We can now use the CPUClass hook instead of a named function.
Create a static tlb_fill function to avoid other changes within
cputlb.c. This also isolates the asserts within. Remove the
named tlb_fill function from all of the targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-ppc@nongnu.org
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Performing a complete flush is ~ 100 times faster than flushing
256MiB of 4KiB pages. Set a limit of 1024 pages and perform a complete
flush afterwards.
This patch significantly speeds up AIX 5.1 and NetBSD-ofppc.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Message-Id: <1555103178-21894-4-git-send-email-atar4qemu@gmail.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The various dump_mmu() take an fprintf()-like callback and a FILE * to
pass to it, and so do their helper functions. Passing around callback
and argument is rather tiresome.
Most dump_mmu() are called only by the target's hmp_info_tlb(). These
all pass monitor_printf() cast to fprintf_function and the current
monitor cast to FILE *.
SPARC's dump_mmu() gets also called from target/sparc/ldst_helper.c a
few times #ifdef DEBUG_MMU. These calls pass fprintf() and stdout.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-11-armbru@redhat.com>
Now that LPCR:HR is set properly for SPAPR, use it for deciding
the translation type, which also works for bare metal
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190215170029.15641-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some debug stuff we don't need to keep there
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190128094625.4428-7-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
External PID is a mechanism present on BookE 2.06 that enables application to
store/load data from different address spaces. There are special version of some
instructions, which operate on alternate address space, which is specified in
the EPLC/EPSC regiser.
This implementation uses two additional MMU modes (mmu_idx) to provide the
address space for the load and store instructions. The QEMU TLB fill code was
modified to recognize these MMU modes and use the values in EPLC/EPSC to find
the proper entry in he PPC TLB. These two QEMU TLBs are also flushed on each
write to EPLC/EPSC.
Following instructions are implemented: dcbfep dcbstep dcbtep dcbtstep dcbzep
dcbzlep icbiep lbepx ldepx lfdepx lhepx lwepx stbepx stdepx stfdepx sthepx
stwepx.
Following vector instructions are not: evlddepx evstddepx lvepx lvepxl stvepx
stvepxl.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There is no known available OS for ppc around anymore that uses page
sizes below 4k, so it does not make much sense that we keep wasting
our time on building and testing the ppcemb-softmmu target. It has
been deprecated since two releases, and nobody complained, so let's
remove this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20180625124238.25339-33-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Partition Table Control Register (PTCR) is a hypervisor privileged
SPR. It contains the host real address of the Partition Table and its
size.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These macros were introduced to deal with the fact that the mmu_model
field has bit flags mixed in with what's otherwise an enum of various mmu
types.
We've now eliminated all those flags except for one, and that one -
POWERPC_MMU_64 - is already included/compared in the MMU_VER macros. So,
we can get rid of those macros and just directly compare mmu_model values
in the places it was used.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
The MC68040 MMU provides the size of the access that
triggers the page fault.
This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.
So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().
To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.
This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
When overwritting a valid TLB entry with a new one, the previous page
were not flushed in QEMU TLB, leading to incoherent mapping. This commit
fixes this.
Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some OS don't populate the TSIZE field when using a fixed size TLB which result
in a 1KB TLB. When the TLB is a fixed size TLB the TSIZE field should be
ignored.
Fix this wrong behavior with MAV 2.0.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a tlb instruction miss happen, rw is set to 0 at the bottom
of cpu_ppc_handle_mmu_fault which cause the MAS update function to miss
the SAS and TS bit in MAS6, MAS1 in booke206_update_mas_tlb_miss.
Just calling booke206_update_mas_tlb_miss with rw = 2 solve the issue.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In target/ppc/mmu-hash64.c there already exists the function
ppc_hash64_get_phys_page_debug() to get the physical (real) address for
a given effective address in hash mode.
Implement the function ppc_radix64_get_phys_page_debug() to allow a real
address to be obtained for a given effective address in radix mode.
This is used when a debugger is attached to qemu.
Previously we just had a comment saying this is unimplemented which then
fell through to the default case and caused an abort due to
unrecognised mmu model as the default had no case for the V3 mmu, which
was misleading at best.
We reuse ppc_radix64_walk_tree() which is used by the radix fault
handler since the process of walking the radix tree is identical.
