Allocate and fill a GString instead of snprintf and
appending to a fixed sized buffer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240412073346.458116-22-richard.henderson@linaro.org>
Extract the raw special index and a function to lookup a name.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240412073346.458116-21-richard.henderson@linaro.org>
Use a printf format instead of sprintf into a buffer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240412073346.458116-20-richard.henderson@linaro.org>
Use a printf format instead of sprintf into a buffer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240412073346.458116-19-richard.henderson@linaro.org>
Use a printf format instead of sprintf into a buffer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240412073346.458116-18-richard.henderson@linaro.org>
In the common case, issue one single fprintf.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240412073346.458116-17-richard.henderson@linaro.org>
Unify the code blocks that try to print a symbolic address.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240412073346.458116-15-richard.henderson@linaro.org>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1,
resulting in painful developper experience. Use snprintf() instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20240411104340.6617-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1,
resulting in painful developper experience. Use snprintf() instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240411104340.6617-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Previously we only listed a single pmpcfg CSR and the first 16 pmpaddr
CSRs. This patch fixes this to list all 16 pmpcfg and all 64 pmpaddr
CSRs are part of the disassembly.
Reported-by: Eric DeVolder <eric_devolder@yahoo.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fixes: ea10325917 ("RISC-V Disassembler")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240514051615.330979-1-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Read from already translated pages, or saved mmio data.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The routines in disas-common.c are also used from disas-mon.c.
Otherwise the rest of disassembly is only used from tcg.
While we're at it, put host and target code into separate files.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We usually check target endianess before swapping values,
so target_words_bigendian() declaration makes sense in
"exec/tswap.h" with the target swapping helpers.
Remove "hw/core/cpu.h" when it was only included to get
the target_words_bigendian() declaration.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-16-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").
Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
GCC 14 shows -Wshadow=local warnings if an enum conflicts with a local
variable (including a parameter). To avoid this, move the problematic
enum and all of its dependencies after the hundreds of functions that
have a parameter named "instruction".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes the output suitable when used for plugins.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-30-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-28-alex.bennee@linaro.org>
For plugins we don't expect the raw opcodes in the disassembly. We
already deal with this by hand crafting our capstone call but for
other diassemblers we need a flag. Introduce show_opcodes which
defaults to off.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-27-alex.bennee@linaro.org>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git disas/riscv disas/riscv*[ch]
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231207153842.32401-3-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Propagate the buffer size to format_dec() and use snprintf().
This should silence this UBSan -Wformat-overflow warning:
In file included from /usr/include/stdio.h:906,
from include/qemu/osdep.h:114,
from ../disas/cris.c:21:
In function 'sprintf',
inlined from 'format_dec' at ../disas/cris.c:1737:3,
inlined from 'print_with_operands' at ../disas/cris.c:2477:12,
inlined from 'print_insn_cris_generic.constprop' at ../disas/cris.c:2690:8:
/usr/include/bits/stdio2.h:30:10: warning: null destination pointer [-Wformat-overflow=]
30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
31 | __glibc_objsize (__s), __fmt,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
32 | __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~
Reported-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231120132222.82138-1-philmd@linaro.org>
[Rewritten to fix logic and avoid repeated expression. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On hppa many instructions can be expressed by different bytecodes.
To be able to debug qemu translation bugs it's therefore necessary to see the
currently executed byte codes without the need to lookup the sequence without
the full executable.
With this patch the instruction byte code is shown beside the disassembly.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Replaces TABs with spaces, making sure to have a consistent coding style
of 4 space indentations.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231026151828.754279-15-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add rv_codec_vror_vi for the vector crypto instruction - vror.vi.
The rotate amount of vror.vi is defined by combining seperated bits.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231026151828.754279-13-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add rv_fmt_vd_vs2_uimm format for vector crypto instructions.
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231026151828.754279-12-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix the inverted order of pmpaddr13 and pmpaddr14 in csr_name().
