Commit Graph

1168 Commits

Author SHA1 Message Date
Li Qiang
ca1d410285 hw: ccid-card-emulated: introduce clean_event_notifier
Call it in device unrealize function.

Signed-off-by: Li Qiang <liq3ea@gmail.com>
Message-id: 1539946236-18028-2-git-send-email-liq3ea@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-29 10:46:07 +01:00
Li Qiang
b9a3a4f206 usb: ohci: make num_ports to an unsinged integer
This can avoid setting OCHIState.num_ports to a negative num.

Signed-off-by: Li Qiang <liq3ea@gmail.com>
Message-id: 1540263618-18344-1-git-send-email-liq3ea@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-29 10:25:12 +01:00
Markus Armbruster
4b5766488f error: Fix use of error_prepend() with &error_fatal, &error_abort
From include/qapi/error.h:

  * Pass an existing error to the caller with the message modified:
  *     error_propagate(errp, err);
  *     error_prepend(errp, "Could not frobnicate '%s': ", name);

Fei Li pointed out that doing error_propagate() first doesn't work
well when @errp is &error_fatal or &error_abort: the error_prepend()
is never reached.

Since I doubt fixing the documentation will stop people from getting
it wrong, introduce error_propagate_prepend(), in the hope that it
lures people away from using its constituents in the wrong order.
Update the instructions in error.h accordingly.

Convert existing error_prepend() next to error_propagate to
error_propagate_prepend().  If any of these get reached with
&error_fatal or &error_abort, the error messages improve.  I didn't
check whether that's the case anywhere.

Cc: Fei Li <fli@suse.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-2-armbru@redhat.com>
2018-10-19 14:51:34 +02:00
Miguel GAIO
a60f39a468 ohci: set effectively usb frame rate to 1kHz
USB frame rate is slightly lower than 1kHz: ie. ~950Hz.
Thus usb-audio device is not able to perform a simple audio playback
without underruns on audio backend.
eg. "-device pci-ohci,id=ohci -device usb-audio,bus=ohci.0" vs PulseAudio
backend. more than 50 underruns are observed per second.

Update ohci_sof_time computation, using QEMU_CLOCK_VIRTUAL in
ohci_usb_start(), and increment by usb_frame_time in ohci_sof()
makes USB frame rate close to 1kHz.
This way, no audio underrun are observed during audio playback.

Signed-off-by: Miguel GAIO <mgaio35@gmail.com>
Message-Id: <20180927151936.3647-1-mgaio35@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-01 10:49:54 +02:00
Gerd Hoffmann
3e9191acb7 usb-hub: clear suspend on detach
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180912114012.6034-1-kraxel@redhat.com
2018-10-01 10:49:54 +02:00
Bandan Das
f7c36a754c usb-mtp: reset ObjectInfo dataset size on cleanup
Stale values in this field may result in qemu
expecting more data on the next operation

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180907220851.9658-4-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-01 10:49:54 +02:00
Bandan
44dd419680 usb-mtp: fix error conditions for write operation
Return STORE_FULL if we can't write all the bytes but
return incomplete transfer if data received is less then
what was specified in the metadata. Also, use d->offset
as the file size which is valid for all file sizes.

Signed-off-by: Bandan <bsd@redhat.com>
Message-id: 20180907220851.9658-2-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-01 10:49:53 +02:00
Bandan Das
15aa757d05 dev-mtp: rename x-root to rootdir
x-root was renamed as such owing to the experimental nature of the
property; the underlying filesystem semantics were undecided

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180720214020.22897-6-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-08-21 10:27:59 +02:00
Bandan Das
3e096650a6 dev-mtp: Add support for > 4GB file transfers
To support larger file transfers, rely on a short packet
to detect end of the data phase and rewrite d->length to
the size received

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180720214020.22897-5-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-08-21 10:27:59 +02:00
Bandan Das
d33e3e4bf8 dev-mtp: retry write for incomplete transfers
For large buffers, write may not copy the full buffer. For example,
on Linux, write imposes a limit of 0x7ffff000. Note that this does
not fix >4G transfers but ~>2G files will transfer successfully.

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180720214020.22897-4-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-08-21 10:27:59 +02:00
Bandan Das
406f35d7fc dev-mtp: fix buffer allocation for writing file contents
usb_mtp_realloc() was being incorrectly used when allocating
buffer for incoming data. Set d->length only after resizing
the buffer.

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180720214020.22897-3-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-08-21 10:27:59 +02:00
Bandan Das
47bff13cea dev-mtp: add support for canceling transaction
The initiator can choose to cancel an ongoing request which
is specified by bRequest=0x64. If such a request arrives,
free up any pending state

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180720214020.22897-2-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-08-21 10:27:59 +02:00
Sebastian Bauer
7c48b95df4 ohci: Clear the interrupt counter for erroneous transfers
This is mandated by the ohci specification. It tells at 6.4.4 on page 104
that for transfer descriptors that are retired with an error the done
queue interrupt counter is cleared as if the interrupt delay field of the
descriptions were zero.

Before this change, error conditions were handled similarly to the
successful condition which is especially troublesome for control transfers.
Some drivers (e.g., the AmigaOS-one) as well as the example code in the
spec, set the setup stage with an interrupt delay of seven (which means no
interrupt). This is fine under normal conditions, because one usually
doesn't want to be notified about the completion of this stage. However, if
an error occurs in this stage, these drivers will not get notified with the
current implementation. The fix addresses this by following the spec more
closely. Also, otherwise, the ability to set interrupt delay to seven would
be useless.

Note that Linux drivers that I looked at don't seem to be affected as they
set six as the interrupt delay presumably for the reason that they won't
get notified otherwise.

Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Message-id: 20180729191928.11254-1-mail@sebastianbauer.info
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-08-21 10:25:22 +02:00
Kevin Wolf
572023f7b2 block: Remove deprecated -drive option serial
This reinstates commit b008326744,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.

The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.

Tests need to be updated to set the serial number with -global instead
of using the -drive option.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-08-15 12:50:39 +02:00
Cornelia Huck
44e8b4689c Revert "block: Remove deprecated -drive option serial"
This reverts commit b008326744.

Hold off removing this for one more QEMU release (current libvirt
release still uses it.)

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:11 +02:00
Peter Maydell
ba2dfe6f6f usb: bugfixes for ehci and xhci.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJbOzMsAAoJEEy22O7T6HE43hwP/jvz1w4jDEBRpORJmHcrIHiG
 b666V6/Y3yBqegxVNp9bZXE9eN1j7dwxnOB61/vWYqioSq8WFPi6DU4YdRfphYwn
 HI1Ge/ATN9oyXI61PvqJO2izJ+QPEoikDNc9utPHO5M7uQ1Tu4NKG5ItsJZ3JHZY
 Vg4XdGJgLjEsa0qsS+5plactG//SswV7g9ztzIZv+llOHnHnwDPrpcaPiYNt0iiP
 cEf/aE+jfA1joDq0rXOiUu8pUhqW+/Vmly+DI/YH920+CnMGHArX7L35kN5MztYx
 8oGcnDvB75F9S0VN+ygwDWiU11wQr626mYkTADWrBOgC0EHiaB3qGESNssQTaHuv
 N7EPdKeb0ZX57WvLdYoVZT0W32sGyM1l3xWmuxUeNqapdbOF95TkfmikxX80tS/n
 WrEgDnlknOXLtGUgcwfJ5CaM6t6qNfL9n/aZm9u2bj+pYY83/FEsZ5xXfs7AP58i
 078uWp0HisQWPzmON9zyJgXBGpMMEVir5SnHOwe/PVhNHkNt6Uw5LCbs2gwO+bb3
 SxapuNmdV3Ua/XvDyfjhAgHtFCXDSBb5/3KXxvkIIAFuVGQ88bATWMf6nnXjP0G7
 nIcaGM4zbLqNQ37bZHpqaGbX1ufZVRtLqj1Df/WOe9ebOfDUVOqK/KmqX89DdRAI
 eCxeSFC4csj/BoVpNngX
 =9UH4
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20180703-pull-request' into staging

usb: bugfixes for ehci and xhci.

# gpg: Signature made Tue 03 Jul 2018 09:26:20 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20180703-pull-request:
  xhci: fix guest-triggerable assert
  ehci: Don't fetch a NULL current qtd but advance the queue instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-03 17:10:39 +01:00
Gerd Hoffmann
8f36ec7088 xhci: fix guest-triggerable assert
Set xhci into error state instead of throwing a core dump.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180702162752.29233-1-kraxel@redhat.com
2018-07-03 09:50:39 +02:00
Sebastian Bauer
8bb01b257f ehci: Don't fetch a NULL current qtd but advance the queue instead.
Fetching qtd with the NULL address most likely makes no sense so from now
on, we handle it this case similarly as if the terminate (T) bit is not
set, which is already an exception as according to section 3.6 of the EHCI
spec there is no T bit defined for the current_qtd field.

The spec is a bit vague on how an EHCI driver should initialize these
fields: "The general operational model is that the host controller can
detect whether the overlay area contains a description of an active
transfer" (p. 49). QEMU primarily uses the QTD_TOKEN_ACTIVE bit of the
queue header to infer the activity state but there are other ways
conceivable.

This change allows QEMU to boot further into AmigaOS. The public available
version of the EHCI driver recycles queue heads in some rare conditions but
only clears the current_qtd field but not the status field. This works with
many available EHCI PCI cards but e.g., not with the Freescale USB
controller's found on the P5040. On the emulated EHCI controller of QEMU
the consequence is that some garbage was read in, which resulted in a
reset of the controller. This change fixes the problem.

Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20180625222718.4488-1-mail@sebastianbauer.info
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-03 09:49:44 +02:00
Philippe Mathieu-Daudé
246e195b52 hw/usb: Use the IEC binary prefix definitions
It eases code review, unit is explicit.

Patch generated using:

  $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/

and modified manually.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-36-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02 15:41:16 +02:00
Kevin Wolf
b8efb36b9e usb-storage: Add rerror/werror properties
The error handling policy was traditionally set with -drive, but with
-blockdev it is no longer possible to set frontend options. scsi-disk
(and other block devices) have long supported qdev properties to
configure the error handling policy, so let's add these options to
usb-storage as well and just forward them to the internal scsi-disk
instance.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-06-29 14:20:56 +02:00
Marc-André Lureau
9b5c2fd53f Revert "usb: release the created buses"
The USB device don't hold the bus. There is no ASAN related reports
anymore.

This reverts commit cd7bc87868.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180613172815.32738-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-18 09:15:51 +02:00
Marc-André Lureau
a1738cd8c5 Revert "usb-ccid: fix bus leak"
The bus is not owned by the device.

This reverts commit 410a096adf.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180613172815.32738-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-18 09:15:51 +02:00
Kevin Wolf
b008326744 block: Remove deprecated -drive option serial
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.

Tests need to be updated to set the serial number with -global instead
of using the -drive option.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-15 14:49:44 +02:00
Markus Armbruster
719a30776b Purge uses of banned g_assert_FOO()
We banned use of certain g_assert_FOO() functions outside tests, and
made checkpatch.pl flag them (commit 6e9389563e).  We neglected to
purge existing uses.  Do that now.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180608170231.27912-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
2018-06-13 13:47:35 +02:00
Bandan Das
3c969a6022 usb-mtp: Return error on suspicious TYPE_DATA packet from initiator
CID 1390604
If the initiator sends a packet with TYPE_DATA set without
initiating a CMD_GET_OBJECT_INFO first, then usb_mtp_get_data
can trip on a null s->data_out.

