Fix memory leak in colo-compare.c and filter-rewriter.c
Report by Coverity and add some comments.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.
The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All the queues share the same chardev. Initialize only the first queue
CharBackend, and pass it to other queues. This will allow to claim the
chardev only once in a later change.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-18-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This factors out claiming of chardev, and changes the call to
non-fatal to return an error like the rest of the chardev checks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-15-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_chr_accept_input() and qemu_chr_disconnect() are only used by
frontend, so use qemu_chr_fe prefix.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-14-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to previous change, for the remaining CharDriverState front ends
users.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CharDriverState.init() callback is no longer set since commit
a61ae7f88c and thus unused. The only user, the malta FGPA display has
been converted to use an event "opened" callback instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The colo patch series added various trace events to the top
level trace-events file, despite the files using them being
in a sub-dir.
commit 30656b097e
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:34 2016 +0800
filter-rewriter: rewrite tcp packet to keep secondary connection
commit f4b618360e
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:31 2016 +0800
colo-compare: add TCP, UDP, ICMP packet comparison
We add TCP,UDP,ICMP packet comparison to replace
IP packet comparison. This can increase the
accuracy of the package comparison.
Less checkpoint more efficiency.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
commit 0682e15b19
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:30 2016 +0800
colo-compare: introduce packet comparison thread
commit 59509ec16b
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:27 2016 +0800
net/colo.c: add colo.c to define and handle packet
This moves all events into net/trace-events where they
were supposed to live.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The vhost-user & colo code is poking at the QemuOpts instance
in the CharDriverState struct, not realizing that it is valid
for this to be NULL. e.g. the following crash shows a codepath
where it will be NULL:
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
617 QTAILQ_FOREACH(opt, &opts->head, next) {
[Current thread is 1 (Thread 0x7f1d4970bb40 (LWP 6603))]
(gdb) bt
#0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
#1 0x000055baf696b7da in net_vhost_parse_chardev (opts=0x55baf8ff9260, errp=0x7ffc51368e48) at net/vhost-user.c:314
#2 0x000055baf696b985 in net_init_vhost_user (netdev=0x55baf8ff9250, name=0x55baf879d270 "hostnet2", peer=0x0, errp=0x7ffc51368e48) at net/vhost-user.c:360
#3 0x000055baf6960216 in net_client_init1 (object=0x55baf8ff9250, is_netdev=true, errp=0x7ffc51368e48) at net/net.c:1051
#4 0x000055baf6960518 in net_client_init (opts=0x55baf776e7e0, is_netdev=true, errp=0x7ffc51368f00) at net/net.c:1108
#5 0x000055baf696083f in netdev_add (opts=0x55baf776e7e0, errp=0x7ffc51368f00) at net/net.c:1186
#6 0x000055baf69608c7 in qmp_netdev_add (qdict=0x55baf7afaf60, ret=0x7ffc51368f50, errp=0x7ffc51368f48) at net/net.c:1205
#7 0x000055baf6622135 in handle_qmp_command (parser=0x55baf77fb590, tokens=0x7f1d24011960) at /path/to/qemu.git/monitor.c:3978
#8 0x000055baf6a9d099 in json_message_process_token (lexer=0x55baf77fb598, input=0x55baf75acd20, type=JSON_RCURLY, x=113, y=19) at qobject/json-streamer.c:105
#9 0x000055baf6abf7aa in json_lexer_feed_char (lexer=0x55baf77fb598, ch=125 '}', flush=false) at qobject/json-lexer.c:319
#10 0x000055baf6abf8f2 in json_lexer_feed (lexer=0x55baf77fb598, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-lexer.c:369
#11 0x000055baf6a9d13c in json_message_parser_feed (parser=0x55baf77fb590, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-streamer.c:124
#12 0x000055baf66221f7 in monitor_qmp_read (opaque=0x55baf77fb530, buf=0x7ffc51369170 "}R\204\367\272U", size=1) at /path/to/qemu.git/monitor.c:3994
#13 0x000055baf6757014 in qemu_chr_be_write_impl (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:387
#14 0x000055baf6757076 in qemu_chr_be_write (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:399
