Commit Graph

408 Commits

Author SHA1 Message Date
Fam Zheng
063143d5b1 scsi-generic: Merge block max xfer len in INQUIRY response
The rationale is similar to the above mode sense response interception:
this is practically the only channel to communicate restraints from
elsewhere such as host and block driver.

The scsi bus we attach onto can have a larger max xfer len than what is
accepted by the host file system (guarding between the host scsi LUN and
QEMU), in which case the SG_IO we generate would get -EINVAL.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464243305-10661-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29 09:11:12 +02:00
Paolo Bonzini
8fdc7839e4 scsi-block: always use SG_IO
Using pread/pwrite or io_submit has the advantage of eliminating the
bounce buffer, but drops the SCSI status.  This keeps the guest from
seeing unit attention codes, as well as statuses such as RESERVATION
CONFLICT.  Because we know scsi-block operates on an SBC device we can
still use the DMA helpers with SG_IO; just remember to patch the CDBs
if the transfer is split into multiple segments.

This means that scsi-block will always use the thread-pool unfortunately,
instead of respecting aio=native.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29 09:11:11 +02:00
Paolo Bonzini
5b956f415a scsi-disk: introduce scsi_disk_req_check_error
Commonize all the checks for canceled requests and errors.  The next patch
will add another case to check for, in order to handle passthrough commands.

There is no semantic change here; the only nontrivial modification is in
scsi_write_do_fua, where cancellation has been checked earlier by both
callers.  Thus, the check is replaced with an assertion.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29 09:11:11 +02:00
Paolo Bonzini
94f8ba1125 scsi-disk: add need_fua_emulation to SCSIDiskClass
scsi-block will be able to do FUA just by passing the request through
to the LUN (which is also more efficient); there is no need to emulate
it like we do for scsi-disk.

Add a new method to distinguish this.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29 09:11:11 +02:00
Paolo Bonzini
fcaafb1001 scsi-disk: introduce dma_readv and dma_writev
These are replacements for blk_aio_readv and blk_aio_writev that allow
customization of the data path.  They reuse the DMA helpers' DMAIOFunc
callback type, so that the same function can be used in either the
QEMUSGList or the bounce-buffered case.

This customization will be needed in the next patch to do zero-copy
SG_IO on scsi-block.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29 09:11:11 +02:00
Paolo Bonzini
993935f315 scsi-disk: introduce a common base class
This will be the place to add DMAIOFuncs in the next patch.  There
are also a couple DeviceClass members that can be moved to the
abstract class's initialization function.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29 09:11:11 +02:00
Prasad J Pandit
b60bdd1f1e scsi: megasas: check 'read_queue_head' index value
While doing MegaRAID SAS controller command frame lookup, routine
'megasas_lookup_frame' uses 'read_queue_head' value as an index
into 'frames[MEGASAS_MAX_FRAMES=2048]' array. Limit its value
within array bounds to avoid any OOB access.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464179110-18593-1-git-send-email-ppandit@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29 09:11:11 +02:00
Prasad J Pandit
d37af74073 scsi: megasas: initialise local configuration data buffer
When reading MegaRAID SAS controller configuration via MegaRAID
Firmware Interface(MFI) commands, routine megasas_dcmd_cfg_read
uses an uninitialised local data buffer. Initialise this buffer
to avoid stack information leakage.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464178304-12831-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29 09:11:10 +02:00
Prasad J Pandit
1b85898025 scsi: megasas: use appropriate property buffer size
When setting MegaRAID SAS controller properties via MegaRAID
Firmware Interface(MFI) commands, a user supplied size parameter
is used to set property value. Use appropriate size value to avoid
OOB access issues.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464172291-2856-2-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29 09:11:10 +02:00
Prasad J Pandit
06630554cc scsi: mptsas: infinite loop while fetching requests
The LSI SAS1068 Host Bus Adapter emulator in Qemu, periodically
looks for requests and fetches them. A loop doing that in
mptsas_fetch_requests() could run infinitely if 's->state' was
not operational. Move check to avoid such a loop.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Message-Id: <1464077264-25473-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29 09:11:10 +02:00
Prasad J Pandit
3e831b40e0 scsi: pvscsi: check command descriptor ring buffer size (CVE-2016-4952)
Vmware Paravirtual SCSI emulation uses command descriptors to
process SCSI commands. These descriptors come with their ring
buffers. A guest could set the ring buffer size to an arbitrary
value leading to OOB access issue. Add check to avoid it.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Message-Id: <1464000485-27041-1-git-send-email-ppandit@redhat.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29 09:11:10 +02:00
Eric Blake
d004bd52aa block: Rename blk_write_zeroes()
Commit 983a1600 changed the semantics of blk_write_zeroes() to
be byte-based rather than sector-based, but did not change the
name, which is an open invitation for other code to misuse the
function.  Renaming to pwrite_zeroes() makes it more in line
with other byte-based interfaces, and will help make it easier
to track which remaining write_zeroes interfaces still need
conversion.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-05-25 19:04:21 +02:00
Paolo Bonzini
cbe0ed6247 dma-helpers: change interface to byte-based
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-25 19:04:11 +02:00
Prasad J Pandit
6c1fef6b59 esp: check dma length before reading scsi command(CVE-2016-4441)
The 53C9X Fast SCSI Controller(FSC) comes with an internal 16-byte
FIFO buffer. It is used to handle command and data transfer.
Routine get_cmd() uses DMA to read scsi commands into this buffer.
Add check to validate DMA length against buffer size to avoid any
overrun.

