We change the restoration priority of both the GICv3 and ITS. The
GICv3 must be restored before the ITS and the ITS needs to be restored
before PCIe devices since it translates their MSI transactions.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 1497023553-18411-5-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the flush of the LPI pending bits into the
redistributor pending tables. This happens on VM stop.
There is no explicit restore as the tables are implicitly sync'ed
on ITS table restore and on LPI enable at redistributor level.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1497023553-18411-4-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to handle both registers and ITS tables. While
register handling is standard, ITS table handling is more
challenging since the kernel API is devised so that the
tables are flushed into guest RAM and not in vmstate buffers.
Flushing the ITS tables on device pre_save() is too late
since the guest RAM is already saved at this point.
Table flushing needs to happen when we are sure the vcpus
are stopped and before the last dirty page saving. The
right point is RUN_STATE_FINISH_MIGRATE but sometimes the
VM gets stopped before migration launch so let's simply
flush the tables each time the VM gets stopped.
For regular ITS registers we just can use vmstate pre_save()
and post_load() callbacks.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1497023553-18411-3-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In some circumstances, we don't want to abort if the
kvm_device_access fails. This will be the case during ITS
migration, in case the ITS table save/restore fails because
the guest did not program the vITS correctly. So let's pass an
error object to the function and return the ioctl value. New
callers will be able to make a decision upon this returned
value.
Existing callers pass &error_abort which will cause the
function to abort on failure.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 1497023553-18411-2-git-send-email-eric.auger@redhat.com
[PMM: wrapped long line]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a timer is enabled before a reload value is set, the controller
waits for a reload value to be set before starting decrementing. This
fix tries to cover that case by changing the timer expiry only when
a reload value is valid.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1496739312-32304-1-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Temperatures can be changed from the monitor with :
(qemu) qom-set /machine/unattached/device[2] temperature0 12000
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1496739230-32109-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Largely inspired by the TMP105 temperature sensor, here is a model for
the TMP42{1,2,3} temperature sensors.
Specs can be found here :
http://www.ti.com/lit/gpn/tmp421
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1496739230-32109-2-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
On all Exynos-based boards, the system powers down itself by driving
PS_HOLD signal low - eight bit in PS_HOLD_CONTROL register of PMU.
Handle writing to respective PMU register to fix power off failure:
reboot: Power down
Unable to poweroff system
shutdown: 31 output lines suppressed due to ratelimiting
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
CPU: 0 PID: 1 Comm: shutdown Not tainted 4.11.0-rc8 #846
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c031050c>] (unwind_backtrace) from [<c030ba6c>] (show_stack+0x10/0x14)
[<c030ba6c>] (show_stack) from [<c05b2800>] (dump_stack+0x88/0x9c)
[<c05b2800>] (dump_stack) from [<c03d3140>] (panic+0xdc/0x268)
[<c03d3140>] (panic) from [<c0343614>] (do_exit+0xa90/0xab4)
[<c0343614>] (do_exit) from [<c035f2dc>] (SyS_reboot+0x164/0x1d0)
[<c035f2dc>] (SyS_reboot) from [<c0307c80>] (ret_fast_syscall+0x0/0x3c)
Additionally the initial value of PS_HOLD has to be changed because
recent Linux kernel (v4.12-rc1) uses regmap cache for this access.
When the register is kept at reset value, the kernel will not issue a
write to it. Usually the bootloader sets the eight bit of PS_HOLD high
so mimic its existence here.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The static array of interrupt combiner mappings is not modified so it
can be made const for code safeness.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use a define for a9mpcore_priv device type name instead of hard-coded
string.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bring some more readability by declaring local function variables: first
initialized ones and then the rest (with reversed-christmas-tree order).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before QOM-ifying the Exynos4 SoC model, move the DRAM initialization
from exynos4210.c to exynos4_boards.c because DRAM is board specific,
not SoC.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove defines not used anywhere.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Statements under 'case' were in some places wrongly indented bringing
confusion and making the code less readable. Remove also few unneeded
blank lines. No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix checkpatch errors:
1. ERROR: spaces required around that '+' (ctx:VxV)
2. ERROR: spaces required around that '&' (ctx:VxV)
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are to SysBusDevice variables in exynos4210_gic_realize()
function: one for the device itself and second for arm_gic device. Add
a prefix "gic" to the second one so it will be easier to understand the
code.
