The $pwd_is_source_path variable is never "y", since
configure re-executes itself from a build directory.
Remove code that will never run.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since there is not minimum version specified, and it's a test-only
dependency, it's fair to depend on a version that ships with a .pc I
suppose.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the variable to be more explicit. A further clean-up patch will
move the actual to dependency check to meson entirely.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On msys2, paths such as -L/e/path/to/qemu are not recognized by
the linker. Fortunately we do not need absolute paths at all in a
non-recursive build system.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In 19f27b6c24 TARGET_ABI_LONG was reduced to 32 bits for
CONFIG_USER_ONLY. There is no need to set this by hand; it will
now be set automatically by include/exec/user/abitypes.h.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If nettle is disabled and gcrypt enabled, the compiler and linker flags
needed for gcrypt are not passed.
Gnutls was also not added as a dependancy when gcrypt is enabled.
Attempting to add the library dependencies at the same time as the
source dependencies is error prone, as there are alot of different
rules for picking which sources to use, and some of the source files
use code level conditionals intead. It is thus clearer to add the
library dependencies separately.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200901133050.381844-2-berrange@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The whpx variable is currently initialized to "no" which causes the WHPX
check to skip the detection unless the user specified --enable-whpx.
Since the detection code should be able to figure it out correctly, let's
initialized the variable to "" on MinGW-builds for proper auto-detection
instead.
Message-Id: <20200804170055.2851-11-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20200823111757.72002-7-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix MK_ARRAY()
-----BEGIN PGP SIGNATURE-----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=Pr4V
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.2-pull-request' into staging
Add btrfs support
Fix MK_ARRAY()
# gpg: Signature made Thu 03 Sep 2020 00:26:37 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-5.2-pull-request:
linux-user: Add support for btrfs ioctls used to scrub a filesystem
linux-user: Add support for btrfs ioctls used to manage quota
linux-user: Add support for two btrfs ioctls used for subvolume
linux-user: Add support for a group of btrfs inode ioctls
linux-user: Add support for btrfs ioctls used to get/set features
linux-user: Add support for btrfs ioctls used to manipulate with devices
linux-user: Add support for a group of btrfs ioctls used for snapshots
linux-user: Add support for a group of btrfs ioctls used for subvolumes
linux-user: fix implicit conversion from enumeration type error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Meson needs the "system = xyz" line when cross-compiling. We are already
adding a "system = 'windows'" for the MinGW cross-compilation case here,
so let's add a "system = 'linux'" now for Linux hosts, too.
Message-Id: <20200823111757.72002-2-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In case the qemu-keymap tool generating them is neither installed on the
system nor built from sources (due to xkbcommon not being available)
qemu will not find the keymaps when started directly from the build
tree,
This happens because commit ddcf607fa3 ("meson: drop keymaps symlink")
removed the symlink to the source tree, and the special handling for
install doesn't help in case we do not install qemu.
Lets fix that by simply copying over the file from the source tree as
fallback.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200827102617.14448-1-kraxel@redhat.com>
[thuth: Rebased, changed "config_host['qemu_datadir']" to "qemu_datadir",
added Gerd's UNLINK fix to configure script]
Signed-off-by: Thomas Huth <thuth@redhat.com>
When using --enable-werror for the macOS builders in the Cirrus-CI,
the atomic64 test is currently failing, and config.log shows a bunch
of error messages like this:
config-temp/qemu-conf.c:6:7: error: implicit declaration of function
'__atomic_load_8' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
y = __atomic_load_8(&x, 0);
^
config-temp/qemu-conf.c:6:7: error: this function declaration is not a
prototype [-Werror,-Wstrict-prototypes]
Seems like these __atomic_*_8 functions are available in one of the
libraries there, so that the test links and passes there when not
using --enable-werror. But there does not seem to be a valid prototype
for them in any of the header files, so that the test fails when using
--enable-werror.
Fix it by using the "official" built-in functions instead (see e.g.
https://gcc.gnu.org/onlinedocs/gcc/_005f_005fatomic-Builtins.html).
We are not using the *_8 variants in QEMU anyway.
Suggested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200728074405.13118-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch implements functionality of following ioctls:
BTRFS_IOC_SUBVOL_CREATE - Creating a btrfs subvolume
Create a btrfs subvolume. The subvolume is created using the ioctl's
third argument which represents a pointer to a following structure
type:
struct btrfs_ioctl_vol_args {
__s64 fd;
char name[BTRFS_PATH_NAME_MAX + 1];
};
Before calling this ioctl, the fields of this structure should be filled
with aproppriate values. The fd field represents the file descriptor
value of the subvolume and the name field represents the subvolume
path.
BTRFS_IOC_SUBVOL_GETFLAGS - Getting subvolume flags
Read the flags of the btrfs subvolume. The flags are read using
the ioctl's third argument that is a pointer of __u64 (unsigned long).
