This patch resolves a bug in memory listener registration.
"range_add" callback was called on each section of the both
address space (IO and memory space) even if it doesn't match
the address space filter.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
* 's390-for-upstream' of git://repo.or.cz/qemu/agraf:
target-s390x: Update s390x_{tod,cpu}_timer() to use S390CPU
target-s390x: QOM'ify CPU init
target-s390x: QOM'ify CPU reset
target-s390x: QOM'ify CPU
The vector interrupt has higher priority than interrupt_level_n.
Also check only interrupt_level_n concurency when TL > 0, the traps of
other types may be nested.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't produce stray irq 5, don't overwrite ivec_data if still busy with
processing of the previous interrupt.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In place of CPUS390XState pass S390CPU as opaque from the new initfn.
cpu_interrupt() is anticipated to take a CPUState in the future.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Move code from cpu_s390x_init() into an initfn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Move code from cpu_state_reset() to s390_cpu_reset().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Embed CPUS390XState as first member of S390CPU.
Since -cpu is being ignored, make TYPE_S390_CPU non-abstract.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Make clean does not clean the 'qom' directory, leaving *.o and *.d files. This
patch fixes this.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This library is needed when using 'ust/tracepoint.h'.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The function usleep is not available for all supported platforms:
at least some versions of MinGW don't support it.
usleep was also declared obsolete by POSIX.1-2001.
The function g_usleep is part of glib2.0, so it is available for
all supported platforms.
Using nanosleep would also be possible but needs more code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
gcc reports an error when the code is compiled with -Wmissing-format-attribute.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
It's typical to prepend or append parameters to an argument string so
that other places in ./configure can add parameters without clobbering
the string. In the mingw32 libs_qga case there is a typo "$lib_qga"
instead of "$libs_qga".
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
A strong limitation of QOM right now is that unconverted ports
(e.g. all...) do not give a canonical path to devices that are
part of the board. This in turn makes it impossible to replace
PROP_PTR with a QOM link for example.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We want the composition tree to to be in order by the time we call
qdev_init, so that a single set of the toplevel realize property can
propagate all the way down the composition tree.
This is not the case so far. Unfortunately, this is incompatible
with calling qdev_init in the constructor wrappers for devices,
so for now we need to unattach some devices that are created through
those wrappers. This will be fixed by removing qdev_init and instead
setting the toplevel realize property after machine init.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is QOM "mkdir -p". It is useful when referring to
container objects such as "/machine".
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kiszka/queues/slirp:
slirp: Signal free input buffer space to io-thread
w32/slirp: Undefine error constants before their redefinition
slirp: use socket_set_nonblock
slirp: clean up conflicts with system headers
* stefanha/tracing:
tracetool: dtrace: handle in and next reserved words
tracetool: dtrace disabled-events fix
Makefile.target: code stp dependency on trace-events
We never actually clear the TEMT (transmit sending register empty) flag when
populating the TSR. We set the flag, but since it's never cleared, setting it
is sort of pointless..
I found this with a unit test case.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I'm not sure if the retry logic has ever worked when not using FIFO mode. I
found this while writing a test case although code inspection confirms it is
definitely broken.
The TSR retry logic will never actually happen because it is guarded by an
'if (s->tsr_rety > 0)' but this is the only place that can ever make the
variable greater than zero. That effectively makes the retry logic an 'if (0)'.
I believe this is a typo and the intention was >= 0. Once this is fixed though,
I see double transmits with my test case. This is because in the non FIFO
case, serial_xmit may get invoked while LSR.THRE is still high because the
character was processed but the retransmit timer was still active.
We can handle this by simply checking for LSR.THRE and returning early. It's
possible that the FIFO paths also need some attention.
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On linux, qemu_timeval will always be two long ints. On windows, we use our
own struct definition. This should fix win64.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This bug existed since the first commit. Fortunately, the affected
registers have no functionality in qemu. This will only prevent the
following warning:
milkymist_vgafb: write access to unknown register 0x00000034
Signed-off-by: Michael Walle <michael@walle.cc>
The new version introduces the following new registers:
- SoC clock frequency: read-only of system clock used on the SoC
- debug scratchpad: 8 bit scratchpad register
- debug write lock: write once register, without any function on QEMU
Signed-off-by: Michael Walle <michael@walle.cc>
* 'qom-cpu-unicore32.v3' of git://github.com/afaerber/qemu-cpu:
target-unicore32: Move CPU-dependent init into initfn
target-unicore32: QOM'ify CPU
target-unicore32: License future contributions under GPLv2+
target-unicore32: Relicense to GPLv2+
MAINTAINERS: Add entry for UniCore32
* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
ARM: Permit any ARMv6K CPU to read the MVFR0 and MVFR1 VFP registers.