#15 0x000055baf675b3b0 in tcp_chr_read (chan=0x55baf90244b0, cond=G_IO_IN, opaque=0x55baf7610a40) at qemu-char.c:2927
#16 0x000055baf6a5d655 in qio_channel_fd_source_dispatch (source=0x55baf7610df0, callback=0x55baf675b25a <tcp_chr_read>, user_data=0x55baf7610a40) at io/channel-watch.c:84
#17 0x00007f1d3e80cbbd in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#18 0x000055baf69d3720 in glib_pollfds_poll () at main-loop.c:213
#19 0x000055baf69d37fd in os_host_main_loop_wait (timeout=126000000) at main-loop.c:258
#20 0x000055baf69d38ad in main_loop_wait (nonblocking=0) at main-loop.c:506
#21 0x000055baf676587b in main_loop () at vl.c:1908
#22 0x000055baf676d3bf in main (argc=101, argv=0x7ffc5136a6c8, envp=0x7ffc5136a9f8) at vl.c:4604
(gdb) p opts
$1 = (QemuOpts *) 0x0
The crash occurred when attaching vhost-user net via QMP:
{
"execute": "chardev-add",
"arguments": {
"id": "charnet2",
"backend": {
"type": "socket",
"data": {
"addr": {
"type": "unix",
"data": {
"path": "/var/run/openvswitch/vhost-user1"
}
},
"wait": false,
"server": false
}
}
},
"id": "libvirt-19"
}
{
"return": {
},
"id": "libvirt-19"
}
{
"execute": "netdev_add",
"arguments": {
"type": "vhost-user",
"chardev": "charnet2",
"id": "hostnet2"
},
"id": "libvirt-20"
}
Code using chardevs should not be poking at the internals of the
CharDriverState struct. What vhost-user wants is a chardev that is
operating as reconnectable network service, along with the ability
to do FD passing over the connection. The colo code simply wants
a network service. Add a feature concept to the char drivers so
that chardev users can query the actual features they wish to have
supported. The QemuOpts member is removed to prevent future mistakes
in this area.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
we only need to allocate enough memory to hold the packet. This might be
less than NET_BUFSIZE. Additionally fail early if the packet is larger
than NET_BUFSIZE.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The tap backend is already using qemu-bridge-helper to attach tap
interface to a bridge but (unlike the bridge backend) it always uses
the default bridge name - br0.
This adds a "br" property support to the tap backend.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We will rewrite tcp packet secondary received and sent.
When colo guest is a tcp server.
Firstly, client start a tcp handshake. the packet's seq=client_seq,
ack=0,flag=SYN. COLO primary guest get this pkt and mirror(filter-mirror)
to secondary guest, secondary get it use filter-redirector.
Then,primary guest response pkt
(seq=primary_seq,ack=client_seq+1,flag=ACK|SYN).
secondary guest response pkt
(seq=secondary_seq,ack=client_seq+1,flag=ACK|SYN).
In here,we use filter-rewriter save the secondary_seq to it's tcp connection.
Finally handshake,client send pkt
(seq=client_seq+1,ack=primary_seq+1,flag=ACK).
Here,filter-rewriter can get primary_seq, and rewrite ack from primary_seq+1
to secondary_seq+1, recalculate checksum. So the secondary tcp connection
kept good.
When we send/recv packet.
client send pkt(seq=client_seq+1+data_len,ack=primary_seq+1,flag=ACK|PSH).
filter-rewriter rewrite ack and send to secondary guest.
primary guest response pkt
(seq=primary_seq+1,ack=client_seq+1+data_len,flag=ACK)
secondary guest response pkt
(seq=secondary_seq+1,ack=client_seq+1+data_len,flag=ACK)
we rewrite secondary guest seq from secondary_seq+1 to primary_seq+1.
So tcp connection kept good.
In code We use offset( = secondary_seq - primary_seq )
to rewrite seq or ack.
handle_primary_tcp_pkt: tcp_pkt->th_ack += offset;
handle_secondary_tcp_pkt: tcp_pkt->th_seq -= offset;
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We use net/colo.h to track connection and parse packet
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter-rewriter is a part of COLO project.
It will rewrite some of secondary packet to make
secondary guest's tcp connection established successfully.
In this module we will rewrite tcp packet's ack to the secondary
from primary,and rewrite tcp packet's seq to the primary from
secondary.
usage:
colo secondary:
-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
-object filter-rewriter,id=rew0,netdev=hn0,queue=all
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add TCP,UDP,ICMP packet comparison to replace
IP packet comparison. This can increase the
accuracy of the package comparison.
Less checkpoint more efficiency.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If primary packet is same with secondary packet,
we will send primary packet and drop secondary
packet, otherwise notify COLO frame to do checkpoint.
