Expected change is that _ADR object is removed from
hostbridge descriptor in DSDT for PC and Q35 machines.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following change is expected on each PCI slot with enabled
ACPI PCI hotplug
- BSEL,
- ASUN
+ Zero,
+ Zero
}
+ Local0 [Zero] = BSEL /* \_SB_.PCI0.BSEL */
+ Local0 [One] = ASUN /* \_SB_.PCI0.S18_.ASUN */
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Postcopy preempt capability is expected to be set before incoming
starts, so change the postcopy tests to start with deferred incoming and
call migrate-incoming after the cap has been set.
Why the existing tests (without this patch) didn't fail?
There could be two reasons:
1) "backlog" specifies the number of pending connections. As long as the
server accepts the connections faster than the clients side connecting,
connection will succeed. For the preempt test, it uses only 2 channels,
so very likely to not have pending connections.
2) per my tests (on kernel 6.2), the number of pending connections allowed
is actually "backlog + 1", which is 2 in this case.
That said, the implementation of socket_start_incoming_migration_internal
expects "migrate defer" to be used, and for safety, change the test to
work with the expected usage.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230606101910.20456-3-wei.w.wang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
And it needs to be in both source and target, so put it on arch_opts.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-7-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This will contain the options needed for both source and target.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It makes no sense that we don't have the same configuration on both sides.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-ID: <20230608224943.3877-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This wasn't noticed because the test is currently disabled.
Fixes: 02f56e3de ("tests/qtest: massively speed up migration-test")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230711212131.2370-1-farosas@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
cleanups, fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
=RsOh
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pc,pci,virtio: cleanups, fixes, features
vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
cleanups, fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
# qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
# D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
# n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
# cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
# UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
# =RsOh
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 11 Jul 2023 12:00:19 AM BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (66 commits)
vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQ
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA feature
vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQ
vdpa: Avoid forwarding large CVQ command failures
vdpa: Accessing CVQ header through its structure
vhost: Fix false positive out-of-bounds
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX feature
vdpa: Restore MAC address filtering state
vdpa: Use iovec for vhost_vdpa_net_load_cmd()
pcie: Specify 0 for ARI next function numbers
pcie: Use common ARI next function number
include/hw/virtio: document some more usage of notifiers
include/hw/virtio: add kerneldoc for virtio_init
include/hw/virtio: document virtio_notify_config
hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX comments
include/hw: document the device_class_set_parent_* fns
include: attempt to document device_class_set_props
vdpa: Fix possible use-after-free for VirtQueueElement
pcie: Add hotplug detect state register to cmask
virtio-iommu: Rework the traces in virtio_iommu_set_page_size_mask()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The test attaches a SCSI controller to a non-zero slot and a pcie-to-pci bridge
on slot 0 on the same pcie-root-port. Since a downstream device can be attached
to a pcie-root-port only on slot 0, the above test configuration is not allowed.
Additionally using pcie.0 as id for pcie-to-pci bridge is incorrect as that id
is reserved only for the root bus.
In the test scenario, there is no need to attach a pcie-root-port to the
root complex. A SCSI controller can be attached to a pcie-to-pci bridge
which can then be directly attached to the root bus (pcie.0).
Fix the test and simplify it.
CC: mst@redhat.com
CC: imammedo@redhat.com
CC: Michael Labiuk <michael.labiuk@virtuozzo.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230705115925.5339-5-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCIE ports only have one slot, slot 0. Hence, non-zero slots are not available
for PCIE devices on PCIE root ports. Fix test_acpi_q35_tcg_no_acpi_hotplug()
so that the test does not use them.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230705115925.5339-3-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are going to fix bio-tables-test in the next patch and hence need to
make sure the acpi tests continue to pass.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230705115925.5339-2-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
+3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
=3XFD
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 8.1
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
# gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
# +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
# vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
# KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
# bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
# nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
# ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
# ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
# TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
# XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
# ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
# =3XFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits)
riscv: Add support for the Zfa extension
target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM
target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper
target/riscv: update multi-letter extension KVM properties
target/riscv/cpu.c: create KVM mock properties
target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext()
target/riscv/cpu.c: add satp_mode properties earlier
target/riscv/kvm.c: add multi-letter extension KVM properties
target/riscv/kvm.c: update KVM MISA bits
target/riscv: add KVM specific MISA properties
target/riscv/cpu: add misa_ext_info_arr[]
target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU
target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs
target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids()
target/riscv: use KVM scratch CPUs to init KVM properties
target/riscv/cpu.c: restrict 'marchid' value
target/riscv/cpu.c: restrict 'mimpid' value
target/riscv/cpu.c: restrict 'mvendorid' value
hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set
target/riscv: skip features setup for KVM CPUs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't have a virtio-scmi implementation in QEMU and only support a
vhost-user backend. This is very similar to virtio-gpio and we add the same
set of tests, just passing some vhost-user messages over the control socket.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230628100524.342666-4-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The migration test cases that actually exercise live migration want to
ensure there is a minimum of two iterations of pre-copy, in order to
exercise the dirty tracking code.