While at it, put local uninitialized 'i' variable at the end, next to
other uninitialized ones.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This batch contains more patches to rework the pseries machine hotplug
infrastructure, plus an assorted batch of bugfixes.
It contains a start on fixes to restore migration from older machine
types on older versions which was broken by some xics changes. There
are still a few missing pieces here, though.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=a4tH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170609' into staging
ppc patch queue 2017-06-09
This batch contains more patches to rework the pseries machine hotplug
infrastructure, plus an assorted batch of bugfixes.
It contains a start on fixes to restore migration from older machine
types on older versions which was broken by some xics changes. There
are still a few missing pieces here, though.
# gpg: Signature made Fri 09 Jun 2017 06:26:03 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170609:
Revert "spapr: fix memory hot-unplugging"
xics: drop ICPStateClass::cpu_setup() handler
xics: setup cpu at realize time
xics: pass appropriate types to realize() handlers.
xics: introduce macros for ICP/ICS link properties
hw/cpu: core.c can be compiled as common object
hw/ppc/spapr: Adjust firmware name for PCI bridges
xics: add reset() handler to ICPStateClass
pnv_core: drop reference on ICPState object during CPU realization
spapr: Rework DRC name handling
spapr: Fold spapr_phb_{add,remove}_pci_device() into their only callers
spapr: Change DRC attach & detach methods to functions
spapr: Clean up handling of DR-indicator
spapr: Clean up RTAS set-indicator
spapr: Don't misuse DR-indicator in spapr_recover_pending_dimm_state()
spapr: Clean up DR entity sense handling
pseries: Correct panic behaviour for pseries machine type
spapr: fix memory leak in spapr_memory_pre_plug()
target/ppc: fix memory leak in kvmppc_is_mem_backend_page_size_ok()
target/ppc: pass const string to kvmppc_is_mem_backend_page_size_ok()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Can happen with usb-storage devices: ehci_work_bh calls usb-storage,
usb-storage calls into block layer, block layer may run BHs.
Add a simple bool and just do nothing in case we figure ehci_work_bh is
active.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170612073109.25930-1-kraxel@redhat.com
Some fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZOZ+4AAoJECgfDbjSjVRpToYH/1vHgbv2dLtZTJm3BdBRKYWS
9oWt4drT9TdbzYL6u3zxQd6oT0FPLXKkx3ruhBtfc3GoEGO2UWGgJLEXWCLSH/pK
71iKgCB9Yr4IErjI569/fyeKS48wFEsZihzj+iQBns7gQGTbUO/GewaWV8q6CRzC
nKY8g9Z1ajH/eufgV6iSitnReAoaere4kod/5Qa5R0i/JvEx010Pe6kjQT1TYCcB
GhSe0hSIInqOYWkMt8v+2LQlAGXdopjmjcaYD/b1/IVKu2xdVPRvXNYmW9CBbMrx
xVWXQ8pNzjrJdfJZTZhAW/lkhx+AlG4KIAzOnMslTYuZ8E84ioafkmumNFPHrBw=
=TjdI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, vhost: fixes
Some fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 08 Jun 2017 20:04:24 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
hw/pcie: fix the generic pcie root port to support migration
nvdimm acpi: fix region format interface code
vhost-user-bridge: fix iov_restore_front() warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It don't belong anywhere else, just the global state where everybody
can stick other things.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
They are indpendent, and nowadays almost every device register things
with qdev->vmsd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
The dequeue pointer should only be updated in case the transfer
is actually completed. If we update it for inflight transfers
we will not pick them up again after migration, which easily
triggers with HID devices as they typically have a pending
transfer, waiting for user input to happen.
Fixes: 243afe858b
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451631
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 20170608074122.32099-1-kraxel@redhat.com
This reverts commit fe6824d126.
