QEMU uses vhost_svq_translate_addr() to translate addresses
between the QEMU's virtual address and the SVQ IOVA. In order
to validate this translation, QEMU checks whether the translated
range falls within the mapped range.
Yet the problem is that, the value of `needle_last`, which is calculated
by `needle.translated_addr + iovec[i].iov_len`, should represent the
exclusive boundary of the translated range, rather than the last
inclusive addresses of the range. Consequently, QEMU fails the check
when the translated range matches the size of the mapped range.
This patch solves this problem by fixing the `needle_last` value to
the last inclusive address of the translated range.
Note that this bug cannot be triggered at the moment, because QEMU
is unable to translate such a big range due to the truncation of
the CVQ command in vhost_vdpa_net_handle_ctrl_avail().
Fixes: 34e3c94eda ("vdpa: Add custom IOTLB translations to SVQ")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <ee31c5420ffc8e6a29705ddd30badb814ddbae1d.1688743107.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vdpa devices that use va addresses neeeds these maps shared.
Otherwise, vhost_vdpa checks will refuse to accept the maps.
The mmap call will always return a page aligned address, so removing the
qemu_memalign call. Keeping the ROUND_UP for the size as we still need
to DMA-map them in full.
Not applying fixes tag as it never worked with va devices.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602143854.1879091-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU invokes vhost_svq_add() when adding a guest's element
into SVQ. In vhost_svq_add(), it uses vhost_svq_available_slots()
to check whether QEMU can add the element into SVQ. If there is
enough space, then QEMU combines some out descriptors and some
in descriptors into one descriptor chain, and adds it into
`svq->vring.desc` by vhost_svq_vring_write_descs().
Yet the problem is that, `svq->shadow_avail_idx - svq->shadow_used_idx`
in vhost_svq_available_slots() returns the number of occupied elements,
or the number of descriptor chains, instead of the number of occupied
descriptors, which may cause wrapping in SVQ descriptor ring.
Here is an example. In vhost_handle_guest_kick(), QEMU forwards
as many available buffers to device by virtqueue_pop() and
vhost_svq_add_element(). virtqueue_pop() returns a guest's element,
and then this element is added into SVQ by vhost_svq_add_element(),
a wrapper to vhost_svq_add(). If QEMU invokes virtqueue_pop() and
vhost_svq_add_element() `svq->vring.num` times,
vhost_svq_available_slots() thinks QEMU just ran out of slots and
everything should work fine. But in fact, virtqueue_pop() returns
`svq->vring.num` elements or descriptor chains, more than
`svq->vring.num` descriptors due to guest memory fragmentation,
and this causes wrapping in SVQ descriptor ring.
This bug is valid even before marking the descriptors used.
If the guest memory is fragmented, SVQ must add chains
so it can try to add more descriptors than possible.
This patch solves it by adding `num_free` field in
VhostShadowVirtqueue structure and updating this field
in vhost_svq_add() and vhost_svq_get_buf(), to record
the number of free descriptors.
Fixes: 100890f7ca ("vhost: Shadow virtqueue buffers forwarding")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230509084817.3973-1-yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
At this moment it is only possible to migrate to a vdpa device running
with x-svq=on. As a protective measure, the rewind of the inflight
descriptors was done at the destination. That way if the source sent a
virtqueue with inuse descriptors they are always discarded.
Since this series allows to migrate also to passthrough devices with no
SVQ, the right thing to do is to rewind at the source so the base of
vrings are correct.
Support for inflight descriptors may be added in the future.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230303172445.1089785-5-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In vhost_svq_poll(), if vhost_svq_get_buf() fails due to a device
providing invalid descriptors, len is left uninitialized and returned
to the caller, potentally leaking stack data or causing undefined
behavior.
Fix this by initializing len to 0.
Found with GCC 13 and -fanalyzer (abridged):
../hw/virtio/vhost-shadow-virtqueue.c: In function ‘vhost_svq_poll’:
../hw/virtio/vhost-shadow-virtqueue.c:538:12: warning: use of uninitialized value ‘len’ [CWE-457] [-Wanalyzer-use-of-uninitialized-value]
538 | return len;
| ^~~
‘vhost_svq_poll’: events 1-4
|
| 522 | size_t vhost_svq_poll(VhostShadowVirtqueue *svq)
| | ^~~~~~~~~~~~~~
| | |
| | (1) entry to ‘vhost_svq_poll’
|......
| 525 | uint32_t len;
| | ~~~
| | |
| | (2) region created on stack here
| | (3) capacity: 4 bytes
|......
| 528 | if (vhost_svq_more_used(svq)) {
| | ~
| | |
| | (4) inlined call to ‘vhost_svq_more_used’ from ‘vhost_svq_poll’
(...)
| 528 | if (vhost_svq_more_used(svq)) {
| | ^~~~~~~~~~~~~~~~~~~~~~~~~
| | ||
| | |(8) ...to here
| | (7) following ‘true’ branch...
|......