Fixes CVE-2016-4441.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1463654371-11169-3-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-23 16:53:46 +02:00
Prasad J Pandit
c98c6c105f esp: check command buffer length before write(CVE-2016-4439)
The 53C9X Fast SCSI Controller(FSC) comes with an internal 16-byte
FIFO buffer. It is used to handle command and data transfer. While
writing to this command buffer 's->cmdbuf[TI_BUFSZ=16]', a check
was missing to validate input length. Add check to avoid OOB write
access.

Fixes CVE-2016-4439.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1463654371-11169-2-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-23 16:53:45 +02:00
Stefan Weil
cb8d4c8f54 Fix some typos found by codespell
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-18 15:04:27 +03:00
Eric Blake
03c90063cc scsi-disk: Switch to byte-based aio block access
Sector-based blk_aio_readv() and blk_aio_writev() should die; switch
to byte-based blk_aio_preadv() and blk_aio_pwritev() instead.

As part of the cleanup, scsi_init_iovec() no longer needs to return
a value, and reword a comment.

[ kwolf: Fix read accounting change ]

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12 15:22:09 +02:00
Eric Blake
983a160050 block: Switch blk_*write_zeroes() to byte interface
Sector-based blk_write() should die; convert the one-off
variant blk_write_zeroes() to use an offset/count interface
instead.  Likewise for blk_co_write_zeroes() and
blk_aio_write_zeroes().

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12 15:22:08 +02:00
Paolo Bonzini
a378b49a43 virtio: merge virtio_queue_aio_set_host_notifier_handler with virtio_queue_set_aio
Eliminating the reentrancy is actually a nice thing that we can do
with the API that Michael proposed, so let's make it first class.
This also hides the complex assign/set_handler conventions from
callers of virtio_queue_aio_set_host_notifier_handler, which in
fact was always called with assign=true.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07 19:57:33 +03:00
Paolo Bonzini
a8f2e5c8ff virtio-scsi: use aio handler for data plane
In addition to handling IO in vcpu thread and in io thread, dataplane
introduces yet another mode: handling it by AioContext.

This reuses the same handler as previous modes, which triggers races as
these were not designed to be reentrant.  Use a separate handler just
for aio, and disable regular handlers when dataplane is active.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07 19:57:33 +03:00
Paolo Bonzini
43c696a298 virtio-scsi: fix disabled mode
Add two missing checks for s->dataplane_fenced.  In one case, QEMU
would skip injecting an IRQ due to a write to an uninitialized
EventNotifier's file descriptor.

In the second case, the dataplane_disabled field was used by mistake;
in fact after fixing this occurrence it is completely unused.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07 19:57:33 +03:00
Veronia Bahaa
f348b6d1a5 util: move declarations out of qemu-common.h
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)

Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Paolo Bonzini
4771d756f4 hw: explicitly include qemu-common.h and cpu.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Markus Armbruster
c80f6e9caa Clean up includes some more
Manually drop redundant includes that scripts/clean-includes misses,
e.g. because they're hidden in generator programs, or they use the
wrong kind of delimiter.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:16 +01:00
Markus Armbruster
da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Alex Pyrgiotis
4792b7e9d5 scsi-bus: Remove tape command from scsi_req_xfer
Remove the RECOVER_BUFFERED_DATA command from the list of commands that
are handled by scsi_req_xfer(). Given that this command is
tape-specific, it should be handled only by scsi_stream_req_xfer().

Signed-off-by: Alex Pyrgiotis <apyrgio@arrikto.com>

Message-Id: <1457365822-22435-1-git-send-email-apyrgio@arrikto.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-07 17:56:23 +01:00
Paolo Bonzini
e24a47c5b7 virtio-scsi: do not use vring in dataplane
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25 13:14:19 +02:00
Paolo Bonzini
9155b7606a mptsas: fix wrong formula
MPI_DOORBELL_WHO_INIT_SHIFT is being repeated twice.  Reported
by Coverity.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16 16:41:22 +01:00
Paolo Bonzini
18557e646b mptsas: fix memory leak
Reported by Coverity.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16 16:41:20 +01:00
Paolo Bonzini
b44bbeb44b mptsas: add missing va_end
Reported by Coverity.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16 16:41:17 +01:00
Paolo Bonzini
e351b82611 hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance.  Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller.  The device corresponds to the mptsas kernel driver in
Linux.

A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers.  It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.

To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well.  The configuration pages are still based mostly on
VirtualBox's, though not exactly the same.  However, the implementation
is completely different.  The contents of the pages themselves should
not be copyrightable.

Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09 15:45:26 +01:00
Paolo Bonzini
9fd7e85938 scsi-generic: grab device and port SAS addresses from backend
This lets a SAS adapter expose them through its own configuration
mechanism.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09 15:45:26 +01:00
Paolo Bonzini
2ecab4084f scsi: push WWN fields up to SCSIDevice
SAS adapters need to access them in order to publish the SAS addresses
of the end devices connected to them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09 15:45:26 +01:00
Paolo Bonzini
ab281c1781 virtio: introduce qemu_get/put_virtqueue_element
Move allocation to virtio functions also when loading/saving a
VirtQueueElement.  This will also let the load/save functions
keep backwards compatibility when the VirtQueueElement layout
is changed.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06 20:44:08 +02:00
Paolo Bonzini
51b19ebe43 virtio: move allocation to virtqueue_pop/vring_pop
The return code of virtqueue_pop/vring_pop is unused except to check for
errors or 0.  We can thus easily move allocation inside the functions
and just return a pointer to the VirtQueueElement.

The advantage is that we will be able to allocate only the space that
is needed for the actual size of the s/g list instead of the full
VIRTQUEUE_MAX_SIZE items.  Currently VirtQueueElement takes about 48K
of memory, and this kind of allocation puts a lot of stress on malloc.
By cutting the size by two or three orders of magnitude, malloc can
use much more efficient algorithms.

