Replay doesn't notify registered notifiers but the one passed
to it. So it's meaningless to check the registered notifier's
synthetic flag.
There is no issue currently as all replay use cases have MAP
flag set, but let's be robust.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230615032626.314476-3-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu found a potential issue:
"The other thing is when I am looking at the new code I found that we
actually extended the replay() to be used also in dirty tracking of vfio,
in vfio_sync_dirty_bitmap(). For that maybe it's already broken if
unmap_all() because afaiu log_sync() can be called in migration thread
anytime during DMA so I think it means the device is prone to DMA with the
IOMMU pgtable quickly erased and rebuilt here, which means the DMA could
fail unexpectedly. Copy Alex, Kirti and Neo."
Fix it by replacing the unmap_all() to only evacuate the iova tree
(keeping all host mappings untouched, IOW, don't notify UNMAP), and
do a full resync in page walk which will notify all existing mappings
as MAP. This way we don't interrupt with any existing mapping if there
is (e.g. for the dirty sync case), meanwhile we keep sync too to latest
(for moving a vfio device into an existing iommu group).
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230615032626.314476-2-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Slave/master nomenclature was replaced with backend/frontend in commit
1fc19b6527 ("vhost-user: Adopt new backend naming")
This patch replaces all remaining uses of master and slave in the
codebase.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
virtio_scsi_dataplane_stop() calls blk_drain_all(), which invokes
->drained_begin()/->drained_end() after we've already detached the host
notifier. virtio_scsi_drained_end() currently attaches the host notifier
again and leaves it dangling after dataplane has stopped.
This results in the following assertion failure because
virtio_scsi_defer_to_dataplane() is called from the IOThread instead of
the main loop thread:
qemu-system-x86_64: ../softmmu/memory.c:1111: memory_region_transaction_commit: Assertion `qemu_mutex_iothread_locked()' failed.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1680
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230611193924.2444914-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To use the newly introduced PC machine class local variable.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230609164107.23404-1-suravee.suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bug introducing when refactoring. Otherway, the guest never received
the used buffer.
Fixes: be4278b65f ("vdpa: extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602173451.1917999-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
QEMU does not emulate it so it must be disabled as long as the backend
does not support it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602173328.1917385-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
in vhost_dev_enable_notifiers(), if virtio_bus_set_host_notifier(true)
fails, we call vhost_dev_disable_notifiers() that executes
virtio_bus_set_host_notifier(false) on all queues, even on queues that
have failed to be initialized.
This triggers a core dump in memory_region_del_eventfd():
virtio_bus_set_host_notifier: unable to init event notifier: Too many open files (-24)
vhost VQ 1 notifier binding failed: 24
.../softmmu/memory.c:2611: memory_region_del_eventfd: Assertion `i != mr->ioeventfd_nb' failed.
Fix the problem by providing to vhost_dev_disable_notifiers() the
number of queues to disable.
Fixes: 8771589b6f ("vhost: simplify vhost_dev_enable_notifiers")
Cc: longpeng2@huawei.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20230602162735.3670785-1-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Enable SVQ with VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <778d642ecae6deed8a218b0e6232e4d7bb96b439.1685704856.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces vhost_vdpa_net_load_offloads() to
restore offloads state at device's startup.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <7e2b5cad9c48c917df53d80dec27dbfeb513e1a3.1685704856.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support restoring offloads state in vdpa, it is necessary to
expose the function virtio_net_supported_guest_offloads().
According to VirtIO standard, "Upon feature negotiation
corresponding offload gets enabled to preserve backward compatibility.".
Therefore, QEMU uses this function to get the device supported offloads.
This allows QEMU to know the device's defaults and skip the control
message sending if these defaults align with the driver's configuration.
Note that the device's defaults can mismatch the driver's configuration
only at live migration.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <43679506f3f039a7aa2bdd5b49785107b5dfd7d4.1685704856.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VirtIONet structure is not modified in
virtio_net_supported_guest_offloads().
Therefore, make it const to allow this function to
accept const variables.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <489b09c3998ac09b9135e57a7dd8c56a4be8cdf9.1685704856.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We can use virtio_vdev_has_feature() instead of manually
accessing the features.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <ff838d30206209fd865511b16ffb34cc0d5e8d8f.1685704856.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VirtIODevice structure is not modified in
virtio_vdev_has_feature(). Therefore, make it const
to allow this function to accept const variables.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Eugenio Pérez Martin <eperezma@redhat.com>
Message-Id: <16c0561b921310a32c240a4fb6e8cee3ffee16fe.1685704856.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vdpa devices that use va addresses neeeds these maps shared.
