In 9c37146782 I've tried to fix a broken build with older
linux-headers. However, I didn't do it properly. The solution
implemented here is to grab the enums that caused the problem
initially, and rename their values so that they are "QEMU_"
prefixed. In order to guarantee matching values with actual
enums from linux-headers, the enums are seeded with starting
values from the original enums.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 75c14d6e8a97c4ff3931d69c13eab7376968d8b4.1471593869.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The fix I've made there was wrong. I mean, basically what I did
there was equivalent to:
#if 0
some code;
#endif
This reverts commit 9c37146782.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 40d61349e445c1ad5fef795da704bf7ed6e19c86.1471593869.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The llseek syscall takes two 32-bit arguments, offset_high
and offset_low, which must be combined to form a single
64-bit offset. Unfortunately we were combining them with
(uint64_t)arg2 << 32) | arg3
and arg3 is a signed type; this meant that when promoting
arg3 to a 64-bit type it would be sign-extended. The effect
was that if the offset happened to have bit 31 set then
this bit would get sign-extended into all of bits 63..32.
Explicitly cast arg3 to abi_ulong to avoid the erroneous
sign extension.
Reported-by: Chanho Park <parkch98@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Chanho Park <parkch98@gmail.com>
Message-id: 1470938379-1133-1-git-send-email-peter.maydell@linaro.org
In c5dff280 we tried to make us understand netlink messages more.
So we've added a code that does some translation. However, the
code assumed linux-headers to be at least version 4.4 of it
because most of the symbols there (if not all of them) were added
in just that release. This, however, breaks build on systems with
older versions of the package.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-id: 23806aac6db3baf7e2cdab4c62d6e3468ce6b4dc.1471340849.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the -version command line argument prints a string ending
with "Copyright (c) 2003-2008 Fabrice Bellard". This is now some
eight years out of date; abstract it out of the several places that
print the string and update it to:
Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers
to reflect the work by all the QEMU Project contributors over the
last decade.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1470309276-5012-1-git-send-email-peter.maydell@linaro.org
In do_brk(), we were inadvertently truncating the size
of a requested brk() from the guest by putting it into an
'int' variable. This meant that we would incorrectly report
success back to the guest rather than a failed allocation,
typically resulting in the guest then segfaulting. Use
abi_ulong instead.
This fixes a crash in the '31370.cc' test in the gcc libstdc++ test
suite (the test case starts by trying to allocate a very large
size and reduces the size until the allocation succeeds).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The target_semid_ds structure is not correct for all
architectures: the padding fields should only exist for:
* 32-bit ABIs
* x86
It is also misnamed, since it is following the kernel
semid64_ds structure (QEMU doesn't support the legacy
semid_ds structure at all). Rename the struct, provide
a correct generic definition and allow the oddball x86
architecture to provide its own version.
This fixes broken SYSV semaphores for all our 64-bit
architectures except x86 and ppc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use g_strlcpy() rather than strcpy() to copy the uname string
into the structure we return to the guest for the uname syscall.
This avoids overrunning the buffer if the user passed us an
overlong string via the QEMU command line.
We fix a comment typo while we're in the neighbourhood.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In open_self_cmdline() we look for a 0 in the buffer we read
from /prc/self/cmdline. We were incorrectly passing the length
of our buf[] array to memchr() as the length to search, rather
than the number of bytes we actually read into it, which could
be shorter. This was spotted by Coverity (because it could
result in our trying to pass a negative length argument to
write()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The AArch64 Linux ABI syscall 84 is sync_file_range, not
sync_file_range2 (in the kernel it uses the asm-generic
headers and does not define __ARCH_WANT_SYNC_FILE_RANGE2).
Update our TARGET_NR_* definitions accordingly.
This fixes the sync_file_range syscall which otherwise
gets its arguments in the wrong order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The SIOCATMARK ioctl takes an argument which should be a
pointer to an integer where the kernel will write the result.
We were incorrectly declaring it as TYPE_NULL which would mean
it would always fail (with EFAULT) when it should succeed.
Correct the type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
TIOCGPTN and related terminal control ioctls were not converted to the guest ioctl format on x86_64 targets. Convert these ioctls to enable terminal functionality on x86_64 guests.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add some new blk ioctls (these are 0x12,119 through
to 0x12,127). Several of these are used by mke2fs; this silences
the warnings:
mke2fs 1.42.12 (29-Aug-2014)
Unsupported ioctl: cmd=0x127b
Unsupported ioctl: cmd=0x127a
warning: Unable to get device geometry for /dev/loop5
Unsupported ioctl: cmd=0x127c
Unsupported ioctl: cmd=0x127c
Unsupported ioctl: cmd=0x1277
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If userspace specifies a short buffer for a target sockaddr,
the kernel will only copy in as much as it has space for
(or none at all if the length is zero) -- see the kernel
move_addr_to_user() function. Mimic this in QEMU's
host_to_target_sockaddr() routine.
In particular, this fixes a segfault running the LTP
recvfrom01 test, where the guest makes a recvfrom()
call with a bad buffer pointer and other parameters which
cause the kernel to set the addrlen to zero; because we
did not skip the attempt to swap the sa_family field we
segfaulted on the bad address.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Commit 655ed67c2a which switched synchronous signals to
benig recorded in ts->sync_signal rather than in a queue
with every other signal had a bug: we failed to clear
the flag indicating that a synchronous signal was pending
when we delivered it. This meant that we would take the signal
again and again every time the guest made a syscall.
(This is a bug introduced in my refactoring of Timothy Baldwin's
original code.)
Fix this by passing in the struct emulated_sigtable* to
handle_pending_signal(), so that we clear the pending flag
in the ts->sync_signal struct when handling a synchronous signal.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The LOOP_GET_STATUS and LOOP_GET_STATUS64 ioctls were incorrectly
defined as IOC_W rather than IOC_R, which meant we weren't
correctly copying the information back from the kernel to the guest.
The loop_info64 structure definition was also missing a member
and using the wrong type for several 32-bit fields.
In particular, this meant that "kpartx -d image.img" didn't work
and "losetup -a" behaved strangely. Correct the ioctl type definitions.
Reported-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The BLKSSZGET ioctl takes an argument which is a pointer to an int.
We were incorrectly declaring it to take a pointer to a long, which
meant that we would incorrectly write to memory which we should not
if the guest is a 64-bit architecture.
In particular, kpartx uses this ioctl to write to an int on the
stack, which tends to result in it crashing immediately.
Reported-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the /dev/loop-control ioctls:
LOOP_CTL_ADD
LOOP_CTL_REMOVE
LOOP_CTL_GET_FREE
[RV: fixed to apply to new header guards]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Many syscalls which take a sigset_t argument also take an argument
giving the size of the sigset_t. The kernel insists that this
matches its idea of the type size and fails EINVAL if it is not.
Implement this logic in QEMU. (This mostly just means some LTP test
cases which check error cases now pass.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Nested types are used by the kernel to send link information and
protocol properties.
We can see following errors with "ip link show":
Unimplemented nested type 26
Unimplemented nested type 26
Unimplemented nested type 18
Unimplemented nested type 26
Unimplemented nested type 18
Unimplemented nested type 26
This patch implements nested types 18 (IFLA_LINKINFO) and
26 (IFLA_AF_SPEC).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As we convert sockaddr for AF_PACKET family for sendto() (target to
host) we need also to convert this for getsockname() (host to target).
arping uses getsockname() to get the the interface address and uses
this address with sendto().
Tested with:
/sbin/arping -D -q -c2 -I eno1 192.168.122.88
...
getsockname(3, {sa_family=AF_PACKET, proto=0x806, if2,
pkttype=PACKET_HOST, addr(6)={1, 10c37b6b9a76}, [18]) = 0
...
sendto(3, "..." 28, 0,
{sa_family=AF_PACKET, proto=0x806, if2, pkttype=PACKET_HOST,
addr(6)={1, ffffffffffff}, 20) = 28
...
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Netlink is byte-swapping data in the guest memory (it's bad).
It's ok when the data come from the host as they are generated by the
host.
But it doesn't work when data come from the guest: the guest can
try to reuse these data whereas they have been byte-swapped.
This is what happens in glibc:
glibc generates a sequence number in nlh.nlmsg_seq and calls
sendto() with this nlh. In sendto(), we byte-swap nlmsg.seq.
Later, after the recvmsg(), glibc compares nlh.nlmsg_seq with
sequence number given in return, and of course it fails (hangs),
because nlh.nlmsg_seq is not valid anymore.
