fix incorrect print type in vhost_virtqueue_stop
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556605773-42019-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
remove the dead code
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Message-Id: <1556604614-32081-1-git-send-email-wangjie88@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
'family' option is not part of type 2 table and if user tries to use it
as such QEMU will error out with an unknow option error.
Drop it from docs lest it confuse users.
Fixes: b155eb1d04 ("smbios: document cmdline options for smbios type 2-4, 17 structures")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1558448611-315074-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The only remaining caller of pci_get_bus_devfn() is pci_nic_init_nofail(),
itself an old compatibility function. Fold the two together to avoid
re-using the stale interface.
While we're there replace the explicit fprintf()s with error_report().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190513061939.3464-6-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The is_bridge field in PCIDevice acts as a bool, but is declared as an int.
Declare it as a bool for clarity, and change everything that writes it to
use true/false instead of 0/1 to match.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190513061939.3464-5-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since c2077e2c "pci: Adjust PCI config limit based on bus topology",
pci_adjust_config_limit() has been used in the config space read and write
paths to only permit access to extended config space on buses which permit
it. Specifically it prevents access on devices below a vanilla-PCI bus via
some combination of bridges, even if both the host bridge and the device
itself are PCI-E.
It accomplishes this with a somewhat complex call up the chain of bridges
to see if any of them prohibit extended config space access. This is
overly complex, since we can always know if the bus will support such
access at the point it is constructed.
This patch simplifies the test by using a flag in the PCIBus instance
indicating whether extended configuration space is accessible. It is
false for vanilla PCI buses. For PCI-E buses, it is true for root
buses and equal to the parent bus's's capability otherwise.
For the special case of sPAPR's paravirtualized PCI root bus, which
acts mostly like vanilla PCI, but does allow extended config space
access, we override the default value of the flag from the host bridge
code.
This should cause no behavioural change.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190513061939.3464-4-david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
build_append_foo() API doesn't need explicit endianness conversions
which eliminates a source of errors and it makes build_mcfg() look like
declarative definition of MCFG table in ACPI spec, which makes it easy
to review.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
v3:
* add some comment on the Configuration Space base address allocation
structure
v2:
* miss the reserved[8] of MCFG in last version, add it back
* drop SOBs and make sure bios-tables-test all OK
Message-Id: <20190521062836.6541-3-richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we have two identical build_mcfg functions.
Consolidate them in acpi/pci.c.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
v4:
* ACPI_PCI depends on both ACPI and PCI
* rebase on latest master, adjust arm Kconfig
v3:
* adjust changelog based on Igor's suggestion
Message-Id: <20190521062836.6541-2-richardw.yang@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- semihosting re-factor (used in system tests)
- aarch64 and alpha system tests
- editorconfig tweak for .S
- some docker image updates
- iotests clean-up (without make check inclusion)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAlztYToACgkQ+9DbCVqe
KkQU9wf/Uv5qBgDn9MwcCt8tzHTX/i21QHwFLBbCmFoUwZjSridZ2KV6Ma3ig4mF
xY+8Cr5oZT186V+aD39K6KCZKqZRulIpRVNkOKXEfAAklUoAyQs95Wa8F8LtO1eG
vOtOYEdkXQQiAnlnQ+eaGiZQ2mpbCbREa10JrBhxp6iXh0PYcvtD7iAlOldqIvd2
hDRwOgTtYoiiKh6UdediAgQsRvv6oNPHFUOjWgrGxfhPWKbjCVKl7VS4furg9zux
j/S0E0xYKhj+JNq3arjiMUMl19TauCBQLrbQpphd1jOl1s7bELRjAuaKM60TVIbW
Hd2/PYbGnkpyUcJQh0Pr1cb4RMcznw==
=lvtu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging
Various testing updates
- semihosting re-factor (used in system tests)