Otherwise, vhost_vdpa checks will refuse to accept the maps.
The mmap call will always return a page aligned address, so removing the
qemu_memalign call. Keeping the ROUND_UP for the size as we still need
to DMA-map them in full.
Not applying fixes tag as it never worked with va devices.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602143854.1879091-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We need to call it from resource cleanup context, as munmap needs the
size of the mappings.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230602143854.1879091-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It was a mistake to forbid in all cases, as SVQ is already able to send
all the CVQ messages before start forwarding data vqs. It actually
caused a regression, making impossible to migrate device previously
migratable.
Fixes: 36e4647247 ("vdpa: add vhost_vdpa_net_valid_svq_features")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602143854.1879091-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Since KVM_MAX_VCPUS is currently defined to 1024 for x86 as shown in
arch/x86/include/asm/kvm_host.h, update QEMU limits to the same number.
In case KVM could not support the specified number of vcpus, QEMU would
return the following error message:
qemu-system-x86_64: kvm_init_vcpu: kvm_get_vcpu failed (xxx): Invalid argument
Also, keep max_cpus at 288 for machine version 8.0 and older.
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230607205717.737749-3-suravee.suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Switching to SMBIOS3.0 by default shifts some addresses, so we get this
change in tests/data/acpi/q35/SSDT.dimmpxm :
@@ -389,6 +389,6 @@
}
}
- Name (MEMA, 0x07FFE000)
+ Name (MEMA, 0x07FFF000)
}
update the expected file to match.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, pc-q35 and pc-i44fx machine models are default to use SMBIOS 2.8
(32-bit entry point). Since SMBIOS 3.0 (64-bit entry point) is now fully
supported since QEMU 7.0, default to use SMBIOS 3.0 for newer machine
models. This is necessary to avoid the following message when launching
a VM with large number of vcpus.
"SMBIOS 2.1 table length 66822 exceeds 65535"
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230607205717.737749-2-suravee.suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
On pegasos2 which has ACPI as part of VT8231 south bridge the board
firmware writes PM control register by accessing the second byte so
addr will be 1. This wasn't handled correctly and the write went to
addr 0 instead. Remove the acpi_pm1_cnt_write() function which is used
only once and does not take addr into account and handle non-zero
address in acpi_pm_cnt_{read|write}. This fixes ACPI shutdown with
pegasos2 firmware.
The issue below is possibly related to the same memory core bug.
Link: https://gitlab.com/qemu-project/qemu/-/issues/360
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230607200125.A9988746377@zero.eik.bme.hu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Validate cluster and NUMA node boundary on ARM and RISC-V
* various small TCG features from newer processors
* Remove dubious 'event_notifier-posix.c' include
* fix git-submodule.sh in releases
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSZS0IUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN+tgf/axJdG9NXKCyXgc0vzjKVhSR4Y+tC
EPxkg7Rq7uOMgbph9oTS/2Kzh9LnP6kLt2qnS4igRHGuEBd58yD6fFNDv0LJsK/l
B/d0WGHMKV0KMYOX24rkyfohVu37GhVRsiVSIlIiQVTC9JtYer7WxdnyoDaPKvY8
dpbKgDrd59vAlsHrpj7ZubVQPcL3lXrLryimpDohMH6Ba+4wZq+7dKPpal97QOP2
3i7isUBTQiMOcVjW6GEiNcDLSJqj5DSgylhdFnaBsq/ThpC2PxWoXcCbV28QELzf
5+J+RXQavmeWKZMR0q98iBzWbrsVtaSxAkHHiwbUMMqQvkfY6Dpo5dMHWw==
=WHE2
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* kvm: reuse per-vcpu stats fd to avoid vcpu interruption
