g_ptr_array_new_with_free_func is there since glib 2.22,
use the older g_ptr_array_foreach instead.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace string "slot" in acpi_memory_plug_cb() with macro PC_DIMM_SLOT_PROP.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP
commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make
variable, not as preprocessor macro, killing the code conditional on
defined(CONFIG_PCI_HOTPLUG_OLD).
In all this time, nobody reported the loss. I only noticed it when I
tried to test some error reporting change that forced me to touch this
old crap again.
Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward
compatibility god has been strong enough to sacrifice at its altar
about a dozen times, but not strong enough to even once verify the
legacy feature's still there, let alone works.
Remove the commands along with the code backing them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
None of them should be used in new code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
build_*() routines were used for composing AML
structures manually in acpi-build.c but after
conversion to AML API they are not used outside
of aml-build.c anymore, so hide them from external
users.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace AML template patching with direct composing
of PCI device entries in C. It allows to simplify
PCI tree generation further and saves us about 400LOC
scattered through different files, confining tree
generation to one C function which is much easier
to deal with.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it basicaly does the same as original approach,
* just without bus/notify tables tracking (less obscure)
which is easier to follow.
* drops unnecessary loops and bitmaps,
creating devices and notification method in the same loop.
* saves us ~100LOC
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
patch moves SMC device into SSDT and creates it only
when device is present, which makes ACPI tables smaller
in default case when device is not present.
Also it fixes wrong IO range in CRS if "iobase"
property is set to a non default value.
PS:
Testing with XP shows that current default "iobase"
used SMC device conflicts with floppy controller IO,
but it's topic for another patch and I'd leave it
to SMC device author for resolving conflict.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
CC: agraf@suse.de
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IO port and length will be used in following patch
to correctly generate SMC ACPI device in SSDT.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It drops empty ssdt_misc templete. It also hides
from user almost all pointer arithmetic when building
SSDT which makes resulting code a bit cleaner
and concentrating only on composing ASL construct
/i.e. a task build_ssdt() should be doing/.
Also it makes one binary blob less stored in QEMU
source tree by removing need to keep and update
hw/i386/ssdt-misc.hex.generated file here in total
saving us ~430LOC.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drops manual hole punching in PCI0._CRS on PIIX4 machine type
for GPE0 resources. Resources will be consumed by Device(GPE0)
that is attached to PCI namespace.
There is GPE device with HID ACPI0006 since ACPI2.0
that should be used for this purpose but none of Windows
versions support it and show it as "unknown device",
so reserve resource in old fashioned way with PNP0A06
device to make windows happy and actually reserve resources.
Along with last hole _CRS layout of PIIX4 machine becomes
the same as Q35 one, so merge them together and use the same
_CRS for both machine types.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drops manual hole punching in PCI0._CRS on PIIX4 machine type
for CPU hotplug resources.
Resources will be consumed by Device(PRES) that is attached
to PCI bus. The same way how it currently works for mem hotlpug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drops manual hole punching in PCI0._CRS for PIIX4 machine type.
Resources will be consumed by Device(PHPR) that cwis attached
to PCI bus. The same way how it currently works for mem hotlpug.
Manual hole in PIIX4 _CRS wasn't correct anyway since it was
legacy size 0xF while current PCIHP MMIO region is of size 0x14.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace template patching and runtime calculation
in _CRS() method with static _CRS defined in SSDT.
No functional change except of as mentined above
and _CRS being moved from DSDT to SSDT.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide the TIS 1.3 capability flags.
The interface now looks like a TIS 1.3 interface. It's fully
compatible with previous TIS 1.2 and drivers written for
TIS 1.2 continue to work.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend the backend to check whether the TPM_ContinueSelfTest
finished successfully and provide a flag to the TIS front-end
if it successfully finished. The TIS then sets a flag in
all localities in the STS register and keeps it until the next
reset.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support for the XFIFO register (range) of the TIS 1.3 specification.
We support a range of 64 bytes.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Improve the access to the registers with 32 and 16 bit reads and writes.
