Commit Graph

58 Commits

Author SHA1 Message Date
Markus Armbruster
a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Peter Maydell
12ec8bd51e arm: Rename hw/arm/arm.h to hw/arm/boot.h
The header file hw/arm/arm.h now includes only declarations
relating to hw/arm/boot.c functionality. Rename it accordingly,
and adjust its header comment.

The bulk of this commit was created via
 perl -pi -e 's|hw/arm/arm.h|hw/arm/boot.h|' hw/arm/*.c include/hw/arm/*.h

In a few cases we can just delete the #include:
hw/arm/msf2-soc.c, include/hw/arm/aspeed_soc.h and
include/hw/arm/bcm2836.h did not require it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190516163857.6430-4-peter.maydell@linaro.org
2019-05-23 14:47:43 +01:00
Philippe Mathieu-Daudé
04f3c0084d hw: Remove unused 'hw/devices.h' include
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-03-07 22:16:11 +01:00
Peter Maydell
582c8f75a2 hw/arm/highbank: Connect VIRQ and VFIQ
Connect the VIRQ and VFIQ lines from the GIC to the CPU;
these exist always for both CPU and GIC whether the
virtualization extensions are enabled or not, so we
can just unconditionally connect them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20180821132811.17675-5-peter.maydell@linaro.org
2018-08-24 13:17:33 +01:00
Peter Maydell
9bca0edb28 Change references to serial_hds[] to serial_hd()
Change all the uses of serial_hds[] to go via the new
serial_hd() function. Code change produced with:
 find hw -name '*.[ch]' | xargs sed -i -e 's/serial_hds\[\([^]]*\)\]/serial_hd(\1)/g'

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180420145249.32435-8-peter.maydell@linaro.org
2018-04-26 13:57:00 +01:00
Peter Maydell
eb7d1f1763 hw/arm/highbank: don't make sysram 'nomigrate'
Currently we use memory_region_init_ram_nomigrate() to create
the "highbank.sysram" memory region, and we don't manually
register it with vmstate_register_ram(). This currently
means that its contents are migrated but as a ram block
whose name is the empty string; in future it may mean they
are not migrated at all. Use memory_region_init_ram() instead.

Note that this is a cross-version migration compatibility
break for the "highbank" and "midway" machines.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180420124835.7268-2-peter.maydell@linaro.org
2018-04-26 11:04:39 +01:00
Thomas Huth
7eceff5b5a hw: Do not include "sysemu/block-backend.h" if it is not necessary
After reviewing a patch from Philippe that removes block-backend.h
from hw/lm32/milkymist.c, I noticed that this header is included
unnecessarily in a lot of other files, too. Remove those unneeded
includes to speed up the compilation process a little bit.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518684912-31637-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12 16:12:46 +01:00
Prasad J Pandit
c5c752af8c highbank: validate register offset before access
An 'offset' parameter sent to highbank register r/w functions
could be greater than number(NUM_REGS=0x200) of hb registers,
leading to an OOB access issue. Add check to avoid it.

Reported-by: Moguofang (Dennis mo) <moguofang@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20171113062658.9697-1-ppandit@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-13 13:55:24 +00:00
Igor Mammedov
ba1ba5cca3 arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly
there are 2 use cases to deal with:
  1: fixed CPU models per board/soc
  2: boards with user configurable cpu_model and fallback to
     default cpu_model if user hasn't specified one explicitly

For the 1st
  drop intermediate cpu_model parsing and use const cpu type
  directly, which replaces:
     typename = object_class_get_name(
           cpu_class_by_name(TYPE_ARM_CPU, cpu_model))
     object_new(typename)
  with
     object_new(FOO_CPU_TYPE_NAME)
  or
     cpu_generic_init(BASE_CPU_TYPE, "my cpu model")
  with
     cpu_create(FOO_CPU_TYPE_NAME)

as result 1st use case doesn't have to invoke not necessary
translation and not needed code is removed.

