When using hugepages, rate limiting is necessary within each huge
page, since a 1G huge page can take a significant time to send, so
you end up with bursty behaviour.
Fixes: 4c011c37ec ("postcopy: Send whole huge pages")
Reported-by: Lin Ma <LMa@suse.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch adds a new migration state called wait-unplug. It is entered
after the SETUP state if failover devices are present. It will transition
into ACTIVE once all devices were succesfully unplugged from the guest.
So if a guest doesn't respond or takes long to honor the unplug request
the user will see the migration state 'wait-unplug'.
In the migration thread we query failover devices if they're are still
pending the guest unplug. When all are unplugged the migration
continues. If one device won't unplug migration will stay in wait_unplug
state.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191029114905.6856-9-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not necessary to do the check again.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191005220517.24029-4-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In normal precopy we can't do reconnection recovery - but we also
don't need to, since you can just rerun migration.
At the moment if the 'return-path' capability is on, we use
the return path in precopy to give a positive 'OK' to the end
of migration; however if migration fails then we fall into
the postcopy recovery path and hang. This fixes it by only
running the return path in the postcopy case.
Reported-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wrap the check into a function to make it easy to read.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190717005341.14140-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Various parts of the migration code do different things when they're
in postcopy mode; prior to this patch this has been 'postcopy-active'.
This patch extends 'in_postcopy' to include 'postcopy-paused' and
'postcopy-recover'.
In particular, when you set the max-postcopy-bandwidth parameter, this
only affects the current migration fd if we're 'in_postcopy';
this leads to a race in the postcopy recovery test where it increases
the speed from 4k/sec to unlimited, but that increase can get ignored
if the change is made between the point at which the reconnection
happens and it transitions back to active.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190923174942.12182-1-dgilbert@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190912024957.11780-1-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We've got max-postcopy-bandwidth parameter but it's not applied
correctly after a postcopy recovery so the recovered migration stream
will still eat the whole net bandwidth. Fix that up.
Reported-by: Xiaohui Li <xiaohli@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190906130103.20961-1-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This capability realizes simple source validation by UUID.
It's useful for live migration between hosts.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190903162246.18524-2-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eSUz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging
Header cleanup patches for 2019-08-13
# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits)
sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
Include sysemu/sysemu.h a lot less
Clean up inclusion of sysemu/sysemu.h
numa: Move remaining NUMA declarations from sysemu.h to numa.h
Include sysemu/hostmem.h less
numa: Don't include hw/boards.h into sysemu/numa.h
Include hw/boards.h a bit less
Include hw/qdev-properties.h less
Include qemu/main-loop.h less
Include qemu/queue.h slightly less
Include hw/hw.h exactly where needed
Include qom/object.h slightly less
Include exec/memory.h slightly less
Include migration/vmstate.h less
migration: Move the VMStateDescription typedef to typedefs.h
Clean up inclusion of exec/cpu-common.h
Include hw/irq.h a lot less
typedefs: Separate incomplete types and function types
ide: Include hw/ide/internal a bit less outside hw/ide/
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a
"qdev: add qdev_add_vm_change_state_handler()". This is a bad idea:
hw/qdev-core.h is widely included.
Move the declaration of qdev_add_vm_change_state_handler() to
sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h.
Touching sysemu/sysemu.h now recompiles some 1800 objects.
qemu/uuid.h also drops from 5400 to 1800. A few more headers show
smaller improvement: qemu/notify.h drops from 5600 to 5200,
qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from
5500 to 5000.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-28-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This patch fix a multifd migration bug in migration speed calculation, this
problem can be reproduced as follows:
1. start a vm and give a heavy memory write stress to prevent the vm be
successfully migrated to destination
2. begin a migration with multifd
3. migrate for a long time [actually, this can be measured by transferred bytes]
4. migrate cancel
5. begin a new migration with multifd, the migration will directly run into
migration_completion phase
Reason as follows:
Migration update bandwidth and s->threshold_size in function
migration_update_counters after BUFFER_DELAY time:
current_bytes = migration_total_bytes(s);
transferred = current_bytes - s->iteration_initial_bytes;
time_spent = current_time - s->iteration_start_time;
bandwidth = (double)transferred / time_spent;
s->threshold_size = bandwidth * s->parameters.downtime_limit;
In multifd migration, migration_total_bytes function return
qemu_ftell(s->to_dst_file) + ram_counters.multifd_bytes.
s->iteration_initial_bytes will be initialized to 0 at every new migration,
but ram_counters is a global variable, and history migration data will be
accumulated. So if the ram_counters.multifd_bytes is big enough, it may lead
pending_size >= s->threshold_size become false in migration_iteration_run
after the first migration_update_counters.
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <1564741121-1840-1-git-send-email-ivanren@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MigrationState->bytes_xfer is only set to 0 in migrate_init().
Remove this unnecessary field.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190402003106.17614-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There is only one place to set start_postcopy to true,
qmp_migrate_start_postcopy(), which make sure start_postcopy could be
set to true when migrate_postcopy() return true.
So start_postcopy is true implies the other one.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190718083747.5859-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Consolidate time information fill up into its function for better
readability.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190716005411.4156-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, there is no information about error if outgoing migration was failed
because of file channel errors.
Example (QMP session):
-> { "execute": "migrate", "arguments": { "uri": "exec:head -c 1" }}
<- { "return": {} }
...
-> { "execute": "query-migrate" }
<- { "return": { "status": "failed" }} // There is not error's description
And even in the QEMU's output there is nothing.
This patch
1) Adds errp for the most of QEMUFileOps
2) Adds qemu_file_get_error_obj/qemu_file_set_error_obj
3) And finally using of qemu_file_get_error_obj in migration.c
And now, the status for the mentioned fail will be:
-> { "execute": "query-migrate" }
<- { "return": { "status": "failed",
"error-desc": "Unable to write to command: Broken pipe" }}
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190422103420.15686-1-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently we are doing log_clear() right after log_sync() which mostly
keeps the old behavior when log_clear() was still part of log_sync().
This patch tries to further optimize the migration log_clear() code
path to split huge log_clear()s into smaller chunks.
We do this by spliting the whole guest memory region into memory
chunks, whose size is decided by MigrationState.clear_bitmap_shift (an
example will be given below). With that, we don't do the dirty bitmap
clear operation on the remote node (e.g., KVM) when we fetch the dirty
bitmap, instead we explicitly clear the dirty bitmap for the memory
chunk for each of the first time we send a page in that chunk.
Here comes an example.
Assuming the guest has 64G memory, then before this patch the KVM
ioctl KVM_CLEAR_DIRTY_LOG will be a single one covering 64G memory.
If after the patch, let's assume when the clear bitmap shift is 18,
then the memory chunk size on x86_64 will be 1UL<<18 * 4K = 1GB. Then
instead of sending a big 64G ioctl, we'll send 64 small ioctls, each
of the ioctl will cover 1G of the guest memory. For each of the 64
small ioctls, we'll only send if any of the page in that small chunk
was going to be sent right away.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190603065056.25211-12-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <155800428514.543845.17558475870097990036.stgit@bahia.lan>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It fixes heap-use-after-free which was found by clang's ASAN.
