Use QTAILQ_FOREACH_SAFE() so that the current QemuOpts can be deleted
while iterating through the whole list.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211008133442.141332-11-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This makes the pthreads check dead in configure, so remove it
as well.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130829.632254-9-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows the use of native signalfd instead of the sigtimedwait
based emulation on systems other than Linux.
Signed-off-by: Kacper Słomiński <kacper.slominski72@gmail.com>
Message-Id: <20210905011621.200785-1-kacper.slominski72@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QAPI schema shouldn't rely on C system headers #define, but on
configure-time project #define, so we can express the build condition in
a C-independent way.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210907121943.3498701-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous code didn't detect overflows if the high 64-bit
of the dividend were equal to the 64-bit divisor. In that case,
64 bits wouldn't be enough to hold the quotient.
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210910112624.72748-2-luis.pires@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Simple unions predate flat unions. Having both complicates the QAPI
schema language and the QAPI generator. We haven't been using simple
unions in new code for a long time, because they are less flexible and
somewhat awkward on the wire.
To prepare for their removal, convert simple union SocketAddressLegacy
to an equivalent flat one, with existing enum SocketAddressType
replacing implicit enum type SocketAddressLegacyKind. Adds some
boilerplate to the schema, which is a bit ugly, but a lot easier to
maintain than the simple union feature.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-9-armbru@redhat.com>
As we can see from the following function call stack, amaster and aslave
can not be NULL: char_pty_open() -> qemu_openpty_raw() -> openpty().
In addition, according to the API specification for openpty():
https://www.gnu.org/software/libc/manual/html_node/Pseudo_002dTerminal-Pairs.html,
the arguments name, termp and winp can all be NULL, but arguments amaster or aslave
can not be NULL.
Finally, amaster and aslave has been dereferenced at the beginning of the openpty().
So the checks on amaster and aslave in the openpty() are redundant. Remove them.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <5F9FE5B8.1030803@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This seems to be either a glibc or gcc bug, but the code
appears to be fine with the warning suppressed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210803211907.150525-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass qemu_vfio_do_mapping() an Error* argument so it can propagate
any error to callers. Replace error_report() which only report
to the monitor by the more generic error_setg_errno().
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-11-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Both qemu_vfio_find_fixed_iova() and qemu_vfio_find_temp_iova()
return an errno which is unused (or overwritten). Have them propagate
eventual errors to callers, returning a boolean (which is what the
Error API recommends, see commit e3fe3988d7 "error: Document Error
API usage rules" for rationale).
Suggested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-9-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Extract qemu_vfio_water_mark_reached() for readability,
and have it provide an error hint it its Error* handle.
Suggested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-8-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently qemu_vfio_dma_map() displays errors on stderr.
When using management interface, this information is simply
lost. Pass qemu_vfio_dma_map() an Error** handle so it can
propagate the error to callers.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-7-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_vfio_add_mapping() returns a pointer to an indexed entry
in pre-allocated QEMUVFIOState::mappings[], thus can not be NULL.
Remove the pointless check.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-5-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Simplify qemu_vfio_dma_[un]map() handlers by replacing a pair of
qemu_mutex_lock/qemu_mutex_unlock calls by the WITH_QEMU_LOCK_GUARD
macro.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-4-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of displaying the error on stderr, use error_report()
which also report to the monitor.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-3-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 4cfd970ec1 added an
assert which ensures the path within an address of a unix
socket returned from the kernel is at least one byte and
does not exceed sun_path buffer. Both of this constraints
are wrong:
A unix socket can be unnamed, in this case the path is
completely empty (not even \0)
And some implementations (notable linux) can add extra
trailing byte (\0) _after_ the sun_path buffer if we
passed buffer larger than it (and we do).
So remove the assertion (since it causes real-life breakage)
but at the same time fix the usage of sun_path. Namely,
we should not access sun_path[0] if kernel did not return
it at all (this is the case for unnamed sockets),
and use the returned salen when copyig actual path as an
upper constraint for the amount of bytes to copy - this
will ensure we wont exceed the information provided by
the kernel, regardless whenever there is a trailing \0
or not. This also helps with unnamed sockets.
Note the case of abstract socket, the sun_path is actually
a blob and can contain \0 characters, - it should not be
passed to g_strndup and the like, it should be accessed by
memcpy-like functions.
Fixes: 4cfd970ec1
Fixes: http://bugs.debian.org/993145
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
CC: qemu-stable@nongnu.org
Commit 776b97d360 "qemu-sockets: add abstract UNIX domain socket
support" neglected to update socket_sockaddr_to_address_unix() and
copied the whole sun_path without taking "salen" into account.
Later, commit 3b14b4ec49 "sockets: Fix socket_sockaddr_to_address_unix()
for abstract sockets" handled the abstract UNIX path, by stripping the
leading \0 character and fixing address details, but didn't use salen
either.
Not taking "salen" into account may result in incorrect "path" being
returned in monitors commands, as we read past the address which is not
necessarily \0-terminated.
Fixes: 776b97d360
Fixes: 3b14b4ec49
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
From clang-13:
util/selfmap.c:26:21: error: variable 'errors' set but not used \
[-Werror,-Wunused-but-set-variable]
Quite right of course, but there's no reason not to check errors.
First, incrementing errors is incorrect, because qemu_strtoul
returns an errno not a count -- just or them together so that
we have a non-zero value at the end.
Second, if we have an error, do not add the struct to the list,
but free it instead.
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit d8fb7d0969 ("vl: switch -M parsing
to keyval") stopped adding the "machine" QemuOptsList. This causes
"machine" options to not show up in QMP query-command-line-options
output. For example, libvirt cannot detect that kernel_irqchip support
is available.
Adjust the "machine" opts enumeration in
qmp_query_command_line_options() so that options are properly reported.