- aarch64 and alpha system tests
- editorconfig tweak for .S
- some docker image updates
- iotests clean-up (without make check inclusion)
# gpg: Signature made Tue 28 May 2019 17:26:34 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-280519-2: (27 commits)
tests/qemu-iotests: re-format output to for make check-block
tests/qemu-iotests/group: Re-use the "auto" group for tests that can always run
Makefile.target: support per-target coverage reports
Makefile: include per-target build directories in coverage report
Makefile: fix coverage-report reference to BUILD_DIR
.travis.yml: enable aarch64-softmmu and alpha-softmmu tcg tests
tests/tcg/alpha: add system boot.S
tests/tcg/multiarch: expand system memory test to cover more
tests/tcg/minilib: support %c format char
tests/tcg/multiarch: move the system memory test
tests/tcg/aarch64: add system boot.S
editorconfig: add settings for .s/.S files
tests/tcg/multiarch: add hello world system test
tests/tcg/multiarch: add support for multiarch system tests
tests/docker: Test more components on the Fedora default image
tests/docker: add ubuntu 18.04
MAINTAINERS: update for semihostings new home
target/mips: convert UHI_plog to use common semihosting code
target/mips: only build mips-semi for softmmu
target/arm: correct return values for WRITE/READ in arm-semi
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJc6rmrAAoJENSXKoln91pleiIH/iII48dveAe846j+leRJzvq0
xwykZ+uc1gM8vwHjJmQL2iz8BSx9irYg68jNgZNw+0/7pOqKVkyDt7T9CMpNIgI/
xsbaX3ta90Rhw6Cnw9h99SsWJAg2Oq4Phv7yCIgDMoNmph/caZyd/95ThmmQ2MXr
BDOehxODcDyJAO3KIMODccuD6R0ofM2JKXUk2S5s7v1FjYm5fxfzOcx8P4P4lGP3
AB/k+iVMaEaZJWDHhPXte/5tF9aW8s39CUoe0BE/Cqje3ehLEY/6XxMamXiaWf/G
2taLvJ6lZ1T5nRmcTCBFfO4Sk3BEBeGlqF72nIlzeCJCe9SvISfwEhsHNkfsqiE=
=hSSg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-may-19-2019-v3' into staging
MIPS queue for May 19th, 2019 - v3
# gpg: Signature made Sun 26 May 2019 17:07:07 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-may-19-2019-v3:
BootLinuxSshTest: Test some userspace commands on Malta
target/mips: realign comments to fix checkpatch warnings
target/mips: add or remove space to fix checkpatch errors
linux-user: fix __NR_semtimedop undeclared error
mips: Decide to map PAGE_EXEC in map_address
target/mips: Refactor and fix INSERT.<B|H|W|D> instructions
target/mips: Refactor and fix COPY_U.<B|H|W> instructions
target/mips: Refactor and fix COPY_S.<B|H|W|D> instructions
target/mips: Fix MSA instructions ST.<B|H|W|D> on big endian host
target/mips: Fix MSA instructions LD.<B|H|W|D> on big endian host
target/mips: Make the results of MOD_<U|S>.<B|H|W|D> the same as on hardware
target/mips: Make the results of DIV_<U|S>.<B|H|W|D> the same as on hardware
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This tag contains a handful of patches that I'd like to target for 4.1:
* An emulation for SiFive's GPIO device.
* A fix to disallow sfence.vma from userspace.
* Additional decodetree cleanups that should have no functional impact.
* C extension emulation fidelity fixes that were noticed as part of that
cleanup process.
* A new "spike" target, along with the deprecation of a handful of old
targets and CPUs.
* Some initial infastructure related to the hypervisor extension.
* An emulation fidelity fix that prevents prevents arbitrary bits in the
SIP CSR from being set.
* A small performance improvement that avoids excessive TLB flushing
when the ASID does not change.
This time I've used a new testing workflow: I've tested on both 32-bit
and 64-bit builds of OpenEmbedded, via the default OpenSBI-based boot
flow.
-----BEGIN PGP SIGNATURE-----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=7LvI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.1-sf0' into staging
RISC-V Patches for the 4.1 Soft Freeze, Part 1
This tag contains a handful of patches that I'd like to target for 4.1:
* An emulation for SiFive's GPIO device.
* A fix to disallow sfence.vma from userspace.
* Additional decodetree cleanups that should have no functional impact.
* C extension emulation fidelity fixes that were noticed as part of that
cleanup process.
* A new "spike" target, along with the deprecation of a handful of old
targets and CPUs.
* Some initial infastructure related to the hypervisor extension.
* An emulation fidelity fix that prevents prevents arbitrary bits in the
SIP CSR from being set.