The patch is pretty large, but changes to each device are testable
more or less independently.  Splitting it would mostly add churn.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-02-06 20:39:07 +02:00
Paolo Bonzini
6aa46d8ff1 virtio: move VirtQueueElement at the beginning of the structs
The next patch will make virtqueue_pop/vring_pop allocate memory for
the VirtQueueElement. In some cases (blk, scsi, gpu) the device wants
to extend VirtQueueElement with device-specific fields and, until now,
the place of the VirtQueueElement within the containing struct didn't
matter. When allocating the entire block in virtqueue_pop/vring_pop,
however, the containing struct must basically be a "subclass" of
VirtQueueElement, with the VirtQueueElement as the first field. Make
that the case for blk and scsi; gpu is already doing it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-02-04 19:53:02 +02:00
Max Reitz
5b9e0e4693 virtio-scsi: Catch BDS-BB removal/insertion
Make use of the BDS-BB removal and insertion notifiers to remove or set
up, respectively, virtio-scsi's op blockers.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02 17:50:46 +01:00
Peter Maydell
a4ab4792a7 hw/scsi: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-24-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:24 +00:00
Peter Maydell
9b8bfe21be virtio: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-15-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:23 +00:00
Peter Maydell
0d75590d91 ppc: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
Cao jin
e1dc68155c SCSI device: fix to incomplete QOMify
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1452073066-28319-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:58:01 +01:00
P J P
36fef36b91 scsi: initialise info object with appropriate size
While processing controller 'CTRL_GET_INFO' command, the routine
'megasas_ctrl_get_info' overflows the '&info' object size. Use its
appropriate size to null initialise it.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <alpine.LFD.2.20.1512211501420.22471@wniryva>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: P J P <ppandit@redhat.com>
2016-01-15 18:58:01 +01:00
Paolo Bonzini
3daa41078a scsi: revert change to scsi_req_cancel_async and add assertions
Fam Zheng noticed that the change in commit 36896bf ("scsi: always call
notifier on async cancellation", 2015-12-16) could cause a leak of
the request; scsi_req_cancel_async now calls scsi_req_ref
multiple times for multiple cancellations, but there is only
one call to scsi_req_cancel_complete.

So revert the patch and instead assert that the problematic case (a call
to scsi_req_cancel_async after the aiocb has been completed) cannot
happen.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15 18:57:32 +01:00
Markus Armbruster
e43bfd9c87 error: Use error_prepend() where it makes obvious sense
Done with this Coccinelle semantic patch

    @@
    expression FMT, E1, E2;
    expression list ARGS;
    @@
    -    error_setg(E1, FMT, ARGS, error_get_pretty(E2));
    +    error_propagate(E1, E2);/*###*/
    +    error_prepend(E1, FMT/*@@@*/, ARGS);

followed by manual cleanup, first because I can't figure out how to
make Coccinelle transform strings, and second to get rid of now
superfluous error_propagate().

We now use or propagate the original error whole instead of just its
message obtained with error_get_pretty().  This avoids suppressing its
hint (see commit 50b7b00), but I can't see how the errors touched in
this commit could come with hints.  It also improves the message
printed with &error_abort when we screw up (see commit 1e9b65b).

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13 15:16:17 +01:00
Paolo Bonzini
36896bffd1 scsi: always call notifier on async cancellation
This was found by code inspection.  If the request is cancelled twice,
the notifier is never called on the second cancellation request,
and hence for example a TMF might never finish.

All the calls in scsi_req_cancel_async are idempotent, so the change
is safe.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1450290827-30508-2-git-send-email-pbonzini@redhat.com>
2015-12-17 17:33:49 +01:00
Paolo Bonzini
8aad35f678 scsi: use scsi_req_cancel_async when purging requests
This avoids calls to aio_poll without having acquired the context first.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1450290827-30508-1-git-send-email-pbonzini@redhat.com>
2015-12-17 17:33:49 +01:00
Shmulik Ladkani
d5da3ef2e2 vmw_pvscsi: Introduce 'x-disable-pcie' backword compatability property
Following the previous patch which changed pvscsi to be a pci express
device, this patch introduces a boolean property 'x-disable-pcie'.

Its default value is false, exposing pvscsi as a pcie device.

Setting 'x-disable-pcie' to 'on' preserves the old 'pci device' (non
express) behavior. This allows migration to older versions.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-7-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Shmulik Ladkani
1dd1305e66 vmw_pvscsi: The pvscsi device is a PCIE endpoint
Report the 'express endpoint' capability if on a PCIE bus.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-6-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Shmulik Ladkani
e2d4f3f75b vmw_pvscsi: coding: Introduce PVSCSIClass
Introduce a class type for pvscsi, and the usual
DEVICE_CLASS/DEVICE_GET_CLASS macros.

No semantic change.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-5-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Shmulik Ladkani
952970ba56 vmw_pvscsi: Introduce 'x-old-pci-configuration' backword compatability property
Following the previous patches, which introduced various changes in
pvscsi's pci configuration space (device subsystem id and revision, msi
offset), this patch introduces a boolean property
'x-old-pci-configuration' to pvscsi.

Its default value is false, exposing the above changes in the pci config
space.

Setting 'x-old-pci-configuration' to 'on' preserves the old behavior,
which allows migration to older versions.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-4-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Shmulik Ladkani
836fc48cbc vmw_pvscsi: Change offset of msi pci capability
Place device reported MSI capability at the same offset as placed by
the VMware virtual hardware - at offset 0x7c.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-3-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Shmulik Ladkani
d29d4ff8ef vmw_pvscsi: Set device subsystem and revision
To be VMware PVSCSI SCSI Controller, rev 02.
As reported by the VMware virtual hardware.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Message-Id: <1449994112-7054-2-git-send-email-shmulik.ladkani@ravellosystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:34 +01:00
Eugene (jno) Dvurechenski
3e32e8a96e virtio-scsi: don't crash without a valid device
Make sure that we actually have a device when checking the aio
context. Otherwise guests could trigger QEMU crashes.

