The feature test functions isar_feature_*() now take up nearly
a thousand lines in target/arm/cpu.h. This header file is included
by a lot of source files, most of which don't need these functions.
Move the feature test functions to their own header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-2-peter.maydell@linaro.org
The include of hw/arm/virt.h in kvm64.c is unnecessary and also a
layering violation since the generic KVM code shouldn't need to know
anything about board-specifics. The include line is an accidental
leftover from commit 15613357ba, where we cleaned up the code
to not depend on virt board internals but forgot to also remove the
now-redundant include line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230925110429.3917202-1-peter.maydell@linaro.org
We can neaten the code by switching the callers that work on a
CPUstate to the kvm_get_one_reg function.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231010142453.224369-3-cohuck@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can neaten the code by switching to the kvm_set_one_reg function.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231010142453.224369-2-cohuck@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Due to recent KVM changes, QEMU is setting a ptimer offset resulting
in unintended trap and emulate access and a consequent performance
hit. Filter out the PTIMER_CNT register to restore trapless ptimer
access.
Quoting Andrew Jones:
Simply reading the CNT register and writing back the same value is
enough to set an offset, since the timer will have certainly moved
past whatever value was read by the time it's written. QEMU
frequently saves and restores all registers in the get-reg-list array,
unless they've been explicitly filtered out (with Linux commit
680232a94c12, KVM_REG_ARM_PTIMER_CNT is now in the array). So, to
restore trapless ptimer accesses, we need a QEMU patch to filter out
the register.
See
https://lore.kernel.org/kvmarm/gsntttsonus5.fsf@coltonlewis-kvm.c.googlers.com/T/#m0770023762a821db2a3f0dd0a7dc6aa54e0d0da9
for additional context.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Colton Lewis <coltonlewis@google.com>
Message-id: 20230831190052.129045-1-coltonlewis@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230829232335.965414-3-richard.henderson@linaro.org
[PMM: drop the HVF part of the patch and just comment that
we need to do something when the register appears in that API]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Changes the signature of the target-defined functions for
inserting/removing kvm hw breakpoints. The address and length arguments
are now of vaddr type, which both matches the type used internally in
accel/kvm/kvm-all.c and makes the api target-agnostic.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These helpers will be also used for HVF. Aside from reformatting a
couple of comments for 'checkpatch.pl' and updating meson to compile
'hyp_gdbstub.c', this is just code motion.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230601153107.81955-2-fcagnin@quarkslab.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit b320e21c48,
which accidentally broke TCG, because it made the TCG -cpu max
report the presence of MTE to the guest even if the board hadn't
enabled MTE by wiring up the tag RAM. This meant that if the guest
then tried to use MTE QEMU would segfault accessing the
non-existent tag RAM:
==346473==ERROR: UndefinedBehaviorSanitizer: SEGV on unknown address (pc 0x55f328952a4a bp 0x00000213a400 sp 0x7f7871859b80 T346476)
==346473==The signal is caused by a READ memory access.
==346473==Hint: this fault was caused by a dereference of a high value address (see register values below). Disassemble the provided pc to learn which register was used.
#0 0x55f328952a4a in address_space_to_flatview /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:1108:12
#1 0x55f328952a4a in address_space_translate /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:2797:31
#2 0x55f328952a4a in allocation_tag_mem /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:176:10
#3 0x55f32895366c in helper_stgm /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:461:15
#4 0x7f782431a293 (<unknown module>)
It's also not clear that the KVM logic is correct either:
MTE defaults to on there, rather than being only on if the
board wants it on.
Revert the whole commit for now so we can sort out the issues.
(We didn't catch this in CI because we have no test cases in
avocado that use guests with MTE support.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230519145808.348701-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extend the 'mte' property for the virt machine to cover KVM as
well. For KVM, we don't allocate tag memory, but instead enable the
capability.
If MTE has been enabled, we need to disable migration, as we do not
yet have a way to migrate the tags as well. Therefore, MTE will stay
off with KVM unless requested explicitly.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230428095533.21747-2-cohuck@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvm_arm_init_debug() used to be called several times on a SMP system as
kvm_arch_init_vcpu() calls it. Move the call to kvm_arch_init() to make
sure it will be called only once; otherwise it will overwrite pointers
to memory allocated with the previous call and leak it.
