Commit Graph

177 Commits

Author SHA1 Message Date
Dr. David Alan Gilbert
11cf1d984b MIG_CMD_PACKAGED: Send a packaged chunk of migration stream
MIG_CMD_PACKAGED is a migration command that wraps a chunk of migration
stream inside a package whose length can be determined purely by reading
its header.  The destination guarantees that the whole MIG_CMD_PACKAGED
is read off the stream prior to parsing the contents.

This is used by postcopy to load device state (from the package)
while leaving the main stream free to receive memory pages.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10 15:00:26 +01:00
Dr. David Alan Gilbert
093e3c4296 Add wrappers and handlers for sending/receiving the postcopy-ram migration messages.
The state of the postcopy process is managed via a series of messages;
   * Add wrappers and handlers for sending/receiving these messages
   * Add state variable that track the current state of postcopy

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10 15:00:26 +01:00
Dr. David Alan Gilbert
2e37701efd Return path: Control commands
Add two src->dest commands:
   * OPEN_RETURN_PATH - To request that the destination open the return path
   * PING - Request an acknowledge from the destination

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10 15:00:25 +01:00
Dr. David Alan Gilbert
c76ca1888f Migration commands
Create QEMU_VM_COMMAND section type for sending commands from
source to destination.  These commands are not intended to convey
guest state but to control the migration process.

For use in postcopy.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10 15:00:25 +01:00
Dr. David Alan Gilbert
a3e06c3d13 Rename save_live_complete to save_live_complete_precopy
In postcopy we're going to need to perform the complete phase
for postcopiable devices at a different point, start out by
renaming all of the 'complete's to make the difference obvious.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10 14:51:49 +01:00
Dr. David Alan Gilbert
038629a699 Provide runtime Target page information
The migration code generally is built target-independent, however
there are a few places where knowing the target page size would
avoid artificially moving stuff into migration/ram.c.

Provide 'qemu_target_page_bits()' that returns TARGET_PAGE_BITS
to other bits of code so that they can stay target-independent.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10 14:51:48 +01:00
Liang Li
ea7415fac6 migration: rename qemu_savevm_state_cancel
The function qemu_savevm_state_cancel is called after the migration
in migration_thread, it seems strange to 'cancel' it after completion,
rename it to qemu_savevm_state_cleanup looks better.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
2015-11-04 13:40:13 +01:00
Eduardo Habkost
3b53e45f43 machine: Eliminate QEMUMachine and qemu_register_machine()
The struct is not used anymore and can be eliminated.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-09-19 16:40:30 +02:00
Andrey Smetanin
5f5b5942d5 Added generic panic handler qemu_system_guest_panicked()
There are pieces of guest panic handling code
that can be shared in one generic function.
These code replaced by call qemu_system_guest_panicked().

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-10-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-07 18:14:03 +02:00
Juan Quintela
5e0f1940ca runstate: Add runstate store
This allows us to store the current state to send it through migration.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-07-07 14:54:51 +02:00
Leon Alrae
cfe67cef48 semihosting: create SemihostingConfig structure and semihost.h
Remove semihosting_enabled and semihosting_target and replace them with
SemihostingConfig structure containing equivalent fields. The structure
is defined in vl.c where it is actually set.

Also introduce separate header file include/exec/semihost.h allowing to
access semihosting config related stuff from target specific semihosting
code.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1434643256-16858-2-git-send-email-leon.alrae@imgtec.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 14:17:45 +01:00
Peter Maydell
93f6d1c160 virtio-gpu: pci support bits and virtio-vga.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJVfss3AAoJEEy22O7T6HE4gw8P/Az+6M0I6RRGoavyfC+Um1sy
 hD1VVFI34eLKxAgUupuwDMxnyXuZBbV0BZvyz46GucfcpsC038WCclIAQU50coF+
 CiVlFY2pAlwp1/wS0k+MeDa5cypsCik9Jl1vaDhgNsDlRhLgztOrgTk+fe+AFVoH
 iiLb0baENGWrgMDd8ZN9hcNbJCzBBUQ7MMkuFHZkdRx829L8yuTbCoP0tNXAuQDz
 DCcAtdt6Xm4h0NUDLFSf7CnpaWzV5WgpSPkGCYaWtmJNpxNshrkm+vFRdBHvWnhN
 Vz/2E9q1aMoSbfmnj36RhGeS37g1gAO73souDJd/LRtrk5aF1aPeWN9DGEMTTYWn
 6FNIo63v86V4kcuYxNzup5+d0A+t0aqkTFHcNrKAIvtGNTDmaCIBso1HGJud3rcA
 Rujgytbr3PpxZcJFxIzXZtTlNAHE+wwzzbdS9zaQy1l//oNIXswboJBMTHbJq6Ql
 eit+MDVrILiRcd+DviRmsTQBMRs/VlW2bHHfmgw3DvgxreyTGbR8qZKKzvGuF8Dn
 b6ODQ7Y12uUZJaytiB2SyiPNx/u7Axg1IP1w+9TVrtNONx1VSKn2aGpILYqmH1CG
 zTdgTTlWtYwLEs/tZxKHxeVZK6wlzKkc+jT259Ah57bJchzndoKCrnQ80GirdZfL
 bnMgCL2ju6Xv3A3Yn3wY
 =jnEv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20150615-1' into staging

virtio-gpu: pci support bits and virtio-vga.

