Support disas for Zcmt* instructions only when related extensions
are supported.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Pass RISCVCPUConfig as disassemble_info.target_info to support disas
of conflict instructions related to specific extensions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use target_words_bigendian() instead of an ifdef.
Remove CONFIG_RISCV_DIS from the check for riscv as a host; this is
a poisoned identifier, and anyway will always be set by meson.build
when building on a riscv host.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230508133745.109463-3-thuth@redhat.com>
[rth: Type change done in a separate patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We'd like to move disas.c into the common code source set, where
CONFIG_USER_ONLY is not available anymore. So we have to move
the related code into a separate file instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230508133745.109463-2-thuth@redhat.com>
[rth: Type change done in a separate patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-83-richard.henderson@linaro.org>
Use uint64_t for the pc, and size_t for the size.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-81-richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-80-richard.henderson@linaro.org>
Zcmp/Zcmt instructions will override disasm for c.fld*/c.fsd*
instructions currently.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230307081403.61950-10-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix incorrect register name in RISC-V disassembler for fmv,fabs,fneg instructions
Signed-off-by: Mikhail Tyutin <m.tyutin@yadro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <3454991f-7f64-24c3-9a36-f5fa2cc389e1@yadro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The decoding of the slli_uw currently contains decoding
error: shamt part of opcode has six bits, not five.
Fixes 3de1fb71("target/riscv: update disas.c for xnor/orn/andn and slli.uw")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230227090228.17117-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Due to typo in opcode list, ctzw is disassembled as clzw instruction.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Fixes: 02c1b569a1 ("disas/riscv: Add Zb[abcs] instructions")
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230217151459.54649-1-ivan.klokov@syntacore.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The decoding of the following instructions from Zb[abcs] currently
contains decoding/printing errors:
* xnor,orn,andn: the rs2 operand is not being printed
* slli.uw: decodes and prints the immediate shift-amount as a
register (e.g. 'shift-by-2' becomes 'sp') instead of
interpreting this as an immediate
This commit updates the instruction descriptions to use the
appropriate decoding/printing formats.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230120151551.1022761-1-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since the nanomips disassembler is not C++ code anymore, it need not
depend on link_language == cpp. Always include it and remove the
CONFIG_NANOMIPS_DIS symbol.
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230110084942.299460-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There is no point in looking for a 48-bit opcode if we've
not read the second word for a 32-bit opcode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221106023735.5277-5-richard.henderson@linaro.org>
Split out a helper function for reading a uint16_t
with the correct endianness.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221106023735.5277-4-richard.henderson@linaro.org>
Since Disassemble wants the data in this format, collect
it that way. This allows using a loop to print the bytes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221106212852.152384-3-richard.henderson@linaro.org>
Reduce the number of local variables within the scope of the
setjmp by moving it to the existing helper. The actual length
returned from Disassemble is not used, because we have already
determined the length while reading bytes. Fixes:
nanomips.c: In function ‘print_insn_nanomips’:
nanomips.c:21925:14: error: variable ‘insn1’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
nanomips.c:21925:25: error: variable ‘insn2’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
nanomips.c:21925:36: error: variable ‘insn3’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
nanomips.c:21926:22: error: variable ‘buf’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221106212852.152384-2-richard.henderson@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-5-philmd@linaro.org>
Suggested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-4-philmd@linaro.org>
Fix:
disas/nanomips.c:12231:62: warning: format specifies type 'char *' but the argument has type 'uint64' (aka 'unsigned long long') [-Wformat]
return img_format("RESTOREF 0x%" PRIx64 ", %s", u_value, count_value);
~~ ^~~~~~~~~~~
%llu
Fixes: 4066c152b3 ("disas/nanomips: Remove IMMEDIATE functions")
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-3-philmd@linaro.org>
disas/mips.c got added in commit 6643d27ea0 ("MIPS disas support")
apparently based on binutils tag 'gdb_6_1-branchpoint' [1].
Back then, MIPSr6 was not supported (added in binutils commit
7361da2c952 during 2014 [2]).
