Present code uses fid as the part of message data of msix for looking
up the specific zpci device. However it limits the usable range of fid,
and the code looking up the zpci device may fail due to truncation of
the fid.
In addition, fh is composed of enabled bit, FH_VIRT and the array index.
So we can use the array index as the identifier to store in msg data.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Firstly the function misses dmaas checking. This patch adds it.
Secondly the function uses s390_pci_find_dev_by_fh() to look up the
zpci device. This may fail if the guest provides a valid and disabled
fh but fh of the associated zpci device is enabled. Thus we use
s390_pci_find_dev_by_idx() instead.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Because of the refactor of s390_pci_find_dev_by_idx(), list_pci()
should be updated. We introduce a new function to get the next
available zpci device. It simplifies the code of looking up zpci
devices.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
s390_find_dev_by_idx() only indexes usable zpci devices. It implies
that the index value of each zpci device is dynamic and may change if
a new zpci device is plugged. So we have to use a constant index to
look up the device.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The code in CLP_SET_PCI_FN case misses some checkings. Let's add
them.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We need to support hot-plug/hot-unplug for the new zpci devices as
well. This patch enables the present hot-plug/hot-unplug handlers
to support not only generic pci devices but also zpci devices.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The uid-checking facility guarantees uniqueness of the uid within the
vm and exposes the real uid to the guest when listing pci devices.
Let's always enable it and present it to the guest in the response to
the list pci clp command.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
To support definitions of s390 pci attributes in Qemu cmdline, we have
to make current S390PCIBusDevice struct inherit DeviceState and add
three properties for it. Currently we only support definitions of uid
and fid.
'uid' is optionally defined by users, identifies a zpci device and
must be defined with a 16-bit and non-zero unique value.
'fid' ranges from 0x0 to 0xFFFFFFFF. For fid property, we introduce a
new PropertyInfo by the name of s390_pci_fid_propinfo with our special
setter and getter. As 'fid' is optional, introduce 'fid_defined' to
track whether the user specified a fid.
'target' field is to direct qemu to find the corresponding generic PCI
device. It is equal to the 'id' value of one of generic pci devices.
If the user doesn't specify 'id' parameter for a generic pci device,
its 'id' value will be generated automatically and use this value as
'target' to create an associated zpci device.
If the user did not specify 'uid' or 'fid', values are generated
automatically. 'target' is required.
In addition, if a pci device has no associated zpci device, the code
will generate a zpci device automatically for it.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently each zpci device holds its own DMA address space and memory
region. At the same time, all instances of zpci device are stored in
S390pciState. So duirng the initialization of S390pciState, all zpci
devices are created and then all DMA address spaces are created. Thus,
when initializing pci devices, their corresponding DMA address spaces
could be found.
But zpci qdev will be introduced later. Zpci device may be initialized
and plugged afterwards generic pci device. So we should initialize all
DMA address spaces and memory regions before initializing zpci devices.
We introduce a new struct named S390PCIIOMMU. And a new field of
S390pciState, which is an array to store all instances of S390PCIIOMMU,
is added so that qemu pci code could find the corresponding DMA
address space when initializing a generic pci device. And this should
be done before the connection of a zpci device and a generic pci
device is built.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
To enable S390PCIBusDevice as qdev, there should be a new bus to
plug and manage all instances of S390PCIBusDevice. Due to this,
S390PCIBus is introduced.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Current code uses some fields combinatorially to indicate the state of
a s390 pci device. This patch introduces device states in order to make
the code more readable and more logical.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Because this function is called very frequently, we should use a more
effective way to find the zpci device. So we use the FH's index to get
the device directly.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Present code uses some macros to structure PCI Function Handle. But
their names don't have a uniform format. Let's use FH_MASK_ as the
unified prefix.
While we're at it, differentiate the SHM bits: use different bits for
vfio and emulated devices.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We forgot to write the fid; fix that.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
There are a number of places where the code needs to get the instance
of S390pciState. It calls object_resolve_path() every time. This
wastes a lot of time and leads to low performance. Thus we add
s390_get_phb() to improve it.