If primary packet comes but secondary packet does not,
after REGULAR_PACKET_CHECK_MS milliseconds we set
the primary packet as old_packet,then do a checkpoint.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Jhash will be used by colo-compare and filter-rewriter
to save and lookup net connection info
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The net/colo.c is used by colo-compare and filter-rewriter.
this can share common data structure like net packet,
and other functions.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Upon hmp_host_net_remove(), the appropriate -net client is deleted
(according to the given vlan_id and device id), as well as the
corresponsing hub port.
However, the relevant '-net' option that was added by former
hmp_host_net_add() call is still present in "net" options group.
This makes the following legit HMP sequence erroneous:
(qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1
(qemu) host_net_remove 1 n1
(qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1
Duplicate ID 'n1' for net
Fix, by deleting the stored '-net' option associated with the given
device id.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use socket_*() functions from include/qemu/sockets.h instead of
listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are
QAPI based and this patch performs this api conversion since
everything will be using QAPI based sockets in the future. Also add a
helper function socket_address_to_string() in util/qemu-sockets.c
which returns the string representation of socket address. The task was
listed on http://wiki.qemu.org/BiteSizedTasks page.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
instead of accessing tqe_prev field dircetly outside
of queue.h use macros to check if element is in list
and make sure that afer element is removed from list
tqe_prev field could be used to do the same check.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469450832-84343-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 7e8449594c, the socket connect code is blocking, because
calling socket_connect() without callback is blocking. This reverts the
commit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit f6c2e66ae8, slirp uses an exit notifier to call
slirp_smb_cleanup. However, if init() failed, the notifier isn't added,
and removing it will fail:
==18447== Invalid write of size 8
==18447== at 0x7EF2B5: notifier_remove (notify.c:32)
==18447== by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661)
==18447== by 0x6A2187: net_slirp_cleanup (slirp.c:134)
==18447== by 0x69419D: qemu_cleanup_net_client (net.c:338)
==18447== by 0x69445B: qemu_del_net_client (net.c:401)
==18447== by 0x6A2B81: net_slirp_init (slirp.c:366)
==18447== by 0x6A4241: net_init_slirp (slirp.c:865)
==18447== by 0x695C6D: net_client_init1 (net.c:1051)
==18447== by 0x695F6E: net_client_init (net.c:1108)
==18447== by 0x696DBA: net_init_netdev (net.c:1498)
==18447== by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116)
==18447== by 0x696E60: net_init_clients (net.c:1516)
==18447== Address 0x0 is not stack'd, malloc'd or (recently) free'd
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When network is busy, we will receive multiple packets at one time. In
that situation, we should keep trying to do the receiving instead of
finalizing only the first packet.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The chardev waits for an initial connection before starting qemu, and
vhost-user should wait for the backend negotiation to be completed
before starting qemu too.
vhost-user is started in the net_vhost_user_event callback, which is
synchronously called after the socket is connected. Use a
VhostUserState.started flag to indicate vhost-user init completed
successfully and qemu can be started.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a few assertions to be more explicit about the runtime behaviour
after the previous patch: get_vhost_net() is non-null after
net_vhost_user_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Many code paths assume get_vhost_net() returns non-null.
Keep VhostUserState.vhost_net after a successful vhost_net_init(),
instead of freeing it in vhost_net_cleanup().
VhostUserState.vhost_net is thus freed before after being recreated or
on final vhost_user_cleanup() and there is no need to save the acked
features.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In some cases, qemu_chr_fe_read_all() on HUP event doesn't raise
CHR_EVENT_CLOSED because the read/recv function returns -1 on
disconnected peers (for example with tch_chr_recv, an ECONNRESET errno
overwritten as EIO).
It is simpler to explicitely disconnect on HUP, rising CHR_EVENT_CLOSED
if it wasn't disconnected already.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Shorten the code and make it more clear by using the specialized
function g_str_has_prefix().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MhfL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-07-19' into staging
QAPI patches for 2016-07-19
# gpg: Signature made Tue 19 Jul 2016 19:35:27 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2016-07-19:
net: Use correct type for bool flag
qapi: Change Netdev into a flat union
block: Simplify drive-mirror
block: Simplify block_set_io_throttle
qapi: Implement boxed types for commands/events
qapi: Plumb in 'boxed' to qapi generator lower levels
qapi-event: Simplify visit of non-implicit data
qapi: Drop useless gen_err_check()
qapi: Add type.is_empty() helper
qapi: Hide tag_name data member of variants
qapi: Special case c_name() for empty type
qapi: Require all branches of flat union enum to be covered
net: use Netdev instead of NetClientOptions in client init
qapi: change QmpInputVisitor to QSLIST
qapi: change QmpOutputVisitor to QSLIST
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
is_netdev is only used as a bool, so make it one.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-14-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is a mostly-mechanical conversion that creates a new flat
union 'Netdev' QAPI type that covers all the branches of the
former 'NetClientOptions' simple union, where the branches are
now listed in a new 'NetClientDriver' enum rather than generated
from the simple union. The existence of a flat union has no
change to the command line syntax accepted for new code, and
will make it possible for a future patch to switch the QMP
command to parse a boxed union for no change to valid QMP; but
it does have some ripple effect on the C code when dealing with
the new types.