Control flow of this use-after-free:
main_thread:
* Got SIGTERM and completes main loop
* Calls migration_shutdown
- migrate_fd_cancel (so, migration_thread begins to complete)
- object_unref(OBJECT(current_migration));
migration_thread:
* migration_iteration_finish -> schedule cleanup bh
* object_unref(OBJECT(s)); (Now, current_migration is freed)
* exits
main_thread:
* Calls vm_shutdown -> drain bdrvs -> main loop
-> cleanup_bh -> use after free
If you want to reproduce, these couple of sleeps will help:
vl.c:4613:
migration_shutdown();
+ sleep(2);
migration.c:3269:
+ sleep(1);
trace_migration_thread_after_loop();
migration_iteration_finish(s);
Original output:
qemu-system-x86_64: terminating on signal 15 from pid 31980 (<unknown process>)
=================================================================
==31958==ERROR: AddressSanitizer: heap-use-after-free on address 0x61900001d210
at pc 0x555558a535ca bp 0x7fffffffb190 sp 0x7fffffffb188
READ of size 8 at 0x61900001d210 thread T0 (qemu-vm-0)
#0 0x555558a535c9 in migrate_fd_cleanup migration/migration.c:1502:23
#1 0x5555594fde0a in aio_bh_call util/async.c:90:5
#2 0x5555594fe522 in aio_bh_poll util/async.c:118:13
#3 0x555559524783 in aio_poll util/aio-posix.c:725:17
#4 0x555559504fb3 in aio_wait_bh_oneshot util/aio-wait.c:71:5
#5 0x5555573bddf6 in virtio_blk_data_plane_stop
hw/block/dataplane/virtio-blk.c:282:5
#6 0x5555589d5c09 in virtio_bus_stop_ioeventfd hw/virtio/virtio-bus.c:246:9
#7 0x5555589e9917 in virtio_pci_stop_ioeventfd hw/virtio/virtio-pci.c:287:5
#8 0x5555589e22bf in virtio_pci_vmstate_change hw/virtio/virtio-pci.c:1072:9
#9 0x555557628931 in virtio_vmstate_change hw/virtio/virtio.c:2257:9
#10 0x555557c36713 in vm_state_notify vl.c:1605:9
#11 0x55555716ef53 in do_vm_stop cpus.c:1074:9
#12 0x55555716eeff in vm_shutdown cpus.c:1092:12
#13 0x555557c4283e in main vl.c:4617:5
#14 0x7fffdfdb482f in __libc_start_main
(/lib/x86_64-linux-gnu/libc.so.6+0x2082f)
#15 0x555556ecb118 in _start (x86_64-softmmu/qemu-system-x86_64+0x1977118)
0x61900001d210 is located 144 bytes inside of 952-byte region
[0x61900001d180,0x61900001d538)
freed by thread T6 (live_migration) here:
#0 0x555556f76782 in __interceptor_free
/tmp/final/llvm.src/projects/compiler-rt/lib/asan/asan_malloc_linux.cc:124:3
#1 0x555558d5fa94 in object_finalize qom/object.c:618:9
#2 0x555558d57651 in object_unref qom/object.c:1068:9
#3 0x555558a55588 in migration_thread migration/migration.c:3272:5
#4 0x5555595393f2 in qemu_thread_start util/qemu-thread-posix.c:502:9
#5 0x7fffe057f6b9 in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x76b9)
previously allocated by thread T0 (qemu-vm-0) here:
#0 0x555556f76b03 in __interceptor_malloc
/tmp/final/llvm.src/projects/compiler-rt/lib/asan/asan_malloc_linux.cc:146:3
#1 0x7ffff6ee37b8 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x4f7b8)
#2 0x555558d58031 in object_new qom/object.c:640:12
#3 0x555558a31f21 in migration_object_init migration/migration.c:139:25
#4 0x555557c41398 in main vl.c:4320:5
#5 0x7fffdfdb482f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2082f)
Thread T6 (live_migration) created by T0 (qemu-vm-0) here:
#0 0x555556f5f0dd in pthread_create
/tmp/final/llvm.src/projects/compiler-rt/lib/asan/asan_interceptors.cc:210:3
#1 0x555559538cf9 in qemu_thread_create util/qemu-thread-posix.c:539:11
#2 0x555558a53304 in migrate_fd_connect migration/migration.c:3332:5
#3 0x555558a72bd8 in migration_channel_connect migration/channel.c:92:5
#4 0x555558a6ef87 in exec_start_outgoing_migration migration/exec.c:42:5
#5 0x555558a4f3c2 in qmp_migrate migration/migration.c:1922:9
#6 0x555558bb4f6a in qmp_marshal_migrate qapi/qapi-commands-migration.c:607:5
#7 0x555559363738 in do_qmp_dispatch qapi/qmp-dispatch.c:131:5
#8 0x555559362a15 in qmp_dispatch qapi/qmp-dispatch.c:174:11
#9 0x5555571bac15 in monitor_qmp_dispatch monitor.c:4124:11
#10 0x55555719a22d in monitor_qmp_bh_dispatcher monitor.c:4207:9
#11 0x5555594fde0a in aio_bh_call util/async.c:90:5
#12 0x5555594fe522 in aio_bh_poll util/async.c:118:13
#13 0x5555595201e0 in aio_dispatch util/aio-posix.c:460:5
#14 0x555559503553 in aio_ctx_dispatch util/async.c:261:5
#15 0x7ffff6ede196 in g_main_context_dispatch
(/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x4a196)
SUMMARY: AddressSanitizer: heap-use-after-free migration/migration.c:1502:23
in migrate_fd_cleanup
Shadow bytes around the buggy address:
0x0c327fffb9f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c327fffba00: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c327fffba10: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c327fffba20: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c327fffba30: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
=>0x0c327fffba40: fd fd[fd]fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c327fffba50: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c327fffba60: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c327fffba70: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c327fffba80: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c327fffba90: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Shadow gap: cc
==31958==ABORTING
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190408113343.2370-1-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up comment formatting
MigrationState->xfer_limit is only set to 0 in migrate_init().
Remove this unnecessary field.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190326055726.10539-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migrate_add_blocker() asserts we have a current_migration object, in
migrate_get_current(). We do only after migration_object_init().
This contributes to the following dependency cycle:
* configure_blockdev() must run before machine_set_property()
so machine properties can refer to block backends
* machine_set_property() before configure_accelerator()
so machine properties like kvm-irqchip get applied
* configure_accelerator() before migration_object_init()
so that Xen's accelerator compat properties get applied.
* migration_object_init() before configure_blockdev()
so configure_blockdev() can add migration blockers
The cycle was closed when recent commit cda4aa9a5a "Create block
backends before setting machine properties" added the first
dependency, and satisfied it by violating the last one. Broke block
backends that add migration blockers, as demonstrated by qemu-iotests
055.
To fix it, break the last dependency: make migrate_add_blocker()
usable before migration_object_init().
The previous commit already removed the use of migrate_get_current()
from migrate_add_blocker() itself. Didn't quite do the trick, as
there's another one hiding in migration_is_idle().
The use there isn't actually necessary: when no migration object has
been created yet, migration is surely idle. Make migration_is_idle()
return true then.
Fixes: cda4aa9a5a
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190401090827.20793-4-armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This reverts commit 3df663e575.
This reverts commit b605c47b57.
Command line option --only-migratable is for disallowing any
configuration that can block migration.
Initially, --only-migratable set global variable @only_migratable.
Commit 3df663e575 "migration: move only_migratable to MigrationState"
replaced it by MigrationState member @only_migratable. That was a
mistake.
First, it doesn't make sense on the design level. MigrationState
captures the state of an individual migration, but --only-migratable
isn't a property of an individual migration, it's a restriction on
QEMU configuration. With fault tolerance, we could have several
migrations at once. --only-migratable would certainly protect all of
them. Storing it in MigrationState feels inappropriate.
Second, it contributes to a dependency cycle that manifests itself as
a bug now.
Putting @only_migratable into MigrationState means its available only
after migration_object_init().
We can't set it before migration_object_init(), so we delay setting it
with a global property (this is fixup commit b605c47b57 "migration:
fix handling for --only-migratable").
We can't get it before migration_object_init(), so anything that uses
it can only run afterwards.
Since migrate_add_blocker() needs to obey --only-migratable, any code
adding migration blockers can run only afterwards. This contributes
to the following dependency cycle:
* configure_blockdev() must run before machine_set_property()
so machine properties can refer to block backends
* machine_set_property() before configure_accelerator()
so machine properties like kvm-irqchip get applied
* configure_accelerator() before migration_object_init()
so that Xen's accelerator compat properties get applied.
* migration_object_init() before configure_blockdev()
so configure_blockdev() can add migration blockers
The cycle was closed when recent commit cda4aa9a5a "Create block
backends before setting machine properties" added the first
dependency, and satisfied it by violating the last one. Broke block
backends that add migration blockers.
Moving @only_migratable into MigrationState was a mistake. Revert it.
This doesn't quite break the "migration_object_init() before
configure_blockdev() dependency, since migrate_add_blocker() still has
another dependency on migration_object_init(). To be addressed the
next commit.