| 537 | vhost_svq_get_buf(svq, &len);
| | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| | (9) calling ‘vhost_svq_get_buf’ from ‘vhost_svq_poll’
|
+--> ‘vhost_svq_get_buf’: events 10-11
|
| 416 | static VirtQueueElement *vhost_svq_get_buf(VhostShadowVirtqueue *svq,
| | ^~~~~~~~~~~~~~~~~
| | |
| | (10) entry to ‘vhost_svq_get_buf’
|......
| 423 | if (!vhost_svq_more_used(svq)) {
| | ~
| | |
| | (11) inlined call to ‘vhost_svq_more_used’ from ‘vhost_svq_get_buf’
|
(...)
|
‘vhost_svq_get_buf’: event 14
|
| 423 | if (!vhost_svq_more_used(svq)) {
| | ^
| | |
| | (14) following ‘false’ branch...
|
‘vhost_svq_get_buf’: event 15
|
|cc1:
| (15): ...to here
|
<------+
|
‘vhost_svq_poll’: events 16-17
|
| 537 | vhost_svq_get_buf(svq, &len);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| | (16) returning to ‘vhost_svq_poll’ from ‘vhost_svq_get_buf’
| 538 | return len;
| | ~~~
| | |
| | (17) use of uninitialized value ‘len’ here
Note by Laurent Vivier <lvivier@redhat.com>:
The return value is only used to detect an error:
vhost_svq_poll
vhost_vdpa_net_cvq_add
vhost_vdpa_net_load_cmd
vhost_vdpa_net_load_mac
-> a negative return is only used to detect error
vhost_vdpa_net_load_mq
-> a negative return is only used to detect error
vhost_vdpa_net_handle_ctrl_avail
-> a negative return is only used to detect error
Fixes: d368c0b052 ("vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush")
Signed-off-by: Carlos López <clopez@suse.de>
Message-Id: <20230213085747.19956-1-clopez@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since we don't know if we will use SVQ at qemu initialization, let's
allocate iova_tree only if needed. To do so, accept it at SVQ start, not
at initialization.
This will avoid to create it if the device does not support SVQ.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-5-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next patches will start control SVQ if possible. However, we don't
know if that will be possible at qemu boot anymore.
Delay device file descriptors until we know it at device start. This
will avoid to create them if the device does not support SVQ.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By the end of this series CVQ is shadowed as long as the features
support it.
Since we don't know at the beginning of qemu running if this is
supported, move the event notifier handler setting to the start of the
SVQ, instead of the start of qemu run. This will avoid to create them if
the device does not support SVQ.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enabling all the code path created before.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
So SVQ code knows if an event is needed.
The code is not reachable at the moment.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Actually use the new field of the used ring and tell the device if SVQ
wants to be notified.
The code is not reachable at the moment.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There was not enough room to accomodate them.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
GCC issues a false positive warning, resulting in build failure with -Werror:
In file included from /usr/include/glib-2.0/glib.h:114,
from src/include/glib-compat.h:32,
from src/include/qemu/osdep.h:144,
from ../src/hw/virtio/vhost-shadow-virtqueue.c:10:
In function ‘g_autoptr_cleanup_generic_gfree’,
inlined from ‘vhost_handle_guest_kick’ at ../src/hw/virtio/vhost-shadow-virtqueue.c:292:42:
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: error: ‘elem’ may be used uninitialized [-Werror=maybe-uninitialized]
28 | g_free (*pp);
| ^~~~~~~~~~~~
../src/hw/virtio/vhost-shadow-virtqueue.c: In function ‘vhost_handle_guest_kick’:
../src/hw/virtio/vhost-shadow-virtqueue.c:292:42: note: ‘elem’ was declared here
292 | g_autofree VirtQueueElement *elem;
| ^~~~
cc1: all warnings being treated as errors
There is actually no problem since "elem" is initialized in both branches.
Silence the warning by initializig it with "NULL".
$ gcc --version
gcc (GCC) 12.2.0
Fixes: 9c2ab2f1ec ("vhost: stop transfer elem ownership in vhost_handle_guest_kick")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220910151117.6665-1-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since QEMU will be able to inject new elements on CVQ to restore the
state, we need not to depend on a VirtQueueElement to know if a new
element has been used by the device or not. Instead of check that, check
if there are new elements only using used idx on vhost_svq_flush.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
As discussed in previous series [1], this memory barrier is useless with
the atomic read of used idx at vhost_svq_more_used. Deleting it.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-07/msg02616.html
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since we're going to allow SVQ to add elements without the guest's
knowledge and without its own VirtQueueElement, it's easier to check if
an element is a valid head checking a different thing than the
VirtQueueElement.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It was easier to allow vhost_svq_add to handle the memory. Now that we
will allow qemu to add elements to a SVQ without the guest's knowledge,
it's better to handle it in the caller.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We can unbind twice a file descriptor if we call twice
vhost_svq_set_svq_kick_fd because of this. Since it comes from vhost and
not from SVQ, that file descriptor could be a different thing that
guest's vhost notifier.