The involved code in glibc is:
sysdeps/unix/sysv/linux/check_pf.c:make_request()
...
req.nlh.nlmsg_seq = time (NULL);
...
if (TEMP_FAILURE_RETRY (__sendto (fd, (void *) &req, sizeof (req), 0,
(struct sockaddr *) &nladdr,
sizeof (nladdr))) < 0)
<here req.nlh.nlmsg_seq has been byte-swapped>
...
do
{
...
ssize_t read_len = TEMP_FAILURE_RETRY (__recvmsg (fd, &msg, 0));
...
struct nlmsghdr *nlmh;
for (nlmh = (struct nlmsghdr *) buf;
NLMSG_OK (nlmh, (size_t) read_len);
nlmh = (struct nlmsghdr *) NLMSG_NEXT (nlmh, read_len))
{
<we compare nlmh->nlmsg_seq with corrupted req.nlh.nlmsg_seq>
if (nladdr.nl_pid != 0 || (pid_t) nlmh->nlmsg_pid != pid
|| nlmh->nlmsg_seq != req.nlh.nlmsg_seq)
continue;
...
else if (nlmh->nlmsg_type == NLMSG_DONE)
/* We found the end, leave the loop. */
done = true;
}
}
while (! done);
As we have a continue on "nlmh->nlmsg_seq != req.nlh.nlmsg_seq",
"done" cannot be set to "true" and we have an infinite loop.
It's why commands like "apt-get update" or "dnf update hangs".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
fd_trans_target_to_host_data() and fd_trans_host_to_target_data() must
return the length of processed data.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed. This type is also
returned by trace_opt_parse() and used in vl.c.
--Stefan]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860251784.30668.17339867835129075077.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These headers all use QEMU_HOSTDEP_H as header guard symbol. Reuse of
the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_HOSTDEP_H for linux-user/host/$target/hostdep.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
These headers all use TARGET_STRUCTS_H as header guard symbol. Reuse
of the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_STRUCTS_H for linux-user/$target/target_structs.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse
of the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
These headers all use TARGET_CPU_H as header guard symbol. Reuse of
the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_CPU_H for linux-user/$target/target_cpu.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Some of them use guard symbol TARGET_SYSCALL_H, but we also have
CRIS_SYSCALL_H, MICROBLAZE_SYSCALLS_H, TILEGX_SYSCALLS_H and
__UC32_SYSCALL_H__. They all upset scripts/clean-header-guards.pl.
Reuse of the same guard symbol TARGET_SYSCALL_H in multiple headers is
okay as long as they cannot be included together. The script can't
tell, so it warns.
The script dislikes the other guard symbols, too. They don't match
their file name (they should, to make guard collisions less likely),
and __UC32_SYSCALL_H__ is a reserved identifier.
Clean them all up: use guard symbol $target_TARGET_SYSCALL_H for
linux-user/$target/target_sycall.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Clang insists that "cmp" is ambiguous with a memory destination,
requiring an explicit size suffix.
There was a true error in the use of .cfi_def_cfa_offset in the
epilogue, but changing to use the proper .cfi_adjust_cfa_offset
runs afoul of a clang bug wrt .cfi_restore_state. Better to
fold the two epilogues so that we don't trigger the bug.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The fields in the TaskState heap_base, heap_limit and stack_base
are all guest addresses (representing the locations of the heap
and stack for the guest binary), so they should be abi_ulong
rather than uint32_t. (This only in practice affects ARM AArch64
since all the other semihosting implementations are 32-bit.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1466783381-29506-2-git-send-email-peter.maydell@linaro.org
Older kernels don't have F_SETPIPE_SZ and F_GETPIPE_SZ (in
particular RHEL6's system headers don't define these). Add
ifdefs so that we can gracefully fall back to not supporting
those guest ioctls rather than failing to build.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 1467304429-21470-1-git-send-email-peter.maydell@linaro.org
This function needs to be converted to QOM hook and virtualised for
multi-arch. This rename interferes, as cpu-qom will not have access
to the renaming causing name divergence. This rename doesn't really do
anything anyway so just delete it.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <69bd25a8678b8b31b91cd9760c777bed1aafb44e.1437212383.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaitepeter@gmail.com>
and add safe_syscall support for i386, aarch64, arm, ppc64 and
s390x.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zonM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160628' into staging
Drop building linux-user targets on HPPA or m68k host systems
and add safe_syscall support for i386, aarch64, arm, ppc64 and
s390x.
# gpg: Signature made Tue 28 Jun 2016 19:31:16 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
# Primary key fingerprint: FF82 03C8 C391 98AE 0581 41EF B448 90DE DE3C 9BC0
* remotes/riku/tags/pull-linux-user-20160628: (24 commits)
linux-user: Provide safe_syscall for ppc64
linux-user: Provide safe_syscall for s390x
linux-user: Provide safe_syscall for aarch64
linux-user: Provide safe_syscall for arm
linux-user: Provide safe_syscall for i386
linux-user: fix x86_64 safe_syscall
linux-user: don't swap NLMSG_DATA() fields
linux-user: fd_trans_host_to_target_data() must process only received data
linux-user: add missing return in netlink switch statement
linux-user: update get_thread_area/set_thread_area strace
linux-user: fix clone() strace
linux-user: add socket() strace
linux-user: add socketcall() strace
linux-user: Support F_GETPIPE_SZ and F_SETPIPE_SZ fcntls
linux-user: Fix wrong type used for argument to rt_sigqueueinfo
linux-user: Create a hostdep.h for each host architecture
user-exec: Remove unused code for OSX hosts
user-exec: Delete now-unused hppa and m68k cpu_signal_handler() code
configure: Don't allow user-only targets for unknown CPU architectures
configure: Don't override ARCH=unknown if enabling TCI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds two events to trace syscalls in syscall emulation mode (*-user):
* guest_user_syscall: Emitted before the syscall is emulated; contains
the syscall number and arguments.
* guest_user_syscall_ret: Emitted after the syscall is emulated;
contains the syscall number and return value.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146651712411.12388.10024905980452504938.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
[RV] Updated syscall argument comment to match code
Do what the comment says, test for signal_pending non-zero,
rather than the current code which tests for bit 0 non-zero.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
If the structure pointed by NLMSG_DATA() is bigger
than the size of NLMSG_DATA(), don't swap its fields
to avoid memory corruption.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
if we process the whole buffer, the netlink helpers can try
to swap invalid data.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Support the F_GETPIPE_SZ and F_SETPIPE_SZ fcntl operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The third argument to the rt_sigqueueinfo syscall is a pointer to
a siginfo_t, not a pointer to a sigset_t. Fix the error in the
arguments to lock_user(), which meant that we would not have
detected some faults that we should.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In commit 4d330cee37 a new hostdep.h file was added, with the intent
that host architectures which needed one could provide it, and the
build system would automatically fall back to a generic version if
there was no version for the host architecture. Although this works,
it has a flaw: if a subsequent commit switches an architecture from
"uses generic/hostdep.h" to "uses its own hostdep.h" nothing in the
makefile dependencies notices this and so doing a rebuild without
a manual 'make clean' will fail.
So we drop the idea of having a 'generic' version in favour of
every architecture we support having its own hostdep.h, even if
it doesn't have anything in it. (There are only thirteen of these.)
If the dependency files claim that an object file depends on a
nonexistent file, our dependency system means that make will
rebuild the object file, and regenerate the dependencies in
the process. So moving between trees prior to this commit and
trees after this commit works without requiring a 'make clean'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The kernel and libc have different ideas about what a sigset_t
is -- for the kernel it is only _NSIG / 8 bytes in size (usually
8 bytes), but for libc it is much larger, 128 bytes. In most
situations the difference doesn't matter, because if you pass a
pointer to a libc sigset_t to the kernel it just acts on the first
8 bytes of it, but for the ucontext_t* argument to a signal handler
it trips us up. The kernel allocates this ucontext_t on the stack
according to its idea of the sigset_t type, but the type of the
ucontext_t defined by the libc headers uses the libc type, and
so do the manipulator functions like sigfillset(). This means that
(1) sizeof(uc->uc_sigmask) is much larger than the actual
space used on the stack
(2) sigfillset(&uc->uc_sigmask) will write garbage 0xff bytes
off the end of the structure, which can trash data that
was on the stack before the signal handler was invoked,
and may result in a crash after the handler returns
To avoid this, we use a memset() of the correct size to fill
the signal mask rather than using the libc function.
This fixes a problem where we would crash at least some of the
time on an i386 host when a signal was taken.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for fcntl. This is straightforward now
that we always use 'struct fcntl64' on the host, as we don't need
to select whether to call the host's fcntl64 or fcntl syscall
(a detail that the libc previously hid for us).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the __get_user() and __put_user() to handle reading and writing the
guest structures in do_ioctl(). This has two benefits:
* avoids possible errors due to misaligned guest pointers
* correctly sign extends signed fields (like l_start in struct flock)
which might be different sizes between guest and host
To do this we abstract out into copy_from/to_user functions. We
also standardize on always using host flock64 and the F_GETLK64
etc flock commands, as this means we always have 64 bit offsets
whether the host is 64-bit or 32-bit and we don't need to support
conversion to both host struct flock and struct flock64.