Also enable access to a non-base register address, such as reads of the
2nd byte of a register. Map the FIFO byte access to any byte within
its 4 byte register (following specs).
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
More recent TIS specs extend the STS register to 32 bit. While
we don't store the TIS interface state, yet, we can extend it
without sideeffects.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The idea is that all other virtio devices are calling this helper
to merge properties of the proxy device. This is the only difference
in between this helper and code in inside virtio_instance_init_common.
The patch should not cause any harm as property list in generic balloon
code is empty.
This also allows to avoid some dummy errors like fixed by this
commit 91ba212088
Author: Gonglei <arei.gonglei@huawei.com>
Date: Tue Sep 30 14:10:35 2014 +0800
virtio-balloon: fix virtio-balloon child refcount in transports
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Raushaniya Maksudova <rmaksudova@parallels.com>
Revieved-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will be used later to dynamically reserve MMIO region
instead of manually punching holes in PCI0._CRS
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces a static complied in DSDT MMIO region
for memory hotplug with one created at runtime
leaving only truly static memory hotplug related
ASL bits in DSDT. And replaces template patching
of MEMORY_SLOTS_NUMBER value with ASL API created
named value.
Later it also would make easier to reuse current
ACPI memory hotplug on other targets.
Also later it would be possible to move remaining
memory hotplug ASL methods into build_ssdt() and
add all memory hotplug related AML into SSDT only
when memory hotplug is enabled, further reducing
ACPI tables blob if memory hotplug isn't used.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
in addition it saves us ~330LOC and makes it one binary blob less
stored in QEMU source tree by removing need to keep and update
hw/i386/ssdt-mem.hex.generated file there.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces a static complied in DSDT MMIO region
for CPU hotplug with one created at runtime
leaving only truly static CPU hotplug related ASL
bits in DSDT.
It also puts CPU_HOTPLUG_RESOURCE_DEVICE into
PCI0 scope and reserves resources from it,
preparing for dropping manual hole punching
in PCI0._CRS.
Later it also would make easier to reuse current
ACPI CPU hotplug on other targets.
Also later it would be possible to move remaining
CPU hotplug ASL methods into build_ssdt() and
add all CPU hotplug related AML into SSDT only
when CPU hotplug is enabled, further reducing
ACPI tables blob if CPU hotplug isn't used.
impl. detail:
Windows XP can't handle /BSODs/ OperationRegion
declaration in DSDT when variable from SSDT is used
for specifying its address/length and also when
Field declared in DSDT with OperationRegion from
SSDT if DSDT is being parsed before SSDT.
But it works just fine when referencing named
fields from another table. Hence OperationRegion
and Field declaration are moved to SSDT to make
XP based editions work.
PS:
Later Windows editions seem to be fine with above
conditions.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
in addition it saves us ~400LOC and makes it
one binary blob less stored in QEMU source
tree by removing need to keep and update
hw/i386/ssdt-proc.hex.generated file there.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drops AML template patching and allows to
save some space in SSDT if pvpanic device doesn't
exist by not including disabled device description
into SSDT. It also makes device description
smaller by replacing _STA method with named value
and dropping _INI method.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Named/Reserved{Field} definition uses PkgLength [1] encoding to specify
field length, however it doesn't include size of PkgLength field itself,
while other block objects that have explicit length of its body account
for PkgLength size while encoding it [2].
This special casing isn't mentioned in ACPI spec, but that's what 'iasl'
compiles NamedField to so add extra argument to build_prepend_pkg_length()
to allow it handle the case.
--
1. ACPI Spec 5.0, 20.2.5.2 Named Objects Encoding, page 822
2. ACPI Spec 5.0, 5.4 Definition Block Encoding
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replaces template patching with packages composed
using AML API.
Note on behavior change:
If S3 or S4 is disabled, respective packages won't
be created and put into SSDT. Which saves us some
space in SSDT and doesn't confuse guest OS with
mangled package names as it was done originally.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