Binutils codebase diverged so much over the last 18 years, it is
not possible to simply cherry-pick their changes, so fix it BEQZC /
BNEZC 21-bit signed branch displacement locally.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=opcodes/mips-dis.c;hb=refs/tags/gdb_6_1-branchpoint
[2] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=7361da2c952
Fixes: 31837be3ee ("target-mips: add compact and CP1 branches")
Signed-off-by: David Daney <david.daney@fungible.com>
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
[PMD: Added commit description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221014112322.61119-1-philmd@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now that everything has been converted to C code the nanomips.cpp file
has been renamed. Therefore, meson.build file is also changed.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-25-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Replaced argument passing by reference with passing by address.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-24-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since there's no support for exception handling in C, the try-catch
blocks have been deleted, and throw clauses are replaced. When a runtime
error happens, we're printing out the error message. Disassembling of
the current instruction interrupts. This behavior is achieved by adding
sigsetjmp() to discard further disassembling after the error message
prints and by adding the siglongjmp() function to imitate throwing an
error. The goal was to maintain the same output as it was.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-22-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This patch expands the Dis_info struct, which should hold the
necessary data for handling runtime errors. Fields fprintf_func and
stream are in charge of error printing. Field buf enables the use of
sigsetjmp() and siglongjmp() functions. Support for runtime error
handling will be added later.
We're filling Dis_info at the entrance of the nanoMIPS disassembler,
i.e. print_insn_nanomips. Next, we're adding that information as an
argument wherever we need to.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-21-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Disassemble function that calls the other variant of it is deleted.
Where it is called, now we're directly calling the other implementation.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-20-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
g_autofree attribute is added for every dynamically allocated string to
prevent memory leaking.
The implementation of the several functions that work with dynamically
allocated strings is slightly changed so we can add those attributes.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-19-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CPR functions has been removed.
Before this patch, we'd been calling img_format twice, the first time
through the CPR function to get an appropriate string and the second
time to print that formatted string. There's no more need for that.
Therefore, calls to CPR are removed, and now we're directly printing
"CP" and integer value instead.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-18-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Both versions of IMMEDIATE functions have been removed.
Before this patch, we'd been calling img_format twice, the first time
through the IMMEDIATE to get an appropriate string and the second time
to print that string. There's no more need for that. Therefore, calls to
IMMEDIATE are removed, and now we're directly printing the integer
values instead.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-17-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The return type of typedef disassembly_function is changed to char *
instead of std::string. Therefore, for every particular
disassembly_function function signature is changed.
For example:
- static std::string ABS_D(uint64 instruction, img_address m_pc) {...}
is replaced with
- static char *ABS_D(uint64 instruction, img_address m_pc) {...}
Every helper function used to return std::string is changed to return
const char * or char *. Where the return value points to a static string
that the caller must not free, the return type is const char *. If a
function allocates memory and the caller is required to free it, the
return type is a char *. This applies to the following functions:
img_format, to_string, GPR, save_restore_list, FPR, etc.
Now that we replaced every std::string for const char * or char *, it is
possible to delete multiple versions of the img_format function. The
general version:
- static char *img_format(const char *format, ...) {...}
can handle all string formatting, so others have been deleted.
Where necessary, strings are dynamically allocated with g_strjoinv,
g_strdup, g_strdup_vprintf, and g_strdup_printf. Memory leaking will be
prevented later.
String concatenation in the save_restore_list() function is handled
using g_strjoinv() function instead of += operator.
The type of the "dis" parameter in the Disassemble function is changed
- from std::string &
- to char **
Without applying all of these changes, the nanomips disassembler may be
buildable but can't produce the appropriate output, so all of them are
made together.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-16-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Following functions just wrap the decode_gpr_gpr3() function:
- encode_rs3_and_check_rs3_ge_rt3()
- encode_rs3_and_check_rs3_lt_rt3()
Therefore those have been deleted. Calls to these two functions have
been replaced with calls to decode_gpr_gpr3.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-15-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Functions that have just one parameter and simply return it have been
deleted. Calls to these functions have been replaced with the argument
itself.
We're deleting following functions:
- both versions of copy()
- encode_s_from_address()
- encode_u_from_address()
- encode_lsb_from_pos_and_size()
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-14-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
<sstream> is a C++ library and it's not used by disassembler.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-13-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Header file nanomips.h has been deleted for the nanomips disassembler to
stay consistent with the rest of the disassemblers which don't include
extra header files.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-12-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The following is moved from the nanomips.h to nanomips.cpp file:
- #include line
- typedefs
- enums
- definition of the Pool struct.