In passing we fix errors in converting l_type from the host to
the target (where we were doing a byteswap of the host value
before trying to do the convert-bitmasks operation rather than
otherwise, and inexplicably shifting left by 1); these were
accidentally left over when the original simple "just shift by 1"
arm<->x86 conversion of commit 43f238d was changed to the more
general scheme of using target_to_host_bitmask() functions in 2ba7f73.
[RV: fixed ifdef guard for eabi functions]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements read and write access rules for Mips floating
point control and status register (FCR31). The change can be divided
into following parts:
- Add fields that will keep FCR31's R/W bitmask in procesor
definitions and processor float_status structure.
- Add appropriate value for FCR31's R/W bitmask for each supported
processor.
- Add function for setting snan_bit_is_one, and integrate it in
appropriate places.
- Modify handling of CTC1 (case 31) instruction to use FCR31's R/W
bitmask.
- Modify handling user mode executables for Mips, in relation to the
bit EF_MIPS_NAN2008 from ELF header, that is in turn related to
reading and writing to FCR31.
- Modify gdb behavior in relation to FCR31.
Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
host_to_target_siginfo() is implemented by a combination of
host_to_target_siginfo_noswap() followed by tswap_siginfo().
The first of these two functions assumes that the target_siginfo_t
it is writing to is correctly aligned, but the pointer passed
into host_to_target_siginfo() is directly from the guest and
might be misaligned. Use a local variable to avoid this problem.
(tswap_siginfo() does now correctly handle a misaligned destination.)
We have to add a memset() to host_to_target_siginfo_noswap()
to avoid some false positive "may be used uninitialized" warnings
from gcc about subfields of the _sifields union if it chooses to
inline both tswap_siginfo() and host_to_target_siginfo_noswap()
into host_to_target_siginfo().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <riku.voipio@linaro.org>
Recent server processors use the Hypervisor Emulation Assistance
interrupt for illegal instructions and *some* type of SPR accesses.
Also the code was always generating inval instructions even for priv
violations due to setting the wrong flags
Finally, the checking for PR/HV was open coded everywhere.
This reworks it all, using little helper macros for checking, and
adding the HV interrupt (which gets converted back to program check
in the slow path of excp_helper.c on CPUs that don't want it).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Version: GnuPG v1
iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
=eUnF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request: (42 commits)
trace: split out trace events for linux-user/ directory
trace: split out trace events for qom/ directory
trace: split out trace events for target-ppc/ directory
trace: split out trace events for target-s390x/ directory
trace: split out trace events for target-sparc/ directory
trace: split out trace events for net/ directory
trace: split out trace events for audio/ directory
trace: split out trace events for ui/ directory
trace: split out trace events for hw/alpha/ directory
trace: split out trace events for hw/arm/ directory
trace: split out trace events for hw/acpi/ directory
trace: split out trace events for hw/vfio/ directory
trace: split out trace events for hw/s390x/ directory
trace: split out trace events for hw/pci/ directory
trace: split out trace events for hw/ppc/ directory
trace: split out trace events for hw/9pfs/ directory
trace: split out trace events for hw/i386/ directory
trace: split out trace events for hw/isa/ directory
trace: split out trace events for hw/sd/ directory
trace: split out trace events for hw/sparc/ directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all trace-events for files in the linux-user/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 1466066426-16657-41-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When qemu_set_log_filename() detects an invalid file name, it reports
an error, closes the log file (if any), and starts logging to stderr
(unless daemonized or nothing is being logged).
This is wrong. Asking for an invalid log file on the command line
should be fatal. Asking for one in the monitor should fail without
messing up an existing logfile.
Fix by converting qemu_set_log_filename() to Error. Pass it
&error_fatal, except for hmp_logfile report errors.
This also permits testing without a subprocess, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1466011636-6112-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAV1gdMrRIkN7ePJvAAQhLcg/+Kby99taEuewItrA1yDs75jxOlLqaJopd
cVzo4LFRFPhIn4UEKqRQS0CGoIeU/DYOmObvuUzJxs2LyUoHoqmQOwEm5obC2a85
JrHo/NOppYBbyvvIEAAXzZDCZo0KZKVclrlT+AX5obpOSNSvAnKvEuLWq1aQ9WGN
n4AzHuFEl885cd4nFd8VK/xth89bqz6U/z8CjgIuw3mczp1XNrK5IJJwAy5epHay
GCBr9XHooW3SU971WS20RTRS0D33tKPHgCU3ZeZ3rKh4g3JNj6/ixdVgzi9NqFsQ
5DzAj/iBGhN1LtCOednRS6tUt32Bhy8G/g4O3GiXdejagAmNe2wz31cveNJ8S3W5
DK8SZAnJlz06zN5uIpOVQgDOqfXZkCp7ndq779QJoHOAnuOjJBcUbhw1myz2R3eR
6208tStWl3R0+ATEK8CZ7ejg1cUHvdzyqGJA+1nC2HaFUrBWipxN8jf2fz9vO/wG
G7zNbahvVgyJWO7bPNK4mxkb6qkWCETnCnLJsq2ZbmtPEMcINjD8vNWLNvFGVG8b
2HbinDrzh0Z9Zik5gLZfiVyP5HFaWSrJn9QRVIgaUjuIH9n3/25sl9OvW/JLjxJ+
h2P17CLnAK6dhUYc4R3wQTx2X/N2FvO4DD8iMYOcgDY6fhZ2b6EEyE9yBgQrIDbF
gU1AlC/CX+M=
=AXqa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160608' into staging
linux-user pull request for June 2016
# gpg: Signature made Wed 08 Jun 2016 14:27:14 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20160608: (44 commits)
linux-user: In fork_end(), remove correct CPUs from CPU list
linux-user: Special-case ERESTARTSYS in target_strerror()
linux-user: Make target_strerror() return 'const char *'
linux-user: Correct signedness of target_flock l_start and l_len fields
linux-user: Use safe_syscall wrapper for ioctl
linux-user: Use safe_syscall wrapper for accept and accept4 syscalls
linux-user: Use safe_syscall wrapper for semop
linux-user: Use safe_syscall wrapper for epoll_wait syscalls
linux-user: Use safe_syscall wrapper for poll and ppoll syscalls
linux-user: Use safe_syscall wrapper for sleep syscalls
linux-user: Use safe_syscall wrapper for rt_sigtimedwait syscall
linux-user: Use safe_syscall wrapper for flock
linux-user: Use safe_syscall wrapper for mq_timedsend and mq_timedreceive
linux-user: Use safe_syscall wrapper for msgsnd and msgrcv
linux-user: Use safe_syscall wrapper for send* and recv* syscalls
linux-user: Use safe_syscall wrapper for connect syscall
linux-user: Use safe_syscall wrapper for readv and writev syscalls
linux-user: Fix error conversion in 64-bit fadvise syscall
linux-user: Fix NR_fadvise64 and NR_fadvise64_64 for 32-bit guests
linux-user: Fix handling of arm_fadvise64_64 syscall
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
configure
scripts/qemu-binfmt-conf.sh
In fork_end(), we must fix the list of current CPUs to match the fact
that the child of the fork has only one thread. Unfortunately we were
removing the wrong CPUs from the list, which meant that if the child
subsequently did an exclusive operation it would deadlock in
start_exclusive() waiting for a sibling CPU which didn't exist.
In particular this could cause hangs doing git submodule init
operations, as reported in https://bugs.launchpad.net/qemu/+bug/955379
comment #47.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Since TARGET_ERESTARTSYS and TARGET_ESIGRETURN are internal-to-QEMU
error numbers, handle them specially in target_strerror(), to avoid
confusing strace output like:
9521 rt_sigreturn(14,8,274886297808,8,0,268435456) = -1 errno=513 (Unknown error 513)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Make target_strerror() return 'const char *' rather than just 'char *';
this will allow us to return constant strings from it for some special
cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
The l_start and l_len fields in the various target_flock structures are
supposed to be '__kernel_off_t' or '__kernel_loff_t', which means they
should be signed, not unsigned. Correcting the structure definitions means
that __get_user() and __put_user() will correctly sign extend them if
the guest is using 32 bit offsets and the host is using 64 bit offsets.
This fixes failures in the LTP 'fcntl14' tests where it checks that
negative seek offsets work correctly.
We reindent the structures to drop hard tabs since we're touching 40%
of the fields anyway.