For the 2nd
 1: set default cpu type with MachineClass::default_cpu_type and
 2: use generic cpu_model parsing that done before machine_init()
    is run and:
    2.1: drop custom cpu_model parsing where pattern is:
       typename = object_class_get_name(
           cpu_class_by_name(TYPE_ARM_CPU, cpu_model))
       [parse_features(typename, cpu_model, &err) ]

    2.2: or replace cpu_generic_init() which does what
         2.1 does + create_cpu(typename) with just
         create_cpu(machine->cpu_type)
as result cpu_name -> cpu_type translation is done using
generic machine code one including parsing optional features
if supported/present (removes a bunch of duplicated cpu_model
parsing code) and default cpu type is defined in an uniform way
within machine_class_init callbacks instead of adhoc places
in boadr's machine_init code.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-19 09:09:32 -03:00
Peter Maydell
4672cbd7be hw/arm: Set ignore_memory_transaction_failures for most ARM boards
Set the MachineClass flag ignore_memory_transaction_failures
for almost all ARM boards. This means they retain the legacy
behaviour that accesses to unimplemented addresses will RAZ/WI
rather than aborting, when a subsequent commit adds support
for external aborts.

The exceptions are:
 * virt -- we know that guests won't try to prod devices
   that we don't describe in the device tree or ACPI tables
 * mps2 -- this board was written to use unimplemented-device
   for all the ranges with devices we don't yet handle

New boards should not set the flag, but instead be written
like the mps2.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1504626814-23124-3-git-send-email-peter.maydell@linaro.org
For the Xilinx boards:
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-09-07 13:54:54 +01:00
Philippe Mathieu-Daudé
c2de81e2b2 hw/arm: use defined type name instead of hard-coded string
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-04 15:21:53 +01:00
Peter Maydell
1cfe48c1ce memory: Rename memory_region_init_ram() to memory_region_init_ram_nomigrate()
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate().
This leaves the way clear for us to provide a memory_region_init_ram()
which does handle migration.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
2017-07-14 17:59:42 +01:00
Alistair Francis
3dc6f86936 Convert error_report() to warn_report()
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.

All of the warnings were changed using these two commands:
    find ./* -type f -exec sed -i \
      's|error_report(".*warning[,:] |warn_report("|Ig' {} +

Indentation fixed up manually afterwards.

The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-13 13:49:58 +02:00
Eric Blake
cf83f14005 shutdown: Add source information to SHUTDOWN and RESET
Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.

It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.

Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-23 13:28:17 +02:00
Markus Armbruster
2a7ae4ee50 hw/arm/highbank: Default -drive to if=ide instead of if=scsi
These machines have no onboard SCSI HBA, and no way to plug one.
-drive if=scsi therefore cannot work.  They do have an onboard IDE
controller (sysbus-ahci), but fail to honor if=ide.

Change their default to if=ide, and add a TODO comment on what needs
to be done to actually honor -drive if=ide.

Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1487153147-11530-6-git-send-email-armbru@redhat.com>
2017-02-21 13:10:53 +01:00
xiaoqiang zhao
f0d1d2c115 hw/char: QOM'ify pl011 model
* drop qemu_char_get_next_serial and use chardev prop
* add pl011_create wrapper function to create pl011 uart device
* change affected board code to use the new way

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-2-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 16:59:31 +01:00
xiaoqiang.zhao
ff7a27c15a hw/arm: QOM'ify highbank.c
Drop the use of old SysBus init function and use instance_init

Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:42:06 +01:00
Markus Armbruster
da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Eduardo Habkost
0e6aac87fd machine: Use type_init() to register machine classes
Change all machine_init() users that simply call type_register*()
to use type_init().