Signed-off-by: "Eugene (jno) Dvurechenski" <jno@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1448549135-6582-2-git-send-email-jno@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-26 16:47:44 +01:00
Alberto Garcia
d7628080f3 scsi-disk: Account for failed operations
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 0ead7b0e59c22926e033ca12725e3a31985ec46b.1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12 16:22:47 +01:00
Peter Maydell
496c1b19fa * Guest ABI fixes for PC machines (hw_version)
* Fixes for recent Perl
 * John Snow's configure fixes
 * file-backed RAM improvements (Igor, Pavel)
 * -Werror=clobbered fixes (Stefan)
 * Kill -d ioport
 * Fix qemu-system-s390x
 * Performance improvement for kvmclock migration
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJWO1zDAAoJEL/70l94x66DXRgH/ArIMi9MGU2Vxi6wNFG9hKUl
 Cl13IS8VO0ui6R/0F1BFGK90WYxfM5ZsVLPnTdk4OeapY6eKnw0O44VE0GqDZKFa
 k3B9qzQLGPLZV75cd8WP+ZHDbPcIgPecr8Jz3/w18rYIcGZQ6GF45xgdJ0hnYQ4j
 bQdEiseZyuPyeBU+f6cyNeD/nct4CehJWFwK+WwPc8C96tUIpVSJWwsiOf6NWvda
 KgSs1fCInw9e1//qCWWPxojEvTTW/JdmAOHyh9JTEpUezlXrDrRa5bDwng1VkVHM
 SZZ8H30GZmp/r9UH32TAlnxWvnRunE+uQVTyl3EAS6J7M+K+7fx2voBYSrN4dEY=
 =vr8Z
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Guest ABI fixes for PC machines (hw_version)
* Fixes for recent Perl
* John Snow's configure fixes
* file-backed RAM improvements (Igor, Pavel)
* -Werror=clobbered fixes (Stefan)
* Kill -d ioport
* Fix qemu-system-s390x
* Performance improvement for kvmclock migration

# gpg: Signature made Thu 05 Nov 2015 13:42:27 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream:
  iscsi: Translate scsi sense into error code
  Revert "Introduce cpu_clean_all_dirty"
  kvmclock: add a new function to update env->tsc.
  configure: disable FORTIFY_SOURCE under clang
  backends/hostmem-file: Allow to specify full pathname for backing file
  configure: disallow ccache during compile tests
  cpu-exec: Fix compiler warning (-Werror=clobbered)
  memory: call begin, log_start and commit when registering a new listener
  megasas: Use qemu_hw_version() instead of QEMU_VERSION
  osdep: Rename qemu_{get, set}_version() to qemu_{, set_}hw_version()
  pc: Set hw_version on all machine classes
  qemu-log: remove -d ioport
  ioport: do not use CPU_LOG_IOPORT
  target-i386: fix pcmpxstrx equal-ordered (strstr) mode
  scripts/text2pod.pl: Escape left brace
  file_ram_alloc: propagate error to caller instead of terminating QEMU

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-05 14:31:24 +00:00
Eduardo Habkost
69fbd0ea25 megasas: Use qemu_hw_version() instead of QEMU_VERSION
Guest visible data shouldn't change with a simple QEMU upgrade, so use
qemu_hw_version() to ensure it won't change (as long as the machine
class being used has hw_version set).

Cc: Hannes Reinecke <hare@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-block@nongnu.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446233769-7892-4-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04 15:02:31 +01:00
Eduardo Habkost
35c2c8dc8c osdep: Rename qemu_{get, set}_version() to qemu_{, set_}hw_version()
This makes the purpose of the function clearer: it is not about the
version of QEMU that's running, but the version string exposed in the
emulated hardware.

Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446233769-7892-3-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04 15:02:31 +01:00
Pavel Butsykin
10a06fd65f virtio: sync the dataplane vring state to the virtqueue before virtio_save
When creating snapshot with the dataplane enabled, the snapshot file gets
not the actual state of virtqueue, because the current state is stored in
VirtIOBlockDataPlane. Therefore, before saving snapshot need to sync
the dataplane vring state to the virtqueue. The dataplane will resume its
work at the next notify virtqueue.

When snapshot loads with loadvm we get a message:
VQ 0 size 0x80 Guest index 0x15f5 inconsistent with Host index 0x0:
    delta 0x15f5
error while loading state for instance 0x0 of device
    '0000:00:08.0/virtio-blk'
Error -1 while loading VM state

to reproduce the error I used the following hmp commands:
savevm snap1
loadvm snap1

qemu parameters:
--enable-kvm -smp 4 -m 1024 -drive file=/var/lib/libvirt/images/centos6.4.qcow2,if=none,id=drive-virtio-disk0,format=qcow2,cache=none,aio=native -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x8,drive=drive-virtio-disk0,id=virtio-disk0 -set device.virtio-disk0.x-data-plane=on