RV: long long -> abi_llong as suggested by Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper to implement the ioctl syscall.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the accept and accept4 syscalls.
accept4 has been in the kernel since 2.6.28 so we can assume it
is always present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the semop syscall or IPC operation.
(We implement via the semtimedop syscall to make it easier to
implement the guest semtimedop syscall later.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for epoll_wait and epoll_pwait syscalls.
Since we now directly use the host epoll_pwait syscall for both
epoll_wait and epoll_pwait, we don't need the configure machinery
to check whether glibc supports epoll_pwait(). (The kernel has
supported the syscall since 2.6.19 so we can assume it's always there.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the poll and ppoll syscalls.
Since not all host architectures will have a poll syscall, we
have to rewrite the TARGET_NR_poll handling to use ppoll instead
(we can assume everywhere has ppoll by now).
We take the opportunity to switch to the code structure
already used in the implementation of epoll_wait and epoll_pwait,
which uses a switch() to avoid interleaving #if and if (),
and to stop using a variable with a leading '_' which is in
the implementation's namespace.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the clock_nanosleep and nanosleep
syscalls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the rt_sigtimedwait syscall.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the flock syscall.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for mq_timedsend and mq_timedreceive syscalls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for msgsnd and msgrcv syscalls.
This is made slightly awkward by some host architectures providing
only a single 'ipc' syscall rather than separate syscalls per
operation; we provide safe_msgsnd() and safe_msgrcv() as wrappers
around safe_ipc() to handle this if needed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the send, sendto, sendmsg, recv,
recvfrom and recvmsg syscalls.
RV: adjusted to apply
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the connect syscall.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for readv and writev syscalls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fix errors in the implementation of NR_fadvise64 and NR_fadvise64_64
for 32-bit guests, which pass their off_t values in register pairs.
We can't use the 64-bit code path for this, so split out the 32-bit
cases, so that we can correctly handle the "only offset is 64-bit"
and "both offset and length are 64-bit" syscall flavours, and
"uses aligned register pairs" and "does not" flavours of target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
32-bit ARM has an odd variant of the fadvise syscall which has
rearranged arguments, which we try to implement. Unfortunately we got
the rearrangement wrong.
This is a six-argument syscall whose arguments are:
* fd
* advise parameter
* offset high half
* offset low half
* len high half
* len low half
Stop trying to share code with the standard fadvise syscalls,
and just implement the syscall with the correct argument order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use cfi directives in the x86-64 safe_syscall to allow gdb to get
backtraces right from within it. (In particular this will be
quite a common situation if the user interrupts QEMU while it's
in a blocked safe-syscall: at the point of the syscall insn RBP
is in use for something else, and so gdb can't find the frame then
without assistance.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).
This patch is the result of coccinelle script
scripts/coccinelle/round.cocci
CC: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The siginfo_t struct includes a union. The correct way to identify
which fields of the union are relevant is complicated, because we
have to use a combination of the si_code and si_signo to figure out
which of the union's members are valid. (Within the host kernel it
is always possible to tell, but the kernel carefully avoids giving
userspace the high 16 bits of si_code, so we don't have the
information to do this the easy way...) We therefore make our best
guess, bearing in mind that a guest can spoof most of the si_codes
via rt_sigqueueinfo() if it likes. Once we have made our guess, we
record it in the top 16 bits of the si_code, so that tswap_siginfo()
later can use it. tswap_siginfo() then strips these top bits out
before writing si_code to the guest (sign-extending the lower bits).
This fixes a bug where fields were sometimes wrong; in particular
the LTP kill10 test went into an infinite loop because its signal
handler got a si_pid value of 0 rather than the pid of the sending
process.
As part of this change, we switch to using __put_user() in the
tswap_siginfo code which writes out the byteswapped values to
the target memory, in case the target memory pointer is not
sufficiently aligned for the host CPU's requirements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If there is a signal pending during fork() the signal handler will
erroneously be called in both the parent and child, so handle any
pending signals first.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-20-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the kill, tkill and tgkill syscalls.
Without this, if a thread sent a SIGKILL to itself it could kill the
thread before we had a chance to process a signal that arrived just
before the SIGKILL, and that signal would get lost.
We drop all the ifdeffery for tkill and tgkill, because every guest
architecture we support implements them, and they've been in Linux
since 2003 so we can assume the host headers define the __NR_tkill
and __NR_tgkill constants.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Without this a signal could vanish on thread exit.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-26-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fix races between signal handling and the pause syscall by
reimplementing it using block_signals() and sigsuspend().
(Using safe_syscall(pause) would also work, except that the
pause syscall doesn't exist on all architectures.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-28-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Block signals while emulating sigaction. This is a non-interruptible
syscall, and using block_signals() avoids races where the host
signal handler is invoked and tries to examine the signal handler
data structures while we are updating them.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-29-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: expanded commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If a synchronous signal and an asynchronous signal arrive near simultaneously,
and the signal number of the asynchronous signal is lower than that of the
synchronous signal the the handler for the asynchronous would be called first,
and then the handler for the synchronous signal would be called within or
after the first handler with an incorrect context.
This is fixed by queuing synchronous signals separately. Note that this does
risk delaying a asynchronous signal until the synchronous signal handler
returns rather than handling the signal on another thread, but this seems
unlikely to cause problems for real guest programs and is unavoidable unless
we could guarantee to roll back and reexecute whatever guest instruction
caused the synchronous signal (which would be a bit odd if we've already
logged its execution, for instance, and would require careful analysis of
all guest CPUs to check it was possible in all cases).
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-24-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: added a comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As host signals are now blocked whenever guest signals are blocked, the
queue of realtime signals is now in Linux. The QEMU queue is now
redundant and can be removed. (We already did not queue non-RT signals, and
none of the calls to queue_signal() except the one in host_signal_handler()
pass an RT signal number.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-23-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: minor commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Both queue_signal() and process_pending_signals() did check for default
actions of signals, this is redundant and also causes fatal and stopping
signals to incorrectly cause guest system calls to be interrupted.
The code in queue_signal() is removed.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-21-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If multiple host signals are received in quick succession they would
be queued in TaskState then delivered to the guest in spite of
signals being supposed to be blocked by the guest signal handler's
sa_mask. Fix this by decoupling the guest signal mask from the
host signal mask, so we can have protected sections where all
host signals are blocked. In particular we block signals from
when host_signal_handler() queues a signal from the guest until
process_pending_signals() has unqueued it. We also block signals
while we are manipulating the guest signal mask in emulation of
sigprocmask and similar syscalls.
Blocking host signals also ensures the correct behaviour with respect
to multiple threads and the overrun count of timer related signals.
Alas blocking and queuing in qemu is still needed because of virtual
processor exceptions, SIGSEGV and SIGBUS.
Blocking signals inside process_pending_signals() protects against
concurrency problems that would otherwise happen if host_signal_handler()
ran and accessed the signal data structures while process_pending_signals()
was manipulating them.
Since we now track the guest signal mask separately from that
of the host, the sigsuspend system calls must track the signal
mask passed to them, because when we process signals as we leave
the sigsuspend the guest signal mask in force is that passed to
sigsuspend.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-19-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: make signal_pending a simple flag rather than a word with two flag bits;
ensure we don't call block_signals() twice in sigreturn codepaths;
document and assert() the guarantee that using do_sigprocmask() to
get the current mask never fails; use the qemu atomics.h functions
rather than raw volatile variable access; add extra commentary and
documentation; block SIGSEGV/SIGBUS in block_signals() and in
process_pending_signals() because they can't occur synchronously here;
check the right do_sigprocmask() call for errors in ssetmask syscall;
expand commit message; fixed sigsuspend() hanging]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for sigsuspend syscalls. This
means that we will definitely deliver a signal that arrives
before we do the sigsuspend call, rather than blocking first
and delivering afterwards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some host syscalls take an argument specifying the size of a
host kernel's sigset_t (which isn't necessarily the same as
that of the host libc's type of that name). Instead of hardcoding
_NSIG / 8 where we do this, define and use a SIGSET_T_SIZE macro.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
All the architecture specific handlers for sigreturn include calls
to do_sigprocmask(SIGSETMASK, &set, NULL) to set the signal mask
from the uc_sigmask in the context being restored. Factor these
out into calls to a set_sigmask() function. The next patch will
want to add code which is not run when setting the signal mask
via do_sigreturn, and this change allows us to separate the two
cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fix a stray tab-indented linux in linux-user/signal.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Move the handle_pending_signal() function above process_pending_signals()
to avoid the need for a forward declaration. (Whitespace only change.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Factor out the code to handle a single signal from the
process_pending_signals() function. The use of goto for flow control
is OK currently, but would get significantly uglier if extended to
allow running the handle_signal code multiple times.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently, if not specified in "./configure", QEMU_PKGVERSION will be
empty. Write a rule in Makefile to generate a value from "git describe"
combined with a possible git tree cleanness suffix, and write into a new
header.