Because we always have a phb, we remove all return checkings in the
callers and add an assert in s390_get_phb() to make sure that phb is
getted successfully.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In commit d78c19b5cf, vfio code stores
the IOMMU's offset_within_address_space and adjusts the IOVA before
calling vfio_dma_map/vfio_dma_unmap. But s390_translate_iommu already
considers the base address of an IOMMU memory region.
Thus we use pal as the size and 0x0 as the base address to initialize
IOMMU memory subregion.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The previous patch moved virtual css bridge and bus out from
virtio-ccw, but kept the direct reference of virtio-ccw specific
unplug function inside css-bridge.c.
To make the virtual css bus and bridge useful for non-virtio devices,
this introduces a common unplug function pointer "unplug" to call
specific virtio-ccw unplug parts. Thus, the tight coupling to
virtio-ccw can be removed.
This unplug pointer is a member of CCWDeviceClass, which is introduced
as an abstract device layer called "ccw-device". This layer is between
DeviceState and specific devices which are plugged in virtual css bus,
like virtio-ccw device. The specific unplug handlers should be assigned
to "unplug" during initialization.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently, common base layers virtual css bridge and bus are
defined in hw/s390x/virtio-ccw.c(h). In order to support
multiple types of devices in the virtual channel subsystem,
especially non virtio-ccw, refactoring work needs to be done.
This work is just a pure code move without any functional change
except dropping an empty function virtual_css_bridge_init() and
virtio_ccw_busdev_unplug() changing. virtio_ccw_busdev_unplug()
is specific to virtio-ccw but gets referenced from the common
virtual css bridge code. To keep the functional changes to a
minimum we export this function from virtio-ccw.c and continue
to reference it inside virtual_css_bridge_class_init()
(now living in hw/s390x/css-bridge.c). A follow-up patch will
clean this up.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce a TYPE_* define (like we already use for a couple of other
QOM types) for the name of the virtual CSS bridge QOM type instead of
sprinkling the same string literal over several source files.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
A lot of what virtio_ccw_device_realize() does isn't specific to
virtio; it would apply to emulated CCW as well. Factor it out to make
it easier to implement emulated CCW devices later on.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When migrating from a different QEMU version, the start_address and
bios_start_address may differ. During migration these values are migrated
and overwrite the values that were detected by QEMU itself.
On a reboot, QEMU will reload its own BIOS, but use the migrated start
addresses, which does not work if the values differ.
Fix this by not relying on the migrated values anymore, but still
provide them during migration, so existing QEMUs continue to work.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If bootindex is specified for a device, we need to IPL from
it. Currently it works for ccw devices, but not for SCSI. To be able to
IPL from the specific device, pc-bios needs to know its address.
For this reason we add special QEMU_SCSI IPL type into the IPLB
structure, that contains the scsi device address.
We enhance the ipl block with a currently qemu-only parameter block
that allows us to specify a concrete scsi device.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
There is ,bootindex=%d argument to specify the lookup order of
boot devices.
If a bootindex assigned to the device, then IPL Parameter Info Block
is created for that device when it is IPLed from.
If it is a mere SCSI device (not FCP), then IPIB is created with a
special SCSI type and its fields are used to store SCSI address of the
device. This new ipl block is private to qemu for now.
If the device to IPL from is specified this way, then SCSI bus lookup
is bypassed and prescribed devices uses the address specified.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
For clang before 3.5, -fno-integrated-as does not exist,
so the workaround in 5f6f0e27fb fails to build.
Use clang's default assembler for linux-user/safe-syscall.S,
and explicitly change to use the system assembler for the
option roms.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In user-mode emulation Translation Block can consist of 2 guest pages.
In that case QEMU also mprotects 2 host pages that are dedicated for
guest memory, containing instructions. QEMU detects self-modifying code
with SEGFAULT signal processing.
