There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122455.19417-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some platforms used the wrong definition of stack_t where the flags and
size fields were swapped or where the flags field had type ulong instead
of int.
Due to the presence of padding space in the structure and the prevalence
of little-endian machines this problem went unnoticed for a long time.
The type definitions have been cross-checked with the ones defined in
the Linux kernel v5.9, plus some older versions for a few architecture
that have been removed and Xilinx's kernel fork for NiosII [1].
The bsd-user headers remain unchanged as I don't know if they are wrong
or not.
[1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements strace argument printing functionality for following syscalls:
* mlock, munlock, mlockall, munlockall - lock and unlock memory
int mlock(const void *addr, size_t len)
int munlock(const void *addr, size_t len)
int mlockall(int flags)
int munlockall(void)
man page: https://man7.org/linux/man-pages/man2/mlock.2.html
Implementation notes:
Syscall mlockall() takes an argument that is composed of predefined values
which represent flags that determine the type of locking operation that is
to be performed. For that reason, a printing function "print_mlockall" was
stated in file "strace.list". This printing function uses an already existing
function "print_flags()" to print the "flags" argument. These flags are stated
inside an array "mlockall_flags" that contains values of type "struct flags".
These values are instantiated using an existing macro "FLAG_TARGET()" that
crates aproppriate target flag values based on those defined in files
'/target_syscall.h'. These target flag values were changed from
"TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set
and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT"
was added in this patch. This value was also added in "syscall.c" in function
"target_to_host_mlockall_arg()". Because this flag value was added in kernel
version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and
in "strace.c") as to support older kernel versions.
The other syscalls have only primitive argument types, so the
rest of the implementation was handled by stating an appropriate
printing format in file "strace.list". Syscall mlock2() is not implemented in
"syscall.c" and thus it's argument printing is not implemented in this patch.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The most interesting or most complicated part here is the syscall_nr.h
generators. In order to keep the generation logic all in meson.build,
I am adding to config_target the name of the .tbl file, and making the
generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl.
For architectures where the input file is not named syscall_nr.tbl,
syscall_nr.h has to be a source file; it's just a forwarder for x86
(i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run scripts/update-syscalltbl.sh with linux commit 0bf999f9c5e7
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-20-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall_n32.tbl, syscall_n64.tbl and syscallhdr.sh from
linux/arch/parisc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Move the offsets (6000 for n32 and 5000 for n64) from the file to
the Makefile.objs to be passed to syscallhdr.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-18-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Implement MIPS specific prctl() PR_SET_FP_MODE and PR_GET_FP_MODE emulation.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add MIPS-specific prctl() options TARGET_PR_SET_FP_MODE and
TARGET_PR_SET_FP_MODE. These values are essentially copied from
linux kernel header include/uapi/linux/prctl.h.
This is done in a way consistent with a similar case of
aarch64-specific prctl() options TARGET_PR_SVE_SET_VL and
TARGET_PR_SVE_GET_VL.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Synchronize content of linux-user/mips/syscall_nr.h and
linux-user/mips64/syscall_nr.h with Linux kernel 4.18 headers.
This adds 9 new syscall numbers, the last being NR_io_pgetevents.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
add a per target target_fcntl.h and include the generic one from them
No code change.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
No code change, only move code from main.c to
mips/cpu_loop.c.
Include mips/cpu_loop.c in mips64/cpu_loop.c
to avoid to duplicate code.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-8-laurent@vivier.eu>
Create a cpu_loop-common.h for future use by
these new files and use it in the existing
main.c
Introduce target_cpu_copy_regs():
declare the function in cpu_loop-common.h
and an empty function for each target,
to move all the cpu_loop prologues to this function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
Instead of calling setup_frame() conditionally to a list of known targets,
define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function
and call it only if the macro is defined.
Move declarations of setup_frame() and setup_rt_frame() to
linux-user/signal-common.h
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
No code change, only move code from signal.c to
mips/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
mips64/signal.c includes mips/signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-19-laurent@vivier.eu>
Create a signal-common.h for future use by these new files
and use it in the existing signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
So here we need to detect the version of binaries and set
cpu_model for it.
Signed-off-by: YunQiang Su <syq@debian.org>
[lv: original patch modified to move code into cpu_get_model()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180220173307.25125-5-laurent@vivier.eu>
Instead of a sequence of "#if ... #endif" move the
selection to a function in linux-user/*/target_elf.h
We can't add them in linux-user/*/target_cpu.h
because we will need to include "elf.h" to
use ELF flags with eflags, and including
"elf.h" in "target_cpu.h" introduces some
conflicts in elfload.c
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
linux-user/mips64/termbits.h and linux-user/mips/termbits.h
originate from the same files in Linux kernel. There is no plan
to split original headers in Linux kernel into Mips32 and Mips64
versions any time soon. Therefore, it is better not to have
separate Mips32 and Mips64 variants in Qemu.