$ cat qemu-version.h
#define QEMU_PKGVERSION "-v2.6.0-557-gd6550e9-dirty"
Include the header in .c files where the macro is referenced. It's not
necessary to include it in all files, otherwise each time the content of
the file changes, all sources have to be recompiled.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464774261-648-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some IFLA_* symbols can be missing in the host linux/if_link.h,
but as they are enums and not "#defines", check in "configure" if
last known (IFLA_PROTO_DOWN) is available and if not, disable
management of NETLINK_ROUTE protocol.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This is, for instance, needed to log in a container.
Without this, the user cannot be identified and the console login
fails with "Login incorrect".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This is the protocol used by udevd to manage kernel events.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
rtnetlink is needed to use iproute package (ip addr, ip route)
and dhcp client.
Examples:
Without this patch:
# ip link
Cannot open netlink socket: Address family not supported by protocol
# ip addr
Cannot open netlink socket: Address family not supported by protocol
# ip route
Cannot open netlink socket: Address family not supported by protocol
# dhclient eth0
Cannot open netlink socket: Address family not supported by protocol
Cannot open netlink socket: Address family not supported by protocol
With this patch:
# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT qlen 1000
link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
# ip addr show eth0
51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.197/24 brd 192.168.122.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::216:3eff:fe89:6bd7/64 scope link
valid_lft forever preferred_lft forever
# ip route
default via 192.168.122.1 dev eth0
192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.197
# ip addr flush eth0
# ip addr add 192.168.122.10 dev eth0
# ip addr show eth0
51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.10/32 scope global eth0
valid_lft forever preferred_lft forever
# ip route add 192.168.122.0/24 via 192.168.122.10
# ip route
192.168.122.0/24 via 192.168.122.10 dev eth0
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
setup_frame()/setup_rt_frame()/restore_user_regs() are using
MSR_LE as the similar kernel functions do: as a bitmask.
But in QEMU, MSR_LE is a bit position, so change this
accordingly.
The previous code was doing nothing as MSR_LE is 0,
and "env->msr &= ~MSR_LE" doesn't change the value of msr.
And yes, a user process can change its endianness,
see linux kernel commit:
fab5db9 [PATCH] powerpc: Implement support for setting little-endian mode via prctl
and prctl(2): PR_SET_ENDIAN, PR_GET_ENDIAN
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The return address is in target space, so the restorer address needs to
be target space, too.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
The return address is in target space, so the restorer address needs to
be target space, too.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Original implementation uses do_rt_sigreturn directly in host space,
when a guest program is in unwind procedure in guest space, it will get
an incorrect restore address, then causes unwind failure.
Also cleanup the original incorrect indentation.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The #defines of ARM_cpsr and friends in linux-user/arm/target-syscall.h
can clash with versions in the system headers if building on an
ARM or AArch64 build (though this seems to be dependent on the version
of the system headers). The QEMU defines are not very useful (it's
not clear that they're intended for use with the target_pt_regs struct
rather than (say) the CPUARMState structure) and we only use them in one
function in elfload.c anyway. So just remove the #defines and directly
access regs->uregs[].
Reported-by: Christopher Covington <cov@codeaurora.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
On Linux the setuid(), setgid(), etc system calls have different semantics
from the libc functions. The libc functions follow POSIX and update the
credentials for all threads in the process; the system calls update only
the thread which makes the call. (This impedance mismatch is worked around
in libc by signalling all threads to tell them to do a syscall, in a
byzantine and fragile way; see http://ewontfix.com/17/.)
Since in linux-user we are trying to emulate the system call semantics,
we must implement all these syscalls to directly call the underlying
host syscall, rather than calling the host libc function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 64-bit x86 syscall ABI uses 32-bit UIDs; only define
USE_UID16 for 32-bit x86.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In do_msgrcv() we want to allocate a message buffer, whose size
is passed to us by the guest. That means we could legitimately
fail, so use g_try_malloc() and handle the error case, in the same
way that do_msgsnd() does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The msgrcv ABI is a bit odd -- the msgsz argument is a size_t, which is
unsigned, but it must fail EINVAL if the value is negative when cast
to a long. We were incorrectly passing the value through an
"unsigned int", which meant that if the guest was 32-bit longs and
the host was 64-bit longs an input of 0xffffffff (which should trigger
EINVAL) would simply be passed to the host msgrcv() as 0xffffffff,
where it does not cause the host kernel to reject it.
Follow the same approach as do_msgsnd() in using a ssize_t and
doing the check for negative values by hand, so we correctly fail
in this corner case.
This fixes the msgrcv03 Linux Test Project test case, which otherwise
hangs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In a struct timespec, both fields are signed longs. Converting
them from guest to host with code like
host_ts->tv_sec = tswapal(target_ts->tv_sec);
mishandles negative values if the guest has 32-bit longs and
the host has 64-bit longs because tswapal()'s return type is
abi_ulong: the assignment will zero-extend into the host long
type rather than sign-extending it.
Make the conversion routines use __get_user() and __set_user()
instead: this automatically picks up the signedness of the
field type and does the correct kind of sign or zero extension.
It also handles the possibility that the target struct is not
sufficiently aligned for the host's requirements.
In particular, this fixes a hang when running the Linux Test Project
mq_timedsend01 and mq_timedreceive01 tests: one of the test cases
sets the timeout to -1 and expects an EINVAL failure, but we were
setting a very long timeout instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the futex syscall.
In particular, this fixes hangs when using programs that link
against the Boehm garbage collector, including the Mono runtime.
(We don't change the sys_futex() call in the implementation of
the exit syscall, because as the FIXME comment there notes
that should be handled by disabling signals, since we can't
easily back out if the futex were to return ERESTARTSYS.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the pselect and select syscalls.
Since not every architecture has the select syscall, we now
have to implement select in terms of pselect, which means doing
timeval<->timespec conversion.
(Five years on from the initial patch that added pselect support
to QEMU and a decade after pselect6 went into the kernel, it seems
safe to not try to support hosts with header files which don't
define __NR_pselect6.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Wrap execve() in the safe-syscall handling. Although execve() is not
an interruptible syscall, it is a special case: if we allow a signal
to happen before we make the host$ syscall then we will 'lose' it,
because at the point of execve the process leaves QEMU's control. So
we use the safe syscall wrapper to ensure that we either take the
signal as a guest signal, or else it does not happen before the
execve completes and makes it the other program's problem.
The practical upshot is that without this SIGTERM could fail to
terminate the process.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-25-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: expanded commit message to explain in more detail why this is
needed, and add comment about it too]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use safe_syscall for waitpid, waitid and wait4 syscalls. Note that this
change allows us to implement support for waitid's fifth (rusage) argument
in future; for the moment we ignore it as we have done up til now.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-18-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Adjust to new safe_syscall convention. Add fifth waitid syscall argument
(which isn't present in the libc interface but is in the syscall ABI)]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Restart open() and openat() if signals occur before,
or during with SA_RESTART.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-17-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Adjusted to follow new -1-and-set-errno safe_syscall convention]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Restart read() and write() if signals occur before, or during with SA_RESTART
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-15-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Update to new safe_syscall() convention of setting errno]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If a signal is delivered immediately before a blocking system call the
handler will only be called after the system call returns, which may be a
long time later or never.
This is fixed by using a function (safe_syscall) that checks if a guest
signal is pending prior to making a system call, and if so does not call the
system call and returns -TARGET_ERESTARTSYS. If a signal is received between
the check and the system call host_signal_handler() rewinds execution to
before the check. This rewinding has the effect of closing the race window
so that safe_syscall will reliably either (a) go into the host syscall
with no unprocessed guest signals pending or or (b) return
-TARGET_ERESTARTSYS so that the caller can deal with the signals.
Implementing this requires a per-host-architecture assembly language
fragment.
This will also resolve the mishandling of the SA_RESTART flag where
we would restart a host system call and not call the guest signal handler
until the syscall finally completed -- syscall restarting now always
happens at the guest syscall level so the guest signal handler will run.
(The host syscall will never be restarted because if the host kernel
rewinds the PC to point at the syscall insn for a restart then our
host_signal_handler() will see this and arrange the guest PC rewind.)
This commit contains the infrastructure for implementing safe_syscall
and the assembly language fragment for x86-64, but does not change any
syscalls to use it.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-14-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM:
* Avoid having an architecture if-ladder in configure by putting
linux-user/host/$(ARCH) on the include path and including
safe-syscall.inc.S from it
* Avoid ifdef ladder in signal.c by creating new hostdep.h to hold
host-architecture-specific things
* Added copyright/license header to safe-syscall.inc.S
* Rewrote commit message
* Added comments to safe-syscall.inc.S
* Changed calling convention of safe_syscall() to match syscall()
(returns -1 and host error in errno on failure)
* Added a long comment in qemu.h about how to use safe_syscall()
to implement guest syscalls.