# gpg: Signature made Mon Jun 15 13:55:19 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vga-20150615-1:
  virtio-vga: add vgabios configuration
  virtio-vga: add '-vga virtio' support
  virtio-vga: add virtio gpu device with vga compatibility
  virtio-gpu-pci: add virtio pci support
  virtio-gpu: fix error message

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-16 10:35:43 +01:00
Gerd Hoffmann
a94f0c5ca2 virtio-vga: add '-vga virtio' support
Some convinience fluff:  Add support for '-vga virtio', also add
virtio-vga to the list of vga cards so '-device virtio-vga' will
turn off the default vga.

Written by Dave Airlie and Gerd Hoffmann.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-12 10:13:23 +02:00
Dr. David Alan Gilbert
f796baa1b3 Split header writing out of qemu_savevm_state_begin
Split qemu_savevm_state_begin to:
  qemu_savevm_state_header   That writes the initial file header.
  qemu_savevm_state_begin    That sets up devices and does the first
                             device pass.

Used later in postcopy.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12 06:54:01 +02:00
Peter Maydell
d6688ba17b pc, acpi, virtio, tpm
This includes pxb support by Marcel, as well as multiple enhancements all over
 the place.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVcC2WAAoJECgfDbjSjVRpwgcH/3mvFP3UmvmXyzf8mYtQ/1fR
 ikvdTGHl2DR7TMQszNeCJn/p6NgH3oXRbXh39xM1xl9D2/dsZH9o1cUyFE04K9LK
 am0cTmlty1OEyFN8BX1TtpngUxa5mpRA/+NYuWbh1FoTp6RoEPM6P+L1zLqtXYn1
 REF++ehrsQI2Az2pibf4nul8bwuTWJLJeMS6TcCVCRGoaHsCESiVMu2sQrzEbWEW
 E8ZWaXaiycLxLkW0/oU8BmZyrAk1PHdHwgbMUINV0kV5E2u+ZU+3KY79ezC2FyHW
 NV7G9Rhh/5H828/cB6UP4CPZ4AYIYmg02iz5XBGKbd8WS9oPrJVK7EoqfU3oZfc=
 =5AmP
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc, acpi, virtio, tpm

This includes pxb support by Marcel, as well as multiple enhancements all over
the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu Jun  4 11:51:02 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (28 commits)
  vhost: logs sharing
  hw/acpi: piix4_pm_init(): take fw_cfg object no more
  hw/acpi: move "etc/system-states" fw_cfg file from PIIX4 to core
  hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4"
  pc-dimm: don't assert if pc-dimm alignment != hotpluggable mem range size
  docs: Add PXB documentation
  apci: fix PXB behaviour if used with unsupported BIOS
  hw/pxb: add numa_node parameter
  hw/pci: add support for NUMA nodes
  hw/pxb: add map_irq func
  hw/pci: inform bios if the system has extra pci root buses
  hw/pci: introduce PCI Expander Bridge (PXB)
  hw/pci: removed 'rootbus nr is 0' assumption from qmp_pci_query
  hw/acpi: remove from root bus 0 the crs resources used by other buses.
  hw/acpi: add _CRS method for extra root busses
  hw/apci: add _PRT method for extra PCI root busses
  hw/acpi: add support for i440fx 'snooping' root busses
  hw/pci: extend PCI config access to support devices behind PXB
  hw/i386: query only for q35/pc when looking for pci host bridge
  hw/pci: made pci_bus_num a PCIBusClass method
  ...

Conflicts:
	hw/i386/pc_piix.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-04 18:33:24 +01:00
Marcel Apfelbaum
6a3042b23b hw/pci: add support for NUMA nodes
PCI root buses can be attached to a specific NUMA node.
PCI buses are not attached by default to a NUMA node.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2015-06-03 18:19:18 +02:00
Markus Armbruster
04e00c92ef monitor: Use trad. command interface for HMP pcie_aer_inject_error
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one.  Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.

pcie_aer_inject_error's implementation is split into the
hmp_pcie_aer_inject_error() and pcie_aer_inject_error_print().  The
former is a peculiar crossbreed between HMP and QMP handler.  On
success, it works like a QMP handler: store QDict through ret_data
parameter, return 0.  Printing the QDict is left to
pcie_aer_inject_error_print().  On failure, it works more like an HMP
handler: print error to monitor, return negative number.