The third argument represents a bit mask that can be composed of following
values:
BTRFS_SUBVOL_RDONLY (1ULL << 1)
BTRFS_SUBVOL_QGROUP_INHERIT (1ULL << 2)
BTRFS_DEVICE_SPEC_BY_ID (1ULL << 3)
BTRFS_SUBVOL_SPEC_BY_ID (1ULL << 4)
BTRFS_IOC_SUBVOL_SETFLAGS - Setting subvolume flags
Set the flags of the btrfs subvolume. The flags are set using the
ioctl's third argument that is a pointer of __u64 (unsigned long).
The third argument represents a bit mask that can be composed of same
values as in the case of previous ioctl (BTRFS_IOC_SUBVOL_GETFLAGS).
BTRFS_IOC_SUBVOL_GETINFO - Getting subvolume information
Read information about the subvolume. The subvolume information is
returned in the ioctl's third argument which represents a pointer to
a following structure type:
struct btrfs_ioctl_get_subvol_info_args {
/* Id of this subvolume */
__u64 treeid;
/* Name of this subvolume, used to get the real name at mount point */
char name[BTRFS_VOL_NAME_MAX + 1];
/*
* Id of the subvolume which contains this subvolume.
* Zero for top-level subvolume or a deleted subvolume.
*/
__u64 parent_id;
/*
* Inode number of the directory which contains this subvolume.
* Zero for top-level subvolume or a deleted subvolume
*/
__u64 dirid;
/* Latest transaction id of this subvolume */
__u64 generation;
/* Flags of this subvolume */
__u64 flags;
/* UUID of this subvolume */
__u8 uuid[BTRFS_UUID_SIZE];
/*
* UUID of the subvolume of which this subvolume is a snapshot.
* All zero for a non-snapshot subvolume.
*/
__u8 parent_uuid[BTRFS_UUID_SIZE];
/*
* UUID of the subvolume from which this subvolume was received.
* All zero for non-received subvolume.
*/
__u8 received_uuid[BTRFS_UUID_SIZE];
/* Transaction id indicating when change/create/send/receive happened */
__u64 ctransid;
__u64 otransid;
__u64 stransid;
__u64 rtransid;
/* Time corresponding to c/o/s/rtransid */
struct btrfs_ioctl_timespec ctime;
struct btrfs_ioctl_timespec otime;
struct btrfs_ioctl_timespec stime;
struct btrfs_ioctl_timespec rtime;
/* Must be zero */
__u64 reserved[8];
};
All of the fields of this structure are filled after the ioctl call.
Implementation notes:
Ioctls BTRFS_IOC_SUBVOL_CREATE and BTRFS_IOC_SUBVOL_GETINFO have structure
types as third arguments. That is the reason why a corresponding definition
are added in file 'linux-user/syscall_types.h'.
The line '#include <linux/btrfs.h>' is added in file 'linux-user/syscall.c' to
recognise preprocessor definitions for these ioctls. Since the file "linux/btrfs.h"
was added in the kernel version 3.9, it is enwrapped in an #ifdef statement
with parameter CONFIG_BTRFS which is defined in 'configure' if the
header file is present.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200823195014.116226-2-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Left out in commit 22a87800e6 ("configure: expand path variables for
meson configure", 2020-08-21), do it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_mandir is 'c:\Program
Files\QEMU', which is not recognized as being an absolute path, and
meson will end up adding the prefix again.
Use the pre-prefixed meson mandir option instead.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_docdir is 'c:\Program Files\QEMU\'
which is not recognized as being an absolute path, and meson will end up
adding the prefix again.
Add an option to pass docdir location to meson, pre-prefixed like we do
with other directories, build qemu_docdir with the common suffix and use
that instead of config_host['qemu_docdir'].
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following patches will make use of it to fix installation paths.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As documented in --help for --docdir.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Otherwise, we may accept very strange directory names...
While at it, quote the variables.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The value is used to construct conf/mod/data directories.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson includes the same logic that tries to look for -lz if
pkg-config (and cmake) cannot find zlib. The undocumented
--disable-zlib-test option becomes a no-op.
There is still an instance of "-lz" in the LIBS directory.
It will go away as soon as tests are converted to meson,
because the zlib dependency does not propagate from libblock.fa
to the Makefile-build unit tests.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This version includes an important bugfix to avoid including unnecessary
-Wl,-rpath flags. It also avoids the warnings on custom_targets with
more than one output.
Reported-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On Windows it is not possible to invoke a Python script as $NINJA.
If ninja is present use it directly, while if it is not we can
keep using ninjatool.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When pixman is not installed (or too old), but virglrenderer is available
and "configure" has been run with "--disable-system", the build currently
aborts when trying to compile vhost-user-gpu (since it requires pixman).
