The whole usb_host_close() function is skipped in case the device is not
in attached state. This is wrong though, only then usb_device_detach()
must be skipped, all other cleanup (especially device reset and closing
the file handle) still needs to be done. There are code paths where
usb_host_close() is called with the device in detached state already.
This fixes usb-host devices not being released and returned to the host
after removing them with device_del.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In case the host uses the usb device usbfs will refuse to set the
configuration due to the device being busy. Handle this case by
disconnection the interfaces, then trying again.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move code to claim usb ports and to disconnect usb interfaces into
usb_host_claim_port and usb_host_disconnect_ifaces functions. No
functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
USB Devices can have up to 15 IN and 15 OUT endpoints, not 15 endpoints
total. Move from one array to two arrays (one IN, one OUT) to maintain
the endpoint state.
When configured to pass through a specific host port (using hostbus and
hostport properties), try to claim the port if supported by the kernel.
That will avoid any kernel drivers binding to devices plugged into that
port. It will not stop any userspace apps (such as usb_modeswitch)
access the device via usbfs though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is perfectly fine to leave the usb device in unconfigured state
(USBHostDevice->configuration == 0). Just do that and wait for the
guest to explicitly set a configuration. This is closer to what real
hardware does and it also simplifies the device initialization. There
is no need to figure how the device is configured on the host.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Limit the number of times qemu tries to open host devices to three.
Reset error counter when the device goes away, after un-plugging and
re-plugging the device qemu will try again three times.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Two fixes for the price of one ;)
First, reinitialize the endpoint table after device reset.
This is needed anyway as the reset might have switched interfaces.
It also clears the endpoint halted state.
Second the CLEAR_HALT ioctl wants a unsigned int passed in as
argument, not uint8_t.
This gets my usb sd card reader (sandisk micromate) going.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a bunch of trace points to usb-linux.c Drop a bunch of DPRINTK's in
favor of the trace points. Also cleanup error reporting a bit while being
at it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add full support for iovecs to usb-host. The code can split large
transfers into smaller ones already, we are using this to also split
requests at iovec borders.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Zap data pointer from USBPacket, add a QEMUIOVector instead.
Add a bunch of helper functions to manage USBPacket data.
Switch over users to the new interface.
Note that USBPacket->len was used for two purposes: First to
pass in the buffer size and second to return the number of
transfered bytes or the status code on async transfers. There
is a new result variable for the latter. A new status code
was added to catch uninitialized result.
Nobody creates iovecs with more than one element (yet).
Some users are (temporarely) limited to iovecs with a single
element to keep the patch size as small as possible.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows to pass additional information to the notifier callback
which is useful if sender and receiver do not share any other distinct
data structure.
Will be used first for the clock reset notifier.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some usb2 highspeed devices, like usb-msd devices, work fine when redirected
to a usb1 virtual controller. Allow this to avoid the new speedhecks causing
regressions for users who do not enable the new experimental ehci code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is used to indicate at which speed[s] the device can operate,
so that this can be checked to match the ports capabilities when it gets
attached to a bus.
Note that currently all usb1 emulated device claim to be fullspeed, this
seems to not cause any problems, but still seems wrong, because with real
hardware keyboards, mice and tablets usually are lo-speed, so reporting these
as fullspeed devices seems wrong.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Track the number of iso urbs which are currently in flight.
Log a message in case the count goes down to zero. Also
warn in case many urbs are returned at the same time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qdev property for the number of iso urbs which
usb-linux keeps in flight, so it can be configured at
runtime. Make it default to four (old hardcoded value
used to be three).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
1024 bytes is way to small, one hd UVC webcam I have over here has so
many resolutions its descriptors take op close to 4k. Hopefully 8k will
be enough for all devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a user wants to redirect 2 identical usb sticks, in theory this is
possible by doing:
usb_add host🔢5678
usb_add host🔢5678
But this will lead to us trying to open the first stick twice, since we
don't break the loop after having found a match in our filter list, so the next'
filter list entry will result in us trying to open the same device again.
Fix this by adding the missing break.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The connectinfo ioctl only differentiates between lo speed devices, and
all other speeds, where as we would like to know the real speed. The real
speed is available in sysfs so use that when available.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Factor out disconnect code (called when a device disappears) to a
separate function. Add a check for ENODEV errno to a few more places
to make sure we notice disconnects.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Remove the cancel callback from the USBPacket struct, move it over
to USBDeviceInfo. Zap usb_defer_packet() which is obsolete now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Calculate the max packet size correctly. Only bits 0..11 specify the size,
bits 11+12 specify the number of (highspeed) microframes the endpoint wants
to use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for splitting large transfers into multiple smaller ones.
This is needed for the upcoming EHCI emulation which allows guests
to submit requests up to 20k in size. The linux kernel allows 16k
max size though.