To convert to the traditional interface, turn
pcie_aer_inject_error_print() into a command handler wrapping around
hmp_pcie_aer_inject_error().  By convention, this command handler
should be called hmp_pcie_aer_inject_error(), so rename the existing
hmp_pcie_aer_inject_error() to do_pcie_aer_inject_error().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 09:59:13 +02:00
Gerd Hoffmann
da076ffed6 configure: opengl overhaul
Rename config option from "glx" to "opengl", glx will not be the only
option for opengl in near future.  Also switch over to pkg-config for
opengl support detection.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-03-12 15:49:57 +01:00
Peter Maydell
0048fa6c80 pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
 All of ACPI refactoring has been merged.
 Legacy pci commands have been dropped.
 virtio header cleanup
 initial patches from virtio-1.0 branch
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
 kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
 MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
 WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
 HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
 w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
 =LY/j
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio fixes and cleanups

A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (130 commits)
  acpi: drop unused code
  aml-build: comment fix
  acpi-build: fix typo in comment
  acpi: update generated files
  vhost user:support vhost user nic for non msi guests
  aml-build: fix build for glib < 2.22
  acpi: update generated files
  Makefile.target: binary depends on config-devices
  acpi-test-data: update after pci rewrite
  acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
  pci-hotplug-old: Has been dead for five major releases, bury
  pci: Give a few helpers internal linkage
  acpi: make build_*() routines static to aml-build.c
  pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
  pc: acpi-build: drop template patching and create PCI bus tree dynamically
  tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
  pc: acpi-build: simplify PCI bus tree generation
  tests: add ACPI blobs for qemu with bridge cases
  tests: bios-tables-test: add support for testing bridges
  tests: ACPI test blobs update due to PCI0._CRS changes
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Conflicts:
	hw/pci/pci-hotplug-old.c
2015-03-09 09:14:28 +00:00
Peter Maydell
2dffe5516e NUMA fixes queue
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJU639qAAoJECgHk2+YTcWmIC0QAK36G9LpeDOJONxt7LNOCMes
 Oplwp11RRA5zs5YHVCzTL0NMZEf59xRs/35r1iIrt238clmFGpUdZRpdlsZdDMZL
 ThwxgrV7/aZH/+HyZVSTCh5FL+fTyl+DjVQ1cZqNUWQRQ6KO2AjSxA53gCoFEZ+L
 1Vg6A41u1UOdO3tMOosuDcZtkN4fXevHTuIFFzfzW4WhJuctU2P/VPsHKxESKxYH
 1Kz0S9CCr6meIqZ8DE9y5qhCUdXBj9VYbEY2JZUYVaeB8q+smY7Lz1cV7MABrD3T
 EoJa3/53b4DFl4wNkLJsuqQNFHiOrQadgmbhocgEYp3u96/7cKa+pZ8mTKgvZ14D
 kxtpcL1TeiyA3b7UfITPhqLY3mKvN7UIKh/vo0haAxj5B3H6QhemkO76oA1/zkJR
 zI3mm6trnxurZm1gBtkZwPbKoDi7OuS7lYxW3GT7K5nJBMCEAbFGXFzmoHomVDVZ
 phYGwihzUg/LWMwaZRT0bbUd2GOVAXGY7Zy9Kg0p8nvPtcEYDwp0spQDfyrnwEWu
 Bohi80x97ayRXrvY1mP5mdYg1Jj8jR4qPdwnoW6M2UHXvtdQsjfFoSj4/xbVMCb9
 l5y1vH+DHG/ZNQB0URjBoXmttWkZjpbiAbo0daPFDaZ1QRfdXx6JgdkTKtA8ozQ9
 Xvh4hVGPeLAPvRjzaesa
 =0V2i
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/numa-pull-request' into staging

NUMA fixes queue

# gpg: Signature made Mon Feb 23 19:28:42 2015 GMT using RSA key ID 984DC5A6
# gpg: Can't check signature: public key not found

* remotes/ehabkost/tags/numa-pull-request:
  numa: Rename set_numa_modes() to numa_post_machine_init()
  numa: Rename option parsing functions
  numa: Move QemuOpts parsing to set_numa_nodes()
  numa: Make max_numa_nodeid static
  numa: Move NUMA globals to numa.c
  vl.c: Remove unnecessary zero-initialization of NUMA globals
  numa: Move NUMA declarations from sysemu.h to numa.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-02 12:13:45 +00:00
Markus Armbruster
f51074cdc6 pci-hotplug-old: Has been dead for five major releases, bury
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP
commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make
variable, not as preprocessor macro, killing the code conditional on
defined(CONFIG_PCI_HOTPLUG_OLD).

In all this time, nobody reported the loss.  I only noticed it when I
tried to test some error reporting change that forced me to touch this
old crap again.

Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward
compatibility god has been strong enough to sacrifice at its altar
about a dozen times, but not strong enough to even once verify the
legacy feature's still there, let alone works.