In case if instruction in 1st page is modifying memory of 2nd
page (or vice versa) QEMU will mark 2nd page with PAGE_WRITE,
invalidate TB, generate new TB contatining 1 guest instruction and
exit to CPU loop. QEMU won't call mprotect, and new TB will cause
same SEGFAULT. Page will have both PAGE_WRITE_ORG and PAGE_WRITE
flags, so QEMU will handle the signal as guest binary problem,
and exit with guest SEGFAULT.
Solution is to do following: In case if current TB was invalidated
continue to invalidate TBs from remaining guest pages and mark pages
as PAGE_WRITE. After that disable host page protection with mprotect.
If current tb was invalidated longjmp to main loop. That is more
efficient, since we won't get SEGFAULT when executing new TB.
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Signed-off-by: Stanislav Shmarov <snarpix@gmail.com>
Message-Id: <1467880392-1043630-1-git-send-email-snarpix@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As it currently stands, QEMU does not properly handle self-modifying code
when the write is unaligned and crosses a page boundary. The procedure
for handling a write to the current translation block is to write-protect
the current translation block, catch the write, split up the translation
block into the current instruction (which remains write-protected so that
the current instruction is not modified) and the remaining instructions
in the translation block, and then restore the CPU state to before the
write occurred so the write will be retried and successfully executed.
However, since unaligned writes across pages are split into one-byte
writes for simplicity, writes to the second page (which is not the
current TB) may succeed before a write to the current TB is attempted,
and since these writes are not invalidated before resuming state after
splitting the TB, these writes will be performed a second time, thus
corrupting the second page. Credit goes to Patrick Hulin for
discovering this.
In recent 64-bit versions of Windows running in emulated mode, this
results in either being very unstable (a BSOD after a couple minutes of
uptime), or being entirely unable to boot. Windows performs one or more
8-byte unaligned self-modifying writes (xors) which intersect the end
of the current TB and the beginning of the next TB, which runs into the
aforementioned issue. This commit fixes that issue by making the
unaligned write loop perform the writes in forwards order, instead of
reverse order. This way, QEMU immediately tries to write to the current
TB, and splits the TB before any write to the second page is executed.
The write then proceeds as intended. With this patch applied, I am able
to boot and use Windows 7 64-bit and Windows 10 64-bit in QEMU without
KVM.
Per Richard Henderson's input, this patch also ensures the second page
is in the TLB before executing the write loop, to ensure the second
page is mapped.
The original discussion of the issue is located at
http://lists.nongnu.org/archive/html/qemu-devel/2014-08/msg02161.html.
Signed-off-by: Samuel Damashek <samuel.damashek@invincea.com>
Message-Id: <20160706182652.16190-1-samuel.damashek@invincea.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
[rth: Split out from the original patch.]
Signed-off-by: Samuel Damashek <samuel.damashek@invincea.com>
Message-Id: <20160706182652.16190-1-samuel.damashek@invincea.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Clang insists that "cmp" is ambiguous with a memory destination,
requiring an explicit size suffix.
There was a true error in the use of .cfi_def_cfa_offset in the
epilogue, but changing to use the proper .cfi_adjust_cfa_offset
runs afoul of a clang bug wrt .cfi_restore_state. Better to
fold the two epilogues so that we don't trigger the bug.
Signed-off-by: Richard Henderson <rth@twiddle.net>
If -cpu host is used, LMCE will be automatically enabled when it's
supported by host.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's a prerequisite that certain bits of MSR_IA32_FEATURE_CONTROL should
be set before some features (e.g. VMX and LMCE) can be used, which is
usually done by the firmware. This patch adds a fw_cfg file
"etc/msr_feature_control" which contains the advised value of
MSR_IA32_FEATURE_CONTROL and can be used by guest firmware (e.g. SeaBIOS).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch adds the support to inject SRAR and SRAO as LMCE, i.e. they
are injected to only one VCPU rather than broadcast to all VCPUs. As KVM
reports LMCE support on Intel platforms, this features is only available
on Intel platforms.