Historically we've queried the migration status, looking for the
'dirty-sync-count' value to increment to track iterations. This was
not entirely reliable because often all the data would get transferred
quickly enough that the migration would finish before we wanted it
to. So we massively dropped the bandwidth and max downtime to
guarantee non-convergance. This had the unfortunate side effect
that every migration took at least 30 seconds to run (100 MB of
dirty pages / 3 MB/sec).
This optimization takes a different approach to ensuring that a
mimimum of two iterations. Rather than waiting for dirty-sync-count
to increment, directly look for an indication that the source VM
has dirtied RAM that has already been transferred.
On the source VM a magic marker is written just after the 3 MB
offset. The destination VM is now montiored to detect when the
magic marker is transferred. This gives a guarantee that the
first 3 MB of memory have been transferred. Now the source VM
memory is monitored at exactly the 3MB offset until we observe
a flip in its value. This gives us a guaranteed that the guest
workload has dirtied a byte that has already been transferred.
Since we're looking at a place that is only 3 MB from the start
of memory, with the 3 MB/sec bandwidth, this test should complete
in 1 second, instead of 30 seconds.
Once we've proved there is some dirty memory, migration can be
set back to full speed for the remainder of the 1st iteration,
and the entire of the second iteration at which point migration
should be complete.
On a test machine this further reduces the migration test time
from 8 minutes to 1 minute 40.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-11-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test that we can successfully parse the docs/config/q35-emulated.cfg,
docs/config/q35-virtio-graphical.cfg and docs/config/q35-virtio-serial.cfg
config files (the "...-serial.cfg" file is a subset of the graphical
config file, so we skip that in quick mode).
These config files use two hard-coded image names which we have to
replace with unique temporary files to avoid race conditions in case
the tests are run in parallel. So after creating the temporary image
files, we also have to create a copy of the config file where we
replaced the hard-coded image names.
If KVM is not available, we also have to disable the "accel" lines.
Once everything is in place, we can start QEMU with the modified
config file and check that everything is available in QEMU.
Message-Id: <20230704071655.75381-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These two functions can be useful for other qtests beside the
qos-test, too, so move them to libqtest instead.
Message-Id: <20230704071655.75381-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make test_x86_memdev_resp() more flexible by allowing arbitrary
memory sizes as parameter here.
Message-Id: <20230704071655.75381-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add some simple tests of the watchdog timer in the always-on domain device
of HiFive 1 rev b.
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627141216.3962299-4-tommy.wu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add basic chip and core xscom tests for powernv10 machine, equivalent
to tests for powernv8 and 9.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230706053923.115003-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Following are done to fix the coverity issues:
1. Change read_data to fix the CID 1512899: Out-of-bounds access (OVERRUN)
2. Fix match_rx_tx_data to fix CID 1512900: Logically dead code (DEADCODE)
3. Replace rand() in generate_random_data() with g_rand_int()
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Message-id: 20230628202758.16398-1-vikram.garhwal@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An update to the clang tooling detects more issues with the code
including a memory leak from the g_string_new() allocation. Clean up
the code to avoid the allocation and use ARRAY_SIZE while we are at
it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-9-alex.bennee@linaro.org>
Add migration switchover ack capability test. The test runs without
devices that support this capability, but is still useful to make sure
it didn't break anything.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Used in the following test on win32, to share sockets with the QEMU
process.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230606115658.677673-7-marcandre.lureau@redhat.com>
TBStats will be introduced to replace CONFIG_PROFILER totally, here
remove all CONFIG_PROFILER related stuffs first.
Signed-off-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230607122411.3394702-2-fei2.wu@intel.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's good style to clean up temporary directories when they
are not needed anymore.
Message-Id: <20230622114132.372898-1-thuth@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230621101710.297975-4-mzamazal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Like existing xen machines, xenpvh also cannot be used for qtest.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The QTests perform three tests on the Xilinx VERSAL CANFD controller:
Tests the CANFD controllers in loopback.
