Factor out cpu core unplug into separate function from
spapr_core_release(). Then use generic hotplug_handler_unplug() to trigger
cpu core unplug, which would call spapr_machine_device_unplug() ->
spapr_core_unplug() in the end.
This way unplug operation is not buried in spapr internals and located
in the same place like in other targets, following similar
logic/call chain across targets.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Factor out memory unplug into separate function from spapr_lmb_release().
Then use generic hotplug_handler_unplug() to trigger memory unplug,
which will call spapr_machine_device_unplug() -> spapr_memory_unplug()
in the end.
This way unplug operation is not buried in lmb internals and located in
the same place like in other targets, following similar logic/call chain
across targets.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We'll be handling unplug of e.g. CPUs and PCDIMMs via the general
hotplug handler soon, so let's add that handler function.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Let's finish cleaning up the hotplug handler. This check can be
performed in the pre_plug code as the very first thing.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Let's clean the hotplug handler up by moving lookup of the node into
the function where it is actually being used.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The node property can always be queried and the value has already been
verified in pc_dimm_realize().
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to PowerISA, the PIR register should be readable in privileged
mode also, not only in hypervisor privileged mode.
PowerISA 3.0 - 4.3.3 Processor Identification Register
"Read access to the PIR is privileged; write access is not provided."
Figure 18 in section 4.4.4 explicitly confirms that mfspr PIR is privileged
and doesn't require hypervisor state.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Leandro Lupori <leandro.lupori@gmail.com>
Reviewed-by: Jose Ricardo Ziviani <joserz@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make it more readable by converting register indexes to decimal
(avoids lot of superfluous 0x0) and distinguish errors caused by
accessing non-existent vs. unimplemented registers.
No functional change.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER9 introduced a new variant of the eieio instruction using bit 6
as a hint to tell the CPU it is a store-forwarding barrier.
The usage of this eieio extension was recently added in Linux 4.17
which activated the "support for a store forwarding barrier at kernel
entry/exit".
Unfortunately, it is not possible to insert this new eieio instruction
without considerable change in ppc_tr_translate_insn(). So instead we
loosen the QEMU eieio instruction mask and modify the gen_eieio()
helper to test for bit6. On non-POWER9 CPUs, the bit6 is just ignored
but a warning is emitted as this is not an instruction software should
be using.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The timers are configured in the mos6522 init function and therefore will
always exist, so the function can never return false.
Peter also pointed out that this is the only remaining user of
VMSTATE_TIMER_PTR_TEST in the codebase, so we might as well just convert it
over to VMSTATE_TIMER_PTR and remove mos6522_timer_exist() as it is no
longer required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 6522 VIA timer frequency cannot be set by altering registers within the
device itself and hence it is a fixed property of the machine.
Move the initialisation of the timer frequency to the mos6522 reset function
and ensure that any subclasses always call the parent reset function so that
it isn't required to store the timer frequency within vmstate_mos6522_timer
itself.
By moving the frequency initialisation to the device reset function then we
find that the realize function for both mos6522 and mos6522_cuda becomes
obsolete and can simply be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Examining the migration stream it can be seen that the mos6522 device state is
being stored separately rather than as part of the CUDA device which is
incorrect (and likely to cause issues if another mos6522 device is added to
the machine).
Resolve this by embedding the mos6522_cuda device directly within the CUDA
device rather than using a QOM object link to reference the device separately.
Note that we also bump the version in vmstate_cuda to reflect this change: this
isn't particularly important for the moment as the Mac machine migration isn't
100% reliable due to issues migrating the timebase under TCG.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This was accidentally introduced when extracting the 6522 VIA functionality
from the CUDA device, and prevents loadvm from completing successfully.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is used in OpenBIOS to define the memory layout of the NVRAM device. Whilst
currently left at its default value, add the missing definition to ensure it is
reserved.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commits b6712ea391 removed the macio_init() function but missed the header
prototype in mac.h. Remove it since it is no longer needed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commits 7b19318bee and 8ce3f743c7 removed the pci_pmac_init() and
pci_pmac_u3_init() functions but missed the header prototypes in mac.h. Remove
them since they are no longer needed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows KVM with the Book3S radix MMU mode to take advantage of
THP and install larger pages in the partition scope page tables (the
host translation).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
VIO devices have an "irq" property that can be used by the sPAPR IRQ
allocator as an IRQ number hint. But it is not set in QEMU nor in
libvirt. It brings unnecessary complexity to the underlying layers
managing the IRQ number space and it is in full opposition with the
new static IRQ allocator we want to introduce in sPAPR.