* Validate cluster and NUMA node boundary on ARM and RISC-V
* various small TCG features from newer processors
* Remove dubious 'event_notifier-posix.c' include
* fix git-submodule.sh in releases
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSZS0IUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroN+tgf/axJdG9NXKCyXgc0vzjKVhSR4Y+tC
# EPxkg7Rq7uOMgbph9oTS/2Kzh9LnP6kLt2qnS4igRHGuEBd58yD6fFNDv0LJsK/l
# B/d0WGHMKV0KMYOX24rkyfohVu37GhVRsiVSIlIiQVTC9JtYer7WxdnyoDaPKvY8
# dpbKgDrd59vAlsHrpj7ZubVQPcL3lXrLryimpDohMH6Ba+4wZq+7dKPpal97QOP2
# 3i7isUBTQiMOcVjW6GEiNcDLSJqj5DSgylhdFnaBsq/ThpC2PxWoXcCbV28QELzf
# 5+J+RXQavmeWKZMR0q98iBzWbrsVtaSxAkHHiwbUMMqQvkfY6Dpo5dMHWw==
# =WHE2
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 10:24:34 AM CEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
git-submodule.sh: allow running in validate mode without previous update
target/i386: implement SYSCALL/SYSRET in 32-bit emulators
target/i386: implement RDPID in TCG
target/i386: sysret and sysexit are privileged
target/i386: AMD only supports SYSENTER/SYSEXIT in 32-bit mode
target/i386: Intel only supports SYSCALL/SYSRET in long mode
target/i386: TCG supports WBNOINVD
target/i386: TCG supports XSAVEERPTR
target/i386: do not accept RDSEED if CPUID bit absent
target/i386: TCG supports RDSEED
target/i386: TCG supports 3DNow! prefetch(w)
target/i386: fix INVD vmexit
kvm: reuse per-vcpu stats fd to avoid vcpu interruption
hw/riscv: Validate cluster and NUMA node boundary
hw/arm: Validate cluster and NUMA node boundary
numa: Validate cluster and NUMA node boundary if required
hw/remote/proxy: Remove dubious 'event_notifier-posix.c' include
build: further refine build.ninja rules
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Add msys2 gitlab-CI artifacts
* Minor qtest fixes
-----BEGIN PGP SIGNATURE-----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=4Jl2
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-06-26' of https://gitlab.com/thuth/qemu into staging
* Improve gitlab-CI with regards to handling of stable staging branches
* Add msys2 gitlab-CI artifacts
* Minor qtest fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmSZR6gRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWoFQ//VieL2UTOBXvw6TlMCYEpqKURdKYc7Uqp
# Y/gJRHK+EQ3C4BGzv8l/P07/H3N5da+8Y2Ta37tNritbs+tyrYVIQAY3+bugG6hO
# lIF5oUGTcbOkC6Z1ajtjHcmxCj+2Z8uumlFW44zMR4HzzcmaRDyVDoU0gUg0Ohkt
# aNdpjJEA8BRzvQTjx92v31uILk8zpd0yL+40p/2DSx0Dt5eoqTjFN4QCgqk+C9A3
# WiiIkJBIIPgfp3XScVGeKS2ZfGSL7/QcJF0wbkkLhWfuF5oBjjkQCJlGYxpAnnbv
# J7esrNCxsks7T7SC/QnEzyePMXxX1DgV9znwBtEobLTQ38LcDWpdqdr0VYgyQhdo
# 9NgBLNkI3J1JCmJ5amCLRNcmH75cMnhxXeZYsjZ70VnirgFEQS1C+YELadCY8QWa
# S3YS/ZvOc5wHFdTrsfIyJG+2AjbefyboiXojzd/sFEY0485A8malTdtn96dhHjkZ
# KvInxQHV7uoUhok1QC68taMHbRUfA6jU7STYjkgDjnf+L+ywIbbKJE7LpyicvnsU
# MUR+9H4EsSlmN2koc9bopG0sspLThviIKORqzPEo3WyBj5jCIZ7tkvUEqBUkJwx2
# hISZeqdhP+wRVR4Ter0RNywjk2gSbaYcPzlnbaRYZ5OoiRchXr+uh/X0dIdkCNPP
# YwB1Y0wBpPU=
# =4Jl2
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 10:09:12 AM CEST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-06-26' of https://gitlab.com/thuth/qemu:
tests/qtest/cxl-test: Clean up temporary directories after testing
gitlab-ci: add msys2 meson test to junit report
gitlab-ci: grab msys2 meson-logs as artifacts
gitlab: support disabling job auto-run in upstream
gitlab: avoid extra pipelines for tags and stable branches
gitlab: stable staging branches publish containers in a separate tag
gitlab: allow overriding name of the upstream repository
gitlab: centralize the container tag name
tests/qtest: Fix a comment typo in vhost-user-test.c
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The call to git-submodule.sh done in configure may happen without a
previous checkout of the roms/SLOF submodule, or even without a
previous run of the script.