Cc: Evgeny Voevodin <e.voevodin@samsung.com>
Cc: Maksim Kozlov <m.kozlov@samsung.com>
Cc: Igor Mitsyanko <i.mitsyanko@gmail.com>
Cc: Dmitry Solodkiy <d.solodkiy@samsung.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-03-16 15:34:05 -03:00
Andrew Baumann
716536a9b6 arm/boot: move highbank secure board setup code to common routine
The new version is slightly different, to support Rasbperry Pi (in
particular, Pi1's arm11 core which doesn't support v7 instructions
such as MOVW).

Tested-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03 15:00:46 +00:00
Peter Maydell
12b167226f hw/arm: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449505425-32022-4-git-send-email-peter.maydell@linaro.org
2016-01-18 16:33:32 +00:00
Markus Armbruster
c525436e69 hw: Don't use hw_error() for machine initialization errors
Printing CPU registers is not helpful during machine initialization.
Moreover, these are straightforward configuration or "can get
resources" errors, so dumping core isn't appropriate either.  Replace
hw_error() by error_report(); exit(1).  Matches how we report these
errors in other machine initializations.

Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-2-git-send-email-armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-01-13 11:58:58 +01:00
Markus Armbruster
007b06578a Use error_fatal to simplify obvious fatal errors
Done with this Coccinelle semantic patch:

    @@
    type T;
    identifier FUN, RET;
    expression list ARGS;
    expression ERR, EC;
    @@
    (
    -    T RET = FUN(ARGS, &ERR);
    +    T RET = FUN(ARGS, &error_fatal);
    |
    -    RET = FUN(ARGS, &ERR);
    +    RET = FUN(ARGS, &error_fatal);
    |
    -    FUN(ARGS, &ERR);
    +    FUN(ARGS, &error_fatal);
    )
    -    if (ERR != NULL) {
    -        error_report_err(ERR);
    -        exit(EC);
    -    }

This is actually a more elegant version of my initial semantic patch
by courtesy of Eduardo.

It leaves dead Error * variables behind, cleaned up manually.

Cc: qemu-arm@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-01-13 11:58:58 +01:00
Peter Crosthwaite
40340e5f22 arm: highbank: Implement PSCI and dummy monitor
Firstly, enable monitor mode and PSCI, both of which are features of
this board.

In addition to PSCI, this board also uses SMC for cache maintenance
ops. This means we need a secure monitor to catch these and nop them.
Use the ARM boot board-setup feature to implement this. The SMC trap
implements the needed nop while all other traps will pen the CPU.

As a KVM CPU cannot run in secure mode, do not do the board-setup if
not running TCG. Report a warning explaining the limitation in this
case.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 0fd0d12f0fa666c86616c89447861a70dbe27312.1447007690.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-10 13:37:33 +00:00
Peter Crosthwaite
dca6eeed8c arm: highbank: Defeature CPU override
This board should not support CPU model override. This allows for
easier patching of the board with being able to rely on the CPU
type being correct.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 471a61e049c7ca6e82f5ef6668889a1d518c7e00.1447007690.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-10 13:37:33 +00:00
Andreas Färber
8a661aea0e Revert use of DEFINE_MACHINE() for registrations of multiple machines
The script used for converting from QEMUMachine had used one
DEFINE_MACHINE() per machine registered. In cases where multiple
machines are registered from one source file, avoid the excessive
generation of module init functions by reverting this unrolling.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-09-19 16:40:27 +02:00
Eduardo Habkost
e264d29de2 Use DEFINE_MACHINE() to register all machines
Convert all machines to use DEFINE_MACHINE() instead of QEMUMachine
automatically using a script.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Style cleanups, convert imx25_pdk machine]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-09-19 16:40:15 +02:00
Markus Armbruster
f8ed85ac99 Fix bad error handling after memory_region_init_ram()
Symptom:

    $ qemu-system-x86_64 -m 10000000
    Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456:
    upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory
    Aborted (core dumped)

Root cause: commit ef701d7 screwed up handling of out-of-memory
conditions.  Before the commit, we report the error and exit(1), in
one place, ram_block_add().  The commit lifts the error handling up
the call chain some, to three places.  Fine.  Except it uses
&error_abort in these places, changing the behavior from exit(1) to
abort(), and thus undoing the work of commit 3922825 "exec: Don't
abort when we can't allocate guest memory".