This patch makes these two files effectively the same, allowing the
mainenance by changing only a single file. (This is already done in
the same fashion for some other headers in same directories.)
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
EDQUOT is defined for Mips platform in Linux kernel in such a way
that it has different value than on most other platforms. However,
correspondent TARGET_EDQUOT for Mips is missing in Qemu code. Moreover,
TARGET_EDQUOT is missing from the table for conversion of error codes
from host to target. This patch fixes these problems.
Without this patch, syscalls add_key(), keyctl(), link(), mkdir(), mknod(),
open(), rename(), request_key(), setxattr(), symlink(), and write() will not
be able to return the right error code in some scenarios on Mips platform.
(Some of these syscalls are not yet supported in Qemu, but once they are
supported, they will need correct EDQUOT handling.)
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
The shmat() handling needs to do target-specific handling
of the attach address for shmat():
* if the SHM_RND flag is passed, the address is rounded
down to a SHMLBA boundary
* if SHM_RND is not passed, then the call is failed EINVAL
if the address is not a multiple of SHMLBA
Since SHMLBA is target-specific, we need to do this
checking and rounding in QEMU and can't leave it up to the
host syscall.
Allow targets to define TARGET_FORCE_SHMLBA and provide
a target_shmlba() function if appropriate, and update
do_shmat() to honour them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse
of the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Some of them use guard symbol TARGET_SYSCALL_H, but we also have
CRIS_SYSCALL_H, MICROBLAZE_SYSCALLS_H, TILEGX_SYSCALLS_H and
__UC32_SYSCALL_H__. They all upset scripts/clean-header-guards.pl.
Reuse of the same guard symbol TARGET_SYSCALL_H in multiple headers is
okay as long as they cannot be included together. The script can't
tell, so it warns.
The script dislikes the other guard symbols, too. They don't match
their file name (they should, to make guard collisions less likely),
and __UC32_SYSCALL_H__ is a reserved identifier.
Clean them all up: use guard symbol $target_TARGET_SYSCALL_H for
linux-user/$target/target_sycall.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Currently we define a QEMU-internal errno TARGET_QEMU_ESIGRETURN
only on the MIPS and PPC targets; move this to errno_defs.h
so it is available for all architectures, and renumber it to 513.
We pick 513 because this is safe from future use as a system call return
value: Linux uses it as ERESTART_NOINTR internally and never allows that
errno to escape to userspace.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-4-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: TARGET_ERESTARTSYS split out into preceding patch, add comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Sync syscall numbers to match the linux v4.5-rc1 kernel.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This fixes double-definitions in linux-user builds when using the UST
tracing backend (which indirectly includes the system's "syscall.h").
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Without this fix, qemu segfaults when emulating the sigaltstack syscall,
because it incorrectly treats the ss_flags field as 64 bits rather than 32
bits.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The argument to the mlockall system call is not necessarily the same on
all platforms and thus may require translation prior to passing to the
host.
For example, PowerPC 64 bit platforms define values for MCL_CURRENT
(0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms
(0x1 and 0x2, respectively)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The ELF V2 ABI for PPC64 defines MINSIGSTKSZ as 4096 bytes whereas it was
2048 previously.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Popular glibc based distributions[1] require minimum
2.6.32 as kernel version. For some targets 2.6.18
would be enough, but dropping so low would mean some
suboptimal system calls could get used.
Set the minimum kernel advertized to 2.6.32 for
all architectures but aarch64 to ensure working qemu
linux-user in case host kernel is older.
[1] https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/921078
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Creating target_structs header in linux-user/$arch/ and making
target_ipc_perm and target_shmid_ds its first inhabitants.
The struct defintions may/should be further fine-tuned by arch maintainers.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Linux manages to have three separate orderings of the arguments to
the clone() syscall on different architectures. In the kernel these
are selected via CONFIG_CLONE_BACKWARDS and CONFIG_CLONE_BACKWARDS2.
Clean up our implementation of this to use similar #define names
rather than a TARGET_* ifdef ladder.
This includes behaviour changes fixing bugs on cris, x86-64, m68k,
openrisc and unicore32. cris had explicit but wrong handling; the
others were just incorrectly using QEMU's default, which happened
to be the equivalent of CONFIG_CLONE_BACKWARDS. (unicore32 appears
to be broken in the mainline kernel in that it tries to use arg3 for
both parent_tidptr and newtls simultaneously -- we don't attempt
to emulate this bug...)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU
related -- they are specific to the TLS ABI for a a particular OS.
Move them into the linux-user/ tree where they belong.
target-lm32 had entirely unused implementations, since it has no
linux-user target; just drop them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
N32 is a 64-bit cpu with a 32-bit address space. We have
existing cpp defines for this situation, but weren't using them.
This does mean that the linux-user/mipsn32 directory must be
merged with the linux-user/mips64 directory, and differences
must be resolved via ifdefs.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add syscall numbers for new syscall numbers; this brings us
into line with Linux 2.6.39.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