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-Id: <jpgr2m8ajfk.fsf_-_@linux.bootlegged.copy>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-12 12:08:12 +02:00
Marc-André Lureau
410a096adf usb-ccid: fix bus leak
qbus_create_inplace() creates a new reference in realize(), it must be
released in unrealize().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180531195119.22021-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-12 12:07:30 +02:00
Philippe Mathieu-Daudé
62713a2e50 usb/dev-mtp: Fix use of uninitialized values
This fixes:

  hw/usb/dev-mtp.c:971:5: warning: 4th function call argument is an uninitialized value
      trace_usb_mtp_op_get_partial_object(s->dev.addr, o->handle, o->path,
                                           c->argv[1], c->argv[2]);
                                                       ^~~~~~~~~~
and:

  hw/usb/dev-mtp.c:981:12: warning: Assigned value is garbage or undefined
      offset = c->argv[1];
               ^ ~~~~~~~~~~

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180604151421.23385-3-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-12 12:07:02 +02:00
Philippe Mathieu-Daudé
bf78fb1c1b usb: correctly handle Zero Length Packets
USB Specification Revision 2.0, §5.5.3:
  The Data stage of a control transfer from an endpoint to the host is complete when the endpoint does one of the following:
  • Has transferred exactly the amount of data specified during the Setup stage
  • Transfers a packet with a payload size less than wMaxPacketSize or transfers a zero-length packet"

hw/usb/redirect.c:802:9: warning: Declared variable-length array (VLA) has zero size
        uint8_t buf[size];
        ^~~~~~~~~~~ ~~~~

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180604151421.23385-2-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-12 12:07:02 +02:00
Peter Maydell
f67c9b693a acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
 cleanups, NFIT ACPI table.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
 LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
 EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
 odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
 a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
 KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
 =3+V0
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

acpi, vhost, misc: fixes, features

vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (31 commits)
  vhost-blk: turn on pre-defined RO feature bit
  ACPI testing: test NFIT platform capabilities
  nvdimm, acpi: support NFIT platform capabilities
  tests/.gitignore: add entry for generated file
  arch_init: sort architectures
  ui: use local path for local headers
  qga: use local path for local headers
  colo: use local path for local headers
  migration: use local path for local headers
  usb: use local path for local headers
  sd: fix up include
  vhost-scsi: drop an unused include
  ppc: use local path for local headers
  rocker: drop an unused include
  e1000e: use local path for local headers
  ioapic: fix up includes
  ide: use local path for local headers
  display: use local path for local headers
  trace: use local path for local headers
  migration: drop an unused include
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04 10:15:16 +01:00
Michael S. Tsirkin
463581a827 usb: use local path for local headers
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01 19:20:38 +03:00
Philippe Mathieu-Daudé
6dd046a3c4 hw: Do not include "sysemu/blockdev.h" if it is not necessary
Remove those unneeded includes to speed up the compilation
process a little bit.

Code change produced with:

    $ git grep '#include "sysemu/blockdev.h"' | \
      cut -d: -f-1 | \
      xargs egrep -L "(BlockInterfaceType|DriveInfo|drive_get|blk_legacy_dinfo|blockdev_mark_auto_del)" | \
      xargs sed -i.bak '/#include "sysemu\/blockdev.h"/d'

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-15-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 14:15:10 +02:00
Paul Durrant
58560f2ae7 xen: remove other open-coded use of libxengnttab
Now that helpers are available in xen_backend, use them throughout all
Xen PV backends.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2018-05-22 11:43:21 -07:00
Jakub Jelen
8030dca376 hw/usb/dev-smartcard-reader: Handle 64 B USB packets
The current code was not correctly handling 64 B (Max USB 1.1 payload size)
packets and therefore preventing some of the messages from smart card to
pass through to the guest.

If the smart card in host responded with 34 B of data in APDU layer, the
CCID headers added up to 64 B. The packet was send, but not correctly
committed per USB specification (8.5.3.2  Variable-length Data Stage):

>   When all of the data structure is returned to the host, the function
> should indicate that the Data stage is ended by returning a packet
> that is shorter than the MaxPacketSize for the pipe.  If the data
> structure is an exact multiple of wMaxPacketSize for the pipe, the
> function will return a zero-length packet to indicate the end of the
> Data stage.

This lead the guest applications to timeout while waiting for the rest
of data (the emulation layer is answering with NAK until the timeout).

This patch is checking the current maximum packet size and if the
payload of this size is detected, the message buffer is not yet released.
With the next call, the empty buffer is sent and the message buffer
is finally released.

Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Message-id: 20180516115544.3897-2-jjelen@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-05-18 09:42:16 +02:00
Marc-André Lureau
e58d64a16a ccid-card-passthru: fix regression in realize()
Since cc847bfd16, CCID card-passthru
fails to intialize, because it changed a debug line to an error,
probably by mistake. Change it back to a DPRINTF debug.

(solves Boxes creating VM with smartcard passthru failing to start)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180515153039.27514-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-05-18 09:41:17 +02:00
Peter Maydell
302a84e878 usb: fixes for mtp and host.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJa8B/6AAoJEEy22O7T6HE4ZQcP+waDHAjd4RKtEz9ifgjKlpNQ
 8EyXp/fmD0tVyuFO/nnU89tQOAWj9PkSAkVfPVSyCCqL0wSr7kIGtlInVHFLJniW
 IU6wpVSWlItz1Hof5giu5REpdFA/vpTv0EVgV85QEpfMNo2xe2zx90KLe74qaHqf
 P7N/o/HTp2ZZA//UtcbLMUDa/2krQVFaVCzr4bjr1otiaRAOBIb3fZg/qvfkyxxU
 o9QCfmHm2BuuWjeQ7tJWQKbnvlHahkDPGxUWRb+MVlG0X1s9A/bZ7pMx4yCqkW1z
 EYVA2+9zy/JLDXNYCyQb+fDE6RQUbnkNy0KAKjJ5FGPeINwNtEyhfM+VhY1pUTDh
 TeeKoqJrK1lBqN9oKVSY8kK5PkDXrPD5JWoK5Zm6xrCgygXf+7fsVYWE4cTgbYuS
 IzdhtRctD286bE8rPSwm2mDra8PgTL2ahY8k5nVf7yye5QeF0tDN0UwPMe1JQzQ8
 4WQb5XMpgmHJoy0avTqM4mIZI32d6T1o8CtCcSAC82sWHdLTNtrDYQZqY8aLmISp
 Q7TdZF0DL9juKI4u94pwQGie0cYQOzXedlxCpYrRyqcln1/BTf00KIewgIINGXhQ
 Hqenf2kr+L6a/7Gb39YScrDIm28anxg+ESypFlv7LhRo9d3rBtJ0AFQM1m4egXFe
 2fDuEtyyFBbangZM7vkh
 =uG6k
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20180507-pull-request' into staging

usb: fixes for mtp and host.

# gpg: Signature made Mon 07 May 2018 10:44:26 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20180507-pull-request:
  usb-host: skip open on pending postload bh
  usb-mtp: Unconditionally check for the readonly bit
  usb-mtp: Add some NULL checks for issues pointed out by coverity

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-08 12:02:18 +01:00
Gerd Hoffmann
3280ea8ede usb-host: skip open on pending postload bh
usb-host emulates a device unplug after live migration, because the
device state is unknown and unplug/replug makes sure the guest
re-initializes the device into a working state.  This can't be done in
post-load though, so post-load just schedules a bottom half which
executes after vmload is complete.

It can happen that the device autoscan timer hits the race window
between scheduling and running the bottom half, which in turn can
triggers an assert().

Fix that issue by just ignoring the usb_host_open() call in case the
bottom half didn't execute yet.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1572851
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180503062932.17233-1-kraxel@redhat.com
2018-05-07 11:10:42 +02:00
Bandan Das
2392ae6bbb usb-mtp: Unconditionally check for the readonly bit
Currently, it's only being checked if desc is NULL and
so write support breaks upon specifying desc

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180503192028.14353-3-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-05-07 11:10:25 +02:00
Bandan Das
24e8d1faea usb-mtp: Add some NULL checks for issues pointed out by coverity
CID 1390578: In usb_mtp_write_metadata, parent can never be NULL but
just in case, add an assert
CID 1390592: Check for o->format only if o !=NULL
CID 1390604: Check s->data_out != NULL in usb_mtp_handle_data

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180503192028.14353-2-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-05-07 11:10:25 +02:00
Peter Maydell
a22cadbefd hw/usb/tusb6010: Convert away from old_mmio
Convert the tusb6010 device away from using the old_mmio field
of MemoryRegionOps. This device is used only in the n800 and n810
boards.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180427173611.10281-2-peter.maydell@linaro.org
2018-05-04 18:05:50 +01:00
Marc-André Lureau
cb3e7f08ae qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.

The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked().  Unlike
qobject_decref(), qobject_unref() doesn't accept void *.

Note that the new macros evaluate their argument exactly once, thus no
need to shout them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-04 08:27:53 +02:00
Michal Privoznik
0f5c642d49 ccid-card: include libcacard.h only
When trying to build with latest libcacard-2.5.1, I hit the
following error:

In file included from hw/usb/ccid-card-passthru.c:12:0:
/usr/include/cacard/vscard_common.h:26:2: error: #warning "Only <libcacard.h> can be included directly" [-Werror=cpp]
 #warning "Only <libcacard.h> can be included directly"

While it was fixed in libcacard upstream (so that individual
files can be included directly), it doesn't make much sense.
Let's switch to including the main libcacard.h and also require
at least libcacard-2.5.1 which introduced it. It's available
since late 2015.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 3c36db1dc0702763ebb7966cc27428ed67d43804.1522751624.git.mprivozn@redhat.com

[ kraxel: fix include path ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-04-27 10:57:09 +02:00
John Thomson
9d8fa0df49 Fix libusb-1.0.22 deprecated libusb_set_debug with libusb_set_option
libusb-1.0.22 marked libusb_set_debug deprecated
it is replaced with
libusb_set_option(libusb_context, LIBUSB_OPTION_LOG_LEVEL, libusb_log_level);

details here: 539f22e2fd

Warning here:

  CC      hw/usb/host-libusb.o
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c: In function 'usb_host_init':
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c:250:5: error: 'libusb_set_debug' is deprecated: Use libusb_set_option instead [-Werror=deprecated-declarations]
     libusb_set_debug(ctx, loglevel);
     ^~~~~~~~~~~~~~~~
In file included from /builds/xen/src/qemu-xen/hw/usb/host-libusb.c:40:0:
/usr/include/libusb-1.0/libusb.h:1300:18: note: declared here
 void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
                  ^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [/builds/xen/src/qemu-xen/rules.mak:66: hw/usb/host-libusb.o] Error 1
make: Leaving directory '/builds/xen/src/xen/tools/qemu-xen-build'

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Message-id: 20180405132046.4968-1-git@johnthomson.fastmail.com.au
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-04-27 10:34:21 +02:00
Jason Andryuk
0ee86bb6c5 ccid: Fix dwProtocols advertisement of T=0
Commit d7d218ef02 attempted to change
dwProtocols to only advertise support for T=0 and not T=1.  The change
was incorrect as it changed 0x00000003 to 0x00010000.

lsusb -v in a linux guest shows:
"dwProtocols         65536  (Invalid values detected)", though the
smart card could still be accessed.  Windows 7 does not detect inserted
smart cards and logs the the following Error in the Event Logs:

    Source: Smart Card Service
    Event ID: 610
    Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL:
    Incorrect function. If this error persists, your smart card or reader
    may not be functioning correctly

    Command Header: 03 00 00 00

Setting to 0x00000001 fixes the Windows issue.