Header file nanomips.h will be deleted to be consistent with the rest of
the disas/ code.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-11-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
NMD class has been deleted. The following methods are now declared as
static functions:
- public NMD::Disassemble method
- private NMD::Disassemble method
- private NMD::extract_op_code_value helper method
Also, the implementation of the print_insn_nanomips function and
nanomips_dis function is moved to the end of the nanomips.cpp file,
right after the implementation of the Disassemble function.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-10-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Pool tables are no longer declared as static fields of the NMD
class but as global static const variables. Pool struct is defined
outside of the class.
The NMD::Disassemble method is using the MAJOR Pool table variable, so
its implementation is moved to the end of the nanomips.cpp file,
right after the initialization of the MAJOR Pool table.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-9-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
NMD class methods with the disassembly_function type like
NMD::ABS_D, NMD::ABS_S, etc. are removed from the class. They're now
declared global static functions. Therefore, typedef of the function
pointer, disassembly_function is defined outside of the class.
Now that disassembly_function type functions are not part of the NMD
class we can't access them using the this pointer. Thus, the use of
the this pointer has been deleted.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-8-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
NMD class methods with the conditional_function type like
NMD::ADDIU_32__cond, NMD::ADDIU_RS5__cond, etc. are removed from the NMD
class. They're now declared global static functions. Therefore, typedef
of the function pointer, conditional_function is defined outside of the
class.
Now that conditional_function type functions are not part of the NMD
class we can't access them using the this pointer. Thus, the use of
the this pointer has been deleted.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-7-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Helper methods from NMD class like NMD::renumber_registers,
NMD::decode_gpr_gpr4... etc. are removed from the class. They're now
declared global static functions.
Following helper methods have been deleted because they're not used by
the nanomips disassembler:
- NMD::encode_msbd_from_pos_and_size,
- NMD::encode_s_from_s_hi,
- NMD::neg_copy
Global functions used by those methods:
- nanomips_dis
- sign_extend
- extract_bits
have also been defined as static global functions.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-6-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We're deleting the m_pc field of the NMD class. It's now part of the
Dis_info struct that this patch introduces. Currently, the Dis_info
struct has just one field, m_pc, which we need for address calculation
in the ADDRESS function.
We're filling Dis_info at the entrance of the nanoMIPS disassembler.
I.e. print_insn_nanomips. Next, we're adding that information as an
argument wherever we need to.
Since NMD class now has no more fields, the NMD constructor is
also deleted.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-5-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The m_requested_instruction_categories field always has the same value,
ALL_ATTRIBUTES. The only use of that field is within the if statement.
When replaced with a specific value, the if statement is always false,
so it has been removed.
Now, when the only use of the m_requested_instruction_categories field
is removed, we can delete the field declaration and initialization in
the NMD class. Also, we're changing the way of the construction of the
NMD object in the nanomips_dis function.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-4-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Definitions of enums TABLE_ENTRY_TYPE and TABLE_ATTRIBUTE_TYPE are moved
out of the NMD class. The main goal is to remove NMD class completely.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-3-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since there's no namespace feature in C, namespace img has been replaced
with adding the prefix "img" to the namespace members.
Prefix "img" has been added to the function names of functions that used
to be wrapped in namespace img. Those are img::format() functions.
I.e. replaced img::format with the img_format.
Typedef address that used to belong to namespace img now is called
img_address.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-2-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested with https://github.com/ksco/rvv-decoder-tests
Expected checkpatch errors for consistency and brevity reasons:
ERROR: line over 90 characters
ERROR: trailing statements should be on next line
ERROR: braces {} are necessary for all arms of this statement
Signed-off-by: Yang Liu <liuyang22@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220928051842.16207-1-liuyang22@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This gets especially confusing if you start plugging in host addresses
from a trace and you wonder why the output keeps changing. Report when
read_memory_func fails instead of blindly disassembling the buffer
contents.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-35-alex.bennee@linaro.org>
sideleg and sedeleg csrs are not part of riscv isa spec
anymore, these csrs were part of N extension which
is removed from the riscv isa specification.
These commits removed all traces of these csrs from
riscv spec (https://github.com/riscv/riscv-isa-manual) -
commit f8d27f805b65 ("Remove or downgrade more references to N extension (#674)")
commit b6cade07034d ("Remove N extension chapter for now")
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220824145255.400040-1-rpathak@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For rv128c shifts, a shamt of 0 is a shamt of 64, while for rv32c/rv64c
it stays 0 and is a hint instruction that does not change processor state.