Note that the reverted commit made -only-migratable sugar for -global
migration.only-migratable=on below the hood. Documentation has only
ever mentioned -only-migratable. This commit removes the arcane &
undocumented alternative to -only-migratable again. Nobody should be
using it.
Conflicts:
include/migration/misc.h
migration/migration.c
migration/migration.h
vl.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190401090827.20793-3-armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
The recently added max-postcopy-bandwidth parameter is only read
at the transition from precopy->postcopy where as the older
max-bandwidth parameter updates the migration bandwidth when changed
even if the migration is already running.
Fix this discrepency so that:
a) You can change the bandwidth during postcopy by setting
max-postcopy-bandwidth
b) Changing max-bandwidth during postcopy has no effect
(it currently changes the postcopy bandwidth which isn't
expected).
Fixes: 7e555c6c
bz: https://bugzilla.redhat.com/show_bug.cgi?id=1686321
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The QEMU instance that runs as the server for the migration data
transport (ie the target QEMU) needs to be able to configure access
control so it can prevent unauthorized clients initiating an incoming
migration. This adds a new 'tls-authz' migration parameter that is used
to provide the QOM ID of a QAuthZ subclass instance that provides the
access control check. This is checked against the x509 certificate
obtained during the TLS handshake.
For example, when starting a QEMU for incoming migration, it is
possible to give an example identity of the source QEMU that is
intended to be connecting later:
$QEMU \
-monitor stdio \
-incoming defer \
...other args...
(qemu) object_add tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
(qemu) object_add authz-simple,id=auth0,identity=CN=laptop.example.com,,\
O=Example Org,,L=London,,ST=London,,C=GB \
(qemu) migrate_incoming tcp:localhost:9000
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We make it supported from now on.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Libvirt don't want to expose (and explain it). From now on we measure
the number of packages in bytes instead of pages, so it is the same
independently of architecture. We choose the page size of x86.
Notice that in the following patch we make this variable.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Delay to close COLO for auto start VM after failover.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190303145021.2962-4-chen.zhang@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It will be used to store the uri parameters. We want this only for
tcp, so we don't set it for other uris. We need it to know what port
is migration running.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Removed DummyStruct as suggested by Eric & Markus
--
We want to use local migration to update QEMU for running guests.
In this case we don't need to migrate shared (file backed) RAM.
So, add a capability to ignore such blocks during live migration.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190215174548.2630-3-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently we cleanup the migration object as we exit main after the
main_loop finishes; however if there's a migration running things
get messy and we can end up with the migration thread still trying
to access freed structures.
We now take a ref to the object around the migration thread itself,
so the act of dropping the ref during exit doesn't cause us to lose
the state until the thread quits.
Cancelling the migration during migration also tries to get the thread
to quit.
We do this a bit earlier; so hopefully migration gets out of the way
before all the devices etc are freed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190227164900.16378-1-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
During a cancelled migration there's a race where the fd can
go into an error state before we get back around the migration loop
and migration_detect_error transitions from cancelling->failed.
Check for cancelled/cancelling and don't change the state.
Red Hat bug: https://bugzilla.redhat.com/show_bug.cgi?id=1608649
Fixes: b23c2ade25
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190219195928.12289-1-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Switch the announcements to using the new announce timer.
Move the code that does it to announce.c rather than savevm
because it really has nothing to do with the actual migration.
Migration starts the announce from bh's and so they're all
in the main thread/bql, and so there's never any racing with
the timers themselves.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add migration parameters that control RARP/GARP announcement timeouts.
Based on earlier patches by myself and
Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The 'announce timer' will be used by migration, and explicit
requests for qemu to perform network announces.
Based on the work by Germano Veit Michel <germano@redhat.com>
and Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It introduces a new statistic, pages-per-second, as bandwidth or mbps is
not enough to measure the performance of posting pages out as we have
compression, xbzrle, which can significantly reduce the amount of the
data size, instead, pages-per-second is the one we want
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20190111063732.10484-2-xiaoguangrong@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With typo's Eric spotted fixed
In the current code, if process_incoming_migration_co() fails we do
the same error handing: set the error state, close the source file,
do the cleanup for multifd, and then exit(EXIT_FAILURE). To make the
code clearer, add a "goto fail" to unify the error handling.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190113140849.38339-6-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
multifd_save_cleanup() takes an Error ** argument and returns an
error code even though it can't actually fail. Its callers
dutifully check for failure. Remove the useless argument and return
value, and simplify the callers.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190113140849.38339-4-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In our current code, when multifd is used during migration, if there
is an error before the destination receives all new channels, the
source keeps running, however the destination does not exit but keeps
waiting until the source is killed deliberately.
Fix this by dumping the specific error and let users decide whether
to quit from the destination side when failing to receive packet via
some channel. And update the comment for multifd_recv_new_channel().
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190113140849.38339-3-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The qmp/hmp command 'system_wakeup' is simply a direct call to
'qemu_system_wakeup_request' from vl.c. This function verifies if
runstate is SUSPENDED and if the wake up reason is valid before
proceeding. However, no error or warning is thrown if any of those
pre-requirements isn't met. There is no way for the caller to
differentiate between a successful wakeup or an error state caused
when trying to wake up a guest that wasn't suspended.
This means that system_wakeup is silently failing, which can be
considered a bug. Adding error handling isn't an API break in this
case - applications that didn't check the result will remain broken,
the ones that check it will have a chance to deal with it.
Adding to that, the commit before previous created a new QMP API called
query-current-machine, with a new flag called wakeup-suspend-support,
that indicates if the guest has the capability of waking up from suspended
state. Although such guest will never reach SUSPENDED state and erroring
it out in this scenario would suffice, it is more informative for the user
to differentiate between a failure because the guest isn't suspended versus
a failure because the guest does not have support for wake up at all.
All this considered, this patch changes qmp_system_wakeup to check if
the guest is capable of waking up from suspend, and if it is suspended.
After this patch, this is the output of system_wakeup in a guest that
does not have wake-up from suspend support (ppc64):
(qemu) system_wakeup
wake-up from suspend is not supported by this guest
(qemu)
And this is the output of system_wakeup in a x86 guest that has the
support but isn't suspended:
(qemu) system_wakeup
Unable to wake up: guest is not in suspended state
(qemu)
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20181205194701.17836-4-danielhb413@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Current COLO mode(independent disk mode) need replication module work
together. Suggested by Dr. David Alan Gilbert <dgilbert@redhat.com>.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20181114190912.7242-1-chen.zhang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
During an active background migration, snapshot will trigger a
segmentfault. As snapshot clears the "current_migration" struct
and updates "to_dst_file" before it finds out that there is a
migration task, Migration accesses the null pointer in
"current_migration" struct and qemu crashes eventually.
Signed-off-by: Jia Lina <jialina01@baidu.com>
Signed-off-by: Chai Wen <chaiwen@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20181026083620.10172-1-jialina01@baidu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJbzcCHAAoJEDhwtADrkYZT3YsP/2qE4HNY/htj3IP6vNJuSaqw
CLPRTz7zWmUBTE6FqSkvLsq3X2BMFFLeaIPA9EFcbyn2km6qPqBYgg9ElXXvPZBm
6hDeRIoC8FdRD0Apozd5MGC94/lE47PheDRV8V+4KrGLaaMXEPxMZ0wP4AfdS5pS
6Pt2xuF7nPu1+OWVxMk0fXadGjGLEuOQQmTh3B21J5RaynQ3gtd6h7XFC/LJyOGG
LC/6GyPc0h7KU83VnvrRjH/EOpu1wENgrsvWsS0sem8op35Z+i9jU5BfCp4qFkDy
gCHHUEyEeyexS+W+Tj87eBtK2gfrqQx9ovo8CIsWcUwpKbdD6AMK4FKGsDNMNHab
Kg5u/M+O8nHCB7DuursF+3mqEbZHb05cfKe6JEtiq49EuORMV5hp4Ap966noSwTw
UEU0NJNA1p8EdmXVudyyyYR7wpoSSmZpoenA+bJ3nthK8K0KcU4RUGk6ZEbxfJy+
7ENl+3R2IxmxzgXv/x0tz0uFisaVW1rltTXtMte+ElQsO0qy74iHdfR7JHsmLxj9
CO/ABMVoYsWq2OJv8pWLrdKpT4v3HQLJdHhknyu0ZcJGDyICqX29ULLEhPrNEZvW
rxVxAkiemlaqxlUjbrM46CDQQm+w03OCnk7aCYcV4oK+u5+o3mCag705gMPErapZ
6uOE3fAjiWw43sA31mek
=kPZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
From include/qapi/error.h:
* Pass an existing error to the caller with the message modified:
* error_propagate(errp, err);
* error_prepend(errp, "Could not frobnicate '%s': ", name);
Fei Li pointed out that doing error_propagate() first doesn't work
well when @errp is &error_fatal or &error_abort: the error_prepend()
is never reached.