* A small performance improvement that avoids excessive TLB flushing
when the ASID does not change.
This time I've used a new testing workflow: I've tested on both 32-bit
and 64-bit builds of OpenEmbedded, via the default OpenSBI-based boot
flow.
# gpg: Signature made Sat 25 May 2019 01:05:57 BST
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.1-sf0: (29 commits)
target/riscv: Only flush TLB if SATP.ASID changes
target/riscv: More accurate handling of `sip` CSR
target/riscv: Add checks for several RVC reserved operands
target/riscv: Add the HGATP register masks
target/riscv: Add the HSTATUS register masks
target/riscv: Add Hypervisor CSR macros
target/riscv: Allow setting mstatus virtulisation bits
target/riscv: Add the MPV and MTL mstatus bits
target/riscv: Improve the scause logic
target/riscv: Trigger interrupt on MIP update asynchronously
target/riscv: Mark privilege level 2 as reserved
riscv: spike: Add a generic spike machine
target/riscv: Deprecate the generic no MMU CPUs
target/riscv: Add a base 32 and 64 bit CPU
target/riscv: Create settable CPU properties
riscv: virt: Allow specifying a CPU via commandline
linux-user/riscv: Add the CPU type as a comment
target/riscv: Remove unused include of riscv_htif.h for virt board riscv
target/riscv: Remove spaces from register names
target/riscv: Split gen_arith_imm into functional and temp
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Display more helpful message when an object type is missing
(Philippe Mathieu-Daudé)
* Use object_initialize_child for correct reference counting
(Philippe Mathieu-Daudé)
-----BEGIN PGP SIGNATURE-----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=m2EC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Machine Core queue, 2019-05-24
* Display more helpful message when an object type is missing
(Philippe Mathieu-Daudé)
* Use object_initialize_child for correct reference counting
(Philippe Mathieu-Daudé)
# gpg: Signature made Fri 24 May 2019 19:31:06 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
hw/intc/nvic: Use object_initialize_child for correct reference counting
hw/arm/mps2: Use object_initialize_child for correct reference counting
hw/microblaze/zynqmp: Use object_initialize_child for correct ref. counting
hw/microblaze/zynqmp: Use object_initialize_child for correct ref. counting
hw/microblaze/zynqmp: Let the SoC manage the IPI devices
hw/microblaze/zynqmp: Move the IPI state into the PMUSoC state
hw/mips: Use object_initialize_child for correct reference counting
hw/mips: Use object_initialize() on MIPSCPSState
hw/arm: Use object_initialize_child for correct reference counting
hw/arm/aspeed: Use object_initialize_child for correct ref. counting
hw/arm/bcm2835: Use object_initialize_child for correct ref. counting
hw/arm/bcm2835: Use object_initialize() on PL011State
hw/arm/bcm2835: Use TYPE_PL011 instead of hardcoded string
hw/virtio: Use object_initialize_child for correct reference counting
hw/misc/macio: Use object_initialize_child for correct ref. counting
hw/ppc/pnv: Use object_initialize_child for correct reference counting
qom/object: Display more helpful message when an object type is missing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This attempts to clean-up the output to better match the output of the
rest of the QEMU check system when called with -makecheck. This includes:
- formatting as " TEST iotest-FMT: nnn"
- only dumping config on failure (when -makecheck enabled)
The non-make check output has been cleaned up as well:
- line re-displayed (\r) at the end
- fancy colours for pass/fail/skip
- timestamps always printed (option removed)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190503143904.31211-1-alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Currently, all tests are in the "auto" group. This is a little bit pointless.
OTOH, we need a group for the tests that we can automatically run during
"make check" each time, too. Tests in this new group are supposed to run
with every possible QEMU configuration, for example they must run with every
QEMU binary (also non-x86), without failing when an optional features is
missing (but reporting "skip" is ok), and be able to run on all kind of host
filesystems and users (i.e. also as "nobody" or "root").