Conflicts hw/ppc/spapr_drc.c, because get_index() has been renamed
spapr_get_index().
This didn't fix the problem. Once the hotplug has been started
some memory is allocated and some structures are allocated.
We don't free it when we ignore the unplug, and we can't because
they can be in use by the kernel.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The cpu_setup() handler is only implemented by xics_kvm, where it really
does a typical "realize" job. Moreover, the realize() handler is called
shortly after cpu_setup(), on the same path.
This patch converts xics_kvm to implement realize() instead of cpu_setup().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Until recently, spapr used to allocate ICPState objects for the lifetime
of the machine. They would only be associated to vCPUs in xics_cpu_setup()
when plugging a CPU core.
Now that ICPState objects have the same lifecycle as vCPUs, it is
possible to associate them during realization.
This patch hence open-codes xics_cpu_setup() in icp_realize(). The vCPU
is passed as a property. Note that vCPU now needs to be realized first
for the IRQs to be allocated. It also needs to resetted before ICPState
realization in order to synchronize with KVM.
Since ICPState objects are freed when unrealized, xics_cpu_destroy() isn't
needed anymore and can be safely dropped.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It makes more sense to pass an IPCState * to handlers of ICPStateClass
instead of a DeviceState *, if only to benefit from compile time type
checking. The same goes with ICSStateClass.
While here, we also change the declaration of ICPStateClass in xics.h
for consistency.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These properties are part of the XICS API. They deserve to appear
explicitely in the XICS header file.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There does not seem to be any target specific code in core.c, so we can
put it into "common-obj" instead of "obj" to compile it only once for
all targets.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add msix state to pcie-root-ports's vmstate
in order to support migration.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per ACPI 6.2, section 5.2.25.6 and JEDEC Annex L Release 3, the
current region format interface code 0x201 indicates the block
addressed function interface 1, rather than a byte addressable
interface. Fix it by using 0x301 which indicates the byte addressable
no energy backed function interface 1.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
SLOF uses "pci" as name for PCI bridges nodes in the device tree instead
of "pci-bridges", so booting via bootindex from a device behind a PCI
bridge currently does not work since QEMU passes the wrong name in the
"qemu,boot-list" property. Fix it by changing the name of the PCI bridge
nodes to "pci" instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1459170
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Taking into account that qemu_set_irq() returns immediatly if its first
argument is NULL, icp_kvm_reset() largely duplicates icp_reset().
This patch introduces a reset() handler, so that the common logic can
be implemented in icp_reset() only.
While there we can also drop icp_kvm_realize() and icp_kvm_unrealize(). This
causes icp-kvm to be realized in icp_realize(), which sets icp->xics, but
it has no impact.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Similarly to what was done to spapr with commit 249127d0df, this patch
ensures that we don't keep an extra reference on the ICPState object. Also
since the object was just created and not reparented yet, the call to
object_property_add_child() should never fail: let's pass &error_abort to
make this clear.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
DRC objects have a get_name method which returns the DRC name generated
when the DRC is created. Replace that with a fixed spapr_drc_name()
function which generates the name on the fly from other information. This
means:
* We get rid of a method with only one implementation, and only local
callers
* We don't have to carry the name string around for the lifetime of the
DRC
* We use information added to the class structure to generate the name
in standard format, so we don't need an explicit switch on drc type
any more
We also eliminate the 'name' property; it's basically useless since the
only information in it can easily be deduced from other things.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Both functions are fairly short, and so are their callers. There's no
particular logical distinction between them, so fold them together.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
DRC objects have attach & detach methods, but there's only one
implementation. Although there are some differences in its behaviour for
different DRC types, the overall structure is the same, so while we might
want different method implementations for some parts, we're unlikely to
want them for the top-level functions.
So, replace them with direct function calls.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
There are 3 types of "indicator" associated with hotplug in the PAPR spec
the "allocation state", "isolation state" and "DR-indicator". The first
two are intimately tied to the various state transitions associated with
hotplug. The DR-indicator, however, is different and simpler.
