDL layout
5. find zIPL and use CDL layout
6. die
in this sequence.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For EAV ECKD DASD, the cylinder count will have the magic value
0xfffeU. Therefore, use the block number to test for valid eckd
addresses instead.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Using dasdfmt(8) to format a DASD allows to choose a block size.
There are four supported values: 512, 1024, 2048, and 4096 bytes
per block. Each block size leads to selection of new count of
sectors per track. The head count remains always the same: 15.
This empiric knowledge is used to detect ECKD DASD to IPL from.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The block size value may be given "as is" OR as a base value and
a shift count (exponent). So, we have to use calculation to get
the proper number in the code.
The main expression reads as
(blk_cfg.blk_size << blk_cfg.physical_block_exp)
E.g., various combinations between blk_size=1/physical_block_exp=12
and blk_size=4096/physical_block_exp=0 are valid for 4K blocks.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
POP chapter 17 requires to store a subsystem information word at 184
during IPL. Furthermore bytes 188-191 should be zero. The bootmap might
contain data blocks that are written to the first page. We have to
write these values after we processed the bootmap and before the final
IPL.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add code that allows us to start from two further ECKD DASD disk
layouts: LDL (Linux disk layout) and CMS (cms-formatted disk).
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add code that allows us to start from ECKD DASD using the z/OS
compatible disk layout (CDL), which is the most common format for ECKD
DASD.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Move the scsi-disk specific ipl code from zipl_load() into a new
function ipl_scsi(). This makes it easier to add ipl routines for other
disk types.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Factor out helper function for dumping a hex value into a buffer.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Use the virtio device's configuration to figure out the disk geometry
and use a sector size based upon the layout.
[CH: s/SECTOR_SIZE/MAX_SECTOR_SIZE/g]
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add declarations to describe structure of different dasd IPL sources
(eckd and fba). Move the structure definitions to a new header bootmap.h.
While we are at it, change structs to typedefs.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We need to interpret the last entry of the bootmap with zero
block count as "continuation pointer".
The "last entry" is being detected by pre-filling of the scratch
space with known values and respective look-ahead.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