So let's use the "auto" group for this class of tests now. The initial
list has been determined by running the iotests with non-x86 QEMU targets
and with our CI pipelines on Gitlab, Cirrus-CI and Travis (i.e. including
macOS and FreeBSD).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190502084506.8009-7-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Add support for generating a single targets coverage report. Execute:
make coverage-report
In the target build directory. This coverage report only cares about
target specific blobs so only searches the target build subdirectory.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Commit 337f2311f actually claimed to do this in the commit log but
didn't actually. Oops.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This provides the bootstrap and low level helper functions for an
alpha kernel. We use direct access to the DP264 serial port for
test output, and hard machine halt to exit the emulation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190501184306.15208-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Expand the memory test to cover move of the softmmu code. Specifically
we:
- improve commentary
- add some helpers (for later BE support)
- reduce boiler plate into helpers
- add signed reads at various sizes/offsets
- required -DCHECK_UNALIGNED
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing inherently architecture specific about the memory
test although we may have to manage different restrictions of
unaligned access across architectures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This provides the bootstrap and low level helper functions for an
aarch64 kernel. We use semihosting to handle test output and exiting
the emulation. semihosting's parameter passing is a little funky so we
end up using the stack and pointing to that as the parameter block.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We are starting to add assembler foe tests/tcg so lets make sure we
get the mode right.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This is not really i386 only, we can have the same test for all
architectures supporting system tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We can certainly support some common tests for system emulation that
make use of our minimal defined boot.S support. It will still be up to
individual architectures to ensure they build so we provide a
MULTIARCH_TESTS variable that they can tack onto TESTS themselves.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Install optional dependencies of QEMU to get better coverage.
The following components are now enabled:
$ ./configure
...
Multipath support yes
VNC SASL support yes
RDMA support yes
PVRDMA support yes
libiscsi support yes
seccomp support yes
libpmem support yes
libudev yes
Note: The udev-devel package is provided by systemd-devel.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190504055440.20406-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Based on the ubuntu.docker file.
Used to reproduce the build failure Peter was seeing.
Others might find this useful too ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190503070241.24786-1-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Seeing as I touched it I should at least keep an eye on it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Rather than printing directly to stdout lets use our common
semihosting code. There is one minor difference in that the output
currently defaults to stderr instead of stdout however this can be
controlled by connecting semihosting to a chardev.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The is_uhi gates all semihosting calls and always returns false for
CONFIG_USER_ONLY builds. There is no reason to build and link
mips-semi for these builds so lets fix that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The documentation says the write should return the number of bytes not
written on an error (0 means everything was written). Read provides a
buffer length and the return value should be the buffer length - bytes
actually read. Remove the incorrect FIXME's and return the correct
values.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Clean-up our unimplemented bits with a proper message.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Now we have a common semihosting console interface use that for our
string output. However ARM is currently unique in also supporting
semihosting for linux-user so we need to replicate the API in
linux-user. If other architectures gain this support we can move the
file later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This cleans up a number of the block comments to fit the proper style.
While we are at it we also reference the official specification and
document what the return register value can be.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
It will be useful for a number of use-cases to be able to re-direct
output to a file like we do with serial output. This does the wiring
to allow us to treat then semihosting console like just another
character output device.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This provides two functions for handling console output that handle
the common backend behaviour for semihosting.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
There isn't much point building semihosting for platforms that don't
support it. Introduce a new symbol and enable it only for the softmmu
targets that need it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for having some more common semihosting code let's
excise the current config magic from vl.c into its own file. We shall
later add more conditionals to the build configurations so we can
avoid building this if we don't need it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This tests boot a full VM and check the serial console until
the SSH daemon is running, then start a SSH session and run
some commands.
This test can be run using:
$ avocado --show=ssh run -t arch:mips tests/acceptance/linux_ssh_mips_malta.py
ssh: Entering interactive session.