target-arm: Minimalistic CPU QOM'ification
target-arm: Drop cpu_arm_close()
Older pod2man don't have a --utf8 switch, check for this in conffigure
and use it only when present. Fixes build on RHEL-5.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Some locale settings let make fail or create wrong results
because tr '[:lower:]' '[:upper:]' which is used to convert
from lower to upper case depends on the locale.
With locale tr_TR.UTF-8, lower case 'i' is not converted to 'I'.
This results in wrong entries in config-host.h like these ones:
#define CONFIG_QEMU_PREFiX "/usr/local"
#define CONFIG_QEMU_BiNDiR "/usr/local/bin"
This problem was reported by Emre Ersin.
The same problem occurs when configure creates the target specific
files config-target.mak. They get wrong declarations:
TARGET_CRiS=y
TARGET_i386=y
TARGET_MiCROBLAZE=y
TARGET_MiPS64=y
TARGET_MiPS=y
TARGET_UNiCORE32=y
It is sufficient to restrict the conversion to the characters a-z.
Using this explicit range avoids the dependency on the locale
settings and is also shorter.
v2:
POSIX says that 'tr a-z' is unspecified outside of the POSIX
locale, so we must set LC_ALL=C to make sure that we are using
POSIX (hint from Eric Blake, thanks).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Avoid this warning on OpenBSD:
CC tests/rtc-test.o
/src/qemu/tests/rtc-test.c: In function 'check_time':
/src/qemu/tests/rtc-test.c:171: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t'
/src/qemu/tests/rtc-test.c:173: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t'
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This massively accelerates slirp reception speed: If data arrives
faster than the guest can read it from the input buffer, the file
descriptor for the corresponding socket was taken out of the fdset for
select. However, the event of the guest reading enough data from the
buffer was not signaled. Thus, the io-thread only noticed this change
on the next time-driven poll. Fix this by kicking the io-thread as
required.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Trace objects are also needed if tracing is enabled.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This also includes a qtest wrapper script to make it easier to launch qtest
tests directly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch combines qtest and -icount together to turn the vm_clock
into a source that can be fully managed by the client. To this end new
commands clock_step and clock_set are added. Hooking them with libqtest
is left as an exercise to the reader.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since /i440fx/piix3 is being removed from the composition tree, the
IO-APIC is placed under /i440fx. This is wrong and should be changed
as soon as the /i440fx/piix3 path is put back.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The idea behind qtest is pretty simple. Instead of executing a CPU via TCG or
KVM, rely on an external process to send events to the device model that the CPU
would normally generate.
qtest presents itself as an accelerator. In addition, a new option is added to
establish a qtest server (-qtest) that takes a character device. This is what
allows the external process to send CPU events to the device model.
qtest uses a simple line based protocol to send the events. Documentation of
that protocol is in qtest.c.
I considered reusing the monitor for this job. Adding interrupts would be a bit
difficult. In addition, logging would also be difficult.
qtest has extensive logging support. All protocol commands are logged with
time stamps using a new command line option (-qtest-log). Logging is important
since ultimately, this is a feature for debugging.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces new test reporting infrastructure based on
gtester and gtester-report.
Also, all existing tests are moved to tests/, and tests/Makefile
is reorganized to factor out the commonalities in the rules.
Signed-off-by: Anthony Liguori <aliguori@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If there are "disabled" entries in the trace-events file then
linetod_nop() is called if the backend is dtrace, it's currently
not present. Also equivalent fix for stap.
Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This lets the user specify the desired semantics. By default, the RTC
will follow adjustments from the host's NTP client, and will remain in
sync when the virtual machine is stopped. The previous behavior, which
provides determinism with both icount and qtest, remains available with
"-rtc clock=vm".
pl031 supports migration, so we need to convert the time base from
rtc_clock to vm_clock and back for backwards compatibility. (The
rtc_clock may not be synchronized on the two machines, especially with
savevm/loadvm, so the conversion is needed anyway. And since any time
base will do, why not pick the one base that is backwards compatible).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