It's basically just a guest controlled variable which can be used by the
guest to flag state or problems associated with a device. The idea is that
the hypervisor can use it to present information back on management
consoles (on some machines with PowerVM it may even control physical LEDs
on the machine case associated with the relevant device).
For that reason, there's only ever likely to be a single update
implementation so the set_indicator_state method isn't useful. Replace it
with a direct function call.
While we're there, make some small associated cleanups:
* PAPR doesn't use the term "indicator state", just "DR-indicator" and
the allocation state and isolation state are also considered "indicators".
Rename things to be less confusing
* Fold set_indicator_state() and rtas_set_indicator_state() into a single
rtas_set_dr_indicator() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In theory the RTAS set-indicator call can be used for a number of
"indicators" defined by PAPR. In practice the only ones we're ever likely
to implement are those used for Dynamic Reconfiguration (i.e. hotplug).
Because of this, the current implementation determines the associated DRC
object, before dispatching based on the type of indicator.
However, this means we also need a check that we're dealing with a DR
related indicator at all, which duplicates some of the logic from the
switch further down.
Even though it means a bit of code duplication, things work out cleaner if
we delegate the DRC lookup to the individual indicator type functions -
and it also allows some further cleanups.
While we're there, remove references to "sensor", a copy/paste artefact
from the related, but distinct "get-sensor" call.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
With some combinations of migration and hotplug we can lost temporary state
indicating how many DRCs (guest side hotplug handles) are still connected
to a DIMM object in the process of removal. When we hit that situation
spapr_recover_pending_dimm_state() is used to scan more extensively and
work out the right number.
It does this using drc->indicator state to determine what state of
disconnection the DRC is in. However, this is not safe, because the
indicator state is guest settable - in fact it's more-or-less a purely
guest->host notification mechanism which should have no bearing on the
internals of hotplug state management.
So, replace the test for this with a test on drc->dev, which is a purely
qemu side managed variable, and updated the same BQL critical section as
the indicator state.
This does introduce an off-by-one change, because the indicator state was
updated before the call to spapr_lmb_release() on the current DRC, whereas
drc->dev is updated afterwards. That's corrected by always decrementing
the nr_lmbs value instead of only doing so in the case where we didn't
have to recover information.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
DRC classes have an entity_sense method to determine (in a specific PAPR
sense) the presence or absence of a device plugged into a DRC. However,
we only have one implementation of the method, which explicitly tests for
different DRC types. This changes it to instead have different method
implementations for the two cases: "logical" and "physical" DRCs.
While we're at it, the entity sense method always returns RTAS_OUT_SUCCESS,
and the interesting value is returned via pass-by-reference. Simplify this
to directly return the value we care about
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The pseries machine type doesn't usually use the 'pvpanic' device as such,
because it has a firmware/hypervisor facility with roughly the same
purpose. The 'ibm,os-term' RTAS call notifies the hypervisor that the
guest has crashed.
Our implementation of this call was sending a GUEST_PANICKED qmp event;
however, it was not doing the other usual panic actions, making its
behaviour different from pvpanic for no good reason.
To correct this, we should call qemu_system_guest_panicked() rather than
directly sending the panic event.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The string returned by object_property_get_str() is dynamically allocated.
(Spotted by Coverity, CID 1375942)
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If msi_init fails, the thread has already been created and the
mutex/condvar are not destroyed. Initialize everything only
after the point where pci_edu_realize cannot fail.
Reported-by: Markus Armbruster <armbru@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do an update of system_time_msr address every time before reading
the value of tsc_timestamp from guest's kvmclock page.
There is no other code paths which ensure that qemu has an up-to-date
value of system_time_msr. So, force this update on guest's tsc_timestamp
reading.
This bug causes effect on those nested setups which turn off TPR access
interception for L2 guests and that access being intercepted by L0 doesn't
show up in L1.
Linux bootstrap initiate kvmclock before APIC initializing causing TPR access.
That's why on L1 guests, having TPR interception turned on for L2, the effect
of the bug is not revealed.
This patch fixes this problem by making sure it knows the correct
system_time_msr address every time it is needed.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <1496054944-25623-1-git-send-email-dplotnikov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