Fixes: e4482ab7e3 ("target-arm: kvm - add support for HW assisted debug")
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230405153644.25300-1-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In Armv8.6, a new AArch32 ID register ID_DFR1 is defined; implement
it. We don't have any CPUs with features that they need to advertise
here yet, but plumbing in the ID register gives it the right name
when debugging and will help in future when we do add a CPU that
has non-zero ID_DFR1 fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-5-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In Armv8.6 a new AArch32 ID register ID_MMFR5 is defined.
Implement this; we want to be able to use it to report to
the guest that we implement FEAT_ETS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-4-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The code that reads the AArch32 ID registers from KVM in
kvm_arm_get_host_cpu_features() does so almost but not quite in
encoding order. Move the read of ID_PFR2 down so it's really in
encoding order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220819110052.2942289-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The test for the IF block indicates no ID registers are exposed, much
less host support for SVE. Move the SVE probe into the ELSE block.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220726045828.53697-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because we weren't setting this flag, our probe of ID_AA64ZFR0
was always returning zero. This also obviates the adjustment
of ID_AA64PFR0, which had sanitized the SVE field.
The effects of the bug are not visible, because the only thing that
ID_AA64ZFR0 is used for within qemu at present is tcg translation.
The other tests for SVE within KVM are via ID_AA64PFR0.SVE.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220726045828.53697-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Indication for support for SVE will not depend on whether we
perform the query on the main kvm_state or the temp vcpu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220726045828.53697-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pull the three sve_vq_* values into a structure.
This will be reused for SME.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This register is allocated from the existing block of id registers,
so it is already RES0 for cpus that do not implement SME.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220607203306.657998-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The bitmap need only hold 15 bits; bitmap is over-complicated.
We can simplify operations quite a bit with plain logical ops.
The introduction of SVE_VQ_POW2_MAP eliminates the need for
looping in order to search for powers of two. Simply perform
the logical ops and use count leading or trailing zeros as
required to find the result.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220607203306.657998-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we give all the v7-and-up CPUs a PMU with 4 counters. This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.
Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.
This means that we now supply 6 counters instead of 4 for:
Cortex-A9, Cortex-A15, Cortex-A53, Cortex-A57, Cortex-A72,
Cortex-A76, Neoverse-N1, '-cpu max'
This CPU goes from 4 to 8 counters:
A64FX
These CPUs remain with 4 counters:
Cortex-A7, Cortex-A8
This CPU goes down from 4 to 3 counters:
Cortex-R5
Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset. This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.
This change was originally landed in commit f7fb73b8cd (during
the 6.0 release cycle) but was then reverted by commit
21c2dd77a6 before that release because it did not work with KVM.
This version fixes that by creating the scratch vCPU in
kvm_arm_get_host_cpu_features() with the KVM_ARM_VCPU_PMU_V3 feature
if KVM supports it, and then only asking KVM for the PMCR_EL0 value
if the vCPU has a PMU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Added the correct value for a64fx]
Message-id: 20220513122852.4063586-1-peter.maydell@linaro.org
While defining these names, use the correct field width of 5 not 4 for
DBGWCR.MASK. This typo prevented setting a watchpoint larger than 32k.
Reported-by: Chris Howard <cvz185@web.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220427051926.295223-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we're using KVM, the PSCI implementation is provided by the
kernel, but QEMU has to tell the guest about it via the device tree.
Currently we look at the KVM_CAP_ARM_PSCI_0_2 capability to determine
if the kernel is providing at least PSCI 0.2, but if the kernel
provides a newer version than that we will still only tell the guest
it has PSCI 0.2. (This is fairly harmless; it just means the guest
won't use newer parts of the PSCI API.)
The kernel exposes the specific PSCI version it is implementing via
the ONE_REG API; use this to report in the dtb that the PSCI
implementation is 1.0-compatible if appropriate. (The device tree
binding currently only distinguishes "pre-0.2", "0.2-compatible" and
"1.0-compatible".)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220224134655.1207865-1-peter.maydell@linaro.org
Support the latest PSCI on TCG and HVF. A 64-bit function called from
AArch32 now returns NOT_SUPPORTED, which is necessary to adhere to SMC
Calling Convention 1.0. It is still not compliant with SMCCC 1.3 since
they do not implement mandatory functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220213035753.34577-1-akihiko.odaki@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: update MISMATCH_CHECK checks on PSCI_VERSION macros to match]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add basic support for Pointer Authentication when running a KVM
guest and that the host supports it, loosely based on the SVE
support.