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230907084500.328-1-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix following warnings
.../disas/m68k.c: In function ‘print_insn_arg’:
.../disas/m68k.c:1635:13: warning: declaration of ‘val’ shadows a previous local [-Wshadow=compatible-local]
1635 | int val = fetch_arg (buffer, place, 5, info);
| ^~~
.../disas/m68k.c:1093:7: note: shadowed declaration is here
1093 | int val = 0;
| ^~~
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20230925084455.395150-1-laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The GNU assembler produces the following output for instructions
with upper immediates:
00002597 auipc a1,0x2
000024b7 lui s1,0x2
6409 lui s0,0x2 # c.lui
The immediate operands of upper immediates are not shifted.
However, the QEMU disassembler prints them shifted:
00002597 auipc a1,8192
000024b7 lui s1,8192
6409 lui s0,8192 # c.lui
The current implementation extracts the immediate bits and shifts the by 12,
so the internal representation of the immediate is the actual immediate.
However, the immediates are later printed using rv_fmt_rd_imm or
rv_fmt_rd_offset, which don't undo the shift.
Let's fix this by using specific output formats for instructions
with upper immediates, that take care of the shift.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230711075051.1531007-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch introduces the RISC-V Zfa extension, which introduces
additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of float register bigger than XLEN
* Quiet comparison instructions (fleq/fltq)
Zfa defines its instructions in combination with the following extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
Since QEMU does not support the RISC-V quad-precision floating-point
ISA extension (Q), this patch does not include the instructions that
depend on this extension. All other instructions are included in this
patch.
The Zfa specification can be found here:
https://github.com/riscv/riscv-isa-manual/blob/master/src/zfa.tex
The Zfa specifciation is frozen and is in public review since May 3, 2023:
https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/SED4ntBkabg
The patch also includes a TCG test for the fcvtmod.w.d instruction.
The test cases test for correct results and flag behaviour.
Note, that the Zfa specification requires fcvtmod's flag behaviour
to be identical to a fcvt with the same operands (which is also
tested).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230710071243.282464-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230703071759.86775-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Support for emulating XThead* instruction has been added recently.
This patch adds support for these instructions to the RISC-V disassembler.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-9-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds XVentanaCondOps support to the RISC-V disassembler.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230612111034.3955227-8-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A previous patch provides a pointer to the RISCVCPUConfig data.
Let's use this to add the necessary code for vendor extensions.
This patch does not change the current behaviour, but clearly
defines how vendor extension support can be added to the disassembler.
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-7-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds a reference to a struct rv_opcode_data object
into struct rv_decode. This further allows to remove all references
to the global variable opcode_data (which is renamed to rvi_opcode_data).
This patch does not introduce any functional change, but prepares
the code for more struct rv_opcode_data objects in the future.
This patch is based on previous work from Liu Zhiwei:
https://lists.nongnu.org/archive/html/qemu-devel/2022-08/msg03662.html
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-6-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The enum value 'rv_op_illegal' does not represent an
instruction, but is a catch-all value in case we have
no match in the decoder. Let's make the value a shared
one, so that other compile units can reuse it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-5-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In order to enable vendor disassembler support, we need to
move types and constants into a header file so that other
compilation units can use them as well.
This patch does not introduce any functional changes.
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-4-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove redundant parenthese and fix multi-line comments.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-9-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix lines with over 80 characters.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-8-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently decomp_rv32 and decomp_rv64 value in opcode_data for vector
instructions are the same op index as their own. And they have no
functional decomp_data. So they have no functional difference from just
leaving them as zero.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Support disas for Z*inx instructions only when Zfinx extension is supported.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Support disas for Zcmt* instructions only when related extensions
are supported.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Pass RISCVCPUConfig as disassemble_info.target_info to support disas
of conflict instructions related to specific extensions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use target_words_bigendian() instead of an ifdef.
Remove CONFIG_RISCV_DIS from the check for riscv as a host; this is
a poisoned identifier, and anyway will always be set by meson.build
when building on a riscv host.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230508133745.109463-3-thuth@redhat.com>
[rth: Type change done in a separate patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