Since I doubt fixing the documentation will stop people from getting
it wrong, introduce error_propagate_prepend(), in the hope that it
lures people away from using its constituents in the wrong order.
Update the instructions in error.h accordingly.
Convert existing error_prepend() next to error_propagate to
error_propagate_prepend(). If any of these get reached with
&error_fatal or &error_abort, the error messages improve. I didn't
check whether that's the case anywhere.
Cc: Fei Li <fli@suse.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-2-armbru@redhat.com>
We should not load PVM's state directly into SVM, because there maybe some
errors happen when SVM is receving data, which will break SVM.
We need to ensure receving all data before load the state into SVM. We use
an extra memory to cache these data (PVM's ram). The ram cache in secondary side
is initially the same as SVM/PVM's memory. And in the process of checkpoint,
we cache the dirty pages of PVM into this ram cache firstly, so this ram cache
always the same as PVM's memory at every checkpoint, then we flush this cached ram
to SVM after we receive all PVM's state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We need to know if migration is going into COLO state for
incoming side before start normal migration.
Instead by using the VMStateDescription to send colo_state
from source side to destination side, we use MIG_CMD_ENABLE_COLO
to indicate whether COLO is enabled or not.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Make sure master start block replication after slave's block
replication started.
Besides, we need to activate VM's blocks before goes into
COLO state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
For COLO FT, both the PVM and SVM run at the same time,
only sync the state while it needs.
So here, let SVM runs while not doing checkpoint, change
DEFAULT_MIGRATE_X_CHECKPOINT_DELAY to 200*100.
Besides, we forgot to release colo_checkpoint_semd and
colo_delay_timer, fix them here.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Spotted by ASAN while running:
$ tests/migration-test -p /x86_64/migration/postcopy/recovery
=================================================================
==18034==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 33864 byte(s) in 1 object(s) allocated from:
#0 0x7f3da7f31e50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7f3da644441d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5241d)
#2 0x55af9db15440 in qemu_fopen_channel_input /home/elmarco/src/qemu/migration/qemu-file-channel.c:183
#3 0x55af9db15413 in channel_get_output_return_path /home/elmarco/src/qemu/migration/qemu-file-channel.c:159
#4 0x55af9db0d4ac in qemu_file_get_return_path /home/elmarco/src/qemu/migration/qemu-file.c:78
#5 0x55af9dad5e4f in open_return_path_on_source /home/elmarco/src/qemu/migration/migration.c:2295
#6 0x55af9dadb3bf in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:3111
#7 0x55af9dae1bf3 in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:91
#8 0x55af9daddeca in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:108
#9 0x55af9e13d3db in qio_task_complete /home/elmarco/src/qemu/io/task.c:158
#10 0x55af9e13ca03 in qio_task_thread_result /home/elmarco/src/qemu/io/task.c:89
#11 0x7f3da643b1ca in g_idle_dispatch gmain.c:5535
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180925092245.29565-1-marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, it includes:
pages: amount of pages compressed and transferred to the target VM
busy: amount of count that no free thread to compress data
busy-rate: rate of thread busy
compressed-size: amount of bytes after compression
compression-rate: rate of compressed size
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180906070101.27280-3-xiaoguangrong@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().
Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Instead of putting the main thread to sleep state to wait for
free compression thread, we can directly post it out as normal
page that reduces the latency and uses CPUs more efficiently
A parameter, compress-wait-thread, is introduced, it can be
enabled if the user really wants the old behavior
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The destination qemu only poll the comp_channel->fd in
qemu_rdma_wait_comp_channel. But when source qemu disconnnect
the rdma connection, the destination qemu should be notified.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch implements bi-directional RDMA QIOChannel. Because different
threads may access RDMAQIOChannel currently, this patch use RCU to protect it.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently, the default maximum CPU throttle for migration is
99(CPU_THROTTLE_PCT_MAX). This is too big and can make a remarkable
performance effect for the guest. We see a lot of packets latency
exceed 500ms when the CPU_THROTTLE_PCT_MAX reached. This patch set
adds a new max-cpu-throttle parameter to limit the CPU throttle.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
migrate_fd_connect duplicate initialize expected_downtime and cleanup_bh.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Message-Id: <1532434585-14732-2-git-send-email-lidongchen@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Postcopy recovery won't work well with release-ram capability since
release-ram will drop the page buffer as long as the page is put into
the send buffer. So if there is a network failure happened, any page
buffers that have not yet reached the destination VM but have already
been sent from the source VM will be lost forever. Let's refuse the
client from resuming such a postcopy migration. Luckily release-ram was
designed to only be used when src and destination VMs are on the same
host, so it should be fine.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180723123305.24792-3-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We've been getting the warning:
migration_iteration_finish: Unknown ending state 2
on a cancel.
I think that's originally due to 39b9e17905c; although
I've only seen the warning, I think that in some cases
that we could find the VM stays paused after a cancel where
it should restart.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180719092257.12703-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
These two states will be missing when doing "query-migrate" on
destination VM. Add these states so that we can get the query results
as expected.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-5-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is the 2nd patch to unbreak postcopy recovery.
Let's unify the migration_incoming_process() call at a single place
rather than calling it in connection setup codes. This fixes a problem
that we will go into incoming migration procedure even if we are trying
to recovery from a paused postcopy migration.
Fixes: 36c2f8be2c ("migration: Delay start of migration main routines")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-5-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The whole postcopy recovery logic was accidentally broken. We need to
fix it in two steps.
This is the first step that we should do the recovery when needed. It
was bypassed before after commit 36c2f8be2c.
Introduce postcopy_try_recovery() helper for the postcopy recovery
logic. Call it both in migration_fd_process_incoming() and
migration_ioc_process_incoming().
Fixes: 36c2f8be2c ("migration: Delay start of migration main routines")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-4-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Move the call to migration_incoming_process() out of multifd code. It's
a bit strange that we can migration generic calls in multifd code.
Instead, let multifd_recv_new_channel() return a boolean showing whether
it's ready to continue the incoming migration.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-3-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The way we determine if we can start the incoming migration was
changed to use migration_has_all_channels() in:
commit 428d89084c
Author: Juan Quintela <quintela@redhat.com>
Date: Mon Jul 24 13:06:25 2017 +0200
migration: Create migration_has_all_channels
This method in turn calls multifd_recv_all_channels_created()
which is hardcoded to always return 'true' when multifd is
not in use. This is a latent bug...
...activated in a following commit where that return result
ends up acting as the flag to indicate whether it is possible
to start processing the migration:
commit 36c2f8be2c
Author: Juan Quintela <quintela@redhat.com>
Date: Wed Mar 7 08:40:52 2018 +0100
migration: Delay start of migration main routines
This means that if channel initialization fails with normal
migration, it'll never notice and attempt to start the
incoming migration regardless and crash on a NULL pointer.
This can be seen, for example, if a client connects to a server
requiring TLS, but has an invalid x509 certificate:
qemu-system-x86_64: The certificate hasn't got a known issuer
qemu-system-x86_64: migration/migration.c:386: process_incoming_migration_co: Assertion `mis->from_src_file' failed.