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1445859777-2982-1-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-29 17:59:27 +00:00
Michael S. Tsirkin
4ada533189 virtio-scsi: convert to virtqueue_map
Note: virtqueue_map already validates input
so virtio-scsi does not have to.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2015-10-29 11:05:24 +02:00
Fam Zheng
3a1e8074d7 dataplane: Mark host notifiers' client type as "external"
They will be excluded by type in the nested event loops in block layer,
so that unwanted events won't be processed there.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:24 +02:00
Fam Zheng
dca21ef23b aio: Add "is_external" flag for event handlers
All callers pass in false, and the real external ones will switch to
true in coming patches.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23 18:18:23 +02:00
Thomas Huth
a23dec105c hw/scsi/spapr_vscsi: Remove superfluous memset
g_malloc0 already clears the memory, so no need for
the additional memset here.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 10:38:11 +11:00
Peter Maydell
ca3e40e233 vhost, pc, virtio features, fixes, cleanups
New features:
     VT-d support for devices behind a bridge
     vhost-user migration support
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWKMrnAAoJECgfDbjSjVRpVL0H/iRc31o00QE4nWBRpxUpf8WJ
 V5RWE8qKkDgBha5bS5Nt4vs8K4jkkHGXCbmygMidWph96hUPK8/yHy1A/wmpBibB
 5hVSPDK8onavNGJwpaWDrkhd9OhKAaKOuu49T6+VWJGZY/uX5ayqmcN934y0NPUa
 4EhH5tyxPpYOYeW9i/VOMQ374gCJcpzYBMug4NJZRyFpfz/b2mzAQtoqw3EsPtB0
 vpVJ+fKiCyG39HFKQJW7cL12yBeXOoyhjfDxpumLqwLWMfmde+vJwTFx6wbechgV
 aU3jIdvUX8wHCNYaB937NsMaDALoGNqUjbpKnf+xD1w7xr9pwTzdyrGH3rpGLEE=
 =+G1+
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost, pc, virtio features, fixes, cleanups

New features:
    VT-d support for devices behind a bridge
    vhost-user migration support

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 22 Oct 2015 12:39:19 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (37 commits)
  hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT
  i386: keep cpu_model field in MachineState uptodate
  vhost: set the correct queue index in case of migration with multiqueue
  piix: fix resource leak reported by Coverity
  seccomp: add memfd_create to whitelist
  vhost-user-test: check ownership during migration
  vhost-user-test: add live-migration test
  vhost-user-test: learn to tweak various qemu arguments
  vhost-user-test: wrap server in TestServer struct
  vhost-user-test: remove useless static check
  vhost-user-test: move wait_for_fds() out
  vhost: add migration block if memfd failed
  vhost-user: use an enum helper for features mask
  vhost user: add rarp sending after live migration for legacy guest
  vhost user: add support of live migration
  net: add trace_vhost_user_event
  vhost-user: document migration log
  vhost: use a function for each call
  vhost-user: add a migration blocker
  vhost-user: send log shm fd along with log_base
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-22 12:41:44 +01:00
Marc-André Lureau
21e704256d vhost: use a function for each call
Replace the generic vhost_call() by specific functions for each
function call to help with type safety and changing arguments.

While doing this, I found that "unsigned long long" and "uint64_t" were
used interchangeably and causing compilation warnings, using uint64_t
instead, as the vhost & protocol specifies.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Fix enum usage and MQ - Thibaut Collet]
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22 14:34:49 +03:00
Paolo Bonzini
8ef2eb8d2c megasas: fix megasas_get_sata_addr
There are two bugs here.  First, the 16-bit id loses the high 8 bits
when shifted left by 24.  Second, the address must be combined with
an "or" or we just get zero.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-12 18:29:25 +02:00
Paolo Bonzini
633dccb458 scsi: switch from g_slice allocator to malloc
Simplify memory allocation by sticking with a single API.  GSlice
is not that fast anyway (tcmalloc/jemalloc are better).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-12 18:29:25 +02:00
Marc-André Lureau
500887768a vhost-scsi: include linux/vhost.h
Replace ad-hoc declarations with the linux header.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1442585920-28373-1-git-send-email-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:41 +02:00
Paolo Bonzini
0eb2baeb44 scsi-generic: let guests recognize readonly=on on passthrough devices
Passed-through SCSI devices can be opened with the readonly=on option.
When this happens, Linux filters away write commands so that the guest
cannot overwrite the contents of the device.

However, the guest does not know that the device is read-only, and
accepts writes.  The writes only fail later when the page cache is
flushed.

This patch modifies scsi-generic to modify the MODE SENSE data and
set the read-only bit in the device-specific parameters, so that
the guest OS treats the disk as write protected.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:41 +02:00
Peter Maydell
a2aa09e181 * Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
 * cutils: qemu_strto* wrappers
 * iohandler.c simplification
 * Many other fixes and misc patches.
 
 And some MTTCG work (with Emilio's fixes squashed):
 * Signal-free TCG kick
 * Removing spinlock in favor of QemuMutex
 * User-mode emulation multi-threading fixes/docs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
 NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
 fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
 dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
 JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
 7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
 =nB06
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.

And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs

# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (44 commits)
  cutils: work around platform differences in strto{l,ul,ll,ull}
  cpu-exec: fix lock hierarchy for user-mode emulation
  exec: make mmap_lock/mmap_unlock globally available
  tcg: comment on which functions have to be called with mmap_lock held
  tcg: add memory barriers in page_find_alloc accesses
  remove unused spinlock.
  replace spinlock by QemuMutex.
  cpus: remove tcg_halt_cond and tcg_cpu_thread globals
  cpus: protect work list with work_mutex
  scripts/dump-guest-memory.py: fix after RAMBlock change
  configure: Add support for jemalloc
  add macro file for coccinelle
  configure: factor out adding disas configure
  vhost-scsi: fix wrong vhost-scsi firmware path
  checkpatch: remove tests that are not relevant outside the kernel
  checkpatch: adapt some tests to QEMU
  CODING_STYLE: update mixed declaration rules
  qmp: Add example usage of strto*l() qemu wrapper
  cutils: Add qemu_strtoull() wrapper
  cutils: Add qemu_strtoll() wrapper
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 16:13:16 +01:00
Cornelia Huck
95129d6fc9 virtio: avoid leading underscores for helpers
Commit ef546f1275 ("virtio: add
feature checking helpers") introduced a helper __virtio_has_feature.
We don't want to use reserved identifiers, though, so let's
rename __virtio_has_feature to virtio_has_feature and virtio_has_feature
to virtio_vdev_has_feature.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-10 11:06:05 +03:00
Gonglei
f42bf6a262 vhost-scsi: fix wrong vhost-scsi firmware path
vhost-scsi bootindex does't work because Qemu passes
wrong fireware path to seabios.