Fixes: d8fb7d0969 ("vl: switch -M parsing to keyval")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210721151055.424580-1-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use it to avoid some clang-12 -Watomic-alignment errors,
forcing some structures to be aligned and as a pointer when
we have ensured that the address is aligned.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The `aio-max-batch` parameter will be propagated to AIO engines
and it will be used to control the maximum number of queued requests.
When there are in queue a number of requests equal to `aio-max-batch`,
the engine invokes the system call to forward the requests to the kernel.
This parameter allows us to control the maximum batch size to reduce
the latency that requests might accumulate while queued in the AIO
engine queue.
If `aio-max-batch` is equal to 0 (default value), the AIO engine will
use its default maximum batch size value.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The leak is basically impossible to reach, since the only common way
to get ferror(fp) is by passing a directory to -readconfig. In that
case, the error occurs before qdict is set to anything non-NULL.
However, it's theoretically possible to get there after an EIO.
Cc: armbru@redhat.com
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: f7544edcd3 ("qemu-config: add error propagation to qemu_config_parse", 2021-03-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure that the callback to qemu_config_foreach is never called upon
an error, by moving the invocation before the "out" label.
Cc: armbru@redhat.com
Fixes: 3770141139 ("qemu-config: parse configuration files to a QDict", 2021-06-04)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Make blockdev-reopen stable
- Remove deprecated qemu-img backing file without format
- rbd: Convert to coroutines and add write zeroes support
- rbd: Updated MAINTAINERS
- export/fuse: Allow other users access to the export
- vhost-user: Fix backends without multiqueue support
- Fix drive-backup transaction endless drained section
-----BEGIN PGP SIGNATURE-----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=kH+r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
- Make blockdev-reopen stable
- Remove deprecated qemu-img backing file without format
- rbd: Convert to coroutines and add write zeroes support
- rbd: Updated MAINTAINERS
- export/fuse: Allow other users access to the export
- vhost-user: Fix backends without multiqueue support
- Fix drive-backup transaction endless drained section
# gpg: Signature made Fri 09 Jul 2021 13:49:22 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (28 commits)
block: Make blockdev-reopen stable API
iotests: Test reopening multiple devices at the same time
block: Support multiple reopening with x-blockdev-reopen
block: Acquire AioContexts during bdrv_reopen_multiple()
block: Add bdrv_reopen_queue_free()
qcow2: Fix dangling pointer after reopen for 'file'
qemu-img: Improve error for rebase without backing format
qemu-img: Require -F with -b backing image
qcow2: Prohibit backing file changes in 'qemu-img amend'
blockdev: fix drive-backup transaction endless drained section
vhost-user: Fix backends without multiqueue support
MAINTAINERS: add block/rbd.c reviewer
block/rbd: fix type of task->complete
iotests/fuse-allow-other: Test allow-other
iotests/308: Test +w on read-only FUSE exports
export/fuse: Let permissions be adjustable
export/fuse: Give SET_ATTR_SIZE its own branch
export/fuse: Add allow-other option
export/fuse: Pass default_permissions for mount
util/uri: do not check argument of uri_free()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We know that in the body of this if statement i is less than len, so
we really should be copying len - i bytes not i - len bytes.
Fix this typo.
Fixes: 8d8404f156 ("util: Add qemu_guest_getrandom and associated routines")
Signed-off-by: Mark Nelson <mdnelson8@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210709120600.11080-1-mdnelson8@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
With target-specific modules we can have multiple modules implementing
the same object. Therefore we have to check the target arch on lookup
to find the correct module.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-20-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add module_allow_arch() to set the target architecture.
In case a module is limited to some arch verify arches
match and ignore the module if not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-19-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One for module load and one for qom type lookup.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-18-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use module database to figure which module adds given QemuOpts group.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-17-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use module database to figure which module implements a given QOM type.
Drop hard-coded object list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-16-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use module database for module dependencies.
Drop hard-coded dependency list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-15-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add script to generate C source with a small
database containing the module meta-data.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-4-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While most libraries do not need a CONFIG_* symbol because the
"when:" clauses are enough, some do. Add them back or stop
using them if possible.
In the case of libpmem, the statement to add the CONFIG_* symbol
was still in configure, but could not be triggered because it
checked for "no" instead of "disabled" (and it would be wrong anyway
since the test for the library has not been done yet).
Reported-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Fixes: 587d59d6cc ("configure, meson: convert virgl detection to meson", 2021-07-06)
Fixes: 83ef16821a ("configure, meson: convert libdaxctl detection to meson", 2021-07-06)
Fixes: e36e8c70f6 ("configure, meson: convert libpmem detection to meson", 2021-07-06)
Fixes: 53c22b68e3 ("configure, meson: convert liburing detection to meson", 2021-07-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
uri_free() checks if its argument is NULL in uri_clean() and g_free().
There is no need to check the argument before the call.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Message-Id: <20210629063602.4239-1-xypron.glpk@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not safe to pretend that emulated NVDIMM supports
persistence while backend actually failed to enable it
and used non-persistent mapping as fall back.
Instead of falling-back, QEMU should be more strict and
error out with clear message that it's not supported.
So if user asks for persistence (pmem=on), they should
store backing file on NVDIMM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210111203332.740815-1-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
-M was the sole user of qemu_opts_set and qemu_opts_set_defaults,
remove them and the arguments that they used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow parsing multiple keyval sequences into the same dictionary.
This will be used to simplify the parsing of the -M command line
option, which is currently a .merge_lists = true QemuOpts group.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch introduces a function that merges two keyval-produced
(or keyval-like) QDicts. It can be used to emulate the behavior of
.merge_lists = true QemuOpts groups, merging -readconfig sections and
command-line options in a single QDict, and also to implement -set.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