Although the feature is enabled by default when the host advertises
it, it is possible to disable it by setting the 'pauth=off' CPU
property. The 'pauth' comment is removed from cpu-features.rst,
as it is now common to both TCG and KVM.
Tested on an Apple M1 running 5.16-rc6.
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220107150154.2490308-1-maz@kernel.org
[PMM: fixed indentation]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bitmap_clear() only clears the given range. While the given
range should be sufficient in this case we might as well be
100% sure all bits are zeroed by using bitmap_zero().
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virt_is_acpi_enabled() function is specific to the virt board, as
is the check for its 'ras' property. Use the new acpi_ghes_present()
function to check whether we should report memory errors via
acpi_ghes_record_errors().
This avoids a link error if QEMU was built without support for the
virt board, and provides a mechanism that can be used by any future
board models that want to add ACPI memory error reporting support
(they only need to call acpi_ghes_add_fw_cfg()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Message-id: 20210603171259.27962-4-peter.maydell@linaro.org
Will be used for SVE2 isa subset enablement.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit f7fb73b8cd.
This change turned out to be a bit half-baked, and doesn't
work with KVM, which fails with the error:
"qemu-system-aarch64: Failed to retrieve host CPU features"
because KVM does not allow accessing of the PMCR_EL0 value in
the scratch "query CPU ID registers" VM unless we have first
set the KVM_ARM_VCPU_PMU_V3 feature on the VM.
Revert the change for 6.0.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20210331154822.23332-1-peter.maydell@linaro.org
Currently we give all the v7-and-up CPUs a PMU with 4 counters. This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.
Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.
This means that we now supply 6 counters for Cortex-A53, A57, A72,
A15 and A9 as well as '-cpu max'; Cortex-A7 and A8 stay at 4; and
Cortex-R5 goes down to 3.
Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset. This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20210311165947.27470-1-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
cc->do_interrupt is in theory a TCG callback used in accel/tcg only,
to prepare the emulated architecture to take an interrupt as defined
in the hardware specifications,
but in reality the _do_interrupt style of functions in targets are
also occasionally reused by KVM to prepare the architecture state in a
similar way where userspace code has identified that it needs to
deliver an exception to the guest.
In the case of ARM, that includes:
1) the vcpu thread got a SIGBUS indicating a memory error,
and we need to deliver a Synchronous External Abort to the guest to
let it know about the error.
2) the kernel told us about a debug exception (breakpoint, watchpoint)
but it is not for one of QEMU's own gdbstub breakpoints/watchpoints
so it must be a breakpoint the guest itself has set up, therefore
we need to deliver it to the guest.
So in order to reuse code, the same arm_do_interrupt function is used.
This is all fine, but we need to avoid calling it using the callback
registered in CPUClass, since that one is now TCG-only.
Fortunately this is easily solved by replacing calls to
CPUClass::do_interrupt() with explicit calls to arm_do_interrupt().
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210204163931.7358-9-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This was defined at some point before ARMv8.4, and will
shortly be used by new processor descriptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We add the kvm-steal-time CPU property and implement it for machvirt.
A tiny bit of refactoring was also done to allow pmu and pvtime to
use the same vcpu device helper functions.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the id_pfr0 and id_pfr1 fields into the ARMISARegisters
sub-struct. We're going to want id_pfr1 for an isar_features
check, and moving both at the same time avoids an odd
inconsistency.
Changes other than the ones to cpu.h and kvm64.c made
automatically with:
perl -p -i -e 's/cpu->id_pfr/cpu->isar.id_pfr/' target/arm/*.c hw/intc/armv7m_nvic.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-3-peter.maydell@linaro.org
There are other platforms which also have CPUs that start powered off, so
generalize the start-powered-off property so that it can be used by them.
Note that ARMv7MState also has a property of the same name but this patch
doesn't change it because that class isn't a subclass of CPUState so it
wouldn't be a trivial change.