Remove the commands along with the code backing them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-01 12:37:54 +01:00
Eduardo Habkost
e35704ba9c numa: Move NUMA declarations from sysemu.h to numa.h
Not all sysemu.h users need the NUMA declarations, and keeping them in a
separate file makes it easier to see what are the interfaces provided by
numa.c.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23 15:39:27 -03:00
Markus Armbruster
1ce6be24df hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.

Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.

Exceptions:

* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
  sun4m_hmp_info_pic().

* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
  lm32_hmp_info_pic().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:50 +01:00
Markus Armbruster
3e5a50d64c hmp: Name HMP command handler functions hmp_COMMAND()
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.

Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.

Exceptions:

* do_device_add() and client_migrate_info() *not* renamed to
  hmp_device_add(), hmp_client_migrate_info(), because they're also
  QMP handlers.  They still need to be converted to QAPI.

* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
  do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
  hmp_i(), hmp_o(), because those names are too cryptic for my taste.

* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
  because it only covers help.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:30 +01:00
Markus Armbruster
08d15d6c23 hmp: Clean up declarations for long-gone info handlers
Leftovers from
d1f2964 qapi: Convert query-spice
791e7c8 qapi: Convert query-migrate
0fe6a7f slirp: Drop statistic code

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:21 +01:00
Marcel Apfelbaum
de77a243b3 hw/usb: simplified usb_enabled
The argument is not longer used and the implementation
uses now QOM instead of QemuOpts.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-4-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-08 17:32:27 +00:00
Marcel Apfelbaum
f8b6f8edac hw/ppc: modified the condition for usb controllers to be created for some ppc machines
Some ppc machines create a default usb controller based on a 'machine condition'.
Until now the logic was: create the usb controller if:
 -  the usb option was supplied in cli and value is true or
 -  the usb option was absent and both set_defaults and the machine
    condition were true.

Modified the logic to:
Create the usb controller if:
 - the machine condition is true and defaults are enabled or
 - the usb option is supplied and true.

The main for this is to simplify the usb_enabled method.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-2-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-08 17:32:27 +00:00
Gonglei
ddcd55316f bootdevice: add Error **errp argument for QEMUBootSetHandler
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.
For x86 architecture, we pass &local_err to set_boot_dev()
when vm startup in pc_coms_init().

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-12-22 14:39:21 +08:00
Gonglei
f1839938b0 bootdevice: add Error **errp argument for qemu_boot_set()
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-12-22 14:39:20 +08:00
Gonglei
703008e81a bootdevice: add Error **errp argument for validate_bootdevices()
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-12-22 14:39:20 +08:00
Gonglei
9816833d3b bootdevice: move code about bootorder from vl.c to bootdevice.c
First, we can downsize vl.c, make it simpler by
little and little. Second, I can maintain those code
and make some improvement.

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-12-22 14:39:20 +08:00
Peter Maydell
776346cd63 trivial patches for 2014-11-11
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJUYh9vAAoJEL7lnXSkw9fbgPQH/065L5+SpaJR1Nte9Lz3N2s1
 a6tGSI22yu85tKvYCdYjeoVHSkSTyR57FdTfUd2xc2QPj+J4sWXpA81KILBGTJUp
 NMpmLpWg4LOh8Ek4ViRgmFFdryzIFa4dT4gc1AcSAIAQ6jsgK1dM7m5kfncC3TN0
 TUs248vJ2i/DaE0k8TOeJqxJTqInoFttlJEqG7RD+V5JznokE4zpFNXHDGx9BptE
 W2J38GJ/TKRPe9UrHMKZI1r6+ZBdXyE/CaqsNNKLJdqrHgSQuAyK/PS6dQbM4BLg
 M1qdP7Tp0wOlvv9qoEZMOEiUsi54XPqLgaLMbW74Yp5X459fqmLW2imy49pHXt8=
 =klsW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-11' into staging

trivial patches for 2014-11-11

# gpg: Signature made Tue 11 Nov 2014 14:38:39 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2014-11-11:
  block: Fix comment for bdrv_co_get_block_status
  sysbus: Correct SYSTEM_BUS(obj) defines
  target-i386: cpu: keeping function parameters alignment on new line
  xen-hvm: Remove redundant variable 'xstate'
  coroutine-sigaltstack: Change jmp_buf to sigjmp_buf
  pc-bios: petalogix-s3adsp1800.dtb: Use 'xlnx, xps-ethernetlite-2.00.a' instead of 'xlnx, xps-ethernetlite-2.00.b'
  gdbstub: Add a missing case of signal number translation in gdbstub
  numa: make 'info numa' take into account hotplugged memory
  slirp/smbd: modify/set several parameters in generated smbd.conf
  qemu-doc.texi: fix typos in x509 examples
  icc_bus: fix typo ICC_BRIGDE -> ICC_BRIDGE

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-11 14:50:10 +00:00
zhanghailiang
5b009e4008 numa: make 'info numa' take into account hotplugged memory
When do memory hotplug, if there is numa node, we should add
the memory size to the corresponding node memory size.