Let's deprecate it to simplify the spapr_irq_alloc routine in the
future.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
[dwg: Check qtest_enabled() to suppress bogus warnings from make check]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The powerpc Linux kernel[1] and skiboot firmware[2] recently gained changes
that cause the Processor Compatibility Register (PCR) SPR to be cleared.
These changes cause Linux to fail to boot on the Qemu powernv machine
with an error:
Trying to write privileged spr 338 (0x152) at 0000000030017f0c
With this patch Qemu makes this register available as a hypervisor
privileged register.
Note that bits set in this register disable features of the processor.
Currently the only register state that is supported is when the register
is zeroed (enable all features). This is sufficient for guests to
once again boot.
[1] https://lkml.kernel.org/r/20180518013742.24095-1-mikey@neuling.org
[2] https://patchwork.ozlabs.org/patch/915932/
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Factor out the parsing of struct kvm_ppc_cpu_char in
kvmppc_get_cpu_characteristics() into a separate function for each cap
for simplicity.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 72d3d8f052 "hw/isa/superio: Add a keyboard/mouse controller (8042)"
added an 8042 keyboard device to the PC87312 superio device to replace that
being used by the prep machine.
Unfortunately this commit didn't do the same for the 40p machine which broke
the keyboard by registering two 8042 keyboard devices at the same address.
Resolve this by similarly removing the 8042 keyboard from the 40p machine as
done for the prep machine in commit 72d3d8f052.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Linux sandalfoot zImage has an initialisation process which resets the
VGA controller by setting all the BAR addresses to zero to access the VGA
ioports at their legacy addresses.
Unfortunately setting the framebuffer BAR to address 0 makes the framebuffer
memory overlap the internal VGA memory causing accesses to fail, and so
prevents the kernel from switching successfully to text mode.
Since OpenHackWare configures the framebuffer BAR address outside of the legacy
VGA internal memory space, remove pci_allow_0_address from the 40p machine class
which causes the BAR reprogramming to zero to fail and so the VGA internal
memory can be accessed correctly again.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
fprintf() and qemu_log_separate() are frowned upon these days for printing
logging information in QEMU. Accessing the wrong SPRs indicates wrong guest
behaviour in most cases, and we've got a proper way to log such situations,
which is the qemu_log_mask(LOG_GUEST_ERROR, ...) function. So use this
function now for logging the bad SPR accesses instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use error_report() + abort() instead of error_setg(&error_abort),
as suggested by the "qapi/error.h" documentation:
Please don't error_setg(&error_fatal, ...), use error_report() and
exit(), because that's more obvious.
Likewise, don't error_setg(&error_abort, ...), use assert().
Use abort() instead of the suggested assert() because the error message
already got displayed.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
>From observation of various OS sources it can be seen that the token register
introduced in 4e46dcdbd3 "PPC: Newworld: Add uninorth token register" is not
required, since the only register currently implemented is the uninorth hardware
version which is read-only.
Remove the token register implementation and instead return the uninorth
version corresponding to the hardware.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace the "nvdimm-cap" option which took numeric arguments such as "2"
with a more user friendly "nvdimm-persistence" option which takes symbolic
arguments "cpu" or "mem-ctrl".
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit:
commit aa78a16d86 ("hw/i386: Rename 2.13 machine types to 3.0")
updated the name used to create the q35 machine, which in turn changed the
SSDT table which is generated when we run "make check":
acpi-test: Warning! SSDT mismatch. Actual [asl:/tmp/asl-QZDWJZ.dsl,
aml:/tmp/aml-T8JYJZ], Expected [asl:/tmp/asl-DTWVJZ.dsl,
aml:tests/acpi-test-data/q35/SSDT.dimmpxm].
