We set bdi->unallocated_blocks_are_zero = iscsilun->lbprz, but
iscsi_co_block_status doesn't return 0 in case of iscsilun->lbprz, it
returns ZERO when appropriate. So actually unallocated_blocks_are_zero
is useless (it doesn't affect the only user of the field:
bdrv_co_block_status()). Drop it now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-7-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's false by default, no needs to set it. We are going to drop this
variable at all, so drop it now here, it doesn't hurt.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In case when get_image_offset() returns -1, we do zero out the
corresponding chunk of qiov. So, this should be reported as ZERO.
Note that this changes visible output of "qemu-img map --output=json"
and "qemu-io -c map" commands. For qemu-img map, the change is obvious:
we just mark as zero what is really zero. For qemu-io it's less
obvious: what was unallocated now is allocated.
There is an inconsistency in understanding of unallocated regions in
Qemu: backing-supporting format-drivers return 0 block-status to report
go-to-backing logic for this area. Some protocol-drivers (iscsi) return
0 to report fs-unallocated-non-zero status (i.e., don't occupy space on
disk, read result is undefined).
BDRV_BLOCK_ALLOCATED is defined as something more close to
go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from
iscsi is treated as unallocated. It doesn't influence backing-chain
behavior, as iscsi can't have backing file. But it does influence
"qemu-io -c map".
We should solve this inconsistency at some future point. Now, let's
just make backing-not-supporting format drivers (vdi in the previous
patch and vpc now) to behave more like backing-supporting drivers
and not report 0 block-status. More over, returning ZERO status is
absolutely valid thing, and again, corresponds to how the other
format-drivers (backing-supporting) work.
After block-status update, it never reports 0, so setting
unallocated_blocks_are_zero doesn't make sense (as the only user of it
is bdrv_co_block_status and it checks unallocated_blocks_are_zero only
for unallocated areas). Drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com>
[mreitz: qemu-io -c map as used by iotest 146 now reports everything as
allocated; in order to make the test do something useful, we
use qemu-img map --output=json now]
Signed-off-by: Max Reitz <mreitz@redhat.com>
In case of !VDI_IS_ALLOCATED[], we do zero out the corresponding chunk
of qiov. So, this should be reported as ZERO.
Note that this changes visible output of "qemu-img map --output=json"
and "qemu-io -c map" commands. For qemu-img map, the change is obvious:
we just mark as zero what is really zero. For qemu-io it's less
obvious: what was unallocated now is allocated.
There is an inconsistency in understanding of unallocated regions in
Qemu: backing-supporting format-drivers return 0 block-status to report
go-to-backing logic for this area. Some protocol-drivers (iscsi) return
0 to report fs-unallocated-non-zero status (i.e., don't occupy space on
disk, read result is undefined).
BDRV_BLOCK_ALLOCATED is defined as something more close to
go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from
iscsi is treated as unallocated. It doesn't influence backing-chain
behavior, as iscsi can't have backing file. But it does influence
"qemu-io -c map".
We should solve this inconsistency at some future point. Now, let's
just make backing-not-supporting format drivers (vdi at this patch and
vpc with the following) to behave more like backing-supporting drivers
and not report 0 block-status. More over, returning ZERO status is
absolutely valid thing, and again, corresponds to how the other
format-drivers (backing-supporting) work.
After block-status update, it never reports 0, so setting
unallocated_blocks_are_zero doesn't make sense (as the only user of it
is bdrv_co_block_status and it checks unallocated_blocks_are_zero only
for unallocated areas). Drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-4-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The function has only one user: bdrv_co_block_status(). Inline it to
simplify reviewing of the following patches, which will finally drop
unallocated_blocks_are_zero field too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-3-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently the implementation only supports amending the encryption
options, unlike the qemu-img version
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-14-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-13-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
blockdev-amend will be used similiar to blockdev-create
to allow on the fly changes of the structure of the format based block devices.
Current plan is to first support encryption keyslot management for luks
based formats (raw and embedded in qcow2)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-12-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that we have all the infrastructure in place,
wire it in the qcow2 driver and expose this to the user.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-9-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This implements the encryption key management using the generic code in
qcrypto layer and exposes it to the user via qemu-img
This code adds another 'write_func' because the initialization
write_func works directly on the underlying file, and amend
works on instance of luks device.
This commit also adds a 'hack/workaround' I and Kevin Wolf (thanks)
made to make the driver both support write sharing (to avoid breaking the users),
and be safe against concurrent metadata update (the keyslots)
Eventually the write sharing for luks driver will be deprecated
and removed together with this hack.
The hack is that we ask (as a format driver) for BLK_PERM_CONSISTENT_READ
and then when we want to update the keys, we unshare that permission.