Based on a patch from David Ahern, see
http://www.mail-archive.com/qemu-devel@nongnu.org/msg30337.html
Cc: David Ahern <daahern@cisco.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Lookup async urbs which are to be canceled using the linked list
instead of the direct opaque pointer. There are two reasons we
are doing that: First, to avoid the opaque poiner to the callback,
which is needed for upcoming cleanups. Second, because we might
need multiple urbs per request for highspeed support, so a single
opaque pointer doesn't cut it any more anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds code to track all async urbs in a linked list,
so we can find them without having to pass around a opaque
pointer to them. Prerequisite for the cleanups.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds a hostport property which allows to specify the host usb
devices to pass through by bus number and physical port. This means you
can basically hand over one (or more) of the usb plugs on your host to
the guest and whatever device is plugged in there will show up in the
guest.
Usage:
-device usb-host,hostbus=1,hostport=1
You can figure the port numbers by plugging in some usb device, then
find it in "info usbhost" and pick bus and port specified there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The device path isn't just a number. It specifies the physical port
the device is connected to and in case the device is connected via
usb hub you'll have two numbers there, like this: "5.1". The first
specifies the root port where the hub is plugged into, the second
specifies the port number of the hub where the device is plugged in.
With multiple hubs chained the string can become longer.
This patch renames devpath to port and makes it a string. It also
adapts the sysfs parsing code accordingly. The parser code is also more
strict now and skips the root hubs (which can't be assigned anyway).
The "info usbhost" monitor command now prints bus number, (os-assigned)
device address and physical port for each device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make the linux usb host passthrough code use the usb_generic_handle_packet()
function, rather then the curent DYI code. This removes 200 lines of almost
identical code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
cppcheck report:
usb-linux.c:661: warning: Redundant assignment of "len" in switch
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Extend the iso buffering code to also buffer iso out packets, this
fixes for example using usb speakers with usb redirection.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently we reserve room for endpoint data for 16 endpoints, but given
that we only use endpoint data for endpoints 1-15, and always index the
array with the endpoint-number - 1, 15 is enough.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Refuse iso usb packets when then max packet size for the endpoint is 0,
this avoids an abort in usb_host_alloc_iso() caused by trying to qemu_malloc
a 0 bytes large buffer.
If an endpoint is not in the usb descriptor we've no idea what kind of
endpoint it is and thus how to handle it, refuse packages in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently we are submitting iso packets to the host one at a time, as we
receive them from the emulated host controller. This has 2 problems:
1) If we were fast enough to submit every packet in time for the next host host
controller usb frame, we would be generating 1000 hardware interrupts per
second on the host
2) We are not fast enough to submit every packet in time for the next host host
controller usb frame, causing us to not submit iso urbs in some usb frames
which causes devices with an endpoint with an interval of 1 ms (so every
frame) to loose data. This causes for example ubs-1.1 webcams to not work
properly (usb-2.0 is not supported at all atm).
This patch fixes both problems by changing the iso packet pass through handling
to buffer packets. This version only does so for iso input packets (webcams,
audio in) I'm working on a second patch extending this to iso output packets
(audio out).
This patch makes use of the linux batching of iso packets in one urb.
When an iso in packet gets received from the emulated host controller,
it immediately submits 3 urbs with 32 iso in packets each. This causes
the host to only get an hw interrupt every 32 packets dropping the
interrupt rate to 32 interrupts per second and gives it a queue of urbs
to work from once the first 32 iso in packets have been received to make sure
no packets are dropped.
Besides submitting a whole bunch or urbs as soon as the first urb is
received, effectively creating a buffer inside the kernel, this patch also
gets rid of the asynchroneous completion for iso in urbs. Instead they are
only marked as complete in the fd write callback (which usbfs uses to signal
complete urbs). These complete packets then get consumed by returning them
synchroneously to the emulated host controller when it submits an iso in
packet for the ep in question. When no complete packets are ready (which
happens when the stream is starting) a 0 length packet gets returned to
the emulated host controller.
With this patch I've several usb-1.1 webcams working well with usb pass
through, where as without this patch none of them work.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
At least one device I have lies when receiving a USB_REQ_GET_INTERFACE,
always returning 0 even if the alternate setting is different. This is
likely caused because in practice this control message is never used as
the operating system's usb stack knows which alternate setting it has
told the device to get into, and thus this ctrl message does not get
tested by device manufacturers.
When usb_fs_type == USB_FS_SYS, the active alt. setting can be read directly
from sysfs, which allows using this device through qemu's usb redirection.
More in general it seems a good idea to not send needless control msg's to
devices, esp. as the code in question is called every time a set_interface
is done. Which happens multiple times during virtual machine startup, and
when device drivers are activating the usb device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The next patch in this series introduces multiple ways to get the
alt setting dependent upon usb_fs_type, it is cleaner to put this
into its own function.
Note that this patch also changes the assumed alt setting in case
of an error getting the alt setting to be 0 (a sane default) rather
then the interface numberwhich makes no sense.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
