It is common practice when implementing double-buffering on VideoCore
to do so by multiplying the height of the virtual buffer by the
number of virtual screens desired (i.e., two - in the case of
double-bufferring).
At present, this won't work in QEMU because the logic in
fb_use_offsets require that both the virtual width and height exceed
their physical counterparts.
This appears to be unintentional/a typo and indeed the comment
states; "Experimentally, the hardware seems to do this only if the
viewport size is larger than the physical screen". The
viewport/virtual size would be larger than the physical size if
either virtual dimension were larger than their physical counterparts
and not necessarily both.
Signed-off-by: SamJakob <me@samjakob.com>
Message-id: 20240713160353.62410-1-me@samjakob.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit c1a1f80518 when we added the FEAT_LSE2 relaxations to
the alignment requirements for atomic and ordered loads and stores,
we didn't quite get it right for LDAPR/LDAPRH/LDAPRB with no
immediate offset. These instructions were handled in the old decoder
as part of disas_ldst_atomic(), but unlike all the other insns that
function decoded (LDADD, LDCLR, etc) these insns are "ordered", not
"atomic", so they should be using check_ordered_align() rather than
check_atomic_align(). Commit c1a1f80518 used
check_atomic_align() regardless for everything in
disas_ldst_atomic(). We then carried that incorrect check over in
the decodetree conversion, where LDAPR/LDAPRH/LDAPRB are now handled
by trans_LDAPR().
The effect is that when FEAT_LSE2 is implemented, these instructions
don't honour the SCTLR_ELx.nAA bit and will generate alignment
faults when they should not.
(The LDAPR insns with an immediate offset were in disas_ldst_ldapr_stlr()
and then in trans_LDAPR_i() and trans_STLR_i(), and have always used
the correct check_ordered_align().)
Use check_ordered_align() in trans_LDAPR().
Cc: qemu-stable@nongnu.org
Fixes: c1a1f80518 ("target/arm: Relax ordered/atomic alignment checks for LSE2")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240709134504.3500007-3-peter.maydell@linaro.org
When we converted the LDAPR/STLR instructions to decodetree we
accidentally introduced a regression where the offset is negative.
The 9-bit immediate field is signed, and the old hand decoder
correctly used sextract32() to get it out of the insn word,
but the ldapr_stlr_i pattern in the decode file used "imm:9"
instead of "imm:s9", so it treated the field as unsigned.
Fix the pattern to treat the field as a signed immediate.
Cc: qemu-stable@nongnu.org
Fixes: 2521b6073b ("target/arm: Convert LDAPR/STLR (imm) to decodetree")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2419
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240709134504.3500007-2-peter.maydell@linaro.org
Update meson-buildoptions.sh to stay in sync with meson_options.txt.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open(). And considering
rng_random_opened() will lose its obvious error handling case after
removing error_setg_file_open(), add comment to remind here.
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Amit Shah <amit@kernel.org>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
(mjt: drop superfluous commit as suggested by philmd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open().
Cc: Yi Liu <yi.l.liu@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open().
Cc: David Hildenbrand <david@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open().
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: "Cédric Le Goater" <clg@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open(). And considering the SGX
enablement description is useful, convert it into a error message hint.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The test has been marked as broken more than 4 years ago [*],
and so far nobody ever cared to fix it. Thus let's simply remove
it now ... if somebody ever needs it again, they can restore the
file from an older version of QEMU.
[*] https://lore.kernel.org/qemu-devel/4bbe9ff8-e1a8-917d-5a57-ce5185da19fa@redhat.com/
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
(mjt: add reference as suggested by philm)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The short-form boolean options has been deprecated since v6.0 (refer
to docs/about/deprecated.rst).
Update the description and example of boolean fields in l2tpv3 option to
avoid deprecation warning.
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix the superfluous trailing semicolon in target/hexagon/imported/mmvec/
ext.idef.
Cc: Brian Cain <bcain@quicinc.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Make the README more clearly.
Signed-off-by: Zhihai Dong <dongzhihai@eswincomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Existing code was long, unclear and twisty.
This also relaxes the rules a tiny bit: allows to have
whitespace before header name and colon and makes the
header value match to be case-insensitive.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Fully eliminate the "Example" sections in QAPI doc blocks now that they
have all been converted to arbitrary rST syntax using the
".. qmp-example::" directive. Update tests to match.