So if someone else has the image open, even readonly, encryption
key update will fail gracefully.
Also thanks to Daniel Berrange for the idea of
unsharing read, rather that write permission which allows
to avoid cases when the other user had opened the image read-only.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-8-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
rename the write_func to create_write_func, and init_func to create_init_func.
This is preparation for other write_func that will be used to update the encryption keys.
No functional changes
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-7-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some qcow2 create options can't be used for amend.
Remove them from the qcow2 create options and add generic logic to detect
such options in qemu-img
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[mreitz: Dropped some iotests reference output hunks that became
unnecessary thanks to
"iotests: Make _filter_img_create more active"]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-12-mreitz@redhat.com>
Some options are only useful for creation
(or hard to be amended, like cluster size for qcow2), while some other
options are only useful for amend, like upcoming keyslot management
options for luks
Since currently only qcow2 supports amend, move all its options
to a common macro and then include it in each action option list.
In future it might be useful to remove some options which are
not supported anyway from amend list, which currently
cause an error message if amended.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-5-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
'force' option will be used for some unsafe amend operations.
This includes things like erasing last keyslot in luks based formats
(which destroys the data, unless the master key is backed up
by external means), but that _might_ be desired result.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-4-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will be used first to implement luks keyslot management.
block_crypto_amend_opts_init will be used to convert
qemu-img cmdline to QCryptoBlockAmendOptions
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-2-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When resizing an image with qcow2_co_truncate() using the falloc or
full preallocation modes the code assumes that both the old and new
sizes are cluster-aligned.
There are two problems with this:
1) The calculation of how many clusters are involved does not always
get the right result.
Example: creating a 60KB image and resizing it (with
preallocation=full) to 80KB won't allocate the second cluster.
2) No copy-on-write is performed, so in the previous example if
there is a backing file then the first 60KB of the first cluster
won't be filled with data from the backing file.
This patch fixes both issues.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200617140036.20311-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
ret may be > 0 on success path at this point. Fix assertion, which may
crash currently.
Fixes: 4ce5dd3e9b
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200526181347.489557-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
array_remove_slice() calls array_roll() with array->next - 1 as the
destination index. This is only correct for count == 1, otherwise we're
writing past the end of the array. array->next - count would be correct.
However, this is the only place ever calling array_roll(), so this
rather complicated operation isn't even necessary.
Fix the problem and simplify the code by replacing it with a single
memmove() call. array_roll() can now be removed.
Reported-by: Nathan Huckleberry <nhuck15@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200623175534.38286-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
FAT allows only a restricted set of characters in file names, and for
some of the illegal characters, it's actually important that we catch
them: If filenames can contain '/', the guest can construct filenames
containing "../" and escape from the assigned vvfat directory. The same
problem could arise if ".." was ever accepted as a literal filename.
Fix this by adding a check that all filenames are valid in
check_directory_consistency().
Reported-by: Nathan Huckleberry <nhuck15@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200623175534.38286-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU block drivers are supposed to support aio_poll() from I/O
completion callback functions. This means completion processing must be
re-entrant.
The standard approach is to schedule a BH during completion processing
and cancel it at the end of processing. If aio_poll() is invoked by a
callback function then the BH will run. The BH continues the suspended
completion processing.
All of this means that request A's cb() can synchronously wait for
request B to complete. Previously the nvme block driver would hang
because it didn't process completions from nested aio_poll().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200617132201.1832152-8-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Passing around both BDRVNVMeState and NVMeQueuePair is unwieldy. Reduce
the number of function arguments by keeping the BDRVNVMeState pointer in
NVMeQueuePair. This will come in handly when a BH is introduced in a
later patch and only one argument can be passed to it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200617132201.1832152-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There are three issues with the current NVMeRequest->busy field:
1. The busy field is accidentally accessed outside q->lock when request
submission fails.
2. Waiters on free_req_queue are not woken when a request is returned
early due to submission failure.
2. Finding a free request involves scanning all requests. This makes
request submission O(n^2).
Switch to an O(1) freelist that is always accessed under the lock.
Also differentiate between NVME_QUEUE_SIZE, the actual SQ/CQ size, and
NVME_NUM_REQS, the number of usable requests. This makes the code
simpler than using NVME_QUEUE_SIZE everywhere and having to keep in mind
that one slot is reserved.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200617132201.1832152-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Do not access a CQE after incrementing q->cq.head and releasing q->lock.
It is unlikely that this causes problems in practice but it's a latent
bug.
The reason why it should be safe at the moment is that completion
processing is not re-entrant and the CQ doorbell isn't written until the
end of nvme_process_completion().