While making the conversion, note that the 'NetLegacy' type
remains unchanged: it applies only to legacy command line options,
and will not be ported to QMP, so it should remain a wrapper
around a simple union; to avoid confusion, the type named
'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions'
in its place. Then, in the C code, we convert from NetLegacy to
Netdev as soon as possible, so that the bulk of the net stack
only has to deal with one QAPI type, not two. Note that since
the old legacy code always rejected 'hubport', we can just omit
that branch from the new 'NetLegacyOptions' simple union.
Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>:
Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com>
although the sed script in that patch no longer applies due to
other changes in the tree since then, and I also did some manual
cleanups (such as fixing whitespace to keep checkpatch happy).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Fixup from Eric squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This way we no longer need NetClientOptions and can convert Netdev
into a flat union.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <93ffdfed7054529635e6acb935150d95dc173a12.1441627176.git.DirtY.iCE.hu@gmail.com>
[rework net_client_init1() to pass Netdev by copying from NetdevLegacy,
rather than merging the two types - which means that we still need
NetClientOptions after all. Rebase to qapi changes. The bulk of the
patch is mechanical, replacing 'opts' by 'netdev->opts', while
net_client_init1() takes care of converting between legacy and modern
types.]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-2-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Coverity reports a "suspicious sizeof" which is indeed wrong.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is not dereferencing the pointer, and instead checking only
the value of the pointer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXhiZDAAoJEL/70l94x66DrGAH/10ZlIYugx6Ijn12qy3irmIC
hbMY6HWjvPlk8ZpAcPa3UXNQvqhTwqhSMXRiwp9aNPlRUqrXnDXZapQunJveKSAn
luLE8ISRKODz0W39qg6znyb4R1ipCGJWwjBCQmLWZuD7883JJ2DsykTATRx7yKQF
qsq9r/DPBTfD3vnOCTbqp0GeB80UFleTNm+K7cct8M1+WzfiwKeVHk9CAKy0fkTH
hS+YnV9UWYL6PR/w+uZ+2MfgH5er4X794+HaNbio0QJJbEZ2bsL4A3Prh7pUonN7
qJoCbT4W79scrnWQ40RbWRXOMfUk4J7gIMEZYar8z6NmqnamNZgxbWj3dv6pO+k=
=sz/L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* SCSI scanner support
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes
# gpg: Signature made Wed 13 Jul 2016 12:30:11 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
hostmem: detect host backend memory is being used properly
hostmem: fix QEMU crash by 'info memdev'
char: do not use atexit cleanup handler
net: do not use atexit for cleanup
slirp: use exit notifier for slirp_smb_cleanup
tap: use an exit notifier to call down_script
util: Fix MIN_NON_ZERO
qemu-sockets: use qapi_free_SocketAddress in cleanup
disas: avoid including everything in headers compiled from C++
json-streamer: fix double-free on exiting during a parse
main-loop: check return value before using pointer
Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD.
scsi-bus: Use longer sense buffer with scanners
scsi-bus: Add SCSI scanner support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We would like to move back net_cleanup() at the end of main function,
like it used to be until f30dbae63a, but minimum
cleanup is needed regardless at exit() time for slirp's SMB
functionality. Use an exit notifier to call slirp_smb_cleanup.
If net_cleanup() is called first, then remove the exit notifier as it
will become a dangling pointer otherwise.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We would like to move back net_cleanup() at the end of main function,
like it used to be until f30dbae63a, but minimum
tap cleanup is necessary regarless at exit() time. Use an exit notifier
to call TAP down_script. If net_cleanup() is called first, then remove
the exit notifier as it will become a dangling pointer otherwise.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20160711144847.16651-1-marcandre.lureau@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely. Offenders found with
scripts/clean-header-guards.pl -vn.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This patch add the capability of basic vhost net busy polling which is
supported by recent kernel. User could configure the maximum number of
us that could be spent on busy polling through a new property of tap
"poll-us".