It affects the result of hmp command "info numa".

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-11-11 08:50:58 +03:00
Gu Zheng
fcd702e17a qom/cpu: remove the unused CPU hot-plug notifier
Remove the unused CPU hot-plug notifier.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2014-11-02 13:44:11 +02:00
Gonglei
12da309778 bootindex: add a setter/getter functions wrapper for bootindex property
when we remove bootindex form qdev.property to qom.property,
we can use those functions set/get bootindex property for all
correlative devices. Meanwhile set the initial value of
bootindex to -1.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 09:52:47 +02:00
Gonglei
9d27572d62 bootindex: add del_boot_device_path function
Introduce del_boot_device_path() to clean up fw_cfg content when
hot-unplugging a device that refers to a bootindex or update a
existent devcie's bootindex.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Chenliang <chenliang88@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 09:49:48 +02:00
Gonglei
694fb857ab bootindex: add check bootindex function
Determine whether a given bootindex exists or not.
If exists, we report an error.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 09:49:48 +02:00
Gonglei
bc74112f7e bootdevice: move bootdevice related code to new file bootdevice.c
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 09:49:48 +02:00
Eduardo Habkost
1af878e049 numa: Keep track of NUMA nodes present on the command-line
Based on "enable sparse node numbering" patch from Nishanth Aravamudan,
but without the code to actually support sparse node IDs. This just adds
the code to keep track of present/non-present nodes on the command-line,
without changing any behavior.

Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
[Rename max_numa_node to max_numa_nodeid -Eduardo]
[Initialize max_numa_nodeid to 0 -Eduardo]
[Use MAX() macro when setting max_numa_nodeid -Eduardo]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-29 18:59:41 +03:00
Wenchao Xia
e010ad8f1e qapi event: convert RTC_CHANGE
This patch also eliminates build time warning caused by no caller
of monitor_qapi_event_throttle().

Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:27 -04:00
Paolo Bonzini
74892d2468 vl: allow other threads to do qemu_system_vmstop_request
There patch protects vmstop_requested with a lock and introduces
qemu_system_vmstop_request_prepare.

Together with the new call to qemu_vmstop_requested in vm_start,
qemu_system_vmstop_request_prepare avoids a race where the VM could remain
stopped even though the iostatus of a block device has already been set
(for example).

qemu_system_vmstop_request_prepare however also lets the caller thread
delay observation of the state change until it has itself communicated
that change to the user.  This delay avoids any possibility of a wrong
reordering of the BLOCK_IO_ERROR event and the subsequent STOP event.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-23 16:36:13 +08:00
Paolo Bonzini
7febe36f9a numa: add -numa node,memdev= option
This option provides the infrastructure for binding guest NUMA nodes
to host NUMA nodes.  For example:

 -object memory-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 \
 -numa node,nodeid=0,cpus=0,memdev=ram-node0 \
 -object memory-ram,size=1024M,policy=interleave,host-nodes=1-3,id=ram-node1 \
 -numa node,nodeid=1,cpus=1,memdev=ram-node1

The option replaces "-numa node,mem=".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

MST: conflict resolution
2014-06-19 18:44:19 +03:00
Paolo Bonzini
e1c57ab86f memory: reorganize file-based allocation
Split the internal interface in exec.c to a separate function, and
push the check on mem_path up to memory_region_init_ram.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:19 +03:00
Paolo Bonzini
dfabb8b916 numa: introduce memory_region_allocate_system_memory
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MST: resolve conflicts
2014-06-19 18:44:19 +03:00
Wanlong Gao
45e30bf3a9 NUMA: expand MAX_NODES from 64 to 128
libnuma choosed 128 for MAX_NODES, so we follow libnuma here.

Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:18 +03:00
Wanlong Gao
0042109a6a NUMA: convert -numa option to use OptsVisitor
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:18 +03:00
Wanlong Gao
8c85901ed3 NUMA: Add numa_info structure to contain numa nodes info
Add the numa_info structure to contain the numa nodes memory,
VCPUs information and the future added numa nodes host memory
policies.

Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
[Fix hw/ppc/spapr.c - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:18 +03:00
Wanlong Gao
96d0e26c23 NUMA: move numa related code to new file numa.c
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

MST: comment tweaks
2014-06-19 18:44:18 +03:00
Peter Maydell
90c49ef165 acpi,pc,test bug fixes
More small fixes all over the place.
 Notably fixes for big-endian hosts by Marcel.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTMAvDAAoJECgfDbjSjVRptUEIAMYNC76eQSPNoVv9vP/XaTT1
 c9TE67jo6HfxO7JaHSishyaf0bNrGIske+ua3J4NbiEAHnX22SDjn0o/CmX+tbjb
 n70hpjF+KNgt0SR/Wxsl8nOa+nwsrbrlv/ReN7UehGicH+Af2OR65PZFwKwC3pjF
 nupmucOmCBQzcmWDzx+DgSXulh02bfmpRHJo/EMhg7RXnkdNPnlwh5klycotJVgW
 ggnY9IRuPr1m4Aq4V7wN/I8kIpkcAJxF5RlxdyopsdQtklLItSRi4xiMJlkhIPjA
 lLdkOiFnVFKSggiVy9LFTdQWtGog1H4sVypM6J6Z2zOIKQsJFvHMpCrbcE8+7CY=
 =C8sW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

acpi,pc,test bug fixes

More small fixes all over the place.
Notably fixes for big-endian hosts by Marcel.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 24 Mar 2014 10:41:07 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  tests/acpi-test: do not fail if iasl is broken
  vl.c: Use MAX_CPUMASK_BITS macro instead of hardcoded constant
  sysemu.h: Document what MAX_CPUMASK_BITS really limits
  acpi: fix endian-ness for table ids
  acpi-test: signature endian-ness fixes
  i386/acpi-build: support hotplug of VCPU with APIC ID 0xFF
  acpi-test: rebuild SSDT
  i386/acpi-build: allow more than 255 elements in CPON
  pc: Refuse max_cpus if it results in too large APIC ID
  acpi: Don't use MAX_CPUMASK_BITS for APIC ID bitmap
  acpi: Assert sts array limit on AcpiCpuHotplug_add()
  pc: Refuse CPU hotplug if the resulting APIC ID is too large
  acpi: Add ACPI_CPU_HOTPLUG_ID_LIMIT macro
  acpi-test: update expected SSDT files
  acpi-build: fix misaligned access

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-24 19:00:02 +00:00
Alexey Kardashevskiy
30e32af746 vl.c: Extend get_boot_devices_list() to ignore suffixes
As suffixes do not make sense for sPAPR's device tree and
there is no way to filter them out on the BusState::get_fw_dev_path()
level, let's add an ability for the external caller to specify
whether to apply suffixes or not.

We could handle suffixes in SLOF (ignored for now) but this would require
serious rework in the node opening code in SLOF, which has no obvious
benefit for the currently emulated sPAPR machine.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-20 02:40:07 +01:00
Eduardo Habkost
d2995916ea sysemu.h: Document what MAX_CPUMASK_BITS really limits
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-19 13:24:29 +02:00
Mark Wu
d44229c54f Fix vga_interface_type for command line argument '-device VGA'
Some machine (like pseries) initialization code determines if it has
graphics according to vga_interface_type. In the original code,
vga_interface_type is evaluated to VGA_NONE even if a VGA is added
via '-device VGA'. It causes the machine not aware of the graphics
device configured. Add a new VGA device type to indicate that it has a
VGA device, which will be initialized in QOM device initialization.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 20:53:19 +01:00
Mark Cave-Ayland
af87bf290f sun4m: Add Sun CG3 framebuffer initialisation function
In order to allow the user to choose the framebuffer for sparc-softmmu, add
-vga tcx and -vga cg3 options to the QEMU command line. If no option is
specified, the default TCX framebuffer is used.

Since proprietary FCode ROMs use a resolution of 1152x900, slightly relax the
validation rules to allow both displays to be initiated at the higher
resolution used by these ROMs upon request (OpenBIOS FCode ROMs default to
the normal QEMU sun4m default resolution of 1024x768).

Finally move any fprintf(stderr ...) statements in the areas affected by this
patch over to the new error_report() function.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
2014-02-27 10:01:41 +00:00
Amos Kong
968854c8a1 qmp: access the local QemuOptsLists for drive option
Currently we have three QemuOptsList (qemu_common_drive_opts,
qemu_legacy_drive_opts, and qemu_drive_opts), only qemu_drive_opts
is added to vm_config_groups[].

This patch changes query-command-line-options to access three local
QemuOptsLists for drive option, and merge the description items
together.

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-14 13:09:07 +01:00
Anthony Liguori
eb322b8155 pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
 and a virtio-net bugfix related to softmac programming.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSR83kAAoJECgfDbjSjVRpX08H/jKgYBNJaChev1TROIVHEGbu
 IzvkjfocvKO+6wmhOf5x+xwFmzrijUMa1CPvOkCp8c2A3Iek7rmnedknlhXYh7dM
 z5mXcvFGjnu7ST38ydF/Emk9+Z6rRg5Y/hkmlDyr+9lNcoiCDLXXcUrKjeIHNoWl
 e8w3yiPCJ528QyrLwQ890XetJphv67pMlsjMgLQ2betMk++Ac/ctUf1D2p1X4NeQ
 Q2drbo5Z4yDk0i6QMA3iLq1Bh/AhE10bCDq9rCzfZGIKVyncL6ne2pSi/xDvpLrF
 dmxoiJ5QrK6xLnagCcn5T6SB9DkwbEPdL7qCqlxZ8USr7cVyPdzYtHtGSBWdeXY=
 =xF01
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pc,pci,virtio fixes and cleanups