Make this change now because QEMU expects completion processing to be
re-entrant and later patches will do that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200617132201.1832152-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A lot of CPU time is spent simply locking/unlocking q->lock during
polling. Check for completion outside the lock to make q->lock disappear
from the profile.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200617132201.1832152-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For now, we don't have persistent bitmaps in any other formats, but
that might not be true in the future. Make it obvious that our
incoming parameter is not necessarily a qcow2 image, and therefore is
limited to just the bdrv_dirty_bitmap_* API calls (rather than probing
into qcow2 internals).
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200608190821.3293867-1-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rather than listing block/monitor from the top-level Makefile.objs, we
should instead list monitor from block/Makefile.objs.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Fixes: bb4e58c613
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200608173339.3244211-1-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 93676c88 relaxed our NBD client code to request export names up
to the NBD protocol maximum of 4096 bytes without NUL terminator, even
though the block layer can't store anything longer than 4096 bytes
including NUL terminator for display to the user. Since this means
there are some export names where we have to truncate things, we can
at least try to make the truncation a bit more obvious for the user.
Note that in spite of the truncated display name, we can still
communicate with an NBD server using such a long export name; this was
deemed nicer than refusing to even connect to such a server (since the
server may not be under our control, and since determining our actual
length limits gets tricky when nbd://host:port/export and
nbd+unix:///export?socket=/path are themselves variable-length
expansions beyond the export name but count towards the block layer
name length).
Reported-by: Xueqiang Wei <xuwei@redhat.com>
Fixes: https://bugzilla.redhat.com/1843684
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200610163741.3745251-3-eblake@redhat.com>
We have a few bdrv_*() functions that can either spawn a new coroutine
and wait for it with BDRV_POLL_WHILE() or use a fastpath if they are
alreeady running in a coroutine. All of them duplicate basically the
same code.
Factor the common code into a new function bdrv_run_co().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20200520144901.16589-1-vsementsov@virtuozzo.com
[Factor out bdrv_run_co_entry too]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In qemu_luring_poll_cb() we are not using the cqe peeked from the
CQ ring. We are using io_uring_peek_cqe() only to see if there
are cqes ready, so we can replace it with io_uring_cq_ready().
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20200519134942.118178-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As recently documented [1], io_uring_enter(2) syscall can return an
error (errno=EINTR) if the operation was interrupted by a delivery
of a signal before it could complete.
This should happen when IORING_ENTER_GETEVENTS flag is used, for
example during io_uring_submit_and_wait() or during io_uring_submit()
when IORING_SETUP_IOPOLL is enabled.
We shouldn't have this problem for now, but it's better to prevent it.
[1] 344355ec66
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20200519133041.112138-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It's useful to know how much space can be occupied by qcow2 persistent
bitmaps, even though such metadata is unrelated to the guest-visible
data. Report this value as an additional QMP field, present when
measuring an existing image and output format that both support
bitmaps. Update iotest 178 and 190 to updated output, as well as new
coverage in 190 demonstrating non-zero values made possible with the
recently-added qemu-img bitmap command (see 3b51ab4b).
The new 'bitmaps size:' field is displayed automatically as part of
'qemu-img measure' any time it is present in QMP (that is, any time
both the source image being measured and destination format support
bitmaps, even if the measurement is 0 because there are no bitmaps
present). If the field is absent, it means that no bitmaps can be
copied (source, destination, or both lack bitmaps, including when
measuring based on size rather than on a source image). This behavior
is compatible with an upcoming patch adding 'qemu-img convert
--bitmaps': that command will fail in the same situations where this
patch omits the field.
The addition of a new field demonstrates why we should always
zero-initialize qapi C structs; while the qcow2 driver still fully
populates all fields, the raw and crypto drivers had to be tweaked to
avoid uninitialized data.
Consideration was also given towards having a 'qemu-img measure
--bitmaps' which errors out when bitmaps are not possible, and
otherwise sums the bitmaps into the existing allocation totals rather
than displaying as a separate field, as a potential convenience
factor. But this was ultimately decided to be more complexity than
necessary when the QMP interface was sufficient enough with bitmaps
remaining a separate field.
See also: https://bugzilla.redhat.com/1779904
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521192137.1120211-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
To be used for bitmap migration in further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521220648.3255-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Upcoming patches want to add some basic bitmap manipulation abilities
to qemu-img. But blockdev.o is too heavyweight to link into qemu-img
(among other things, it would drag in block jobs and transaction
support - qemu-img does offline manipulation, where atomicity is less
important because there are no concurrent modifications to compete
with), so it's time to split off the bare bones of what we will need
into a new file block/monitor/bitmap-qmp-cmds.o.
