Restrict IDs to letters, digits, '-', '.', '_', starting with a
letter.
This takes care of '/' in qdev IDs breaking qbus_find().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Setting the ID in pci_nic_init() is a blatant violation of the
DeviceState abstraction. Which even carries a comment advising
against this:
/* This structure should not be accessed directly. We declare it here
so that it can be embedded in individual device state structures. */
What's worse, it bypasses the code ensuring unique qdev IDs: "-device
virtio-net-pci,id=foo -net nic,id=foo -net nic,name=foo" happily
creates three qdevs with ID "foo". That's because qdev relies on
qemu_opts_create() to ensure unique IDs, but -net nic uses a different
QemuOptsList, which means id is in a different namespace. And its
name is not checked for uniqueness at all.
-net nic and pci_add are legacy. Use -device and device_add if you
want a NIC with a qdev ID.
This reverts what's still left of commit eb54b6dc "qdev: add id=
support for pci nics."
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When mistakenly configuring two devices in the same PCI slot,
QEMU gives a not entirely obvious message about a 'devfn' being
in use:
$ qemu -device rtl8139 -device virtio-balloon-pci,bus=pci.0,addr=0x3
qemu-kvm: -device virtio-balloon-pci,bus=pci.0,addr=0x3: PCI: devfn 24 not available for virtio-balloon-pci, in use by rtl8139
The user does not configure 'devfn' numbers, they use slot+function.
Thus the error messages should be reported back to the user with that
same terminology rather than the internal QEMU terminology. This
patch makes it report:
$ qemu -device rtl8139 -device virtio-balloon-pci,bus=pci.0,addr=0x3
qemu: -device virtio-balloon-pci,bus=pci.0,addr=0x3.7: PCI: slot 3 function 0 not available for virtio-balloon-pci, in use by rtl8139
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Pass the MultiReqBuffer structure down all the way to the I/O submission
instead of takin it apart. Also mark num_writes unsigned as it can't
go negative, and take the check for any pending I/O requests into the
submission function. Last but not least rename do_multiwrite to
virtio_submit_multiwrite to fit the general naming scheme and make clear
what it does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is a 1:1 relation between VirtIOBlock and BlockDriverState instances,
no need to track it because it won't change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a USB keyboard is unplugged, the keyboard eventhandler is never
removed, and events will continue to be passed through to the device,
causing crashes or memory corruption.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All signals will thus be routed through the IO thread.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fixes the following error report. When changing
migration-tcp.c to call migrate_fd_error() instead of close() and
free() by itself, monitor is resumed, and returns allocated mig_state
is set to current_migration in migration.c allows us to print "info
migrate".
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Although there is no difference, other migration related code use
qemu_free(), and it should be better to be consistent.
Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This makes the RAM block list easier to manipulate. Also incorporate
relevant variables into the RAMList struct.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To hot-unplug guest and host part of a network device, you do:
device_del NIC-ID
netdev_del NETDEV-ID
For PCI devices, device_del merely tells ACPI to unplug the device.
The device goes away for real only after the guest processed the ACPI
unplug event.
You have to wait until then (e.g. by polling info pci) before you can
unplug the netdev. Not good.
Fix by removing the "in use" check from do_netdev_del(). Deleting a
netdev while it's in use is safe; packets simply get routed to the bit
bucket.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently HPET ACPI table is created regardless of whether qemu actually
created hpet device. This may confuse some guests that don't check that
hpet is functional before using it. Solve this by passing info about
hpets in qemu to seabios via fw config interface. Additional benefit is
that seabios no longer uses hard coded hpet configuration. Proposed
interface supports up to 8 hpets. This is the number defined by hpet
spec.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The capability register is read-only from guest POV, so we do not need
to update it on reset.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When dest is NULL, i.e. a new copy of the list is created, we don't get a
properly terminated list after the realloc. Initialize it as an empty list.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Change #define DEBUG to #define E1000_DEBUG in hw/e1000.c to make
it possible to build QEMU with -DDEBUG
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove unused DEBUG defines from hw/msix.c to avoid having anything
define the word DEBUG without any additions such as MSIX_DEBUG.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This command was of minimal use before, now it is useless as the hpet
become a qdev device and is thus easily discoverable. We should
definitely not set query-hpet in QMP's stone, and there is also no good
reason to keep it for the interactive monitor.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This implements the HPET capability of routing IRQs to the front-side
bus, aka MSI support. This feature can be enabled via the qdev property
"msi" and is off by default.