Let's skip the build of vhost-user-gpu when pixman is not installed or
too old. Instead of adding CONFIG_PIXMAN, it is simpler to move the
detection to pixman.
Based on a patch by Thomas Huth. <thuth@redhat.com>
Fixes: 9b52b17ba5 ("configure: Allow to build tools without pixman")
Reported-by: Rafael Kitover <rkitover@gmail.com>
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If Windows EXE files are built with -pie/-fpie they will fail to
launch. Historically QEMU defaulted to disabling PIE for Windows,
but this setting was accidentally lost when the configure summary
text was removed in
commit f933275789
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Mon Feb 3 13:28:38 2020 +0100
meson: move summary to meson.build
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: f933275789
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The daxctl library needs to be linked against when daxctl is asked for
in configure.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are building the keymaps by default now. Drop the keymaps symlink
so the generated files are actually written to the build tree not the
source tree.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-id: 20200824074057.3673-1-kraxel@redhat.com
Now we need to ship the OpenSBI fw_dynamic.elf image for the
RISC-V Spike machine, it requires us to create symbolic links
for pc-bios/*.elf files.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1596439832-29238-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If there are less than 2 arguments in version_ge(), the second
'shift' prints this error:
../configure: line 232: shift: shift count out of range
As Eric suggested, we can use 'shift ${2:+2}' which works out to
'shift 2' if $2 is set, or 'shift' (implicitly shift 1) if $2
is not set.
This patch replaces both 'shift; shift' occurrences in version_ge()
with 'shift ${2:+2}'.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200821203558.10338-1-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson warns if xgettext is not found. In the future we may want to add
a required argument to i18n.gettext(); in the meanwhile, I am adding a
--enable-gettext/--disable-gettext option and feature detection in
configure. This preserves QEMU's default behavior of detecting system
features, without any warning, if neither --enable-* nor --disable-*
is requested.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the create-config logic to meson.build; create a
configuration_data object and let meson handle the
quoting and output.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For now, sphinx is run on every invocation of make. The previous mechanism
using $(wildcard) is not reproducible in Meson and was also brittle; for
example some .rst.inc files were left out. The next patch will introduce
a Sphinx extension to emit a depfile.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The most interesting or most complicated part here is the syscall_nr.h
generators. In order to keep the generation logic all in meson.build,
I am adding to config_target the name of the .tbl file, and making the
generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl.
For architectures where the input file is not named syscall_nr.tbl,
syscall_nr.h has to be a source file; it's just a forwarder for x86
(i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The executable moves back from libexecdir to bindir, when it was
in 5.0 and earlier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Needed by linux-user/s390x/cpu_loop.c; this removes the only use of HOST_CC.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.
Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a. Because all of its users required gio
otherwise, the bug was hidden. Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not use cgcc; instead, extract compilation commands from compile_commands.json
and invoke sparse directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Meson build system is integrated in the existing configure/make steps
by invoking Meson from the configure script and converting Meson's build.ninja
rules to an included Makefile.
build.ninja already provides tags/ctags/cscope rules, so they are removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson requires the build dir to be separate from the source tree. Many
people are used to just running "./configure && make" though and the
meson conversion breaks that.
This introduces some backcompat support to make it appear as if an
"in source tree" build is being done, but with the results in the
"build/" directory. This allows "./configure && make" to work as it
did historically, albeit with the output binaries staying under build/.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split between CFLAGS/QEMU_CFLAGS and CXXFLAGS/QEMU_CXXFLAGS so that
we will use CFLAGS and CXXFLAGS for flags that we do not want to
pass to add_project_arguments.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures that Meson will be able to reuse the results of
the tests that are performed in the configure script.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to do it in the configure file if it is only used for a help message.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just make EFI_AARCH64 a variable in the makefile that defaults to the efi
firmware included with QEMU. It can be redefined on the "make" command
line.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If pixman is not installed, it is currently not possible to run:
.../configure --disable-system --enable-tools
Seems like there was a dependency from one of the required source
files to pixman in the past, but since commit 1ac0206b2a
("qemu-timer.c: Trim list of included headers"), this dependency
should be gone. Thus allow to compile the tools without pixman now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200723141123.14765-1-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We already have a nice --enable-sanitizers option to enable