]
RV: squashed Peters "fixup! linux-user: compile on non-x86-64 hosts"
patch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If DEBUG_ERESTARTSYS is set restart all system calls once. This
is pure debug code for exercising the syscall restart code paths
in the per-architecture cpu main loops.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-10-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Add comment and a commented-out #define next to the commented-out
generic DEBUG #define; remove the check on TARGET_USE_ERESTARTSYS;
tweak comment message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the Microblaze main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Note that this in passing fixes a bug where we were corrupting
the guest r[3] on sigreturn with the guest's r[10] because
do_sigreturn() was returning env->regs[10] but the register for
syscall return values is env->regs[3].
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-11-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define;
drop whitespace changes]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
All syscall exits on microblaze result in r14 being equal to the
PC we return to, because the kernel syscall exit instruction "rtbd"
does this. (This is true even for sigreturn(); note that r14 is
not a userspace-usable register as the kernel may clobber it at
any point.)
Emulate the setting of r14 on exit; this isn't really a guest
visible change for valid guest code because r14 isn't reliably
observable anyway. However having the code and the comment helps
to explain why it's ok for the ERESTARTSYS handling not to undo
the changes to r14 that happen on syscall entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the tilegx main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* return -TARGET_QEMU_ESIGRETURN from sigreturn rather than current R_RE
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Note that this fixes a bug where a sigreturn which happened to have
an errno value in TILEGX_R_RE would incorrectly cause TILEGX_R_ERR
to get set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the CRIS main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-34-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the S390 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-33-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; remove stray double semicolon; drop
TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the M68K main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-32-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the OpenRISC main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't implement sigreturn on this target so there is no
code there to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-31-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the UniCore32 main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't support signals on this target so there is no sigreturn code
to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-30-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the Alpha main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-13-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define;
PC is env->pc, not env->ir[IR_PV]]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the SH4 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-12-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the SPARC main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-9-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the 32-bit and 64-bit ARM main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-6-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the x86 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code rather than passing it
back out as the "return code" from do_sigreturn()
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch EAX
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-5-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently we define a QEMU-internal errno TARGET_QEMU_ESIGRETURN
only on the MIPS and PPC targets; move this to errno_defs.h
so it is available for all architectures, and renumber it to 513.
We pick 513 because this is safe from future use as a system call return
value: Linux uses it as ERESTART_NOINTR internally and never allows that
errno to escape to userspace.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-4-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: TARGET_ERESTARTSYS split out into preceding patch, add comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Define TARGET_ERESTARTSYS; like the kernel, we will use this to
indicate that a guest system call should be restarted. We use
the same value the kernel does for this, 512.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
[PMM: split out from the patch which moves and renumbers
TARGET_QEMU_ESIGRETURN, add comment on usage]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some of the signal handling was a mess with a mixture of tabs and 8 space
indents.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-3-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: just rebased]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The function do_openat() is not consistent about whether it is
returning a host errno or a guest errno in case of failure.
Standardise on returning -1 with errno set (ie caller has
to call get_errno()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
x86_cpudef_init() doesn't do anything anymore, cpudef_init(),
cpudef_setup(), and x86_cpudef_init() can be finally removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This decouples logging further from config-target.h
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new-in-ARMv8 YIELD instruction has been implemented to throw
an EXCP_YIELD back up to the QEMU main loop. In system emulation
we use this to decide to schedule a different guest CPU in SMP
configurations. In usermode emulation there is nothing to do,
so just ignore it and resume the guest.
This prevents an abort with "unhandled CPU exception 0x10004"
if the guest process uses the YIELD instruction.
Reported-by: Hunter Laux <hunterlaux@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1456833171-31900-1-git-send-email-peter.maydell@linaro.org
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The windows socket functions look identical to the normal POSIX
sockets functions, but instead of setting errno, the caller needs
to call WSAGetLastError(). QEMU has tried to deal with this
incompatibility by defining a socket_error() method that callers
must use that abstracts the difference between WSAGetLastError()
and errno.
This approach is somewhat error prone though - many callers of
the sockets functions are just using errno directly because it
is easy to forget the need use a QEMU specific wrapper. It is
not always immediately obvious that a particular function will
in fact call into Windows sockets functions, so the dev may not
even realize they need to use socket_error().
This introduces an alternative approach to portability inspired
by the way GNULIB fixes portability problems. We use a macro to
redefine the original socket function names to refer to a QEMU
wrapper function. The wrapper function calls the original Win32
sockets method and then sets errno from the WSAGetLastError()
value.
Thus all code can simply call the normal POSIX sockets APIs are
have standard errno reporting on error, even on Windows. This
makes the socket_error() method obsolete.
We also bring closesocket & ioctlsocket into this approach. Even
though they are non-standard Win32 names, we can't wrap the normal
close/ioctl methods since there's no reliable way to distinguish
between a file descriptor and HANDLE in Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now that CPSR.E is set correctly, prepare for when setend will be able
to change it; bswap data in and out of strex manually by comparing
SCTLR.B, CPSR.E and TARGET_WORDS_BIGENDIAN (we do not have the luxury
of using TCGMemOps).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ PC changes:
* Moved SCTLR/CPSR logic to arm_cpu_data_is_big_endian
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If doing big-endian linux-user mode, set both the CPSR.E and SCTLR.E0E
bits. This sets big-endian mode for data accesses.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bswap_code is a CPU property of sorts ("is the iside endianness the
opposite way round to TARGET_WORDS_BIGENDIAN?") but it is not the
actual CPU state involved here which is SCTLR.B (set for BE32
binaries, clear for BE8).
Replace bswap_code with SCTLR.B, and pass that to arm_ld*_code.
The next patches will make data fetches honor both SCTLR.B and
CPSR.E appropriately.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PC changes:
* rebased on master (Jan 2016)
* s/TARGET_USER_ONLY/CONFIG_USER_ONLY
* Use bswap_code() for disas_set_info() instead of raw sctlr_b
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This matches the idiom used by get_user_data_* later in the series,
and will help when bswap_code will be replaced by SCTLR.B.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When linux-user code is calling cpsr_write(), use a restrictive
mask to ensure we are limiting the set of CPSR bits we update.
In particular, don't allow the mode bits to be changed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-5-git-send-email-peter.maydell@linaro.org
Add an argument to cpsr_write() to indicate what kind of CPSR
write is being requested, since the exact behaviour should
differ for the different cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org
getrandom() has been introduced in kernel 3.17 and is now used during
the boot sequence of Debian unstable (stretch/sid).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
x86, m68k, ppc, sh4 and sparc failed to enable timerfd, because they
didn't have timerfd_create system call defined. Instead QEMU
defined timerfd syscall. Checking with kernel sources, it appears
kernel developers reused timerfd syscall number with timerfd_create,
presumably since no userspace called the old syscall number.
Reported-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU lists deprecated system call numbers in for Aarch64. These
are never enabled for Linux kernel, so don't define them in Qemu
either. Remove the ifdef around host_to_target_stat64 since
all architectures need it now.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Sync syscall numbers to match the linux v4.5-rc1 kernel.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Our implementation of shmat() and shmdt() for linux-user was
using "zero guest address" as its marker for "entry in the
shm_regions[] array is not in use". This meant that if the
guest did a shmdt(0) we would match on an unused array entry
and call page_set_flags() with both start and end addresses zero,
which causes an assertion failure.
Use an explicit in_use flag to manage the shm_regions[] array,
so that we avoid this problem.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Pavel Shamis <pasharesearch@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Set the default to the latest CPU version to have the
largest set of available features.
It is also really needed in little-endian mode because
POWER7 is not really supported in this mode and some distros
(at least debian) generate POWER8 code for their ppc64le target.
Fixes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=813698
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This fixes double-definitions in linux-user builds when using the UST
tracing backend (which indirectly includes the system's "syscall.h").