Tests the CANFD controllers in normal mode with CAN frame.
Tests the CANFD controllers in normal mode with CANFD frame.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ipmi-bt-test uses "-device ipmi-bmc-extern", thus it should
only be run if this device has been enabled in the configuration.
Message-Id: <20230524081024.1619273-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Document every single live=true use cases on why it should be done in the
live manner. Also document on the parameter so new precopy cases should
always use live=off unless with explicit reasonings.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230601172935.175726-1-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There are 27 pre-copy live migration scenarios being tested. In all of
these we force non-convergence and run for one iteration, then let it
converge and wait for completion during the second (or following)
iterations. At 3 mbps bandwidth limit the first iteration takes a very
long time (~30 seconds).
While it is important to test the migration passes and convergence
logic, it is overkill to do this for all 27 pre-copy scenarios. The
TLS migration scenarios in particular are merely exercising different
code paths during connection establishment.
To optimize time taken, switch most of the test scenarios to run
non-live (ie guest CPUs paused) with no bandwidth limits. This gives
a massive speed up for most of the test scenarios.
For test coverage the following scenarios are unchanged
* Precopy with UNIX sockets
* Precopy with UNIX sockets and dirty ring tracking
* Precopy with XBZRLE
* Precopy with UNIX compress
* Precopy with UNIX compress (nowait)
* Precopy with multifd
On a test machine this reduces execution time from 13 minutes to
8 minutes.
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-10-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The 'got_stop' and 'got_resume' global variables apply to the src and
dst migration VM respectively. Change their names to make this explicit
to developers.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-9-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When running migration tests we monitor for a STOP event so we can skip
redundant waits. This will be needed for the RESUME event too shortly.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-8-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Most usage of wait_command() is followed by qobject_unref(), which
is just a verbose re-implementation of qtest_qmp_assert_success().
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-7-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Change the migration test to use the new qtest event callback to watch
for the stop event. This ensures that we only watch for the STOP event
on the source QEMU. The previous code would set the single 'got_stop'
flag when either source or dest QEMU got the STOP event.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-6-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Some of the usage is just a verbose way of re-inventing the
qtest_qmp_assert_success(_ref) methods.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-5-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This function duplicates logic of qtest_qmp_assert_success_ref.
The qtest_qmp_assert_success_ref method has better diagnostics
on failure because it prints the entire QMP response, instead
of just asserting on existance of the 'error' key.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-4-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently code must call one of the qtest_qmp_event* functions to
fetch events. These are only usable if the immediate caller knows
the particular event they want to capture, and are only interested
in one specific event type. Adding ability to register an event
callback lets the caller capture a range of events over any period
of time.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-3-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add several counterparts of qtest_qmp_assert_success() that can
* Use va_list instead of ...
* Accept a list of FDs to send
* Return the response data
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-2-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
pflash-cfi02-test.c always uses the "musicpal" machine for testing,
test-arm-mptimer.c always uses the "vexpress-a9" machine, and
microbit-test.c requires the "microbit" machine, so we should only
run these tests if the machines have been enabled in the configuration.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230524080600.1618137-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
POWER9 DD2.1 and earlier had significant limitations when running KVM,
including lack of "mixed mode" MMU support (ability to run HPT and RPT
mode on threads of the same core), and a translation prefetch issue
which is worked around by disabling "AIL" mode for the guest.
These processors are not widely available, and it's difficult to deal
with all these quirks in qemu +/- KVM, so create a POWER9 DD2.2 CPU
and make it the default POWER9 CPU.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20230515160201.394587-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We cannot use the generic reentrancy guard in the LSI code, so
we have to manually prevent endless reentrancy here. The problematic
lsi_execute_script() function has already a way to detect whether
too many instructions have been executed - we just have to slightly
change the logic here that it also takes into account if the function
has been called too often in a reentrant way.
The code in fuzz-lsi53c895a-test.c has been taken from an earlier
patch by Mauro Matteo Cascella.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1563
Message-Id: <20230522091011.1082574-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test if the audio subsystem can handle extreme up- and down-
sampling ratios like 44100/1 and 1/44100. For some time these
used to trigger QEMU aborts. The test was taken from
https://gitlab.com/qemu-project/qemu/-/issues/71 where it was
used to demonstrate a very different issue.
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230520113313.5177-1-vr_qemu@t-online.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The devices might not be available in the binary (e.g. when compiling
with "--without-default-devices"), so we have to check before we can
use them.
Message-Id: <20230525081016.1870364-5-thuth@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