The three places are:

* memory_region_init_ram()

  Commit 4994653 (right after commit ef701d7) lifted the error
  handling further, through memory_region_init_ram(), multiplying the
  incorrect use of &error_abort.  Later on, imitation of existing
  (bad) code may have created more.

* memory_region_init_ram_ptr()

  The &error_abort is still there.

* memory_region_init_rom_device()

  Doesn't need fixing, because commit 33e0eb5 (soon after commit
  ef701d7) lifted the error handling further, and in the process
  changed it from &error_abort to passing it up the call chain.
  Correct, because the callers are realize() methods.

Fix the error handling after memory_region_init_ram() with a
Coccinelle semantic patch:

    @r@
    expression mr, owner, name, size, err;
    position p;
    @@
            memory_region_init_ram(mr, owner, name, size,
    (
    -                              &error_abort
    +                              &error_fatal
    |
                                   err@p
    )
                                  );
    @script:python@
        p << r.p;
    @@
    print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column)

When the last argument is &error_abort, it gets replaced by
&error_fatal.  This is the fix.

If the last argument is anything else, its position is reported.  This
lets us check the fix is complete.  Four positions get reported:

* ram_backend_memory_alloc()

  Error is passed up the call chain, ultimately through
  user_creatable_complete().  As far as I can tell, it's callers all
  handle the error sanely.

* fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize()

  DeviceClass.realize() methods, errors handled sanely further up the
  call chain.

We're good.  Test case again behaves:

    $ qemu-system-x86_64 -m 10000000
    qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
    [Exit 1 ]

The next commits will repair the rest of commit ef701d7's damage.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-18 14:39:29 +02:00
Peter Maydell
5ae79fe825 hw/arm/highbank.c: Wire FIQ between CPU <> GIC
Connect FIQ output of the GIC CPU interfaces to the CPUs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-18-git-send-email-peter.maydell@linaro.org
2015-05-12 11:57:19 +01:00
Peter Maydell
42874d3a8c Switch non-CPU callers from ld/st*_phys to address_space_ld/st*
Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.

A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.

===begin===
#!/bin/sh -e
# Usage:
# ./ldst-phys.spatch.sh > ldst-phys.spatch
# spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/        /g' > out.patch
# patch -p1 < out.patch

for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@

ld${FN}_phys(E1->as,E2)

@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@

-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)

EOF

done

for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@

st${FN}_phys(E1->as,E2,E3)

@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@

-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)

EOF

done
===endit===

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-26 16:49:24 +01:00
Dirk Müller
c8623c0215 arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.

Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.

Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.

Signed-off-by: Dirk Mueller <dmueller@suse.com>
Message-id: CAL5wTH4UHYKpJF=dLJfFzxpufjY189chnCow47-ySuLf8GLbug@mail.gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-08 17:30:36 +01:00
Stefan Weil
60ff4e63e2 hw/arm/highbank: Fix resource leak and wrong image loading
Coverity reports a resource leak for sysboot_filename which is allocated
by qemu_find_file.

In addition, that name is used to get the size of the image, but a
different image name was used to load it.

In addition, instead of passing the maximum allowed image size the actual
image size was passed to load_image_targphys.