This change should not cause any change in behavior.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-2-bauerman@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Injecting external data abort through KVM might trigger
an issue on kernels that do not get updated to include the KVM fix.
For those and aarch32 guests, the injected abort gets misconfigured
to be an implementation defined exception. This leads to the guest
repeatedly re-running the faulting instruction.
Add support for handling that case.
[
Fixed-by: 018f22f95e8a
('KVM: arm: Fix DFSR setting for non-LPAE aarch32 guests')
Fixed-by: 21aecdbd7f3a
('KVM: arm: Make inject_abt32() inject an external abort instead')
]
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Acked-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200629114110.30723-3-beata.michalska@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit d70c996df2, when enabling the PMU we get:
$ qemu-system-aarch64 -cpu host,pmu=on -M virt,accel=kvm,gic-version=3
Segmentation fault (core dumped)
Thread 1 "qemu-system-aar" received signal SIGSEGV, Segmentation fault.
0x0000aaaaaae356d0 in kvm_ioctl (s=0x0, type=44547) at accel/kvm/kvm-all.c:2588
2588 ret = ioctl(s->fd, type, arg);
(gdb) bt
#0 0x0000aaaaaae356d0 in kvm_ioctl (s=0x0, type=44547) at accel/kvm/kvm-all.c:2588
#1 0x0000aaaaaae31568 in kvm_check_extension (s=0x0, extension=126) at accel/kvm/kvm-all.c:916
#2 0x0000aaaaaafce254 in kvm_arm_pmu_supported (cpu=0xaaaaac214ab0) at target/arm/kvm.c:213
#3 0x0000aaaaaafc0f94 in arm_set_pmu (obj=0xaaaaac214ab0, value=true, errp=0xffffffffe438) at target/arm/cpu.c:1111
#4 0x0000aaaaab5533ac in property_set_bool (obj=0xaaaaac214ab0, v=0xaaaaac223a80, name=0xaaaaac11a970 "pmu", opaque=0xaaaaac222730, errp=0xffffffffe438) at qom/object.c:2170
#5 0x0000aaaaab5512f0 in object_property_set (obj=0xaaaaac214ab0, v=0xaaaaac223a80, name=0xaaaaac11a970 "pmu", errp=0xffffffffe438) at qom/object.c:1328
#6 0x0000aaaaab551e10 in object_property_parse (obj=0xaaaaac214ab0, string=0xaaaaac11b4c0 "on", name=0xaaaaac11a970 "pmu", errp=0xffffffffe438) at qom/object.c:1561
#7 0x0000aaaaab54ee8c in object_apply_global_props (obj=0xaaaaac214ab0, props=0xaaaaac018e20, errp=0xaaaaabd6fd88 <error_fatal>) at qom/object.c:407
#8 0x0000aaaaab1dd5a4 in qdev_prop_set_globals (dev=0xaaaaac214ab0) at hw/core/qdev-properties.c:1218
#9 0x0000aaaaab1d9fac in device_post_init (obj=0xaaaaac214ab0) at hw/core/qdev.c:1050
...
#15 0x0000aaaaab54f310 in object_initialize_with_type (obj=0xaaaaac214ab0, size=52208, type=0xaaaaabe237f0) at qom/object.c:512
#16 0x0000aaaaab54fa24 in object_new_with_type (type=0xaaaaabe237f0) at qom/object.c:687
#17 0x0000aaaaab54fa80 in object_new (typename=0xaaaaabe23970 "host-arm-cpu") at qom/object.c:702
#18 0x0000aaaaaaf04a74 in machvirt_init (machine=0xaaaaac0a8550) at hw/arm/virt.c:1770
#19 0x0000aaaaab1e8720 in machine_run_board_init (machine=0xaaaaac0a8550) at hw/core/machine.c:1138
#20 0x0000aaaaaaf95394 in qemu_init (argc=5, argv=0xffffffffea58, envp=0xffffffffea88) at softmmu/vl.c:4348
#21 0x0000aaaaaada3f74 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at softmmu/main.c:48
This is because in frame #2, cpu->kvm_state is still NULL
(the vCPU is not yet realized).
KVM has a hard requirement of all cores supporting the same
feature set. We only need to check if the accelerator supports
a feature, not each vCPU individually.