ssh: # uname -a
ssh: Linux debian-mips 3.2.0-4-4kc-malta #1 Debian 3.2.51-1 mips GNU/Linux
ssh: # lspci -d 11ab:4620
ssh: 00:00.0 Host bridge: Marvell Technology Group Ltd. GT-64120/64120A/64121A System Controller (rev 10)
ssh: # cat /sys/bus/i2c/devices/i2c-0/name
ssh: SMBus PIIX4 adapter at 1100
ssh: # cat /proc/mtd
ssh: dev: size erasesize name
ssh: mtd0: 00100000 00010000 "YAMON"
ssh: mtd1: 002e0000 00010000 "User FS"
ssh: mtd2: 00020000 00010000 "Board Config"
ssh: # md5sum /dev/mtd2ro
ssh: 0dfbe8aa4c20b52e1b8bf3cb6cbdf193 /dev/mtd2ro
ssh: # poweroff
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190523161832.22490-5-f4bug@amsat.org>
Realign comments to fix warnings issued by checkpatc.pl tool
"WARNING: Block comments use a leading /* on a separate line"
within "target/mips/cpu.h" file.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190413202818.13622-3-jbi.octave@gmail.com>
Add or remove space to fix errors issued by checkpatch.pl tool
"ERROR: spaces required around that..."
"ERROR: space required after that..."
"ERROR: space required before the open parenthesis"
"ERROR: space required after that..."
"ERROR: space prohibited between function name and open parenthesis"
"ERROR: code indent should never use tabs"
"ERROR: line over 90 characters"
within "target/mips/cpu.h" file.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190413202818.13622-2-jbi.octave@gmail.com>
In current code, __NR_msgrcv and__NR_semtimedop are supposed to be
defined if __NR_msgsnd is defined.
But linux headers 5.2-rc1 for MIPS define __NR_msgsnd without defining
__NR_semtimedop and it breaks the QEMU build.
__NR_semtimedop is defined in asm-mips/unistd_n64.h and asm-mips/unistd_n32.h
but not in asm-mips/unistd_o32.h.
Commit d9cb433615 ("linux headers: update against Linux 5.2-rc1") has
updated asm-mips/unistd_o32.h and added __NR_msgsnd but not __NR_semtimedop.
It introduces __NR_semtimedop_time64 instead.
This patch fixes the problem by checking for each __NR_XXX symbol
before defining the corresponding syscall.
Fixes: d9cb433615 ("linux headers: update against Linux 5.2-rc1")
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190523175413.14448-1-laurent@vivier.eu>
This commit addresses QEMU Bug #1825311:
mips_cpu_handle_mmu_fault renders all accessed pages executable
It allows finer-grained control over whether the accessed page should
be executable by moving the decision to the underlying map_address
function, which has more information for this.
As a result, pages that have the XI bit set in the TLB and are accessed
for read/write, don't suddenly end up being executable.
Fixes: https://bugs.launchpad.net/qemu/+bug/1825311
Fixes: 2fb58b7374 ('target-mips: add RI and XI fields to TLB entry')
Signed-off-by: Jakub Jermář <jakub.jermar@kernkonzept.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190517123533.868479-1-jakub.jermar@kernkonzept.com>
The old version of the helper for the INSERT.<B|H|W|D> MSA instructions
has been replaced with four helpers that don't use switch, and change
the endianness of the given index, when executed on a big endian host.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-6-git-send-email-mateja.marjanovic@rt-rk.com>
The old version of the helper for the COPY_U.<B|H|W> MSA instructions
has been replaced with four helpers that don't use switch, and change
the endianness of the given index, when executed on a big endian host.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-5-git-send-email-mateja.marjanovic@rt-rk.com>
The old version of the helper for the COPY_S.<B|H|W|D> MSA instructions
has been replaced with four helpers that don't use switch, and change
the endianness of the given index, when executed on a big endian host.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-4-git-send-email-mateja.marjanovic@rt-rk.com>
Fix the case when the host is a big endian machine, and change
the approach toward ST.<B|H|W|D> instruction helpers.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-3-git-send-email-mateja.marjanovic@rt-rk.com>
Fix the case when the host is a big endian machine, and change
the approach toward LD.<B|H|W|D> instruction helpers.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554212605-16457-2-git-send-email-mateja.marjanovic@rt-rk.com>
MSA instructions MOD_<U|S>.<B|H|W|D> when dividing by zero,
didn't return the same value when executed on a referent hardware
(FPGA MIPS 64 r6, little endian) and when executed on QEMU, which
is not a real bug, because the result when dividing by zero is
UNPREDICTABLE [1] (page 255, 256).
[1] MIPS Architecture for Programmers
Volume IV-j: The MIPS64 SIMD
Architecture Module, Revision 1.12
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1554207110-9113-3-git-send-email-mateja.marjanovic@rt-rk.com>