So, handle creating a .git-submodule-status file even in validate
mode. If git is absent, ensure that all passed directories exists
(because you should be in a fresh untar and will not have stale
arguments to git-submodule.sh) but do no other checks. If git
is present, ensure that .git-submodule-status contains an entry
for all submodules passed on the command line.
With this change, "ignore" mode is not needed anymore.
Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Fixes: b11f9bd96f ("configure: move SLOF submodule handling to pc-bios/s390-ccw", 2023-06-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD supports both 32-bit and 64-bit SYSCALL/SYSRET, but the TCG only
exposes it for 64-bit targets. For system emulation just reuse the
helper; for user-mode emulation the ABI is the same as "int $80".
The BSDs does not support any fast system call mechanism in 32-bit
mode so add to bsd-user the same stub that FreeBSD has for 64-bit
compatibility mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RDPID corresponds to a RDMSR(TSC_AUX); however, it is unprivileged
so for user-mode emulation we must provide the value that the kernel
places in the MSR. For Linux, it is a combination of the current CPU
and the current NUMA node, both of which can be retrieved with getcpu(2).
Also try sched_getcpu(), which might be there on the BSDs. If there is
no portable way to retrieve the current CPU id from userspace, return 0.
RDTSCP is reimplemented as RDTSC + RDPID ECX; the differences in terms
of serializability are not relevant to QEMU.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WBNOINVD is the same as INVD or WBINVD as far as TCG is concerned,
since there is no cache in TCG and therefore no invalidation side effect
in WBNOINVD.
With respect to SVM emulation, processors that do not support WBNOINVD
will ignore the prefix and treat it as WBINVD, while those that support
it will generate exactly the same vmexit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
XSAVEERPTR is actually a fix for an errata; TCG does not have the issue.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG implements RDSEED, and in fact uses qcrypto_random_bytes which is
secure enough to match hardware behavior. Expose it to guests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AMD prefetch(w) instructions have not been deprecated together with the rest
of 3DNow!, and in fact are even supported by newer Intel processor. Mark them
as supported by TCG, as it supports all of 3DNow!.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to a typo or perhaps a brain fart, the INVD vmexit was never generated.
Fix it (but not that fixing just the typo would break both INVD and WBINVD,
due to a case of two wrongs making a right).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A regression has been detected in latency testing of KVM guests.
More specifically, it was observed that the cyclictest
numbers inside of an isolated vcpu (running on isolated pcpu) are:
Where a maximum of 50us is acceptable.
The implementation of KVM_GET_STATS_FD uses run_on_cpu to query
per vcpu statistics, which interrupts the vcpu (and is unnecessary).
To fix this, open the per vcpu stats fd on vcpu initialization,
and read from that fd from QEMU's main thread.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two RISCV machines where NUMA is aware: 'virt' and 'spike'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster has been associated with multiple NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230509002739.18388-4-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two ARM machines where NUMA is aware: 'virt' and 'sbsa-ref'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster have been associated with different NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-3-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For some architectures like ARM64, multiple CPUs in one cluster can be
associated with different NUMA nodes, which is irregular configuration
because we shouldn't have this in baremetal environment. The irregular
configuration causes Linux guest to misbehave, as the following warning
messages indicate.
-smp 6,maxcpus=6,sockets=2,clusters=1,cores=3,threads=1 \
-numa node,nodeid=0,cpus=0-1,memdev=ram0 \
-numa node,nodeid=1,cpus=2-3,memdev=ram1 \
-numa node,nodeid=2,cpus=4-5,memdev=ram2 \
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/sched/topology.c:2271 build_sched_domains+0x284/0x910
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-268.el9.aarch64 #1
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : build_sched_domains+0x284/0x910
lr : build_sched_domains+0x184/0x910
sp : ffff80000804bd50
x29: ffff80000804bd50 x28: 0000000000000002 x27: 0000000000000000
x26: ffff800009cf9a80 x25: 0000000000000000 x24: ffff800009cbf840
x23: ffff000080325000 x22: ffff0000005df800 x21: ffff80000a4ce508
x20: 0000000000000000 x19: ffff000080324440 x18: 0000000000000014
x17: 00000000388925c0 x16: 000000005386a066 x15: 000000009c10cc2e
x14: 00000000000001c0 x13: 0000000000000001 x12: ffff00007fffb1a0
x11: ffff00007fffb180 x10: ffff80000a4ce508 x9 : 0000000000000041
x8 : ffff80000a4ce500 x7 : ffff80000a4cf920 x6 : 0000000000000001
x5 : 0000000000000001 x4 : 0000000000000007 x3 : 0000000000000002
x2 : 0000000000001000 x1 : ffff80000a4cf928 x0 : 0000000000000001
Call trace:
build_sched_domains+0x284/0x910
sched_init_domains+0xac/0xe0
sched_init_smp+0x48/0xc8
kernel_init_freeable+0x140/0x1ac
kernel_init+0x28/0x140
ret_from_fork+0x10/0x20
Improve the situation to warn when multiple CPUs in one cluster have
been associated with different NUMA nodes. However, one NUMA node is
allowed to be associated with different clusters.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-2-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
event_notifier-posix.c is registered in meson's util_ss[] source
set, which is built as libqemuutil.a.p library. Both tools and
system emulation binaries are linked with qemuutil, so there is
no point in including this source file.