AddressSanitizer. There is no reason to duplicate and force this
functionality in --enable-fuzzing. In the future, if more sanitizers are
added to --enable-sanitizers, it might be impossible to build with both
--enable-sanitizers and --enable-fuzzing, since not all sanitizers are
compatible with libFuzzer. In that case, we could enable ASAN with
--extra-cflags="-fsanitize=address"
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200706195534.14962-2-alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Added missing $CFLAGS]
Signed-off-by: Thomas Huth <thuth@redhat.com>
- file-posix: Fix read-only Linux block devices with auto-read-only
- Require aligned image size with O_DIRECT to avoid assertion failure
- Allow byte-aligned direct I/O on NFS instead of guessing 4k alignment
- Fix nbd_export_close_all() crash
- Fix race in iotests case 030
- qemu-img resize: Require --shrink for shrinking all image formats
- crypto: use a stronger private key for tests
- Remove VXHS block device
- MAINTAINERS: vvfat: set status to odd fixes
-----BEGIN PGP SIGNATURE-----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=ijIG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- file-posix: Fix read-only Linux block devices with auto-read-only
- Require aligned image size with O_DIRECT to avoid assertion failure
- Allow byte-aligned direct I/O on NFS instead of guessing 4k alignment
- Fix nbd_export_close_all() crash
- Fix race in iotests case 030
- qemu-img resize: Require --shrink for shrinking all image formats
- crypto: use a stronger private key for tests
- Remove VXHS block device
- MAINTAINERS: vvfat: set status to odd fixes
# gpg: Signature made Fri 17 Jul 2020 13:31:18 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
file-posix: Fix leaked fd in raw_open_common() error path
file-posix: Fix check_hdev_writable() with auto-read-only
file-posix: Move check_hdev_writable() up
file-posix: Allow byte-aligned O_DIRECT with NFS
block: Require aligned image size to avoid assertion failure
iotests: test shutdown when bitmap is exported through NBD
nbd: make nbd_export_close_all() synchronous
iotests/030: Reduce job speed to make race less likely
crypto: use a stronger private key for tests
qemu-img resize: Require --shrink for shrinking all image formats
Remove VXHS block device
vvfat: set status to odd fixes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The vxhs code doesn't compile since v2.12.0. There's no point in fixing
and then adding CI for a config that our users have demonstrated that
they do not use; better to just remove it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200711065926.2204721-1-marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The configure script currently refuses to succeed when run on macOS
with --enable-werror:
ERROR: configure test passed without -Werror but failed with -Werror.
The information in config.log indicates:
config-temp/qemu-conf.c:3:55: error: control reaches end of non-void
function [-Werror,-Wreturn-type]
static void *f(void *p) { pthread_setname_np("QEMU"); }
^
And indeed, the return statement is missing here.
Fixes: 479a57475e ("util: Implement debug-threads for macOS")
Message-Id: <20200716055655.24507-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Not all compilers support the -Wpsabi (clang-9 in my case). To handle
this gracefully we pare back the shared build machinery so the
Makefile is relatively "standalone". We still take advantage of
config-host.mak as configure has done a bunch of probing for us but
that is it.
Fixes: bac8d222a
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200713200415.26214-6-alex.bennee@linaro.org>
Regularize our handling of <sys/signal.h>: currently we include it in
osdep.h, but only for OpenBSD, and we include it without an ifdef
guard in a couple of C files. This causes problems for Haiku, which
doesn't have that header.
Instead, check in configure whether sys/signal.h exists, and if it
does then always include it from osdep.h.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-5-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_SYS_SIGNAL_H]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of assuming that all POSIX platforms provide mlockall(),
test for it in configure. If the host doesn't provide this platform
then os_mlock() will fail -ENOSYS, as it does already on Windows.
This is necessary for Haiku, which does not have mlockall().
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-4-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_MLOCKALL]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of using an OS-specific ifdef test to select the "openpty()
is in pty.h" codepath, make configure check for the existence of
the header and use the new CONFIG_PTY instead.
This is necessary to build on Haiku, which also provides openpty()
via pty.h.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-3-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_PTY_H]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tell Haiku to provide various BSD functions by setting BSD_SOURCE
and linking libbsd.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-2-peter.maydell@linaro.org
[PMM: expanded commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GCC supports "#pragma GCC diagnostic" since version 4.6, and
Clang seems to support it, too, since its early versions 3.x.
That means that our minimum required compiler versions all support
this pragma already and we can remove the test from configure and
all the related #ifdefs in the code.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200710045515.25986-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When configuring with --enable-fuzzing, we overwrote the CFLAGS
added by all the preceding checks. Instead of overwriting CFLAGS, append
the ones we need.