Fix all three issues.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1426326781-2488-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-01 17:57:29 +01:00
Gonglei
6e05a12f8f arm: fix memory leak
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-19 11:11:55 +03:00
Markus Armbruster
565f65d271 error: Use error_report_err() where appropriate
Coccinelle semantic patch:

    @@
    expression E;
    @@
    -    error_report("%s", error_get_pretty(E));
    -    error_free(E);
    +    error_report_err(E);
    @@
    expression E, S;
    @@
    -    error_report("%s", error_get_pretty(E));
    +    error_report_err(E);
    (
         exit(S);
    |
         abort();
    )

Trivial manual touch-ups in block/sheepdog.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-18 10:51:09 +01:00
Greg Bellows
61e2f3521c target-arm: Disable EL3 on unsupported machines
Disables the CPU ARM_FEATURE_EL3 featuere on machine models that can be
configured to use Cortex-A9, Cortex-A15, and ARM1176 but don't officially
support EL3.  This preserves backwards compatibility.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-15-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 23:12:28 +00:00
Markus Armbruster
4be746345f hw: Convert from BlockDriverState to BlockBackend, mostly
Device models should access their block backends only through the
block-backend.h API.  Convert them, and drop direct includes of
inappropriate headers.

Just four uses of BlockDriverState are left:

* The Xen paravirtual block device backend (xen_disk.c) opens images
  itself when set up via xenbus, bypassing blockdev.c.  I figure it
  should go through qmp_blockdev_add() instead.

* Device model "usb-storage" prompts for keys.  No other device model
  does, and this one probably shouldn't do it, either.

* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
  blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
  which has only the BlockDriverState.

* PC87312State has an unused BlockDriverState[] member.

The next two commits take care of the latter two.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 14:02:25 +02:00
Hu Tao
49946538d2 memory: add parameter errp to memory_region_init_ram
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-09 13:41:43 +02:00
Marcel Apfelbaum
3ef9622182 machine: Conversion of QEMUMachineInitArgs to MachineState
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields
are copied into MachineState. Removed duplicated fields from MachineState.

All the other changes are only mechanical refactoring, no semantic changes.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390)
Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC)
[AF: Renamed ms -> machine, use MACHINE_GET_CLASS()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-28 17:35:01 +02:00
Juan Quintela
8f1e884b38 savevm: Remove all the unneeded version_minimum_id_old (arm)
After commit 767adce2d, they are redundant.  This way we don't assign them
except when needed.  Once there, there were lots of cases where the ".fields"
indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (apart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: fixed minor conflict, corrected commit message typos]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-13 16:09:35 +01:00
Peter Maydell
d097696eba hw/arm/vexpress, hw/arm/highbank: Don't insist that CPU has reset-cbar property
For the machine models which can have a Cortex-A15 CPU (vexpress-a15 and
midway), silently continue if the CPU object has no reset-cbar property
rather than failing. This allows these boards to be used under KVM with
the "-cpu host" option, since the 'host' CPU object has no reset-cbar
property.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
2014-04-04 18:01:09 +01:00
Peter Maydell
3b418d0c45 hw/arm/highbank: Don't segfault on unknown CPU names
If the user passes an unknown CPU name via the '-cpu' option, exit
with an error message rather than segfaulting.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
2014-04-04 17:46:11 +01:00
Edgar E. Iglesias
2198a12143 exec: Make stl_phys_notdirty input an AddressSpace
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11 22:57:24 +10:00
Stefan Weil
112f2ac98d hw/arm/highbank: Simplify code (memory region in device state)
The memory region can be included by value instead of by reference in the
device state.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-23 16:02:19 +04:00
Peter Crosthwaite
e2cddeeb97 arm/highbank.c: Fix MPCore periphbase name
GIC_BASE_ADDR is not the base address of the GIC. Its clear from the
code that this is the base address of the MPCore. Rename to
MPCORE_PERIPHBASE accordingly.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 90798bd3507205c16238b8b19a1a58c5437cf7ca.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:29 +00:00
Peter Crosthwaite
c0f1ead985 arm/highbank: Fix CBAR initialisation
Fix the CBAR initialisation by using the newly defined static property.
CBAR is now set before realization, so the intended value is now
actually used.