before:
  /pci@i0cf8/scsi@7channel@0/vhost-scsi@0,0
after applying the patch:
  /pci@i0cf8/scsi@7/channel@0/vhost-scsi@0,0

Reported-by: Subo <subo7@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1440553971-11108-1-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09 15:34:55 +02:00
Paolo Bonzini
fa0d653b06 scsi-generic: identify AIO callbacks more clearly
Functions that are not callbacks should assert that aiocb is NULL and
have a SCSIGenericReq argument.

AIO callbacks should assert that aiocb is not NULL.  They also have an
opaque argument.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-14 23:40:32 +02:00
Paolo Bonzini
5fd2b563a7 scsi-disk: identify AIO callbacks more clearly
Functions that are not callbacks should assert that aiocb is NULL and
have a non-opaque argument (usually a pointer to SCSIDiskReq).

AIO callbacks should assert that aiocb is not NULL and take care of
calling block_acct done.  They also have an opaque argument.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-14 23:40:32 +02:00
Paolo Bonzini
d223c10453 scsi: create restart bottom half in the right AioContext
This matches commit 4407c1c (virtio-blk: Schedule BH in the right context,
2014-06-17), which did the same thing for virtio-blk.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-14 23:40:32 +02:00
Lu Lina
fe2d1a81d9 vhost-scsi: Clarify vhost_virtqueue_mask argument
vhost_virtqueue_mask takes an "absolute" virtqueue index, while the
code looks like it's passing an index that is relative to
s->dev.vq_index.  In reality, s->dev.vq_index is always zero, so
this patch does not make any difference, but the code is clearer.

Signed-off-by: Lu Lina <lina.lulina@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1437978359-17960-1-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-14 23:40:32 +02:00
Igor Mammedov
af103c9310 vhost/scsi: call vhost_dev_cleanup() at unrealize() time
vhost-scsi calls vhost_dev_init() at realize() time
but forgets to call it's counterpart vhost_dev_cleanup()
at unrealize() time.

Calling it should fix leaking of memory table and
mem_sections table in vhost device. And also unregister
vhost's memory listerner to prevent access from
memory core to freed memory.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1438262999-287627-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-30 15:45:07 +02:00
Fam Zheng
a56537a127 scsi-disk: Fix assertion failure on WRITE SAME
The last portion of an unaligned WRITE SAME command could fail the
assertion in bdrv_aligned_pwritev:

    assert(!qiov || bytes == qiov->size);

Because we updated data->iov.iov_len right above this if block, but
data->qiov still has the old size.

Reinitialize the qiov to make them equal and keep block layer happy.

Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1438159512-3871-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-30 15:44:09 +02:00
Stefan Hajnoczi
c85a7a0057 scsi-disk: fix cmd.mode field typo
The cmd.xfer field is the data length.  The cmd.mode field is the data
transfer direction.

scsi_handle_rw_error() was using the wrong error policy for read
requests.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1438262173-11546-3-git-send-email-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-30 15:44:04 +02:00
Stefan Hajnoczi
1cc933453b virtio-scsi: use virtqueue_map_sg() when loading requests
The VirtQueueElement struct is serialized during migration but the
in_sg[]/out_sg[] iovec arrays are not usable on the destination host
because the pointers are meaningless.

Use virtqueue_map_sg() to refresh in_sg[]/out_sg[] to valid pointers
based on in_addr[]/out_addr[] hwaddrs.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1438262173-11546-2-git-send-email-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-30 15:43:58 +02:00
Peter Maydell
170f209d78 virtio fixes for 2.4
Mostly virtio 1 spec compliance fixes.
 We are unlikely to make it perfectly compliant in
 the first release, but it seems worth it to try.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVtprUAAoJECgfDbjSjVRpgu4H/AljqEXBYIS/+7aZBGO4UnK/
 LSyxiOfw/sQPwYr8xqhYtoITVPQqkBnCajBFuDw3IaGrTDQ1pHfG8z5qt3Fri+yC
 RtiqiFg1LVR/AI8W/dUDuLAf8xq1GukZr1o59mi3hAA0pcPxUtVjPkZcaq63d0P+
 uzCgRw0qlg8nbT7SN2O9HZz7AT2emaUkaJBF2eRBb7r1kg3ZzM0FOtmCWaRhtS5s
 8AuHS+038BWA0J/S7yd5YooQh7NfvmWFpRNukMttJrtOmi7f5LCJJF9rxcXAnzOn
 Soc0afauCtUTfxJ4gkLqxQ586eKpREQ+7lzkJDQ62g1oD/+VatOMcbu3jdnJEtQ=
 =AoJS
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio fixes for 2.4

Mostly virtio 1 spec compliance fixes.
We are unlikely to make it perfectly compliant in
the first release, but it seems worth it to try.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon Jul 27 21:55:48 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  virtio: minor cleanup
  acpi: fix pvpanic device is not shown in ui
  virtio-blk: only clear VIRTIO_F_ANY_LAYOUT for legacy device
  virtio-blk: fail get_features when both scsi and 1.0 were set
  virtio: get_features() can fail
  virtio-pci: fix memory MR cleanup for modern
  virtio: set any_layout in virtio core
  virtio-9p: fix any_layout
  virtio-serial: fix ANY_LAYOUT
  virtio: hide legacy features from modern guests

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-28 17:09:56 +01:00
Salva Peiró
55875fc4ca megasas: Add write function to handle write access to PCI BAR 3
This patch fixes a QEMU SEGFAULT when a write operation is performed on
the memory region of the PCI BAR 3 (base address space).
When a writeb(0xe0000000) is performed the .write function is invoked to
handle the write access, however, since the .write is not initialised,
the call to 0, causes QEMU to SEGFAULT.