LMCE is disabled by default and can be enabled/disabled by cpu option
'lmce=on/off'.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
[Haozhong: Enable LMCE only on Intel platforms
Disable LMCE by default and add a cpu option 'lmce'
Handle the error if LMCE is enabled w/o host support
Remove MCG_LMCE_P from MCE_CAP_DEF
Add migration support for LMCE
Minor code style changes]
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This change adds hyperv feature words report through qom rpc.
When VM is configured with hyperv features enabled
libvirt will check that required feature words are set
in cpuid leaf 40000003 through qom request.
Currently qemu does not report hyperv feature words
which prevents windows guests from starting with libvirt.
To avoid conflicting with current hyperv properties all added feature
words cannot be set directly with -cpu +feature yet.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Improve the TSC frequency mismatch warning to show the host and
VM TSC frequencies.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Considering that features are converted to global properties and
global properties are automatically applied to every new instance
of created CPU (at object_new() time), there is no point in
parsing cpu_model string every time a CPU created. So move
parsing outside CPU creation loop and do it only once.
Parsing also should be done before any CPU is created so that
features would affect the first CPU a well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Considering that features are converted to global properties and
global properties are automatically applied to every new instance
of created CPU (at object_new() time), there is no point in
parsing cpu_model string every time a CPU created. So move
parsing outside CPU creation loop and do it only once.
Parsing also should be done before any CPU is created so that
features would affect the first CPU a well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently CPUClass->parse_features() is used to parse -cpu
features string and set properties on created CPU instances.
But considering that features specified by -cpu apply to every
created CPU instance, it doesn't make sense to parse the same
features string for every CPU created. It also makes every target
that cares about parsing features string explicitly call
CPUClass->parse_features() parser, which gets in a way if we
consider using generic device_add for CPU hotplug as device_add
has not a clue about CPU specific hooks.
Turns out we can use global properties mechanism to set
properties on every created CPU instance for a given type. That
way it's possible to convert CPU features into a set of global
properties for CPU type specified by -cpu cpu_model and common
Device.device_post_init() will apply them to CPU of given type
automatically regardless whether it's manually created CPU or CPU
created with help of device_add.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
x86_cpu_parse_featurestr has a "val = num;" assignment just before num
goes out of scope. Push num up to fix the issue.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
ERMS just says "rep movsb" and "rep stosb" are fast. It does not
imply any new instruction, so we can support it easily.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Make SPARC target use sparc_cpu_parse_features() directly
so it won't get in the way of switching other propertified
targets to handling features as global properties.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use the new GlobalProperty.errp field to handle compat_props
errors.
Example output before this change:
(with an intentionally broken entry added to PC_COMPAT_1_3 just
for testing)
$ qemu-system-x86_64 -machine pc-1.3
qemu-system-x86_64: hw/core/qdev-properties.c:1091: qdev_prop_set_globals_for_type: Assertion `prop->user_provided' failed.
Aborted (core dumped)
After:
$ qemu-system-x86_64 -machine pc-1.3
Unexpected error in x86_cpuid_set_vendor() at /home/ehabkost/rh/proj/virt/qemu/target-i386/cpu.c:1688:
qemu-system-x86_64: can't apply global cpu.vendor=x: Property '.vendor' doesn't take value 'x'
Aborted (core dumped)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The new field will allow error handling to be configured by
qdev_prop_register_global() callers: &error_fatal and
&error_abort can be used to make QEMU exit or abort if any errors
are reported when applying the properties.
While doing it, change the error message from "global %s.%s=%s
ignored" to "can't apply global %s.%s=%s".
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The function is just a helper to handle the -global options, it
can stay in vl.c like most qemu_opts_foreach() calls.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
qdev_prop_set_globals_for_type() stops applying global properties
on the first error. It is a leftover from when QEMU exited on any
error when applying global property. Commit 25f8dd9 changed the
fatal error to a warning, but neglected to drop the stopping.
Fix that.