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20180420183219.20722-1-jandryuk@gmail.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-04-27 10:28:20 +02:00
zhenwei.pi
c7ac1ab020 usbredir: reorder fields in USBRedirDevice to reduce padding
Changing the current ordering saves 8 bytes per entry in x86_64.

Signed-off-by: zhenwei.pi <zhenwei.pi@youruncloud.com>
Message-id: 1520318781-22644-1-git-send-email-zhenwei.pi@youruncloud.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-03-12 11:43:49 +01:00
Bandan Das
53735bef10 usb-mtp: Advertise SendObjectInfo for write support
This patch implements a dummy ObjectInfo structure so that
it's easy to typecast the incoming data. If the metadata is
valid, write_pending is set. Also, the incoming filename
is utf-16, so, instead of depending on external libraries, just
implement a simple function to get the filename

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180223164829.29683-6-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26 12:18:36 +01:00
Bandan Das
88d5f381ec usb-mtp: Introduce write support for MTP objects
Allow write operations on behalf of the initiator. The
precursor to write is the sending of the write metadata
that consists of the ObjectInfo dataset. This patch introduces
a flag that is set when the responder is ready to receive
write data based on a previous SendObjectInfo operation by
the initiator (The SendObjectInfo implementation is in a
later patch)

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180223164829.29683-5-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26 12:18:36 +01:00
Bandan Das
ec6206a68f usb-mtp: Support delete of mtp objects
Write of existing objects by the initiator is acheived by
making a temporary buffer with the new changes, deleting the
old file and then writing a new file with the same name.

Also, add a "readonly" property which needs to be set to false
for deletion to work.

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180223164829.29683-4-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26 12:18:36 +01:00
Bandan Das
5d13ebeacc usb-mtp: print parent path in IN_IGNORED trace fn
Fix a possible null dereference when deleting a folder and
its contents. An ignored event might be received for its contents
after the parent folder is deleted which will return a null object.

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180223164829.29683-3-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26 12:18:36 +01:00
Bandan Das
9c72758439 usb-mtp: Add one more argument when building results
The response to a SendObjectInfo consists of the storageid,
parent obejct handle and the handle reserved for the new
incoming object

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180223164829.29683-2-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26 12:18:36 +01:00
Peter Maydell
b734ed9de1 virtio,vhost,pci,pc: features, fixes and cleanups
- new stats in virtio balloon
 - virtio eventfd rework for boot speedup
 - vhost memory rework for boot speedup
 - fixes and cleanups all over the place
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJagxKDAAoJECgfDbjSjVRp5qAH/3gmgBaIzL3KRHd5i0RZifJv
 PvyAVYgZd7h0+/1r9GM7guHKyEPZ08JtbHSm/HuDV4BD/Vf3/8joy8roExIfde2A
 6k8fd6ANVQmE3t5zUxNXi9qiG4pO4xDIu4cMAbixzgN9x5ttlcfTw7fTT0e0VJxJ
 8SN02/uCPPR/DY4/cpjah+slSyv6rBKT1v1ONy7djyRTYHi6h3Meoh05YfEALkwA
 goxTKBZHi0L1IZ3HP/ZpXJDohQ5n2P09DX0fQgb8PgmW6WIWB/Qpi5pD53LZpMCV
 n9waTF0U0ahneFd2FHo22QMMrwWvQyrjv+w5uXVr+qmHb/OyH2tUt7PgGF9+QKA=
 =78s5
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,vhost,pci,pc: features, fixes and cleanups

- new stats in virtio balloon
- virtio eventfd rework for boot speedup
- vhost memory rework for boot speedup
- fixes and cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (22 commits)
  virtio-balloon: include statistics of disk/file caches
  acpi-test: update FADT
  lpc: drop pcie host dependency
  tests: acpi: fix FADT not being compared to reference table
  hw/pci-bridge: fix pcie root port's IO hints capability
  libvhost-user: Support across-memory-boundary access
  libvhost-user: Fix resource leak
  virtio-balloon: unref the memory region before continuing
  pci: removed the is_express field since a uniform interface was inserted
  virtio-blk: enable multiple vectors when using multiple I/O queues
  pci/bus: let it has higher migration priority
  pci-bridge/i82801b11: clear bridge registers on platform reset
  vhost: Move log_dirty check
  vhost: Merge and delete unused callbacks
  vhost: Clean out old vhost_set_memory and friends
  vhost: Regenerate region list from changed sections list
  vhost: Merge sections added to temporary list
  vhost: Simplify ring verification checks
  vhost: Build temporary section list and deref after commit
  virtio: improve virtio devices initialization time
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-13 16:33:31 +00:00
Peter Maydell
7e0019a719 Miscellaneous patches for 2018-02-07
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJafZmjAAoJEDhwtADrkYZTuvkP/i8gYzquYW/8u0XiGjQdi0VM
 cZzxqLe9DSxfjRO9p0D11uLQmw3js8z60mi++1NOhtYTn4P/htsgXLrrxrLS8U0I
 b+mD6LeqGN2miCKWy4X/w52S0krW05ROJMb/s+OQP7aJu/OA+t6QXM6jzIPOnFa+
 GrxFesOizvjLVONvmI8nbUKXayJ77rB8ctsuCjmbMO1XkxMLPWLchduswFH7ywbL
 ZJwUK3v1x+R0Apvy7y4f8e6aamreABtAjuD53zoS1PmLfZ4dvgYVJkhimIGsVjpA
 8AGCbazsIWl7YLJ2dghXaVE2gwV3LrwTPhoF0YeSjrJ2f4TE7NPCaPZW3C9yTtQC
 YEiD4cG5HNE7HhBRIImmTvOGU7sSmYwJQ4+5yGKtJGlBGRSbYP2upWf3nEsOnGPx
 TkdcsEPQHEP/YuJlZpO4jfdUiBAQsbmyY3xnMvdpfhDJRGSB7UwQ1xTgmjIXOr15
 6Zv4NaWB0JInGhoEAra4Jdld3fJ0Nh+XAXITAPogppipvxmIYz9AxZTjhu0cQWX6
 dDvk3FSOuC8Y+r/6UxQkAwCNAld+GilAABgHtXQjx8b8ySlE98EKuvcmPaH4pemC
 K0YoRF32rIoDLbh6xg++ior7+eABrk9STlqCI/3SSEgDr0loTyXnI5KBBNoz+Jjw
 AU2c5RYvNOqEGT42bL/C
 =DMbf
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-02-07-v4' into staging

Miscellaneous patches for 2018-02-07

# gpg: Signature made Fri 09 Feb 2018 12:52:51 GMT
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2018-02-07-v4:
  Move include qemu/option.h from qemu-common.h to actual users
  Drop superfluous includes of qapi/qmp/qjson.h
  Drop superfluous includes of qapi/qmp/dispatch.h
  Include qapi/qmp/qnull.h exactly where needed
  Include qapi/qmp/qnum.h exactly where needed
  Include qapi/qmp/qbool.h exactly where needed
  Include qapi/qmp/qstring.h exactly where needed
  Include qapi/qmp/qdict.h exactly where needed
  Include qapi/qmp/qlist.h exactly where needed
  Include qapi/qmp/qobject.h exactly where needed
  qdict qlist: Make most helper macros functions
  Eliminate qapi/qmp/types.h
  Typedef the subtypes of QObject in qemu/typedefs.h, too
  Include qmp-commands.h exactly where needed
  Drop superfluous includes of qapi/qmp/qerror.h
  Include qapi/error.h exactly where needed
  Drop superfluous includes of qapi-types.h and test-qapi-types.h
  Clean up includes
  Use #include "..." for our own headers, <...> for others
  vnc: use stubs for CONFIG_VNC=n dummy functions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09 14:39:09 +00:00
Markus Armbruster
922a01a013 Move include qemu/option.h from qemu-common.h to actual users
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter.  Drop the include, and add it
to the places that actually need it.

While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.

This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09 13:52:16 +01:00
Markus Armbruster
bd006b9818 Include qapi/qmp/qbool.h exactly where needed
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-15-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
452fcdbc49 Include qapi/qmp/qdict.h exactly where needed
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.

While there, separate #include from file comment with a blank line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
e688df6bc4 Include qapi/error.h exactly where needed
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09 13:50:17 +01:00
Andrey Smirnov
a24273bba8 usb: Add basic code to emulate Chipidea USB IP
Add code to emulate Chipidea USB IP (used in i.MX SoCs). Tested to
work against:

-usb -drive if=none,id=stick,file=usb.img,format=raw -device \
 usb-storage,bus=usb-bus.0,drive=stick

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09 10:40:30 +00:00
Yoni Bettan
d61a363d3e pci: removed the is_express field since a uniform interface was inserted
according to Eduardo Habkost's commit fd3b02c889 all PCIEs now implement
INTERFACE_PCIE_DEVICE so we don't need is_express field anymore.

Devices that implements only INTERFACE_PCIE_DEVICE (is_express == 1)
or
devices that implements only INTERFACE_CONVENTIONAL_PCI_DEVICE (is_express == 0)
where not affected by the change.

The only devices that were affected are those that are hybrid and also
had (is_express == 1) - therefor only:
  - hw/vfio/pci.c
  - hw/usb/hcd-xhci.c
  - hw/xen/xen_pt.c

For those 3 I made sure that QEMU_PCI_CAP_EXPRESS is on in instance_init()

Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Yoni Bettan <ybettan@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08 21:06:41 +02:00
Philippe Mathieu-Daudé
80ae865468 usb-ccid: convert CCIDCardClass::exitfn() -> unrealize()
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180125171432.13554-4-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-26 07:59:33 +01:00
Philippe Mathieu-Daudé
c7516699fc usb-ccid: inline ccid_card_initfn() in ccid_card_realize()
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180125171432.13554-3-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-26 07:59:33 +01:00
Mao Zhongyi
cc847bfd16 hw/usb/ccid: Make ccid_card_init() take an error parameter
Replace init() of CCIDCardClass with realize, then convert
ccid_card_init(), ccid_card_initfn() and it's callbacks to
take an Error** in ordor to report the error more clearly.

Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180125171432.13554-2-f4bug@amsat.org
[PMD: fixed s->card assignation in ccid_card_realize()]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-26 07:59:33 +01:00
Fam Zheng
395b953959 usb-storage: Fix share-rw option parsing
Because usb-storage creates an internal scsi device, we should propagate
options. We already do so for bootindex etc, but failed to take care of
share-rw. Fix it in an apparent way: add a new parameter to
scsi_bus_legacy_add_drive and pass in s->conf.share_rw.

Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20180117005222.4781-1-famz@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-26 07:58:34 +01:00
Thomas Huth
99761176ee usb: Remove legacy -usbdevice options (host, serial, disk and net)
The option have been marked as deprecated since QEMU 2.10, and so far
nobody complained that the host, serial, disk and net options are urgently
required anymore. So let's now get rid at least of this legacy pile, to
simplify the usb code quite a bit.