This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 29 Sep 2013 01:51:16 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin (8) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  smbios: Factor out smbios_maybe_add_str()
  smbios: Make multiple -smbios type= accumulate sanely
  smbios: Improve diagnostics for conflicting entries
  smbios: Convert to QemuOpts
  smbios: Normalize smbios_entry_add()'s error handling to exit(1)
  virtio-net: fix up HMP NIC info string on reset
  pci: remove explicit check to 64K ioport size
  piix4: disable io on reset
  piix: use 64 bit window programmed by guest
  q35: use 64 bit window programmed by guest
  pci: add helper to retrieve the 64-bit range
  range: add min/max operations on ranges
  range: add Range to typedefs
  q35: make pci window address/size match guest cfg

Message-id: 1380437951-21788-1-git-send-email-mst@redhat.com
2013-09-30 17:15:01 -05:00
Markus Armbruster
fc3b32958a smbios: Make multiple -smbios type= accumulate sanely
Currently, -smbios type=T,NAME=VAL,... adds one field (T,NAME) with
value VAL to fw_cfg for each unique NAME.  If NAME occurs multiple
times, the last one's VAL is used (before the QemuOpts conversion, the
first one was used).

Multiple -smbios can add multiple fields with the same (T, NAME).
SeaBIOS reads all of them from fw_cfg, but uses only the first field
(T, NAME).  The others are ignored.

"First one wins, subsequent ones get ignored silently" isn't nice.  We
commonly let the last option win.  Useful, because it lets you
-readconfig first, then selectively override with command line
options.

Clean up -smbios to work the common way.  Accumulate the settings,
with later ones overwriting earlier ones.  Put the result into fw_cfg
(no more useless duplicates).

Bonus cleanup: qemu_uuid_parse() no longer sets SMBIOS system uuid by
side effect.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-28 23:49:39 +03:00
Liu, Jinsong
4bc78a8772 qemu: Adjust qemu wakeup
Currently Xen hvm s3 has a bug coming from the difference between
qemu-traditioanl and qemu-xen. For qemu-traditional, the way to
resume from hvm s3 is via 'xl trigger' command. However, for
qemu-xen, the way to resume from hvm s3 inherited from standard
qemu, i.e. via QMP, and it doesn't work under Xen.

The root cause is, for qemu-xen, 'xl trigger' command didn't reset
devices, while QMP didn't unpause hvm domain though they did qemu
system reset.

We have two qemu patches and one xl patch to fix Xen hvm s3 bug.
This patch is the qemu patch 1. It adjusts qemu wakeup so that
Xen s3 resume logic (which will be implemented at qemu patch 2)
will be notified after qemu system reset.

Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
2013-09-25 16:38:29 +00:00
Paolo Bonzini
5accc8408f scsi: prefer UUID to VM name for the initiator name
The UUID is unique even across multiple hosts, thus it is
better than a VM name even if it is less user-friendly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Alex Bligh
884f17c235 aio / timers: Convert rtc_clock to be a QEMUClockType
Convert rtc_clock to be a QEMUClockType

Move rtc_clock users to use the new API

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Gerd Hoffmann
58ae52a8dc spice: fix display initialization
Spice has two display interface implementations:  One integrated into
the qxl graphics card, and one generic which can operate with every
qemu-emulated graphics card.

The generic one is activated in case spice is used without qxl.  The
logic for that only caught the "-vga qxl" case, "-device qxl-vga" goes
unnoticed.  Fix that by adding a check in the spice interface
registration so we'll notice the qxl card no matter how it is created.

https://bugzilla.redhat.com/show_bug.cgi?id=981094

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-07-30 10:25:47 +02:00
Kevin Wolf
5698346391 cpus: Add return value for vm_stop()
If flushing the block devices fails, return an error. The VM is stopped
anyway.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-15 09:51:38 +02:00
Markus Armbruster
7f9d6e540e vl: New qemu_get_machine_opts()
To be used in the next few commits to fix or clean up queries of
"machine" options (-machine and its sugared forms).