Reported-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PPC MMU types are sometimes treated as if they were a bit field
and sometime as if they were an enum which causes maintenance
problems: flipping bits in the MMU type (which is done on both the 1TB
segment and 64K segment bits) currently produces new MMU type
values that are not handled in every "switch" on it, sometimes causing
an abort().
This patch provides some macros that can be used to filter out the
"bit field-like" bits so that the remainder of the value can be
switched on, like an enum. This allows removal of all of the
"degraded" types from the list and should ease maintenance.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a new mmu fault handler for the POWER9 cpu and add it as the handler
for the POWER9 cpu definition.
This handler checks if the guest is radix or hash based on the value in the
partition table entry and calls the correct fault handler accordingly.
The hash fault handling code has also been updated to check if the
partition is using segment tables.
Currently only legacy hash (no segment tables) is supported.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
SDR_64_HTABORG, which indicates the bits of the SDR1 register to use for
the base of a 64-bit machine's hashed page table (HPT) isn't correct. It
includes the top 46 bits of the register, but in fact the top 4 bits must
be zero (according to the ISA v2.07). No actual implementation has
supported close to 2^60 bytes of physical address space, so it's kind of
irrelevant, but we might as well correct this.
In addition, although we checked for bad size values in SDR1, we never
reported an error if entirely invalid bits were set there. Add this check
to ppc_store_sdr1().
Reported-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The function ppc_hash64_set_sdr1 basically checked the htabsize and set an
error if it was too big, otherwise it just stored the value in SPR_SDR1.
Given that the only function which calls ppc_hash64_set_sdr1() is
ppc_store_sdr1(), why not handle the checking in ppc_store_sdr1() to avoid
the extra function call. Note that ppc_store_sdr1() already stores the
value in SPR_SDR1 anyway, so we were doing it twice.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Remove unnecessary error temporary]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pseries machine type implements the behaviour of a PAPR compliant
hypervisor, without actually executing such a hypervisor on the virtual
CPU. To do this we need some hooks in the CPU code to make hypervisor
facilities get redirected to the machine instead of emulated internally.
For hypercalls this is managed through the cpu->vhyp field, which points
to a QOM interface with a method implementing the hypercall.
For the hashed page table (HPT) - also a hypervisor resource - we use an
older hack. CPUPPCState has an 'external_htab' field which when non-NULL
indicates that the HPT is stored in qemu memory, rather than within the
guest's address space.
For consistency - and to make some future extensions easier - this merges
the external HPT mechanism into the vhyp mechanism. Methods are added
to vhyp for the basic operations the core hash MMU code needs: map_hptes()
and unmap_hptes() for reading the HPT, store_hpte() for updating it and
hpt_mask() to retrieve its size.
To match this, the pseries machine now sets these vhyp fields in its
existing vhyp class, rather than reaching into the cpu object to set the
external_htab field.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
CPUPPCState includes fields htab_base and htab_mask which store the base
address (GPA) and size (as a mask) of the guest's hashed page table (HPT).
These are set when the SDR1 register is updated.
Keeping these in sync with the SDR1 is actually a little bit fiddly, and
probably not useful for performance, since keeping them expands the size of
CPUPPCState. It also makes some upcoming changes harder to implement.
This patch removes these fields, in favour of calculating them directly
from the SDR1 contents when necessary.
This does make a change to the behaviour of attempting to write a bad value
(invalid HPT size) to the SDR1 with an mtspr instruction. Previously, the
bad value would be stored in SDR1 and could be retrieved with a later
mfspr, but the HPT size as used by the softmmu would be, clamped to the
allowed values. Now, writing a bad value is treated as a no-op. An error
message is printed in both new and old versions.
I'm not sure which behaviour, if either, matches real hardware. I don't
think it matters that much, since it's pretty clear that if an OS writes
a bad value to SDR1, it's not going to boot.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
The Book-E TLB matching process should bail out early when a TLB
entry matches, but the access permissions are wrong. The CPU
will then raise a DSI error instead of a Data TLB error, as
described for TLB matching in Freescale and IBM documents.
Signed-off-by: Alex Zuepke <azu@sysgo.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER9 processors implement the mmu as defined in version 3.00 of the ISA.
Add a definition for this mmu model and set the POWER9 cpu model to use
this mmu model.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We have never has the concept of global TLB entries which would avoid
the flush so we never actually use this flag. Drop it and make clear
that tlb_flush is the sledge-hammer it has always been.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[DG: ppc portions]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