This is sufficient to expose 6 QMP commands for use by qemu-img (add,
remove, clear, enable, disable, merge), as well as move the three
helper functions touched in the previous patch. Regarding
MAINTAINERS, the new file is automatically part of block core, but
also makes sense as related to other dirty bitmap files.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513011648.166876-6-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Upcoming patches will enhance bitmap support in qemu-img, but in doing
so, it turns out to be nice to suppress output when persistent bitmaps
make no sense (such as on a qcow2 v2 image). Add a hook to make this
easier to query.
This patch adds a new callback .bdrv_supports_persistent_dirty_bitmap,
rather than trying to shoehorn the answer in via existing callbacks.
In particular, while it might have been possible to overload
.bdrv_co_can_store_new_dirty_bitmap to special-case a NULL input to
answer whether any persistent bitmaps are supported, that is at odds
with whether a particular bitmap can be stored (for example, even on
an image that supports persistent bitmaps but has currently filled up
the maximum number of bitmaps, attempts to store another one should
fail); and the new functionality doesn't require coroutine safety.
Similarly, we could have added one more piece of information to
.bdrv_get_info, but then again, most callers to that function tend to
already discard extraneous information, and making it a catch-all
rather than a series of dedicated scalar queries hasn't really
simplified life.
In the future, when we improve the ability to look up bitmaps through
a filter, we will probably also want to teach the block layer to
automatically let filters pass this request on through.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513011648.166876-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
block_copy_do_copy() is static, only used in block_copy_task_entry
with the error_is_read argument set. No need to check for it,
simplify.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200507121129.29760-3-philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix when building with -Os:
CC block/block-copy.o
block/block-copy.c: In function ‘block_copy_task_entry’:
block/block-copy.c:428:38: error: ‘error_is_read’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
428 | t->call_state->error_is_read = error_is_read;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200507121129.29760-2-philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implementations should decide the necessary permissions based on @role.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-35-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These calls have no real use for the child role yet, but it will not
harm to give one.
Notably, the bdrv_root_attach_child() call in blockjob.c is left
unmodified because there is not much the generic BlockJob object wants
from its children.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-34-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_default_perms() can decide which permission profile to use based on
the BdrvChildRole, so block drivers do not need to select it explicitly.
The blkverify driver now no longer shares the WRITE permission for the
image to verify. We thus have to adjust two places in
test-block-iothread not to take it. (Note that in theory, blkverify
should behave like quorum in this regard and share neither WRITE nor
RESIZE for both of its children. In practice, it does not really
matter, because blkverify is used only for debugging, so we might as
well keep its permissions rather liberal.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-30-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace child_file by child_of_bds in all remaining places (excluding
tests).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-28-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Note that some filters have secondary children, namely blkverify (the
image to be verified) and blklogwrites (the log). This patch does not
touch those children.
Note that for blkverify, the filtered child should not be format-probed.
While there is nothing enforcing this here, in practice, it will not be:
blkverify implements .bdrv_file_open. The block layer ensures (and in
fact, asserts) that BDRV_O_PROTOCOL is set for every BDS whose driver
implements .bdrv_file_open. This flag will then be bequeathed to
blkverify's children, and they will thus (by default) not be probed
either.
("By default" refers to the fact that blkverify's other child (the
non-filtered one) will have BDRV_O_PROTOCOL force-unset, because that is
what happens for all non-filtered children of non-format drivers.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-27-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commonly, they need to pass the BDRV_CHILD_IMAGE set as the
BdrvChildRole; but there are exceptions for drivers with external data
files (qcow2 and vmdk).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-26-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make all parents of backing files pass the appropriate BdrvChildRole.
By doing so, we can switch their BdrvChildClass over to the generic
child_of_bds, which will do the right thing when given a correct
BdrvChildRole.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-24-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Both users (quorum and blkverify) use child_format for
not-really-filtered children, so the appropriate BdrvChildRole in both
cases is DATA. (Note that this will cause bdrv_inherited_options() to
force-allow format probing.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-22-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Split raw_read_options() into one function that actually just reads the
options, and another that applies them. This will allow us to detect
whether the user has specified any options before attaching the file
child (so we can decide on its role based on the options).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-21-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We plan to unify the generic .inherit_options() functions. The
resulting common function will need to decide whether to force-enable
format probing, force-disable it, or leave it as-is. To make this
decision, it will need to know whether the parent node is a format node
or not (because we never want format probing if the parent is a format
node already (except for the backing chain)).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-9-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, all callers (effectively) pass 0 and no callee evaluates thie
value. Later patches will change both.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-8-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, all callers pass 0 and no callee evaluates this value. Later
patches will change both.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-7-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