Here's the only difference, aside from the checksum:
< Name (MEMA, 0x07FFF000)
---
> Name (MEMA, 0x07FFE000)
Update the binary table that we compare against so it reflects this name
change.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Fixes: commit aa78a16d86 ("hw/i386: Rename 2.13 machine types to 3.0")
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is needed, for example, to create a new bitmap and merge several
disabled bitmaps into a new one. Without this flag we will have to
put block-dirty-bitmap-add and block-dirty-bitmap-disable into one
transaction.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Expose the ability to turn bitmaps "on" or "off". This is experimental
and principally for the sake of the Libvirt Checkpoints API, and it may
or may not be committed for 3.0.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add locks and remove comments about BQL accordingly to
dirty_bitmap_mutex definition in block_int.h.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
QLIST_REMOVE does not require walking the list, and once the "bitmap"
argument is removed from bdrv_do_release_matching_dirty_bitmap_locked
the code simplifies a lot and it is worth inlining everything in the
callers of bdrv_do_release_matching_dirty_bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180326104037.6894-1-pbonzini@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
All this function is doing will be repeated by
bdrv_do_release_matching_dirty_bitmap_locked, except
resetting bm->persistent. But even that does not matter
because the bitmap will be freed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180323164254.26487-1-pbonzini@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
After 047f7038f5 it is possible for event loop to run two
times. First time whilst parsing command line options (the idea
is to bring up monitor early so that management applications can
tweak config before machine is initialized). And the second time
is after everything is set up (this is the usual place). In both
cases the event loop is called as main_loop_wait(nonblocking =
false) which causes the event loop to block until at least one
event occurred.
Now, consider that somebody (i.e. libvirt) calls us with
-daemonize. This operation is split in two steps. The main()
calls os_daemonize() which fork()-s and then waits in read()
until child notifies it via write():
/qemu.git $ ./x86_64-softmmu/qemu-system-x86_64 -S -daemonize \
-no-user-config -nodefaults -nographic
main(): child:
os_daemonize():
read(pipe[0])
main_loop():
main_loop_wait(false)
os_setup_post():
write(pipe[1])
main_loop():
main_loop_wait(false)
Here it can be clearly seen that main() does not exit until an
event occurs, but at the same time nobody will touch the monitor
socket until their exec("qemu-system-*") finishes. So the whole
thing deadlocks.
The solution is to not call main_loop_wait() unless --preconfig was
specified (in which case caller knows they must connect to the
socket before exec() finishes).
Patch also fixes hang when -nodefaults option is used, which were
causing QEMU hang in the early main_loop_wait() indefinitely by
the same means (not calling main_loop_wait() unless --preconfig
is present on CLI)
Based on
From: Michal Privoznik <mprivozn@redhat.com>
Subject: [PATCH] cli: Don't run early event loop if no --preconfig was specified
Message-Id: <ad910973c593c5ac2fed3a10ea958f7e9c12f82c.1527935663.git.mprivozn@redhat.com>
Fixes: 047f7038f5
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1528207243-268226-2-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- Various bug fixes
- Removal of qemu-img convert's deprecated -s option
- qemu-io now exits with an error when a command failed
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbHoXuAAoJEPQH2wBh1c9AyDYIAJ4jp0Uw4Taw9L6qOM/J44Ui
g6HNujGZoSHejRemiXHfKVozHHbkkNje0UVJJH7lKAPdPy1BtoThAXNfoqSP6mMg
frsOVMjGJSzPxodmGlFRgnQXNJKWsxrXWJgrGCygwEAlDPnlJxqPpMgHP49H+0QF
XHWUGPLUebHTdz5LaLOMfkY3e6hFw9EgrlSOsKI3J0ik1kpE2A/+kplAjX54eA7d
zMyrVQUklYiGYN96QGqWqQgGLMJ1XmCYzs8Rx7fFhdBwZ+6Baana2RbOTfDN/tKr
HtzDrKwJx3QaawoyBL6WCcoUzXdE868MnqwZ+SriIYna9kPgxB5tFVmdfIbhgCQ=
=HVjp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2018-06-11' into staging
Block patches:
- Various bug fixes
- Removal of qemu-img convert's deprecated -s option
- qemu-io now exits with an error when a command failed
# gpg: Signature made Mon 11 Jun 2018 15:23:42 BST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2018-06-11: (29 commits)
iotests: Add case for a corrupted inactive image
qcow2: Do not mark inactive images corrupt
block: Make bdrv_is_writable() public
throttle: Fix crash on reopen
block/qcow2-bitmap: fix free_bitmap_clusters
qemu-img: Remove deprecated -s snapshot_id_or_name option
iotests: Fix 219's timing
iotests: improve pause_job
iotests: Test post-backing convert target behavior
qemu-img: Special post-backing convert handling
iotests: Add test for rebasing with relative paths
qemu-img: Resolve relative backing paths in rebase
iotests: Let 216 make use of qemu-io's exit code
iotests.py: Add qemu_io_silent
qemu-io: Exit with error when a command failed
qemu-io: Let command functions return error code
qemu-io: Drop command functions' return values
iotests: Repairing error during snapshot deletion
qcow2: Repair OFLAG_COPIED when fixing leaks
iotests: Rework 113
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When signaling a corruption on a read-only image, qcow2 already makes
fatal events non-fatal (i.e., they will not result in the image being
closed, and the image header's corrupt flag will not be set). This is
necessary because we cannot set the corrupt flag on read-only images,
and it is possible because further corruption of read-only images is
impossible.