Migrating to the new syntax
---------------------------
The old "Example:" or "Examples:" section syntax is now caught as an
error, but "Example::" is stil permitted as explicit rST syntax for an
un-lexed, generic preformatted text block.
('Example' is not special in this case, any sentence that ends with "::"
will start an indented code block in rST.)
Arbitrary rST for Examples is now possible, but it's strongly
recommended that documentation authors use the ".. qmp-example::"
directive for consistent visual formatting in rendered HTML docs. The
":title:" directive option may be used to add extra information into the
title bar for the example. The ":annotated:" option can be used to write
arbitrary rST instead, with nested "::" blocks applying QMP formatting
where desired.
Other choices available are ".. code-block:: QMP" which will not create
an "Example:" box, or the short-form "::" code-block syntax which will
not apply QMP highlighting when used outside of the qmp-example
directive.
Why?
----
This patch has several benefits:
1. Example sections can now be written more arbitrarily, mixing
explanatory paragraphs and code blocks however desired.
2. Example sections can now use fully arbitrary rST.
3. All code blocks are now lexed and validated as QMP; increasing
usability of the docs and ensuring validity of example snippets.
(To some extent - This patch only gaurantees it lexes correctly, not
that it's valid under the JSON or QMP grammars. It will catch most
small mistakes, however.)
4. Each qmp-example can be titled or annotated independently without
bypassing the QMP lexer/validator.
(i.e. code blocks are now for *code* only, so we don't have to
sacrifice exposition for having lexically valid examples.)
NOTE: As with the "Notes" conversion (d461c27973), this patch (and the
three preceding) may change the rendering order for Examples in
the current generator. The forthcoming qapidoc rewrite will fix
this by always generating documentation in source order.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240717021312.606116-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
These examples require longer explanations or have explanations that
require markup to look reasonable when rendered and so use the longer
form of the ".. qmp-example::" directive.
By using the :annotated: option, the content in the example block is
assumed *not* to be a code block literal and is instead parsed as normal
rST - with the exception that any code literal blocks after `::` will
assumed to be a QMP code literal block.
Note: There's one title-less conversion in this patch that comes along
for the ride because it's part of a larger "Examples" block that was
better to convert all at once.
See commit-5: "docs/qapidoc: create qmp-example directive", for a
detailed explanation of this custom directive syntax.
See commit+1: "qapi: remove "Example" doc section" for a detailed
explanation of why.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-9-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When an Example section has a brief explanation, convert it to a
qmp-example:: section using the :title: option.
Rule of thumb: If the title can fit on a single line and requires no rST
markup, it's a good candidate for using the :title: option of
qmp-example.
In this patch, trailing punctuation is removed from the title section
for consistent headline aesthetics. In just one case, specifics of the
example are removed to make the title read better.
See commit-4: "docs/qapidoc: create qmp-example directive", for a
detailed explanation of this custom directive syntax.
See commit+2: "qapi: remove "Example" doc section" for a detailed
explanation of why.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-8-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use the no-option form of ".. qmp-example::" to convert any Examples
that do not have any form of caption or explanation whatsoever. Note
that in a few cases, example sections are split into two or more
separate example blocks. This is only done stylistically to create a
delineation between two or more logically independent examples.
See commit-3: "docs/qapidoc: create qmp-example directive", for a
detailed explanation of this custom directive syntax.
See commit+3: "qapi: remove "Example" doc section" for a detailed
explanation of why.
Note: an empty "TODO" line was added to announce-self to keep the
example from floating up into the body; this will be addressed more
rigorously in the new qapidoc generator.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240717021312.606116-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Markup fixed in one place]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add CSS styling for qmp-example directives to increase readability and
consistently style all example blocks.
Signed-off-by: Harmonie Snow <harmonie@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-6-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For any code literal blocks inside of a qmp-example directive, apply and
enforce the QMP lexer/highlighter to those blocks.
This way, you won't need to write:
```
.. qmp-example::
:annotated:
Blah blah
.. code-block:: QMP
-> { "lorem": "ipsum" }
```
But instead, simply:
```
.. qmp-example::
:annotated:
Blah blah::
-> { "lorem": "ipsum" }
```
Once the directive block is exited, whatever the previous default
highlight language was will be restored; localizing the forced QMP
lexing to exclusively this directive.