Cc: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Making each output visitor provide its own output collection
function was the only remaining reason for exposing visitor
sub-types to the rest of the code base. Add a polymorphic
visit_complete() function which is a no-op for input visitors,
and which populates an opaque pointer for output visitors. For
maximum type-safety, also add a parameter to the output visitor
constructors with a type-correct version of the output pointer,
and assert that the two uses match.
This approach was considered superior to either passing the
output parameter only during construction (action at a distance
during visit_free() feels awkward) or only during visit_complete()
(defeating type safety makes it easier to use incorrectly).
Most callers were function-local, and therefore a mechanical
conversion; the testsuite was a bit trickier, but the previous
cleanup patch minimized the churn here.
The visit_complete() function may be called at most once; doing
so lets us use transfer semantics rather than duplication or
ref-count semantics to get the just-built output back to the
caller, even though it means our behavior is not idempotent.
Generated code is simplified as follows for events:
|@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP
| QDict *qmp;
| Error *err = NULL;
| QMPEventFuncEmit emit;
|- QmpOutputVisitor *qov;
|+ QObject *obj;
| Visitor *v;
| q_obj_ACPI_DEVICE_OST_arg param = {
| info
|@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP
|
| qmp = qmp_event_build_dict("ACPI_DEVICE_OST");
|
|- qov = qmp_output_visitor_new();
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(&obj);
|
| visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err);
| if (err) {
|@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
|
|- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov));
|+ visit_complete(v, &obj);
|+ qdict_put_obj(qmp, "data", obj);
| emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err);
and for commands:
| {
| Error *err = NULL;
|- QmpOutputVisitor *qov = qmp_output_visitor_new();
| Visitor *v;
|
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(ret_out);
| visit_type_AddfdInfo(v, "unused", &ret_in, &err);
|- if (err) {
|- goto out;
|+ if (!err) {
|+ visit_complete(v, ret_out);
| }
|- *ret_out = qmp_output_get_qobject(qov);
|-
|-out:
| error_propagate(errp, err);
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
string_output_visitor_cleanup(); however, we still need to
expose the subtype for string_output_get_string().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-9-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
opts_visitor_cleanup(); which in turn means we no longer need
to return a subtype from opts_visitor_new() nor a public upcast
function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This otherwise causes a use-after-free if network backend cleanup
is performed before character device cleanup.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_source_attach can return any value between 1 and UINT_MAX if you let
QEMU run long enough. However, qemu_chr_fe_add_watch can also return
a negative errno value when the device is disconnected or does not
support chr_add_watch. Change it to return zero to avoid overloading
these values.
Fix the cadence_uart which asserts in this case (easily obtained with
"-serial pty").
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use socket_*() functions from include/qemu/sockets.h instead of
listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are
QAPI based and this patch performs this api conversion since
everything will be using QAPI based sockets in the future. Also add a
helper function socket_address_to_string() in util/qemu-sockets.c
which returns the string representation of socket address. Thetask was
listed on http://wiki.qemu.org/BiteSizedTasks page.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
commit fefe2a78 accidently dropped the code path for injecting
raw packets. This feature is needed for sending gratuitous ARPs
after an incoming migration has completed. The result is increased
network downtime for vservers where the network card is not virtio-net
with the VIRTIO_NET_F_GUEST_ANNOUNCE feature.
Fixes: fefe2a78ab
Cc: qemu-stable@nongnu.org
Cc: hongyang.yang@easystack.cn
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Move all trace-events for files in the net/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-36-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Beginning of reconnect support for vhost-user.
Misc cleanups and fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXY0Q3AAoJECgfDbjSjVRpkVcH/2gTHRE9yUoWe6ROvPV67BKx
8Iy9GzJ3BMO3RolVZEA5KXIevn5TG+pV274BZEuXMD3AL/molv279p0o/gvBYoqq
V0jNH2MO+MV6D9OzhUXcgWSejvybF5W07ojPDU/hlgtFXPZFbJDyt95MWaLiilOg
cCtTuRqgrrRaypcnnk/CIDbC+Ek2kAYdgQHQbfj9ihle3TWO8R0bSXnFqSaqCIkM
4slMlv8y82fODeiO83nkpfAP1NCnfnRC8r8Gv7hbEUTlZQntavx5DuYdiIx6nsJE
W0g+Gpe1o0+jRuMnucGIUZvqzZ0e/I0wZuV16Nsfx+Rbd5+4CzTxZda5Qb05v7I=
=BHbJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
Beginning of reconnect support for vhost-user.