Fixes: adc28027ff ("fuzz: add configure flag --enable-fuzzing")
Reported-by: Li Qiang <liq3ea@163.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200708200104.21978-2-alxndr@bu.edu>
Tested-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl8J0yoACgkQ+9DbCVqe
KkSzTAf/Vn+9TU8Qt7nZvl7W4tz7Sy5K8EJGwj2RXx6CWWWLiFbsXurIM8Krw5Vc
RmvUxwa359b+J0lQpfeNDHYm1nM8RZLFlkG0a5bl0I8sW0EcPjBRtwNaGKXh2p0u
u2RS2QAi6A9AvYT4ZREYlBM+o9WzbxCEQm4s8fr6WEJCQfxBnb5/bGiEjWR64e8C
j9Kvou+zAKfVizbQMtu+mwqjsoPtcS1b3vVcO7anhNuUsuaEKkS0dFWzWvw3lwJR
STIYnb8Y/eJ1yKr0hPH2qtWv3n6yhlYvYmpUCH6AwshGMUoeFEzR2VoWS6yZPGG6
na6XA3UW5R9AxIDfkCJ5ueeo8t9xMQ==
=HRWa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-110720-2' into staging
Testing and misc build updates:
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
# gpg: Signature made Sat 11 Jul 2020 15:56:42 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-110720-2: (50 commits)
iotests: Set LC_ALL=C for sort
Revert "vga: build virtio-gpu as module"
tests: fix "make check-qtest" for modular builds
.cirrus.yml: add bash to the brew packages
tests/docker: update toolchain set in debian-xtensa-cross
tests/docker: fall back more gracefully when pull fails
docs: Add to gdbstub documentation the PhyMemMode
docs/devel: add some notes on tcg-icount for developers
docs/devel: convert and update MTTCG design document
tests/qht-bench: Adjust threshold computation
tests/qht-bench: Adjust testing rate by -1
travis.yml: Test also the other targets on s390x
shippable: pull images from registry instead of building
testing: add check-build target
containers.yml: build with docker.py tooling
gitlab: limit re-builds of the containers
tests: improve performance of device-introspect-test
gitlab: add avocado asset caching
gitlab: enable check-tcg for linux-user tests
linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ubuntu.aarch64 provides a script to create an Ubuntu 18.04 VM.
Another new file is also added aarch64vm.py, which is a module with
common methods used by aarch64 VMs, such as how to create the
flash images.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-6-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-10-alex.bennee@linaro.org>
Changes to tests/vm/basevm.py to allow accepting a configuration file
as a parameter. Allows for specifying VM options such as
cpu, machine, memory, and arbitrary qemu arguments for specifying options
such as NUMA configuration.
Also added an example conf_example_aarch64.yml and conf_example_x86.yml.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-4-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-8-alex.bennee@linaro.org>
The configure test for 'secret_keyring' incorrectly checked the
'have_keyring' variable.
Fixes: 54e7aac056
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200618092636.71832-1-david.edmondson@oracle.com>
Message-Id: <20200701135652.1366-4-alex.bennee@linaro.org>
Add AVR related definitions into QEMU, make AVR support buildable.
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-23-huth@tuxfamily.org>
[PMD: Fixed @avr tag in qapi/machine.json]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently we have 2 types of vhost backends in QEMU: vhost kernel and
vhost-user. The above patch provides a generic device for vDPA purpose,
this vDPA device exposes to user space a non-vendor-specific configuration
interface for setting up a vhost HW accelerator, this patch set introduces
a third vhost backend called vhost-vdpa based on the vDPA interface.
Vhost-vdpa usage:
qemu-system-x86_64 -cpu host -enable-kvm \
......
-netdev type=vhost-vdpa,vhostdev=/dev/vhost-vdpa-id,id=vhost-vdpa0 \
-device virtio-net-pci,netdev=vhost-vdpa0,page-per-vq=on \
Signed-off-by: Lingshan zhu <lingshan.zhu@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Cindy Lu <lulu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200701145538.22333-14-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Recent versions of Solaris (v11.4) now feature an openpty() function,
too, causing a build failure since we ship our own implementation of
openpty() for Solaris in util/qemu-openpty.c so far. Since there are
now both variants available in the wild, with and without this function
(and illumos is said to not have this function yet), let's introduce a
proper HAVE_OPENPTY define for this to fix the build failure.
Message-Id: <20200702143955.678-1-thuth@redhat.com>
Tested-by: Michele Denber <denber@mindspring.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 91b8eba9ec ("vgabios: remove submodule and build rules.")
removed the vgabios submodule, but left some traces in the configure
script. Remove them.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200622131240.9624-1-kraxel@redhat.com
Add a pair of configure options --{enable,disable}-libdaxctl to control
whether QEMU is compiled with libdaxctl [1]. Libdaxctl is a utility
library for managing the device dax subsystem.
QEMU uses mmap(2) to maps vNVDIMM backends and aligns the mapping
address to the page size (getpagesize(2)) by default. However, some
types of backends may require an alignment different than the page
size. The 'align' option is provided to memory-backend-file to allow
users to specify the proper alignment.
For device dax (e.g., /dev/dax0.0), the 'align' option needs to match
the alignment requirement of the device dax, which can be fetched
through the APIs of libdaxctl version 57 or up.
[1] Libdaxctl is a part of ndctl project.
The project's repository is: https://github.com/pmem/ndctl
For more information about libdaxctl APIs, you can refer to the
comments in source code of: pmem/ndctl/daxctl/lib/libdaxctl.c.