For rv128c right shifts, the 6-bit shamt is in addition sign extended to
7 bits.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220710110451.245567-1-frederic.petrot@univ-grenoble-alpes.fr>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The disassembly via capstone should be superiour to our old vixl
sources nowadays, so let's finally cut this old disassembler out
of the QEMU source tree.
Message-Id: <20220603164249.112459-1-thuth@redhat.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Message-Id: <20220505173619.488350-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220412165836.355850-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Capstone should be superior to the old libopcode disassembler, so
we can drop the old file nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220412165836.355850-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Message-Id: <20220412165836.355850-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Co-authored-by: Ruibo Lu <luruibo2000@163.com>
Co-authored-by: Zewen Ye <lustrew@foxmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220423023510.30794-14-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds the support of the '-cpu rv128' option to
qemu-system-riscv64 so that we can indicate that we want to run rv128
executables.
Still, there is no support for 128-bit insns at that stage so qemu fails
miserably (as expected) if launched with this option.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-8-frederic.petrot@univ-grenoble-alpes.fr
[ Changed by AF
- Rename CPU to "x-rv128"
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit 12b6e9b27d ("disas: Clean up CPUDebug initialization")
the disassemble_info->bfd_endian enum is set for all targets in
target_disas(). We can directly call print_insn_nios2() and simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210807110939.95853-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We are going to modify this function, fix its style first.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210807110939.95853-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
With the addition of Zb[abcs], we also need to add disassembler
support for these new instructions.
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210911140016.834071-17-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Don't allocate the string until error conditions have been checked
Fixes: a00cfed0e ("Hexagon (disas) disassembler")
Eliminate Coverity CID 1460121 (Resource leak)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daud? <f4bug@amsat.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
When selecting an ARM target on Debian unstable, we get:
Compiling C++ object libcommon.fa.p/disas_libvixl_vixl_utils.cc.o
FAILED: libcommon.fa.p/disas_libvixl_vixl_utils.cc.o
c++ -Ilibcommon.fa.p -I. -I.. [...] -o libcommon.fa.p/disas_libvixl_vixl_utils.cc.o -c ../disas/libvixl/vixl/utils.cc
In file included from /home/philmd/qemu/disas/libvixl/vixl/utils.h:30,
from ../disas/libvixl/vixl/utils.cc:27:
/usr/include/string.h:36:43: error: missing binary operator before token "("
36 | #if defined __cplusplus && (__GNUC_PREREQ (4, 4) \
| ^
/usr/include/string.h:53:62: error: missing binary operator before token "("
53 | #if defined __USE_MISC || defined __USE_XOPEN || __GLIBC_USE (ISOC2X)
| ^
/usr/include/string.h:165:21: error: missing binary operator before token "("
165 | || __GLIBC_USE (LIB_EXT2) || __GLIBC_USE (ISOC2X))
| ^
/usr/include/string.h:174:43: error: missing binary operator before token "("
174 | #if defined __USE_XOPEN2K8 || __GLIBC_USE (LIB_EXT2) || __GLIBC_USE (ISOC2X)
| ^
/usr/include/string.h:492:19: error: missing binary operator before token "("
492 | #if __GNUC_PREREQ (3,4)
| ^
Relevant information from the host:
$ lsb_release -d
Description: Debian GNU/Linux 11 (bullseye)
$ gcc --version
gcc (Debian 10.2.1-6) 10.2.1 20210110
$ dpkg -S /usr/include/string.h
libc6-dev: /usr/include/string.h
$ apt-cache show libc6-dev
Package: libc6-dev
Version: 2.31-11
Partially cherry-pick vixl commit 78973f258039f6e96 [*]:
Refactor VIXL to use `extern` block when including C header
that do not have a C++ counterpart.
which is similar to commit 875df03b22 ('osdep: protect qemu/osdep.h
with extern "C"').
[*] https://git.linaro.org/arm/vixl.git/commit/?id=78973f258039f6e96
Buglink: https://bugs.launchpad.net/qemu/+bug/1914870
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20210516171023.510778-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
There are no known users of this CPU anymore, and there are no
binaries available online which could be used for regression tests,
so the code has likely completely bit-rotten already. It's been
marked as deprecated since two releases now and nobody spoke up
that there is still a need to keep it, thus let's remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210430160355.698194-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Commit message typos fixed, trivial conflicts resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make dis-asm.h handle being included outside an 'extern "C"' block;
this allows us to remove the 'extern "C"' blocks that our two C++
files that include it are using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
System headers may include templates if compiled with a C++ compiler,
which cause the compiler to complain if qemu/osdep.h is included
within a C++ source file's 'extern "C"' block. Add
an 'extern "C"' block directly to qemu/osdep.h, so that
system headers can be kept out of it.