Signed-off-by: Salva Peiró <speirofr@gmail.com>
Acked-by: Hannes Reinecke <hare@suse.com>
Message-Id: <1437987112-24744-1-git-send-email-speirofr@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-27 23:05:49 +02:00
Jason Wang
9d5b731dd2 virtio: get_features() can fail
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-27 18:11:53 +03:00
Michael S. Tsirkin
09999a5f7f virtio: set any_layout in virtio core
Exceptions:
    - virtio-blk
    - compat machine types

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-27 11:24:48 +03:00
Matthew Rosato
7d99f4c1b5 scsi: Handle no media case for scsi_get_configuration
Currently, scsi_get_configuration always returns a current
profile (DVD or CD), even when there is actually no media present.
By comparison, ide/atapi uses a default profile of 0 (MMC_PROFILE_NONE)
for this case and checks for tray_open, so let's do the same for scsi.

This fixes a problem I'm seeing with Fedora 22 guests where systemd
cdrom_id fails to unmount after a QEMU-initiated eject against a
scsi cdrom device because it believes the media is still present
(but unreadable).

Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Message-Id: <1436986352-10695-1-git-send-email-mjrosato@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-24 13:57:45 +02:00
Paolo Bonzini
c170aad8b0 scsi: fix buffer overflow in scsi_req_parse_cdb (CVE-2015-5158)
This is a guest-triggerable buffer overflow present in QEMU 2.2.0
and newer.  scsi_cdb_length returns -1 as an error value, but the
caller does not check it.

Luckily, the massive overflow means that QEMU will just SIGSEGV,
making the impact much smaller.

Reported-by: Zhu Donghai (朱东海) <donghai.zdh@alibaba-inc.com>
Fixes: 1894df0281
Reviewed-by: Fam Zheng <famz@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-24 13:57:44 +02:00
Markus Armbruster
d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Peter Maydell
89e9429c3c virtio, pci fixes, enhancements
Most notably this includes virtio cross-endian patches.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVg+xdAAoJECgfDbjSjVRp6AAH/3ILznMtvJZjQ/WOjLEsL13M
 +0cYEM1LI6LbLhqeruQVVcY9/hx61yHxZMoLkVg/I2po7F4HDNI2vo5Y7eGx+xN0
 5rlcAw9/ZQ6SkCVmjN/VZfISW5mSqCaKH8gNzu8AigjsryJSj5iDXv1YJimwsF+5
 cgCerhLIVvEkXmNj1ChwR+fz1IgFzJ8TRaZ0N2glxLyVjgKS57diqZF3Rbg2DdQl
 BPbekbbtxesPgmKRvtarbhjx26TlnP1YShjhWA5r72gBNlqblLDycpaIGXr34b3a
 sLIZjxzQtTEGcaGtkifMgazyK3rY3JmzOshD0onFOWY1r6Abxuj7eTZOEE6JQXk=
 =tju/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pci fixes, enhancements

Most notably this includes virtio cross-endian patches.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vhost: enable vhost without without MSI-X
  pci: Don't register a specialized 'config_write' if default behavior is intended
  hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf()
  vhost_net: re-enable when cross endian
  vhost-net: tell tap backend about the vnet endianness
  tap: fix non-linux build
  tap: add VNET_LE/VNET_BE operations
  vhost: set vring endianness for legacy virtio
  virtio: introduce virtio_legacy_is_cross_endian()
  linux-headers: sync vhost.h
  vhost-user: part of virtio

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 11:30:57 +01:00
Pankaj Gupta
1e7398a140 vhost: enable vhost without without MSI-X
We use vhostforce to enable vhost even if Guests don't have MSI-X
support and we fall back to QEMU virtio-net.

This gives a very small performance gain, but the disadvantage
is that guest now controls which virtio code is running
(qemu or vhost) so our attack surface is doubled.

This patch will enable vhost unconditionally whenever it's requested.
For compatibility, enable vhost when vhostforce is set, as well.

Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
2015-06-19 12:17:49 +02:00
Shmulik Ladkani
74de5504fd pci: Don't register a specialized 'config_write' if default behavior is intended
Few devices have their specialized 'config_write' methods which simply
call 'pci_default_write_config' followed by a 'msix_write_config' or
'msi_write_config' calls, using exact same arguments.

This is unnecessary as 'pci_default_write_config' already invokes
'msi_write_config' and 'msix_write_config'.

Also, since 'pci_default_write_config' is the default 'config_write'
handler, we can simply avoid the registration of these specialized
versions.

Cc: Leonid Shatz <leonid.shatz@ravellosystems.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-19 12:17:49 +02:00
Juan Quintela
5cd8cadae8 migration: Use normal VMStateDescriptions for Subsections
We create optional sections with this patch.  But we already have
optional subsections.  Instead of having two mechanism that do the
same, we can just generalize it.