#0 0x00007fffebd24f2b in raise () at /lib64/libc.so.6
#1 0x00007fffebd0f561 in abort () at /lib64/libc.so.6
#2 0x00007fffebd0f431 in _nl_load_domain.cold.0 () at /lib64/libc.so.6
#3 0x00007fffebd1d692 in () at /lib64/libc.so.6
#4 0x0000555555ad027e in process_incoming_migration_co (opaque=<optimized out>) at migration/migration.c:386
#5 0x0000555555c45e8b in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>) at util/coroutine-ucontext.c:116
#6 0x00007fffebd3a6a0 in __start_context () at /lib64/libc.so.6
#7 0x0000000000000000 in ()
To handle the non-multifd case, we check whether mis->from_src_file
is non-NULL. With this in place, the migration server drops the
rejected client and stays around waiting for another, hopefully
valid, client to arrive.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180619163552.18206-1-berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The function still don't use multifd, but we have simplified
ram_save_page, xbzrle and RDMA stuff is gone. We have added a new
counter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Add last_page parameter
Add commets for done and address
Remove multifd field, it is the same than normal pages
Merge next patch, now we send multiple pages at a time
Remove counter for multifd pages, it is identical to normal pages
Use iovec's instead of creating the equivalent.
Clear memory used by pages (dave)
Use g_new0(danp)
define MULTIFD_CONTINUE
now pages member is a pointer
Fix off-by-one in number of pages in one packet
Remove RAM_SAVE_FLAG_MULTIFD_PAGE
s/multifd_pages_t/MultiFDPages_t/
add comment explaining what it means
This will include how many bytes they are sent through multifd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Right now we use the "position" inside the QEMUFile, but things like
RDMA already do weird things to be able to maintain that counter
right, and multifd will have some similar problems.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We used to include in this calculation the setup time, but that can be
quite big in rdma or multifd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
expected_downtime value is not accurate with dirty_pages_rate * page_size,
using ram_bytes_remaining() would yeild it resonable.
consider to read the remaining ram just after having updated the dirty
pages count later migration_bitmap_sync_range() in migration_bitmap_sync()
and reuse the `remaining` field in ram_counters to hold ram_bytes_remaining()
for calculating expected_downtime.
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20180612085009.17594-2-bala24@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Rate limiting sleeps the migration thread for a while when it runs
out of bandwidth; but sometimes we want to wake up to get on with
something more urgent (like a postcopy request). Here we use
a semaphore with a timedwait instead of a simple sleep; Incrementing
the sempahore will wake it up sooner. Anything that consumes
these urgent events must decrement the sempahore.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180613102642.23995-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Limit the background transfer bandwidth during the postcopy
phase to the value set on this new parameter. The default, 0,
corresponds to the existing behaviour which is unlimited bandwidth.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180613102642.23995-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Activating the block devices causes the locks to be taken on
the backing file. If we're running with -S and the destination libvirt
hasn't started the destination with 'cont', it's expecting the locks are
still untaken.
Don't activate the block devices if we're not going to autostart the VM;
'cont' already will do that anyway. This change is tied to the new
migration capability 'late-block-activate' that defaults to off, keeping
the old behaviour by default.
bz: https://bugzilla.redhat.com/show_bug.cgi?id=1560854
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
QEMU 3.0 enables strict check for compression & decompression to
make the migration more robust, that depends on the source to fix
the internal design which triggers the unexpected error conditions
To make it work for migrating old version QEMU to 2.13 QEMU, we
introduce this parameter to disable the error check on the
destination which is the default behavior of the machine type
which is older than 2.13, alternately, the strict check can be
enabled explicitly as followings:
-M pc-q35-2.11 -global migration.decompress-error-check=true
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It pauses an ongoing migration. Currently it only supports postcopy.
Note that this command will work on either side of the migration.
Basically when we trigger this on one side, it'll interrupt the other
side as well since the other side will get notified on the disconnect
event.
However, it's still possible that the other side is not notified, for
example, when the network is totally broken, or due to some firewall
configuration changes. In that case, we will also need to run the same
command on the other side so both sides will go into the paused state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-24-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
Let's introduce a lock for that QEMUFile since we are going to operate
on it in multiple threads.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-23-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The first allow-oob=true command. It's used on destination side when
the postcopy migration is paused and ready for a recovery. After
execution, a new migration channel will be established for postcopy to
continue.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-21-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
Though we may not need it, now we init both the src/dst migration
objects in migration_object_init() so that even incoming migration
object would be thread safe (it was not).
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-20-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Finish the last step to do the final handshake for the recovery.
First source sends one MIG_CMD_RESUME to dst, telling that source is
ready to resume.
Then, dest replies with MIG_RP_MSG_RESUME_ACK to source, telling that
dest is ready to resume (after switch to postcopy-active state).
When source received the RESUME_ACK, it switches its state to
postcopy-active, and finally the recovery is completed.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-19-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch implements the first part of core RAM resume logic for
postcopy. ram_resume_prepare() is provided for the work.
When the migration is interrupted by network failure, the dirty bitmap
on the source side will be meaningless, because even the dirty bit is
cleared, it is still possible that the sent page was lost along the way
to destination. Here instead of continue the migration with the old
dirty bitmap on source, we ask the destination side to send back its
received bitmap, then invert it to be our initial dirty bitmap.
The source side send thread will issue the MIG_CMD_RECV_BITMAP requests,
once per ramblock, to ask for the received bitmap. On destination side,
MIG_RP_MSG_RECV_BITMAP will be issued, along with the requested bitmap.
Data will be received on the return-path thread of source, and the main
migration thread will be notified when all the ramblock bitmaps are
synchronized.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-17-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is hook function to be called when a postcopy migration wants to
resume from a failure. For each module, it should provide its own
recovery logic before we switch to the postcopy-active state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-16-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Creating new message to reply for MIG_CMD_POSTCOPY_RESUME. One uint32_t
is used as payload to let the source know whether destination is ready
to continue the migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-15-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introducing new return path message MIG_RP_MSG_RECV_BITMAP to send
received bitmap of ramblock back to source.
This is the reply message of MIG_CMD_RECV_BITMAP, it contains not only
the header (including the ramblock name), and it was appended with the
whole ramblock received bitmap on the destination side.
When the source receives such a reply message (MIG_RP_MSG_RECV_BITMAP),
it parses it, convert it to the dirty bitmap by inverting the bits.
One thing to mention is that, when we send the recv bitmap, we are doing
these things in extra:
- converting the bitmap to little endian, to support when hosts are
using different endianess on src/dst.
- do proper alignment for 8 bytes, to support when hosts are using
different word size (32/64 bits) on src/dst.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-13-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On the destination side, we cannot wake up all the threads when we got
reconnected. The first thing to do is to wake up the main load thread,
so that we can continue to receive valid messages from source again and
reply when needed.
At this point, we switch the destination VM state from postcopy-paused
back to postcopy-recover.
Now we are finally ready to do the resume logic.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-11-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introducing new migration state "postcopy-recover". If a migration
procedure is paused and the connection is rebuilt afterward
successfully, we'll switch the source VM state from "postcopy-paused" to
the new state "postcopy-recover", then we'll do the resume logic in the
migration thread (along with the return path thread).
This patch only do the state switch on source side. Another following up
patch will handle the state switching on destination side using the same
status bit.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-10-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.11/2.13/
This patch detects the "resume" flag of migration command, rebuild the
channels only if the flag is set.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-9-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It will be used when we want to resume one paused migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-8-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
Allows the fault thread to stop handling page faults temporarily. When
network failure happened (and if we expect a recovery afterwards), we
should not allow the fault thread to continue sending things to source,
instead, it should halt for a while until the connection is rebuilt.
When the dest main thread noticed the failure, it kicks the fault thread
to switch to pause state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-7-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let the thread pause for network issues.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-6-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When there is IO error on the incoming channel (e.g., network down),
instead of bailing out immediately, we allow the dst vm to switch to the
new POSTCOPY_PAUSE state. Currently it is still simple - it waits the
new semaphore, until someone poke it for another attempt.
One note is that here on ram loading thread we cannot detect the
POSTCOPY_ACTIVE state, but we need to detect the more specific
POSTCOPY_INCOMING_RUNNING state, to make sure we have already loaded all
the device states.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-5-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now when network down for postcopy, the source side will not fail the
migration. Instead we convert the status into this new paused state, and
we will try to wait for a rescue in the future.