So I have kind of tested this. I booted an ARM kernel on Highbank with
the stock Highbank DTB. It doesn't boot (and I will be doing something
wrong), but before this patch I got this:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /workspaces/pcrost/public/linux2.git/arch/arm/mm/ioremap.c:301 __arm_ioremap_pfn_caller+0x180/0x198()
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W 3.13.0-rc1-next-20131126-dirty #2
[<c0015164>] (unwind_backtrace) from [<c00118c0>] (show_stack+0x10/0x14)
[<c00118c0>] (show_stack) from [<c02bd5fc>] (dump_stack+0x78/0x90)
[<c02bd5fc>] (dump_stack) from [<c001f110>] (warn_slowpath_common+0x68/0x84)
[<c001f110>] (warn_slowpath_common) from [<c001f1f4>] (warn_slowpath_null+0x1c/0x24)
[<c001f1f4>] (warn_slowpath_null) from [<c0017c6c>] (__arm_ioremap_pfn_caller+0x180/0x198)
[<c0017c6c>] (__arm_ioremap_pfn_caller) from [<c0017cd8>] (__arm_ioremap_caller+0x54/0x5c)
[<c0017cd8>] (__arm_ioremap_caller) from [<c0017d10>] (__arm_ioremap+0x18/0x1c)
[<c0017d10>] (__arm_ioremap) from [<c03913c0>] (highbank_init_irq+0x34/0x8c)
[<c03913c0>] (highbank_init_irq) from [<c038c228>] (init_IRQ+0x28/0x2c)
[<c038c228>] (init_IRQ) from [<c03899ec>] (start_kernel+0x234/0x398)
[<c03899ec>] (start_kernel) from [<00008074>] (0x8074)
---[ end trace 3406ff24bd97382f ]---

Which disappears with this patch.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: fedec366aaa512d75093635f523d1dbcb3358361.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:28 +00:00
Peter Crosthwaite
f282f29626 arm/highbank: Use object_new() rather than cpu_arm_init()
To allow the machine model to set device properties before CPU
realization.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8c671e500390c8be0cc363e887e32867d1d1b0d2.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:28 +00:00
Markus Armbruster
c165473269 hw: Clean up bogus default boot order
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.

Machines that care:

* pc and its variants

  Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
  'c', 'd' and 'n'.  Reject all others (fatal with -boot).

* nseries (n800, n810)

  Check whether order starts with 'n'.  Silently ignored otherwise.

* prep, g3beige, mac99

  Extract the first character the machine understands (subset of
  'a'..'f').  Silently ignored otherwise.

* spapr

  Accept an arbitrary string (vl.c restricts it to contain only
  'a'..'p', no duplicates).

* sun4[mdc]

  Use the first character.  Silently ignored otherwise.

Strip characters these machines ignore from their default boot order.

For all other machines, remove the unused default boot order
alltogether.

Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-28 10:16:47 +03:00
Peter Maydell
9188dbf71a hw/arm/highbank: Don't use arm_pic_init_cpu()
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-5-git-send-email-peter.maydell@linaro.org
2013-08-20 14:54:29 +01:00
Andreas Färber
426533faed highbank: QOM cast cleanup for HighbankRegsState
Add type constant and use QOM casts.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 21:06:18 +02:00
Andre Przywara
b25a83f053 ARM/highbank: add support for Calxeda ECX-2000 / Midway
The Calxeda ECX-2000 chip (aka. Midway) is model-wise quite similar
to the Highbank. The most prominent difference is the Cortex-A15 CPU
core in it, together with the associated core peripherals.

Add a new ARM machine type called "midway".
Move the L2 cache controller device into the Highbank specific part,
since Midway does not have (and need) it.

Signed-off-by: Andre Przywara <andre.przywara@calxeda.com>
Message-id: 1373026897-12085-3-git-send-email-andre.przywara@calxeda.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-15 16:25:57 +01:00