This patch removes the usbdevices host, serial, disk and net. These devices
use their own complicated parameter parsing mechanisms, so they are just
ugly to maintain, without real benefit for the users (the users can use the
corresponding "-device" parameters instead which have the same complexity
as the "-usbdevice" devices here).

Note that the other rather simple -usbdevice options (mouse, tablet, etc.)
are not removed yet (the code is really simple here, so it does not hurt
much to keep it), as well as the two devices "braille" and "bt" which are
easier to use with -usbdevice than with -device.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1515519171-20315-1-git-send-email-thuth@redhat.com

[kraxel] delete some usb_host_device_open() leftovers.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-26 07:15:08 +01:00
Alistair Francis
a89f364ae8 Replace all occurances of __FUNCTION__ with __func__
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.

One line in hcd-musb.c was manually tweaked to pass checkpatch.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-01-22 09:46:18 +01:00
Michael S. Tsirkin
acc95bc850 Merge remote-tracking branch 'origin/master' into HEAD
Resolve conflicts around apb.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-11 22:03:50 +02:00
Mao Zhongyi
6db3ea39e2 dev-storage: Fix the unusual function name
The function name of usb_msd_{realize,unrealize}_*,
usb_msd_class_initfn_* are unusual. Rename it to
usb_msd_*_{realize,unrealize}, usb_msd_class_*_initfn.

Cc: Gerd Hoffmann <kraxel@redhat.com>

Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 11e6003433abce35f3f4970e1acc71ee92dbcf51.1511317952.git.maozy.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:08 +00:00
Mao Zhongyi
ceff3e1f01 hw/block: Use errp directly rather than local_err
[Drop virtio_blk_data_plane_create() change that misinterprets return
value when the virtio transport does not support dataplane.
--Stefan]

Cc: John Snow <jsnow@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>

Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: e77848d3735ba590f23ffbf8094379c646c33d79.1511317952.git.maozy.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:03 +00:00
Thomas Huth
81950da681 hmp-commands: Remove the deprecated usb_add and usb_del
It's easy to use device_add and device_del as replacement instead.
The usb_add and usb_del commands are deprecated since QEMU 2.10,
and nobody complained that they are still needed, so let's get rid
of them now to make the HMP interface a little bit less overloaded.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512073140-17672-1-git-send-email-thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-12-14 10:16:52 +00:00
David Gibson
fd56e0612b pci: Eliminate redundant PCIDevice::bus pointer
The bus pointer in PCIDevice is basically redundant with QOM information.
It's always initialized to the qdev_get_parent_bus(), the only difference
is the type.

Therefore this patch eliminates the field, instead creating a pci_get_bus()
helper to do the type mangling to derive it conveniently from the QOM
Device object underneath.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05 19:13:45 +02:00
Marc-André Lureau
31bd59db44 usb-ccid: remove needless migration state code
This code appears to be unused since its introduction. We need to keep
the state_vmstate field byte in VMState for compatibility reasons.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171013125533.9153-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-10-23 10:05:28 +02:00
Eduardo Habkost
fd3b02c889 pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:

1) The ones that already have INTERFACE_PCIE_DEVICE set:

* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3

2) base-pci-bridge

Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:

* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge

The direct subtypes of base-pci-bridge not touched by this patch
are:

* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
  marked as PCIe-only devices.

3) megasas-base

Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.

"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".

Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15 05:54:43 +03:00
Eduardo Habkost
a5fa336f11 pci: Add interface names to hybrid PCI devices
The following devices support both PCI Express and Conventional
PCI, by including special code to handle the QEMU_PCI_CAP_EXPRESS
flag and/or conditional pcie_endpoint_cap_init() calls:

* vfio-pci (is_express=1, but legacy PCI handled by
  vfio_populate_device())
* vmxnet3 (is_express=0, but PCIe handled by vmxnet3_realize())
* pvscsi (is_express=0, but PCIe handled by pvscsi_realize())
* virtio-pci (is_express=0, but PCIe handled by
  virtio_pci_dc_realize(), and additional legacy PCI code at
  virtio_pci_realize())
* base-xhci (is_express=1, but pcie_endpoint_cap_init() call
  is conditional on pci_bus_is_express(dev->bus)
  * Note that xhci does not clear QEMU_PCI_CAP_EXPRESS like the
    other hybrid devices

Cc: Dmitry Fleytman <dmitry@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15 05:54:42 +03:00
Gerd Hoffmann
eea6ae2037 usb: fix host-stub.c build race
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20171004125210.7817-1-kraxel@redhat.com
2017-10-05 11:03:25 +02:00
Fam Zheng
13787d59cf usb: Use angle brackets for cacard include directive
This is a library header, so angle brackets are more appropriate; also
move the line to before QEMU headers, as is recommended in HACKING.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170920085952.3872-1-famz@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-29 12:28:26 +02:00
Gerd Hoffmann
275d477a1a usb: fix libusb config variable name.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Fixes: 4e5ee5b21c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 20170926063820.30773-1-kraxel@redhat.com
2017-09-29 12:27:30 +02:00
Thomas Huth
f3b2bea3c7 hw/usb/bus: Remove bad object_unparent() from usb_try_create_simple()
Valgrind detects an invalid read operation when hot-plugging of an
USB device fails:

$ valgrind x86_64-softmmu/qemu-system-x86_64 -device usb-ehci -nographic -S
==30598== Memcheck, a memory error detector
==30598== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==30598== Using Valgrind-3.12.0 and LibVEX; rerun with -h for copyright info
==30598== Command: x86_64-softmmu/qemu-system-x86_64 -device usb-ehci -nographic -S
==30598==
QEMU 2.10.50 monitor - type 'help' for more information
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
(qemu) device_add usb-tablet
==30598== Invalid read of size 8
==30598==    at 0x60EF50: object_unparent (object.c:445)
==30598==    by 0x580F0D: usb_try_create_simple (bus.c:346)
==30598==    by 0x581BEB: usb_claim_port (bus.c:451)
==30598==    by 0x582310: usb_qdev_realize (bus.c:257)
==30598==    by 0x4CB399: device_set_realized (qdev.c:914)
==30598==    by 0x60E26D: property_set_bool (object.c:1886)
==30598==    by 0x61235E: object_property_set_qobject (qom-qobject.c:27)
==30598==    by 0x61000F: object_property_set_bool (object.c:1162)
==30598==    by 0x4567C3: qdev_device_add (qdev-monitor.c:630)
==30598==    by 0x456D52: qmp_device_add (qdev-monitor.c:807)
==30598==    by 0x470A99: hmp_device_add (hmp.c:1933)
==30598==    by 0x3679C3: handle_hmp_command (monitor.c:3123)

The object_unparent() here is not necessary anymore since commit
69382d8b3e ("qdev: Fix object reference leak in case device.realize()
fails"), so let's remove it now.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1506526106-30971-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-29 12:23:12 +02:00
Peter Maydell
ab16152926 Migration pull 2017-09-27
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZy64HAAoJEAUWMx68W/3nTqwP/A5Gx4Qwkv5KKdpM0YLq//d+
 OODmzl7Ni3a5Up1ETqGdLb84estrgY+5DISp73Rkt4a5tbT7+XKrhb4qD+93NnTe
 zynY9in4C1jGxYm7YzeOhwSeIiuLZMTCLQlGdYw7/nunIFwkItUEvAFx3AG1WCJe
 2Mk0lvmg4LikruDDMdzqZaJu7h5RU5sQjA7SsyrTBdsN7tNWl3rKLYGXwgzv0uz5
 n2xkUgzvvnj1Bk/Adojkn05yxA86xKD/4rhFED9fjNVSjAGHMrHIWOJ70V26Cg5w
 3gJ+5mesWsH+erf0JFYv0S38SyFbmIOE39Nn13D/d0o1x89P8B8cgqbi3ADTKM77
 875wuIVnZzi2vIwVdxXQ9GHQ79cpXwr2fOfQ2rjT6Ll95K+u/MQG86fQiO0eJW+0
 KwQVCwwh+HmCUcCogMuxAc9+F8C8qolwCi/9QXwS2yLBElHKaWDIMyTce36cW9d7
 cZaKIOeSJUGNFoaWZnXN88MRuOYbdywTl+GddVAW3+VJCTYV2oi0o5fsTfxXy5AV
 y7uYo/pcSj2gSZJ5GairMlB6p5iXnE8yusi1e4ZKA1x1TaSHSb6zR59lRUFr+j/L
 JhUCfA85v5/elGqgkYp6UhSzFDJ2ID2oSEMQTIzfVrinOXtnf2KEh33YMbUH5qyo
 yHVEu12uPe9rE6A0vWlu
 =/+LV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170927a' into staging

Migration pull 2017-09-27

# gpg: Signature made Wed 27 Sep 2017 14:56:23 BST
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20170927a:
  migration: Route more error paths
  migration: Route errors up through vmstate_save
  migration: wire vmstate_save_state errors up to vmstate_subsection_save
  migration: Check field save returns
  migration: check pre_save return in vmstate_save_state
  migration: pre_save return int
  migration: disable auto-converge during bulk block migration

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-27 22:44:51 +01:00
Dr. David Alan Gilbert
44b1ff319c migration: pre_save return int
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.

Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.

Note: If you add an error exit in your pre_save you must emit
an error_report to say why.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27 11:35:59 +01:00
BALATON Zoltan
9ffe4ce56b ehci: Add ppc4xx-ehci for the USB 2.0 controller in embedded PPC SoCs
Some PPC SoCs have an EHCI with OHCI companion USB controller. Add a
new type for this similar to types used for other embedded SoCs.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27 13:05:41 +10:00
BALATON Zoltan
d7145b66c6 ohci: Allow sysbus version to be used as a companion
Some PPC SoCs have an EHCI with OHCI companion USB controller. To
emulate this allow the sysbus version of OHCI to be used as a companion.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27 13:05:41 +10:00
Fam Zheng
cc7923fc07 buildsys: Move usb redir cflags/libs to per object
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170907082918.7299-10-famz@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-22 10:20:34 +08:00
Fam Zheng
b878b652df buildsys: Move libusb cflags/libs to per object
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170907082918.7299-9-famz@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-22 10:20:34 +08:00
Fam Zheng
7b62bf5a70 buildsys: Move libcacard cflags/libs to per object
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170907082918.7299-8-famz@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-22 10:20:34 +08:00
Alistair Francis
2ab4b13563 Convert single line fprintf(.../n) to warn_report()
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.

All of the warnings were changed using this command:
  find ./* -type f -exec sed -i \
    's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
    {} +

Some of the lines were manually edited to reduce the line length to below
80 charecters.

The #include lines were manually updated to allow the code to compile.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19 14:09:34 +02:00
Paolo Bonzini
08e2c9f19c scsi: move block/scsi.h to include/scsi/constants.h
Complete the transition by renaming this header, which was
shared by block/iscsi.c and the SCSI emulation code.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19 14:09:31 +02:00
Gerd Hoffmann
2041649f0b usb: only build usb-host with CONFIG_USB=y
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20170908111217.21985-3-kraxel@redhat.com
2017-09-13 10:44:49 +02:00
Gerd Hoffmann
4e5ee5b21c usb: drop HOST_USB
Nowdays we use libusb for usb-host, so we don't have different code
for linux vs. bsd any more.  So there is little reason to have the
HOST_USB variable, we can just write things directly into the Makefile
and avoid a pointless indirection.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20170908111217.21985-2-kraxel@redhat.com
2017-09-13 10:44:49 +02:00
Alexey Kardashevskiy
6100dda70d xhci: Avoid DMA when ERSTBA is set to zero
The existing XHCI code reads the Event Ring Segment Table Base Address
Register (ERSTBA) every time when it is changed. However zero is its
default state so one would think that zero there means it is not in use.