Misc cleanups and fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 17 Jun 2016 01:28:39 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
MAINTAINERS: add Marcel to PCI
msi_init: change return value to 0 on success
fix some coding style problems
pci core: assert ENOSPC when add capability
test: start vhost-user reconnect test
tests: append i386 tests
vhost-net: save & restore vring enable state
vhost-net: save & restore vhost-user acked features
vhost-net: do not crash if backend is not present
vhost-user: disconnect on start failure
qemu-char: add qemu_chr_disconnect to close a fd accepted by listen fd
tests/vhost-user-bridge: workaround stale vring base
tests/vhost-user-bridge: add client mode
vhost-user: add ability to know vhost-user backend disconnection
pci: fix pci_requester_id()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
tests/Makefile.include
The initial vhost-user connection sets the features to be negotiated
with the driver. Renegotiation isn't possible without device reset.
To handle reconnection of vhost-user backend, ensure the same set of
features are provided, and reuse already acked features.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the backend failed to start (for example feature negociation failed),
do not exit, but disconnect the char device instead. Slightly more
robust for reconnect case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current QEMU cannot detect vhost-user backend disconnection. The
patch adds ability to know it.
To know disconnection, add watcher to detect G_IO_HUP event. When
G_IO_HUP event is detected, the disconnected socket will be read
to cause a CHR_EVENT_CLOSED.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* based on Eth, UDP, TCP struct present in eth.h instead of hardcoded
indexes and sizes.
* based on various macros present in eth.h.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch extends the TX/RX packet abstractions with features that will
be used by the e1000e device implementation.
Changes are:
1. Support iovec lists for RX buffers
2. Deeper RX packets parsing
3. Loopback option for TX packets
4. Extended VLAN headers handling
5. RSS processing for RX packets
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This function is from net/socket.c, move it to net.c and net.h.
Add SocketReadState to make others reuse net_fill_rstate().
suggestion from jason.
v4:
- move 'rs->finalize = finalize' to rs_init()
v3:
- remove SocketReadState init callback
- put finalize callback to net_fill_rstate()
v2:
- rename ReadState to SocketReadState
- add SocketReadState init and finalize callback
v1:
- init patch
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
All handling of defaults (default_* variables) is inside vl.c,
move default_net there too, so we can more easily refactor that
code later.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
net_init_tap has a huge stack usage of 8192 bytes approx.
Moving large arrays to heap to reduce stack usage.
Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
After commit 338d3f, we support 'status' property for filter object.
The segfault can be triggered by starting qemu with 'status=off' property
for filter, when the s->incoming_queue is NULL, we reference it directly
in qemu_net_queue_flush() which was called in status_changed() callback
function.
We shouldn't trigger status_changed() before the filter was initialized,
We can check the value of 'nf->netdev' to confirm if the filter is
initialized or not, so let's check its value before calling
status_changed().
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fixes 96a1616("qapi-dealloc: Reduce use outside of generated code")
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
nc_sendv_compat has a huge stack usage of 69680 bytes approx.
Moving large arrays to heap to reduce stack usage.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Pooja Dhannawat <dhannawatpooja1@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
qemu_hexdump() in util/hexdump.c has been changed to give also include a
ascii dump of the buffer. Also, calls to hex_dump() in net/net.c have
been replaced with calls to qemu_hexdump(). This takes care of two misc
BiteSized Tasks.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Isaac Lozano <109lozanoi@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The netmap.c file fails to build on FreeBSD with
net/netmap.c:95:9: warning: implicit declaration of function 'error_setg_errno' is invalid in C99 [-Wimplicit-function-declaration]
error_setg_errno(errp, errno, "Failed to nm_open() %s",
^
net/netmap.c:432:9: warning: implicit declaration of function 'error_propagate' is invalid in C99 [-Wimplicit-function-declaration]
error_propagate(errp, err);
^
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1459429690-6144-1-git-send-email-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The options names were fixed in the qapi layer, but not in the command-line
options.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Filter-redirector is a netfilter plugin.
It gives qemu the ability to redirect net packet.
redirector can redirect filter's net packet to outdev.
and redirect indev's packet to filter.
filter
+
redirector |
+--------------+
| | |
indev +-----------+ +----------> outdev
| | |
+--------------+
|
v
filter
usage:
-netdev user,id=hn0
-chardev socket,id=s0,host=ip_primary,port=X,server,nowait
-chardev socket,id=s1,host=ip_primary,port=Y,server,nowait
-filter-redirector,id=r0,netdev=hn0,queue=tx/rx/all,indev=s0,outdev=s1
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Change filter_mirror_send interface to make it easier
to used by other filter
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter-mirror is a netfilter plugin.