For subsections we just change:

- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
  it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
  VMStateDescription

Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12 06:53:57 +02:00
Shannon Zhao
21549a4642 vhost-scsi: move qdev properties into vhost-scsi.c
As only one place in vhost-scsi.c uses DEFINE_VHOST_SCSI_PROPERTIES,
there is no need to expose it. Inline it into vhost-scsi.c to avoid
wrongly use.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10 18:15:34 +02:00
Shannon Zhao
0c63237a90 virtio-scsi: move qdev properties into virtio-scsi.c
As only one place in virtio-scsi.c uses DEFINE_VIRTIO_SCSI_PROPERTIES
and DEFINE_VIRTIO_SCSI_FEATURES, there is no need to expose them. Inline
them into virtio-scsi.c to avoid wrongly use.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10 18:15:34 +02:00
Gerd Hoffmann
019a3edbb2 virtio: make features 64bit wide
Make features 64bit wide everywhere.

On migration a full 64bit guest_features field is sent if one of the
high bits is set, in addition to the lower 32bit guest_features field
which must stay for compatibility reasons.  That way we send the lower
32 feature bits twice, but the code is simpler because we don't have
to split and compose the 64bit features into two 32bit fields.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01 14:18:55 +02:00
Jason Wang
87b3bd1c85 virtio: rename VIRTIO_PCI_QUEUE_MAX to VIRTIO_QUEUE_MAX
VIRTIO_PCI_QUEUE_MAX is not only used for pci, so rename it be generic.

Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31 16:50:10 +02:00
Peter Maydell
0403b0f539 pc, virtio enhancements
Memory hot-unplug support for pc, MSI-X
 mapping update speedup for virtio-pci,
 misc refactorings and bugfixes.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVUFj/AAoJECgfDbjSjVRpteQH+gKoOMKilM6qvgdQS9vduFJ+
 lDHNnmfgzWjVMEetiUOc9hImfEEyTyDFrkSI3wf4a8RZ7UnnDKD8hZR1nToySJPd
 SuDP/EdtXYtInIMjc1MUUrJEP6qtjjgM+IbikVzHDxCeekrTMFz2w05MZ+V+hxI5
 8b8ndPNfjX3ciIRjHKZ2u6hKEemhzxr1yyKTnJVGDN07hmfMbCyLsiWnFfShZwfv
 g7USgiXjFfpvU5Q7QWpiCapfAaEpevRqieGzRjSbPy5Frm3XT7v+hWbFnvIJqUPj
 5/SMV8I4qtKQe15Qah292HB//oaFM/AvRtHWvQkre3YIqFwyCYimQtjqoRCYC1E=
 =x0ub
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc, virtio enhancements

Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (28 commits)
  acpi: update expected files for memory unplug
  virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi
  virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net
  pci: Merge pci_nic_init() into pci_nic_init_nofail()
  acpi: add a missing backslash to the \_SB scope.
  qmp-event: add event notification for memory hot unplug error
  acpi: add hardware implementation for memory hot unplug
  acpi: fix "Memory device control fields" register
  acpi: extend aml_field() to support UpdateRule
  acpi, mem-hotplug: add unplug cb for memory device
  acpi, mem-hotplug: add unplug request cb for memory device
  acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus
  docs: update documentation for memory hot unplug
  virtio: coding style tweak
  pci: remove hard-coded bar size in msix_init_exclusive_bar()
  virtio-pci: speedup MSI-X masking and unmasking
  virtio: introduce vector to virtqueues mapping
  virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue
  monitor: check return value of qemu_find_net_clients_except()
  monitor: replace the magic number 255 with MAX_QUEUE_NUM
  ...

Conflicts:
	hw/s390x/s390-virtio-bus.c

[PMM: fixed conflict in s390_virtio_scsi_properties and
s390_virtio_net_properties arrays; since the result of the
two conflicting patches is to empty the property arrays
completely, the conflict resolution is to remove them entirely.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-11 16:25:33 +01:00
Shannon Zhao
da2f84d127 virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi
So far virtio-scsi-device can't expose host features to guest while
using virtio-mmio because it doesn't set DEFINE_VIRTIO_SCSI_FEATURES on
backend or transport.

The host features belong to the backends while virtio-scsi-pci,
virtio-scsi-s390 and virtio-scsi-ccw set the DEFINE_VIRTIO_SCSI_FEATURES
on transports. But they already have the ability to forward property
accesses to the backend child. So if we move the host features to
backends, it doesn't break the backwards compatibility for them and
make host features work while using virtio-mmio.

Move DEFINE_VIRTIO_SCSI_FEATURES to the backend virtio-scsi. The
transports just sync the host features from backends.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-28 17:44:40 +02:00
Stefan Hajnoczi
786a4ea82e Convert (ffs(val) - 1) to ctz32(val)
This commit was generated mechanically by coccinelle from the following
semantic patch:

@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)

The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc).  Therefore we
don't need to worry about the fact that ctz32(0) == 32.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28 15:36:08 +02:00
Ting Wang
4020db0475 virtio-scsi-dataplane: fix memory leak for VirtIOSCSIVring
VirtIOSCSIVring which allocated in virtio_scsi_vring_init
should be free when dataplane has been stopped or failed to start.

Signed-off-by: Ting Wang <kathy.wangting@huawei.com>
Message-Id: <1427355752-25844-1-git-send-email-kathy.wangting@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-26 14:23:16 +01:00
Paolo Bonzini
0dc40f2851 vmw_pvscsi: use PCI DMA APIs
It is wrong to use address_space_memory directly, because there could be an
IOMMU in the middle.  Passing the entire PVSCSIRingInfo to RS_GET_FIELD
and RS_SET_FIELD makes it easy to go back to the PVSCSIState.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-25 13:38:07 +01:00
Paolo Bonzini
16578c6ffe megasas: use PCI DMA APIs
It is wrong to use address_space_memory directly, because there could be an
IOMMU in the middle.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-25 13:38:07 +01:00