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20200429085011.63752-4-jingqi.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a flag to enable/disable the SafeStack instrumentation
provided by LLVM.
On enable, make sure that the compiler supports the flags, and that we
are using the proper coroutine implementation (coroutine-ucontext).
On disable, explicitly disable the option if it was enabled by default.
While SafeStack is supported only on Linux, NetBSD, FreeBSD and macOS,
we are not checking for the O.S. since this is already done by LLVM.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-id: 20200529205122.714-4-dbuono@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On aarch64, gcc 9.3 is generating
qemu/exec.c: In function ‘address_space_translate_iommu’:
qemu/exec.c:431:28: note: parameter passing for argument of type \
‘MemTxAttrs’ {aka ‘struct MemTxAttrs’} changed in GCC 9.1
and many other repetitions. This structure, and the functions
amongst which it is passed, are not part of a QEMU public API.
Therefore we do not care how the compiler passes the argument,
so long as the compiler is self-consistent.
The only portion of QEMU which does have a public api, and so
must have a stable abi, is "qemu/plugin.h". We test this by
forcing -Wpsabi in tests/plugin/Makefile.
Buglink: https://bugs.launchpad.net/qemu/+bug/1881552
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200617201309.1640952-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clang 10 enables this by default with -Wtype-limit.
All of the instances flagged by this Werror so far have been
cases in which we really do want the compiler to optimize away
the test completely. Disabling the warning will avoid having
to add ifdefs to work around this.
Cc: Eric Blake <eblake@redhat.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1878628
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200617201309.1640952-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use a helper function to tidy the assembly of gcc_flags.
Separate flags that disable warnings from those that enable,
and sort the disable warnings to the end.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200617201309.1640952-4-richard.henderson@linaro.org
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We tried running QEMU under tsan in 2016, but tsan's lack of support for
longjmp-based fibers was a blocker:
https://groups.google.com/forum/#!topic/thread-sanitizer/se0YuzfWazw
Fortunately, thread sanitizer gained fiber support in early 2019:
https://reviews.llvm.org/D54889
This patch brings tsan support upstream by importing the patch that annotated
QEMU's coroutines as tsan fibers in Android's QEMU fork:
https://android-review.googlesource.com/c/platform/external/qemu/+/844675
Tested with '--enable-tsan --cc=clang-9 --cxx=clang++-9 --disable-werror'
configure flags.
Signed-off-by: Lingfeng Yang <lfy@google.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[cota: minor modifications + configure changes]
Signed-off-by: Robert Foley <robert.foley@linaro.org>
[RF: configure changes, coroutine fix + minor modifications]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-2-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-5-alex.bennee@linaro.org>
dtc submodule update, now call the libfdt target from the new
dtc Makefile, which has been changed to not require bison, flex, etc.
This removes warnings during the build.
scripts/ symlink and tests directory creation are not necessary,
and neither is calling the clean rule explicitly.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200518160319.18861-2-cfontana@suse.de>
Message-Id: <20200612190237.30436-3-alex.bennee@linaro.org>
The git-submodule.sh script is called by make and initialize the
submodules listed in the GIT_SUBMODULES variable generated by
./configure.
SLOF is required for building the s390-ccw firmware on s390x, since
it is using the libnet code from SLOF for network booting.
Add it to the GIT_SUBMODULES when building the s390-ccw firmware.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200615074919.12552-1-f4bug@amsat.org>
[thuth: Tweaked the commit message a little bit]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add tests:
test_secret_keyring_good;
test_secret_keyring_revoked_key;
test_secret_keyring_expired_key;
test_secret_keyring_bad_serial_key;
test_secret_keyring_bad_key_access_right;
Added tests require libkeyutils. The absence of this library is not
critical, because these tests will be skipped in this case.
Signed-off-by: Alexey Krasikov <alex-krasikov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the ability for the secret object to obtain secret data from the
Linux in-kernel key managment and retention facility, as an extra option
to the existing ones: reading from a file or passing directly as a
string.
The secret is identified by the key serial number. The upper layers
need to instantiate the key and make sure the QEMU process has access
permissions to read it.
Signed-off-by: Alexey Krasikov <alex-krasikov@yandex-team.ru>
- Fixed up detection logic default behaviour in configure
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In case of not using random-number needing feature, it makes sense to
skip RNG init too. This is especially helpful when QEMU is sandboxed in
Stubdomain under Xen, where there is very little entropy so initial
getrandom() call delays the startup several seconds. In that setup, no
random bytes are needed at all.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch introduces a vhost-user device for vsock, using the
vhost-vsock-common parent class.