If a recovery is detected, migration_thread() will reset its local
variables to prepare for that.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-4-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introducing a new state "postcopy-paused", which can be used when the
postcopy migration is paused. It is targeted for postcopy network
failure recovery.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-3-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need to make sure that we have started all the multifd threads.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.
The query-migrate command will show following sample result:
{"return":
"postcopy-vcpu-blocktime": [115, 100],
"status": "completed",
"postcopy-blocktime": 100
}}
postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.
This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-7-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Right now it could be used on destination side to
enable vCPU blocktime calculation for postcopy live migration.
vCPU blocktime - it's time since vCPU thread was put into
interruptible sleep, till memory page was copied and thread awake.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-2-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This reverts commit 0746a92612.
Discussion with kwolf suggests this is actually an API change that
we need to gate on a capability. Push to 2.13.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Activating the block devices causes the locks to be taken on
the backing file. If we're running with -S and the destination libvirt
hasn't started the destination with 'cont', it's expecting the locks are
still untaken.
Don't activate the block devices if we're not going to autostart the VM;
'cont' already will do that anyway.
bz: https://bugzilla.redhat.com/show_bug.cgi?id=1560854
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180328170207.49512-1-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix the case where when a migration with a bad protocol is tried,
we leave the block migration capability set.
(This is a cut down version of my 'migration: Fix block failure cases'
where it's other case was fixed by Peter's dd0ee30cae )
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180316202114.32345-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Allow other userfaultfd's to be registered into the fault thread
so that handlers for shared memory can get responses.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Postcopy migration of dirty bitmaps. Only named dirty bitmaps are migrated.
If destination qemu is already containing a dirty bitmap with the same name
as a migrated bitmap (for the same node), then, if their granularities are
the same the migration will be done, otherwise the error will be generated.
If destination qemu doesn't contain such bitmap it will be created.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-12-vsementsov@virtuozzo.com
[Changed '+' to '*' as per list discussion. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Allow migrate-start-postcopy for any postcopy type
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-11-vsementsov@virtuozzo.com
There would be savevm states (dirty-bitmap) which can migrate only in
postcopy stage. The corresponding pending is introduced here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-6-vsementsov@virtuozzo.com
When setting migration capabilities via QMP/HMP, we'll apply them even
if the capability check failed. Fix it.
Fixes: 4a84214ebe ("migration: provide migrate_caps_check()", 2017-07-18)
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180305094938.31374-1-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Spotted thanks to ASAN:
QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 tests/migration-test -p /x86_64/migration/bad_dest
==30302==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7f60efba1a38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7f60eef3cf75 in g_malloc0 ../glib/gmem.c:124
#2 0x55ca9094702c in error_copy /home/elmarco/src/qemu/util/error.c:203
#3 0x55ca9037a30f in migrate_set_error /home/elmarco/src/qemu/migration/migration.c:1139
#4 0x55ca9037a462 in migrate_fd_error /home/elmarco/src/qemu/migration/migration.c:1150
#5 0x55ca9038162b in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:2411
#6 0x55ca90386e41 in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:81
#7 0x55ca9038335e in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:85
#8 0x55ca9083dd3a in qio_task_complete /home/elmarco/src/qemu/io/task.c:142
#9 0x55ca9083d6cc in gio_task_thread_result /home/elmarco/src/qemu/io/task.c:88
#10 0x7f60eef37317 in g_idle_dispatch ../glib/gmain.c:5552
#11 0x7f60eef3490b in g_main_dispatch ../glib/gmain.c:3182
#12 0x7f60eef357ac in g_main_context_dispatch ../glib/gmain.c:3847
#13 0x55ca90927231 in glib_pollfds_poll /home/elmarco/src/qemu/util/main-loop.c:214
#14 0x55ca90927420 in os_host_main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:261
#15 0x55ca909275fa in main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:515
#16 0x55ca8fc1c2a4 in main_loop /home/elmarco/src/qemu/vl.c:1942
#17 0x55ca8fc2eb3a in main /home/elmarco/src/qemu/vl.c:4724
#18 0x7f60e4082009 in __libc_start_main (/lib64/libc.so.6+0x21009)
Indirect leak of 45 byte(s) in 1 object(s) allocated from:
#0 0x7f60efba1850 in malloc (/lib64/libasan.so.4+0xde850)
#1 0x7f60eef3cf0c in g_malloc ../glib/gmem.c:94
#2 0x7f60eef3d1cf in g_malloc_n ../glib/gmem.c:331
#3 0x7f60eef596eb in g_strdup ../glib/gstrfuncs.c:363
#4 0x55ca90947085 in error_copy /home/elmarco/src/qemu/util/error.c:204
#5 0x55ca9037a30f in migrate_set_error /home/elmarco/src/qemu/migration/migration.c:1139
#6 0x55ca9037a462 in migrate_fd_error /home/elmarco/src/qemu/migration/migration.c:1150
#7 0x55ca9038162b in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:2411
#8 0x55ca90386e41 in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:81
#9 0x55ca9038335e in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:85
#10 0x55ca9083dd3a in qio_task_complete /home/elmarco/src/qemu/io/task.c:142
#11 0x55ca9083d6cc in gio_task_thread_result /home/elmarco/src/qemu/io/task.c:88
#12 0x7f60eef37317 in g_idle_dispatch ../glib/gmain.c:5552
#13 0x7f60eef3490b in g_main_dispatch ../glib/gmain.c:3182
#14 0x7f60eef357ac in g_main_context_dispatch ../glib/gmain.c:3847
#15 0x55ca90927231 in glib_pollfds_poll /home/elmarco/src/qemu/util/main-loop.c:214
#16 0x55ca90927420 in os_host_main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:261
#17 0x55ca909275fa in main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:515
#18 0x55ca8fc1c2a4 in main_loop /home/elmarco/src/qemu/vl.c:1942
#19 0x55ca8fc2eb3a in main /home/elmarco/src/qemu/vl.c:4724
#20 0x7f60e4082009 in __libc_start_main (/lib64/libc.so.6+0x21009)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180306170959.3921-1-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Let the callers take the object, then pass it to migrate_init().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-12-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We will not allow failures to happen when sending data from destination
to source via the return path. However it is possible that there can be
errors along the way. This patch allows the migrate_send_rp_message()
to return error when it happens, and further extended it to
migrate_send_rp_req_pages().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-9-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the postcopy down due to some reason, we can always see this on dst:
qemu-system-x86_64: RP: Received invalid message 0x0000 length 0x0000
However in most cases that's not the real issue. The problem is that
qemu_get_be16() has no way to show whether the returned data is valid or
not, and we are _always_ assuming it is valid. That's possibly not wise.
The best approach to solve this would be: refactoring QEMUFile interface
to allow the APIs to return error if there is. However it needs quite a
bit of work and testing. For now, let's explicitly check the validity
first before using the data in all places for qemu_get_*().
This patch tries to fix most of the cases I can see. Only if we are with
this, can we make sure we are processing the valid data, and also can we
make sure we can capture the channel down events correctly.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need
qbool.h, qnull.h, qnum.h and qstring.h to compile. We include qnull.h
and qnum.h in the headers, but not qbool.h and qstring.h. Works,
because we include those wherever the macros get used.
Open-coding these helpers is of dubious value. Turn them into
functions and drop the includes from the headers.
This cleanup makes the number of objects depending on qapi/qmp/qnum.h
from 4551 (out of 4743) to 46 in my "build everything" tree. For
qapi/qmp/qnull.h, the number drops from 4552 to 21.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-10-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
In e91d895 I added the new pause-before-switchover mechanism
to allow migration completion to be delayed; this changes the
last state prior to completion to MIGRATE_STATUS_DEVICE rather
than MIGRATE_STATUS_ACTIVE.
Fix the failure path in migration_completion to recover the block
devices if it fails in MIGRATE_STATUS_DEVICE, not just the
MIGRATE_STATUS_ACTIVE that it previously had.
This corresponds to rh bz:
https://bugzilla.redhat.com/show_bug.cgi?id=1538494
whose symptom is an occasional source crash on a failed migration.