Note, if the default language is *already* QMP, this directive will not
generate and restore redundant highlight configuration nodes. We may
well decide that the default language ought to be QMP for any QAPI
reference pages, but this way the directive behaves consistently no
matter where it is used.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-5-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is a directive that creates a syntactic sugar for creating
"Example" boxes very similar to the ones already used in the bitmaps.rst
document, please see e.g.
https://www.qemu.org/docs/master/interop/bitmaps.html#creation-block-dirty-bitmap-add
In its simplest form, when a custom title is not needed or wanted, and
the example body is *solely* a QMP example:
```
.. qmp-example::
{body}
```
is syntactic sugar for:
```
.. admonition:: Example:
.. code-block:: QMP
{body}
```
When a custom, plaintext title that describes the example is desired,
this form:
```
.. qmp-example::
:title: Defrobnification
{body}
```
Is syntactic sugar for:
```
.. admonition:: Example: Defrobnification
.. code-block:: QMP
{body}
```
Lastly, when Examples are multi-step processes that require non-QMP
exposition, have lengthy titles, or otherwise involve prose with rST
markup (lists, cross-references, etc), the most complex form:
```
.. qmp-example::
:annotated:
This example shows how to use `foo-command`::
{body}
For more information, please see `frobnozz`.
```
Is desugared to:
```
.. admonition:: Example:
This example shows how to use `foo-command`::
{body}
For more information, please see `frobnozz`.
```
Note that :annotated: and :title: options can be combined together, if
desired.
The primary benefit here being documentation source consistently using
the same directive for all forms of examples to ensure consistent visual
styling, and ensuring all relevant prose is visually grouped alongside
the code literal block.
Note that as of this commit, the code-block rST syntax "::" does not
apply QMP highlighting; you would need to use ".. code-block:: QMP". The
very next commit changes this behavior to assume all "::" code blocks
within this directive are QMP blocks.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-4-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Factor out the compatibility parser helper into a base class, so it can
be shared by other directives.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-3-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Doc comments are reference documentation for users of QMP.
SpiceQueryMouseMode's doc comment contains a note explaining why it's
not named SpiceMouseMode: spice/enums.h has it already. Irrelevant
for users of QMP; delete the note.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-6-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Doc comments are reference documentation for users of QMP.
SocketAddress's doc comment contains a deprecation note advising
developers to use SocketAddress for new code. Irrelevant for users of
QMP. Move the note out of the doc comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-5-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When no UUID has been specified, query-uuid returns
{"UUID": "00000000-0000-0000-0000-000000000000"}
The doc comment calls this "a null UUID", which I find less than
clear. RFC 9562 calls it "the nil UUID (all zeroes)", so use that
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-4-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
[Wording improved, commit message adjusted]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CpuInstanceProperties' doc comment describes its members as properties
to be passed to device_add when hot-plugging a CPU.
This was in fact the initial use of this type, with
query-hotpluggable-cpus: letting management applications find out what
properties need to be passed with device_add to hot-plug a CPU.
We've since added other uses: set-numa-node (commit 419fcdec3c and
f3be67812c), and query-cpus-fast (commit ce74ee3dea). These are not
about device-add.
query-hotpluggable-cpus uses CpuInstanceProperties within
HotpluggableCPU. Lift the documentation related to device-add from
CpuInstanceProperties to HotpluggableCPU.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-3-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
PciDeviceInfo's doc comment has a note on PciDeviceClass member @desc.
Since the note applies always, not just within PciDeviceInfo, merge it
into PciDeviceClass's description of member @desc.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-2-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Commit 8f9a9259d3 added ObjectType member @x-vfio-user-server with
feature unstable, but neglected to explain why it is unstable. Do
that now.