Inactive images are effectively read-only, too, so we should do the same
for them. bdrv_is_writable() can tell us whether an image can actually
be written to, so use its result instead of !bs->read_only.
(Otherwise, the assert(!(bs->open_flags & BDRV_O_INACTIVE)) in
bdrv_co_pwritev() will fail, crashing qemu.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is a useful function for the whole block layer, so make it public.
At the same time, users outside of block.c probably do not need to make
use of the reopen functionality, so rename the current function to
bdrv_is_writable_after_reopen() create a new bdrv_is_writable() function
that just passes NULL to it for the reopen queue.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The throttle block filter can be reopened, and with this it is
possible to change the throttle group that the filter belongs to.
The way the code does that is the following:
- On throttle_reopen_prepare(): create a new ThrottleGroupMember
and attach it to the new throttle group.
- On throttle_reopen_commit(): detach the old ThrottleGroupMember,
delete it and replace it with the new one.
The problem with this is that by replacing the ThrottleGroupMember the
previous value of io_limits_disabled is lost, causing an assertion
failure in throttle_co_drain_end().
This problem can be reproduced by reopening a throttle node:
$QEMU -monitor stdio
-object throttle-group,id=tg0,x-iops-total=1000 \
-blockdev node-name=hd0,driver=qcow2,file.driver=file,file.filename=hd.qcow2 \
-blockdev node-name=root,driver=throttle,throttle-group=tg0,file=hd0,read-only=on
(qemu) block_stream root
block/throttle.c:214: throttle_co_drain_end: Assertion `tgm->io_limits_disabled' failed.
Since we only want to change the throttle group on reopen there's no
need to create a ThrottleGroupMember and discard the old one. It's
easier if we simply detach it from its current group and attach it to
the new one.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180608151536.7378-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This assert may fail, because bitmap_table is not initialized. Just
drop it, as it's obvious, that bitmap_table_load sets bitmap_table
parameter only when returning zero.
Reported-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180608101225.2575-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It has been marked as deprecated since QEMU v2.0 already, so it
is time now to finally remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1528288551-31641-1-git-send-email-thuth@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
219 has two issues that may lead to sporadic failure, both of which are
the result of issuing query-jobs too early after a job has been
modified. This can then lead to different results based on whether the
modification has taken effect already or not.
First, query-jobs is issued right after the job has been created.
Besides its current progress possibly being in any random state (which
has already been taken care of), its total progress too is basically
arbitrary, because the job may not yet have been able to determine it.
This patch addresses this by just filtering the total progress, like
what has been done for the current progress already. However, for more
clarity, the filtering is changed to replace the values by a string
'FILTERED' instead of deleting them.
Secondly, query-jobs is issued right after a job has been resumed. The
job may or may not yet have had the time to actually perform any I/O,
and thus its current progress may or may not have advanced. To make
sure it has indeed advanced (which is what the reference output already
assumes), keep querying it until it has.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606190628.8170-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's possible, that job was finished during waiting. In this case we
will see error message "Timeout waiting for job to pause" which is not
very informative. So, let's check during waiting iteration that the job
exists.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180601115923.17159-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