For example, the following command-line will not set CPUID level
to 3, but will warn only about "x86_64-cpu.vendor" being ignored.
$ ./x86_64-softmmu/qemu-system-x86_64 \
-global x86_64-cpu.vendor=x \
-global x86_64-cpu.level=3
qemu-system-x86_64: Warning: global x86_64-cpu.vendor=x ignored: Property '.vendor' doesn't take value 'x'
Fix this by not returning from qdev_prop_set_globals_for_type()
on the first error.
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* fix a wrong variable type for A64 SYS_HEAPINFO semihosting call
* xlnx_dp: fix iffy xlnx_dp_aux_push_tx_fifo
* aux: fix break that wanted to break two levels out
* aux: Rename aux.[ch] to auxbus.[ch] for the benefit of Windows
* hw/block/m25p80: fix resource leak
* i.MX: split the GPT timer implementation into per SOC definitions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uKU5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160707' into staging
target-arm queue:
* fix a wrong variable type for A64 SYS_HEAPINFO semihosting call
* xlnx_dp: fix iffy xlnx_dp_aux_push_tx_fifo
* aux: fix break that wanted to break two levels out
* aux: Rename aux.[ch] to auxbus.[ch] for the benefit of Windows
* hw/block/m25p80: fix resource leak
* i.MX: split the GPT timer implementation into per SOC definitions
# gpg: Signature made Thu 07 Jul 2016 14:48:09 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20160707:
i.MX: split the GPT timer implementation into per SOC definitions
hw/block/m25p80: fix resource leak
aux: Rename aux.[ch] to auxbus.[ch] for the benefit of Windows
aux: fix break that wanted to break two levels out
xlnx_dp: fix iffy xlnx_dp_aux_push_tx_fifo
target-arm/arm-semi.c: In SYS_HEAPINFO use correct type for 'limit'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In various Freescale SOCs, the GPT timers can be configured to select
its input clock.
Depending on the SOC the set of available input clocks may vary.
The actual single GPT definition was no good enough and because of it
booting the sabrelite board with a i.MX6DL device tree would fail
because of an incorrect input clock definition for the i.MX6DL SOC.
This patch fixes the i.MX6DL boot failure by adding the ability to
define a different set of input clocks depending on the considered SOC.
A different class has been defined for i.MX25, i.MX31 and i.MX6 each with
its specific set of input clocks.
The patch has been tested by booting KZM, i.MX25 PDK, i.MX6Q sabrelite
and i.MX6DL sabrelite.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 1467325619-8374-1-git-send-email-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed spacing round '/' operator]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These two are spot by Coverity 1357232 and 1357233.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1467684998-12076-1-git-send-email-zhaoshenglong@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On Windows 'aux.*' is a reserved name and cannot be used for
filenames; see
https://msdn.microsoft.com/en-gb/library/windows/desktop/aa365247(v=vs.85).aspx
This prevents cloning the QEMU git repo on Windows:
C:\Java\sources\kvm> git clone https://github.com/qemu/qemu.git
Cloning into 'qemu'...
remote: Counting objects: 279563, done.
remote: Total 279563 (delta 0), reused 0 (delta 0), pack-reused 279563R
Receiving objects: 100% (279563/279563), 122.45 MiB | 3.52 MiB/s, done.
Resolving deltas: 100% (221942/221942), done.
Checking connectivity... done.
error: unable to create file hw/misc/aux.c (No such file or directory)
error: unable to create file include/hw/misc/aux.h (No such file or directory)
Checking out files: 100% (4795/4795), done.
fatal: unable to checkout working tree
warning: Clone succeeded, but checkout failed.
You can inspect what was checked out with 'git status'
and retry the checkout with 'git checkout -f HEAD'
(bug https://bugs.launchpad.net/bugs/1595240)
Rename the offending files for the benefit of Windows.
Reported-by: Алексей Курган <akurgan@yandex.ru>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1467377145-32385-1-git-send-email-peter.maydell@linaro.org