Fixes: 8f9a9259d3 (vfio-user: define vfio-user-server object)
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: John G Johnson <john.g.johnson@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240703095310.1242102-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
[Indentation fixed]
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
=cZhV
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/tcg: fixes for seg_helper.c
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
# TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
# XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
# y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
# Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
# JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
# =cZhV
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 02:34:05 AM AEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386/tcg: save current task state before loading new one
target/i386/tcg: use X86Access for TSS access
target/i386/tcg: check for correct busy state before switching to a new task
target/i386/tcg: Compute MMU index once
target/i386/tcg: Introduce x86_mmu_index_{kernel_,}pl
target/i386/tcg: Reorg push/pop within seg_helper.c
target/i386/tcg: use PUSHL/PUSHW for error code
target/i386/tcg: Allow IRET from user mode to user mode with SMAP
target/i386/tcg: Remove SEG_ADDL
target/i386/tcg: fix POP to memory in long mode
hpet: fix HPET_TN_SETVAL for high 32-bits of the comparator
hpet: fix clamping of period
docs: Update description of 'user=username' for '-run-with'
qemu/timer: Add host ticks function for LoongArch
scsi: fix regression and honor bootindex again for legacy drives
hw/scsi/lsi53c895a: bump instruction limit in scripts processing to fix regression
disas: Fix build against Capstone v6
cpu: Free queued CPU work
Revert "qemu-char: do not operate on sources from finalize callbacks"
i386/sev: Don't allow automatic fallback to legacy KVM_SEV*_INIT
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Addition of eMMC support is a long-term collaborative virtual work by:
- Cédric Le Goater
- Edgar E. Iglesias
- Francisco Iglesias
- Joel Stanley
- Luc Michel
- Philippe Mathieu-Daudé
- Sai Pavan Boddu
- Vincent Palatin
-----BEGIN PGP SIGNATURE-----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=m52p
-----END PGP SIGNATURE-----
Merge tag 'sdmmc-20240716' of https://github.com/philmd/qemu into staging
SD/MMC patches queue
Addition of eMMC support is a long-term collaborative virtual work by:
- Cédric Le Goater
- Edgar E. Iglesias
- Francisco Iglesias
- Joel Stanley
- Luc Michel
- Philippe Mathieu-Daudé
- Sai Pavan Boddu
- Vincent Palatin
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaWvlEACgkQ4+MsLN6t
# wN7p7hAAj6JV3fIg1iKBR49asQVzU3/nYRIlWnp6QsLRGX+qwjMnuMzlvpinTtq4
# SJZobw1OJp/2LNaEGqAqNHqBpwAPibUnkei0pd1Y+v6Cyywo7X5Y1hRvQf46Ezqm
# u2FxsAfWc4cQs+sFrbNq/v7X2+R6VmChkA+EVc4cB0gwMOjvtg8RQObdhKr7Y6UX
# b9KvRDSNMH75ht39RD/smtcn/kprkkTQYo/ciBbVWdnBMiKuhN0qLXbKnZu9lMs4
# Ru29ypT+98pL1E/4YbgNcLGYXHjKrSIpD3+DEvmWe09LdG2+YMASv7do3iKfAYN5
# KdQ9BNZxYrpmeDAiyL521pODsgvU/wDDdbK0xUztPqcHhpYkvcfYWdzO8wr28Ib0
# wOEA0+xzveeD+1ZKjilbZ6tKzsRrKgv1O8j1T8rXab2/3mjrW2R5G/5y4bpM8E4h
# KuqGwC2YjWsJi3CwRL5Cvu5YBsiyYF7mk0zTKK2qwO87B7Pa0PJ3Y9x0xIWm4blp
# RoZ1SaCChH3M1hKK3jDjrIutXrZG8CzHpe17QjTQeUxo+/wX3VfDYbXasTe1orFu
# +JkUBU+xZ6m1+dWAa22H5KbeY8wd99p6w+ChnVmS15WqVK8i2e4gfTsKGh7Idt3t
# Vf4CaCD/2vRtKo4AN+YNDUg1DWV89zXRbnkR5oWUWG3Fda5Qo3k=
# =m52p
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 04:39:13 AM AEST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'sdmmc-20240716' of https://github.com/philmd/qemu:
hw/sd/sdcard: Support boot area in emmc image
hw/sd/sdcard: Add mmc SWITCH function support (CMD6)
hw/sd/sdcard: Add eMMC 'boot-partition-size' property
hw/sd/sdcard: Add emmc_cmd_SEND_EXT_CSD handler (CMD8)
hw/sd/sdcard: Implement eMMC sleep state (CMD5)
hw/sd/sdcard: Add emmc_cmd_PROGRAM_CID handler (CMD26)
hw/sd/sdcard: Fix SET_BLOCK_COUNT command argument on eMMC (CMD23)
hw/sd/sdcard: Add emmc_cmd_SET_RELATIVE_ADDR handler (CMD3)
hw/sd/sdcard: Register unimplemented command handlers
hw/sd/sdcard: Register generic command handlers
hw/sd/sdcard: Basis for eMMC support
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
switch operation in mmc cards, updated the ext_csd register to
request changes in card operations. Here we implement similar
sequence but requests are mostly dummy and make no change.