This adds a check for ERSTBA in addition to the existing check for
the Event Ring Segment Table Size Register (ERSTSZ).

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 20170911065606.40600-1-aik@ozlabs.ru
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-13 10:41:39 +02:00
Marc-André Lureau
54ac85ef0d usb-hub: use DIV_ROUND_UP
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-08-31 12:29:07 +02:00
Vladimir Sementsov-Ogievskiy
8908eb1a4a trace-events: fix code style: print 0x before hex numbers
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.

This patch is made by the following:

> find . -name trace-events | xargs python script.py

where script.py is the following python script:
=========================
 #!/usr/bin/env python

import sys
import re
import fileinput

rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)

files = sys.argv[1:]

for fname in files:
    for line in fileinput.input(fname, inplace=True):
        arr = re.split(rgroup, line)
        for i in range(0, len(arr), 2):
            arr[i] = re.sub(rbad, '0x\g<0>', arr[i])

        sys.stdout.write(''.join(arr))
=========================

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-01 12:13:07 +01:00
Stefan Hajnoczi
d87aa13803 trace: add trace_event_get_state_backends()
Code that checks dstate is unaware of SystemTap and LTTng UST dstate, so
the following trace event will not fire when solely enabled by SystemTap
or LTTng UST:

  if (trace_event_get_state(TRACE_MY_EVENT)) {
      str = g_strdup_printf("Expensive string to generate ...",
                            ...);
      trace_my_event(str);
      g_free(str);
  }

Add trace_event_get_state_backends() to fetch backend dstate.  Those
backends that use QEMU dstate fetch it as part of
generate_h_backend_dstate().

Update existing trace_event_get_state() callers to use
trace_event_get_state_backends() instead.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170731140718.22010-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-01 12:13:07 +01:00
Philippe Mathieu-Daudé
87e0331c5a docs: fix broken paths to docs/devel/tracing.txt
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-31 13:12:53 +03:00
Eric Blake
121829cb21 usb: Fix build with newer gcc
gcc 7 is pickier about our sources:

hw/usb/bus.c: In function ‘usb_port_location’:
hw/usb/bus.c:410:66: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 15 [-Werror=format-truncation=]
         snprintf(downstream->path, sizeof(downstream->path), "%s.%d",
                                                                  ^~
hw/usb/bus.c:410:9: note: ‘snprintf’ output between 3 and 28 bytes into a destination of size 16
         snprintf(downstream->path, sizeof(downstream->path), "%s.%d",
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  upstream->path, portnr);
                  ~~~~~~~~~~~~~~~~~~~~~~~

But we know that there are at most 5 levels of USB hubs, with at
most two digits per level; that plus the separating dots means we
use at most 15 bytes (including trailing NUL) of our 16-byte field.
Adding an assertion to show gcc that we checked for truncation is
enough to shut up the false-positive warning.

Inspired by an idea by Dr. David Alan Gilbert <dgilbert@redhat.com>.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170717151334.17954-1-eblake@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-07-20 10:02:11 +02:00
Peter Maydell
ca4e667dbf ehci fix for 2.10
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJZbIXwAAoJEEy22O7T6HE4L+AQAJUPSHH+fkyrFrzv2Cy6NbvS
 2BbrvyYWy074Bg4+ASqCzX1hA0IAiUUcm7rbxhjyDi4lRsosAEHo4FP9/lsipwKY
 BFFmYEuOBm1tLYTY8VUeF6lvAK7jo2MPcUadnF/XSxPCWdN1xDBs52WlPjCS+nGL
 b5zUZGW0oqnL0oJapYrzDzfh4LDmOajWGZjf031kzK+h8+BHwaOuELEvZ92Te1z4
 Mth+HTPdCC35NO7eJDz870JfGsoaYX070FcXJRPE9BakujfCxiGleGDL6FzbtQZd
 Sfzv7fWXMoRgAHN8sc7sJTD9u9gwkCDvv4dScQF3FZ32dMTgbTJET7CPbTDovsFs
 S9fDdxA03+ptXkLaK4wm4B/OluGyw3VGCzkjkkcvAxE5MJxujzoO7vxAJmEJJca2
 5ckCpAt/Y0GKqMTUMCMSYIwycur3mE4m/zjN98t65+nYJUilVeGjox+KqWctVkUu
 Bd60fz+8VBdt9v9UDoU7PvNfNRBeTBjNYYXjHKWaDv7wX+pGS2FG/BeR616We32C
 JgHIIPmL4v8tHO7fP+iX37RRu5lbVwmKfJXDezuZIn8YN2hgbkMr1pDjw311G7dX
 CvfC5wT7apavTX/TbFFJVYOF9swnk7eozD+BW1OvN3RBTcfJ0PqBsBGQR61p/O9t
 /Q8pY5cHKY//4xU072mc
 =07Gg
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20170717-pull-request' into staging

ehci fix for 2.10

# gpg: Signature made Mon 17 Jul 2017 10:40:00 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20170717-pull-request:
  ehci: add sanity check for maxframes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17 17:54:17 +01:00
Gerd Hoffmann
2a7f263068 ehci: add sanity check for maxframes
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170703111549.10924-1-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-07-17 11:39:08 +02:00
Peter Maydell
6c6076662d * gdbstub fixes (Alex)
* IOMMU MemoryRegion subclass (Alexey)
 * Chardev hotswap (Anton)
 * NBD_OPT_GO support (Eric)
 * Misc bugfixes
 * DEFINE_PROP_LINK (minus the ARM patches - Fam)
 * MAINTAINERS updates (Philippe)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJZaJejAAoJEL/70l94x66DwQ4H/0NUvh/Zfs64wE1iuZJACc24
 1za02fFaB50vFDwQKWbM0GkHzDxoXBHk4Rvn92p+VSxpKtaAX4GRwCvxRA5GeUtm
 GAYbdIJUe0UELepKExrlUVzQcK9VfljoJpK3dZkP5Zzx83L2PAI/SexrZRibN2Uf
 yRI60uvlsMWU12nenzdVnYORd+TWDNKele7BhMrX/FX9wxaS1PlnsnKZggy6CU7G
 8dwZJAZJ/s5tRGXyXyAQzLm5JZQCLnA6jxya540TbPeciFgbvvS2ydIitZ54vSPO
 VtmZ1rSWfTEbNF5xGD1Ztu8aAENr5/I05l6IjxZd45BdUCW3HxeJkc+7lE0K4uk=
 =wnVs
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* gdbstub fixes (Alex)
* IOMMU MemoryRegion subclass (Alexey)
* Chardev hotswap (Anton)
* NBD_OPT_GO support (Eric)
* Misc bugfixes
* DEFINE_PROP_LINK (minus the ARM patches - Fam)
* MAINTAINERS updates (Philippe)

# gpg: Signature made Fri 14 Jul 2017 11:06:27 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (55 commits)
  spapr_rng: Convert to DEFINE_PROP_LINK
  cpu: Convert to DEFINE_PROP_LINK
  mips_cmgcr: Convert to DEFINE_PROP_LINK
  ivshmem: Convert to DEFINE_PROP_LINK
  dimm: Convert to DEFINE_PROP_LINK
  virtio-crypto: Convert to DEFINE_PROP_LINK
  virtio-rng: Convert to DEFINE_PROP_LINK
  virtio-scsi: Convert to DEFINE_PROP_LINK
  virtio-blk: Convert to DEFINE_PROP_LINK
  qdev: Add const qualifier to PropertyInfo definitions
  qmp: Use ObjectProperty.type if present
  qdev: Introduce DEFINE_PROP_LINK
  qdev: Introduce PropertyInfo.create
  qom: enforce readonly nature of link's check callback
  translate-all: remove redundant !tcg_enabled check in dump_exec_info
  vl: fix breakage of -tb-size
  nbd: Implement NBD_INFO_BLOCK_SIZE on client
  nbd: Implement NBD_INFO_BLOCK_SIZE on server
  nbd: Implement NBD_OPT_GO on client
  nbd: Implement NBD_OPT_GO on server
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14 12:16:09 +01:00
Anton Nefedov
3065070153 char: avoid chardevice direct access
frontends should avoid accessing CharDriver struct where possible

Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-6-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 11:04:33 +02:00
Anton Nefedov
81517ba37a char: add backend hotswap handler
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits

Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 11:04:33 +02:00
Alistair Francis
3dc6f86936 Convert error_report() to warn_report()
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.

All of the warnings were changed using these two commands:
    find ./* -type f -exec sed -i \
      's|error_report(".*warning[,:] |warn_report("|Ig' {} +

Indentation fixed up manually afterwards.

The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-13 13:49:58 +02:00
Mao Zhongyi
9a815774bb pci: Fix the wrong assertion.
pci_add_capability returns a strictly positive value on success,
correct asserts.

Cc: dmitry@daynix.com
Cc: jasowang@redhat.com
Cc: kraxel@redhat.com
Cc: alex.williamson@redhat.com
Cc: armbru@redhat.com
Cc: marcel@redhat.com
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03 22:29:49 +03:00
Halil Pasic
d2164ad35c vmstate: error hint for failed equal checks
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug,
but it's actually the best we can do. Especially in these cases a verbose
error message is required.

Let's introduce infrastructure for specifying a error hint to be used if
equal check fails. Let's do this by adding a parameter to the _EQUAL
macros called _err_hint. Also change all current users to pass NULL as
last parameter so nothing changes for them.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>

Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28 11:18:44 +02:00
Peter Maydell
e18a639164 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJZSpQSAAoJEEy22O7T6HE4zxgP/3SSjpgTn7dVbnCe9UuZ+n9A
 WvjzxidVm4FMtpt6ILsyf0ZU7ky+YO3jas54ngqnWFb31H5MnQohhnVM/Jlkg5aa
 w3Pe4J6KF0vQozTMcj7ZAQAEUJhbPCqctTRSngTG8LtAH25al9NBj0EvAusf5Q4E
 JmSH8WyFuYws/O9OQnAg/esvYZ/1g5MZy+XHDOMnnJQCSB9x+Q8Frved/XN2KhoS
 UIfqAqn/9s2glwOqGyG6KCZGpgk/V3KuDOgXbxiDM95fZX6CiNKyVWDmVNOUYClg
 CIdWkE720iq+kj2xP1Q1QyWzZr4iSBREwZ37DfgBYLgu3i1QWNPsQCpKncQE8nIk
 sSR+J4AE5omTjyR4Bu+oFqGcF/bieysXWK/VjEbmq6UJ3/10eMpQijGvOF2VxsUS
 rVnizE+BdQojsVWPXLN2l3tUs6v4TDClXiu6D0M/FlShiKU5wccmArKoF+ipzA/n
 tueZcwTiSZ6YbSbBa7m/U3WNl8Vh6yOoaGndX4R7uJ/bX1Eld4OaTGJJ1NbpTNlA
 ESEzohn5SMLBlMOC1J1mDld3z0CqmlGUmRUUB8lQt5bHF0lSPQ5we9ZiHcK4pmmT
 DJIkus+45REQJ1eqNhZsbvpEpUKoRws2JQq+nsb0Jrr7sMEMv404cm0eI0e12OdI
 aJwhowDec4mDK9DSjyUB
 =zplk
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20170621-pull-request' into staging