The vhost-user-vsock device can be used to implement the virtio-vsock
device emulation in user-space.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200522122512.87413-3-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not checking the value of malloc will cause a warning with GCC 10.1,
which may result in configuration failure, with the following line in
config.log:
config-temp/qemu-conf.c:2:18: error: ignoring return value of ‘malloc’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
2 | int main(void) { malloc(1); return 0; }
| ^~~~~~~~~
Signed-off-by: Leonid Bloch <lb.workbox@gmail.com>
Message-Id: <20200524221204.9791-1-lb.workbox@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid building TCG when building only tools:
./configure --enable-tools --disable-system --disable-user
This saves us from running the soft-float tests enabled since
commit 7617010250.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Preparing for Loongson-3 virtualization, add KVM target support for
MIPS64 in configure script.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1588501221-1205-2-git-send-email-chenhc@lemote.com>
Not all distros ship genisoimage which is a Debian fork from the
original cdrtools. As the options are pretty much the same support it
as a fallback binary.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200519132259.405-2-robert.foley@linaro.org>
This commit adds a new audiodev backend to allow QEMU to use JACK as
both an audio sink and source.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20200512101603.E3DB73A038E@moya.office.hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Based on a mail on the qemu-devel mailing list at
https://lists.nongnu.org/archive/html/qemu-devel/2020-05/msg02909.html
and some internet research the GTK3 versions on supported
platforms are:
RHEL-7.4: 3.22.10
RHEL-7.5: 3.22.26
Debian (Stretch): 3.22.11
Debian (Buster): 3.24.5
OpenBSD (Ports): 3.22.30
FreeBSD (Ports): 3.22.29
OpenSUSE Leap 15: 3.22.30
SLE12-SP2: Unknown
SLE15: 3.22.30
Ubuntu (Bionic): 3.22.30
Ubuntu (Focal): 3.24.18
macOS (Homebrew): 3.22.30
This justifies increasing the minimum required GTK version in
QEMU to 3.22.0.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-11-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GDB's remote protocol requires M-profile cores to use the feature
name 'org.gnu.gdb.arm.m-profile' instead of the 'org.gnu.gdb.arm.core'
feature used for A- and R-profile cores. We weren't doing this, which
meant GDB treated our M-profile cores like A-profile ones. This mostly
doesn't matter, but for instance means that it doesn't correctly
handle backtraces where an M-profile exception frame is involved.
Ship a copy of GDB's arm-m-profile.xml and use it on the M-profile
cores. The integer registers have the same offsets as the
arm-core.xml, but register 25 is the M-profile XPSR rather than the
A-profile CPSR, so we need to update arm_cpu_gdb_read_register() and
arm_cpu_gdb_write_register() to handle XSPR reads and writes.
Fixes: https://bugs.launchpad.net/qemu/+bug/1877136
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200507134755.13997-1-peter.maydell@linaro.org
zstd significantly reduces cluster compression time.
It provides better compression performance maintaining
the same level of the compression ratio in comparison with
zlib, which, at the moment, is the only compression
method available.
The performance test results:
Test compresses and decompresses qemu qcow2 image with just
installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2G
The test was conducted with brd disk to reduce the influence
of disk subsystem to the test results.
The results is given in seconds.
compress cmd:
time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
src.img [zlib|zstd]_compressed.img
decompress cmd
time ./qemu-img convert -O qcow2
[zlib|zstd]_compressed.img uncompressed.img
compression decompression
zlib zstd zlib zstd
------------------------------------------------------------
real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %)
user 65.0 15.8 5.3 2.5
sys 3.3 0.2 2.0 2.0
Both ZLIB and ZSTD gave the same compression ratio: 1.57
compressed image size in both cases: 1.4G
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-4-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently "cf-core.xml" is sent to GDB when using any m68k flavor. Thing is
it uses the "org.gnu.gdb.coldfire.core" feature name and gdb 8.3 then expects
a coldfire FPU instead of the default m68881 FPU.
This is not OK because the m68881 floats registers are 96 bits wide so it
crashes GDB with the following error message:
(gdb) target remote localhost:7960
Remote debugging using localhost:7960
warning: Register "fp0" has an unsupported size (96 bits)
warning: Register "fp1" has an unsupported size (96 bits)
...
Remote 'g' packet reply is too long (expected 148 bytes, got 180 bytes): \
00000000000[...]0000
With this patch: qemu-system-m68k -M none -cpu m68020 -s -S
(gdb) tar rem :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
0x00000000 in ?? ()
(gdb) p $fp0
$1 = nan(0xffffffffffffffff)
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1588094279-17913-3-git-send-email-frederic.konrad@adacore.com>
Message-Id: <20200430190122.4592-10-alex.bennee@linaro.org>
As gdb will generally be talking to "foreign" guests lets use that if
we can. Otherwise the chances of gdb barfing are considerably higher.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200430190122.4592-2-alex.bennee@linaro.org>
It seems on some compilers the test can pass but still give you
broken binaries.