Introduced in commit bd36adb8df ("multi-process: create IOHUB
object to handle irq").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230606134913.93724-1-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit b0fcc6fc7f ("build: rebuild build.ninja using
"meson setup --reconfigure"", 2023-05-19) I changed the build.ninja
rule in the Makefile to use "meson setup" so that the Makefile would
pick up a changed path to the meson binary.
However, there was a reason why build.ninja was rebuilt using $(NINJA)
itself. Namely, ninja has its own cache of file modification times,
and if it does not know about the modification that was done outside
its control, it will *also* try to regenerate build.ninja. This can be
simply by running "make" on a fresh tree immediately after "configure";
that will trigger an unnecessary meson run.
So, apply a refinement to the rule in order to cover both cases:
- track the meson binary that was used (and that is embedded in
build.ninja's reconfigure rules); to do this, write build.ninja.stamp
right after executing meson successfully
- if it changed, force usage of "$(MESON) setup --reconfigure" to
update the path in the reconfigure rule
- if it didn't change, use "$(NINJA) build.ninja" just like before
commit b0fcc6fc7f.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's good style to clean up temporary directories when they
are not needed anymore.
Message-Id: <20230622114132.372898-1-thuth@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Rename build directory to "build", like most other CI builds.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230620153720.514882-2-marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In forks QEMU_CI=1 can be used to create a pipeline but not auto-run any
jobs. In upstream jobs always auto-run, which is equiv of QEMU_CI=2.
This supports setting QEMU_CI=1 in upstream, to disable job auto-run.
This can be used to preserve CI minutes if repushing a branch to staging
with a specific fix that only needs testing in limited scenarios.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-6-berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In upstream context we only run pipelines on staging branches, and
limited publishing jobs on the default branch.
We don't want to run pipelines on stable branches, or tags, because
the content will have already been tested on a staging branch before
getting pushed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the stable staging branches publish containers under the 'latest' tag
they will clash with containers published on the primary staging branch,
as well as with each other. This introduces logic that overrides the
container tag when jobs run against the stable staging branches.
The CI_COMMIT_REF_SLUG variable we use expands to the git branch name,
but with most special characters removed, such that it is valid as a
docker tag name. eg 'staging-8.0' will get a slug of 'staging-8-0'
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The CI rules have special logic for what happens in upstream. To enable
contributors who modify CI rules to test this logic, however, they need
to be able to override which repo is considered upstream. This
introduces the 'QEMU_CI_UPSTREAM' variable
git push gitlab <branch> -o ci.variable=QEMU_CI_UPSTREAM=berrange
to make it look as if my namespace is the actual upstream. Namespace in
this context refers to the path fragment in gitlab URLs that is above
the repository. Typically this will be the contributor's gitlab login
name.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-3-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We use a fixed container tag of 'latest' so that contributors' forks
don't end up with an ever growing number of containers as they work
on throwaway feature branches.
This fixed tag causes problems running CI upstream in stable staging
branches, however, because the stable staging branch will publish old
container content that clashes with that needed by primary staging
branch. This makes it impossible to reliably run CI pipelines in
parallel in upstream for different staging branches.
This introduces $QEMU_CI_CONTAINER_TAG global variable as a way to
change which tag container publishing uses. Initially it can be set
by contributors as a git push option if they want to override the
default use of 'latest' eg
git push gitlab <branch> -o ci.variable=QEMU_CONTAINER_TAG=fish
this is useful if contributors need to run pipelines for different
branches concurrently in their forks.
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230621101710.297975-4-mzamazal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