# gpg: Signature made Wed 21 Jun 2017 16:43:14 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20170621-pull-request:
  usb-host: support devices with sparse/non-sequential USB interfaces

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-22 15:09:48 +01:00
Peter Maydell
84e3d0725b QAPI patches for 2017-06-09
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZSRWrAAoJEDhwtADrkYZTVOQP/RK8br2A1Cn7LeVG6jnKz5hJ
 OqyII77x8I2RachWvnwxQeHPMEVDuz3y2WjL+80s6peXlpR6y/13w7oX0f6aiJuo
 +T9khTqMv2I7HsM5UCsXAJpFPHT7r90b4x8nstY80YLGe7lA7L6yk6PGyCxHThwA
 mOiTKDw6/Xb/yZGrS2Favrun7juNpAs0Ec1IAkaA8xsEgVkd6tDv281rmHqvibl/
 //90VfJp3nHFZ12FCQ1HzA42Eigtmo/fIk9LnAzBoYG0zw0cnzjuv0BNzs/JwuUZ
 /VskeD1cViQ4yzFnPpjOavjYjTN854/JTJzm7gZ7dTQ6/l3ykoY6NDE8p1BLuHlC
 p2RKkg20EeZlpOEtMQ4g6iyG6EUxaKcEiXmQ31LqN/LJwxTYbo5B5nCHMjrt4gxe
 MqFBJQSNsJ7QjZ7Qa7pADMCi/G0m7/0dN8vBqSr4vcbLVvdbw/yb/9s33wXGrUj1
 PyXM2ymi+vvSqcXtNXKshsJLxJSJxO1tm2tRIANDTabQ00yxs8dOYnQnbQFR94fp
 6nrE2PnjZqgqk69aNDJEbngj6Tgx44nyTr1+Q17juZf9nTCE5QmBE1J0IRoykCJn
 E8+T63ZxtIxVV2yLi5xBjmZaZtPyJRGGeUXunA10SuWrHzupEcBuhFhFYd2MFM5L
 fsojALN2K3Gdx2+CmAo2
 =O9Vv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging

QAPI patches for 2017-06-09

# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
  tests/qdict: check more get_try_int() cases
  console: use get_uint() for "head" property
  i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
  numa: use get_uint() for "size" property
  pnv-core: use get_uint() for "core-pir" property
  pvpanic: use get_uint() for "ioport" property
  auxbus: use get_uint() for "addr" property
  arm: use get_uint() for "mp-affinity" property
  xen: use get_uint() for "max-ram-below-4g" property
  pc: use get_uint() for "hpet-intcap" property
  pc: use get_uint() for "apic-id" property
  pc: use get_uint() for "iobase" property
  acpi: use get_uint() for "pci-hole*" properties
  acpi: use get_uint() for various acpi properties
  acpi: use get_uint() for "acpi-pcihp-io*" properties
  platform-bus: use get_uint() for "addr" property
  bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
  aspeed: use {set, get}_uint() for "ram-size" property
  pcihp: use get_uint() for "bsel" property
  pc-dimm: make "size" property uint64
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-22 11:34:39 +01:00
Samuel Brian
896b6757f9 usb-host: support devices with sparse/non-sequential USB interfaces
Some USB devices have sparse interface numbering which is not able to be
passthroughed.
For example, the Sierra Wireless MC7455/MC7430:

  # lsusb  -D /dev/bus/usb/003/003 | egrep '1199|9071|bNumInterfaces|bInterfaceNumber'
  Device: ID 1199:9071 Sierra Wireless, Inc.
    idVendor           0x1199 Sierra Wireless, Inc.
    idProduct          0x9071
      bNumInterfaces          5
        bInterfaceNumber        0
        bInterfaceNumber        2
        bInterfaceNumber        3
        bInterfaceNumber        8
        bInterfaceNumber       10

In this case, the interface numbers are 0, 2, 3, 8, 10 and not the
0, 1, 2, 3, 4 that QEMU tries to claim.

This change allows sparse USB interface numbering.
Instead of only claiming the interfaces in the range reported by the USB
device through bNumInterfaces, QEMU attempts to claim all possible
interfaces.

v2 to fix broken v1 patch formatting.
v3 to fix indentation.

Signed-off-by: Samuel Brian <sam.brian@accelerated.com>
Message-id: 20170613234039.27201-1-sam.brian@accelerated.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-06-21 15:30:08 +02:00
Marc-André Lureau
01b2ffcedd qapi: merge QInt and QFloat in QNum
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.

Add a few more tests while at it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20 14:31:31 +02:00
Gerd Hoffmann
ad3c5412f2 ehci: stop recursive calls to ehci_work_bh
Can happen with usb-storage devices: ehci_work_bh calls usb-storage,
usb-storage calls into block layer, block layer may run BHs.

Add a simple bool and just do nothing in case we figure ehci_work_bh is
active.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170612073109.25930-1-kraxel@redhat.com
2017-06-13 12:17:33 +02:00
Gerd Hoffmann
d54fddea98 xhci: only update dequeue ptr on completed transfers
The dequeue pointer should only be updated in case the transfer
is actually completed.  If we update it for inflight transfers
we will not pick them up again after migration, which easily
triggers with HID devices as they typically have a pending
transfer, waiting for user input to happen.

Fixes: 243afe858b
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451631
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 20170608074122.32099-1-kraxel@redhat.com
2017-06-12 16:14:04 +02:00
Marc-André Lureau
1ce2610c10 char: make chr_fe_deinit() optionaly delete backend
This simplifies removing a backend for a frontend user (no need to
retrieve the associated driver and separate delete call etc).

NB: many frontends have questionable handling of ending a chardev. They
should probably delete the backend to prevent broken reusage.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:33:53 +04:00
Marc-André Lureau
4d43a603c7 char: move CharBackend handling in char-fe unit
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.

Make qemu_chr_replay() a macro shared by both char and char-fe.

Export qemu_chr_write(), and use a macro for qemu_chr_write_all()

(nb: yes, CharBackend is for char frontend :)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:33:53 +04:00
Marc-André Lureau
7566c6efe7 chardev: serial & parallel declaration to own headers
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:33:52 +04:00
Marc-André Lureau
8228e353d8 chardev: move headers to include/chardev
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:33:52 +04:00
Marc-André Lureau
f664b88247 Remove/replace sysemu/char.h inclusion
Those are apparently unnecessary includes.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:33:52 +04:00
Gerd Hoffmann
3bfecee2cb ehci: fix frame timer invocation.
ehci registers ehci_frame_timer as both timer and bottom half, which
turned out to be a bad idea as it can be called as bottom half then
while it is running as timer, and it isn't prepared to handle recursive
calls.

Change the timer func to just schedule the bottom half to avoid this.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1449609
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170519120428.25981-1-kraxel@redhat.com
2017-05-29 14:19:16 +02:00
Gerd Hoffmann
26022652c6 usb: don't wakeup during coldplug
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1452512
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170523084635.20062-1-kraxel@redhat.com
2017-05-29 14:18:09 +02:00
Ladi Prosek
6361bbc7e2 usb-hub: set PORT_STAT_C_SUSPEND on host-initiated wake-up
PORT_STAT_C_SUSPEND should be set even on host-initiated wake-up,
i.e. on ClearPortFeature(PORT_SUSPEND). Windows is known to not
work properly otherwise.

Side note, since PORT_ENABLE looks similar and might appear to
have the same issue: According to 11.24.2.7.2.2 C_PORT_ENABLE:

  "This bit is set when the PORT_ENABLE bit changes from one to
  zero as a result of a Port Error condition (see Section 11.8.1).
  This bit is not set on any other changes to PORT_ENABLE."

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 20170522123325.2199-1-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-29 14:17:59 +02:00
Gerd Hoffmann
2da077a881 xhci: add CONFIG_USB_XHCI_NEC option
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451189
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170517103313.8459-2-kraxel@redhat.com
2017-05-29 14:03:36 +02:00
Gerd Hoffmann
0bbb2f3df1 xhci: split into multiple files
Moved structs and defines to hcd-xhci.h.
Move nec controller variant to hcd-xhci-nec.c.
No functional changes.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170517103313.8459-1-kraxel@redhat.com
2017-05-29 14:03:35 +02:00
Thomas Huth
e14935df26 usb: Simplify the parameter parsing of the legacy usb serial device
Coverity complains about the current code, so let's get rid of
the now unneeded while loop and simply always emit "unrecognized
serial USB option" for all unsupported options.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1495177204-16808-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-29 14:03:35 +02:00
Gerd Hoffmann
3ae7eb88c4 ehci: fix overflow in frame timer code
In case the frame timer doesn't run for a while due to the host being
busy skipped_uframes can become big enough that UFRAME_TIMER_NS *
skipped_uframes overflows.  Which in turn throws off all subsequent
ehci frame timer calculations.

Reported-by: 李林 <8610_28@163.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170515104543.32044-1-kraxel@redhat.com
2017-05-29 14:03:35 +02:00
Stefan Hajnoczi
8a813c9868 usb: bugfixes, doc update
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJZFaiNAAoJEEy22O7T6HE4CxUP/3EdVQfz9z/wipB1Jkd4BI4h
 joWw5mY2EVx8oTtVfmCbPogBzKkcBXYhnYciJWoDmdMB3DsPsOnWLu407M8P9Nq9
 dVCey7Qhv3acC8ZP3L/GlUs+RQ/lNEq+TPvnM4/1IhatKOf13XYxTMamzMCdg4XM
 wroH240EER2b7qMN9im1G0ETAzfHfdMPpVF2taPa3kxCNHKwcJQGMVoPnGIO0Cxp
 mXuNqNkVkd1+UYurJ1PI8/mr/nkUcaLamfmf4H3hZL/mvls+YBK4CH+QVQVF/X6L
 YGRlDM3QNCuNX4SJIYwvYI4pEAM6S4+RHKdkoKNRP3svFryBlJCuMDPyTYQVMrYT
 jACZWxto7LC9uOzlNZoCs9zIpbqSVIcyFT3o5lNKRvIWg6dR2M6ehCRXZox5w1Jd
 8GEmdPN4y1yrKKKhEHzUfQQQngXQQ+9iHJSE+oGvtVOUenYTzzIbT4s0wWvBs7gL
 d4mEcAvlaUe1wpPm4SwoHtr2XqSC9LV6o/czLh5iRnSkzPirt96owTCLZMbi5C53
 k3mmtpSKk9BnuWOWkKvKAToLjhO847D6NXvCn5XeUddxr0aGSAXjzuqj+Nd1ZYSC
 UwhXXPCoLnZ8c4rw8BRY+PpZd1NR0BlmuqRTIrb5hXNBM7o9rN+KLkZgqtDK2qaD
 wLQvGszzgbWaTTE7p0mZ
 =grov
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'kraxel/tags/pull-usb-20170512-1' into staging

usb: bugfixes, doc update

# gpg: Signature made Fri 12 May 2017 01:20:29 PM BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* kraxel/tags/pull-usb-20170512-1:
  hw/usb/dev-serial: Do not try to set vendorid or productid properties
  xhci: relax link check
  usb-hub: clear PORT_STAT_SUSPEND on wakeup
  xhci: fix logging
  usb-redir: fix stack overflow in usbredir_log_data
  qemu-doc: Update to use the new way of attaching USB devices

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-15 14:29:58 +01:00
Thomas Huth
aa612b364e hw/usb/dev-serial: Do not try to set vendorid or productid properties
When starting QEMU with the legacy USB serial device like this:

 qemu-system-x86_64 -usbdevice serial:vendorid=0x1234:stdio

it currently aborts since the vendorid property does not exist
anymore (it has been removed by commit f29783f72e):

 Unexpected error in object_property_find() at qemu/qom/object.c:1008:
 qemu-system-x86_64: -usbdevice serial:vendorid=0x1234:stdio: Property
                     '.vendorid' not found
 Aborted (core dumped)

Fix this crash by issuing a more friendly error message instead
(and simplify the code also a little bit this way).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1493883704-27604-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-12 12:30:23 +02:00
Ladi Prosek
99f9aeba5d xhci: relax link check
The strict td link limit added by commit "05f43d4 xhci: limit the
number of link trbs we are willing to process" causes problems with
Windows guests. Let's raise the limit.