It gives qemu the ability to mirror
packets to a chardev.
usage:
-netdev tap,id=hn0
-chardev socket,id=mirror0,host=ip_primary,port=X,server,nowait
-filter-mirror,id=m0,netdev=hn0,queue=tx/rx/all,outdev=mirror0
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rename the recently-added ip6-foo options into ipv6-foo options, to make
them coherent with other ipv6 options.
Also rework the documentation.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
nvdimm work
sparse cpu id rework
ipmi enhancements
fixes all over the place
pxb option to tweak chassis number
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW6B0mAAoJECgfDbjSjVRpCtMH/2xSrYsLGAM3tQZtcAlpoof/
LNjN0GxTMXWtbDfGLKQMkexAmrDtBOqXTNfPpDaeycvktcMJ4wUCqX8nWC+cNwl+
3Uu4yiR9J5qjB4ANRlHnW45aL9rq7Qv0BBMQvc0AxpKMqZ9sf4okd2a4ZprTbhHq
/q/JnWKa/a4CGAZrfwlonobtT/YvF+cbq6gQOxUWMaemptEZDhYaH8PMtw0Ituw1
HWsI5lkhy+bHC2FeoqKt+p3ypuIXfnbg1rJyAiyVzgwz4289aMoh6nBll6WFRGpI
vEligkFv4GBjNlYloUaGLlJxz3RE/7uPGER2lSH0OYTSVNc1zUbvbmv/7DIucSA=
=0EjS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, virtio, pci, pc, acpi
nvdimm work
sparse cpu id rework
ipmi enhancements
fixes all over the place
pxb option to tweak chassis number
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Mar 2016 14:33:10 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (51 commits)
hw/acpi: fix GSI links UID
ipmi: add some local variables in ipmi_sdr_init
ipmi: remove the need of an ending record in the SDR table
ipmi: use a function to initialize the SDR table
ipmi: add a realize function to the device class
ipmi: add rsp_buffer_set_error() helper
ipmi: remove IPMI_CHECK_RESERVATION() macro
ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpers
ipmi: remove IPMI_CHECK_CMD_LEN() macro
MAINTAINERS: machine core
MAINTAINERS: Add an entry for virtio header files
pc: acpi: clarify why possible LAPIC entries must be present in MADT
pc: acpi: drop cpu->found_cpus bitmap
pc: acpi: create Processor and Notify objects only for valid lapics
pc: acpi: create MADT.lapic entries only for valid lapics
pc: acpi: SRAT: create only valid processor lapic entries
pc: acpi: cleanup qdev_get_machine() calls
machine: introduce MachineClass.possible_cpu_arch_ids() hook
pc: init pcms->apic_id_limit once and use it throughout pc.c
pc: acpi: remove NOP assignment
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds parameters to manage some new options in the qemu -net
command.
Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in
argument to the qemu command.
Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3.
Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"name" is freed after visiting options, instead use the first NetClientState
name. Adds a few assert() for clarifying and checking some impossible states.
READ of size 1 at 0x602000000990 thread T0
#0 0x7f6b251c570c (/lib64/libasan.so.2+0x4770c)
#1 0x5566dc380600 in qemu_find_net_clients_except net/net.c:824
#2 0x5566dc39bac7 in net_vhost_user_event net/vhost-user.c:193
#3 0x5566dbee862a in qemu_chr_be_event /home/elmarco/src/qemu/qemu-char.c:201
#4 0x5566dbef2890 in tcp_chr_disconnect /home/elmarco/src/qemu/qemu-char.c:2790
#5 0x5566dbef2d0b in tcp_chr_sync_read /home/elmarco/src/qemu/qemu-char.c:2835
#6 0x5566dbee8a99 in qemu_chr_fe_read_all /home/elmarco/src/qemu/qemu-char.c:295
#7 0x5566dc39b964 in net_vhost_user_watch net/vhost-user.c:180
#8 0x5566dc5a06c7 in qio_channel_fd_source_dispatch io/channel-watch.c:70
#9 0x7f6b1aa2ab87 in g_main_dispatch /home/elmarco/src/gnome/glib/glib/gmain.c:3154
#10 0x7f6b1aa2b9cb in g_main_context_dispatch /home/elmarco/src/gnome/glib/glib/gmain.c:3769
#11 0x5566dc475ed4 in glib_pollfds_poll /home/elmarco/src/qemu/main-loop.c:212
#12 0x5566dc476029 in os_host_main_loop_wait /home/elmarco/src/qemu/main-loop.c:257
#13 0x5566dc476165 in main_loop_wait /home/elmarco/src/qemu/main-loop.c:505
#14 0x5566dbf08d31 in main_loop /home/elmarco/src/qemu/vl.c:1932
#15 0x5566dbf16783 in main /home/elmarco/src/qemu/vl.c:4646
#16 0x7f6b180bb57f in __libc_start_main (/lib64/libc.so.6+0x2057f)
#17 0x5566dbbf5348 in _start (/home/elmarco/src/qemu/x86_64-softmmu/qemu-system-x86_64+0x3f9348)
0x602000000990 is located 0 bytes inside of 5-byte region [0x602000000990,0x602000000995)