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
target_fd_trans is an array of "TargetFdTrans *": compute size
accordingly. Use g_renew() as proposed by Paolo.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Split the bits that require it to exec/log.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-10-git-send-email-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WeIo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160111' into staging
January 2016 Linux-user queque
# gpg: Signature made Mon 11 Jan 2016 14:13:57 GMT using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20160111:
linux-user/mmap.c: Use end instead of real_end in target_mmap
linux-user: Add SOCKOP_sendmmsg and SOCKOP_recvmmsg socket call, wire them up.
linux-user: Update m68k syscall definitions to match Linux 4.4.
linux-user/syscall.c: Use SOL_SOCKET instead of level for setsockopt()
linux-user: enable sigaltstack for all architectures
unicore32: convert get_sp_from_cpustate from macro to inline
linux-user/mmap.c: Always zero MAP_ANONYMOUS memory in mmap_frag()
linux-user,sh4: fix signal retcode address
linux-user: check fd is >= 0 in fd_trans_host_to_target_data/fd_trans_host_to_target_addr
linux-user: manage bind with a socket of SOCK_PACKET type.
linux-user: add a function hook to translate sockaddr
linux-user: rename TargetFdFunc to TargetFdDataFunc, and structure fields accordingly
linux-user: SOCK_PACKET uses network endian to encode protocol in socket()
linux-user/syscall.c: malloc()/calloc() to g_malloc()/g_try_malloc()/g_new0()
linux-user: in poll(), if nfds is 0, pfd can be NULL
linux-user: correctly align target_epoll_event
linux-user: add signalfd/signalfd4 syscalls
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The fragment must effectively be mapped only to "end" not to "real_end"
(which is a host page aligned address, and thus this is not a fragment).
It is consistent with what it is done in the case of one single page.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Adds the definitions for the socket calls SOCKOP_sendmmsg
and SOCKOP_recvmmsg and wires them up with the rest of the code.
The necessary function do_sendrecvmmsg() is already present in
linux-user/syscall.c. After adding these two definitions and wiring
them up, I no longer receive an error message about the
unimplemented socket calls when running "apt-get update" on Debian
unstable running on qemu with glibc_2.21 on m68k.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In this case, level is TARGET_SOL_SOCKET, but we need SOL_SOCKET for
setsockopt().
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This change covers arm, aarch64, mips. Others to follow?
The change was prompted by QEMU warning about a syscall 384 (get_random())
with Debian armhf binaries (ARMv7).
Signed-off-by: Johan Ouwerkerk <jm.ouwerkerk@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is no reason to limit sigaltstack syscall to just a few
architectures and pretend it is not implemented for others.
If some architecture is not ready for this, that architecture
should be fixed instead.
This fixes LP#1516408.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
All other architectures define get_sp_from_cpustate as an inline function,
only unicore32 uses a #define. With this, some usages are impossible, for
example, enabling sigaltstack in linux-user/syscall.c results in
linux-user/syscall.c: In function ‘do_syscall’:
linux-user/syscall.c:8299:39: error: dereferencing ‘void *’ pointer [-Werror]
get_sp_from_cpustate(arg1, arg2, get_sp_from_cpustate((CPUArchState *)cpu_env));
^
linux-user/syscall.c:8299:39: error: request for member ‘regs’ in something not a structure or union
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
There is no reason to limit sigaltstack syscall to just a few
architectures and pretend it is not implemented for others.
If some architecture is not ready for this, that architecture
should be fixed instead.
This fixes LP#1516408.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
All other architectures define get_sp_from_cpustate as an inline function,
only unicore32 uses a #define. With this, some usages are impossible, for
example, enabling sigaltstack in linux-user/syscall.c results in
linux-user/syscall.c: In function ‘do_syscall’:
linux-user/syscall.c:8299:39: error: dereferencing ‘void *’ pointer [-Werror]
get_sp_from_cpustate(arg1, arg2, get_sp_from_cpustate((CPUArchState *)cpu_env));
^
linux-user/syscall.c:8299:39: error: request for member ‘regs’ in something not a structure or union
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When mapping MAP_ANONYMOUS memory fragments, still need notice about to
set it zero, or it will cause issues.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
To return from a signal, setup_frame() puts an instruction to
be executed in the stack. This sequence calls the syscall sigreturn().
The address of the instruction must be set in the PR register
to be executed.
This patch fixes this: the current code sets the register to the address
of the instruction in the host address space (which can be 64bit whereas
PR is only 32bit), but the virtual CPU can't access this address space,
so we put in PR the address of the instruction in the guest address space.
This patch also removes an useless variable (ret) in the modified functions.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This is obsolete, but if we want to use dhcp with an old distro (like debian
etch), we need it. Some users (like dhclient) use SOCK_PACKET with AF_PACKET
and the kernel allows that.
packet(7)
In Linux 2.0, the only way to get a packet socket was by calling
socket(AF_INET, SOCK_PACKET, protocol). This is still supported but
strongly deprecated. The main difference between the two methods is
that SOCK_PACKET uses the old struct sockaddr_pkt to specify an inter‐
face, which doesn't provide physical layer independence.
struct sockaddr_pkt {
unsigned short spkt_family;
unsigned char spkt_device[14];
unsigned short spkt_protocol;
};
spkt_family contains the device type, spkt_protocol is the IEEE 802.3
protocol type as defined in <sys/if_ether.h> and spkt_device is the
device name as a null-terminated string, for example, eth0.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
in PACKET(7) :
packet_socket = socket(AF_PACKET, int socket_type, int protocol);
[...]
protocol is the IEEE 802.3 protocol
number in network order. See the <linux/if_ether.h> include file for a
list of allowed protocols. When protocol is set to htons(ETH_P_ALL)
then all protocols are received. All incoming packets of that protocol
type will be passed to the packet socket before they are passed to the
protocols implemented in the kernel.
[...]
Compatibility
In Linux 2.0, the only way to get a packet socket was by calling
socket(AF_INET, SOCK_PACKET, protocol).
We need to tswap16() the protocol because on big-endian, the ABI is
waiting for, for instance for ETH_P_ALL, 0x0003 (big endian ==
network order), whereas on little-endian it is waiting for 0x0300.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Convert malloc()/ calloc() calls to g_malloc()/ g_try_malloc()/ g_new0()
All heap memory allocation should go through glib so that we can take
advantage of a single memory allocator and its debugging/tracing features.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
According to comments in /usr/include/linux/eventpoll.h,
poll_event is packed only on x86_64.
And to be sure fields are correctly aligned in epoll_data,
use abi_XXX types for all of them.
Moreover, fd type is wrong: fd is int, not ulong.
This has been tested with a ppc guest on an x86_64 host:
without this patch, systemd crashes (core).
CC: Alexander Graf <agraf@suse.de>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch introduces a system very similar to the one used in the kernel
to attach specific functions to a given file descriptor.
In this case, we attach a specific "host_to_target()" translator to the fd
returned by signalfd() to be able to byte-swap the signalfd_siginfo
structure provided by read().
This patch allows to execute the example program given by
man signalfd(2):
#include <sys/signalfd.h>
#include <signal.h>
#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
#define handle_error(msg) \
do { perror(msg); exit(EXIT_FAILURE); } while (0)
int
main(int argc, char *argv[])
{
sigset_t mask;
int sfd;
struct signalfd_siginfo fdsi;
ssize_t s;
sigemptyset(&mask);
sigaddset(&mask, SIGINT);
sigaddset(&mask, SIGQUIT);
/* Block signals so that they aren't handled
according to their default dispositions */
if (sigprocmask(SIG_BLOCK, &mask, NULL) == -1)
handle_error("sigprocmask");
sfd = signalfd(-1, &mask, 0);
if (sfd == -1)
handle_error("signalfd");
for (;;) {
s = read(sfd, &fdsi, sizeof(struct signalfd_siginfo));
if (s != sizeof(struct signalfd_siginfo))
handle_error("read");
if (fdsi.ssi_signo == SIGINT) {
printf("Got SIGINT\n");
} else if (fdsi.ssi_signo == SIGQUIT) {
printf("Got SIGQUIT\n");
exit(EXIT_SUCCESS);
} else {
printf("Read unexpected signal\n");
}
}
}
$ ./signalfd_demo
^CGot SIGINT
^CGot SIGINT
^\Got SIGQUIT
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
"Unimplemented" messages go to stderr, everything else goes to tracepoints
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure that all log writes are protected by qemu_loglevel_mask or,
in serious cases, go to both the log and stderr.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, the same message is printed both on stderr and in the log.
Avoid duplicate output in the default case where stderr _is_ the log,
and standardize this to stderr+log where it used to use stdio+log.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Anthony reported that >4GB guests on Xen with 32bit QEMU broke after
commit 4ed023c ("Round up RAMBlock sizes to host page sizes", 2015-11-05).
In that patch sizes are masked against qemu_host_page_size/mask which
are uintptr_t, and thus 32bit on a 32bit QEMU, even though the ram space
might be bigger than 4GB on Xen.
Since ram_addr_t is not available on user-mode emulation targets, ensure
that we get a sign extension when masking away the low bits of the address.
Remove the ~10 year old scary comment that the type of these variables
is probably wrong, with another equally scary comment. The new comment
however does not have "???" in it, which is arguably an improvement.