This change is analogous to:

  commit ab6b1105a2
  Author: Gerd Hoffmann <kraxel@redhat.com>
  Date:   Tue Mar 7 09:40:18 2017 +0100

      ohci: relax link check

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 20170512102100.22675-1-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-12 12:26:40 +02:00
Ladi Prosek
66849dcfbe usb-hub: clear PORT_STAT_SUSPEND on wakeup
The spec says:

  Suspend: (PORT_SUSPEND) This field indicates whether or not the device
  on this port is suspended. Setting this field causes the device to
  suspend by not propagating bus traffic downstream. This field may be
  reset by a request or by resume signaling from the device attached to
  the port.

I can't find any specific statement like "the PORT_SUSPEND field is reset
automatically on remote wakeup", but without this patch, the only way to
reset it is via the ClearPortFeature request so the ".. or by resume
signaling from the device" clause is clearly not implemented on the remote
wakeup path.

The default xhci Windows driver does not issue the ClearPortFeature request
and suspended devices attached to a hub don't properly get out of the
suspended state. Interestingly, the default uhci Windows driver *does*
issue the ClearPortFeature request and does not exhibit this problem.

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 20170511125314.24549-3-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-12 12:26:40 +02:00
Ladi Prosek
ee56264af8 xhci: fix logging
slotid and epid were deleted from XHCITransfer in commit d6fcb29.
Also deleting one unused forward declaration.

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 20170511125314.24549-2-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-12 12:26:40 +02:00
Gerd Hoffmann
bd4a683505 usb-redir: fix stack overflow in usbredir_log_data
Don't reinvent a broken wheel, just use the hexdump function we have.

Impact: low, broken code doesn't run unless you have debug logging
enabled.

Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170509110128.27261-1-kraxel@redhat.com
2017-05-12 12:26:40 +02:00
Stefan Hajnoczi
f465706e59 trivial patches for 2017-05-10
-----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAlkSvwIPHG1qdEB0bHMu
 bXNrLnJ1AAoJEHAbT2saaT5Zys4IAMZLWicv1c7O3m1ajmmg7iGfRbsajcx9FSBi
 NxdrqG3zgV10gz8/R7goMYGkeFs8MAoDfagbBkXgwFgA31M+ecOe93XyoOQLpe9/
 43fx2u8exVdruIb60F5yDEd51RLwK2C4Iz7SVNRoVWMqDcMOCuC+WBog+AbTB0V+
 19RjhKStMyXMXPYVO0bLhQIcH+ixFLUljbpwDvz5FKor5NqGG+FzHjmwYciiTbr3
 o7Z3OIMWT7rDr9V5/553miiNP9ufG3fJreMyXDrTkFRVmDZaqRBp+tvdrYcb77ed
 /DDxC5vafgCRzwsrmCIsIQXV0janFGDQiqbR+hzBMBG1RTRoBiM=
 =AAfU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mjt/tags/trivial-patches-fetch' into staging

trivial patches for 2017-05-10

# gpg: Signature made Wed 10 May 2017 03:19:30 AM EDT
# gpg:                using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* mjt/tags/trivial-patches-fetch: (23 commits)
  tests: Remove redundant assignment
  MAINTAINERS: Update paths for AioContext implementation
  MAINTAINERS: Update paths for main loop
  jazz_led: fix bad snprintf
  tests: Ignore another built executable (test-hmp)
  scripts: Switch to more portable Perl shebang
  scripts/qemu-binfmt-conf.sh: Fix shell portability issue
  virtfs: allow a device id to be specified in the -virtfs option
  hw/core/generic-loader: Fix crash when running without CPU
  virtio-blk: Remove useless condition around g_free()
  qemu-doc: Fix broken URLs of amnhltm.zip and dosidle210.zip
  use _Static_assert in QEMU_BUILD_BUG_ON
  channel-file: fix wrong parameter comments
  block: Make 'replication_state' an enum
  util: Use g_malloc/g_free in envlist.c
  qga: fix compiler warnings (clang 5)
  device_tree: fix compiler warnings (clang 5)
  usb-ccid: make ccid_write_data_block() cope with null buffers
  tests: Ignore more test executables
  Add 'none' as type for drive's if option
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-10 12:31:19 -04:00
Eric Blake
46f5ac205a qobject: Use simpler QDict/QList scalar insertion macros
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.

Patch created mechanically via:
  spatch --sp-file scripts/coccinelle/qobject.cocci \
    --macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-09 09:13:51 +02:00
Philippe Mathieu-Daudé
6b1de1484e usb-ccid: make ccid_write_data_block() cope with null buffers
static code analyzer complain:

hw/usb/dev-smartcard-reader.c:816:5: warning: Null pointer passed as an argument to a 'nonnull' parameter
    memcpy(p->abData, data, len);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-05-07 09:57:51 +03:00
Marc-André Lureau
2f5d45a150 char: add a /chardevs container
Add a /chardevs container object to hold the list of chardevs.
(Note: QTAILQ chardevs is going away in the following commits)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-05-04 15:34:41 +04:00
Peter Maydell
52e94ea5de Xen 2017/04/21 + fix
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJY/5EdAAoJEIlPj0hw4a6QHj8P/1D3iZq8vKyLvnkioYC00ao8
 dhuCFV1Dk0dl/QXvDXxNAHFqmHp2PzHeHF2V19bTbUh9QnY3WH9aSsMQ7YVPDzLb
 6ZezbxXd1l8+IOrWh+ch+x6jiUpRAeHGjhSpFxQEmH5THBmPtLHBFhAeeGpVq6CT
 MPFlN0mr1snyMMbK2aKCVTHgh5Wip83/t/kijIq4RmPwXdJbwxx55PL8jxC/NZHq
 /NbAZzAT149fmItfBNnsRTfNoDs7fSmgM9VelYsnJNHs6qkYYfewxys4vudePG8n
 ZcjCXMv9vdCSTfXfYY9nxhfGCgkkRSvBWrzARRIUPxTXGAmEU52LJrccpG9AEFRZ
 Kgz1JYr0y+u/g+RsCJvAglvmciawXgZH8GIR4sFl2iv4u6cx8PxNRgjTdt7YX4Je
 V7+scmOLB0U5wkI7PUcPV1v2fwKJHFfMdyik257otfMCJiTCnWGJfCZGR4JAdy3C
 NHuG4eIj2XLjZ7IQIo3mg+EfdCWdfVMKtXj0MAFsP6Kcr6sY/ef5sx/wB61k3NU1
 Y4ctI/LAOONsjlC2yzJ4aZR4LgyFcVcwx8FKOK7niCcCgVLYGWpyiHU3kFKYlmKM
 FKIlGPPOK8WuRV9NUGDI9A8XENyFXGyiR2xGCotfgHj+FSSqRzhKH4ecfgNimJVY
 wjTzZmBa68pLHdXaJ+SV
 =OfeB
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170421-v2-tag' into staging

Xen 2017/04/21 + fix

# gpg: Signature made Tue 25 Apr 2017 19:10:37 BST
# gpg:                using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg:                 aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits)
  move xen-mapcache.c to hw/i386/xen/
  move xen-hvm.c to hw/i386/xen/
  move xen-common.c to hw/xen/
  add xen-9p-backend to MAINTAINERS under Xen
  xen/9pfs: build and register Xen 9pfs backend
  xen/9pfs: send responses back to the frontend
  xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal
  xen/9pfs: receive requests from the frontend
  xen/9pfs: connect to the frontend
  xen/9pfs: introduce Xen 9pfs backend
  9p: introduce a type for the 9p header
  xen: import ring.h from xen
  configure: use pkg-config for obtaining xen version
  xen: additionally restrict xenforeignmemory operations
  xen: use libxendevice model to restrict operations
  xen: use 5 digit xen versions
  xen: use libxendevicemodel when available
  configure: detect presence of libxendevicemodel
  xen: create wrappers for all other uses of xc_hvm_XXX() functions
  xen: rename xen_modified_memory() to xen_hvm_modified_memory()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26 10:22:31 +01:00
Fam Zheng
021c9d25b3 error: Apply error_propagate_null.cocci again
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-15-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-24 09:13:45 +02:00
Stefano Stabellini
f65eadb639 xen: import ring.h from xen
Do not use the ring.h header installed on the system. Instead, import
the header into the QEMU codebase. This avoids problems when QEMU is
built against a Xen version too old to provide all the ring macros.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
CC: anthony.perard@citrix.com
CC: jgross@suse.com
2017-04-21 12:41:29 -07:00
Gerd Hoffmann
102a3d8478 usb-host: switch to LIBUSB_API_VERSION
libusbx doesn't exist any more, the fork got merged back to libusb.  So
stop using LIBUSBX_API_VERSION and use LIBUSB_API_VERSION instead.  For
backward compatibility alias LIBUSB_API_VERSION to LIBUSBX_API_VERSION
in case we figure LIBUSB_API_VERSION isn't defined.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170403105238.23262-1-kraxel@redhat.com
2017-04-03 14:41:23 +01:00
Gerd Hoffmann
243afe858b xhci: flush dequeue pointer to endpoint context
When done processing a endpoint ring we must update the dequeue pointer
in the endpoint context in guest memory.  This is needed to make sure
the guest has a correct view of things and also to make live migration
work properly, because xhci post_load restores alot of the state from
xhci data structures in guest memory.

Add xhci_set_ep_state() call to do that.

The recursive calls stopped by commit
ddb603ab6c had the (unintentional) side
effect to hiding this bug.  xhci_set_ep_state() was called before
processing, to set the state to running, which updated the dequeue
pointer too.

Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20170331102521.29253-1-kraxel@redhat.com
2017-04-03 11:40:57 +02:00
Stefano Stabellini
6b827cca9a xen: do not build backends for targets that do not support xen
Change Makefile.objs to use CONFIG_XEN instead of CONFIG_XEN_BACKEND, so
that the Xen backends are only built for targets that support Xen.

Set CONFIG_XEN in the toplevel Makefile to ensure that files that are
built only once pick up Xen support properly.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
CC: pbonzini@redhat.com
CC: peter.maydell@linaro.org
CC: rth@twiddle.net
CC: stefanha@redhat.com
Message-Id: <1489694518-16978-1-git-send-email-sstabellini@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-19 11:12:12 +01:00
Gerd Hoffmann
ab6b1105a2 ohci: relax link check
The strict td link limit added by commit "95ed569 usb: ohci: limit the
number of link eds" causes problems with macos guests.  Lets raise the
limit.