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-09 13:38:57 -05:00
Igor Mammedov
066e9b2710 cpu: Introduce CPU hot-plug notifier
Hot-add CPU event will be distributed to acpi_piix4 and rtc_cmos.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01 13:04:17 +02:00
Michael S. Tsirkin
9f032464c0 sysemu: drop register_devices from header
No user in sight.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20130430094149.GA29094@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-30 16:04:24 -05:00
Hu Tao
ede085b3fe add a new runstate: RUN_STATE_GUEST_PANICKED
The guest will be in this state when it is panicked.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 0255f263ffdc2a3716f73e89098b96fd79a235b3.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-30 10:30:00 -05:00
Dominik Dingel
7dc5af5545 Common: Add quick access to first boot device
Instead of manually parsing the boot_list as character stream,
we can access the nth boot device, specified by the position in the
boot order.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26 20:18:24 +02:00
Paolo Bonzini
47c8c17af8 migration: use qemu_file_set_error to pass error codes back to qemu_savevm_state
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11 13:32:01 +01:00
Anthony Liguori
a4ccabcf6d ui: add basic GTK gui (v5)
This is minimalistic and just contains the basic widget infrastructure.  The GUI
consists of a menu and a GtkNotebook.  To start with, the notebook has its tabs
hidden which provides a UI that looks very similar to SDL with the exception of
the menu bar.

The menu bar allows a user to toggle the visibility of the tabs.  Cairo is used
for rendering.

I used gtk-vnc as a reference.  gtk-vnc solves the same basic problems as QEMU
since it was originally written as a remote display for QEMU.  So for the most
part, the approach to rendering and keyboard handling should be pretty solid for
GTK.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-4-git-send-email-aliguori@us.ibm.com
2013-02-21 16:34:48 -06:00
Hervé Poussineau
87f1361c19 Remove forward declaration of non-existant variable
This variable has been removed 5 years ago in 970ac5a308.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-21 10:33:39 +01:00
Markus Armbruster
d09acb9b5e fw_cfg: Splash image loader can overrun a stack variable, fix
read_splashfile() passes the address of an int variable as size_t *
parameter to g_file_get_contents(), with a cast to gag the compiler.

No problem on machines where sizeof(size_t) == sizeof(int).

Happens to work on my x86_64 box (64 bit little endian): the least
significant 32 bits of the file size end up in the right place
(caller's variable file_size), and the most significant 32 bits
clobber a place that gets assigned to before its next use (caller's
variable file_type).

I'd expect it to break on a 64 bit big-endian box.

Fix up the variable types and drop the problematic cast.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-26 13:23:33 +00:00
Anthony Liguori
016c718231 Merge remote-tracking branch 'quintela/thread.next' into staging
# By Juan Quintela (7) and Paolo Bonzini (6)
# Via Juan Quintela
* quintela/thread.next:
  migration: remove argument to qemu_savevm_state_cancel
  migration: Only go to the iterate stage if there is anything to send
  migration: unfold rest of migrate_fd_put_ready() into thread
  migration: move exit condition to migration thread
  migration: Add buffered_flush error handling
  migration: move beginning stage to the migration thread
  qemu-file: Only set last_error if it is not already set
  migration: fix off-by-one in buffered_rate_limit
  migration: remove double call to migrate_fd_close
  migration: make function static
  use XFER_LIMIT_RATIO consistently
  Protect migration_bitmap_sync() with the ramlist lock
  Unlock ramlist lock also in error case
2013-01-21 13:22:43 -06:00
Markus Armbruster
0e7a759293 vl: Use size_t for sizes in get_boot_devices_list()
Code mixes uint32_t, int and size_t.  Very unlikely to go wrong in
practice, but clean it up anyway.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-19 10:22:48 +00:00
Juan Quintela
6522773f88 migration: remove argument to qemu_savevm_state_cancel
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-17 13:54:52 +01:00
Wenchao Xia
84f2d0ea0f HMP: add QDict to info callback handler
This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-17 10:24:52 -02:00
Paolo Bonzini
4d4545743f qemu-option: move standard option definitions out of qemu-config.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12 17:17:53 +01:00
Juan Quintela
e4ed1541ac savevm: New save live migration method: pending
Code just now does (simplified for clarity)

    if (qemu_savevm_state_iterate(s->file) == 1) {
       vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
       qemu_savevm_state_complete(s->file);
    }

Problem here is that qemu_savevm_state_iterate() returns 1 when it
knows that remaining memory to sent takes less than max downtime.

But this means that we could end spending 2x max_downtime, one
downtime in qemu_savevm_iterate, and the other in
qemu_savevm_state_complete.

Changed code to:

    pending_size = qemu_savevm_state_pending(s->file, max_size);
    DPRINTF("pending size %lu max %lu\n", pending_size, max_size);
    if (pending_size >= max_size) {
        ret = qemu_savevm_state_iterate(s->file);
     } else {
        vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
        qemu_savevm_state_complete(s->file);
     }

So what we do is: at current network speed, we calculate the maximum
number of bytes we can sent: max_size.

Then we ask every save_live section how much they have pending.  If
they are less than max_size, we move to complete phase, otherwise we
do an iterate one.

This makes things much simpler, because now individual sections don't
have to caluclate the bandwidth (it was implossible to do right from
there).

Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-20 23:09:25 +01:00
Paolo Bonzini
9c17d615a6 softmmu: move include files to include/sysemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:45 +01:00