Note that switching it on can cause guests (at least Linux) to use the
HPET as timer instead of the LAPIC. KVM users should recall that only
the latter is currently available as fast in-kernel model.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
One HPET block supports up to 32 timers. Allow to instantiate more than
the recommended and implemented minimum of 3. The number is configured
via the qdev property "timers". It is also saved/restored so that it
need not match between migration peers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
By implementing this feature we can also remove a nasty way to kill qemu
(by trying to enable level-triggered hpet interrupts).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instead of keeping a static reference around, pass the state to
hpet_enabled and hpet_get_ticks. All callers now have it at hand. Will
once allow to instantiate the HPET more than a single time.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Allow the intercept the RTC IRQ for the HPET legacy mode. Then push
routing to IRQ8 completely into the HPET. This allows to turn
hpet_in_legacy_mode() into a private function. Furthermore, this stops
the RTC from clearing IRQ8 even if the HPET is in control.
This patch comes with a side effect: The RTC timers will no longer be
stoppend when there is no IRQ consumer, possibly causing a minor
performance degration. But as the guest may want to redirect the RTC to
the SCI in that mode, it should normally disable unused IRQ source
anyway.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We have to update the qemu timer when the per-timer enable bit is
toggled, just like for HPET_CFG_ENABLE changes.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Register the HPET as a sysbus device and create it that way. As it can
route its IRQs to any ISA IRQ, we need to connect it to all 24 of them.
Once converted to qdev, we can move reset handler and vmstate
registration into its hands as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Properly initialize HPETTimer::tn and HPETTimer::state once during
hpet_init instead of (re-)writing them on every reset.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Setting the main counter while the HPET is enabled may not be a good
idea of the guest, but it is supported and should, thus, not spam the
host console with warnings.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This moves the private HPET structures into the C module, simplifies
some helper functions and fixes most coding style issues (biggest chunk
was improper switch-case indention). No functional changes.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Also prevent out-of-bounds write access to the timers but don't spam the
host console if it triggers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Only match on true dir variable assignments, avoid generating garbage
due to the "# Configured with: ..." line which may contain "*dir=" as
well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move handling to change process name to POSIX specific files
plus add a better error message to cover the case where the
feature isn't supported.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move line-buffering setup to OS specific files.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
os_change_process_uid() and os_change_root() are now only called
from os-posix.c, so no need to keep win32 stubs for them.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move daemonize handling from vl.c to OS specific files. Provide dummy
stubs for Win32.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move chroot handling to OS specific files.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move code to handle runas, ie. change of user id of QEMU process
to OS specific files and provide dummy stub for Win32.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce OS specific cmdline argument handling by calling
os_parse_cmd_args() at the end of switch() statement. Move option
enum to qemu-options.h and have it included from os-posix.c and
os-win32.c in addition to vl.c.
In addition move SMB argument to os-posix.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rename qemu-options.h to qemu-options.def as it is not a header file
for general use and this leaves space for a proper qemu-options.h
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This moves the win32 and POSIX versions of find_datadir() to OS
specific files, and removes some #ifdef clutter from vl.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move main signal handler setup to os specific files.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rename os_setup_signal_handling() to os_setup_early_signal_handling()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move win32 early signal handling setup to os_setup_signal_handling()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introcuce os-posix.c and move posix specific signal handling
there.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