Reported-by: Programmingkid <programmingkidx@gmail.com>
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 1488876018-31576-1-git-send-email-kraxel@redhat.com
2017-03-09 09:46:13 +01:00
Peter Maydell
251501a371 Migration pull
Note: The 'postcopy: Update userfaultfd.h header' is part of
 Paolo's header update and will disappear if applied after it.
 
 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYtW9KAAoJEAUWMx68W/3nF/MQAIaMjoCkeVnCZsGCJ2VbJZcZ
 Fb5gMNjnHUKwOeDhGuSBP7FGRMalYM2JNRufSiBZnUowCQMXi3Emjad6pGUiPTr0
 B+L1czjw0FDdskQpE1U/StdruLiYBJ98oktnjlla00f+E9rylY0cMmrHpmqfRwDn
 IXTa4qm77aw47Y2MYku1nce27gjA3JEko6Lg2fB7gTtwYzTi/uRrKa+ilbnTPoEZ
 /ZzK8hcUYiV8oDAOtEmKSG3Azo+6ylzDG4r/ldwEecJPhZxeUk39AhDOoU0mx98N
 OE8oOk2t/0Bo+mS7iOw9gZ8sr9p5L2myQkmoxxLuAXAcD9sHVlcp0eKi5lLYNmUa
 oWnnYo3QeCvqrcZzhvSX0b4rLXoY4GP+qKpQo21eKIPEyq3v6EDhrk10UCTXaiBO
 zxHblLgXSrX6VqYcEJGj2oUR/RjH9ouw3hjI5cDy/d/hRmNLCl8lwvPmVmv3tRer
 6X1gcZSUs6hY/drs2/v6maJ0CqK/bx6/OBfkiUJUEN4Dg1ldgO2r1v8pBLukvM6c
 De2aNRezl821HK487EvRlluUq0nO6L3LkqDTBql4/4Rf4HoTRXxoJ68sB0LBqym5
 PwD/C3mQuvlWg8tKJtaHVtS0ESuSCSroaSk1FB648mSs8nJYYFjstc/XovuePqTl
 6UT2OQbUdWITILoWSlI5
 =PCYv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170228a' into staging

Migration pull

Note: The 'postcopy: Update userfaultfd.h header' is part of
Paolo's header update and will disappear if applied after it.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Tue 28 Feb 2017 12:38:34 GMT
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20170228a: (27 commits)
  postcopy: Add extra check for COPY function
  postcopy: Add doc about hugepages and postcopy
  postcopy: Check for userfault+hugepage feature
  postcopy: Update userfaultfd.h header
  postcopy: Allow hugepages
  postcopy: Send whole huge pages
  postcopy: Mask fault addresses to huge page boundary
  postcopy: Load huge pages in one go
  postcopy: Use temporary for placing zero huge pages
  postcopy: Plumb pagesize down into place helpers
  postcopy: Record largest page size
  postcopy: enhance ram_block_discard_range for hugepages
  exec: ram_block_discard_range
  postcopy: Chunk discards for hugepages
  postcopy: Transmit and compare individual page sizes
  postcopy: Transmit ram size summary word
  migration: fix use-after-free of to_dst_file
  migration: Update docs to discourage version bumps
  migration: fix id leak regression
  migrate: Introduce a 'dc->vmsd' check to avoid segfault for --only-migratable
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-02 17:39:12 +00:00
Peter Maydell
c9fc677a35 -----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJYto49AAoJENro4Ql1lpzljb8P/RutuV92h/e/RvIQ00gIE1Tk
 Tdma/9HpobMtutScp7xCbSjDCaFBHtk8YFmdbPwcwLpNIg9RGUs5cCTVEPvT8nq3
 XRrUFtCzZua4U4CKLOAbo53bDN2x36r6rHSpX7FaYvC51o47MNFS2fpKJ5R8Rg4s
 v9i9zM6bWGYzNbBnK4XDi251/7r8yK2g3okBEZao5TDwBUCtimbwfXn9E/iB21XD
 HJJRZGIkgCFXebCbPzLfob8NxQi0whuJW6N9XscJOy1AKDTfGT4QUsUUkPUZNRVe
 lbGjoGJnq5XYMO+9OWJzaSf6ecFFQT/Seu5P6xLb3SRgdT9IXISouPt9sOsYlM7R
 U/Sw34gPKb2979gASLs2NPbrTPHBQp0hdL8E01LRFjdGVHuvgZcGr0OdxpbUSkEf
 nJgtBFpLVQdL+qtdQtxgSBZz0/hWMIRcXB++MCPfpWpP9uBUErr4/XQN2rfqLLUM
 UgA/doDMX7Hc9m81mZ+h+Pji+9O8zWjt7NKJXgPeZPsUsMbUe05VzAl3Fp4khEWM
 05hrFB5biQguXkHXBIKO/fWwaftRaatqy0qAvXaiKidcRzQjF9ohlZgWd/CJyAWz
 V4GocO2oZL3rxQXwW6kh3HKlMCWUj563FhT4V5eN8VQE5PWLQQ+ObBkRHWfyayRE
 eEFFYApPQRVibAo9U7mC
 =09RR
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/elmarco/tags/leak-pull-request' into staging

# gpg: Signature made Wed 01 Mar 2017 09:02:53 GMT
# gpg:                using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* remotes/elmarco/tags/leak-pull-request: (28 commits)
  tests: fix virtio-blk-test leaks
  tests: add specialized device_find function
  tests: fix usb-test leaks
  tests: allows to run single test in usb-hcd-ehci-test
  usb: release the created buses
  bus: do not unref hotplug handler
  tests: fix virtio-9p-test leaks
  tests: fix virtio-scsi-test leak
  tests: fix e1000e leaks
  tests: fix i440fx-test leaks
  tests: fix e1000-test leak
  tests: fix tco-test leaks
  tests: fix eepro100-test leak
  pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice
  tests: fix ipmi-bt-test leak
  tests: fix ipmi-kcs-test leak
  tests: fix bios-tables-test leak
  tests: fix hd-geo-test leaks
  tests: fix ide-test leaks
  tests: fix vhost-user-test leaks
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-02 15:25:37 +00:00
Marc-André Lureau
cd7bc87868 usb: release the created buses
Leaks spotted by ASAN.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-03-01 11:51:29 +04:00
Kevin Wolf
a17c17a274 hw/block: Request permissions
This makes all device emulations with a qdev drive property request
permissions on their BlockBackend. The only thing we block at this point
is resizing images for some devices that can't support it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28 20:40:36 +01:00
Ashijeet Acharya
7562f90707 migrate: Introduce a 'dc->vmsd' check to avoid segfault for --only-migratable
Commit a3a3d8c7 introduced a segfault bug while checking for
'dc->vmsd->unmigratable' which caused QEMU to crash when trying to add
devices which do no set their 'dc->vmsd' yet while initialization.
Place a 'dc->vmsd' check prior to it so that we do not segfault for
such devices.

NOTE: This doesn't compromise the functioning of --only-migratable
option as all the unmigratable devices do set their 'dc->vmsd'.

Introduce a new function check_migratable() and move the
only_migratable check inside it, also use stubs to avoid user-mode qemu
build failures.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1487009088-23891-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:22 +00:00
Gerd Hoffmann
4f72b8d2a6 xhci: properties cleanup
Split xhci properties into common and nec specific.

Move the backward compat flags to nec, so the new qemu-xhci
devices doesn't carry on the compatibiity stuff.

Move the msi/msix switches too and just enable msix for qemu-xhci.

Also move the intrs and slots properties.  Wasn't a great idea to
make them configurable in the first place, nobody needs this.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1487663432-10410-1-git-send-email-kraxel@redhat.com
2017-02-23 16:18:03 +01:00
Li Qiang
6ebc069d67 usb: ohci: fix error return code in servicing td
It should return 1 if an error occurs when reading td.
This will avoid an infinite loop issue in ohci_service_ed_list.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1487760990-115925-1-git-send-email-liqiang6-s@360.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-23 16:18:03 +01:00
Marc-André Lureau
c4fe9700e6 usb: replace handle_destroy with unrealize
Curiously, unrealize() is not being used, but it seems more
appropriate than handle_destroy() together with realize(). It is more
ubiquitous destroy name in qemu code base and may throw errors.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170221141451.28305-25-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-23 15:40:19 +01:00
Gerd Hoffmann
31fb4444a4 usb-ccid: add check message size checks
Check message size too when figuring whenever we should expect more data.
Fix debug message to show useful data, p->iov.size is fixed anyway if we
land there, print how much we got meanwhile instead.

Also check announced message size against actual message size.  That
is a more general fix for CVE-2017-5898 than commit "c7dfbf3 usb: ccid:
check ccid apdu length".

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487250819-23764-4-git-send-email-kraxel@redhat.com
2017-02-21 08:11:43 +01:00
Gerd Hoffmann
7569c54642 usb-ccid: move header size check
Move up header size check, so we can use header fields in sanity checks
(in followup patches).  Also reword the debug message.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487250819-23764-3-git-send-email-kraxel@redhat.com
2017-02-21 08:11:43 +01:00
Gerd Hoffmann
0aeebc73b7 usb-ccid: better bulk_out error handling
Add err goto label where we can jump to from all error conditions.
STALL request on all errors.  Reset position on all errors.

Normal request processing is not in a else branch any more, so this code
is reintended, there are no code changes in that part of the code
though.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487250819-23764-2-git-send-email-kraxel@redhat.com
2017-02-21 08:11:43 +01:00
Gerd Hoffmann
558ff1b6ef xhci: drop via vendor command handling
Seems pretty pointless, we don't emulate an via xhci controller.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1486382139-30630-5-git-send-email-kraxel@redhat.com
2017-02-21 08:11:43 +01:00
Gerd Hoffmann
2992d6b49c xhci: fix nec vendor quirk handling
Only the TYPE_NEC_XHCI controller will have the nec vendor quirks.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1486382139-30630-4-git-send-email-kraxel@redhat.com
2017-02-21 08:11:43 +01:00
Gerd Hoffmann
72a810f411 xhci: add qemu xhci controller
Turn existing TYPE_XHCI into an abstract base class.
Create two child classes, TYPE_NEC_XHCI (same name as old xhci
controller) and TYPE_QEMU_XHCI (using an ID from our namespace).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Message-id: 1486382139-30630-3-git-send-email-kraxel@redhat.com
2017-02-21 08:11:43 +01:00
Gerd Hoffmann
898248a329 xhci: drop ER_FULL_HACK workaround
The nec/renesas driver problems have finally been debugged and root
caused, see commit "7da76e1 xhci: fix event queue IRQ handling".

It's pretty clear now that
 (a) The whole "driver can't handle ring full" story is most likely
     wrong.
 (b) The ER_FULL_HACK workaround based on the false assumtion doesn't
     much.  It avoids the driver crashing (without commit 7da76e1), but
     it doesn't make usb work.
 (c) With 7da76e1 applied it doesn't trigger any more.

So, lets kill it.  Or, to be exact, lets almost kill it.  Some data
fields are kept unused in the state struct, for live migration backward
compatibility.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1486382139-30630-2-git-send-email-kraxel@redhat.com
2017-02-21 08:11:43 +01:00