For completeness use the alignment macros in linux-user and bsd-user
instead of manually doing an &. linux-user and bsd-user are not affected
by the Xen issue, however.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes: 4ed023ce2a
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to use g_malloc0 to zero the memory if we memcpy to
the whole buffer afterwards anyway. Actually, there is even
a function which combines both steps, g_memdup, so let's use
this function here instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Casting to a union type is a gcc (and clang) extension. Other compilers
might not support it. This is not a problem today, but the type casts
can be removed easily. Smatch now no longer complains like before:
linux-user/syscall.c:3190:18: warning: cast to non-scalar
linux-user/syscall.c:7348:44: warning: cast to non-scalar
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This should help clarify the purpose of the function that returns
the host system's CPU cycle count.
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
ppc portion
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Notice raise and bpt, decoding the constants embedded in the
nop addil instruction in the x0 slot.
[rth: Generalize TILEGX_EXCP_OPCODE_ILL to TILEGX_EXCP_SIGNAL.
Drop validation of signal values.]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443243635-4886-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
[rth: Remove the spreg[EX1] handling, as it's irrelevant to user-mode.]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443312618-13641-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
They content several new macro members, also contents TARGET_N*.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443240605-2924-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
All error conditions that target_mprotect checks are also checked
by target_mmap. EACCESS cannot happen because we are just removing
PROT_WRITE. ENOMEM should not happen because we are modifying a
whole VMA (and we have bigger problems anyway if it happens).
Fixes a Coverity false positive, where Coverity complains about
target_mprotect's return value being passed to tb_invalidate_phys_range.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
qemu has already considered about some targets may have no traditional
signals. And openrisc's setup_frame() is dummy, but it can be supported
by setup_rt_frame().
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Under Alpha host, EAGAIN is redefined to 35, so it need be remapped too.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch allows to run example given by open_by_handle_at(2):
The following shell session demonstrates the use of these two programs:
$ echo 'Can you please think about it?' > cecilia.txt
$ ./t_name_to_handle_at cecilia.txt > fh
$ ./t_open_by_handle_at < fh
open_by_handle_at: Operation not permitted
$ sudo ./t_open_by_handle_at < fh # Need CAP_SYS_ADMIN
Read 31 bytes
$ rm cecilia.txt
Now we delete and (quickly) re-create the file so that it has the same
content and (by chance) the same inode.[...]
$ stat --printf="%i\n" cecilia.txt # Display inode number
4072121
$ rm cecilia.txt
$ echo 'Can you please think about it?' > cecilia.txt
$ stat --printf="%i\n" cecilia.txt # Check inode number
4072121
$ sudo ./t_open_by_handle_at < fh
open_by_handle_at: Stale NFS file handle
See the man page for source code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Whilst calls to do_fork() are wrapped in get_errno() this does not
translate return values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently, __target_cmsg_nxthdr compares a pointer derived from
target_cmsg against the msg_control field of target_msgh (through
subtraction). This failed for me when emulating i386 code under x86_64,
because pointers in the host address space and pointers in the guest
address space were not the same. This patch passes the initial value of
target_cmsg into __target_cmsg_nxthdr.
I found and fixed two more related bugs:
- __target_cmsg_nxthdr now returns the new cmsg pointer instead of the
old one.
- tgt_space (in host_to_target_cmsg) doesn't count "sizeof (struct
target_cmsghdr)" twice anymore.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Instead of creating a temporary copy for the whole environment and
the arguments, directly copy everything to the target stack.
For this to work, we have to change the order of stack creation and
copying the arguments.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The system mode binaries provide a similar alias
and it makes common options like --version and --help
work as expected.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As suggested by Laurent, use EXIT_SUCCESS and EXIT_FAILURE from
stdlib.h instead of numeric values.
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch adds better support for diagnosing option
parser errors. The previous implementation just printed
the usage text and exited when a bad option or argument
was found. This made it very difficult to determine why
the usage was being displayed and it was doubly confusing
for cases like '--help' (it wasn't clear that --help was
actually an error).
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This option is already available on the system mode
binaries. It would be better if long options were
supported (i.e. --help), but this is okay for now.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Rename ELF_MACHINE to be PPC specific. This is used as-is by the
various PPC bootloaders and is locally defined to ELF_MACHINE in linux
user in PPC specific ifdeffery.
This removes another architecture specific definition from the global
namespace (as desired by multi-arch).
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only generic code relying on this is linux-user. Linux user
already has a lot of #ifdef TARGET_ customisation so instead, define
ELF_ARCH as either EM_ARM or EM_AARCH64 appropriately.
The armv7m bootloader can just pass EM_ARM directly, as that
is architecture specific code. Note that arm_boot already has its own
logic selecting an arm specific elf machine so this makes V7M more
consistent with arm_boot.
This removes another architecture specific definition from the global
namespace.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For many arch's this macro is defined as the predicatable behaviour
of checking the argument for eqaulity against ELF_ARCH. Provide a
default define as such, so only archs with special handling (usually
allowing multiple EM values) need to provide a def.
Arches that do any of:
1: provide this def exactly the same way as the new default
(alpha, x86_64)
2: check against ELF_MACHINE while defining ELF_ARCH == ELF_MACHINE
(arm, aarch64)
3: check against EM_FOO directly while defining ELF_ARCH == EM_FOO
(unicore32, sparc32, ppc32, mips, openrisc, sh4, cris, m86k)
have their elf_check_arch removed as the default will provide the
correct behaviour.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In most (but not all) cases, ELF_MACHINE and ELF_ARCH are safely the
same. Default ELF_MACHINE to ELF_ARCH. This makes defining ELF_MACHINE
optional for target-*/cpu.h when they are known to match.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are setting SRR0 to the instruction before the one causing the
unaligned exception. A quick testcase:
. = 0x100
.globl _start
_start:
/* Cause a 0x600 */
li 3,0x1
stwcx. 3,0,3
1: b 1b
. = 0x600
1: b 1b
Built into something we can load as a BIOS image:
gcc -mbig -c test.S
ld -EB -Ttext 0x0 -o test test.o
objcopy -O binary test test.bin
Run with:
qemu-system-ppc64 -nographic -bios test.bin
Shows an incorrect SRR0 (points at the li):
SRR0 0000000000000100
With the patch we get the correct SRR0:
SRR0 0000000000000104
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some of architectures (e.g. tilegx), several syscall macros are not
supported, so switch them.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP457D6FC9B2B9BA87AEB22CB9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add main working flow feature, system call processing feature, and elf64
tilegx binary loading feature, based on Linux kernel tilegx 64-bit
implementation.
[rth: Moved all of the implementation of atomic instructions to a later patch.]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP938552D42808AA60634582B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
They are based on Linux kernel tilegx architecture for 64 bit binary,
and also based on tilegx ABI reference document, and also reference from
other targets implementations.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP2508945F92945BB525605A3B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Warnings from the Sparse static analysis tool:
linux-user/main.c:40:12: warning:
symbol 'filename' was not declared. Should it be static?
linux-user/main.c:41:12: warning:
symbol 'argv0' was not declared. Should it be static?
linux-user/main.c:42:5: warning:
symbol 'gdbstub_port' was not declared. Should it be static?
linux-user/main.c:43:11: warning:
symbol 'envlist' was not declared. Should it be static?
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A number of files were including assert.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is some iffy lock hierarchy going on in translate-all.c. To
fix it, we need to take the mmap_lock in cpu-exec.c. Make the
functions globally available.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
spinlock is only used in two cases:
* cpu-exec.c: to protect TranslationBlock
* mem_helper.c: for lock helper in target-i386 (which seems broken).
It's a pthread_mutex_t in user-mode, so we can use QemuMutex directly,
with an #ifdef. The #ifdef will be removed when multithreaded TCG
will need the mutex as well.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-Id: <1439220437-23957-5-git-send-email-fred.konrad@greensocs.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[Merge Emilio G. Cota's patch to remove volatile. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the A64 instruction set, the semihosting call instruction
is 'HLT 0xf000'. Wire this up to call do_arm_semihosting()
if semihosting is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christopher Covington <christopher.covington@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-10-git-send-email-peter.maydell@linaro.org
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base
and the macros GUEST_BASE and RESERVED_VA become useless: replace
them by their values.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.
Anyway, guest base use can be disabled lively by setting guest
base to 0.
CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the MIPS N64 ABI when QEMU reads the break/trap instruction so that
it can inspect the break/trap code it reads 8 rather than 4 bytes
which means it finds the code field from the instruction after the
break/trap instruction. This then causes the break/trap handling
code to fail because it does not understand the code number.
The fix forces QEMU to always read 4 bytes of instruction data rather
than deciding how much to read based on the ABI.
Signed-off-by: Andrew Bennett <andrew.bennett@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