There is a stray declaration early in qemu/osdep.h, which needs
to be special cased. Add a definition in qemu/compiler.h to
make it look nice.
config-host.h, CONFIG_TARGET, exec/poison.h and qemu/compiler.h
are included outside the 'extern "C"' block; that is not
an issue because they consist entirely of preprocessor directives.
This allows us to move the include of osdep.h in our two C++
source files outside the extern "C" block they were previously
using for it, which in turn means that they compile successfully
against newer versions of glib which insist that glib.h is
*not* inside an extern "C" block.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416135543.20382-3-peter.maydell@linaro.org
[PMM: Moved disas/arm-a64.cc osdep.h include out of its extern "C" block;
explained in commit message why we're doing this]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Actually print arguments as opposed to simply the opcodes
and, uselessly, the argument counts. Reuse all of the helpers
developed as part of the interpreter.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
An assorted set of spelling fixes in various places.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add hexagon to disas/meson.build
Add disas/hexagon.c
Add hexagon to include/disas/dis-asm.h
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1612763186-18161-6-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make CONFIG_TCG_INTERPRETER a Meson option, and enable TCI (though with
a warning) if the host CPU is unsupported, making it more similar to
other --enable-* options.
Remove TCG-specific include paths from !CONFIG_TCG builds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For compiling with -Wimplicit-fallthrough we need to fix the
fallthrough annotations in the libvixl code. This is based on
the following upstream vixl commit by Martyn Capewell:
https://git.linaro.org/arm/vixl.git/commit/?id=de326f850f736c3a337
"GCC 7 enables switch/case fallthrough checking, but this fails in
VIXL, because the annotation we use is Clang specific.
Also, fix a missing annotation in the disassembler."
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201211152426.350966-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
If we're using the capstone disassembler, disassembly of a run of
instructions more than 32 bytes long disassembles the wrong data for
instructions beyond the 32 byte mark:
(qemu) xp /16x 0x100
0000000000000100: 0x00000005 0x54410001 0x00000001 0x00001000
0000000000000110: 0x00000000 0x00000004 0x54410002 0x3c000000
0000000000000120: 0x00000000 0x00000004 0x54410009 0x74736574
0000000000000130: 0x00000000 0x00000000 0x00000000 0x00000000
(qemu) xp /16i 0x100
0x00000100: 00000005 andeq r0, r0, r5
0x00000104: 54410001 strbpl r0, [r1], #-1
0x00000108: 00000001 andeq r0, r0, r1
0x0000010c: 00001000 andeq r1, r0, r0
0x00000110: 00000000 andeq r0, r0, r0
0x00000114: 00000004 andeq r0, r0, r4
0x00000118: 54410002 strbpl r0, [r1], #-2
0x0000011c: 3c000000 .byte 0x00, 0x00, 0x00, 0x3c
0x00000120: 54410001 strbpl r0, [r1], #-1
0x00000124: 00000001 andeq r0, r0, r1
0x00000128: 00001000 andeq r1, r0, r0
0x0000012c: 00000000 andeq r0, r0, r0
0x00000130: 00000004 andeq r0, r0, r4
0x00000134: 54410002 strbpl r0, [r1], #-2
0x00000138: 3c000000 .byte 0x00, 0x00, 0x00, 0x3c
0x0000013c: 00000000 andeq r0, r0, r0
Here the disassembly of 0x120..0x13f is using the data that is in
0x104..0x123.
This is caused by passing the wrong value to the read_memory_func().
The intention is that at this point in the loop the 'cap_buf' buffer
already contains 'csize' bytes of data for the instruction at guest
addr 'pc', and we want to read in an extra 'tsize' bytes. Those
extra bytes are therefore at 'pc + csize', not 'pc'. On the first
time through the loop 'csize' happens to be zero, so the initial read
of 32 bytes into cap_buf is correct and as long as the disassembly
never needs to read more data we return the correct information.
Use the correct guest address in the call to read_memory_func().