Fixes: e91d8951d5
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: b15df1ae50 ("migration: cleanup stats update into function")
The threshold size is changed to be recorded in s->threshold_size.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Allow whatever is performing the connection to pass migrate_fd_connect
an error to indicate there was a problem during connection, an allow
us to clean up.
The caller must free the error.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This reverts commits
ca6011c migration: add postcopy total blocktime into query-migrate
5f32dc8 migration: add blocktime calculation into migration-test
2f7dae9 migration: postcopy_blocktime documentation
3be98be migration: calculate vCPU blocktime on dst side
01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState
31bf06a migration: introduce postcopy-blocktime capability
as they don't build on ppc32 due to trying to do atomic accesses
on types that are larger than the host pointer type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is already called in migrate_fd_cleanup.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Keep the one in migrate_fd_cleanup() would be enough. Removing the other
two.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch only moved the last part of migration_thread() into a new
function migration_iteration_finish() to make it much shorter. With
previous works to remove some local variables, now it's fairly easy to
do that.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The major work for migration iterations are to move RAM/block/... data
via qemu_savevm_state_iterate(). Generalize those part into a single
function.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have quite a few lines in migration_thread() that calculates some
statistics for the migration interations. Isolate it into a single
function to improve readability.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It converts the old if clauses into switch, explicitly mentions the
possible migration states. The old nested "if"s are not clear on what
we do on different states.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Generalize the calculation part when migration complete into a
function to simplify migration_thread().
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce MigrationState.downtime_start to replace the local variable
"start_time" in migration_thread to avoid passing things around.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Firstly, it was passed around. Let's just move it into MigrationState
just like many other variables as state of migration, renaming it to
vm_was_running.
One thing to mention is that for postcopy, we actually don't need this
knowledge at all since postcopy can't resume a VM even if it fails (we
can see that from the old code too: when we try to resume we also check
against "entered_postcopy" variable). So further we do this:
- in postcopy_start(), we don't update vm_old_running since useless
- in migration_thread(), we don't need to check entered_postcopy when
resume, since it's only used for precopy.
Comment this out too for that variable definition.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was used either to:
1. store initial timestamp of migration start, and
2. store total time used by last migration
Let's provide two parameters for each of them. Mix use of the two is
slightly misleading.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Moving existing callers all into migrate_fd_cleanup(). It simplifies
migration_thread() a bit.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When reaching here if we are still "active" it means we must be in colo
state. After a quick discussion offlist, we decided to use the safer
error_report().
Finally I want to use "switch" here rather than lots of complicated if
clauses.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
current_migration has .instance_finalize callback, but it is not
called, because nobody unrefs current_migration. Fix that.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.
The query-migrate command will show following sample result:
{"return":
"postcopy-vcpu-blocktime": [115, 100],
"status": "completed",
"postcopy-blocktime": 100
}}
postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.
This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Right now it could be used on destination side to
enable vCPU blocktime calculation for postcopy live migration.
vCPU blocktime - it's time since vCPU thread was put into
interruptible sleep, till memory page was copied and thread awake.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once there, do one thing for line
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We use int for everything (int64_t), and then we check that value is
between 0 and 255. Change it to the valid types.
This change only happens for HMP. QMP always use bytes and similar.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Right now it is a variable in MigrationState instead of a
MigrationParameter. The change allows to set it as the rest of the
Migration parameters, from the command line, with
query_migration_paramters, set_migrate_parameters, etc.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
After the previous commits, we make sure that the value passed is
right, or we just drop an error. So now we return if there is one
error or we have setup correctly the value passed.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Improve error messasge
Return 0 always for success
We now report errors also when we finish migration, not only on info
migrate. We plan to use this error from several places, and we want
the first error to happen to win, so we add an mutex to order it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add pause-before-switchover support for postcopy.
After starting postcopy it will transition
active->pre-switchover->postcopy_active
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If a migration_cancel is issued during the new paused state,
kick the pause_sem to get to unpause so it can cancel.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
A new qmp command allows the caller to continue from a given
paused state.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Wait for a semaphore before completing the migration,
if the previously added capability was enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add two statuses for use when the 'pause-before-switchover'
capability is enabled.
'pre-switchover' is the state that we wait in for management
to allow us to continue.
'device' is the state we enter while serialising the devices
after management gives us the OK.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When 'pause-before-switchover' is enabled, the outgoing migration
will pause before invalidating the block devices and serializing
the device state.
At this point the management layer gets the chance to clean up any
device jobs or other device users before the migration completes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
That tiny refactoring is necessary to be able to set
UFFD_FEATURE_THREAD_ID while requesting features, and then
to create downtime context in case when kernel supports it.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Split common postcopy staff from ram postcopy staff.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need that on later patches.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Creation of the threads, nothing inside yet.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Use pointers instead of long array names
Move to use semaphores instead of conditions as paolo suggestion
Put all the state inside one struct.
Use a counter for the number of threads created. Needed during cancellation.
Add error return to thread creation
Add id field
Rename functions to multifd_save/load_setup/cleanup
Change recv parameters to a pointer to struct
Change back to a struct
Use Error * for _cleanup
Indicates how many pages we are going to send in each batch to a multifd
thread.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Be consistent with defaults and documentation
Use new DEFINE_PROP_*
Rename x-multifd-group to x-multifd-page-count
Indicates the number of channels that we will create. By default we
create 2 channels.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Catch inconsistent defaults (eric).
Improve comment stating that number of threads is the same than number
of sockets
Use new DEFIN_PROP_*
Rename x-multifd-threads to x-multifd-threads
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
--
Use new DEFINE_PROP
This function allows us to decide when to close the listener socket.
For now, we only need one connection.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
We pass the ioc instead of the fd. This will allow us to have more
than one channel open. We also make sure that we set the
from_src_file sooner, so we don't need to pass it as a parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
--
Do not assing mis->from_src_file (peterxu)
Strings are more readable for debugging.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1504081950-2528-5-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up merge with 977c73
migration_incoming_state_destroy doesn't really destroy, it cleans up.
After a loadvm it's called, but the loadvm command can be run twice,
and so destroying an init-once mutex breaks on the second loadvm.
Reported-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170825141940.20740-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Spotted thanks to valgrind and tests/device-introspect-test:
==11711== 1 bytes in 1 blocks are definitely lost in loss record 6 of 14,537
==11711== at 0x4C2EB6B: malloc (vg_replace_malloc.c:299)
==11711== by 0x1E0CDBD8: g_malloc (gmem.c:94)
==11711== by 0x1E0E696E: g_strdup (gstrfuncs.c:363)
==11711== by 0x695693: migration_instance_init (migration.c:2226)
==11711== by 0x717C4B: object_init_with_type (object.c:344)
==11711== by 0x717E80: object_initialize_with_type (object.c:375)
==11711== by 0x7182EB: object_new_with_type (object.c:483)
==11711== by 0x718328: object_new (object.c:493)
==11711== by 0x4B8A29: qmp_device_list_properties (qmp.c:542)
==11711== by 0x4A9561: qmp_marshal_device_list_properties (qmp-marshal.c:1425)
==11711== by 0x819D4A: do_qmp_dispatch (qmp-dispatch.c:104)
==11711== by 0x819E82: qmp_dispatch (qmp-dispatch.c:131)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170801160419.14180-1-marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migrate-set-parameters sets migration parameters according to is
arguments like this:
* Present means "set the parameter to this value"
* Absent means "leave the parameter unchanged"
* Except for parameters tls_creds and tls_hostname, "" means "reset
the parameter to its default value
The first two are perfectly normal: presence of the parameter makes
the command do something.
The third one overloads the parameter with a second meaning. The
overloading is *implicit*, i.e. it's not visible in the types. Works
here, because "" is neither a valid TLS credentials ID, nor a valid
host name.
Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "reset to default" is not general, as
suitable invalid values need not exist. I also find it ugly.
To clean this up, we could add a separate flag argument to ask for
"reset to default", or add a distinct value to @tls_creds and
@tls_hostname. This commit implements the latter: add JSON null to
the values of @tls_creds and @tls_hostname, deprecate "".
Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_migrate_set_parameters() rewrite null
to "" before anything else can see the null. The proper way to do it
would be rewriting "" to null, but that requires fixing up code to
work with null. Add TODO comments for that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit de63ab6 "migrate: Share common MigrationParameters struct"
reused MigrationParameters for the arguments of
migrate-set-parameters, with the following rationale:
It is rather verbose, and slightly error-prone, to repeat
the same set of parameters for input (migrate-set-parameters)
as for output (query-migrate-parameters), where the only
difference is whether the members are optional. We can just
document that the optional members will always be present
on output, and then share a common struct between both
commands. The next patch can then reduce the amount of
code needed on input.
I need to unshare them to correct a design flaw in a stupid, but
minimally invasive way, in the next commit. We can restore the
sharing when we redo that patch in a less stupid way. Add a suitable
TODO comment.
Note that I revert only the sharing part of commit de63ab6, not the
part that made the members of query-migrate-parameters' result
optional. The schema (and thus introspection) remains inaccurate for
query-migrate-parameters. If we decide not to restore the sharing, we
should revert that part, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qmp_query_migrate_parameters() and qmp_migrate_set_parameters()
effectively duplicate QAPI_CLONE() inline. Add suitable TODO
comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Optional MigrationParameters members tls_creds and tls_hostname can't
actually be absent outside qmp_migrate_set_parameters() since commit
4af245d (v2.9.0).
Note that commit 4af245d reverted the part of commit de63ab6 (v2.8.0)
that made tls_creds and tls_hostname absent instead of "" in the value
of query-migrate-parameters, even though commit de63ab6 called that a
mistake. What a mess.
Drop the redundant tests for presence, and update documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Checks validity for all the capabilities that we enabled with command
line.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1500349150-13240-11-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Abstracted from migrate_set_block_enabled() to allocate
MigrationCapabilityStatusList properly.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-10-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Abstract helper function to check migration capabilities (from the old
qmp_migrate_set_capabilities). Prepare to be used somewhere else.
There is side effect on the change: when applying the capabilities, we
were skipping the invalid ones, but still applying the valid ones (if
they are provided in the same QMP request). After this refactoring,
we'll ignore all the capabilities if we detected invalid setup along the
way. However, I don't think it is a problem since general users should
not provide anything invalid after all.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-9-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since commit a15215f3 ("build: remove --enable-colo/--disable-colo"),
colo is always supported. We don't need any colo_supported() now since
it is always true. Removing any extra code that depends on it.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen<zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-8-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Adding validity check for the migration parameters passed in via global
properties.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1500349150-13240-7-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Abstracted from qmp_migrate_set_parameters().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-6-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Helper to check the parameters. Abstracted from
qmp_migrate_set_parameters().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-5-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Do the same thing to migration capabilities, just like what we did in
previous patch for migration parameters.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-4-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Export migration parameters to qdev properties. Then we can use, for
example:
-global migration.x-cpu-throttle-initial=xxx
To specify migration parameters during init.
Prefix "x-" is appended for each parameter exported to show that this is
not a stable interface, and only for debugging/testing purpose.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-3-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Closing the file before exit on a failure allows
the source to cleanup better, especially with RDMA.
Partial fix for https://bugs.launchpad.net/qemu/+bug/1545052
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170717110936.23314-3-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once there, be consistent and use
compress_thread_{save,load}_{setup,cleanup}.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-6-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Once there, I rename ram_migration_cleanup() to ram_save_cleanup().
Notice that this is the first pass, and I only passed XBZRLE to the
new scheme. Moved decoded_buf to inside XBZRLE struct.
As a bonus, I don't have to export xbzrle functions from ram.c.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
loaded_data pointer was needed because called can change it (dave)
spell loaded correctly in comment (dave)
Message-Id: <20170628095228.4661-5-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are going to use it now for more than save live regions.
Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-2-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
[Peter collected Eduardo's patch comment and formatted into patch]
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-5-git-send-email-peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MigrateState object is not ready at that time, so we'll get an
assertion. Use qemu_global_option() instead.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fixes: 3df663e ("migration: move only_migratable to MigrationState")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-2-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When this capability is enabled, QEMU will use the return path even for
precopy migration. This is helpful at least in one case when destination
failed to load the image while source quited without confirmation. With
return path, source will wait for the last response from destination,
and if destination fails, it'll fail the migration on source, then the
guest can be run again on the source (rather than assuming to be good,
then the guest will be lost after source quits).
It needs to be enabled explicitly on source, otherwise disabled.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498472935-14461-1-git-send-email-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It'll be strange that the migration object inherits TYPE_DEVICE. Add
some explanations to it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498634144-26508-1-git-send-email-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now we have some globals that can be configured for migration. Dump them
in HMP info migration for better debugging.
(we can also use this to monitor whether COMPAT fields are applied
correctly on compatible machines)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-11-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
These two parameters:
- MachineState::enforce_config_section
- MigrationState::send_configuration
are playing similar role here. This patch merges the first one into
second, then we'll have a single place to reference whether we need to
send the configuration section.
I didn't remove the MachineState.enforce_config_section field since when
applying that machine property (in machine_set_property()) we haven't
yet initialized global properties and migration object. Then, it's
still not easy to pass that boolean to MigrationState at such an early
time.
A natural benefit for current patch is that now we kept the meaning of
"enforce-config-section" since it'll still have the highest
priority (that's what "enforce" mean I guess).
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-10-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Move it into MigrationState, revert its meaning and renaming it to
send_section_footer, with a property bound to it. Same trick is played
like previous patches.
Removing savevm_skip_section_footers().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-9-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was in SaveState but now moved to MigrationState altogether, reverted
its meaning, then renamed to "send_configuration". Again, using
HW_COMPAT_2_3 for old PC/SPAPR machines, and accel_register_prop() for
xen_init().
Removing savevm_skip_configuration().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-8-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
One less global variable, and it does only matter with migration.
We keep the old "--only-migratable" option, but also now we support:
-global migration.only-migratable=true
Currently still keep the old interface.
Hmm, now vl.c has no way to access migrate_get_current(). Export a
function for it to setup only_migratable.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-7-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Put it into MigrationState then we can use the properties to specify
whether to enable storing global state.
Removing global_state_set_optional() since now we can use HW_COMPAT_2_3
for x86/power, and AccelClass.global_props for Xen.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-6-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let the old man "MigrationState" join the object family. Direct benefit
is that we can start to use all the property features derived from
current QDev, like: HW_COMPAT_* bits, command line setup for migration
parameters (so will never need to set them up each time using HMP/QMP,
this is really, really attractive for test writters), etc.
I see no reason to disallow this happen yet. So let's start from this
one, to see whether it would be anything good.
Now we init the MigrationState struct statically in main() to make sure
it's initialized after global properties are applied, since we'll use
them during creation of the object.
No functional change at all.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-5-git-send-email-peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Previously, dst side will immediately try to lock the write byte upon
receiving QEMU_VM_EOF, but at src side, bdrv_inactivate_all() is only
done after sending it. If the src host is under load, dst may fail to
acquire the lock due to racing with the src unlocking it.
Fix this by hoisting the bdrv_inactivate_all() operation before
QEMU_VM_EOF.
N.B. A further improvement could possibly be done to cleanly handover
locks between src and dst, so that there is no window where a third QEMU
could steal the locks and prevent src and dst from running.
N.B. This commit includes a minor improvement to the error handling
by using qemu_file_set_error().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170616160658.32290-1-famz@redhat.com
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[PMM: noted qemu_file_set_error() use in commit as suggested by Daniel]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
0425dc9 is actually v1 of that patch, but it was accidentally
merged (while there was a v2). That will cause problem when we try to
migrate to some old QEMUs when return path is not really there. Let's
fix it, then squashing this patch with 0425dc9 will be exactly patch
content of v2.
Fixes: 0425dc9 ("migration: isolate return path on src")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Nothing uses it outside of migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
It don't belong anywhere else, just the global state where everybody
can stick other things.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
So, move them there. Notice that we export functions that send
commands, not the command themselves.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Merge them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Once there, create populate_disk_info.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
--
- create populate_disk_info instead of "abusing" populate_ram_info