Fixes: d2cd29e307
Fixes: https://bugs.launchpad.net/qemu/+bug/1871798
Cc: Bug 1871798 <1871798@bugs.launchpad.net>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Tested-by: James Le Cuirot <chewi@aura-online.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-9-alex.bennee@linaro.org>
Otherwise it's hard to debug whats going on.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-8-alex.bennee@linaro.org>
If we are not making warnings fatal for compilation, make them
non-fatal when building the Sphinx documentation also. (For instance
Sphinx 3.0 warns about some constructs that older versions were happy
with, which is a build failure if we use the warnings-as-errors
flag.)
This provides a workaround at least for LP:1872113.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200411182934.28678-2-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Without -Werror, the probe may succeed, but then compilation fails
later when -Werror is added for other reasons. Shows up on windows,
where the compiler complains about -fPIC.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200401214756.6559-1-richard.henderson@linaro.org>
Message-Id: <20200403191150.863-13-alex.bennee@linaro.org>
Recent toolchains support static and pie at the same time.
As with normal dynamic builds, allow --static to default to PIE
if supported by the toolchain. Allow --enable/--disable-pie to
override the default.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Fix --disable-pie --static
v3: Update for QEMU_LDFLAGS.
Some distributions, e.g. Ubuntu 19.10, enable PIE by default.
If for some reason one wishes to build a non-pie binary, we
must provide additional options to override.
At the same time, reorg the code to an elif chain.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Update for QEMU_LDFLAGS.
There is nothing about these options that is related to PIE.
Use them unconditionally.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fangrui Song <i@maskray.me>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Do not split into two tests.
v3: Update to QEMU_LDFLAGS.
The CFLAGS_NOPIE and LDFLAGS_NOPIE variables are used
in pc-bios/optionrom/Makefile, which has nothing to do
with the PIE setting of the main qemu executables.
This overrides any operating system default to build
all executables as PIE, which is important for ROMs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PIE is supported on many other hosts besides x86.
The default for non-x86 is now the same as x86: pie is used
if supported, and may be forced via --enable/--disable-pie.
The original commit (40d6444e91) said:
"Non-x86 are not changed, as they require TCG changes"
but I think that's wrong -- there's nothing about PIE that
affects TCG one way or another.
Tested on aarch64 (bionic) and ppc64le (centos 7) hosts.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This adjustment was random and unnecessary. The user mode
startup code in probe_guest_base() will choose a value for
guest_base that allows the host qemu binary to not conflict
with the guest binary.
With modern distributions, this isn't even used, as the default
is PIE, which does the same job in a more portable way.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Remove mention of config-host.ld from make distclean
While debugging check-acceptance failures I found an instability in
the mips64el test case. Briefly the test case:
retry.py -n 100 -c -- ./mips64el-softmmu/qemu-system-mips64el \
-display none -vga none -serial mon:stdio \
-machine malta -kernel ./vmlinux-4.7.0-rc1.I6400 \
-cpu I6400 -smp 8 -vga std \
-append "printk.time=0 clocksource=GIC console=tty0 console=ttyS0 panic=-1" \
--no-reboot
Reports about a 9% failure rate:
Results summary:
0: 91 times (91.00%), avg time 5.547 (0.45 varience/0.67 deviation)
-6: 9 times (9.00%), avg time 3.394 (0.02 varience/0.13 deviation)
Ran command 100 times, 91 passes
When re-run with "--accel tcg,thread=single" the instability goes
away.
Results summary:
0: 100 times (100.00%), avg time 17.318 (249.76 varience/15.80 deviation)
Ran command 100 times, 100 passes
Which seems to indicate there is some aspect of the MIPS MTTCG fixes
that has been missed. Ideally we would fix that but I'm afraid I don't
have time to investigate and am not super familiar with the
architecture anyway. In lieu of someone tracking down the failure lets
disable it for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Message-Id: <20200323161514.23952-7-alex.bennee@linaro.org>
This patch fixes two problems:
- it cleanups linux-user variants (for instance ppc64-linux-user
and ppc64le-linux-user)
- it removes the .o file when it removes the .d file, otherwise the .o
file is never updated
Fixes: 5f29856b85 ("linux-user, configure: improve syscall_nr.h dependencies checking")
Fixes: 4d6a835dea ("linux-user: introduce parameters to generate syscall_nr.h")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200325075757.1959961-1-laurent@vivier.eu>
This is mostly a fix for in-tree build.
It removes errors on .d directories:
grep: ./.gitlab-ci.d: Is a directory
grep: ./scripts/qemu-guest-agent/fsfreeze-hook.d: Is a directory
and improves performance by only checking <ARCH>-linux-user directories.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200323114116.163609-1-laurent@vivier.eu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Copy syscall_n32.tbl, syscall_n64.tbl and syscallhdr.sh from
linux/arch/parisc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Move the offsets (6000 for n32 and 5000 for n64) from the file to
the Makefile.objs to be passed to syscallhdr.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-18-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