freed by thread T0 here:
#0 0x7f6b2521666a in __interceptor_free (/lib64/libasan.so.2+0x9866a)
#1 0x7f6b1aa332a4 in g_free /home/elmarco/src/gnome/glib/glib/gmem.c:189
#2 0x5566dc5f416f in qapi_dealloc_type_str qapi/qapi-dealloc-visitor.c:134
#3 0x5566dc5f3268 in visit_type_str qapi/qapi-visit-core.c:196
#4 0x5566dc5ced58 in visit_type_Netdev_fields /home/elmarco/src/qemu/qapi-visit.c:5936
#5 0x5566dc5cef71 in visit_type_Netdev /home/elmarco/src/qemu/qapi-visit.c:5960
#6 0x5566dc381a8d in net_visit net/net.c:1049
#7 0x5566dc381c37 in net_client_init net/net.c:1076
#8 0x5566dc3839e2 in net_init_netdev net/net.c:1473
#9 0x5566dc63cc0a in qemu_opts_foreach util/qemu-option.c:1112
#10 0x5566dc383b36 in net_init_clients net/net.c:1499
#11 0x5566dbf15d86 in main /home/elmarco/src/qemu/vl.c:4397
#12 0x7f6b180bb57f in __libc_start_main (/lib64/libc.so.6+0x2057f)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix QEMU crash when -netdev vhost-user,queues=n is passed with number
of queues greater than MAX_QUEUE_NUM.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Now that QEMU wraps the Win32 sockets methods to automatically
set errno upon failure, there is no reason for callers to use
the socket_error() method. They can rely on accessing errno
even on Win32. Remove all use of socket_error() from general
code, leaving it as a static method in oslib-win32.c only.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While computing IP checksum, 'net_checksum_calculate' reads
payload length from the packet. It could exceed the given 'data'
buffer size. Add a check to avoid it.
Reported-by: Liu Ling <liuling-it@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
While the status of filter-buffer changing from 'on' to 'off',
it need to release all the buffered packets, and delete the related
timer, while switch from 'off' to 'on', it need to resume the release
packets timer.
Here, we extract the process of setup timer into a new helper,
which will be used in the new status_changed callback.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
With this property, users can control if this filter is 'on'
or 'off'. The default behavior for filter is 'on'.
For some types of filters, they may need to react to status changing,
So here, we introduced status changing callback/notifier for filter class.
We will skip the disabled ('off') filter when delivering packets in net layer.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Previous implementation of has_ufo, has_vnet_hdr, has_vnet_hdr_len, etc.
did not really probe for virtio-net header support for the netmap
interface attached to the backend. These callbacks were correct for
VALE ports, but incorrect for hardware NICs, pipes, monitors, etc.
This patch fixes the implementation to work properly with all kinds
of netmap ports.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
net_init_tap_one receives in vhostfdname a fd name from vhostfd= or
vhostfds=, or NULL if there is no vhostfd=/vhostfds=. It is simpler
to just check vhostfdname, than it is to check for vhostfd= or
vhostfds=. This also calms down Coverity, which otherwise thinks
that monitor_fd_param could dereference a NULL vhostfdname.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Qemu may crash when we want to add two filters on the same netdev but
the initialization of second fails (e.g missing parameters):
./qemu-system-x86_64 -netdev user,id=un0 \
-object filter-buffer,id=f0,netdev=un0,interval=10 \
-object filter-buffer,id=f1,netdev=un0
Segmentation fault (core dumped)
This is because we don't check whether or not the filter was in the
list of netdev. This patch fixes this.
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
No need to roll our own use of the dealloc visitors when we can
just directly use the qapi_free_FOO() functions that do what we
want in one line.
In net.c, inline net_visit() into its remaining lone caller.
After this patch, test-visitor-serialization.c is the only
non-generated file that needs to use a dealloc visitor, because
it is testing low level aspects of the visitor interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1456262075-3311-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