Cc: qemu-stable@nongnu.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1900779
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201022132445.25039-1-peter.maydell@linaro.org
It is always possible to tell the length of an insn, even if the
actual insn is unknown. Skip the correct number of bytes, so that
we stay in sync with the instruction stream.
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing target-specific about this code, so it
can be added to common_ss. This also requires that the
base capstone dependency be added to common_ss, so that
we get the correct include paths added to CFLAGS.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the disas folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-9-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add fallthrough annotations to be able to compile the code without
warnings with -Wimplicit-fallthrough. Looking at the code, it seems
like the fallthrough is indeed intended here, so the comments should
be appropriate.
Message-Id: <20200630055953.9309-1-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Implement emulation of GINVT instruction. As QEMU doesn't support
caches and virtualization, this implementation covers only one
instruction (GINVT - Global Invalidate TLB) among all TLB-related
MIPS instructions.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1579883929-1517-5-git-send-email-aleksandar.markovic@rt-rk.com>
We are already including -D__STDC_LIMIT_MACROS in the global CXXFLAGS,
so it makes sense to do the same for -D__STDC_CONSTANT_MACROS and
-D__STDC_FORMAT_MACROS instead of limiting that to libvixl.
The -Wno-sign-compare option can also be removed since GCC 4.6 is not
supported anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ISA 3.0B added a set of Floating-Point Status and Control Register (FPSCR)
instructions: mffsce, mffscdrn, mffscdrni, mffscrn, mffscrni, mffsl.
This patch adds support for 'mffsl'.
'mffsl' is identical to 'mffs', except it only returns mode, status, and enable
bits from the FPSCR.
On CPUs without support for 'mffsl' (below ISA 3.0), the 'mffsl' instruction
will execute identically to 'mffs'.
Note: I renamed FPSCR_RN to FPSCR_RN0 so I could create an FPSCR_RN mask which
is both bits of the FPSCR rounding mode, as defined in the ISA.
I also fixed a typo in the definition of FPSCR_FR.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
v4:
- nit: added some braces to resolve a checkpatch complaint.
v3:
- Changed tcg_gen_and_i64 to tcg_gen_andi_i64, eliminating the need for a
temporary, per review from Richard Henderson.
v2:
- I found that I copied too much of the 'mffs' implementation.
The 'Rc' condition code bits are not needed for 'mffsl'. Removed.
- I now free the (renamed) 'tmask' temporary.
- I now bail early for older ISA to the original 'mffs' implementation.
Message-Id: <1565982203-11048-1-git-send-email-pc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The constraint for `rdinstreth` was comparing the csr number to 0xc80,
which is `cycleh` instead. Fix this.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Due to the design of the disassembler, the immediate is not
known during decoding of the opcode; so to handle compressed
encodings with reserved immediate values (non-zero), we need
to add an additional check during decompression to match
reserved encodings with zero immediates and translate them
into the illegal instruction.
The following compressed opcodes have reserved encodings with
zero immediates: c.addi4spn, c.addi, c.lui, c.addi16sp, c.srli,
c.srai, c.andi and c.slli
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Palmer: Broke long lines]
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
Commit dc99065b5f (v0.1.0) added dis-asm.h from binutils.
Commit 43d4145a98 (v0.1.5) inlined bfd.h into dis-asm.h to remove the
dependency on binutils.
Commit 76cad71136 (v1.4.0) moved dis-asm.h to include/disas/bfd.h.
The new name is confusing when you try to match against (pre GPLv3+)
binutils. Rename it back. Keep it in the same directory, of course.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Remove machine generated constraints that are not
referenced by the pseudo-instruction constraints.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add graphical description of nanoMIPS instruction pool organization.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-3-git-send-email-aleksandar.markovic@rt-rk.com>
Correct comments to handlers of some DSP instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-2-git-send-email-aleksandar.markovic@rt-rk.com>
Rename function extract_ac_13_12() to extract_ac_15_14().
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-3-git-send-email-aleksandar.markovic@rt-rk.com>
Amend some DSP instructions related comments.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
There are not many, and they are all simple mistakes that ended up
being committed. Remove them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-2-pbonzini@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add "nanoMIPS32 Instruction Set Technical Reference Manual" as
a reference.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reorder declarations and definitions of gpr decoders by number of
input bits of corresponding encoding type.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Comment the decoder of 'gpr1' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename the decoder of 'gpr1' gpr encoding type in nanoMIPS
disassembler.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