Implement SWITCH_ERROR if the write operation offset goes beyond
length of ext_csd.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMD: Convert to SDProto handlers, add trace events]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-11-philmd@linaro.org>
Avoid hardcoding 1MiB boot size in EXT_CSD_BOOT_MULT,
expose it as 'boot-partition-size' QOM property.
By default, do not use any size. The board is responsible
to set the boot partition size property.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-10-philmd@linaro.org>
The parameters mimick a real 4GB eMMC, but it can be set to various
sizes.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
EXT_CSD values from Vincent's patch simplivied for Spec v4.3:
- Remove deprecated keys:
. EXT_CSD_SEC_ERASE_MULT
. EXT_CSD_SEC_TRIM_MULT
- Set some keys to not defined / implemented:
. EXT_CSD_HPI_FEATURES
. EXT_CSD_BKOPS_SUPPORT
. EXT_CSD_SEC_FEATURE_SUPPORT
. EXT_CSD_ERASE_TIMEOUT_MULT
. EXT_CSD_PART_SWITCH_TIME
. EXT_CSD_OUT_OF_INTERRUPT_TIME
- Simplify:
. EXT_CSD_ACC_SIZE (6 -> 1)
16KB of super_page_size -> 512B (BDRV_SECTOR_SIZE)
. EXT_CSD_HC_ERASE_GRP_SIZE (4 -> 1)
. EXT_CSD_HC_WP_GRP_SIZE (4 -> 1)
. EXT_CSD_S_C_VCC[Q] (8 -> 1)
. EXT_CSD_S_A_TIMEOUT (17 -> 1)
. EXT_CSD_CARD_TYPE (7 -> 3)
Dual data rate -> High-Speed mode
- Update:
. EXT_CSD_CARD_TYPE (7 -> 3)
High-Speed MultiMediaCard @ 26MHz & 52MHz
. Performances (0xa -> 0x46)
Class B at 3MB/s. -> Class J at 21MB/s
. EXT_CSD_REV (5 -> 3)
Rev 1.5 (spec v4.41) -> Rev 1.3 (spec v4.3)
- Use load/store API to set EXT_CSD_SEC_CNT
- Remove R/W keys, normally zeroed at reset
. EXT_CSD_BOOT_INFO
Migrate the Modes segment (192 lower bytes) but not the
full EXT_CSD register, see Spec v4.3, chapter 8.4
"Extended CSD register":
The Extended CSD register defines the card properties
and selected modes. It is 512 bytes long. The most
significant 320 bytes are the Properties segment, which
defines the card capabilities and cannot be modified by
the host. The lower 192 bytes are the Modes segment,
which defines the configuration the card is working in.
These modes can be changed by the host by means of the
SWITCH command.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-9-philmd@linaro.org>
The JEDEC standards specifies a sleep state where the eMMC won't
answer any command appart from RESET and WAKEUP and go to low power
state. Implement this state and the corresponding command number 5.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-8-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-Id: <20240712162719.88165-7-philmd@linaro.org>
The number of blocks is defined in the lower bits [15:0].
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-6-philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-5-philmd@linaro.org>
Per the spec v4.3 these commands are mandatory,
but we don't implement them.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-4-philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-3-philmd@linaro.org>
Since eMMC are soldered on boards, it is not user-creatable.
RCA register is initialized to 0x0001, per spec v4.3,
chapter 8.5 "RCA register":
The default value of the RCA register is 0x0001.
The value 0x0000 is reserved to set all cards into
the Stand-by State with CMD7.
The CSD register is very similar to SD one, except
the version announced is v4.3.
eMMC CID register is slightly different from SD:
- One extra PNM (5 -> 6)
- MDT is only 1 byte (2 -> 1).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-2-philmd@linaro.org>
When ram_block_discard_require() fails, errno is passed to error_setg_errno().
It's a stale value or 0 which is unrelated to ram_block_discard_require().
As ram_block_discard_require() already returns -EBUSY in failure case,
use it as errno for error_setg_errno().
Fixes: 852f0048f3 ("make guest_memfd require uncoordinated discard")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240716064213.290696-1-zhenzhong.duan@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