Fix by removing the 'CPUState *cpu' argument from the
kvm_arm_<FEATURE>_supported() functions.
Fixes: d70c996df2 ('Use CPUState::kvm_state in kvm_arm_pmu_supported')
Reported-by: Haibo Xu <haibo.xu@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a SIGBUS signal handler. In this handler, it checks the SIGBUS type,
translates the host VA delivered by host to guest PA, then fills this PA
to guest APEI GHES memory, then notifies guest according to the SIGBUS
type.
When guest accesses the poisoned memory, it will generate a Synchronous
External Abort(SEA). Then host kernel gets an APEI notification and calls
memory_failure() to unmapped the affected page in stage 2, finally
returns to guest.
Guest continues to access the PG_hwpoison page, it will trap to KVM as
stage2 fault, then a SIGBUS_MCEERR_AR synchronous signal is delivered to
Qemu, Qemu records this error address into guest APEI GHES memory and
notifes guest using Synchronous-External-Abort(SEA).
In order to inject a vSEA, we introduce the kvm_inject_arm_sea() function
in which we can setup the type of exception and the syndrome information.
When switching to guest, the target vcpu will jump to the synchronous
external abort vector table entry.
The ESR_ELx.DFSC is set to synchronous external abort(0x10), and the
ESR_ELx.FnV is set to not valid(0x1), which will tell guest that FAR is
not valid and hold an UNKNOWN value. These values will be set to KVM
register structures through KVM_SET_ONE_REG IOCTL.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200512030609.19593-10-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to move the inlined declarations of set_feature()
from cpu*.c to cpu.h. To avoid clashing with the KVM
declarations, inline the few KVM calls.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200504172448.9402-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
KVM_SET_VCPU_EVENTS might actually lead to vcpu registers being modified.
As such this should be the last step of sync to avoid potential overwriting
of whatever changes KVM might have done.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200312003401.29017-2-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have converted all tests against these features
to ISAR tests.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224222232.13807-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The isar_feature_aa32_pan and isar_feature_aa32_ats1e1 functions
are supposed to be testing fields in ID_MMFR3; but a cut-and-paste
error meant we were looking at MVFR0 instead.
Fix the functions to look at the right register; this requires
us to move at least id_mmfr3 to the ARMISARegisters struct; we
choose to move all the ID_MMFRn registers for consistency.
Fixes: 3d6ad6bb46
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214175116.9164-19-peter.maydell@linaro.org
Now we have isar_feature test functions that look at fields in the
ID_AA64DFR0_EL1 and ID_DFR0 ID registers, add the code that reads
these register values from KVM so that the checks behave correctly
when we're using KVM.
No isar_feature function tests ID_AA64DFR1_EL1 or DBGDIDR yet, but we
add it to maintain the invariant that every field in the
ARMISARegisters struct is populated for a KVM CPU and can be relied
on. This requirement isn't actually written down yet, so add a note
to the relevant comment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214175116.9164-13-peter.maydell@linaro.org
Add definitions for all of the fields, up to ARMv8.5.
Convert the existing RESERVED register to a full register.
Query KVM for the value of the register for the host.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200208125816.14954-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a VM is stopped (such as when it's paused) guest virtual time
should stop counting. Otherwise, when the VM is resumed it will
experience time jumps and its kernel may report soft lockups. Not
counting virtual time while the VM is stopped has the side effect
of making the guest's time appear to lag when compared with real
time, and even with time derived from the physical counter. For
this reason, this change, which is enabled by default, comes with
a KVM CPU feature allowing it to be disabled, restoring legacy
behavior.
This patch only provides the implementation of the virtual time
adjustment. A subsequent patch will provide the CPU property
allowing the change to be enabled and disabled.
Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200120101023.16030-6-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the missing GENERIC_TIMER feature to kvm64 cpus.
We don't currently use these registers when KVM is enabled, but it's
probably best we add the feature flag for consistency and potential
future use. There's also precedent, as we add the PMU feature flag to
KVM enabled guests, even though we don't use those registers either.
This change was originally posted as a hunk of a different, never
merged patch from Bijan Mottahedeh.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200120101023.16030-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
+a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
=TD0Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