Likewise, it can happens the same if a guest start and stop the device
multiple times.
Reported-by: Lei Yang <leiyang@redhat.com>
Fixes: dff4426fa6 ("vhost: Add Shadow VirtQueue kick forwarding capabilities")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows external handlers to be aware of new buffers that the guest
places in the virtqueue.
When this callback is defined the ownership of the guest's virtqueue
element is transferred to the callback. This means that if the user
wants to forward the descriptor it needs to manually inject it. The
callback is also free to process the command by itself and use the
element with svq_push.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It allows the Shadow Control VirtQueue to wait for the device to use the
available buffers.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows external parts of SVQ to forward custom buffers to the
device.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This function allows external SVQ users to return guest's available
buffers.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A guest's buffer continuos on GPA may need multiple descriptors on
qemu's VA, so SVQ should track its length sepparatedly.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This will allow SVQ to add context to the different queue elements.
This patch only store the actual element, no functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
VirtQueueElement comes from the guest, but we're heading SVQ to be able
to modify the element presented to the device without the guest's
knowledge.
To do so, make SVQ accept sg buffers directly, instead of using
VirtQueueElement.
Add vhost_svq_add_element to maintain element convenience.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The series need to expose vhost_svq_add with full functionality,
including checking for full queue.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The series needs to expose vhost_svq_add with full functionality,
including kick
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Future code needs to call it from vhost_svq_add.
No functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In the next patch we will allow busypolling of this value. The compiler
have a running path where shadow_used_idx, last_used_idx, and vring used
idx are not modified within the same thread busypolling.
This was not an issue before since we always cleared device event
notifier before checking it, and that could act as memory barrier.
However, the busypoll needs something similar to kernel READ_ONCE.
Let's add it here, sepparated from the polling.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's done for both in and out descriptors so it's better placed here.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Coverity rightly reports that is not free in that case.
Fixes: Coverity CID 1487559
Fixes: 100890f7ca ("vhost: Shadow virtqueue buffers forwarding")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220512175747.142058-7-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Only the first one of them were properly enqueued back.
Fixes: 100890f7ca ("vhost: Shadow virtqueue buffers forwarding")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220512175747.142058-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The device could have access to modify them, and it definitely have
access when we implement packed vq. Harden SVQ maintaining a private
copy of the descriptor chain. Other fields like buffer addresses are
already maintained sepparatedly.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220512175747.142058-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use translations added in VhostIOVATree in SVQ.
Only introduce usage here, not allocation and deallocation. As with
previous patches, we use the dead code paths of shadow_vqs_enabled to
avoid commiting too many changes at once. These are impossible to take
at the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Initial version of shadow virtqueue that actually forward buffers. There
is no iommu support at the moment, and that will be addressed in future
patches of this series. Since all vhost-vdpa devices use forced IOMMU,
this means that SVQ is not usable at this point of the series on any
device.
For simplicity it only supports modern devices, that expects vring
in little endian, with split ring and no event idx or indirect
descriptors. Support for them will not be added in this series.
It reuses the VirtQueue code for the device part. The driver part is
based on Linux's virtio_ring driver, but with stripped functionality
and optimizations so it's easier to review.
However, forwarding buffers have some particular pieces: One of the most
unexpected ones is that a guest's buffer can expand through more than
one descriptor in SVQ. While this is handled gracefully by qemu's
emulated virtio devices, it may cause unexpected SVQ queue full. This
patch also solves it by checking for this condition at both guest's
kicks and device's calls. The code may be more elegant in the future if
SVQ code runs in its own iocontext.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It reports the shadow virtqueue address from qemu virtual address space.
Since this will be different from the guest's vaddr, but the device can
access it, SVQ takes special care about its alignment & lack of garbage
data. It assumes that IOMMU will work in host_page_size ranges for that.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows SVQ to negotiate features with the guest and the device. For
the device, SVQ is a driver. While this function bypasses all
non-transport features, it needs to disable the features that SVQ does
not support when forwarding buffers. This includes packed vq layout,
indirect descriptors or event idx.
Future changes can add support to offer more features to the guest,
since the use of VirtQueue gives this for free. This is left out at the
moment for simplicity.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This will make qemu aware of the device used buffers, allowing it to
write the guest memory with its contents if needed.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
At this mode no buffer forwarding will be performed in SVQ mode: Qemu
will just forward the guest's kicks to the device.
Host memory notifiers regions are left out for simplicity, and they will
not be addressed in this series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Vhost shadow virtqueue (SVQ) is an intermediate jump for virtqueue
notifications and buffers, allowing qemu to track them. While qemu is
forwarding the buffers and virtqueue changes, it is able to commit the
memory it's being dirtied, the same way regular qemu's VirtIO devices
do.
This commit only exposes basic SVQ allocation and free. Next patches of
the series add functionality like notifications and buffers forwarding.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
